Rice Brittleness Mutants: A Way to Open the ‘Black Box’ of Monocot Cell Wall Biosynthesis

Rice is a model organism for studying the mechanism of cell wall biosynthesis and remolding in Gramineae.Mechanical strength is an important agronomy trait of rice (Oryza sativa L.) plants that affects crop lodging and grain yield.As a prominent physical property of cell walls,mechanical strength reflects upon the structure of different wall polymers and how they interact.Studies on the mechanisms that regulate the mechanical strength therefore consequently results in uncovering the genes functioning in cel...     

BRITTLE CULM1, which encodes a COBRA-like protein,affects the mechanical properties of rice plants

Plant mechanical strength is an important agronomic trait. To understand the molecular mechanism that controls the plant mechanical strength of crops, we characterized the classic rice mutant brittle culm1 (bc1) and isolated BC1 using a map-based cloning approach. BC1, which encodes a COBRA-like protein, is expressed mainly in developing sclerenchyma cells and in vascular bundles of rice. In these types of cells, mutations in BC1 cause not only a reduction in cell wall thickness and cellulose content but also an increase in lignin level, suggesting that BC1, a gene that controls the mechanical strength of monocots, plays an important role in the biosynthesis of the cell walls of mechanical tissues.     

Phenotypic characterization, genetic analysis and gene-mapping for a brittle mutant in rice

Plant mechanical strength is an important agronomic trait of rice. An ethyl methane sulfonate （EMS）-induced rice mutant, fragile plant 2 （fp2）, showed morphological changes and reduced mechanical strength. Genetic analysis indicated that the brittle of fp2 was controlled by a recessive gene. The fp2 gene was mapped on chromosome 10. Anatomical analyses showed that the fp2 mutation caused the reduction of cell length and cell wall thickness, increasing of cell width, and the alteration of cell wall structure as well as the vessel elements. The consequence was a global alteration in plant morphology. Chemical analyses indicated that the contents of cellulose and lignin decreased, and hemicelluloses and silicon increased in fp2. These results were different from the other mutants reported in rice. Thus, fp2 might affect the deposition and patterning of microflbrils, the biosynthesis and deposition of cell wall components, which influences the formation of primary and secondary cell walls, the thickness of cell walls, cell elongation and expansion, plant morphology and plant strength in rice.     

Rice cell wall polysaccharides: Structure and biosynthesis

Rice is the most widely consumed staple food, and is cultivated worldwide to satisfy our daily caloric needs. Thus, extensive efforts on rice breeding and biotechnology have substantially focused on the development of elite cultivars with high yields and better grain quality, as well as enhanced resistance against biotic and abiotic stresses. Recently, it has been observed that rice is more than a just grain-producing crop. Carbon-rich materials of the rice cell wall polysaccharides from post-harvest wastes, including the straw and husk, have been converted into bioethanol and other invaluable, renewable materials. In order to maximize the utilization of cell wall-derived resources, it is imperative to understand cell wall chemistry and molecular mechanism underlying cell wall biosynthesis in rice. In the last decade, several approaches, including mutational genetics and the functional characterization of candidate genes, have been successful in isolating some of cell wall biosynthetic genes in rice, marking the first step forward in obtaining a complete understanding of rice cell wall biosynthesis, although the exact biochemical functions have not been conclusive. In this paper, we focus on integrating old and new information to provide an updated perspective in the cell wall formation of rice, highlighting the chemical structures and biosynthesis of rice cell wall polysaccharides.     

BC10, a DUF266-containing and Golgi-located type II membrane protein, is required for cell-wall biosynthesis in rice (Oryza sativa L.)

Glycosyltransferases (GTs) are one of the largest enzyme groups required for the synthesis of complex wall polysaccharides and glycoproteins in plants. However, due to the limited number of related mutants that have observable phenotypes, the biological function(s) of most GTs in cell-wall biosynthesis and assembly have remained elusive. We report here the isolation and in-depth characterization of a brittle rice mutant, brittle culm 10 ( bc10 ). bc10 plants show pleiotropic phenotypes, including brittleness of the plant body and retarded growth. The BC10 gene was cloned through a map-based approach, and encodes a Golgi-located type II membrane protein that contains a domain designated as 'domain of unknown function 266' (DUF266) and represents a multiple gene family in rice. BC10 has low sequence similarity with the domain to a core 2 β-1,6- N- acetylglucosaminyltransferase (C2GnT), and its in vitro enzymatic activity suggests that it functions as a glycosyltransferase. Monosaccharide analysis of total and fractioned wall residues revealed that bc10 showed impaired cellulose biosynthesis. Immunolocalization and isolation of arabinogalactan proteins (AGPs) in the wild-type and bc10 showed that the level of AGPs in the mutant is significantly affected. BC10 is mainly expressed in the developing sclerenchyma and vascular bundle cells, and its deficiency causes a reduction in the levels of cellulose and AGPs, leading to inferior mechanical properties.     

Nitrogen fertilizer application affects lodging resistance by altering secondary cell wall synthesis in japonica rice (<Emphasis Type="Italic">Oryza sativa</Emphasis>)

Stem mechanical strength is an important agricultural quantitative trait that is closely related to lodging resistance in rice, which is known to be reduced by fertilizer with higher levels of nitrogen. To understand the mechanism that regulates stem mechanical strength in response to nitrogen, we analysed stem morphology, anatomy, mechanical properties, cell wall components, and expression of cell wall-related genes, in two varieties of japonica rice, namely, Wuyunjing23 (lodging-resistant variety) and W3668 (lodging-susceptible variety). The results showed that higher nitrogen fertilizer increased the lodging index in both varieties due to a reduction in breaking strength and bending stress, and these changes were larger in W3668. Cellulose content decreased slightly under higher nitrogen fertilizer, whereas lignin content reduced remarkably. Histochemical staining revealed that high nitrogen application decreased lignin deposition in the secondary cell wall of the sclerenchyma cells and vascular bundle cells compared with the low nitrogen treatments, while it did not alter the pattern of cellulose deposition in these cells in both Wuyunjing23 and W3668. In addition, the expression of the genes involved in lignin biosynthesis, OsPAL, OsCoMT, Os4CL3, OsCCR, OsCAD2, OsCAD7, OsCesA4, and OsCesA7, were also down-regulated under higher nitrogen conditions at the early stage of culm growth. These results suggest that the genes involved in lignin biosynthesis are down-regulated by higher nitrogen fertilizer, which causes lignin deficiency in the secondary cell walls and the weakening of mechanical tissue structure. Subsequently, this results in these internodes with reduced mechanical strength and poor lodging resistance.     

The rice dynamin‐related protein DRP2B mediates membrane trafficking,and thereby plays a critical role in secondary cell wall cellulose biosynthesis

Membrane trafficking between the plasma membrane (PM) and intracellular compartments is an important process that regulates the deposition and metabolism of cell wall polysaccharides. Dynamin‐related proteins (DRPs), which function in membrane tubulation and vesiculation are closely associated with cell wall biogenesis. However, the molecular mechanisms by which DRPs participate in cell wall formation are poorly understood. Here, we report the functional characterization of Brittle Culm3 (BC3), a gene encoding OsDRP2B. Consistent with the expression of BC3 in mechanical tissues, the bc3 mutation reduces mechanical strength, which results from decreased cellulose content and altered secondary wall structure. OsDRP2B, one of three members of the DRP2 subfamily in rice (Oryza sativa L.), was identified as an authentic membrane‐associated dynamin via in vitro biochemical analyses. Subcellular localization of fluorescence‐tagged OsDRP2B and several compartment markers in protoplast cells showed that this protein not only lies at the PM and the clathrin‐mediated vesicles, but also is targeted to the trans‐Golgi network (TGN). An FM4‐64 uptake assay in transgenic plants that express green fluorescent protein‐tagged OsDRP2B verified its involvement in an endocytic pathway. BC3 mutation and overexpression altered the abundance of cellulose synthase catalytic subunit 4 (OsCESA4) in the PM and in the endomembrane systems. All of these findings lead us to conclude that OsDRP2B participates in the endocytic pathway, probably as well as in post‐Golgi membrane trafficking. Mutation of OsDRP2B disturbs the membrane trafficking that is essential for normal cellulose biosynthesis of the secondary cell wall, thereby leading to inferior mechanical properties in rice plants.     

Vacuolar H(+)-ATPase plays a key role in cell wall biosynthesis of Aspergillus niger

The identification of suitable targets is crucial for the discovery and development of new antifungals. Since the fungal cell wall is an essential organelle, the identification of genes involved in cell wall biosynthesis is expected to help discover new antifungal targets. From our previously obtained collection of cell wall mutants with a constitutively active cell wall stress response pathway, we selected a thermosensitive, osmotic-remediable mutant with decreased resistance to SDS for complementation analysis. The phenotypes of this mutant were complemented by a gene encoding a protein with high sequence similarity to subunit d of the eukaryotic Vacuolar-H(+)-ATPase (VmaD). Genetic analysis of this thermosensitive mutant revealed that the conditional mutant allele encodes a protein that lacks 12 amino acids at the C-terminus due to a point mutation that introduces a stop codon. Deletion of the entire gene resulted in very poor growth. The conditional mutant displayed several phenotypes that are typical for V-ATPase mutants, including increased sensitivity to zinc ions and reduced acidification of the vacuole as observed by quinacrine staining. Treatment of Aspergillus niger with the V-ATPase inhibitor bafilomycinB(1) induced the expression of agsA and other cell wall related genes. Furthermore genes involved in cell wall reassembly like fksA, agsA and phiA were clearly up-regulated in the conditional mutant. Our results indicate that the ATP-driven transport of protons and acidification of the vacuole is crucial for the strength of the fungal cell wall and that reduced activity of the V-ATPase induces the cell wall stress response pathway.     

Brittle culm15 encodes a membrane-associated chitinase-like protein required for cellulose biosynthesis in rice

Plant chitinases, a class of glycosyl hydrolases, participate in various aspects of normal plant growth and development, including cell wall metabolism and disease resistance. The rice (Oryza sativa) genome encodes 37 putative chitinases and chitinase-like proteins. However, none of them has been characterized at the genetic level. In this study, we report the isolation of a brittle culm mutant, bc15, and the map-based cloning of the BC15/OsCTL1 (for chitinase-like1) gene affected in the mutant. The gene encodes the rice chitinase-like protein BC15/OsCTL1. Mutation of BC15/OsCTL1 causes reduced cellulose content and mechanical strength without obvious alterations in plant growth. Bioinformatic analyses indicated that BC15/OsCTL1 is a class II chitinase-like protein that is devoid of both an amino-terminal cysteine-rich domain and the chitinase activity motif H-E-T-T but possesses an amino-terminal transmembrane domain. Biochemical assays demonstrated that BC15/OsCTL1 is a Golgi-localized type II membrane protein that lacks classical chitinase activity. Quantitative real-time polymerase chain reaction and β-glucuronidase activity analyses indicated that BC15/OsCTL1 is ubiquitously expressed. Investigation of the global expression profile of wild-type and bc15 plants, using Illumina RNA sequencing, further suggested a possible mechanism by which BC15/OsCTL1 mediates cellulose biosynthesis and cell wall remodeling. Our findings provide genetic evidence of a role for plant chitinases in cellulose biosynthesis in rice, which appears to differ from their roles as revealed by analysis of Arabidopsis (Arabidopsis thaliana).     

AUXIN RESPONSE FACTORS 6 and 17 control the flag leaf angle in rice by regulating secondary cell wall biosynthesis of lamina joints

Flag leaf angle impacts the photosynthetic capacity of densely grown plants and is thus an important agronomic breeding trait for crop architecture and yield. The hormone auxin plays a key role in regulating this trait, yet the underlying molecular and cellular mechanisms remain unclear. Here, we report that two rice (Oryza sativa) auxin response factors (ARFs), OsARF6 and OsARF17, which are highly expressed in lamina joint tissues, control flag leaf angle in response to auxin. Loss-of-function double osarf6 osarf17 mutants displayed reduced secondary cell wall levels of lamina joint sclerenchymatous cells (Scs), resulting in an exaggerated flag leaf angle and decreased grain yield under dense planting conditions. Mechanical measurements indicated that the mutant lamina joint tissues were too weak to support the weight of the flag leaf blade, resembling the phenotype of the rice increased leaf angle1 (ila1) mutant. We demonstrate that OsARF6 and OsARF17 directly bind to the ILA1 promoter independently and synergistically to activate its expression. In addition, auxin-induced ILA1 expression was dependent on OsARF6 and OsARF17. Collectively, our study reveals a mechanism that integrates auxin signaling with the secondary cell wall composition to determine flag leaf angle, providing breeding targets in rice, and potentially other cereals, for this key trait.

Two auxin response genes influence the secondary cell wall biosynthesis and the strength of lamina joints, thereby contributing to the adjustment of flag leaf angles.     

Mutational analysis of cell wall biosynthesis in Mycobacterium avium

The cell wall of the environmental pathogen Mycobacterium avium is important to its virulence and intrinsic antimicrobial resistance. To identify genes involved in cell wall biosynthesis, "transposome" insertion libraries were screened for mutants with altered colony morphology on medium containing the lipoprotein stain Congo red. Nineteen such mutants were isolated and mapped, including 10 with insertions in a functional island of cell wall biosynthetic genes that spans approximately 40 kb of the M. avium genome.     

<Emphasis Type="Italic">FLEXIBLE CULM 1</Emphasis> encoding a cinnamyl-alcohol dehydrogenase controls culm mechanical strength in rice

Culm mechanical strength is an important agronomic trait in crop breeding. To understand the molecular mechanisms that control culm mechanical strength, we identified a flexible culm1 (fc1) mutant by screening a rice T-DNA insertion mutant library. This mutant exhibited an abnormal development phenotype, including late heading time, semi-dwarf habit, and flexible culm. In this study, we cloned the FLEXIBLE CULM1 (FC1) gene in rice using a T-DNA tagging approach. FC1 encodes a cinnamyl-alcohol dehydrogenase and is mainly expressed in the sclerenchyma cells of the secondary cell wall and vascular bundle region. In these types of cells, a deficiency of FC1 in the fc1 mutant caused a reduction in cell wall thickness, as well as a decrease in lignin. Extracts from the first internodes and panicles of the fc1 plants exhibited drastically reduced cinnamyl-alcohol dehydrogenase activity. Further histological and biochemical analyses revealed that the p-hydroxyphenyl and guaiacyl monomers in fc1 cell wall were reduced greatly. Our results indicated that FC1 plays an important role in the biosynthesis of lignin and the control of culm strength in rice. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Cohesin dysfunction results in cell wall defects in budding yeast

Cohesin is a conserved chromatin-binding multisubunit protein complex involved in diverse chromosomal transactions such as sister-chromatid cohesion, chromosome condensation, regulation of gene expression, DNA replication, and repair. While working with a budding yeast temperature-sensitive mutant, mcd1-1, defective in a cohesin subunit, we observed that it was resistant to zymolyase, indicating an altered cell wall organization. The budding yeast cell wall is a strong but elastic structure essential for maintenance of cell shape and protection from extreme environmental challenges. Here, we show that the cohesin complex plays an important role in cell wall maintenance. Cohesin mutants showed high chitin content in the cell wall and sensitivity to multiple cell wall stress-inducing agents. Interestingly, temperature-dependent lethality of cohesin mutants was osmoremedial, in a HOG1-MAPK pathway-dependent manner, suggesting that the temperature sensitivity of these mutants may arise partially from cell wall defects. Moreover, Mpk1 hyper-phosphorylation indicated activation of the cell wall integrity (CWI) signaling pathway in cohesin mutants. Genetic interaction analysis revealed that the CWI pathway is essential for survival of mcd1-1 upon additional cell wall stress. The cell wall defect was independent of the cohesion function and accompanied by misregulation of expression of several genes having cell wall-related functions. Our findings reveal a requirement of cohesin in maintenance of CWI that is independent of the CWI pathway, and that may arise from cohesin’s role in regulating the expression of multiple genes encoding proteins involved in cell wall organization and biosynthesis.     

Tensile properties of Arabidopsis cell walls depend on both a xyloglucan cross-linked microfibrillar network and rhamnogalacturonan II-borate complexes

The mechanical properties of plant organs depend upon anatomical structure, cell-cell adhesion, cell turgidity, and the mechanical properties of their cell walls. By testing the mechanical responses of Arabidopsis mutants, it is possible to deduce the contribution that polymers of the cell wall make to organ strength. We developed a method to measure the tensile parameters of the expanded regions of turgid or plasmolyzed dark-grown Arabidopsis hypocotyls and applied it to the fucose biosynthesis mutant mur1, the xyloglucan glycosyltransferase mutants mur2 and mur3, and the katanin mutant bot1. Hypocotyls from plants grown in the presence of increasing concentrations of dichlorobenzonitrile, an inhibitor of cellulose synthesis, were considerably weakened, indicating the validity of our approach. In order of decreasing strength, the hypocotyls of mur2 > bot1 and mur1 > mur3 were each found to have reduced strength and a proportionate reduction in modulus compared with wild type. The tensile properties of the hypocotyls and of the inflorescence stems of mur1 were rescued by growth in the presence of high concentrations of borate, which is known to cross-link the pectic component rhamnogalacturonan II. From comparison of the mechanical responses of mur2 and mur3, we deduce that galactose-containing side chains of xyloglucan make a major contribution to overall wall strength, whereas xyloglucan fucosylation plays a comparatively minor role. We conclude that borate-complexed rhamnogalacturonan II and galactosylated xyloglucan contribute to the tensile strength of cell walls.