Regulation of the actin-activated ATPase activity of Acanthamoeba myosin II by copolymerization with phosphorylated and dephosphorylated peptides derived from the carboxyl-terminal end of the heavy chain

Myosin II from Acanthamoeba castellanii is a conventional myosin composed of two heavy chains and two pairs of light chains. The amino-terminal approximately 90 kDa of each heavy chain form a globular head that contains the ATPase site and an ATP-sensitive actin-binding site. The carboxyl-terminal approximately 80 kDa of both heavy chains interact to form a coiled coil, helical rod (through which the molecules self-associate into bipolar filaments) ending in a short nonhelical tailpiece. Phosphorylation of 3 serine residues at the tip of the tail (at positions 11, 16, and 21 from the carboxyl terminus) inactivates the actin-activated Mg2(+)-ATPase activity of myosin II filaments. Previous work had indicated that the activity of each myosin II molecule in a filament reflects the global state of phosphorylation of the filament rather than the phosphorylation state of the molecule itself. We have now purified the approximately 28-kDa carboxyl-terminal region of the heavy chain lacking the last two phosphorylation sites, and we have shown that this peptide copolymerizes with and regulates the actin-activated Mg2(+)-ATPase activities of native dephosphorylated and phosphorylated myosin II. It can be concluded from these studies that the biologically relevant enzymatic activity of myosin II is regulated by a phosphorylation-dependent conformational change in the myosin filaments.     

Cooperative dependence of the actin-activated Mg2+-ATPase activity of Acanthamoeba myosin II on the extent of filament phosphorylation

The actin-activated Mg2+-ATPase of myosin II from Acanthamoeba castellanii is regulated by phosphorylation of 3 serine residues at the tip of the tail of each of its two heavy chains; only dephosphorylated myosin II is active, whereas the phosphorylated and dephosphorylated forms have identical Ca2+-ATPase activities and Mg2+-ATPase activities in the absence of F-actin. We have now chemically modified phosphorylated and dephosphorylated myosin II with N-ethylmaleimide (NEM). The modification occurred principally at a single site within the NH2-terminal 73,000 Da of the globular head of the heavy chain. NEM-myosin II bound to F-actin and formed filaments normally, but the Ca2+- and Mg2+-ATPase activities of phosphorylated and dephosphorylated myosin II and the actin-activated Mg2+-ATPase activity of NEM-dephosphorylated myosin II were inhibited. Only filamentous myosin II has actin-activated Mg2+-ATPase activity. Native phosphorylated myosin II acquired actin-activated Mg2+-ATPase activity when it was co-polymerized with NEM-inactivated dephosphorylated myosin II, and the increase in its activity was cooperatively dependent on the fraction of NEM-dephosphorylated myosin II in the filaments. From this result, we conclude that the specific activity of each molecule within a filament is independent of its own state of phosphorylation, but is highly cooperatively dependent upon the state of phosphorylation of the filament as a whole. This enables the actin-activated Mg2+-ATPase activity of myosin II filaments to respond rapidly and extensively to small changes in the level of their phosphorylation.     

ATPase activities and actin-binding properties of subfragments of Acanthamoeba myosin IA

Previous studies had led to the conclusion that the globular, single-headed myosins IA and IB from Acanthamoeba castellanii contain two actin-binding sites: one associated with the catalytic site and whose binding to F-actin activates the Mg2+-ATPase activity and a second site whose binding results in the cross-linking of actin filaments and makes the actin-activated ATPase activity positively cooperative with respect to myosin I concentration. We have now prepared a 100,000-Da NH2-terminal peptide and a 30,000-Da COOH-terminal peptide by alpha-chymotryptic digestion of the myosin IA heavy chain. The intact 17,000-Da light chain remained associated with the 100,000-Da fragment, which also contained the serine residue that must be phosphorylated for expression of actin-activated ATPase activity by native myosin IA. The 30,000-Da peptide, which contained 34% glycine and 21% proline, bound to F-actin with a KD less than 0.5 microM in the presence or absence of ATP but had no ATPase activity. The 100,000-Da peptide bound to F-actin with KD = 0.4-0.8 microM in the presence of 2 mM MgATP and KD less than 0.01 microM in the absence of MgATP. In contrast to native myosin IA, neither peptide cross-linked actin filaments. The phosphorylated 100,000-Da peptide had actin-activated ATPase activity with the same Vmax as that of native phosphorylated myosin IA but this activity displayed simple, noncooperative hyperbolic dependence on the actin concentration in contrast to the complex cooperative kinetics observed with native myosin IA. These results provide direct experimental evidence for the presence of two actin-binding sites on myosin IA, as was suggested by enzyme kinetic and filament cross-linking data, and also for the previously proposed mechanism by which monomeric myosins I could support contractile activities.     

Localization and topography of antigenic domains within the heavy chain of smooth muscle myosin

We have produced and characterized monoclonal antibodies that label antigenic determinants distributed among three distinct, nonoverlapping peptide domains of the 200-kD heavy chain of avian smooth muscle myosin. Mice were immunized with a partially phosphorylated chymotryptic digest of adult turkey gizzard myosin. Hybridoma antibody specificities were determined by solid-phase indirect radioimmunoassay and immunoreplica techniques. Electron microscopy of rotary-shadowed samples was used to directly visualize the topography of individual [antibody.antigen] complexes. Antibody TGM-1 bound to a 50-kD peptide of subfragment-1 (S-1) previously found to be associated with actin binding and was localized by immunoelectron microscopy to the distal aspect of the myosin head. However, there was no antibody-dependent inhibition of the actin-activated heavy meromyosin ATPase, nor was antibody TGM-1 binding to actin-S-1 complexes inhibited. Antibody TGM-2 detected an epitope of the subfragment-2 (S-2) domain of heavy meromyosin but not the S-2 domain of intact myosin or rod, consistent with recognition of a site exposed by chymotryptic cleavage of the S-2:light meromyosin junction. Localization of TGM-2 to the carboxy-terminus of S-2 was substantiated by immunoelectron microscopy. Antibody TGM-3 recognized an epitope found in the light meromyosin portion of myosin. All three antibodies were specific for avian smooth muscle myosin. Of particular interest is that antibody TGM-1, unlike TGM-3, bound poorly to homogenates of 19-d embryonic smooth muscles. This indicates the expression of different myosin heavy chain epitopes during smooth muscle development.     

A new, smaller actin-activatable myosin subfragment 1 which lacks the 20-kDa, SH1 and SH2 peptide

The actin-dependent ATPase activity of myosin is retained in the separated heads (S1) which contain the NH2-terminal 95-kDa heavy chain fragment and one or two light chains. The S1 heavy chain can be degraded further by limited trypsin treatment into characteristic 25-, 50-, and 20-kDa peptides, in this order from the NH2-terminal end. The 20-kDa peptide contains an actin-binding site and SH1 and SH2, two thiols whose modification dramatically affects ATPase activity. By treating myosin filaments with trypsin at 4 degrees C in the presence of 2 mM MgCl2, we have now obtained preferential cleavage at the 50-20-kDa heavy chain site without any cleavage at the head-rod junction and hinge region in the rod. Incubation of these trypsinized filaments at 37 degrees C in the presence of MgATP released a new S1 fraction which lacked the COOH-terminal 20-kDa heavy chain peptide region. This fraction, termed S1'(75K), has more than 50% of the actin-activated Mg2+-ATPase activity of S1 and the characteristic Ca2+-ATPase and K+-EDTA ATPase activities of myosin. These results show that SH1 and SH2 are not essential for ATPase activity and that binding of actin to the 20-kDa region is not essential for the enhancement of the Mg2+-ATPase activity.     

Supramolecular regulation of the actin-activated ATPase activity of filaments of Acanthamoeba Myosin II

Acanthamoeba myosin II has three phosphorylation sites clustered near the end of the tail of each of its two heavy chains (six phosphorylation sites/molecule). Myosin II has little or no actin-activated ATPase activity when four to six of these sites are phosphorylated. Maximal actin-activated ATPase activity is obtained when all six sites are dephosphorylated. Under assay conditions, both phosphorylated and dephosphorylated myosin II form bipolar filaments. Filaments of dephosphorylated myosin II have larger sedimentation coefficients than filaments of phosphorylated myosin II but this difference does not explain the difference in their actin-activated ATPase activities. Heteropolymers, formed by mixing soluble dephosphorylated and phosphorylated myosins and then diluting the mixture into low ionic strength buffer containing MgCl2, have sedimentation coefficients close to those of the homopolymer of phosphorylated myosin. The actin-activated ATPase activities of heteropolymers are, under most conditions, lower than the equivalent mixtures of homopolymers of dephosphorylated and phosphorylated myosins. It is concluded, therefore, that the phosphorylation of myosin tails regulates the actin-activated ATPase activity of Acanthamoeba myosin II by affecting the myosin filament as a whole rather than specifically affecting the heads of the phosphorylated myosin molecules only.     

Effects of limited tryptic cleavage on the physical and enzymatic properties of myosin II from Acanthamoeba castellanii

Limited digestion of Acanthamoeba myosin II by trypsin selectively cleaved the 185,000-Da heavy chains into a 73,000-Da peptide containing the catalytic and actin-binding sites and a 112,000-Da peptide containing the regulatory phosphorylatable sites. The light chains were unaffected. The proteolytic products remained associated and formed bipolar filaments that were very similar in appearance to filaments of native myosin by negative staining electron microscopy. Filaments of trypsin-cleaved, dephosphorylated myosin, however, had a smaller sedimentation coefficient than filaments of native dephosphorylated myosin. Trypsin-cleaved dephosphorylated myosin retained complete Ca2+-ATPase activity but had no actin-activated ATPase activity under conditions that are optimal for native, dephosphorylated myosin (pH 7.0, 4 mM MgCl2, 30 degrees C or pH 6.4, 1 mM MgCl2, 30 degrees C). Trypsin-cleaved dephosphorylated myosin had higher actin-activated ATPase activity at pH 6.0 and 1 mM MgCl2 than undigested dephosphorylated myosin which is appreciably inhibited under these conditions. Trypsin-cleaved, dephosphorylated myosin inhibited the actin-activated ATPase activity of native, dephosphorylated myosin when both were present in the same co-polymers, when enzymatic activity was assayed at pH 7.0, 4 mM MgCl2, and 30 degrees C, but this inhibition was overcome by raising the MgCl2 to 6 mM. These results provide additional evidence that regulation of acanthamoeba myosin II occurs at the filament level and that, under most conditions of assay, the heavy chains must be intact and the regulatory serines unphosphorylated for actin-activated ATPase activity to be maximally expressed.     

The functional domains of human ventricular myosin light chain 1

The biological functions of the myosin light chain 1 (LC1) have not been clearly elucidated yet. In this work we cloned and expressed N- and C- terminal fragments of human ventricular LC1 (HVLC1) containing amino acid residues 1-98 and 99-195 and two parts, NN and NC of N fragment in GST-fusion forms, respectively. Using GST pull-down assay, the direct binding experiments of LC1 with rat cardiac G-actin, F-actin and thin filaments, as well as rat cardiac myosin heavy chain (RCMHC) have been performed. Furthermore, the recombinant complexes of rat myosin S1 with N- and C-fragments, as well as the whole molecular of HVLC1 were generated. The results suggested that both binding sites of HVLC1 for actin and myosin heavy chain are positioned in its N-terminal fragment, which may contain several actin-binding sites in tandem. The polymerization of G-actin, the tropomyosin and troponin molecules located in the thin filaments do not hinder the binding of N-terminal fragment of HVLC1 with actin and thin filaments in vitro. The recombinant complex of rat cardiac myosin S1 (RCMS1) with N fragment of HVLC1 greatly decreased actin-activated Mg(2+)-ATPase activity for lack of C fragment. We conclude that the N-fragment is the binding domain of human ventricular LC1, whereas the C-fragment serves as a functional domain, which may be more involved in the modulation of the actin-activated ATPase activity of myosin.     

Monoclonal antibodies binding to the tail of Dictyostelium discoideum myosin: their effects on antiparallel and parallel assembly and actin- activated ATPase activity

Eight monoclonal antibodies that bind to specific sites on the tail of Dictyostelium discoideum myosin were tested for their effects on polymerization and ATPase activity. Two antibodies that bind close to the myosin heads inhibited actin activation of the ATPase either partially or completely, without having an effect on polymerization. Two other antibodies bind to sites within the distal portion of the tail that has been shown, by cleavage mapping, to be important for polymerization. One of these antibodies binds close to the sites of heavy chain phosphorylation which is known to regulate both myosin polymerization and actin-activated ATPase activity. Both antibodies showed strong inhibition of polymerization accompanied by complete inhibition of the actin-activated ATPase activity. A unique effect was obtained with an antibody that binds to the end of the myosin tail. This antibody prevented the formation of bipolar filaments. It caused myosin to assemble into unipolar filaments with heads at one end and the antibody molecules at the other. Only at concentrations higher than required for its effect on polymerization did this antibody show substantial inhibition of the actin-activated ATPase. These results indicate that, using a monoclonal antibody as a blocking agent, parallel assembly of myosin can be dissected out from antiparallel association, and that essentially normal actin-activated ATPase activity could be obtained after significant reductions in filament size.     

Filament assembly and regulation of the actin-activated ATPase activity of thymus myosin

The effects of light chain phosphorylation on the actin-activated ATPase activity and filament assembly of calf thymus cytoplasmic myosin were examined under a variety of conditions. When unphosphorylated and phosphorylated thymus myosins were monomeric, their MgATPase activities were not activated or only very slightly activated by actin, but when they were filamentous, their MgATPase activities were stimulated by actin. The phosphorylated myosin remained filamentous at lower Mg2+ concentrations and higher KC1 concentrations than did the unphosphorylated myosin, and the myosin concentration required for filament assembly was lower for phosphorylated myosin than for unphosphorylated myosin. By varying the myosin concentration, it was possible to have under the same assay conditions mostly monomeric myosin or mostly filamentous myosin; under these conditions, the actin-activated ATPase activities of the filamentous myosins were much greater than those of the monomeric myosins. The addition of phosphorylated myosin to unphosphorylated myosin promoted the assembly of unphosphorylated myosin into filaments. These results suggest that phosphorylation may regulate the actomyosin-based motile activities in vertebrate nonmuscle cells by regulating myosin filament assembly.     

Expression in Escherichia coli of a functional Dictyostelium myosin tail fragment

The amino acid sequence of the myosin tail determines the specific manner in which myosin molecules are packed into the myosin filament, but the details of the molecular interactions are not known. Expression of genetically engineered myosin tail fragments would enable a study of the sequences important for myosin filament formation and its regulation. We report here the expression in Escherichia coli of a 1.5- kb fragment of the Dictyostelium myosin heavy chain gene coding for a 58-kD fragment of the myosin tail. The expressed protein (DdLMM-58) was purified to homogeneity from the soluble fraction of E. coli extracts. The expressed protein was found to be functional by the following criteria: (a) it appears in the electron microscope as a 74-nm-long rod, the predicted length for an alpha-helical coiled coil of 500 amino acids; (b) it assembles into filamentous structures that show the typical axial periodicity of 14 nm found in muscle myosin native filaments; (c) its assembly into filaments shows the same ionic strength dependence as Dictyostelium myosin; (d) it serves as a substrate for the Dictyostelium myosin heavy chain kinase which phosphorylates myosin in response to chemotactic signaling; (e) in its phosphorylated form it has the same phosphoamino acids and similar phosphopeptide maps to those of phosphorylated Dictyostelium myosin heavy chain; (f) it competes with myosin for the heavy chain kinase. Thus, all the information required for filament formation and phosphorylation is contained within this expressed protein.     

Phosphorylation of bovine platelet myosin by protein kinase C

Bovine platelet myosin is phosphorylated by protein kinase C at multiple sites. Most of the phosphate is incorporated in the 20,000-dalton light chain although some phosphate is incorporated in the heavy chain. Phosphorylation of the 20,000-dalton light chain of platelet myosin is 10 times faster than the phosphorylation of smooth muscle myosin. Platelet myosin light chain is first phosphorylated at a threonine residue followed by a serine residue. Dominant phosphorylation sites of the 20,000-dalton light chain are estimated as serine-1, serine-2, and threonine-9. Prolonged phosphorylation by protein kinase C resulted in an additional phosphorylation site which, on the basis of limited proteolysis, appears to be either serine-19 or threonine-18. Phosphorylation by protein kinase C causes an inhibition of actin-activated ATPase activity of platelet myosin prephosphorylated by myosin light chain kinase. Inhibition of ATPase activity is due to a decreased affinity of myosin for actin, and no change in Vmax is observed. It is shown that platelet myosin also exhibits the 6S to 10S conformation transition as judged by viscosity and gel filtration methods. Mg2(+)-ATPase activity of platelet myosin is paralleled with the 10S-6S transition. Phosphorylation by protein kinase C affects neither the 10S-6S transition nor the myosin filament formation. Therefore, the inhibition of actin-activated ATPase activity of platelet myosin is not due to the change in the myosin conformation.     

Vanadate-mediated photocleavage of rabbit skeletal myosin

The heavy chain of myosin from rabbit skeletal muscle can be cleaved at three sites by irradiation with near-ultraviolet light in the presence of 0.1-1.0 mM vanadate. The sigmoidal dependence upon vanadate concentration, with half-maximal rate occurring at about 0.5 mM vanadate and a sigmoidicity of 2.7, is consistent with the chromophore responsible for cleavage being oligomeric vanadate. Cleavage occurs at two sites located within the head region of the molecule, 23 kDa and 75 kDa from the NH2-terminus; these sites are cleaved equally well in heavy meromyosin and subfragment 1. In the presence of 1 mM vanadate, the half-times for cleavage of the 23-kDa and 75-kDa sites are about 15 and 10 min, respectively. The rate of cleavage at both these sites is retarded 2-3-fold by the presence of greater than 10 microM MgATP. The third photocleavage site is located about 5-10 kDa from the COOH terminus of the intact heavy chain, and cleaves equally well in the isolated rod and in light meromyosin. Cleavage at this site occurs with a half-time of 138 min, and its rate is unaffected by the presence of MgATP. The vanadate-mediated cleavage of the heavy chains is accompanied by characteristic changes in the myosin ATPase properties, with the Ca2+, Mg2+ and actin-activated Mg2+ ATPases becoming elevated, whereas the K+/EDTA ATPase becomes inactivated. The sites of photocleavage in the myosin heavy chain might be associated with sites of phosphate binding.     

Localization of the actin-binding sites of Acanthamoeba myosin IB and effect of limited proteolysis on its actin-activated Mg2+-ATPase activity

Acanthamoeba myosin IB contains a 125-kDa heavy chain that has high actin-activated Mg2+-ATPase activity when 1 serine residue is phosphorylated. The heavy chain contains two F-actin-binding sites, one associated with the catalytic site and a second which allows myosin IB to cross-link actin filaments but has no direct effect on catalytic activity. Tryptic digestion of the heavy chain initially produces an NH2-terminal 62-kDa peptide that contains the ATP-binding site and the regulatory phosphorylation site, and a COOH-terminal 68-kDa peptide. F-actin, in the absence of ATP, protects this site and tryptic cleavage then produces an NH2-terminal 80-kDa peptide. Both the 62- and the 80-kDa peptides retain the (NH+4,EDTA)-ATPase activity of native myosin IB and both bind to F-actin in an ATP-sensitive manner. However, only the 80-kDa peptide retains a major portion of the actin-activated Mg2+-ATPase activity. This activity requires phosphorylation of the 80-kDa peptide by myosin I heavy chain kinase but, in contrast to the activity of intact myosin IB, it has a simple, hyperbolic dependence on the concentration of F-actin. Also unlike myosin IB, the 80-kDa peptide cannot cross-link F-actin filaments indicating the presence of only a single actin-binding site. These results allow the assignment of the actin-binding site involved in catalytic activity to the region near, and possibly on both sides of, the tryptic cleavage site 62 kDa from the NH2 terminus, and the second actin-binding site to the COOH-terminal 45-kDa domain. Thus, the NH2-terminal 80 kDa of the myosin IB heavy chain is functionally similar to the 93-kDa subfragment 1 of muscle myosin and most likely has a similar organization of functional domains.     

Selective removal of the carboxyl-terminal tail end of the Dictyostelium myosin II heavy chain by chymotrypsin

Dictyostelium myosin II is a conventional myosin consisting of two heavy chains of 243,000 Da and two pairs of light chains of 16,000 and 18,000 Da. In this paper, we show that the heavy chain of myosin II can be rapidly and selectively cleaved by chymotrypsin to yield two fragments with molecular weights of 195,000 and 38,000 Da as estimated from sodium dodecyl sulfate-polyacrylamide gels. Chymotryptic cleavage at this site occurs most readily in the absence of salt and is greatly inhibited as the salt concentration is increased from 0 to 60 mM. Amino acid sequence analysis of the small fragment demonstrates that its amino terminus corresponds to lysine 1826 of the myosin II heavy chain. If the fragment extends to the carboxyl terminus of the myosin II heavy chain, it would have a molecular weight of 33,700. Upon digestion of myosin II which has been phosphorylated with a high molecular weight Dictyostelium myosin heavy chain kinase (C?té, G.P., and Bukiejko, U. (1987) J. Biol. Chem. 262, 1065-1072), all of the phosphate is recovered on the 33,700-Da tail-end fragment. Chymotrypsin-cleaved myosin II is shown to be capable of forming filaments at salt concentrations between 20 and 100 mM as judged by its ability to be sedimented by centrifugation. Only the large fragment of myosin II is found in the pellet; the 33,700-dalton fragment remains soluble. Chymotrypsin-cleaved myosin II can bind to actin and displays a high Ca2+-activated ATPase activity but has very low actin-activated ATPase activity.     

Degradation of rat cardiac myofibrils and myofibrillar proteins by a myosin-cleaving protease.

The degradation of rat cardiac myofibrils and their constituent proteins with a myosin-cleaving protease was studied. Electrophoretograms of the digestion products of myofibrils showed that myosin,M-protein, C-protein, and troponin were degraded, but actin and tropomyosin were not. Degradation of these constituents resulted in losses of the Mg2+-ATPase activity and its Ca2+-sensitivity of myofibrils. Incubation of myofibrils with the protease induced the release of alpha-actinin without degradation. Susceptibilities of myosin, actin, troponin, and alpha-actinin purified from rat and pig hearts to the protease were essentially identical to those of the assembled forms in myofibrils. Although the purified tropomyosin was readily degraded into five fragments with the protease, the tropomyosin assembled in myofibrils and actin-tropomyosin complex were insusceptible to the protease. Digestion of myosin in the filamentous state with the protease resulted in the disappearance of myosin heavy chain and light chain 2, producing two fragments having molecular weights of 130,000 and 94,000 which originated from the degradation of heavy chain. The Ca2+- and EDTA-ATPase activities of the degradation products remained unchanged during incubation for 22 h. The actin-activated ATPase activity of myosin was reduced by 30% during incubation for 6 h, and recovered to the original level on adding actin to give a ratio of actin to myosin of 2:1. The pH optima for degradation of myosin in the soluble and filamentous states were 8.5 and 7.0, respectively. The results indicate that cardiac myosin in the filamentous state was more readily degraded with the protease than the myosin in the soluble state.     

Random phosphorylation of the two heads of thymus myosin and the independent stimulation of their actin-activated ATPases

Like other vertebrate nonmuscle myosins, thymus myosin contains two phosphorylatable light chains. Phosphorylation of these light chains regulates the actin-activated ATPase of this myosin. The time courses for the phosphorylation of both monomeric and filamentous thymus myosin by gizzard myosin light chain kinase fitted single exponentials to greater than 85% phosphorylation. This indicates that the two heads of thymus myosin are phosphorylated at the same rate and suggests that these phosphorylations are random processes. The actin-activated ATPases of thymus myosins with different levels of light chain phosphorylation were also determined. A linear relationship was obtained between the extent of light chain phosphorylation and stimulation of the actin-activated ATPase. Since thymus myosin appears to be phosphorylated randomly, this linear relationship indicates that phosphorylation of one head of thymus myosin stimulates the actin-activated ATPase of that head independently of the phosphorylation of the second head. The apparent random phosphorylation of thymus myosin light chains contrasts with the reported ordered phosphorylation of the light chains of filamentous smooth (gizzard) muscle myosin. Also, while the actin-activated ATPases of the two heads of thymus myosin are regulated independently, both heads of gizzard myosin must be phosphorylated before the ATPase of either head is activated by actin.     

Functional consequences of the proteolytic removal of regulatory serines from the nonhelical tailpiece of Acanthamoeba myosin II

The actin-activated Mg2(+)-ATPase activity of myosin II from Acanthamoeba castellanii is regulated by phosphorylation of 3 serines in its 29-residue, nonhelical, COOH-terminal tailpiece, i.e., serines-1489, -1494, and -1499 or, in reverse order, residues 11, 16, and 21 from the COOH terminus. To investigate the essential requirements for regulation, myosin II filaments in the presence of F-actin were digested by arginine-specific submaxillary gland protease. Two-dimensional peptide mapping of purified, cleaved myosin II showed that the two most terminal phosphorylation sites, serines-1494 and -1499, had been removed. Cleaved dephosphorylated myosin II retained full actin-activated Mg2(+)-ATPase activity (with no change in Vmax or Kapp) and the ability to form filaments similar to those of the native enzyme. However, higher Mg2+ concentrations were required for both filament formation and maximal ATPase activity. The one remaining regulatory serine in the cleaved myosin II was phosphorylatable by myosin II heavy-chain kinase, and phosphorylation inactivated the actin-activated Mg2(+)-ATPase activity, as in the case of the native myosin II. Also as in the case of the native myosin II, phosphorylated cleaved myosin II inhibited the actin-activated Mg2(+)-ATPase activity of dephosphorylated cleaved myosin II when the two were copolymerized. These results suggest that at least 18 of the 29 residues in the nonhelical tailpiece of the heavy chain are not required for either actin-activated Mg2(+)-ATPase activity or filament formation and that phosphorylation of Ser-1489 is sufficient to regulate the actin-activated Mg2(+)-ATPase activity of myosin II.     

Inhibition of actin-activated myosin Mg(2+)-ATPase in smooth muscle by ruthenium red.

Ruthenium red was found to inhibit actin-activated myosin Mg(2+)-ATPase in smooth muscle and to bind to myosin heavy chain, but not to F-actin. The inhibition by Ruthenium red of actin-activated Mg(2+)-ATPase was of the competitive type with respect to actin (Ki 4.4 microM) and of the non-competitive type with respect to ATP (Ki 6.6 microM). However, Ruthenium red scarcely dissociated the acto-heavy meromyosin complex during the ATPase reaction. These results suggest that Ruthenium red interacts directly with the binding site for F-actin on the myosin heavy chain. This site is considered to be necessary not for maintaining the binding affinity of myosin for F-actin, but for activation of the Mg(2+)-ATPase.     

Effects of proteolysis on the adenosinetriphosphatase activities of thymus myosin

Limited proteolysis was used to identify regions on the heavy chains of calf thymus myosin which may be involved in ATP and actin binding. Assignments of the various proteolytic fragments to different parts of the myosin heavy chain were based on solubility, gel filtration, electron microscopy, and binding of 32P-labeled regulatory light chains. Chymotrypsin rapidly cleaved within the head of thymus myosin to give a 70,000-dalton N-terminal fragment and a 140,000-dalton C-terminal fragment. These two fragments did not dissociate under nondenaturing conditions. Cleavage within the myosin tail to give heavy meromyosin occurred more slowly. Cleavage at the site 70,000 daltons from the N-terminus of the heavy chain caused about a 30-fold decrease in the actin concentration required to achieve half-maximal stimulation of the magnesium-adenosinetriphosphatase (Mg-ATPase) activity of unphosphorylated thymus myosin. The actin-activated ATPase activity of this digested myosin was only slightly affected by light chain phosphorylation. Actin inhibited the cleavage at this site by chymotrypsin. In the presence of ATP, chymotrypsin rapidly cleaved the thymus myosin heavy chain at an additional site about 4000 daltons from the N-terminus. Cleavage at this site caused a 2-fold increase in the ethylenediaminetetraacetic acid-ATPase activity and 3-fold decreases in the Ca2+- and Mg-ATPase activities of thymus myosin. Thus, cleavage at the N-terminus of thymus myosin was affected by ATP, and this cleavage altered ATPase activity. Papain cleaved the thymus myosin heavy chain about 94,000 daltons from the N-terminus to give subfragment 1.(ABSTRACT TRUNCATED AT 250 WORDS)