Microwave pretreatment of rape straw for bioethanol production: focus on energy efficiency

The energy efficiency of microwave-assisted dilute sulfuric acid pretreatment of rape straw for the production of ethanol was investigated. Different microwave energy inputs and solid loadings were tested to find economic pretreatment conditions. The lowest energy consumption was observed when solid loading and energy input were fixed at 50% (w/w) and 54 kJ (900 W for 1 min), respectively, and amounted to 5.5 and 10.9 kJ to produce 1 g of glucose after enzymatic hydrolysis and 1 g ethanol after fermentation, respectively. In general, 1 g ethanol can produce about 30 kJ of energy, and therefore, the energy input for the pretreatment was only 35% of the energy output. The approach developed in this study resulted in 92.9% higher energy savings for producing 1 g ethanol when compared with the results of microwave pretreatments previously reported.     

Improved bioethanol production from corn stover by alkali pretreatment with a novel pilot-scale continuous microwave irradiation reactor

A novel continuous microwave irradiation (MWI) pilot-scale reactor was designed specifically for biomass pretreatment. To test the efficiency of this reactor, MWI-assisted alkali pretreatment of corn straw (CS) was investigated using a central composite design for the response surface methodology. With a processing capacity of 0.28 kg CS (dry matter, DM)/h, the optimal conditions were as follows: 4.50 kW, 30 min, and 3.50% NaOH (w/v). The glucose and ethanol production from the pretreated CS were 63.22 and 31.29 g/100 g DM, respectively. These values were 4.42 and 3.79 times higher, respectively, than those from untreated CS. Structural changes in the untreated/pretreated CS were identified by analyzing its chemical composition using X-ray diffraction (XRD), scanning electron microscopy (SEM) and fourier transform infrared spectroscopy (FTIR). In addition, the solid residue recovery ratio was demonstrated to be an indicator of the biomass bioconversion potential.     

The optimized CO2-added ammonia explosion pretreatment for bioethanol production from rice straw

A CO₂-added ammonia explosion pretreatment was performed for bioethanol production from rice straw. The pretreatment conditions, such as ammonia concentration, CO₂ loading level, residence time, and temperature were optimized using response surface methodology. The response for optimization was defined as the glucose conversion rate. The optimized pretreatment conditions resulting in maximal glucose yield (93.6 %) were determined as 14.3 % of ammonia concentration, 2.2 MPa of CO₂ loading level, 165.1 °C of temperature, and 69.8 min of residence time. Scanning electron microscopy analysis showed that pretreatment of rice straw strongly increased the surface area and pore size, thus increasing enzymatic accessibility for enzymatic saccharification. Finally, an ethanol yield of 97 % was achieved via simultaneous saccharification and fermentation. Thus, the present study suggests that CO₂-added ammonia pretreatment is an appropriate process for bioethanol production from rice straw.     

Enhanced enzymatic hydrolysis of rapeseed straw by popping pretreatment for bioethanol production

The objective of this study was to find a pretreatment process that enhances enzymatic conversion of biomass to sugars. Rapeseed straw was pretreated by two processes: a wet process involving wet milling plus a popping treatment, and a dry process involving popping plus dry milling. The effects of the pretreatments were studied both in terms of structural and compositional changes and change in susceptibility to enzymatic hydrolysis. After application of the wet and dry processes, the amounts of cellulose and xylose in the straw were 37-38% and 14-15%, respectively, compared to 31% and 12% in untreated counterparts. In enzymatic hydrolysis performance, the wet process presented the best glucose yield, with a 93.1% conversion, while the dry process yielded 69.6%, and the un-pretreated process yielded <20%. Electron microscopic studies of the straw also showed a relative increase in susceptibility to enzymatic hydrolysis with pretreatment.     

Organosolvent pretreatment and enzymatic hydrolysis of rice straw for the production of bioethanol

The present study investigates the operational conditions for organosolvent pretreatment and hydrolysis of rice straw. Among the different organic acids and organic solvents tested, acetone was found to be most effective based on the fermentable sugar yield. Optimization of process parameters for acetone pretreatment were carried out. The structural changes before and after pretreatment were investigated by scanning electron microscopy, X-ray diffraction and Fourier transform infrared (FTIR) analysis. The X-ray diffraction profile showed that the degree of crystallinity was higher for acetone pretreated biomass than that of the native. FTIR spectrum also exhibited significant difference between the native and pretreated samples. Under optimum pretreatment conditions 0.458 g of reducing sugar was produced per gram of pretreated biomass with a fermentation efficiency of 39%. Optimization of process parameters for hydrolysis such as biomass loading, enzyme loading, surfactant concentration and incubation time was done using Box–Benhken design. The results indicate that acetone pretreated rice straw can be used as a good feed stock for bioethanol production.     

Comparison between solid-state and powder-state alkali pretreatment on saccharification and fermentation for bioethanol production from rice straw

The efficacy of different concentrations of NaOH (0.25%, 0.50%, 0.75%, and 1.00%) for the pretreatment of rice straw in solid and powder state in enzymatic saccharification and fermentation for the production of bioethanol was evaluated. A greater amount of biomass was recovered through solid-state pretreatment (3.74 g) from 5 g of rice straw. The highest increase in the volume of rice straw powder as a result of swelling was observed with 1.00% NaOH pretreatment (48.07%), which was statistically identical to 0.75% NaOH pretreatment (32.31%). The surface of rice straw was disrupted by the 0.75% NaOH and 1.00% NaOH pretreated samples as observed using field-emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). In Fourier-transform infrared (FT-IR) spectra, absorbance of hydroxyl groups at 1,050 cm^?1 due to the OH group of lignin was gradually decreased with the increase of NaOH concentration. The greatest amounts of glucose and ethanol were obtained in 1.00% NaOH solid-state pretreated and powder-state hydrolyzed samples (0.804 g g^?1 and 0.379 g g^?1, respectively), which was statistically similar to the use of 0.75% NaOH (0.763 g g^?1 and 0.358 g g^?1, respectively). Thus, solid-state pretreatment with 0.75% NaOH and powder-state hydrolysis appear to be suitable for fermentation and bioethanol production from rice straw.     

Comparison of some new pretreatment methods for second generation bioethanol production from wheat straw and water hyacinth

Pretreatment of lignocellulosic residues like water hyacinth (WH) and wheat straw (WS) using crude glycerol (CG) and ionic liquids (IL) pretreatment was evaluated and compared with conventional dilute acid pretreatment (DAT) in terms of enzymatic hydrolysis yield and fermentation yield of pretreated samples. In the case of WS, 1-butyl-3-methylimidazolium acetate pretreatment was found to be the best method. The hydrolysis yields of glucose and total reducing sugars were 2.1 and 3.3 times respectively higher by IL pretreatment than DAT, while it was 1.4 and 1.9 times respectively higher with CG pretreatment. For WH sample, CG pretreatment was as effective as DAT and more effective than IL pretreatment regarding hydrolysis yield. The fermentation inhibition was not noticeable with both types of pretreatment methods and feedstocks. Besides, CG pretreatment was found as effective as pure glycerol pretreatment for both feedstocks. This opens up an attractive economic route for the utilization of CG.     

Operational strategies for producing bioethanol in a continuous single-stage reactor

Novel strategies to facilitate the transition from batch to continuous simultaneous saccharification and fermentation were studied in this work. Implementing these strategies in bioethanol production plants to change production to a continuous mode will avoid large modifications in the process configuration. Therefore, experiments were carried out in a single-stage reactor applying strategies that favour a priori viability of yeast and stability of the process. The effects of (a) hydraulic residence time (HRT), (b) anaerobic and microaerobic operation, (c) inoculation strategy and (d) growth inhibition due to high ethanol concentrations were evaluated. The highest ethanol concentration (6.3 % w/w) was achieved during anaerobic operation, with reinoculations every 3–4 days and an HRT of 60 h; however, the processes suffered severe instability under these conditions. The greatest productivity and stability of the process was achieved using periodic microaeration and an HRT of 36 h (0.169 % ethanol weight/h), overcoming the result obtained during batch operation (0.128 % ethanol weight/h).     

High efficiency styrene biodegradation in a biphasic organic/water continuous reactor

Styrene was degraded as sole source of carbon and energy by a selected bacterial community in a two-phase aqueous-organic medium (80%:20%, vol/vol). Silicone oil was used to solubilize styrene, which is sparingly soluble in water and to prevent its toxicity toward microorganisms. Preliminary studies with the mixed population in batch cultures indicate that the specific activity and the maximum growth rate at optimal 3H 6.0 were 46 mg·g^–1·h^–1 and 0.15 h^–1, respectively. In pH-regulated chemostat cultures, styrene was degraded at dilution rates ranging from 0.05 to 0.20 h^–1. Kinetic parameters and the proportion of each strain in the mixed culture were followed. At 0.20 h^–1, only one strain as compared to four initially present, remained in the medium. This strain Pseudomonas aeruginosa, degrades styrene with a specific activity of 293 mg·g^–1·h^–1. Such results could lead to industrial treatment of waste gas or water polluted with styrene. Correspondence to: J,-M. Lebeault     

Batch xylitol production from wheat straw hemicellulosic hydrolysate using Candida guilliermondii in a stirred tank reactor

Batch production of xylitol from the hydrolysate of wheat straw hemicellulose using Candida guilliermondii was carried out in a stirred tank reactor (agitation speed of 300 rpm, aeration rate of 0.6 vvm and initial cell concentration of 0.5 g l^–1). After 54 h, xylitol production from 30.5 g xylose l^–1 reached 27.5 g l^–1, resulting in a xylose-to-xylitol bioconversion yield of 0.9 g g^–1 and a productivity of 0.5 g l^–1 h^–1.     

Direct bioethanol production from wheat straw using xylose/glucose co-fermentation by co-culture of two recombinant yeasts

Journal of Industrial Microbiology & Biotechnology - To achieve a cost-effective bioconversion of lignocellulosic materials, a novel xylose/glucose co-fermentation process by co-culture of...     

Bioethanol production from barley hull using SAA (soaking in aqueous ammonia) pretreatment

Barley hull, a lignocellulosic biomass, was pretreated using aqueous ammonia, to be converted into ethanol. Barley hull was soaked in 15 and 30 wt.% aqueous ammonia at 30, 60, and 75 °C for between 12 h and 11 weeks. This pretreatment method has been known as “soaking in aqueous ammonia” (SAA). Among the tested conditions, the best pretreatment conditions observed were 75 °C, 48 h, 15 wt.% aqueous ammonia and 1:12 of solid:liquid ratio resulting in saccharification yields of 83% for glucan and 63% for xylan with 15 FPU/g-glucan enzyme loading. Pretreatment using 15 wt.% ammonia for 24–72 h at 75 °C removed 50–66% of the original lignin from the solids while it retained 65–76% of the xylan without any glucan loss.

Addition of xylanase along with cellulase resulted in synergetic effect on ethanol production in SSCF (simultaneous saccharification and co-fermentation) using SAA-treated barley hull and recombinant E. coli (KO11). With 3% w/v glucan loading and 4 mL of xylanase enzyme loadings, the SSCF of the SAA treated barley hull resulted 24.1 g/L ethanol concentration at 15 FPU cellulase/g-glucan loading, which corresponds to 89.4% of the maximum theoretical yield based on glucan and xylan.

SEM results indicated that SAA treatment increased surface area and the pore size. It is postulated that these physical changes enhance the enzymatic digestibility in the SAA treated barley hull.     

Cell-wall structural changes in wheat straw pretreated for bioethanol production

Background  

Pretreatment is an essential step in the enzymatic hydrolysis of biomass and subsequent production of bioethanol. Recent results indicate that only a mild pretreatment is necessary in an industrial, economically feasible system. The Integrated Biomass Utilisation System hydrothermal pretreatment process has previously been shown to be effective in preparing wheat straw for these processes without the application of additional chemicals. In the current work, the effect of the pretreatment on the straw cell-wall matrix and its components are characterised microscopically (atomic force microscopy and scanning electron microscopy) and spectroscopically (attenuated total reflectance Fourier transform infrared spectroscopy) in order to understand this increase in digestibility.     

DiSC (direct saccharification of culms) process for bioethanol production from rice straw

A simple process (the direct-saccharification-of-culms (DiSC) process) to produce ethanol from rice straw culms, accumulating significant amounts of soft carbohydrates (SCs: glucose, fructose, sucrose, starch and β-1,3-1,4-glucan) was developed. This study focused on fully mature culms of cv. Leafstar, containing 69.2% (w/w of dried culms) hexoses from SCs and cellulose. Commercially-available wind-separation equipment successfully prepared a culm-rich fraction with a SC recovery of 83.1% (w/w) from rice straw flakes (54.1% of total weight of rice straw). The fraction was suspended in water (20%, w/w) for starch liquefaction, and the suspension was subjected to a simultaneous saccharification and fermentation with yeast, yielding 5.6% (w/v) ethanol (86% of the theoretical yield from whole hexoses in the fraction) after 24 h fermentation. Thus, the DiSC process produced highly-concentrated ethanol from rice straw in a one vat process without any harsh thermo-chemical pretreatments.     

Ethanol production from rice straw using optimized aqueous-ammonia soaking pretreatment and simultaneous saccharification and fermentation processes

Rice straw was pretreated using aqueous-ammonia solution at moderate temperatures to enable production of the maximum amount of fermentable sugars from enzymatic hydrolysis. The effects of various operating variables including pretreatment temperature, pretreatment time, the concentration of ammonia and the solid-to-liquid ratio on the degree of lignin removal and the enzymatic digestibility were optimized using response surface methodology. The optimal reaction conditions, which resulted in an enzymatic digestibility of 71.1%, were found to be 69 °C, 10 h and an ammonia concentration of 21% (w/w). The effects of different commercial cellulases and the additional effect of a non-cellulolytic enzyme, xylanase, were also evaluated. Additionally, simultaneous saccharification and fermentation was conducted with rice straw to assess the ethanol production yield and productivity.     

Dilute acid pretreatment of barley straw and its saccharification and fermentation

In this study, the optimization of the major factors for efficient dilute acid pretreatment (DAP) of Korean barley straw was conducted by response surface method (RSM). In addition, saccharification of the optimized pretreated barley straw as well as fermentation of solubilized hemicellulose and enzymatic hydrolysates was performed for bioethanol production. The factors optimized by RSM were concentration of sulfuric acid, reaction time and temperature. Optimization experiments were carried out within the scope of 0.16 ∼ 1.84% sulfuric acid, 10 ∼ 20 min of reaction time, and 116 ∼ 183°C of temperature using a statistical program, and optimal conditions (1.16% of sulfuric acid, 16.9 min of reaction time, and 150°C) were determined based on reliable statistical indicators. The predicted value at stationary point and the experimental value were 81.38 and 80.66%, respectively. Saccharification was performed at 50°C using Celluclast (cellulase) and Novozyme 188 (β-glucosidase) as biocatalysts in an enzyme loading test. Conversion of the saccharification process was approximately 65%. In addition, fermentation of glucose after saccharification and solubilization of xylose solution by DAP were performed using Saccharomyces cerevisiae and Pichia stipitis at 30°C and 200 rpm for 12 h.     

Effect of reactor configuration on biogas production from wheat straw hydrolysate

The potential of wheat straw hydrolysate for biogas production was investigated in continuous stirred tank reactor (CSTR) and up-flow anaerobic sludge bed (UASB) reactors. The hydrolysate originated as a side stream from a pilot plant pretreating wheat straw hydrothermally (195 °C for 10–12 min) for producing 2nd generation bioethanol [Kaparaju, P., Serrano, M., Thomsen, A.B., Kongjan, P., Angelidaki, I., 2009. Bioethanol, biohydrogen and biogas production from wheat straw in a biorefinery concept. Bioresource Technology 100 (9), 2562–2568]. Results from batch assays showed that hydrolysate had a methane potential of 384 ml/g-volatile solids (VS)_added. Process performance in CTSR and UASB reactors was investigated by varying hydrolysate concentration and/or organic loading rate (OLR). In CSTR, methane yields increased with increase in hydrolysate concentration and maximum yield of 297 ml/g-COD was obtained at an OLR of 1.9 g-COD/l d and 100% (v/v) hydrolysate. On the other hand, process performance and methane yields in UASB were affected by OLR and/or substrate concentration. Maximum methane yields of 267 ml/g-COD (COD removal of 72%) was obtained in UASB reactor when operated at an OLR of 2.8 g-COD/l d but with only 10% (v/v) hydrolysate. However, co-digestion of hydrolysate with pig manure (1:3 v/v ratio) improved the process performance and resulted in methane yield of 219 ml/g-COD (COD removal of 72%). Thus, anaerobic digestion of hydrolysate for biogas production was feasible in both CSTR and UASB reactor types. However, biogas process was affected by the reactor type and operating conditions.     

Feasibility of filamentous fungi for biofuel production using hydrolysate from dilute sulfuric acid pretreatment of wheat straw

ABSTRACT: BACKGROUND: Lipids produced from filamentous fungi show great promise for biofuel production, but a major limiting factor is the high production cost attributed to feedstock. Lignocellulosic biomass is a suitable feedstock for biofuel production due to its abundance and low value. However, very limited study has been performed on lipid production by culturing oleaginous fungi with lignocellulosic materials. Thus, identification of filamentous fungal strains capable of utilizing lignocellulosic hydrolysates for lipid accumulation is critical to improve the process and reduce the production cost. RESULTS: The growth performances of eleven filamentous fungi were investigated when cultured on glucose and xylose. Their dry cell weights, lipid contents and fatty acid profiles were determined. Six fungal strains with high lipid contents were selected to culture with the hydrolysate from dilute sulfuric acid pretreatment of wheat straw. The results showed that all the selected fungal strains were able to grow on both detoxified liquid hydrolysate (DLH) and non-detoxified liquid hydrolysate (NDLH). The highest lipid content of 39.4% was obtained by Mortierella isabellina on NDLH. In addition, NDLH with some precipitate could help M. isabellina form pellets with an average diameter of 0.11 mm. CONCLUSION: This study demonstrated the possibility of fungal lipid production from lignocellulosic biomass. M. isabellina was the best lipid producer grown on lignocellulosic hydrolysates among the tested filamentous fungi, because it could not only accumulate oils with a high content by directly utilizing NDLH to simplify the fermentation process, but also form proper pellets to benefit the downstream harvesting. Considering the yield and cost, fungal lipids from lignocellulosic biomass are promising alternative sources for biodiesel production.     

Oil production by oleaginous yeasts using the hydrolysate from pretreatment of wheat straw with dilute sulfuric acid

This paper explores the use of the hydrolysate from the dilute sulfuric acid pretreatment of wheat straw for microbial oil production. The resulting hydrolysate was composed of pentoses (24.3 g/L) and hexoses (4.9 g/L), along with some other degradation products, such as acetic acid, furfural, and hydroxymethylfurfural (HMF). Five oleaginous yeast strains, Cryptococcus curvatus, Rhodotorula glutinis, Rhodosporidium toruloides, Lipomyces starkeyi, and Yarrowia lipolytica, were evaluated by using this hydrolysate as substrates. The results showed that all of these strains could use the detoxified hydrolysate to produce lipids while except R. toruloides non-detoxified hydrolysate could also be used for the growth of all of the selective yeast strains. C. curvatus showed the highest lipid concentrations in medium on both the detoxified (4.2 g/L) and non-detoxified (5.8 g/L) hydrolysates. And the inhibitory effect studies on C. curvatus indicated HMF had insignificant impacts at a concentration of up to 3 g/L while furfural inhibited cell growth and lipid content by 72.0% and 62.0% at 1 g/L, respectively. Our work demonstrates that lipid production is a promising alternative to utilize hemicellulosic sugars obtained during pretreatment of lignocellulosic materials.