Assembly of graphene oxide‐formate dehydrogenase composites by nickel‐coordination with enhanced stability and reusability

Featuring unique planar structure, large surface area and biocompatibility, graphene oxide (GO) has been widely taken as an ideal scaffold for the immobilization of various enzymes. In this regard, nickel‐coordinated graphene oxide composites (GO‐Ni) were prepared as novel supporters for the immobilization of formate dehydrogenase. The catalytic activity, stability and morphology were studied. Compared with GO, the enzyme loading capacity of GO‐Ni was enhanced by 5.2‐fold, besides the immobilized enzyme GO‐Ni‐FDH exhibited better thermostability, storage stability and reuse stability than GO‐FDH. GO‐Ni‐FDH retained 40.9% of its initial activity after 3 h at 60°C, and retained 31.4% of its initial relative activity after 20 days’ storage at 4°C. After eight times usages, GO‐Ni‐FDH maintained 63.8% of its initial activity. Mechanism insights of the multiple interactions of enzyme with the GO‐Ni were studied, considering coordination bonds, hydrogen bonds, electrostatic forces, coordination bonds, and etc. A practical and simple immobilization strategy by metal ions coordination for multimeric dehydrogenase was developed.     

Comparative sensitivity of the luminescent <Emphasis Type="Italic">Photobacterium phosphoreum,Escherichia coli</Emphasis>, and <Emphasis Type="Italic">Bacillus subtilis</Emphasis> strains to toxic effects of carbon-based nanomaterials and metal nanoparticles

A comparative analysis of the four commercially available and laboratory luminescent sensor strains to the toxic effect of 10 carbon-based nanomaterials (CBNs) and 10 metal nanoparticles (MNPs) was carried out in this study. The bioluminescence inhibition assays with marine Photobacterium phosphoreum and recombinant Escherichia coli strains were varied in minimal toxic concentrations and EC₅₀ values but led to well-correlated biotoxicity evaluation for the most active compounds, which were ranked as Cu > (MgO, CuO) > (fullerenol, graphene oxide). The novel sensor strain Bacillus subtilis EG168-1 exhibited the highest sensitivity to CBNs and MNPs, which increased significantly the number of toxic compounds causing the bacterial bioluminescence inhibition effect.     

Graphene oxide-methylene blue nanocomposite in photodynamic therapy of human breast cancer

The interaction of methylene blue (MB) as a photosensitizer with graphene oxide nano-sheets (GO) was examined in aqueous solution using UV-vis spectrophotometric techniques. MB–GO composites were prepared by mixing the solutions of GO nano-sheets and methylene blue due to interacting of the cationic methylene blue photosensitizer via electrostatic and π–π stacking or hydrophobic cooperative interactions. The cell killing potential of nanocomposite was examined on the MDA-MB-231 breast cancer cells in the absence and presence of red LED irradiation. The results demonstrated that the MB-GO nanocomposite has good performance in photodynamic therapy (PDT) during red LED irradiation. The cytotoxicity of nanocomposite caused reducing cell viability up to 20%. These effects would be due to the nano size structure of composite that could lead to effective cellular penetration. Also the significant difference has seen in lower concentrations of MB and MB-GO nanocomposite. The results show more than 40% increases in cell killing potential in lower concentrations of nanocomposite by using 2.5 μg/mL of each compound. The ratio of GO/MB can affect the interaction and higher ratios of graphene oxide (GO/MB > 1) can induce dimerization of MB. In lower concentrations and ratios of (GO/MB < 1) the free MB concentration increases and the electron shuttling effect of GO in photo activity decreases – which could affect the photocatalytic yield in PDT. The cell viability measurements confirm these effects on cancer cell killing potential of nanocomposite. According to microscopic and PDT assay results, the nanocomposite distribution and diffusion in cells enhanced the photochemical reaction yield in photodynamic therapy of MDA-MB-231 breast cancer cell line.     

Electrochemically Synthesized Polypyrrole/Graphene Composite Film for Lithium Batteries

A polypyrrole/reduced graphene oxide (PPy/r‐GO) composite film is prepared by inducing electrochemical reduction of graphene oxide incorporated into PPy as the dopant. This film has a wrinkled surface morphology with a porous structure as revealed by scanning electron microscopy. Its porous structure is attributed to the physical nature of the GO sheets, providing a templating effect during PPy deposition. This PPy/r‐GO composite is characterized using in‐situ UV–visible spectroelectrochemistry as well as Raman and Fourier‐transform IR spectroscopy. The PPy/r‐GO material shows greatly improved electrochemical properties, i.e., a high rate capability and excellent cycling stability when used as a cathode material in a lithium ion battery. It also delivers a large reversible capacity when used as an anode material, and this is mainly attributed to the reduced graphene oxide (r‐GO) component.     

Exploration of the Effective Location of Surface Oxygen Defects in Graphene‐Based Electrocatalysts for All‐Vanadium Redox‐Flow Batteries

Oxygen functional groups play a key role in vanadium redox reactions. To identify the effective location of oxygen functionalities in graphene‐based nanomaterials, a selectively edge‐functionalized graphene nanoplatelet (E‐GnP) with a crystalline basal plane is produced by a ball‐milling process in the presence of dry ice. For comparison, the reduced graphene oxide (rGO) that contains defects at both edges and in the basal plane is produced by a modified Hummers' method. The location of defects in the graphene‐based nanomaterials significantly affects the electrocatalytic activity towards vanadium redox couples (V²⁺/V³⁺ and VO²⁺/VO₂ ⁺). The improved activity of these nanoplatelets lies in the presence of oxygen defects at the edge sites and higher crystallinity of basal planes than in rGO. This effective location of oxygen defects facilitates fast electron‐transfer and mass‐transport processes.     

Molecular interactions of MnO2@RGO (manganese dioxide-reduced graphene oxide) nanocomposites with bovine serum albumin

Abstract

Graphene based materials have attracted global attention due to their excellent properties. GO-metal oxide nanocomposites have been conjugated with biomolecules for the development of novel materials and potentially used as biomarkers. Herein, a detailed study on the interaction of Bovine serum albumin (BSA) with MnO₂@RGO (manganese dioxide-reduced graphene oxide) nanocomposites (NC) has been carried out. MnO₂@RGO nanocomposites were prepared through a template/surfactant free hydrothermal route at 180?°C for 12?h by varying the graphene oxide (GO) concentration. Different biophysical experiments have been carried out to evaluate molecular interactions between BSA and NCs. Intrinsic fluorescence has been used to quantify the quenching efficiency of NCs and the binding association of BSA-NC complexes. NCs effectively quenched the intrinsic fluorescence of BSA via static and dynamic mechanism. Further, the results indicate that the molecular interactions of NC with BSA are dependent on the GO percentage in NC. Circular dichroism results demonstrate nominal changes in the secondary structure of BSA in presence of NCs. Also, the esterase-like activity of BSA was marginally affected after adsorption upon NCs. In addition, the FESEM micrographs reveal that the protein-NC complexes consist of nanorod and sheet-like morphologies are forming aggregates of different sizes. We hope that this study will provide a basis for the design of novel graphene based and other related nanomaterials for several biological applications.

Communicated by Ramaswamy H. Sarma     

Recent advances in nano-carrier immobilized enzymes and their applications

Enzymes have been widely used because of their catalytic properties, and immobilization is a promising technique to improve their catalytic activity and stability. Due to their large specific surface areas, exceptional chemical, mechanical, thermal and cost effective characteristics, nanomaterials should be ideal carriers for the immobilization of enzymes. Enzymes immobilized on nano-carriers are more robust and stable, and can be recycled and reused. This review focuses on the nanomaterial immobilized enzymes and their applications. The introduction addresses the advantages of immobilized enzymes and the features of enzyme immobilization nanocarriers. The next section covers carbonaceous nanomaterials used in enzymes immobilization, with subsections on carbon nanotube, graphene, graphene oxide and reduced graphene oxide. The third section treats metallic nanomaterials for enzymes immobilization, with subsections on metal (gold), metal oxide (titanium dioxide, zinc oxide) and metal hydroxide (layered double hydroxide) nanomaterials. Then, the next section summarizes the applications of nanomaterial immobilized enzymes. A concluding section discusses the challenges and prospects of nanomaterial immobilized enzymes.     

Obstruction of Photoinduced Electron Transfer from Excited Porphyrin to Graphene Oxide: A Fluorescence Turn-On Sensing Platform for Iron (III) Ions

A comparative reaserch of the assembly of different porphyrin molecules on graphene oxide (GO) and reduced graphene oxide (RGO) was carried out, respectively. Despite the cationic porphyrin molecules can be assembled onto the surfaces of graphene sheets, including GO and RGO, to form complexes through electrostatic and π-π stacking interactions, the more obvious fluorescence quenching and the larger red-shift of the Soret band of porphyrin molecule in RGO-bound states were observed than those in GO-bound states, due to the differenc of molecular flattening in degree. Further, more interesting finding was that the complexes formed between cationic porphyrin and GO, rather than RGO sheets, can facilitate the incorporation of iron (III) ions into the porphyrin moieties, due to the presence of the oxygen-contained groups at the basal plane of GO sheets served as auxiliary coordination units, which can high-efficiently obstruct the electron transfer from excited porphyrin to GO sheets and result in the occurrence of fluorescence restoration. Thus, a fluorescence sensing platform has been developed for iron (III) ions detection in this contribution by using the porphyrin/GO nanohybrids as an optical probe, and our present one exhibited rapid and sensitive responses and high selectivity toward iron (III) ions.     

A new helicase assay based on graphene oxide for anti-viral drug development

Recently, graphene oxide (GO), one of the carbon nanomaterials, has received much attention due to its unique physical and chemical properties and high potential in many research areas, including applications as a biosensor and drug delivery vehicle. Various GO-based biosensors have been developed, largely based on its surface adsorption properties for detecting biomolecules, such as nucleotides and peptides, and real-time monitoring of enzymatic reactions. In this review, we discuss recent advances in GO-based biosensors focusing on a novel assay platform for helicase activity, which was also employed in high-throughput screening to discover selective helicase inhibitors.     

Self-Assembly and Headgroup Effect in Nanostructured Organogels via Cationic Amphiphile-Graphene Oxide Composites

Self-assembly of hierarchical graphene oxide (GO)-based nanomaterials with novel functions has received a great deal of attentions. In this study, nanostructured organogels based on cationic amphiphile-GO composites were prepared. The gelation behaviors of amphiphile-GO composites in organic solvents can be regulated by changing the headgroups of amphiphiles. Ammonium substituted headgroup in molecular structures in present self-assembled composites is more favorable for the gelation in comparison to pyridinium headgroup. A possible mechanism for headgroup effects on self-assembly and as-prepared nanostructures is proposed. It is believed that the present amphiphile-GO self-assembled system will provide an alternative platform for the design of new GO nanomaterials and soft matters.     

Immobilization of formate dehydrogenase on polyethylenimine‐grafted graphene oxide with kinetics and stability study

Graphene oxide‐based nanomaterials are promising for enzyme immobilization due to the possibilities of functionalizing surface. Polyethylenimine‐grafted graphene oxide was constructed as a novel scaffold for immobilization of formate dehydrogenase. Compared with free formate dehydrogenase and graphene oxide adsorbed formate dehydrogenase, thermostability, storage stability, and reusability of polyethylenimine‐grafted graphene oxide‐formate dehydrogenase were enhanced. Typically, polyethylenimine‐grafted graphene oxide‐formate dehydrogenase remained 47.4% activity after eight times’ repeat reaction. The immobilized capacity of the polyethylenimine‐grafted graphene oxide was 2.4‐folds of that of graphene oxide. Morphological and functional analysis of polyethylenimine‐grafted graphene oxide‐formate dehydrogenase was performed and the assembling mechanism based on multi‐level interactions was studied. Consequently, this practical and facile strategy will likely find applications in biosynthesis, biosensing, and biomedical engineering.     

Bio-functionalized graphene-graphene oxide nanocomposite based electrochemical immunosensing

We report a novel in-situ electrochemical synthesis approach for the formation of functionalized graphene-graphene oxide (fG-GO) nanocomposite on screen-printed electrodes (SPE). Electrochemically controlled nanocomposite film formation was studied by transmission electron microscopy (TEM) and Raman spectroscopy. Further insight into the nanocomposite has been accomplished by the Fourier transformed infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and X-ray diffraction (XRD) spectroscopy. Configured as a highly responsive screen-printed immunosensor, the fG-GO nanocomposite on SPE exhibits electrical and chemical synergies of the nano-hybrid functional construct by combining good electronic properties of functionalized graphene (fG) and the facile chemical functionality of graphene oxide (GO) for compatible bio-interface development using specific anti-diuron antibody. The enhanced electrical properties of nanocomposite biofilm demonstrated a significant increase in electrochemical signal response in a competitive inhibition immunoassay format for diuron detection, promising its potential applicability for ultra-sensitive detection of range of target analytes.     

Peroxidase activity and structural transitions of cytochrome c bound to cardiolipin-containing membranes

During apoptosis, cytochrome c (cyt c) is released from intermembrane space of mitochondria into the cytosol where it triggers the caspase-dependent machinery. We discovered that cyt c plays another critical role in early apoptosis as a cardiolipin (CL)-specific oxygenase to produce CL hydroperoxides required for release of pro-apoptotic factors [Kagan, V. E., et al. (2005) Nat. Chem. Biol. 1, 223-232]. We quantitatively characterized the activation of peroxidase activity of cyt c by CL and hydrogen peroxide. At low ionic strength and high CL/cyt c ratios, peroxidase activity of the CL/cyt c complex was increased >50 times. This catalytic activity correlated with partial unfolding of cyt c monitored by Trp(59) fluorescence and absorbance at 695 nm (Fe-S(Met(80)) band). The peroxidase activity increase preceded the loss of protein tertiary structure. Monounsaturated tetraoleoyl-CL (TOCL) induced peroxidase activity and unfolding of cyt c more effectively than saturated tetramyristoyl-CL (TMCL). TOCL/cyt c complex was found more resistant to dissociation by high salt concentration. These findings suggest that electrostatic CL/cyt c interactions are central to the initiation of the peroxidase activity, while hydrophobic interactions are involved when cyt c's tertiary structure is lost. In the presence of CL, cyt c peroxidase activity is activated at lower H(2)O(2) concentrations than for isolated cyt c molecules. This suggests that redistribution of CL in the mitochondrial membranes combined with increased production of H(2)O(2) can switch on the peroxidase activity of cyt c and CL oxidation in mitochondria-a required step in execution of apoptosis.     

pH-responsive, DNA-directed reversible assembly of graphene oxide

Both graphene oxide (GO) and DNA can be used as building blocks for nano/micro devices or hybrid structures. Reversible assembly of these nanomaterials is highly desirable because of their promising applications in chemical sensors, energy storage, catalysis, and optoelectronic applications. However, reversible assembly of GO-DNA hybrid materials has not been achieved based on specific DNA hybridization and conformational transition. Here we report a general pH-responsive, DNA-directed assay for the design of a reversible assembly of GO-GO and GO-AuNPs hybrid using human telomeric G-quadruplex and i-motif DNA.     

The hierarchy of structural transitions induced in cytochrome c by anionic phospholipids determines its peroxidase activation and selective peroxidation during apoptosis in cells

Activation of peroxidase catalytic function of cytochrome c (cyt c) by anionic lipids is associated with destabilization of its tertiary structure. We studied effects of several anionic phospholipids on the protein structure by monitoring (1) Trp59 fluorescence, (2) Fe-S(Met80) absorbance at 695 nm, and (3) EPR of heme nitrosylation. Peroxidase activity was probed using several substrates and protein-derived radicals. Peroxidase activation of cyt c did not require complete protein unfolding or breakage of the Fe-S(Met80) bond. The activation energy of cyt c peroxidase changed in parallel with stability energies of structural regions of the protein probed spectroscopically. Cardiolipin (CL) and phosphatidic acid (PA) were most effective in inducing cyt c peroxidase activity. Phosphatidylserine (PS) and phosphatidylinositol bisphosphate (PIP2) displayed a significant but much weaker capacity to destabilize the protein and induce peroxidase activity. Phosphatidylinositol trisphosphate (PIP3) appeared to be a stronger inducer of cyt c structural changes than PIP2, indicating a role for the negatively charged extra phosphate group. Comparison of cyt c-deficient HeLa cells and mouse embryonic cells with those expressing a full complement of cyt c demonstrated the involvement of cyt c peroxidase activity in selective catalysis of peroxidation of CL, PS, and PI, which corresponded to the potency of these lipids in inducing cyt c's structural destabilization.     

Protein oxidation of cytochrome C by reactive halogen species enhances its peroxidase activity

Reactive halogen species (RHS; X(2) and HOX, where X represents Cl, Br, or I) are metabolites mediated by neutrophil activation and its accompanying respiratory burst. We have investigated the interaction between RHS and mitochondrial cytochrome c (cyt c) by using electrospray mass spectrometry and electron spin resonance (ESR). When the purified cyt c was reacted with an excess amount of hypochlorous acid (HOCl) at pH 7.4, the peroxidase activity of cyt c was increased by 4.5-, 6.9-, and 8.6-fold at molar ratios (HOCl/cyt c) of 2, 4, and 8, respectively. In comparison with native cyt c, the mass spectra obtained from the HOCl-treated cyt c revealed that oxygen is covalently incorporated into the protein as indicated by molecular ions of m/z = 12,360 (cyt c), 12,376 (cyt c + O), and 12,392 (cyt c + 2O). Using tandem mass spectrometry, a peptide (obtained from the tryptic digests of HOCl-treated cyt c) corresponding to the amino acid sequence MIFAGIK, which contains the methionine that binds to the heme, was identified to be involved in the oxygen incorporation. The location of the oxygen incorporation was unequivocally determined to be the methionine residue, suggesting that the oxidation of heme ligand (Met-80) by HOCl results in the enhancement of peroxidase activity of cyt c. ESR spectroscopy of HOCl-oxidized cyt c, when reacted with H(2)O(2) in the presence of the nitroso spin trap 2-methyl-2-nitrosopropane (MNP), yielded more immobilized MNP/tyrosyl adduct than native cyt c. In the presence of H(2)O(2), the peroxidase activity of HOCl-oxidized cyt c exhibited an increasing ability to oxidize tyrosine to tyrosyl radical as measured directly by fast flow ESR. Titration of both native cyt c and HOCl-oxidized cyt c with various amounts of H(2)O(2) indicated that the latter has a decreased apparent K(m) for H(2)O(2), implicating that protein oxidation of cyt c increases its accessibility to H(2)O(2). HOCl-oxidized cyt c also displayed an impaired ability to support oxygen consumption by the purified mitochondrial cytochrome c oxidase, suggesting that protein oxidation of cyt c may break the electron transport chain and inhibit energy transduction in mitochondria.     

Improved stability and catalytic activity of graphene oxide/chitosan hybrid beads loaded with porcine liver esterase

Graphene oxide/chitosan and reduced graphene oxide/chitosan (GO/CS and RGO/CS) beads were prepared by precipitation with NaOH. Porcine liver esterase was immobilized on these beads to give GO/CS/E and RGO/CS/E beads. The optimum conditions for the maximum activity of RGO/CS/E beads were pH 8 and 50°C. The stability of the enzyme immobilized on GO/CS/E and RGO/CS/E was high in the pH range of 5–8. The GO/CS/E beads showed superior stability compared to that of the free enzyme and CS/E beads between 20 and 50°C. Kinetic analysis showed that GO/CS/E was a better catalyst than the RGO/CS/E beads with a lower K_m value of 0.9?mM. The hybrid beads also retained more than 95% activity after 10 consecutive cycles. The GO/CS/E and RGO/CS/E beads retained 84% and 87% activity after 40 days at 4°C. The GO/CS/E beads were used for the successful hydrolysis of methyl 4-hydroxy benzoate.     

Formation of electrochemically reduced graphene oxide on melamine electrografted layers and its application toward the determination of methylxanthines

The current study describes the electrografting of 2,4-diamino-1,3,5-triazine (AT) groups at the surfaces of glassy carbon electrode (GCE) and indium tin oxide (ITO) through in situ diazotization of melamine. The presence of AT groups at the surface of the electrode was confirmed by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). Furthermore, graphene oxide (GO) was self-assembled on AT grafted GCE. The oxygen functional groups present on the surface of GO were electrochemically reduced to form an electrochemically reduced graphene oxide (ERGO) on AT grafted electrode surface. Raman spectra show the characteristic D and G bands at 1340 and 1605 cm⁻¹, respectively, which confirms the successful attachment of GO on AT grafted surface, and the ratio of D and G bands was increased after the electrochemical reduction of GO. EIS shows that the electron transfer reaction of [Fe(CN)₆]^3−/4− was higher at the ERGO modified electrode than at bare, AT grafted, and GO modified GCEs. The electrocatalytic activity of ERGO was investigated toward the oxidation of methylxanthines. It shows excellent electrocatalytic activity toward these methylxanthines by not only shifting their oxidation potentials toward less positive potentials but also enhancing their oxidation currents.     

A simple electrochemical approach to fabricate a glucose biosensor based on graphene-glucose oxidase biocomposite

We report a simple electrochemical approach for the immobilization of glucose oxidase (GOx) on reduced graphene oxide (RGO). The immobilization of GOx was achieved in a single step without any cross linking agents or modifiers. A simple solution phase approach was used to prepare exfoliated graphene oxide (GO), followed by electrochemical reduction to get RGO-GOx biocomposite. The direct electrochemistry of GOx was revealed at the RGO-GOx modified glassy carbon electrode (GCE). The electrocatalytic and electroanalytical applications of the proposed film were studied by cyclic voltammetry (CV) and amperometry. It is notable that the glucose determination has been achieved in mediator-free conditions. RGO-GOx film showed very good stability, reproducibility and high selectivity. The developed biosensor exhibits excellent catalytic activity towards glucose over a wide linear range of 0.1-27mM with a sensitivity of 1.85μAmM(-1)cm(-2). The facile and easy electrochemical approach used for the preparation of RGO-GOx may open up new horizons in the production of cost-effective biosensors and biofuel cells.     

Effects of different graphene-based nanomaterials as elicitors on growth and ganoderic acid production by Ganoderma lucidum

Graphene-based nanomaterials (GBNs) have attracted considerable interest nowadays due to their wide range of applications. However, very little attention has been paid to the application of nanomaterials as potential elicitors for production of valuable metabolites. Herein, aiming to earn insight into effects of nanomaterials on secondary metabolite biosynthesis by medicinal fungi, we evaluated the influence of GBNs on growth and production of ganoderic acid (GA) by Ganoderma lucidum in submerged culture. Graphene oxide (GO), reduced graphene oxide (rGO), and rGO/Fe₃O₄ nanocomposite were synthesized successfully and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy analysis. The prepared nanomaterials were added to the culture of G. lucidum at final concentrations of 50, 100, and 150 mg/L on Day 5. The results showed that the elicitation of G. lucidum with GO and rGO decreased the cell dry weight and GA production slightly, especially in higher concentrations. However, rGO/Fe₃O₄ nanocomposite not negatively affected cell growth and improved GA production. G. lucidum growth rate responded to elicitation experiments differently and depended on the type of nanomaterials and their concentrations, but almost all GBNs caused an increase in GA content (mg/100 mg dry weight). Also, field emission scanning electron microscopy morphological study showed that under elicitation, mycelia were more condensed and tightly stacked together. The findings from this study may suggest that GBNs in low concentrations could be applied as elicitors to secondary metabolites production from higher fungus, but further environmental, physiological, and biological studies required.