Novel Polymorphism of RecA Fibrils Revealed by Atomic Force Microscopy

RecA fibrils in physiological conditions have been successfully imaged using Tapping Mode atomic force microscopy. This represents the first time images of recA have been obtained without drying, freezing and/or exposure to high vacuum conditions. While previously observed structures – the monomer, the hexamer, the short rod – were seen, a new type of fibril was also observed. This protofibril is narrower in diameter than the standard fibril, and occurs in three distinct morphologies: aperiodic, 100-nm periodic, and 150-nm periodic. In addition, much longer rods were observed, and appear curved and even circular.     

Manipulation and Molecular Resolution of a Phosphatidylcholine-Supported Planar Bilayer by Atomic Force Microscopy

The morphology of supported planar bilayers has been investigated below phase transition temperature by atomic force microscopy in contact and tapping mode. The bilayers were formed by the vesicle-spreading technique. In contact mode at low scanning forces of about 1 nN true molecular resolution could be achieved for supported phosphatidylcholine bilayers. The resolution was confirmed by experiments that captured the location, average area of individual lipid headgroups and the manipulation of the bilayer surface. Repeated scanning in contact mode shifted the random topology of the surface consecutively to a striped pattern. Height profiles of defect-containing bilayers were analyzed. The shape of the defects became smooth by repeated scanning. The height profiles allowed the estimation of the indentation of the tip into the surface-adsorbed membrane. In tapping mode a disordered pattern of headgroups became visible. Our morphological data at molecular resolution suggest that the native arrangement of the choline headgroups is disordered, free of large packing defects and becomes ordered in Schallamach waves by scanning in contact mode. Received: 12 March 1997/Revised: 3 October 1997     

AFM对人乳腺癌细胞外纤连蛋白原纤维的形态学观察

探讨原子力显微镜在研究细胞和细胞外基质间的相互作用及细胞外基质的功能等方面的应用前景。应用原子力显微镜观察培养的人乳腺癌MCF 7 R细胞分泌的纤连蛋白原纤维的分布和排列规律 ,并与其他常规观察技术进行比较。应用原子力显微镜获得了多个乳腺癌细胞和细胞外纤连蛋白原纤维的整体和局部形貌图像 ,发现这些原纤维的分布和排列方式非常有规律 ,而且这些规律与其功能相适应。由于样品制备简单和分辨率较高等优点 ,原子力显微镜较适合于细胞外基质的原位观察     

Sequential Unfolding of Beta Helical Protein by Single-Molecule Atomic Force Microscopy

The parallel βhelix is a common fold among extracellular proteins, however its mechanical properties remain unexplored. In Gram-negative bacteria, extracellular proteins of diverse functions of the large ‘TpsA’ family all fold into long βhelices. Here, single-molecule atomic force microscopy and steered molecular dynamics simulations were combined to investigate the mechanical properties of a prototypic TpsA protein, FHA, the major adhesin of Bordetella pertussis. Strong extension forces were required to fully unfold this highly repetitive protein, and unfolding occurred along a stepwise, hierarchical process. Our analyses showed that the extremities of the βhelix unfold early, while central regions of the helix are more resistant to mechanical unfolding. In particular, a mechanically resistant subdomain conserved among TpsA proteins and critical for secretion was identified. This nucleus harbors structural elements packed against the βhelix that might contribute to stabilizing the N-terminal region of FHA. Hierarchical unfolding of the βhelix in response to a mechanical stress may maintain β-helical portions that can serve as templates for regaining the native structure after stress. The mechanical properties uncovered here might apply to many proteins with β-helical or related folds, both in prokaryotes and in eukaryotes, and play key roles in their structural integrity and functions.     

Peptide-Induced Domain Formation in Supported Lipid Bilayers: Direct Evidence by Combined Atomic Force and Polarized Total Internal Reflection Fluorescence Microscopy

Direct visualization of the mechanism(s) by which peptides induce localized changes to the structure of membranes has high potential for enabling understanding of the structure-function relationship in antimicrobial and cell-penetrating peptides. We have applied a combined imaging strategy to track the interaction of a model antimicrobial peptide, PFWRIRIRR-amide, with bacterial membrane-mimetic supported phospholipid bilayers comprised of POPE/TOCL. Our in situ studies revealed rapid reorganization of the POPE/TOCL membrane into localized TOCL-rich domains with a concomitant change in the organization of the membranes themselves, as reflected by changes in fluorescent-membrane-probe order parameter, upon introduction of the peptide.     

Use of Atomic Force Microscopy and Transmission Electron Microscopy for Correlative Studies of Bacterial Capsules

Bacteria can possess an outermost assembly of polysaccharide molecules, a capsule, which is attached to their cell wall. We have used two complementary, high-resolution microscopy techniques, atomic force microscopy (AFM) and transmission electron microscopy (TEM), to study bacterial capsules of four different gram-negative bacterial strains: Escherichia coli K30, Pseudomonas aeruginosa FRD1, Shewanella oneidensis MR-4, and Geobacter sulfurreducens PCA. TEM analysis of bacterial cells using different preparative techniques (whole-cell mounts, conventional embeddings, and freeze-substitution) revealed capsules for some but not all of the strains. In contrast, the use of AFM allowed the unambiguous identification of the presence of capsules on all strains used in the present study, including those that were shown by TEM to be not encapsulated. In addition, the use of AFM phase imaging allowed the visualization of the bacterial cell within the capsule, with a depth sensitivity that decreased with increasing tapping frequency.     

Full Reconstruction of a Vectorial Protein Folding Pathway by Atomic Force Microscopy and Molecular Dynamics Simulations

During co-translational folding, the nascent polypeptide chain is extruded sequentially from the ribosome exit tunnel and, under severe conformational constraints, is dictated by its one-dimensional geometry. How do such vectorial constraints impact the folding pathway? Here, we combine single-molecule atomic force spectroscopy and steered molecular dynamics simulations to examine protein folding in the presence of one-dimensional constraints that are similar to those imposed on the nascent polypeptide chain. The simulations exquisitely reproduced the experimental unfolding and refolding force extension relationships and led to the full reconstruction of the vectorial folding pathway of a large polypeptide, the 253-residue consensus ankyrin repeat protein, NI6C. We show that fully stretched and then relaxed NI6C starts folding by the formation of local secondary structures, followed by the nucleation of three N-terminal repeats. This rate-limiting step is then followed by the vectorial and sequential folding of the remaining repeats. However, after partial unfolding, when allowed to refold, the C-terminal repeats successively regain structures without any nucleation step by using the intact N-terminal repeats as a template. These results suggest a pathway for the co-translational folding of repeat proteins and have implications for mechanotransduction.     

Characterization by Atomic Force Microscopy of Alzheimer Paired Helical Filaments under Physiological Conditions

Paired helical filaments (PHF) is an aberrant structure present in the brain of Alzheimer's disease patients which has been correlated with their degree of dementia. In order to determine the structure of PHF, several studies have been performed using atomic force microscopy (AFM). However, those studies have the limitation that they have not been done in solution and the sample could be far from the real physiological conditions. In this work we present an AFM analysis of PHF in liquid environment and we compare that analysis with that performed in dry conditions. PHF imaging in liquid was only possible by using jumping mode AFM as the imaging technique. Jumping mode AFM images of PHF in solution show first, a notable increase in the absolute values of the height of the filament, and second, a smaller ratio between the height measured at the upper and at the lower part of the PHF. Direct comparison of the experimental data with structural models has been performed. From this we conclude that the PHF structure is compatible with two coupled ribbons with an overall height of 20 nm and a width of 10 nm.     

How to Control the Molecular Architecture of a Monolayer of Proteins Supported by a Lipid Bilayer

In this work, we report the spontaneous formation of a new structure composed of two lipid layers surrounding a dense monolayer of soluble proteins (lysozyme). We extend a process, initially discovered with nonionic surfactants to phospholipids (DMPC and DOPC). The motor of the protein insertion process is the difference between the protein chemical potential in the solution and in the freshly formed Newton black film (NBF). This process is completely controlled by adjusting the protein chemical potential in the solution. By means of x-ray reflectivity, we follow the evolution of the freestanding sandwich structure until a stable equilibrium state is reached. Depending on the lipid concentration with respect to the protein concentration, we observe two different behaviors of the film leading to the formation of such unique structure: at the highest lipid concentration, the usual protein diffusion into the NBF, and, at the lowest lipid concentration, the spontaneous formation of a sandwich structure immediately obtained after the drainage. Finally, we show that the insertion process is reversible, because, if the lipid concentration varies in the bulk solution, a “deswelling” of the film can be observed.     

Amyloidogenic Propensities and Conformational Properties of ProIAPP and IAPP in the Presence of Lipid Bilayer Membranes

Human islet amyloid polypeptide (hIAPP), which is considered the primary culprit for β-cell loss in type 2 diabetes mellitus patients, is synthesized in β-cells of the pancreas from its precursor pro-islet amyloid polypeptide (proIAPP), which may be important in early intracellular amyloid formation as well. We compare the amyloidogenic propensities and conformational properties of proIAPP and hIAPP in the presence of negatively charged lipid membranes, which have been discussed as loci of initiation of the fibrillation reaction. Circular dichroism studies verify the initial secondary structures of proIAPP and hIAPP to be predominantly unordered with small amounts of ordered secondary structure elements, and exhibit minor differences between these two peptides only. Using attenuated total reflection-Fourier transform infrared spectroscopy and thioflavin T fluorescence spectroscopy, as well as atomic force microscopy, we show that in the presence of negatively charged membranes, proIAPP exhibits a much higher amyloidogenic propensity than in bulk solvent. Compared to hIAPP, it is still much less amyloidogenic, however. Although differences in the secondary structures of the aggregated species of hIAPP and proIAPP at the lipid interface are small, they are reflected in morphological changes. Unlike hIAPP, proIAPP forms essentially oligomeric-like structures at the lipid interface. Besides the interaction with anionic membranes [1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) + x1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)]], interaction with zwitterionic homogeneous (DOPC) and heterogeneous (1,2-dipalmitoyl-sn-glycero-3-phosphocholine:DOPC:cholesterol 1:2:1 model raft mixture) membranes has also been studied. Both peptides do not aggregate significantly at DOPC bilayers. In the presence of the model raft membrane, hIAPP aggregates markedly as well. Conversely, proIAPP clusters into less ordered structures and to a minor extent at raft membranes only. The addition of proIAPP to hIAPP retards the hIAPP fibrillation process also in the presence of negatively charged lipid bilayers. In excess proIAPP, increased aggregation levels are finally observed, however, which could be attributed to seed-induced cofibrillation of proIAPP.     

利用原子力显微镜对A型流感病毒的形态学研究

利用透射电子显微镜(TEM)和原子力显微镜(AFM)观察流感病毒(H1N1),探讨AFM在病毒形态研究中的应用,为病毒形态学研究提供一种新型、简便、快捷的工具.TEM采用磷钨酸负染方法,AFM采用轻敲模式在大气常温下扫描成像,并对主要指标长度(直径)、Ra、Rq等进行测量.两种方法最终得到相似的形态学结果,流感病毒呈球状、丝状,并有一些形状介于两者之间.TEM提供了流感病毒二维图像,可见钉状突起,AFM则呈现了流感病毒三维图像,且可见病毒表面有凹凸不平的特征和边缘有齿轮状的突起,同时获得表面粗糙度等可以量化指标.与TEM观察相比,原子力显微镜是一种制样简单、观察直观的新型病毒形态学研究工具,其表征参数可以作为病毒形态学研究的量化指标.     

Probing Membrane Order and Topography in Supported Lipid Bilayers by Combined Polarized Total Internal Reflection Fluorescence-Atomic Force Microscopy

Determining the local structure, dynamics, and conformational requirements for protein-protein and protein-lipid interactions in membranes is critical to understanding biological processes ranging from signaling to the translocating and membranolytic action of antimicrobial peptides. We report here the application of a combined polarized total internal reflection fluorescence microscopy-in situ atomic force microscopy platform. This platform's ability to image membrane orientational order was demonstrated on DOPC/DSPC/cholesterol model membranes containing the fluorescent membrane probe, DiI-C₂₀ or BODIPY-PC. Spatially resolved order parameters and fluorophore tilt angles extracted from the polarized total internal reflection fluorescence microscopy images were in good agreement with the topographical details resolved by in situ atomic force microscopy, portending use of this technique for high-resolution characterization of membrane domain structures and peptide-membrane interactions.     

钝顶螺旋藻表面微观形貌的原子力显微镜研究

该文应用原子力显微镜(AFM)纳米级的分辨率对钝顶螺旋藻(Spirulina platensis)表面微观形貌进行了研究,获得了扫描范围为5.000×5.000μm、1.000×1.000μm和400.0×400.0nm三组清晰、稳定的图像,并对其进行了线性分析。结果表明:螺旋藻表面由紧密且无序堆积的突起结构组成,其高度小于20nm;突起结构高度从3nm~15nm不等,平均高度约为8~9nm。此法用于生物体表面,操作简单、快速、灵敏度好且样品无损伤,结果令人满意。     

Characterization of the Interaction between Diferric Transferrin and Transferrin Receptor 2 by Functional Assays and Atomic Force Microscopy

Transferrin receptor 2 (TfR2), a homologue of the classical transferrin receptor 1 (TfR1), is found in two isoforms, α and β. Like TfR1, TfR2α is a type II membrane protein, but the β form lacks transmembrane portions and therefore is likely to be an intracellular protein. To investigate the functional properties of TfR2α, we expressed the protein with FLAG tagging in transferrin-receptor-deficient Chinese hamster ovary cells. The association constant for the binding of diferric transferrin (Tf) to TfR2α is 5.6 × 10⁶ M^− 1, which is about 50 times lower than that for the binding of Tf to TfR1, with correspondingly reduced rates of iron uptake. Evidence for Tf internalization and recycling via TfR2α without degradation, as in the TfR1 pathway, was also found. The interaction of TfR2α with Tf was further investigated using atomic force microscopy, a powerful tool used for investigating the interaction between a ligand and its receptor at the single-molecule level on the living cell surface. Dynamic force microscopy reveals a difference in the interactions of Tf with TfR2α and TfR1, with Tf-TfR1 unbinding characterized by two energy barriers, while only one is present for Tf-TfR2. We speculate that this difference may reflect Tf binding to TfR2α by a single lobe, whereas two lobes of Tf participate in binding to TfR1. The difference in the binding properties of Tf to TfR1 and TfR2α may help account for the different physiological roles of the two receptors.     

Mechanosensitivity of a Rapid Bioluminescence Reporter System Assessed by Atomic Force Microscopy

Cells are sophisticated integrators of mechanical stimuli that lead to physiological, biochemical, and genetic responses. The bioluminescence of dinoflagellates, alveolate protists that use light emission for predator defense, serves as a rapid noninvasive whole-cell reporter of mechanosensitivity. In this study, we used atomic force microscopy (AFM) to explore the relationship between cell mechanical properties and mechanosensitivity in live cells of the dinoflagellate Pyrocystis lunula. Cell stiffness was 0.56 MPa, consistent with cells possessing a cell wall. Cell response depended on both the magnitude and velocity of the applied force. At the maximum stimulation velocity of 390 μm s⁻¹, the threshold response occurred at a force of 7.2 μN, resulting in a contact time of 6.1 ms and indentation of 2.1 μm. Cells did not respond to a low stimulation velocity of 20 μm s⁻¹, indicating a velocity dependent response that, based on stress relaxation experiments, was explained by the cell viscoelastic properties. This study demonstrates the use of AFM to study mechanosensitivity in a cell system that responds at fast timescales, and provides insights into how viscoelastic properties affect mechanosensitivity. It also provides a comparison with previous studies using hydrodynamic stimulation, showing the discrepancy in cell response between direct compressive forces using AFM and those within flow fields based on average flow properties.     

Nanoscale Measurement of the Dielectric Constant of Supported Lipid Bilayers in Aqueous Solutions with Electrostatic Force Microscopy

We present what is, to our knowledge, the first experimental demonstration of dielectric constant measurement and quantification of supported lipid bilayers in electrolyte solutions with nanoscale spatial resolution. The dielectric constant was quantitatively reconstructed with finite element calculations by combining thickness information and local polarization forces which were measured using an electrostatic force microscope adapted to work in a liquid environment. Measurements of submicrometric dipalmitoylphosphatidylcholine lipid bilayer patches gave dielectric constants of ε_r ∼ 3, which are higher than the values typically reported for the hydrophobic part of lipid membranes (ε_r ∼ 2) and suggest a large contribution of the polar headgroup region to the dielectric response of the lipid bilayer. This work opens apparently new possibilities in the study of biomembrane electrostatics and other bioelectric phenomena.     

原子力显微观察巯基反应剂对乙酰胆碱酯酶立体结构的影响

目的:研究巯基及二硫键对乙酰胆碱酯酶(AChE)高级结构的作用。方法:将与巯基反应剂GSH和DTT作用前后的AChE重组到磷脂膜上,置于原子力显微镜下观察,扫描方式为空气中接触模式。结果:天然的AChE直径不均一,既有大粒子也有小粒子,平均最大直径(95±44)nm,平均半径(43±17)nm,平均高度(9.25±2.62)nm;与GSH反应后的AChE整体粒径明显变小,最大直径(31±13)nm,平均半径(15±4)nm,平均高度(4.02±0.67)nm;与DTT反应后的AChE边界模糊。结论:GSH可将AChE多聚体还原为单体;相同浓度的DTT作用不明显。     

Effect of Cold Plasma on Glial Cell Morphology Studied by Atomic Force Microscopy

The atomic force microscope (AFM) is broadly used to study the morphology of cells. The morphological characteristics and differences of the cell membrane between normal human astrocytes and glial tumor cells are not well explored. Following treatment with cold atmospheric plasma, evaluation of the selective effect of plasma on cell viability of tumor cells is poorly understood and requires further evaluation. Using AFM we imaged morphology of glial cells before and after cold atmospheric plasma treatment. To look more closely at the effect of plasma on cell membrane, high resolution imaging was used. We report the differences between normal human astrocytes and human glioblastoma cells by considering the membrane surface details. Our data, obtained for the first time on these cells using atomic force microscopy, argue for an architectural feature on the cell membrane, i.e. brush layers, different in normal human astrocytes as compared to glioblastoma cells. The brush layer disappears from the cell membrane surface of normal E6/E7 cells and is maintained in the glioblastoma U87 cells after plasma treatment.     

High-Resolution Cryoelectron Microscopy Structure of the Cyclic Nucleotide-Modulated Potassium Channel MloK1 in a Lipid Bilayer

1. Download high-res image (330KB)
2. Download full-size image