Effects of Aeration on the Synthesis of Poly(3-Hydroxybutyrate) from Glycerol and Glucose in Recombinant Escherichia coli

Bioreactor cultures of Escherichia coli recombinants carrying phaBAC and phaP of Azotobacter sp. FA8 grown on glycerol under low-agitation conditions accumulated more poly(3-hydroxybutyrate) (PHB) and ethanol than at high agitation, while in glucose cultures, low agitation led to a decrease in PHB formation. Cells produced smaller amounts of acids from glycerol than from glucose. Glycerol batch cultures stirred at 125 rpm accumulated, in 24 h, 30.1% (wt/wt) PHB with a relative molecular mass of 1.9 MDa, close to that of PHB obtained using glucose.Polyhydroxyalkanoates (PHAs), accumulated as intracellular granules by many bacteria under unfavorable conditions (5, 8), are carbon and energy reserves and also act as electron sinks, enhancing the fitness of bacteria and contributing to redox balance (9, 11, 19). PHAs have thermoplastic properties, are totally biodegradable by microorganisms present in most environments, and can be produced from different renewable carbon sources (8).Poly(3-hydroxybutyrate) (PHB) is the best known PHA, and its accumulation in recombinant Escherichia coli from several carbon sources has been studied (1, 13). In the last few years, increasing production of biodiesel has caused a sharp fall in the cost of its main by-product, glycerol (22). Its use for microbial PHA synthesis has been analyzed for natural PHA producers, such as Methylobacterium rhodesianum, Cupriavidus necator (formerly called Ralstonia eutropha) (3), several Pseudomonas strains (22), the recently described bacterium Zobellella denitrificans (7), and a Bacillus sp. (18), among others. Glycerol has also been used for PHB synthesis in recombinant E. coli (12, 15). PHAs obtained from glycerol were reported to have a significantly lower molecular weight than polymer synthesized from other substrates, such as glucose or lactose (10, 23).Apart from the genes that catalyze polymer biosynthesis, natural PHA producers have several genes that are involved in granule formation and/or have regulatory functions, such as phasins, granule-associated proteins that have been shown to enhance polymer synthesis and the number and size of PHA granules (17, 24). The phasin PhaP has been shown to exert a beneficial effect on bacterial growth and PHB accumulation from glycerol in bioreactor cultures of strain K24KP, a recombinant E. coli that carries phaBAC and phaP of Azotobacter sp. FA8 (6).Because the redox state of the cells is known to affect the synthesis of PHB (1, 4, 14), the present study investigates the behavior of this recombinant strain under different aeration conditions, by using two substrates, glucose and glycerol, with different oxidation states.     

Fermentation of Glycerol to Succinate by Metabolically Engineered Strains of Escherichia coli

The fermentative metabolism of Escherichia coli was reengineered to efficiently convert glycerol to succinate under anaerobic conditions without the use of foreign genes. Formate and ethanol were the dominant fermentation products from glycerol in wild-type Escherichia coli ATCC 8739, followed by succinate and acetate. Inactivation of pyruvate formate-lyase (pflB) in the wild-type strain eliminated the production of formate and ethanol and reduced the production of acetate. However, this deletion slowed growth and decreased cell yields due to either insufficient energy production or insufficient levels of electron acceptors. Reversing the direction of the gluconeogenic phosphoenolpyruvate carboxykinase reaction offered an approach to solve both problems, conserving energy as an additional ATP and increasing the pool of electron acceptors (fumarate and malate). Recruiting this enzyme through a promoter mutation (pck*) to increase expression also increased the rate of growth, cell yield, and succinate production. Presumably, the high NADH/NAD⁺ ratio served to establish the direction of carbon flow. Additional mutations were also beneficial. Glycerol dehydrogenase and the phosphotransferase-dependent dihydroxyacetone kinase are regarded as the primary route for glycerol metabolism under anaerobic conditions. However, this is not true for succinate production by engineered strains. Deletion of the ptsI gene or any other gene essential for the phosphotranferase system was found to increase succinate yield. Deletion of pflB in this background provided a further increase in the succinate yield. Together, these three core mutations (pck*, ptsI, and pflB) effectively redirected carbon flow from glycerol to succinate at 80% of the maximum theoretical yield during anaerobic fermentation in mineral salts medium.Renewable bioenergy offers the potential to solve many environmental problems associated with petroleum-based fuels and chemicals. Biodiesel is produced by reacting vegetable oil or animal fat with alcohol (methanol or ethanol) and used as a transportation fuel in many countries (33). Glycerol is formed as an abundant waste product with limited commercial uses. As the worldwide production of biodiesel continues to increase, the development of effective uses for glycerol may prove essential for the economics and competitiveness of the biodiesel industry. The value of glycerol waste from biodiesel is similar to that of sugars currently used to produce fuel ethanol. Bioconversion of glycerol to higher-value products that replace petroleum, such as polymers, surfactants, solvents, and chemical intermediates, represents an opportunity to decrease waste and improve the economics of the biodiesel industry (5).Many previous investigations have focused on the fermentative production of 1,3-propanediol (1,3-PD) from glycerol (2, 26, 35). Microorganisms including Klebsiella (14), Citrobacter (6), Enterobacter (1), Lactobacillus (29), and Clostridium (10, 28) have the native ability to ferment glycerol into this product. Dupont and Genencor have commercialized a 1,3-PD-based polyester, a condensation product of 1,3-PD and terephthalic acid using glucose as the feedstock. Potential demand for this polymer is estimated to be 1 billion to 2 billion pounds per year over the next 10 years (26). Other investigations of glycerol fermentation have described the production of hydrogen and ethanol (15), polyhydroxyalkanoates (PHAs) (20, 27), glyceric acid (13), and small amounts of succinate (21).Succinic acid is currently used as a specialty chemical in the agricultural, food, and pharmaceutical industries (24, 34). It has also been identified by the U.S. Department of Energy as one of the top 12 building block chemicals (31) because it can be converted into a wide variety of products, including green solvents, pharmaceutical products, and biodegradable plastics (24, 34). Succinate is primarily produced from petroleum-derived maleic anhydride. Recent increases in the petroleum price have generated considerable interest in the fermentative production of succinate from sugars using either natural succinate-producing rumen bacteria or metabolically engineered Escherichia coli strains (24, 36, 38). Succinate can also be produced from glycerol by rumen bacteria, such as Anaerobiospirillum succiniciproducens (21). However, these strains require complex nutrients that increase costs of production, purification, and waste treatment.E. coli has been previously engineered for the commercial production of 1,3-PD from sugars by Dupont and Genecor (26). It is an excellent organism for biotechnology applications but was long thought incapable of anaerobic growth on glycerol (23). Recent studies demonstrated that E. coli can ferment glycerol anaerobically (8, 11, 25, 33), and a new model was proposed for glycerol fermentation (11). In this model, glycerol is metabolized through the glycerol dehydrogenase (encoded by gldA) and dihydroxyacetone kinase (encoded by dhaKLM) pathway with the production of ethanol and acetate as primary fermentation products (11). Small amounts of succinate and 1,2-propanediol were also produced. Native genes encoding glycerol dehydrogenase and dihydroxyacetone kinase were expressed from a plasmid to increase the rates of glycerol metabolism and ethanol production (32). Succinate production has also been increased by expressing Clostridium freundii dihydroxyacetone kinase (encoded by dhaKL) (11). However, neither of these enhanced pathways would appear suitable for efficient succinate production due to the absence of net ATP production and the requirement for phosphoenolpyruvate as a phosphoryl donor for dihydroxyacetone, limiting the carboxylation of this intermediate (Fig. ​(Fig.11).Open in a separate windowFIG. 1.Glycerol uptake and fermentation by E. coli. (A) Native E. coli pathways. Bold black arrows represent dominant fermentation reactions prior to engineering; thin black arrows represent minor fermentation reactions. GlpK and GlpD are thought to function primarily during aerobic metabolism. Pathways are based on current reviews in EcoSal (3, 4, 22), data available in Ecocyc (19), and primary literature (11, 12, 18, 25, 30). (B) Engineered pathway for the fermentative metabolism of glycerol to succinate. Bold black arrows represent the engineered reactions for glycerol fermentation to succinate as the dominant product; thin black arrows represent minor fermentation reactions in the engineered strain. Dashed arrows represent reactions that are not functional due to deletions in ptsI and pflB. Deleted genes are marked with a black X. In native E. coli strains, phosphoenolpyruvate carboxykinase functions during gluconeogenesis to produce phosphoenolpyruvate. Mutational activation of the pck gene (denoted pck*) allows this enzyme to function in the reverse direction and to serve as the dominant carboxylation step, conserving energy as ATP. With this engineered pathway, competing needs for PEP have been eliminated and net ATP production has been increased. PEP is boxed to indicate a common pool. Abbreviations: DHA, dihydroxyacetone; DHAP, dihydroxyacetone 3-phosphate; PEP, phosphoenolpyruvate; G3P, glycerol 3-phosphate; GA3P, glyceraldehydes 3-phosphate.Previous studies in our laboratory (16, 17, 36, 38) have engineered E. coli ATCC 8739 for the efficient production of succinate from glucose by recruiting genes from alternative pathways (36, 38). In this paper, we report the use of a similar approach to engineer strains for succinate production from glycerol in mineral salts medium.     

A New Borrelia Species Defined by Multilocus Sequence Analysis of Housekeeping Genes

Analysis of Lyme borreliosis (LB) spirochetes, using a novel multilocus sequence analysis scheme, revealed that OspA serotype 4 strains (a rodent-associated ecotype) of Borrelia garinii were sufficiently genetically distinct from bird-associated B. garinii strains to deserve species status. We suggest that OspA serotype 4 strains be raised to species status and named Borrelia bavariensis sp. nov. The rooted phylogenetic trees provide novel insights into the evolutionary history of LB spirochetes.Multilocus sequence typing (MLST) and multilocus sequence analysis (MLSA) have been shown to be powerful and pragmatic molecular methods for typing large numbers of microbial strains for population genetics studies, delineation of species, and assignment of strains to defined bacterial species (4, 13, 27, 40, 44). To date, MLST/MLSA schemes have been applied only to a few vector-borne microbial populations (1, 6, 30, 37, 40, 41, 47).Lyme borreliosis (LB) spirochetes comprise a diverse group of zoonotic bacteria which are transmitted among vertebrate hosts by ixodid (hard) ticks. The most common agents of human LB are Borrelia burgdorferi (sensu stricto), Borrelia afzelii, Borrelia garinii, Borrelia lusitaniae, and Borrelia spielmanii (7, 8, 12, 35). To date, 15 species have been named within the group of LB spirochetes (6, 31, 32, 37, 38, 41). While several of these LB species have been delineated using whole DNA-DNA hybridization (3, 20, 33), most ecological or epidemiological studies have been using single loci (5, 9-11, 29, 34, 36, 38, 42, 51, 53). Although some of these loci have been convenient for species assignment of strains or to address particular epidemiological questions, they may be unsuitable to resolve evolutionary relationships among LB species, because it is not possible to define any outgroup. For example, both the 5S-23S intergenic spacer (5S-23S IGS) and the gene encoding the outer surface protein A (ospA) are present only in LB spirochete genomes (36, 43). The advantage of using appropriate housekeeping genes of LB group spirochetes is that phylogenetic trees can be rooted with sequences of relapsing fever spirochetes. This renders the data amenable to detailed evolutionary studies of LB spirochetes.LB group spirochetes differ remarkably in their patterns and levels of host association, which are likely to affect their population structures (22, 24, 46, 48). Of the three main Eurasian Borrelia species, B. afzelii is adapted to rodents, whereas B. valaisiana and most strains of B. garinii are maintained by birds (12, 15, 16, 23, 26, 45). However, B. garinii OspA serotype 4 strains in Europe have been shown to be transmitted by rodents (17, 18) and, therefore, constitute a distinct ecotype within B. garinii. These strains have also been associated with high pathogenicity in humans, and their finer-scale geographical distribution seems highly focal (10, 34, 52, 53).In this study, we analyzed the intra- and interspecific phylogenetic relationships of B. burgdorferi, B. afzelii, B. garinii, B. valaisiana, B. lusitaniae, B. bissettii, and B. spielmanii by means of a novel MLSA scheme based on chromosomal housekeeping genes (30, 48).     

Alignment of the c-Type Cytochrome OmcS along Pili of Geobacter sulfurreducens

Immunogold localization revealed that OmcS, a cytochrome that is required for Fe(III) oxide reduction by Geobacter sulfurreducens, was localized along the pili. The apparent spacing between OmcS molecules suggests that OmcS facilitates electron transfer from pili to Fe(III) oxides rather than promoting electron conduction along the length of the pili.There are multiple competing/complementary models for extracellular electron transfer in Fe(III)- and electrode-reducing microorganisms (8, 18, 20, 44). Which mechanisms prevail in different microorganisms or environmental conditions may greatly influence which microorganisms compete most successfully in sedimentary environments or on the surfaces of electrodes and can impact practical decisions on the best strategies to promote Fe(III) reduction for bioremediation applications (18, 19) or to enhance the power output of microbial fuel cells (18, 21).The three most commonly considered mechanisms for electron transfer to extracellular electron acceptors are (i) direct contact between redox-active proteins on the outer surfaces of the cells and the electron acceptor, (ii) electron transfer via soluble electron shuttling molecules, and (iii) the conduction of electrons along pili or other filamentous structures. Evidence for the first mechanism includes the necessity for direct cell-Fe(III) oxide contact in Geobacter species (34) and the finding that intensively studied Fe(III)- and electrode-reducing microorganisms, such as Geobacter sulfurreducens and Shewanella oneidensis MR-1, display redox-active proteins on their outer cell surfaces that could have access to extracellular electron acceptors (1, 2, 12, 15, 27, 28, 31-33). Deletion of the genes for these proteins often inhibits Fe(III) reduction (1, 4, 7, 15, 17, 28, 40) and electron transfer to electrodes (5, 7, 11, 33). In some instances, these proteins have been purified and shown to have the capacity to reduce Fe(III) and other potential electron acceptors in vitro (10, 13, 29, 38, 42, 43, 48, 49).Evidence for the second mechanism includes the ability of some microorganisms to reduce Fe(III) that they cannot directly contact, which can be associated with the accumulation of soluble substances that can promote electron shuttling (17, 22, 26, 35, 36, 47). In microbial fuel cell studies, an abundance of planktonic cells and/or the loss of current-producing capacity when the medium is replaced is consistent with the presence of an electron shuttle (3, 14, 26). Furthermore, a soluble electron shuttle is the most likely explanation for the electrochemical signatures of some microorganisms growing on an electrode surface (26, 46).Evidence for the third mechanism is more circumstantial (19). Filaments that have conductive properties have been identified in Shewanella (7) and Geobacter (41) species. To date, conductance has been measured only across the diameter of the filaments, not along the length. The evidence that the conductive filaments were involved in extracellular electron transfer in Shewanella was the finding that deletion of the genes for the c-type cytochromes OmcA and MtrC, which are necessary for extracellular electron transfer, resulted in nonconductive filaments, suggesting that the cytochromes were associated with the filaments (7). However, subsequent studies specifically designed to localize these cytochromes revealed that, although the cytochromes were extracellular, they were attached to the cells or in the exopolymeric matrix and not aligned along the pili (24, 25, 30, 40, 43). Subsequent reviews of electron transfer to Fe(III) in Shewanella oneidensis (44, 45) appear to have dropped the nanowire concept and focused on the first and second mechanisms.Geobacter sulfurreducens has a number of c-type cytochromes (15, 28) and multicopper proteins (12, 27) that have been demonstrated or proposed to be on the outer cell surface and are essential for extracellular electron transfer. Immunolocalization and proteolysis studies demonstrated that the cytochrome OmcB, which is essential for optimal Fe(III) reduction (15) and highly expressed during growth on electrodes (33), is embedded in the outer membrane (39), whereas the multicopper protein OmpB, which is also required for Fe(III) oxide reduction (27), is exposed on the outer cell surface (39).OmcS is one of the most abundant cytochromes that can readily be sheared from the outer surfaces of G. sulfurreducens cells (28). It is essential for the reduction of Fe(III) oxide (28) and for electron transfer to electrodes under some conditions (11). Therefore, the localization of this important protein was further investigated.     

Population Structure of the Lyme Borreliosis Spirochete Borrelia burgdorferi in the Western Black-Legged Tick (Ixodes pacificus) in Northern California

Factors potentially contributing to the lower incidence of Lyme borreliosis (LB) in the far-western than in the northeastern United States include tick host-seeking behavior resulting in fewer human tick encounters, lower densities of Borrelia burgdorferi-infected vector ticks in peridomestic environments, and genetic variation among B. burgdorferi spirochetes to which humans are exposed. We determined the population structure of B. burgdorferi in over 200 infected nymphs of the primary bridging vector to humans, Ixodes pacificus, collected in Mendocino County, CA. This was accomplished by sequence typing the spirochete lipoprotein ospC and the 16S-23S rRNA intergenic spacer (IGS). Thirteen ospC alleles belonging to 12 genotypes were found in California, and the two most abundant, ospC genotypes H3 and E3, have not been detected in ticks in the Northeast. The most prevalent ospC and IGS biallelic profile in the population, found in about 22% of ticks, was a new B. burgdorferi strain defined by ospC genotype H3. Eight of the most common ospC genotypes in the northeastern United States, including genotypes I and K that are associated with disseminated human infections, were absent in Mendocino County nymphs. ospC H3 was associated with hardwood-dominated habitats where western gray squirrels, the reservoir host, are commonly infected with LB spirochetes. The differences in B. burgdorferi population structure in California ticks compared to the Northeast emphasize the need for a greater understanding of the genetic diversity of spirochetes infecting California LB patients.In the United States, Lyme borreliosis (LB) is the most commonly reported vector-borne illness and is caused by infection with the spirochete Borrelia burgdorferi (3, 9, 52). The signs and symptoms of LB can include a rash, erythema migrans, fever, fatigue, arthritis, carditis, and neurological manifestations (50, 51). The black-legged tick, Ixodes scapularis, and the western black-legged tick, Ixodes pacificus, are the primary vectors of B. burgdorferi to humans in the United States, with the former in the northeastern and north-central parts of the country and the latter in the Far West (9, 10). These ticks perpetuate enzootic transmission cycles together with a vertebrate reservoir host such as the white-footed mouse, Peromyscus leucopus, in the Northeast and Midwest (24, 35), or the western gray squirrel, Sciurus griseus, in California (31, 46).B. burgdorferi is a spirochete species with a largely clonal population structure (14, 16) comprising several different strains or lineages (8). The polymorphic ospC gene of B. burgdorferi encodes a surface lipoprotein that increases expression within the tick during blood feeding (47) and is required for initial infection of mammalian hosts (25, 55). To date, approximately 20 North American ospC genotypes have been described (40, 45, 49, 56). At least four, and possibly up to nine, of these genotypes are associated with B. burgdorferi invasiveness in humans (1, 15, 17, 49, 57). Restriction fragment length polymorphism (RFLP) and, subsequently, sequence analysis of the 16S-23S rRNA intergenic spacer (IGS) are used as molecular typing tools to investigate genotypic variation in B. burgdorferi (2, 36, 38, 44, 44, 57). The locus maintains a high level of variation between related species, and this variation reflects the heterogeneity found at the genomic level of the organism (37). The IGS and ospC loci appear to be linked (2, 8, 26, 45, 57), but the studies to date have not been representative of the full range of diversity of B. burgdorferi in North America.Previous studies in the northeastern and midwestern United States have utilized IGS and ospC genotyping to elucidate B. burgdorferi evolution, host strain specificity, vector-reservoir associations, and disease risk to humans. In California, only six ospC and five IGS genotypes have been described heretofore in samples from LB patients or I. pacificus ticks (40, 49, 56) compared to approximately 20 ospC and IGS genotypes identified in ticks, vertebrate hosts, or humans from the Northeast and Midwest (8, 40, 45, 49, 56). Here, we employ sequence analysis of both the ospC gene and IGS region to describe the population structure of B. burgdorferi in more than 200 infected I. pacificus nymphs from Mendocino County, CA, where the incidence of LB is among the highest in the state (11). Further, we compare the Mendocino County spirochete population to populations found in the Northeast.     

Conserved and Variable Features of Gag Structure and Arrangement in Immature Retrovirus Particles

The assembly of retroviruses is driven by oligomerization of the Gag polyprotein. We have used cryo-electron tomography together with subtomogram averaging to describe the three-dimensional structure of in vitro-assembled Gag particles from human immunodeficiency virus, Mason-Pfizer monkey virus, and Rous sarcoma virus. These represent three different retroviral genera: the lentiviruses, betaretroviruses and alpharetroviruses. Comparison of the three structures reveals the features of the supramolecular organization of Gag that are conserved between genera and therefore reflect general principles of Gag-Gag interactions and the features that are specific to certain genera. All three Gag proteins assemble to form approximately spherical hexameric lattices with irregular defects. In all three genera, the N-terminal domain of CA is arranged in hexameric rings around large holes. Where the rings meet, 2-fold densities, assigned to the C-terminal domain of CA, extend between adjacent rings, and link together at the 6-fold symmetry axis with a density, which extends toward the center of the particle into the nucleic acid layer. Although this general arrangement is conserved, differences can be seen throughout the CA and spacer peptide regions. These differences can be related to sequence differences among the genera. We conclude that the arrangement of the structural domains of CA is well conserved across genera, whereas the relationship between CA, the spacer peptide region, and the nucleic acid is more specific to each genus.Retrovirus assembly is driven by the oligomerization of Gag, a multidomain protein, including an N-terminal membrane binding domain (MA), a two-domain structural component (CA), and an RNA binding domain (NC). The Gag proteins of all orthoretroviruses, including the alpha-, beta-, and lentiretroviruses discussed here, share this conserved modular architecture (Fig. ​(Fig.1).1). Despite very weak sequence conservation, the tertiary structures of MA, CA, and NC are conserved among retroviruses. Outside these conserved domains the Gag proteins of different retroviruses exhibit substantial variability. Other domains may be present or absent, and the length and sequence of linker peptides may also vary (12) (Fig. ​(Fig.11).Open in a separate windowFIG. 1.Modular architecture of the full-length Gag proteins of HIV, M-PMV, and RSV. White rectangles illustrate Gag polyprotein cleavage products. The extent of the constructs used in the electron microscopic analysis is specified under each protein as a black rectangle. Gray triangles specify cleavage sites. Residue numbers are counted from the beginning of Gag.Oligomerization of Gag in an infected cell leads to the formation of roughly spherical immature virus particles, where Gag is arranged in a radial fashion with the N-terminal MA domain associated with a surrounding lipid bilayer, and the more C-terminal NC pointing toward the center of the particle (15, 44, 46). Subsequent multiple cleavages of Gag by the viral protease lead to a rearrangement of the virus. NC and the RNA condense in the center of the particle, CA assembles into a capsid or shell around the nucleoprotein, and MA remains associated with the viral membrane. This proteolytic maturation is required to generate an infectious virion (2). In contrast to the mature CA lattice, which has been extensively studied (11, 16, 36), the Gag lattice in immature particles is incompletely understood.Gag itself contains all of the necessary determinants for particle assembly. For example, the expression of Gag alone in an insect cell expression system is sufficient to generate viruslike particles (3, 17, 22, 38). Retroviral Gag proteins also can be assembled in vitro in the presence of nucleic acids to form spherical particles (9, 19, 39, 43, 47). The arrangement of Gag within these in vitro-assembled Gag particles is indistinguishable from that found in immature virus particles (6), and the in vitro assembly systems have proved valuable for unraveling the principles of virus assembly (18, 28, 29, 39). Multiple layers of interaction promote the assembly of Gag in vivo, including MA-membrane-MA interactions, CA-CA interactions, and NC-RNA-NC interactions. An extensive body of literature has explored which regions of Gag are required for assembly and which can be replaced or deleted without compromising assembly. MA-membrane-MA interactions contribute but are not essential. NC-RNA-NC interactions appear to function to nonspecifically link Gag molecules together and can be replaced both in vivo and in vitro by other interaction domains such as leucine zippers (4, 13, 20, 32, 48). The C-terminal domain of CA (referred to here as C-CA) and the stretch of amino acids immediately following this domain (termed the spacer peptide [SP] region) are critical for assembly and sensitive to mutation (1, 22, 27, 30).We set out to understand how the substantial sequence variation among Gag proteins in different retroviruses is manifested in structural differences in the immature Gag lattice. To do this, we studied three retroviruses from different genera: the lentivirus human immunodeficiency virus type 1 (HIV-1), the betaretrovirus Mason-Pfizer monkey virus (M-PMV), and the alpharetrovirus Rous sarcoma virus (RSV). These retroviruses are those for which in vitro assembly was first established and has been most extensively studied (6, 19, 24, 28, 29, 35, 43, 47).The domain structures of the three retroviruses differ most substantially upstream of CA. Both M-PMV and RSV have domains located between MA and CA that are absent in HIV (Fig. ​(Fig.1).1). In M-PMV there are 198 residues forming the pp24 and p12 domains; in RSV there are 84 residues forming the p2a, p2b, and p10 domains. The three retroviruses have different requirements for regions upstream of CA during assembly. The C-terminal 25 residues of p10 are essential for proper immature RSV assembly, both in vitro and in vivo, and these residues are inferred to interact directly with N-CA to stabilize the hexamer by forming contacts between adjacent N-CA domains (35). An equivalent assembly domain has not been described for other retroviruses. Within M-PMV p12 is the so-called internal scaffolding domain that is not essential for assembly in vitro (43) but is required for particle assembly when the precursor is expressed under the control of the M-PMV promoter (41). It is a key domain for the membrane-independent assembly of immature capsids (40).In HIV, five residues upstream of CA must be present for assembly of immature virus-like spherical particles in vitro, although larger upstream extensions, including part of MA, are required for efficient assembly of regular particles, both for HIV and RSV. For HIV, if the entire MA domain is included, in vitro assembly requires the presence of inositol penta- or hexakis phosphate (8). If no sequences upstream of CA are present, the in vitro particles in both of these viruses adopt a mature-type tubular morphology (10, 18). It has been hypothesized that cleavage at the N terminus of N-CA during maturation leads to the N-terminal residues of CA folding back into the N-CA structure to form a β-hairpin. The β-hairpin is important for assembly of the mature CA lattice, whereas its absence is important for immature assembly (23, 42). These requirements explain why, in HIV and RSV, immature Gag lattice-like structures are formed only if regions upstream of CA are present (18). In M-PMV, an immature Gag lattice can be produced when the regions upstream of CA are deleted if this is combined with mutations (such as deleting the initial proline of CA), which prevent β-hairpin formation (43).During maturation, HIV and RSV Gag proteins are cleaved twice between CA and NC to release a small peptide called SP1 or SP. In RSV the most N-terminal of these two cleavages can occur at one of two possible positions such that the released peptide is either 9 or 12 amino acids long (33). In M-PMV only one cleavage occurs between CA and NC, and no short peptide is produced. The region between the final helix of CA and the Zn fingers has been proposed to adopt a helical bundle architecture in HIV and RSV based on bioinformatic prediction, on mutational analysis, and on structural studies (1, 22, 27, 45). In all three viruses, C-CA and the residues immediately downstream are critical for assembly and are sensitive to mutation. C-CA contains the major homology region, a group of residues that are highly conserved across the retroviruses.Cryo-electron tomography (cET) studies of immature virus particles (6, 45) have resolved the electron density of the HIV Gag lattice in three dimensions at low resolution. Using these methods, we have also described the three-dimensional architecture of in vitro-assembled HIV Gag particles (6). In immature viruses and in vitro-assembled particles, Gag is seen to adopt an 8 nm hexameric lattice, as was predicted from previous Fourier analysis of two-dimensional images (7, 46). The hexameric lattice is interrupted by irregularly shaped holes and cracks in the lattice (6, 45). A similar observation has been made using AFM of in vitro-assembled particles of M-PMV Gag (26). These holes and cracks allow an otherwise planar hexameric lattice to form the surface of an approximately spherical particle.The radial positions of the MA, CA, and NC domains had been assigned previously from cryo-electron micrographs (44, 46). Based on these assignments and the shape of the density, the position and relative orientations of CA domains can be modeled into the low-resolution structure of the HIV lattice (6, 45). Density ascribed to the N-terminal domain of CA (N-CA) forms rings around large holes at the 6-fold symmetry positions in the lattice. Below this layer, at the expected radius of the C-CA, are 2-fold densities, interpreted as corresponding to dimers of C-CA. These densities are linked by rodlike densities, which descend into the NC-nucleic acid layer.HIV is the only retrovirus for which the arrangement of Gag in the immature particle has been described in three dimensions. Prior to this work, important open questions were therefore: which features of the arrangement of Gag are conserved between genera and therefore reflect general principles of Gag-Gag interactions, and which features are specific to certain genera? We have applied subtomogram averaging of cryo-electron tomograms to generate reconstructions of in vitro-assembled Gag particles from HIV, M-PMV, and RSV. These allow identification of the general and variable features of the arrangement of Gag and the architecture of immature retroviruses.     

Cultivation of Fastidious Bacteria by Viability Staining and Micromanipulation in a Soil Substrate Membrane System

Soil substrate membrane systems allow for microcultivation of fastidious soil bacteria as mixed microbial communities. We isolated established microcolonies from these membranes by using fluorescence viability staining and micromanipulation. This approach facilitated the recovery of diverse, novel isolates, including the recalcitrant bacterium Leifsonia xyli, a plant pathogen that has never been isolated outside the host.The majority of bacterial species have never been recovered in the laboratory (1, 14, 19, 24). In the last decade, novel cultivation approaches have successfully been used to recover “unculturables” from a diverse range of divisions (23, 25, 29). Most strategies have targeted marine environments (4, 23, 25, 32), but soil offers the potential for the investigation of vast numbers of undescribed species (20, 29). Rapid advances have been made toward culturing soil bacteria by reformulating and diluting traditional media, extending incubation times, and using alternative gelling agents (8, 21, 29).The soil substrate membrane system (SSMS) is a diffusion chamber approach that uses extracts from the soil of interest as the growth substrate, thereby mimicking the environment under investigation (12). The SSMS enriches for slow-growing oligophiles, a proportion of which are subsequently capable of growing on complex media (23, 25, 27, 30, 32). However, the SSMS results in mixed microbial communities, with the consequent difficulty in isolation of individual microcolonies for further characterization (10).Micromanipulation has been widely used for the isolation of specific cell morphotypes for downstream applications in molecular diagnostics or proteomics (5, 15). This simple technology offers the opportunity to select established microcolonies of a specific morphotype from the SSMS when combined with fluorescence visualization (3, 11). Here, we have combined the SSMS, fluorescence viability staining, and advanced micromanipulation for targeted isolation of viable, microcolony-forming soil bacteria.     

Roles of Minor Pilin Subunits Spy0125 and Spy0130 in the Serotype M1 Streptococcus pyogenes Strain SF370

Adhesive pili on the surface of the serotype M1 Streptococcus pyogenes strain SF370 are composed of a major backbone subunit (Spy0128) and two minor subunits (Spy0125 and Spy0130), joined covalently by a pilin polymerase (Spy0129). Previous studies using recombinant proteins showed that both minor subunits bind to human pharyngeal (Detroit) cells (A. G. Manetti et al., Mol. Microbiol. 64:968-983, 2007), suggesting both may act as pilus-presented adhesins. While confirming these binding properties, studies described here indicate that Spy0125 is the pilus-presented adhesin and that Spy0130 has a distinct role as a wall linker. Pili were localized predominantly to cell wall fractions of the wild-type S. pyogenes parent strain and a spy0125 deletion mutant. In contrast, they were found almost exclusively in culture supernatants in both spy0130 and srtA deletion mutants, indicating that the housekeeping sortase (SrtA) attaches pili to the cell wall by using Spy0130 as a linker protein. Adhesion assays with antisera specific for individual subunits showed that only anti-rSpy0125 serum inhibited adhesion of wild-type S. pyogenes to human keratinocytes and tonsil epithelium to a significant extent. Spy0125 was localized to the tip of pili, based on a combination of mutant analysis and liquid chromatography-tandem mass spectrometry analysis of purified pili. Assays comparing parent and mutant strains confirmed its role as the adhesin. Unexpectedly, apparent spontaneous cleavage of a labile, proline-rich (8 of 14 residues) sequence separating the N-terminal ∼1/3 and C-terminal ∼2/3 of Spy0125 leads to loss of the N-terminal region, but analysis of internal spy0125 deletion mutants confirmed that this has no significant effect on adhesion.The group A Streptococcus (S. pyogenes) is an exclusively human pathogen that commonly colonizes either the pharynx or skin, where local spread can give rise to various inflammatory conditions such as pharyngitis, tonsillitis, sinusitis, or erysipelas. Although often mild and self-limiting, GAS infections are occasionally very severe and sometimes lead to life-threatening diseases, such as necrotizing fasciitis or streptococcal toxic shock syndrome. A wide variety of cell surface components and extracellular products have been shown or suggested to play important roles in S. pyogenes virulence, including cell surface pili (1, 6, 32). Pili expressed by the serotype M1 S. pyogenes strain SF370 mediate specific adhesion to intact human tonsil epithelia and to primary human keratinocytes, as well as cultured keratinocyte-derived HaCaT cells, but not to Hep-2 or A549 cells (1). They also contribute to adhesion to a human pharyngeal cell line (Detroit cells) and to biofilm formation (29).Over the past 5 years, pili have been discovered on an increasing number of important Gram-positive bacterial pathogens, including Bacillus cereus (4), Bacillus anthracis (4, 5), Corynebacterium diphtheriae (13, 14, 19, 26, 27, 44, 46, 47), Streptococcus agalactiae (7, 23, 38), and Streptococcus pneumoniae (2, 3, 24, 25, 34), as well as S. pyogenes (1, 29, 32). All these species produce pili that are composed of a single major subunit plus either one or two minor subunits. During assembly, the individual subunits are covalently linked to each other via intermolecular isopeptide bonds, catalyzed by specialized membrane-associated transpeptidases that may be described as pilin polymerases (4, 7, 25, 41, 44, 46). These are related to the classical housekeeping sortase (usually, but not always, designated SrtA) that is responsible for anchoring many proteins to Gram-positive bacterial cell walls (30, 31, 33). The C-terminal ends of sortase target proteins include a cell wall sorting (CWS) motif consisting, in most cases, of Leu-Pro-X-Thr-Gly (LPXTG, where X can be any amino acid) (11, 40). Sortases cleave this substrate between the Thr and Gly residues and produce an intermolecular isopeptide bond linking the Thr to a free amino group provided by a specific target. In attaching proteins to the cell wall, the target amino group is provided by the lipid II peptidoglycan precursor (30, 36, 40). In joining pilus subunits, the target is the ɛ-amino group in the side chain of a specific Lys residue in the second subunit (14, 18, 19). Current models of pilus biogenesis envisage repeated transpeptidation reactions adding additional subunits to the base of the growing pilus, until the terminal subunit is eventually linked covalently via an intermolecular isopeptide bond to the cell wall (28, 41, 45).The major subunit (sometimes called the backbone or shaft subunit) extends along the length of the pilus and appears to play a structural role, while minor subunits have been detected either at the tip, the base, and/or at occasional intervals along the shaft, depending on the species (4, 23, 24, 32, 47). In S. pneumoniae and S. agalactiae one of the minor subunits acts as an adhesin, while the second appears to act as a linker between the base of the assembled pilus and the cell wall (7, 15, 22, 34, 35). It was originally suggested that both minor subunits of C. diphtheriae pili could act as adhesins (27). However, recent data showed one of these has a wall linker role (26, 44) and may therefore not function as an adhesin.S. pyogenes strain SF370 pili are composed of a major (backbone) subunit, termed Spy0128, plus two minor subunits, called Spy0125 and Spy0130 (1, 32). All three are required for efficient adhesion to target cells (1). Studies employing purified recombinant proteins have shown that both of the minor subunits, but not the major subunit, bind to Detroit cells (29), suggesting both might act as pilus-presented adhesins. Here we report studies employing a combination of recombinant proteins, specific antisera, and allelic replacement mutants which show that only Spy0125 is the pilus-presented adhesin and that Spy0130 has a distinct role in linking pili to the cell wall.     

Analysis of the Viral Elements Required in the Nuclear Import of HIV-1 DNA

HIV-1 possesses an exquisite ability to infect cells independently from their cycling status by undergoing an active phase of nuclear import through the nuclear pore. This property has been ascribed to the presence of karyophilic elements present in viral nucleoprotein complexes, such as the matrix protein (MA); Vpr; the integrase (IN); and a cis-acting structure present in the newly synthesized DNA, the DNA flap. However, their role in nuclear import remains controversial at best. In the present study, we carried out a comprehensive analysis of the role of these elements in nuclear import in a comparison between several primary cell types, including stimulated lymphocytes, macrophages, and dendritic cells. We show that despite the fact that none of these elements is absolutely required for nuclear import, disruption of the central polypurine tract-central termination sequence (cPPT-CTS) clearly affects the kinetics of viral DNA entry into the nucleus. This effect is independent of the cell cycle status of the target cells and is observed in cycling as well as in nondividing primary cells, suggesting that nuclear import of viral DNA may occur similarly under both conditions. Nonetheless, this study indicates that other components are utilized along with the cPPT-CTS for an efficient entry of viral DNA into the nucleus.Lentiviruses display an exquisite ability to infect dividing and nondividing cells alike that is unequalled among Retroviridae. This property is thought to be due to the particular behavior or composition of the viral nucleoprotein complexes (NPCs) that are liberated into the cytoplasm of target cells upon virus-to-cell membrane fusion and that allow lentiviruses to traverse an intact nuclear membrane (17, 28, 29, 39, 52, 55, 67, 79). In the case of the human immunodeficiency type I virus (HIV-1), several studies over the years identified viral components of such structures with intrinsic karyophilic properties and thus perfect candidates for mediation of the passage of viral DNA (vDNA) through the nuclear pore: the matrix protein (MA); Vpr; the integrase (IN); and a three-stranded DNA flap, a structure present in neo-synthesized viral DNA, specified by the central polypurine tract-central termination sequence (cPPT-CTS). It is clear that these elements may mediate nuclear import directly or via the recruitment of the host''s proteins, and indeed, several cellular proteins have been found to influence HIV-1 infection during nuclear import, like the karyopherin α2 Rch1 (38); importin 7 (3, 30, 93); the transportin SR-2 (13, 20); or the nucleoporins Nup98 (27), Nup358/RANBP2, and Nup153 (13, 56).More recently, the capsid protein (CA), the main structural component of viral nucleoprotein complexes at least upon their cytoplasmic entry, has also been suggested to be involved in nuclear import or in postnuclear entry steps (14, 25, 74, 90, 92). Whether this is due to a role for CA in the shaping of viral nucleoprotein complexes or to a direct interaction between CA and proteins involved in nuclear import remains at present unknown.Despite a large number of reports, no single viral or cellular element has been described as absolutely necessary or sufficient to mediate lentiviral nuclear import, and important controversies as to the experimental evidences linking these elements to this step exist. For example, MA was among the first viral protein of HIV-1 described to be involved in nuclear import, and 2 transferable nuclear localization signals (NLSs) have been described to occur at its N and C termini (40). However, despite the fact that early studies indicated that the mutation of these NLSs perturbed HIV-1 nuclear import and infection specifically in nondividing cells, such as macrophages (86), these findings failed to be confirmed in more-recent studies (23, 33, 34, 57, 65, 75).Similarly, Vpr has been implicated by several studies of the nuclear import of HIV-1 DNA (1, 10, 21, 43, 45, 47, 64, 69, 72, 73, 85). Vpr does not possess classical NLSs, yet it displays a transferable nucleophilic activity when fused to heterologous proteins (49-51, 53, 77, 81) and has been shown to line onto the nuclear envelope (32, 36, 47, 51, 58), where it can truly facilitate the passage of the viral genome into the nucleus. However, the role of Vpr in this step remains controversial, as in some instances Vpr is not even required for viral replication in nondividing cells (1, 59).Conflicting results concerning the role of IN during HIV-1 nuclear import also exist. Indeed, several transferable NLSs have been described to occur in the catalytic core and the C-terminal DNA binding domains of IN, but for some of these, initial reports of nuclear entry defects (2, 9, 22, 46, 71) were later shown to result from defects at steps other than nuclear import (60, 62, 70, 83). These reports do not exclude a role for the remaining NLSs in IN during nuclear import, and they do not exclude the possibility that IN may mediate this step by associating with components of the cellular nuclear import machinery, such as importin alpha and beta (41), importin 7 (3, 30, 93, 98), and, more recently, transportin-SR2 (20).The central DNA flap, a structure present in lentiviruses and in at least 1 yeast retroelement (44), but not in other orthoretroviruses, has also been involved in the nuclear import of viral DNA (4, 6, 7, 31, 78, 84, 95, 96), and more recently, it has been proposed to provide a signal for viral nucleoprotein complexes uncoating in the proximity of the nuclear pore, with the consequence of providing a signal for import (8). However, various studies showed an absence or weakness of nuclear entry defects in viruses devoid of the DNA flap (24, 26, 44, 61).Overall, the importance of viral factors in HIV-1 nuclear import is still unclear. The discrepancies concerning the role of MA, IN, Vpr, and cPPT-CTS in HIV-1 nuclear import could in part be explained by their possible redundancy. To date, only one comprehensive study analyzed the role of these four viral potentially karyophilic elements together (91). This study showed that an HIV-1 chimera where these elements were either deleted or replaced by their murine leukemia virus (MLV) counterparts was, in spite of an important infectivity defect, still able to infect cycling and cell cycle-arrested cell lines to similar efficiencies. If this result indicated that the examined viral elements of HIV-1 were dispensable for the cell cycle independence of HIV, as infections proceeded equally in cycling and arrested cells, they did not prove that they were not required in nuclear import, because chimeras displayed a severe infectivity defect that precluded their comparison with the wild type (WT).Nuclear import and cell cycle independence may not be as simply linked as previously thought. On the one hand, there has been no formal demonstration that the passage through the nuclear pore, and thus nuclear import, is restricted to nondividing cells, and for what we know, this passage may be an obligatory step in HIV infection in all cells, irrespective of their cycling status. In support of this possibility, certain mutations in viral elements of HIV affect nuclear import in dividing as well as in nondividing cells (4, 6, 7, 31, 84, 95). On the other hand, cell cycle-independent infection may be a complex phenomenon that is made possible not only by the ability of viral DNA to traverse the nuclear membrane but also by its ability to cope with pre- and postnuclear entry events, as suggested by the phenotypes of certain CA mutants (74, 92).Given that the cellular environment plays an important role during the early steps of viral infection, we chose to analyze the role of the four karyophilic viral elements of HIV-1 during infection either alone or combined in a wide comparison between cells highly susceptible to infection and more-restrictive primary cell targets of HIV-1 in vivo, such as primary blood lymphocytes (PBLs), monocyte-derived macrophages (MDM), and dendritic cells (DCs).In this study, we show that an HIV-1-derived virus in which the 2 NLSs of MA are mutated and the IN, Vpr, and cPPT-CTS elements are removed displays no detectable nuclear import defect in HeLa cells independently of their cycling status. However, this mutant virus is partially impaired for nuclear entry in primary cells and more specifically in DCs and PBLs. We found that this partial defect is specified by the cPPT-CTS, while the 3 remaining elements seem to play no role in nuclear import. Thus, our study indicates that the central DNA flap specifies the most important role among the viral elements involved thus far in nuclear import. However, it also clearly indicates that the role played by the central DNA flap is not absolute and that its importance varies depending on the cell type, independently from the dividing status of the cell.     

Virus Entry via the Alternative Coreceptors CCR3 and FPRL1 Differs by Human Immunodeficiency Virus Type 1 Subtype

Human immunodeficiency virus type 1 (HIV-1) infects target cells by binding to CD4 and a chemokine receptor, most commonly CCR5. CXCR4 is a frequent alternative coreceptor (CoR) in subtype B and D HIV-1 infection, but the importance of many other alternative CoRs remains elusive. We have analyzed HIV-1 envelope (Env) proteins from 66 individuals infected with the major subtypes of HIV-1 to determine if virus entry into highly permissive NP-2 cell lines expressing most known alternative CoRs differed by HIV-1 subtype. We also performed linear regression analysis to determine if virus entry via the major CoR CCR5 correlated with use of any alternative CoR and if this correlation differed by subtype. Virus pseudotyped with subtype B Env showed robust entry via CCR3 that was highly correlated with CCR5 entry efficiency. By contrast, viruses pseudotyped with subtype A and C Env proteins were able to use the recently described alternative CoR FPRL1 more efficiently than CCR3, and use of FPRL1 was correlated with CCR5 entry. Subtype D Env was unable to use either CCR3 or FPRL1 efficiently, a unique pattern of alternative CoR use. These results suggest that each subtype of circulating HIV-1 may be subject to somewhat different selective pressures for Env-mediated entry into target cells and suggest that CCR3 may be used as a surrogate CoR by subtype B while FPRL1 may be used as a surrogate CoR by subtypes A and C. These data may provide insight into development of resistance to CCR5-targeted entry inhibitors and alternative entry pathways for each HIV-1 subtype.Human immunodeficiency virus type 1 (HIV-1) infects target cells by binding first to CD4 and then to a coreceptor (CoR), of which C-C chemokine receptor 5 (CCR5) is the most common (6, 53). CXCR4 is an additional CoR for up to 50% of subtype B and D HIV-1 isolates at very late stages of disease (4, 7, 28, 35). Many other seven-membrane-spanning G-protein-coupled receptors (GPCRs) have been identified as alternative CoRs when expressed on various target cell lines in vitro, including CCR1 (76, 79), CCR2b (24), CCR3 (3, 5, 17, 32, 60), CCR8 (18, 34, 38), GPR1 (27, 65), GPR15/BOB (22), CXCR5 (39), CXCR6/Bonzo/STRL33/TYMSTR (9, 22, 25, 45, 46), APJ (26), CMKLR1/ChemR23 (49, 62), FPLR1 (67, 68), RDC1 (66), and D6 (55). HIV-2 and simian immunodeficiency virus SIVmac isolates more frequently show expanded use of these alternative CoRs than HIV-1 isolates (12, 30, 51, 74), and evidence that alternative CoRs other than CXCR4 mediate infection of primary target cells by HIV-1 isolates is sparse (18, 30, 53, 81). Genetic deficiency in CCR5 expression is highly protective against HIV-1 transmission (21, 36), establishing CCR5 as the primary CoR. The importance of alternative CoRs other than CXCR4 has remained elusive despite many studies (1, 30, 70, 81). Expansion of CoR use from CCR5 to include CXCR4 is frequently associated with the ability to use additional alternative CoRs for viral entry (8, 16, 20, 63, 79) in most but not all studies (29, 33, 40, 77, 78). This finding suggests that the sequence changes in HIV-1 env required for use of CXCR4 as an additional or alternative CoR (14, 15, 31, 37, 41, 57) are likely to increase the potential to use other alternative CoRs.We have used the highly permissive NP-2/CD4 human glioma cell line developed by Soda et al. (69) to classify virus entry via the alternative CoRs CCR1, CCR3, CCR8, GPR1, CXCR6, APJ, CMKLR1/ChemR23, FPRL1, and CXCR4. Full-length molecular clones of 66 env genes from most prevalent HIV-1 subtypes were used to generate infectious virus pseudotypes expressing a luciferase reporter construct (19, 57). Two types of analysis were performed: the level of virus entry mediated by each alternative CoR and linear regression of entry mediated by CCR5 versus all other alternative CoRs. We thus were able to identify patterns of alternative CoR use that were subtype specific and to determine if use of any alternative CoR was correlated or independent of CCR5-mediated entry. The results obtained have implications for the evolution of env function, and the analyses revealed important differences between subtype B Env function and all other HIV-1 subtypes.     

Glycerol Metabolism Is Important for Cytotoxicity of Mycoplasma pneumoniae

Glycerol is one of the few carbon sources that can be utilized by Mycoplasma pneumoniae. Glycerol metabolism involves uptake by facilitated diffusion, phosphorylation, and the oxidation of glycerol 3-phosphate to dihydroxyacetone phosphate, a glycolytic intermediate. We have analyzed the expression of the genes involved in glycerol metabolism and observed constitutive expression irrespective of the presence of glycerol or preferred carbon sources. Similarly, the enzymatic activity of glycerol kinase is not modulated by HPr-dependent phosphorylation. This lack of regulation is unique among the bacteria for which glycerol metabolism has been studied so far. Two types of enzymes catalyze the oxidation of glycerol 3-phosphate: oxidases and dehydrogenases. Here, we demonstrate that the enzyme encoded by the M. pneumoniae glpD gene is a glycerol 3-phosphate oxidase that forms hydrogen peroxide rather than NADH₂. The formation of hydrogen peroxide by GlpD is crucial for cytotoxic effects of M. pneumoniae. A glpD mutant exhibited a significantly reduced formation of hydrogen peroxide and a severely reduced cytotoxicity. Attempts to isolate mutants affected in the genes of glycerol metabolism revealed that only the glpD gene, encoding the glycerol 3-phosphate oxidase, is dispensable. In contrast, the glpF and glpK genes, encoding the glycerol facilitator and the glycerol kinase, respectively, are essential in M. pneumoniae. Thus, the enzymes of glycerol metabolism are crucial for the pathogenicity of M. pneumoniae but also for other essential, yet-to-be-identified functions in the M. pneumoniae cell.Mycoplasma pneumoniae causes infections of the upper and lower respiratory tracts. These bacteria are responsible for a large fraction of community-acquired pneumonias. Although usually harmless for adult patients, M. pneumoniae may cause severe disease in children or elderly people. In addition, M. pneumoniae is involved in extrapulmonary complications such as pediatric encephalitis and erythema multiforme (for reviews, see references 15, 21, and 34).M. pneumoniae and its relatives, the Mollicutes, are all characterized by the lack of a cell wall and a very close adaptation to a life within a eukaryotic host. This close adaptation is reflected by degenerative genome evolution that resulted in an extreme genome reduction. As a result, the Mollicutes are the organisms that are capable of independent life with the smallest known genome. M. pneumoniae has a genome of 816 kb and encodes only 688 proteins (18). This genome reduction is taken even further in the close relative Mycoplasma genitalium, which has only 482 protein-coding genes (18). Thus, the analysis of the Mollicutes allows us to study a minimal form of natural life. This question has recently attracted much interest and resulted in the determination of the essential gene sets of M. pneumoniae, M. genitalium, and, more recently, Mycoplasma pulmonis (6, 20). In M. genitalium, with the most reduced genomes, only 100 out of the 482 protein-coding genes are dispensable, suggesting that the remaining 382 genes form the essential gene set (7).Reductive genome evolution in M. pneumoniae is still under way: the genes for the utilization of mannitol as a carbon source seem to be present in M. pneumoniae; however, this substrate cannot be used by the bacteria. M. genitalium, which is further advanced in genome reduction, has lost the genes for mannitol transport and oxidation. It was therefore suggested that the genes for mannitol utilization in M. pneumoniae either are not expressed or encode inactive proteins (12).In M. pneumoniae as well as in other Mollicutes, pathogenicity is closely linked to carbon metabolism (13). M. pneumoniae can use glucose, fructose, and glycerol as the only carbon sources (12). Studies with Mycoplasma mycoides revealed that glycerol metabolism has a major impact on the pathogenicity of these bacteria. Oxidation of glycerol involves the glycerol 3-phosphate oxidase, which produces hydrogen peroxide rather than NADH₂, which is generated by the glycerol 3-phosphate dehydrogenase in most other bacteria (28). In addition to the induction of autoimmune responses, the formation of hydrogen peroxide is the only established mechanism by which mycoplasmas cause damage to their hosts (31, 34). Pathogenic strains of M. mycoides possess a highly active ABC transport system for glycerol in addition to the ubiquitous glycerol facilitator (33). The efficient formation of hydrogen peroxide by the membrane-bound glycerol 3-phosphate oxidase is the major virulence factor of the highly pathogenic strains of M. mycoides (28).M. pneumoniae possesses the complete set of genes for glycerol utilization, and the bacteria do indeed use this carbon source (12). The first component in glycerol metabolism is the glycerol facilitator encoded by the glpF gene. The transported glycerol is then phosphorylated by the glycerol kinase (product of glpK), and glycerol 3-phosphate is subsequently oxidized to dihydroxyacetone phosphate, a glycolytic intermediate. The relevant enzyme is annotated as glycerol 3-phosphate dehydrogenase (encoded by the gene glpD) in M. pneumoniae (17).In all organisms studied so far, glycerol metabolism is under dual control: the genes involved in glycerol utilization are expressed only if glycerol or glycerol 3-phosphate is present in the medium, and they are not expressed in the presence of glucose, the preferred carbon source (3, 4). This second mode of regulation, carbon catabolite repression, involves two distinct mechanisms in the Firmicutes, from which the Mollicutes evolved. In the presence of preferred sugars, the CcpA repressor protein binds in the promoter regions of glycerol utilization genes and prevents their expression. Moreover, the molecular inducer of the system, glycerol 3-phosphate, is formed only in the absence of glucose. This results from the low activity of the glycerol kinase. This enzyme is activated upon phosphorylation by HPr, a protein of the phosphoenolpyruvate:sugar phosphotransferase system (PTS). HPr can phosphorylate other proteins only in the absence of glucose, thus providing a link between glucose availability, the activity of the glycerol kinase, and the induction of the glycerol utilization genes (3). Nothing is known about the regulation of glycerol utilization in any member of the Mollicutes; however, regulatory events seem to be rare in these organisms due to the lack of regulatory proteins, among them CcpA.In this work, we studied the mechanisms of glycerol utilization in M. pneumoniae, its regulation, and its contribution to cytotoxicity. We demonstrate constitutive expression of the genes for glycerol utilization in M. pneumoniae. As observed in M. mycoides, glycerol 3-phosphate oxidation involves the formation of hydrogen peroxide and is important for damaging the host cells.     

Trafficking of UL37 Proteins into Mitochondrion-Associated Membranes during Permissive Human Cytomegalovirus Infection

Human cytomegalovirus (HCMV) UL37 proteins traffic sequentially from the endoplasmic reticulum (ER) to the mitochondria. In transiently transfected cells, UL37 proteins traffic into the mitochondrion-associated membranes (MAM), the site of contact between the ER and mitochondria. In HCMV-infected cells, the predominant UL37 exon 1 protein, pUL37x1, trafficked into the ER, the MAM, and the mitochondria. Surprisingly, a component of the MAM calcium signaling junction complex, cytosolic Grp75, was increasingly enriched in heavy MAM from HCMV-infected cells. These studies show the first documented case of a herpesvirus protein, HCMV pUL37x1, trafficking into the MAM during permissive infection and HCMV-induced alteration of the MAM protein composition.The human cytomegalovirus (HCMV) UL37 immediate early (IE) locus expresses multiple products, including the predominant UL37 exon 1 protein, pUL37x1, also known as viral mitochondrion-localized inhibitor of apoptosis (vMIA), during lytic infection (16, 22, 24, 39, 44). The UL37 glycoprotein (gpUL37) shares UL37x1 sequences and is internally cleaved, generating pUL37_NH2 and gpUL37_COOH (2, 22, 25, 26). pUL37x1 is essential for the growth of HCMV in humans (17) and for the growth of primary HCMV strains (20) and strain AD169 (14, 35, 39, 49) but not strain TownevarATCC in permissive human fibroblasts (HFFs) (27).pUL37x1 induces calcium (Ca²⁺) efflux from the endoplasmic reticulum (ER) (39), regulates viral early gene expression (5, 10), disrupts F-actin (34, 39), recruits and inactivates Bax at the mitochondrial outer membrane (MOM) (4, 31-33), and inhibits mitochondrial serine protease at late times of infection (28).Intriguingly, HCMV UL37 proteins localize dually in the ER and in the mitochondria (2, 9, 16, 17, 24-26). In contrast to other characterized, similarly localized proteins (3, 6, 11, 23, 30, 38), dual-trafficking UL37 proteins are noncompetitive and sequential, as an uncleaved gpUL37 mutant protein is ER translocated, N-glycosylated, and then imported into the mitochondria (24, 26).Ninety-nine percent of ∼1,000 mitochondrial proteins are synthesized in the cytosol and directly imported into the mitochondria (13). However, the mitochondrial import of ER-synthesized proteins is poorly understood. One potential pathway is the use of the mitochondrion-associated membrane (MAM) as a transfer waypoint. The MAM is a specialized ER subdomain enriched in lipid-synthetic enzymes, lipid-associated proteins, such as sigma-1 receptor, and chaperones (18, 45). The MAM, the site of contact between the ER and the mitochondria, permits the translocation of membrane-bound lipids, including ceramide, between the two organelles (40). The MAM also provides enriched Ca²⁺ microdomains for mitochondrial signaling (15, 36, 37, 43, 48). One macromolecular MAM complex involved in efficient ER-to-mitochondrion Ca²⁺ transfer is comprised of ER-bound inositol 1,4,5-triphosphate receptor 3 (IP3R3), cytosolic Grp75, and a MOM-localized voltage-dependent anion channel (VDAC) (42). Another MAM-stabilizing protein complex utilizes mitofusin 2 (Mfn2) to tether ER and mitochondrial organelles together (12).HCMV UL37 proteins traffic into the MAM of transiently transfected HFFs and HeLa cells, directed by their NH₂-terminal leaders (8, 47). To determine whether the MAM is targeted by UL37 proteins during infection, we fractionated HCMV-infected cells and examined pUL37x1 trafficking in microsomes, mitochondria, and the MAM throughout all temporal phases of infection. Because MAM domains physically bridge two organelles, multiple markers were employed to verify the purity and identity of the fractions (7, 8, 19, 46, 47).(These studies were performed in part by Chad Williamson in partial fulfillment of his doctoral studies in the Biochemistry and Molecular Genetics Program at George Washington Institute of Biomedical Sciences.)HFFs and life-extended (LE)-HFFs were grown and not infected or infected with HCMV (strain AD169) at a multiplicity of 3 PFU/cell as previously described (8, 26, 47). Heavy (6,300 × g) and light (100,000 × g) MAM fractions, mitochondria, and microsomes were isolated at various times of infection and quantified as described previously (7, 8, 47). Ten- or 20-μg amounts of total lysate or of subcellular fractions were resolved by SDS-PAGE in 4 to 12% Bis-Tris NuPage gels (Invitrogen) and examined by Western analyses (7, 8, 26). Twenty-microgram amounts of the fractions were not treated or treated with proteinase K (3 μg) for 20 min on ice, resolved by SDS-PAGE, and probed by Western analysis. The blots were probed with rabbit anti-UL37x1 antiserum (DC35), goat anti-dolichyl phosphate mannose synthase 1 (DPM1), goat anti-COX2 (both from Santa Cruz Biotechnology), mouse anti-Grp75 (StressGen Biotechnologies), and the corresponding horseradish peroxidase-conjugated secondary antibodies (8, 47). Reactive proteins were detected by enhanced chemiluminescence (ECL) reagents (Pierce), and images were digitized as described previously (26, 47).     

Roles of Small,Acid-Soluble Spore Proteins and Core Water Content in Survival of Bacillus subtilis Spores Exposed to Environmental Solar UV Radiation

Spores of Bacillus subtilis contain a number of small, acid-soluble spore proteins (SASP) which comprise up to 20% of total spore core protein. The multiple α/β-type SASP have been shown to confer resistance to UV radiation, heat, peroxides, and other sporicidal treatments. In this study, SASP-defective mutants of B. subtilis and spores deficient in dacB, a mutation leading to an increased core water content, were used to study the relative contributions of SASP and increased core water content to spore resistance to germicidal 254-nm and simulated environmental UV exposure (280 to 400 nm, 290 to 400 nm, and 320 to 400 nm). Spores of strains carrying mutations in sspA, sspB, and both sspA and sspB (lacking the major SASP-α and/or SASP-β) were significantly more sensitive to 254-nm and all polychromatic UV exposures, whereas the UV resistance of spores of the sspE strain (lacking SASP-γ) was essentially identical to that of the wild type. Spores of the dacB-defective strain were as resistant to 254-nm UV-C radiation as wild-type spores. However, spores of the dacB strain were significantly more sensitive than wild-type spores to environmental UV treatments of >280 nm. Air-dried spores of the dacB mutant strain had a significantly higher water content than air-dried wild-type spores. Our results indicate that α/β-type SASP and decreased spore core water content play an essential role in spore resistance to environmentally relevant UV wavelengths whereas SASP-γ does not.Spores of Bacillus spp. are highly resistant to inactivation by different physical stresses, such as toxic chemicals and biocidal agents, desiccation, pressure and temperature extremes, and high fluences of UV or ionizing radiation (reviewed in references 33, 34, and 48). Under stressful environmental conditions, cells of Bacillus spp. produce endospores that can stay dormant for extended periods. The reason for the high resistance of bacterial spores to environmental extremes lies in the structure of the spore. Spores possess thick layers of highly cross-linked coat proteins, a modified peptidoglycan spore cortex, a low core water content, and abundant intracellular constituents, such as the calcium chelate of dipicolinic acid and α/β-type small, acid-soluble spore proteins (α/β-type SASP), the last two of which protect spore DNA (6, 42, 46, 48, 52). DNA damage accumulated during spore dormancy is also efficiently repaired during spore germination (33, 47, 48). UV-induced DNA photoproducts are repaired by spore photoproduct lyase and nucleotide excision repair, DNA double-strand breaks (DSB) by nonhomologous end joining, and oxidative stress-induced apurinic/apyrimidinic (AP) sites by AP endonucleases and base excision repair (15, 26-29, 34, 43, 53, 57).Monochromatic 254-nm UV radiation has been used as an efficient and cost-effective means of disinfecting surfaces, building air, and drinking water supplies (31). Commonly used test organisms for inactivation studies are bacterial spores, usually spores of Bacillus subtilis, due to their high degree of resistance to various sporicidal treatments, reproducible inactivation response, and safety (1, 8, 19, 31, 48). Depending on the Bacillus species analyzed, spores are 10 to 50 times more resistant than growing cells to 254-nm UV radiation. In addition, most of the laboratory studies of spore inactivation and radiation biology have been performed using monochromatic 254-nm UV radiation (33, 34). Although 254-nm UV-C radiation is a convenient germicidal treatment and relevant to disinfection procedures, results obtained by using 254-nm UV-C are not truly representative of results obtained using UV wavelengths that endospores encounter in their natural environments (34, 42, 50, 51, 59). However, sunlight reaching the Earth''s surface is not monochromatic 254-nm radiation but a mixture of UV, visible, and infrared radiation, with the UV portion spanning approximately 290 to 400 nm (33, 34, 36). Thus, our knowledge of spore UV resistance has been constructed largely using a wavelength of UV radiation not normally reaching the Earth''s surface, even though ample evidence exists that both DNA photochemistry and microbial responses to UV are strongly wavelength dependent (2, 30, 33, 36).Of recent interest in our laboratories has been the exploration of factors that confer on B. subtilis spores resistance to environmentally relevant extreme conditions, particularly solar UV radiation and extreme desiccation (23, 28, 30, 34 36, 48, 52). It has been reported that α/β-type SASP but not SASP-γ play a major role in spore resistance to 254-nm UV-C radiation (20, 21) and to wet heat, dry heat, and oxidizing agents (48). In contrast, increased spore water content was reported to affect B. subtilis spore resistance to moist heat and hydrogen peroxide but not to 254-nm UV-C (12, 40, 48). However, the possible roles of SASP-α, -β, and -γ and core water content in spore resistance to environmentally relevant solar UV wavelengths have not been explored. Therefore, in this study, we have used B. subtilis strains carrying mutations in the sspA, sspB, sspE, sspA and sspB, or dacB gene to investigate the contributions of SASP and increased core water content to the resistance of B. subtilis spores to 254-nm UV-C and environmentally relevant polychromatic UV radiation encountered on Earth''s surface.