Characterization of E. coli manganese superoxide dismutase binding to RNA and DNA

Bacterial manganese superoxide dismutase (MnSOD) has been shown to localize to the chromosomal portion of the cell and impart protection from ionizing radiation to DNA. The binding affinity of bacterial MnSOD to non-sequence specific double stranded oligomeric DNA has been quantitated previously by nitrocellulose filter binding and gel shift assays. In the current study we have examined the equilibrium binding of Escherichia coli MnSOD to poly(U), poly(A), poly(C), poly(dU) and double-stranded (ds) DNA. Equilibrium association constant, K_obs, was measured by monitoring intrinsic tryptophan fluorescence quenching. Based on the extent of quenching, K_obs was determined as a function of monovalent salt (MX) concentration and type, as well as temperature, from which ΔG°_obs and ΔH°_obs were determined. It was found that the polynucleotides bind to MnSOD in the following affinity hierarchy, poly(dU) > poly(U) > dsDNA > poly(A) > poly(C). The differences in the hierarchy were not large in magnitude as the poly(dU) bound with less than a 100-fold higher affinity than poly(C) at any given [MX]. For each polynucleotide, K_obs decreases only slightly with increasing [K⁺], surprising for a relatively non-specific nucleic acid protein. Thus, our finding that MnSOD can bind to RNA leads to the possibility that MnSOD may confer protection to RNA, as well. This is, as of yet, untested. Typically one would expect strong electrostatic interactions to dominate a non-specific binding event like that, but our results show an unexpectedly strong non-electrostatic contribution to the binding.     

Cationic porphyrin–quinoxaline conjugate as a photochemically triggered novel cytotoxic agent

A novel cationic porphyrin–quinoxaline conjugate 8 was prepared in good yield by the coupling of activated quinoxaline carboxylic acid 5 with an appropriate aminoporphyrin. The UV–vis spectra of conjugate 8 with the addition of ctDNA shows substantial hypochromicity (39%) and a red shift (12 nm) in the Soret band indicating intercalation and self stacking along the surface. The binding constant of conjugate 8 with ctDNA was determined to be 1.26 × 10⁶ M^?1. The porphyrin–quinoxaline conjugate 8 displayed enhanced photocytotoxicity (IC₅₀ = 0.06 μM) when compared to TMPyP against A549 cancer cells.     

Cationic perylenediimide as a specific fluorescent binder to mismatch containing DNA

Small ligand molecules, which can recognize thermodynamically unstable site within DNA, such as mismatch base pair, abasic site, and single-bulge, have attracted much attention because of their potential diagnostics and biological applications. In this paper, we describe the binding of cationic perylenediimide (cPDI) molecules to thymine-containing mismatch base pair in DNA and the formation of cPDI dimer at the mismatch site. The cPDI dimer exhibits a characteristic excimer emission at 650 nm. For T/T mismatch containing DNA, the switching behavior from the PDI dimer (650 nm) to the monomer (550 nm) emission in specific response to Hg²⁺ ion was observed.     

Targeting the ICB2 site of the topoisomerase IIα promoter with a formamido-pyrrole–imidazole–pyrrole H-pin polyamide

The synthesis, DNA binding characteristics and biological activity of an N-formamido pyrrole- and imidazole-containing H-pin polyamide (f-PIP H-pin, 2) designed to selectively target the ICB2 site on the topoIIα promoter, is reported herein. Thermal denaturation, circular dichroism, isothermal titration calorimetry, surface plasmon resonance and DNase I footprinting studies demonstrated that 2 maintained the selectivity of the unlinked parent monomer f-PIP (1) and with a slight enhancement in binding affinity (K_eq = 5 × 10⁵ M^?1) to the cognate site (5′-TACGAT-3′). H-pin 2 also exhibited comparable ability to inhibit NF-Y binding to 1, as demonstrated by gel shift studies. However, in stark contrast to monomer 1, the H-pin did not affect the up-regulation of topoisomerase IIα (topoIIα) in cells (Western blot), suggesting that the H-pin does not enter the nucleus. This study is the first to the authors’ knowledge that reports such a markedly different cellular response between two compounds of almost identical binding characteristics.     

Toxic and genotoxic effects of potassium dichromate in Pseudokirchneriella subcapitata detected by microscopy and AFLP marker analysis

The effect of chromium on Pseudokirchneriella subcapitata has been assessed using different approaches: growth rate, metabolic activity microscopy analyses, and amplified fragment length polymorphism (AFLP) assessment of DNA damage. Starting from 24 h of treatment all the tested concentrations resulted in consistent algal growth inhibition. The average daily growth rate after 72 h calculated for the control (0.53 ± 0.01) was statistically higher than those estimated for cell treated with 1, 2.5, 5 and 7.5 μg g⁻¹ potassium dichromate (0.46 ± 0.02; 0.32 ± 0.01; 0.25 ± 0.01 and −0.02 ± 0.04, respectively). A reduction of viable cell numbers, estimated with FDA approach, was also observed after 24 h treatment for all the tested chromium concentrations apart from the lowest (1 μg g⁻¹ potassium dichromate). A recovery of esterase activity was detected after 48 and 72 h for all treatments with the except of the 7.5 μg g⁻¹ potassium dichromate treated samples showing a very modest recovery. This data suggests that potassium dichromate is, even from the lowest tested concentration, highly toxic to P. subcapitata, and that this algal strain is a sensitive organism suitable for monitoring chromium in water. Our data also suggest that although algal counting by microscope and the FDA test gave similar indications concerning chromium effect, the FDA test was not completely reliable. In fact, we observed a decrease in the FDA stained cell numbers in control samples after 48 and 72 h of treatment, when most cells were actively proliferating. This lack of fluorescence could be explained by an uncontrolled fluorescein efflux due to the interaction of many experimental factors. The genotoxic effects of the different chromium concentrations were investigated by analyses of the DNA from control and treated algal samples, 72 h after inoculation. AFLP analysis revealed a total of 258 bands, 109 of which were polymorphics. Analysis of the AFLP matrix suggests that potassium dichromate is a powerful genotoxic agent, inducing genetic mutations also at the lowest tested concentration (0.35 μg g⁻¹). Furthermore, we observed a correlation between the polymorphic bands with increasing chromium concentration. Finally, the absence of preferential mutation sites suggests that the chromium induced DNA changes are randomly distributed in the genome.     

Isolation of hexavalent chromium resistant bacteria from industrial saline effluents and their ability of bioaccumulation

The mixed cultures has been isolated from industrial saline wastewater contaminated with chromium(VI), using enrichment in the presence of 50 mg l⁻¹ chromium(VI) and 4% (w/v) NaCl at pH 8. In this study, the molasses (M) medium was selected a suitable medium for the effective chromium bioaccumulation by the mixed cultures. Eleven pure isolates obtained from mixed cultures and some of them showed high bioaccumulation in the M media containing about 100 mg l⁻¹ chromium(VI) and 4% NaCl. The strain 8 (99.3%) and 10 (99.1%) were able to bioaccumulate more efficient than the mixed culture (98.9%) in this media. But the highest specific Cr uptake was obtained by the mixed cultures followed by strain 8 and 10 with 56.71, 33.14 and 21.7 mg g⁻¹, respectively. Bioaccumulation of chromium(VI) ions by the strain 8 growing in the media with chromium(VI) and NaCl was studied in a batch system as a function of initial chromium(VI) (86.6–547.6 mg l⁻¹) and NaCl (0, 2, 4, 6% w/v) concentrations. During all the experiments, the uptake yield of the strain 8 was highly affected from NaCl concentrations in the medium at high initial chromium(VI) concentrations. But at low chromium(VI) concentration, strain 8 was not affected from NaCl concentrations in the medium. The maximum uptake yield were obtained in the M media with 2% NaCl as 98.8% for 110.0 mg l⁻¹, 98.6% for 217.1 mg l⁻¹, 98.6% for 381.7 mg l⁻¹ and 98.2% for 547.6 mg l⁻¹ initial chromium(VI) concentrations. The strain 8 tolerated a 6% (w/v) NaCl concentration was able to bioaccumulate more than 95% of the applied chromium(VI) at the 97.6–224.4 mg l⁻¹ initial chromium(VI) concentrations. The results presented in this paper was shown that these pure and mixed cultures might be of use for the bioaccumulation of chromium(VI) from saline wastewater.     

Investigation of switch from ATM to ATR signaling at the sites of DNA damage induced by low and high LET radiation

Upon induction of DNA damage by ionizing radiation (IR), members of the phosphatidylinositol 3-kinase-like kinase family of proteins namely ataxia-telangiectasia mutated (ATM), DNA-PKcs, and ATM- and Rad3-related (ATR) maintain genomic integrity by mounting DNA damage response (DDR). Recent reports suggest that activation of ATM and ATR are oppositely regulated by the length of single stranded overhangs generated during end processing by nucleases at the break sites. These stretches of single stranded overhangs hold the clue for the transition from ATM to ATR signaling at broken DNA ends. We investigated whether differential processing of breaks induced by low and high LET radiation augments the phenomenon of switching from ATM to ATR kinase and hence a concomitant NHEJ to HR transition at the sites of DNA damage. 82-6 human fibroblasts were irradiated with 1 or 2 Gy of γ-rays and particle radiation of increasing LET in order to increase the complexity and variability of DNA double strand breaks (DSB) structures. The activation kinetics of ATM and ATR kinases along with their downstream substrates were determined utilizing Western blotting and immunofluorescence techniques. Our data provide evidence of a potential switch from ATM to ATR kinase signaling in cells treated with γ-rays at approximately 2 h post irradiation, with induction and completion of resection denoted by Rad51 foci resolution kinetics and observed with a significant decline of phosphorylated ATR kinase 8 h after IR. On the other hand, irradiation with high LET 600 MeV/u ⁵⁶Fe (180 keV/μm) and 170 MeV/u ²⁸Si (99 keV/μm) particles show a similar Rad51 foci decay kinetics, however, exhibiting prolonged resection, evident by the persistent phosphorylated ATM and ATR kinase until 24 h post irradiation. This residual effect, however, was significantly reduced for 250 MeV/u ¹⁶O particles of moderate LET (25 keV/μm) and absent for γ-rays. Hence, our results support the hypothesis that the transition from ATM to ATR signaling at DNA break sites is extended for longer periods of time, indicated by sustained resection due to the complex type of damage induced, a hallmark of high LET radiation, which may contribute to its increased biological effectiveness.     

Surface modification of iron oxide nanoparticles with polyarginine as a highly positively charged magnetic nano-adsorbent for fast and effective recovery of acid proteins

Polyarginine has been successfully bound onto iron oxide nanoparticles via carbodiimide activation as a highly positively charged magnetic nano-adsorbent for protein separation. They were nearly superparamagnetic with a mean diameter of 10.3 ± 2.36 nm, and the binding process did not change the spinel structure of iron oxide. From the analyses of FTIR spectra and zeta potential, the binding of polyarginine on the surface of iron oxide was confirmed and the resultant polyarginine-coated magnetic nanoparticles (PA-MNPs) were positively charged even up to pH 11. By thermogravimetric analysis, the typical product contained about 7.1 wt% of polyarginine. From the adsorption of the proteins with different pI values, the resultant PA-MNPs were found to be quite efficient for the fast and effective adsorption of acid proteins. For the typical acid protein, bovine serum albumin (BSA), the adsorption equilibrium was achieved within few minutes and obeyed the Langmuir isotherm equation. At pH 7 and 25 °C, the maximum adsorption capacity and equilibrium constant were 67.6 mg/g and 0.0623 L/mg, respectively. Moreover, by SDS–polyacrylamide gel electrophoresis, the capability of PA-MNPs for the separation of BSA-lysozyme mixture and egg white was further confirmed. Accordingly, the PA-MNPs were useful for the fast and effective magnetic recovery of acid proteins.     

Synthesis,crystal structures,DNA binding and cytotoxicity of two novel platinum(II) complexes containing 2-(hydroxymethyl)pyridine and pyridine-2-carboxylate ligands

Two new platinum(II) complexes, trans-[Pt(2-mpy)₂]·4H₂O (1) and [PtCl(2-pyc)(2-hmpy)]·H₂O (2), where 2-hmpy = 2-(hydroxymethyl)pyridine, 2-mpy = deprotonated 2-hmpy and 2-pyc = pyridine-2-carboxylate, have been synthesized and characterized by elemental analysis, IR, NMR, and X-ray crystallography. The DNA binding affinities of these complexes for Fish Sperm DNA (FS-DNA) were investigated using fluorescence, viscosity, thermal denaturation and gel electrophoresis measurements. Fluorescence analysis indicates that complex 1 binds to DNA by a single intercalative mechanism, while complex 2 exhibits two types of interactions such as intercalation and covalent binding. Gel electrophoresis assay demonstrates ability of the complexes to cleavage the supercoiled pBR322 plasmid DNA. The in vitro cytotoxicities of both complexes were preliminarily evaluated and the cytotoxicity of complex 1 against the human lung cancer cells (H1299) is similar to oxaliplatin, but higher than transplatin and carboplatin.     

Structure–activity relationships of truncated adenosine derivatives as highly potent and selective human A3 adenosine receptor antagonists

On the basis of potent and selective binding affinity of truncated 4′-thioadenosine derivatives at the human A₃ adenosine receptor (AR), their bioisosteric 4′-oxo derivatives were designed and synthesized from commercially available 2,3-O-isopropylidene-d-erythrono lactone. The derivatives tested in AR binding assays were substituted at the C2 and N⁶ positions. All synthesized nucleosides exhibited potent and selective binding affinity at the human A₃ AR. They were less potent than the corresponding 4′-thio analogues, but showed still selective to other subtypes. The 2-Cl series generally were better than the 2-H series in view of binding affinity and selectivity. Among compounds tested, compound 5d (X = Cl, R = 3-bromobenzyl) showed the highest binding affinity (K_i = 13.0 ± 6.9 nM) at the hA₃ AR with high selectivity (at least 88-fold) in comparison to other AR subtypes. Like the corresponding truncated 4′-thio series, compound 5d antagonized the action of an agonist to inhibit forskolin-stimulated adenylate cyclase in hA₃ AR-expressing CHO cells. Although the 4′-oxo series were less potent than the 4′-thio series, this class of human A₃ AR antagonists is also regarded as another good template for the design of A₃ AR antagonists and for further drug development.     

The harnessing of peptide–monolith constructs for single step plasmid DNA purification

The availability of synthetic peptides has paved the way for their use in tailor-made interactions with biomolecules. In this study, a 16mer LacI-based peptide was used as an affinity ligand to examine the scale up feasibility for plasmid DNA purification. First, the peptide was designed and characterized for the affinity purification of lacO containing plasmid DNA, to be employed as a high affinity ligand for the potential capturing of plasmid DNA in a single unit operation. It was found there were no discernible interactions with a control plasmid that did not encode the lacO nucleotide sequence. The dissociation equilibrium constant of the binding between the 16mer peptide and target pUC19 was 5.0 ± 0.5 × 10⁻⁸ M as assessed by surface plasmon resonance. This selectivity and moderated affinity indicate that the 16mer is suitable for the adsorption and chromatographic purification of plasmid DNA. The suitability of this peptide was then evaluated using a chromatography system with the 16mer peptide immobilized to a customized monolith to purify plasmid DNA, obtaining preferential purification of supercoiled pUC19. The results demonstrate the applicability of peptide–monolith supports to scale up the purification process for plasmid DNA using designed ligands via a biomimetic approach.     

Design,synthesis, and DNA binding characteristics of a group of orthogonally positioned diamino,N-formamido,pyrrole- and imidazole-containing polyamides

Orthogonally positioned diamino/dicationic polyamides (PAs) have good water solubility and enhanced binding affinity, whilst retaining DNA minor groove and sequence specificity compared to their monoamino/monocationic counterparts. The synthesis and DNA binding properties of the following diamino PAs: f-IPI (3a), f-IPP (4), f-PIP (5), and f-PPP (6) are described. P denotes the site where a 1-propylamino group is attached to the N1-position of the heterocycle. Binding of the diamino PAs to DNA was assessed by DNase I footprinting, thermal denaturation, circular dichroism titration, biosensor surface plasmon resonance (SPR), and isothermal titration calorimetry (ITC) studies. According to SPR studies, f-IPI (3a) bound more strongly (K_eq = 2.4 × 10⁸ M^?1) and with comparable sequence selectivity to its cognate sequence 5′-ACGCGT-3′ when compared to its monoamino analog f-IPI (1). The binding of f-IPI (3a) to 5′-ACGCGT-3′ via the stacked dimer motif was balanced between enthalpy and entropy, and that was quite different from the enthalpy-driven binding of its monoamino parent f-IPI (1). f-IPP (4) also bound more strongly to its cognate sequence 5′-ATGCAT-3′ (K_eq = 7.4 × 10⁶ M^?1) via the side-by-side stacked motif than its monoamino analog f-IPP (2a). Although f-PPP (6) bound via a 1:1 motif, it bound strongly to its cognate sequence 5′-AAATTT-3′ (K_eq = 4.8 × 10⁷ M^?1), 15-times higher than the binding of its monoamino analog f-PPP (2c), albeit f-PPP bound via the stacked motif. Finally, f-PIP (5) bound to its target sequence 5′-ATCGAT-3′ as a stacked dimer and it has the lowest affinity among the diamino PAs tested (K_eq <1 × 10⁵ M^?1). This was about two times lower in affinity than the binding of its monoamino analog f-PIP (2b). The results further demonstrated that the ‘core rules’ of DNA recognition by monoamino PAs also apply to their diamino analogs. Specifically, PAs that contain a stacked IP core structure bind most strongly (highest binding constants) to their cognate GC doublet, followed by the binding of PAs with a stacked PP structure to two degenerate AT base pairs, and finally the binding of PAs with a PI core to their cognate CG doublet.     

Effect of methyl substitution in a ligand on the selectivity and binding affinity for a nucleobase: A case study with isoxanthopterin and its derivatives

Isoxanthopterin (IX) has two edges with hydrogen bond-forming sites suitable for binding to thymine (T) and cytosine (C). The binding affinity of IX for T or C is stronger than for adenine (A) and guanine (G), whereas the base selectivity of IX for T over C (and vice versa) is moderate. In order to improve both the binding affinity and base selectivity for T over C or C over T, a methyl group is introduced respectively at the N-3 or N-8 position of IX. This leads to the known ligands 3-methyl isoxanthopterin (3-MIX) and 8-methyl isoxanthopterin (8-MIX), and the binding affinity for C or T is expected to be tuned and improved by methyl substitution. Indeed, 3-MIX selectively binds to T more strongly than IX with a binding constant of 1.5 × 10⁶ M^?1 and it loses its binding affinity for C. In contrast, 8-MIX selectively binds to C over T with a binding constant of 1.0 × 10⁶ M^?1 and the binding affinity is greatly improved compared to the parent ligand IX. The thermodynamics of the ligand–nucleotide interaction is analyzed by isothermal calorimetric titrations, and the results show that the interaction follows a 1:1 stoichiometry and is enthalpy-driven. The introduction of methyl groups at both N-3 and N-8 positions results in an increase in enthalpy of the ligand–nucleotide interaction, which leads to the improved binding affinity.     

Human growth hormone-specific aptamer identification using improved oligonucleotide ligand evolution method

LETEG is a method developed and used for the separation and purification of proteins employing a single-step ligand (aptamers) evolution in which aptamers are eluted with an increasing temperature gradient. Using recombinant human growth hormone (rhGH) as the test purification target, and after avoiding cross reactions of aptamers with Bacillus subtilis extracellular proteins by negative SELEX, the effects of time and pH on aptamer binding to rhGH were investigated. The highest binding efficiency of aptamers on rhGH-immobilized microparticles was obtained at pH 7.0. The aptamers that interacted with rhGH were eluted by a multi-stage step-up temperature gradient in ΔT = 10 °C increments within the range T = 55–95 °C; and the strongest affinity binding was disrupted at T = 85 °C where C_Apt = 0.16 μM was eluted. The equilibrium binding data obtained was described by a Langmuir-type isotherm; where the affinity constant was K_D = 218 nM rhGH. RhGH was separated from the fermentation broth with 99.8% purity, indicating that the method developed is properly applicable even for an anionic protein.     

Kappa-opioid receptor-selective dicarboxylic ester-derived salvinorin A ligands

Salvinorin A, the active ingredient of the hallucinogenic plant Salvia divinorum is the most potent known naturally occurring hallucinogen and is a selective κ-opioid receptor agonist. To better understand the ligand–receptor interactions, a series of dicarboxylic ester-type of salvinorin A derivatives were synthesized and evaluated for their binding affinity at κ-, δ- and μ-opioid receptors. Most of the analogues show high affinity to the κ-opioid receptor. Methyl malonyl derivative 4 shows the highest binding affinity (K_i = 2 nM), analogues 5, 7, and 14 exhibit significant affinity for the κ-receptor (K_i = 21, 36 and 39 nM).     

Cytotoxicity and DNA binding property of triphenylethylene–coumarin hybrids with two amino side chains

Novel triphenylethylene–coumarin hybrids containing two amino side chains were designed and synthesized. Some of these 3,4-diphenyl coumarins, 7b–c (the double chains at 4-position on 3-,4-phenyl, respectively), and 13b–f (the double chains at 4-position on 3-phenyl and 7-position, respectively), showed a broad-spectrum and good anti-proliferative activity against five tumor cells and low cytotoxicity in osteoblast. UV–vis, fluorescence, and circular dichroism (CD) spectroscopies and thermal denaturation exhibited that compounds 7b (R = piperidinyl), 7e (R = NEt₂), and 7f (R = 4-methylpiperazinyl) had significant interactions with Ct-DNA by the intercalative mode of binding. Structure activity relationships (SARs) analysis suggested that the location of the two amino alkyl chains would play an important role both in the compounds against tumor cells proliferation and their interactions with DNA.     

Frontal analysis of cell-membrane chromatography for determination of drug-α1D adrenergic receptor affinity

The aim of the present study was to determine drug-α_1D adrenergic receptor (AR) affinity by frontal analysis of cell-membrane chromatography (CMC). The cell-membrane stationary phase (CMSP) was prepared by immobilizing rat aorta cell membranes on porous silica, and the resulting CMSP was used to determine drug binding affinity to α_1D-AR by frontal analysis. The CMSP of rat aorta was stable and reproducible. Relative binding affinities (dissociation constant, K_d) were determined by frontal chromatography for prazosin (166.13 ± 18.36 nmol), BMY7378 (537.40 ± 30.84 nmol), phentolamine (646.92 ± 23.17 nmol), 5-methylurapidil (725.66 ± 25.48 nmol), oxymetazoline (910.56 ± 40.62 nmol) and methoxamine (1299.27 ± 51.73 nmol). These results were consistent with the affinity rank order and showed a good correlation with the affinity of the same compounds for the cloned α_1D-AR subtype obtained from radioligand-binding assay. The study demonstrates that frontal analysis of CMC may be used for direct determination of drug–receptor binding interactions, and that CMC is an alternative reliable method to quantitatively study ligand–receptor interactions.     

The Primary and Secondary Translocase Activities within E. coli RecBC Helicase Are Tightly Coupled to ATP Hydrolysis by the RecB Motor

Escherichia coli RecBC, a rapid and processive DNA helicase with only a single ATPase motor (RecB), possesses two distinct single‐stranded DNA (ssDNA) translocase activities that can operate on each strand of an unwound duplex DNA. Using a transient kinetic assay to detect phosphate release, we show that RecBC hydrolyzes the same amount of ATP when translocating along ssDNA using only its primary translocase (0.81 ± 0.05 ATP/nt), only its secondary translocase (1.12 ± 0.06 ATP/nt), or both translocases simultaneously (1.07 ± 0.09 ATP/nt). A mutation within RecB (Y803H) that slows the primary translocation rate of RecBC also slows the secondary translocation rate to the same extent. These results indicate that the ATPase activity of the single RecB motor drives both the primary and secondary RecBC translocases in a tightly coupled reaction. We further show that RecBC also hydrolyzes the same amount of ATP (0.95 ± 0.08 ATP/bp) while processively unwinding duplex DNA, suggesting that the large majority, possibly all, of the ATP hydrolyzed by RecBC during DNA unwinding is used to fuel ssDNA translocation rather than to facilitate base pair melting. A model for DNA unwinding is proposed based on these observations.     

DNA binding acridine–thiazolidinone agents affecting intracellular glutathione

Three new acridine–thiazolidinone derivatives (2a–2c) have been synthesized and their interactions with calf thymus DNA and a number of cell lines (leukemic cells HL-60 and L1210 and human epithelial ovarian cancer cell lines A2780) were studied. The compounds 2a–2c possessed high affinity to calf thymus DNA and their binding constants determined by spectrofluorimetry were in the range of 1.37 × 10⁶–5.89 × 10⁶ M^?1. All of the tested derivatives displayed strong cytotoxic activity in vitro, the highest activity in cytotoxic tests was found for 2c with IC₅₀ = 1.3 ± 0.2 μM (HL-60), 3.1 ± 0.4 μM (L1210), and 7.7 ± 0.5 μM (A2780) after 72 h incubation. The cancer cells accumulated acridine derivatives very fast and the changes of the glutathione level were confirmed. The compounds inhibited proliferation of the cells and induced an arrest of the cell cycle and cell death. Their influence upon cells was associated with their reactivity towards thiols and DNA binding activity.