Preparation and Characterization of Co-Grinded Mixtures of Aceclofenac and Neusilin US2 for Dissolution Enhancement of Aceclofenac

The present study was carried out with a view to enhance the dissolution of poorly water-soluble BCS-class II drug aceclofenac by co-grinding with novel porous carrier Neusilin US_2. (amorphous microporous granules of magnesium aluminosilicate, Fuji Chemical Industry, Toyama, Japan). Neusilin US₂ has been used as an important pharmaceutical excipient for solubility enhancement. Co-grinding of aceclofenac with Neusilin US₂ in a ratio of 1:5 was carried out by ball milling for 20 h. Samples of co-ground mixtures were withdrawn at the end of every 5 h. and characterized for X-ray powder diffraction, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The analysis revealed the conversion of crystalline aceclofenac to its amorphous form upon milling with Neusilin US₂. Further, in vitro dissolution rate of aceclofenac from co-ground mixture was significantly higher compared to pure aceclofenac. The accelerated stability study of co-ground mixture was carried out at 40°C/75%RH for 4 weeks, and it showed that there was no reversion from amorphous to crystalline form. Thus, it is advantageous to use a porous carrier like Neusilin US₂ in improvement of dissolution of poorly soluble drugs.     

Enhancement of Oral Bioavailability of Cilostazol by Forming its Inclusion Complexes

The study was designed to investigate the effect of cyclodextrins (CDs) on the solubility, dissolution rate, and bioavailability of cilostazol by forming inclusion complexes. Natural CDs like β-CD, γ-CD, and the hydrophilic β-CD derivatives, DM-β-CD and HP-β-CD, were used to prepare inclusion complexes with cilostazol. Phase solubility study was carried out and the stability constants were calculated assuming a 1:1 stoichiometry. Solid cilostazol complexes were prepared by coprecipitation and kneading methods and compared with physical mixtures of cilostazol and cyclodextrins. Prepared inclusion complexes were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD) studies. In vitro dissolution study was performed using phosphate buffer pH 6.4, distilled water, and HCl buffer pH 1.2 as dissolution medium. The optimized inclusion complex was studied for its bioavailability in rabbit and the results were compared with those of pure cilostazol and Pletoz-50. Phase solubility study showed dramatic improvement in the solubility of drug by formation of complexes, which was further increased by pH adjustment. The dissolution rate of cilostazol was markedly augmented by the complexation with DM-β-CD. DSC and XRD curves showed sharp endothermic peaks indicating the reduction in the microcrystallinity of cilostazol. Selected inclusion complex was also stable at ambient temperature up to 6 months. The in vivo study revealed that DM-β-CD increased the bioavailability of cilostazol with low variability in the absorption. Among all cilostazol–cyclodextrins complexes, cilostazol–DM-β-CD inclusion complex (1:3) prepared by coprecipitation method showed 1.53-fold and 4.11-fold increase in absorption along with 2.1-fold and 2.97-fold increase in dissolution rate in comparison with Pletoz-50 and pure cilostazol, respectively.     

Development of a Mini-Tablet of Co-Grinded Prednisone–Neusilin Complex for Pediatric Use

The purpose of this study is to enhance the dissolution rate of prednisone by co-grinding with Neusilin to form a complex that can be incorporated into a mini-tablet formulation for pediatrics. Prednisone–Neusilin complex was co-grinded at various ratios (1:1, 1:3, 1:5, and 1:7). The physicochemical properties of the complex were characterized by various analytical techniques including: differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), scanning electron microscope (SEM), particle size, surface area, solubility, and dissolution rate. The co-grinded prednisone–Neusilin complex (1:7) was blended with other excipients and was formulated into a 2-mm diameter mini-tablet. The mini-tablets were further evaluated for thickness, weight, content uniformity, and dissolution rate. To improve taste masking and stability, mini-tablets were coated by dip coating with Eudragit® EPO solution. DSC and XRPD results showed that prednisone was transformed from crystalline state into amorphous state after co-grinding with Neusilin. Particle size, surface area, and SEM results confirmed that prednisone was adsorbed to Neusilin’s surface. Co-grinded prednisone–Neusilin complex (1:7) had a solubility of 0.24 mg/mL and 90% dissolved within 20 min as compared to crystalline prednisone which had a solubility of 0.117 mg/mL and 30% dissolved within 20 min. The mini-tablets containing co-grinded prednisone–Neusilin complex (1:7) exhibited acceptable physicochemical and mechanical properties including dissolution rate enhancement. These mini-tablets were successfully dip coated in Eudragit® EPO solution to mask the taste of the drug during swallowing. This work illustrates the potential use of co-grinded prednisone–Neusilin to enhance solubility and dissolution rate as well as incorporation into a mini-tablet formulation for pediatric use.Key words: mini-tablet, Neusilin, pediatric, prednisone, solubility     

Physicochemical characterization and dissolution properties of nimesulide-cyclodextrin binary systems

The objective of this work is physicochemical characterization of nimesulide-cyclodextrin binary systems both in solution and solid state and to improve the dissolution properties of nimesulide (N) via complexation with α-, β, and γ-cyclodextrins (CDs). Detection of inclusion complexation was done in solution by means of phase solubility analysis, mass spectrometry, and ¹H nuclear magnetic resonance (¹H-NMR) spectroscopic studies, and in solid state using differential scanning calorimetry (DSC), powder x-ray diffractometry (X-RD), scanning electron microscopy (SEM), and in vitro dissolution studies. Phase solubility, mass spectrometry and ¹H-NMR studies in solution revealed 1∶1 M complexation of N with all CDs. A true inclusion of N with β-CD at 1∶2 M in solid state was confirmed by DSC, powder X-RD and SEM studies. Dissolution properties of N-CD binary systems were superior when compared to pure N.     

Triamterene-β-cyclodextrin systems: Preparation,characterization and in vivo evaluation

The purpose of this research was to improve the solubility and therefore dissolution and bioavailability of triamterene, a poorly water soluble diuretic, by complexation with β-cyclodextrin. Triamterene has been reported to show low bioavailability after oral administration, with wide intersubject variation. This study presents the formulation of solid dispersions of triamterene with β-cyclodextrin—by cogrinding, kneading, and coevaporation, using low pH conditions—and their characterizations, evaluation of improvement in dissolution profiles, and in vivo advantage. Phase solubility studies indicated complex with possible stoichiometry of 1∶1 and a stability constant of 167.67M⁻¹. The solid dispersions were characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance, x-ray diffraction, and differential scanning calorimetry studies. The characterization studies confirmed inclusion of the phenyl ring of triamterene within the nonpolar cavity of β-cyclodextrin in the coevaporate. Remarkable improvement in in vitro drug release profiles in 0.1 N HCl and pH 6.8 phosphate buffer was observed with all dispersions, especially the coevaporate. The coevaporate, when administered orally in rats, also exhibited improved in vivo activity, as measured by net sodium ion excretion, as compared with triamterene powder. Thus, coevaporation of the drug and β-cyclodextrin from acidified alcohol provide the optimum condition for inclusion complexation to give a binary system with remarkable improvement in in vitro drug release profile and in vivo performance.     

Physicochemical Characterization of Efavirenz–Cyclodextrin Inclusion Complexes

Efavirenz (EFV) is an oral antihuman immunodeficiency virus type 1 drug with extremely poor aqueous solubility. Thus, its gastrointestinal absorption is limited by the dissolution rate of the drug. The objective of this study was to characterize the inclusion complexes of EFV with β-cyclodextrin (β-CD), hydroxypropyl β-CD (HPβCD), and randomly methylated β-CD (RMβCD) to improve the solubility and dissolution of EFV. The inclusion complexation of EFV with cyclodextrins in the liquid state was characterized by phase solubility studies. The solid-state characterization of various EFV and CD systems was performed by X-ray diffraction, differential scanning calorimetry, and scanning electron microscopy analyses. Dissolution studies were carried out in distilled water using US Pharmacopeia dissolution rate testing equipment. Phase solubility studies provided an A_L-type solubility diagram for β-CD and A_P-type solubility diagram for HPβCD and RMβCD. The phase solubility data enabled calculating stability constants (K _s) for EFV-βCD, EFV-HPβCD, and EFV-RMβCD systems which were 288, 469, and 1,073 M⁻¹, respectively. The physical and kneaded mixtures of EFV with CDs generally provided higher dissolution of EFV as expected. The dissolution of EFV was substantially higher with HPβCD and RMβCD inclusion complexes prepared by the freeze drying method. Thus, complexation with HPβCD and RMβCD could possibly improve the dissolution rate-limited absorption of EFV.     

Application of acetate buffer in pH adjustment of sorghum mash and its influence on fuel ethanol fermentation

A 2 M sodium acetate buffer at pH 4.2 was tried to simplify the step of pH adjustment in a laboratory dry-grind procedure. Ethanol yields or conversion efficiencies of 18 sorghum hybrids improved significantly with 2.0–5.9% (3.9% on average) of relative increases when the method of pH adjustment changed from traditional HCl to the acetate buffer. Ethanol yields obtained using the two methods were highly correlated (R ² = 0.96, P < 0.0001), indicating that the acetate buffer did not influence resolution of the procedure to differentiate sorghum hybrids varying in fermentation quality. Acetate retarded the growth of Saccharomyces cerevisiae, but did not affect the overall fermentation rate. With 41–47 mM of undissociated acetic acid in mash of a sorghum hybrid at pH 4.7, rates of glucose consumption and ethanol production were inhibited during exponential phase but promoted during stationary phase. The maximum growth rate constants (μ _max) were 0.42 and 0.32 h⁻¹ for cells grown in mashes with pH adjusted by HCl and the acetate buffer, respectively. Viable cell counts of yeast in mashes with pH adjusted by the acetate buffer were 36% lower than those in mashes adjusted by HCl during stationary phase. Coupled to a 5.3% relative increase in ethanol, a 43.6% relative decrease in glycerol was observed, when the acetate buffer was substituted for HCl. Acetate helped to transfer glucose to ethanol more efficiently. The strain tested did not use acetic acid as carbon source. It was suggested that decreased levels of ATP under acetate stress stimulate glycolysis to ethanol formation, increasing its yield at the expense of biomass and glycerol production. Names are necessary to report factually on available data; however, the U.S. Department of Agriculture neither guarantees nor warrants the standard of the product, and use of the name by the U.S. Department of Agriculture implies no approval of the product to the exclusion of others that may also be suitable.     

Preformulation Study of the Inclusion Complex Irbesartan-β-Cyclodextrin

The aim of the present work was to improve the solubility and dissolution profile of Irbesartan (IRB), a poorly water-soluble drug by formation of inclusion complex with β-cyclodextrin (βCD). Phase solubility studies revealed increase in solubility of the drug upon cyclodextrin addition, showing A_L—type of graph with slope less than one indicating formation of 1:1 stoichiometry inclusion complex. The stability constant (K _s) was found to be 104.39 M⁻¹. IRB–βCD binary systems were prepared by cogrinding, kneading using alcohol, kneading using aqueous alcohol, and coevaporation methods. Characterization of the binary systems were carried out by differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, and proton nuclear magnetic resonance. The dissolution profiles of inclusion complexes were determined and compared with those of IRB alone and physical mixture. Among the various methods, coevaporation was the best in which the solubility was increased and dissolution rate of the drug was the highest. The study indicated the usefulness of cyclodextrin technology to overcome the solubility problem of IRB.     

Fed-batch versus batch cultures of <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> for γ-decalactone production from methyl ricinoleate

Constant medium feeding rate and intermittent fed-batch fermentation strategies were investigated aiming to increase the yields of γ-decalactone production by Yarrowia lipolytica, using methyl ricinoleate as substrate and ricinoleic acid source. The accumulation of another compound, 3-hydroxy-γ-decalactone, was also analyzed since it derives from the direct precursor of γ-decalactone thereby providing information about the enzymatic activities of the pathway. Both strategies were compared with the traditional batch mode in terms of overall productivity and yield in respect to the substrate. Although the productivity of γ-decalactone was considerably higher in the batch mode (168 mg l⁻¹ h⁻¹), substrate conversion to lactone (73 mg γ-decalactone g⁻¹) was greater in the intermittent fed-batch giving 6.8 g γ-decalactone l⁻¹. This last strategy therefore has potential for γ-decalactone production at an industrial level.     

Prolonged Intragastric Drug Delivery Mediated by Eudragit<Superscript>®</Superscript><Emphasis Type="Bold">E-Carrageenan Polyelectrolyte Matrix Tablets</Emphasis>

Interpolyelectrolyte (IPE) complexation between carrageenan (CG) and Eudragit E (EE) was studied in 0.1 M HCl and was used to develop floating matrix tablets aimed to prolong gastric-residence time and sustain delivery of the loaded drug. The optimum EE/CG IPE complexation weight ratio (0.6) was determined in 0.1 M HCl using apparent viscosity measurements. The IPE complex was characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. Metronidazole matrix tablets were prepared by direct compression using EE, CG, or hybrid EE/CG with ratio optimal for IPE complexation. Corresponding effervescent tablets were prepared by including Na bicarbonate as an effervescent agent. Tablets were evaluated for in vitro buoyancy and drug release in 0.1 M HCl. Both CG and EE–CG effervescent matrices (1:2 drug to polymer weight ratio, 60 mg Na bicarbonate) achieved fast and prolonged floating with floating lag times less than 30 s and floating duration of more than 10 h. The corresponding EE effervescent matrices showed delayed floating and rapid drug release, and completely dissolved after 3 h of dissolution. CG matrices showed an initial burst drug release (48.3 ± 5.0% at 1 h) followed by slow drug release over 8 h. EE–CG matrices exhibited sustained drug release in almost zero-order manner for 10 h (68.2 ± 6.6%). The dissolution data of these matrices were fitted to different dissolution models. It was found that drug release followed zero-order kinetics and was controlled by the superposition of the diffusion and erosion.     

Development and Characterization of Enteric-Coated Immediate-Release Pellets of Aceclofenac by Extrusion/Spheronization Technique Using κ-Carrageenan as a Pelletizing Agent

In the present study, an attempt was made to prepare immediate-release enteric-coated pellets of aceclofenac, a poorly soluble nonsteroidal anti-inflammatory drug that has a gastrointestinal intolerance as its serious side effect. Formulation of enteric-coated pellets with improved solubility of aceclofenac could address both of these problems. To achieve these goals, pellets were prepared by extrusion–spheronization method using pelletizing agents that can contribute to the faster disintegration and thereby improve the solubility of the drug. Different disintegrants like β-cyclodextrin, kollidon CL, Ac-Di-Sol, and sodium starch glycolate were tried in order to further improve disintegration time. The pellets were characterized for drug content, particle size distribution, flow properties, infrared spectroscopy, surface morphology, disintegration rate, and dissolution profile. The formulations, which showed best disintegration and dissolution profiles, were coated with Eudragit L100-55, an enteric-coated polymer which does not dissolve at gastric pH but dissolves at intestinal pH, releasing the drug immediately in the dissolution medium. The optimized enteric-coated formulation containing 20% κ-carrageenan, lactose, and sodium starch glycolate as a disintegrant did inhibit the release of the drug for 2 h in 0.1 N HCl, whereas 87% of the drug was released within 45 min. The improvement was substantial when it was compared with solubility of pure drug under the same conditions. Thus, dissolution profiles suggested that combination of κ-carrageenan and sodium starch glycolate resulted into fast-disintegrating, immediate-release pellets, overcoming the bioavailability problem of the poorly soluble drug, aceclofenac, and enteric coating of these pellets avoids the exposure of aceclofenac to ulcer-prone areas of the gastrointestinal tract.     

Enhancement of oxytetracycline production after gamma irradiation-induced mutagenesis of <Emphasis Type="Italic">Streptomyces rimosus</Emphasis> CN08 strain

Streptomyces rimosus CN08 isolated from Tunisian soil produced 8.6 mg l⁻¹ of oxytetracycline (OTC) under submerged fermentation (SmF). Attempts were made for enhancing OTC production after irradiation-induced mutagenesis of Streptomyces rimosus CN08 with Co⁶⁰-γ rays. 125 OTC-producing colonies were obtained after screening on kanamycin containing medium. One mutant called Streptomyces rimosus γ-45 whose OTC production increased 19-fold (165 mg l⁻¹) versus wild-type strain was selected. γ-45 mutant was used for OTC production under solid-state fermentation (SSF). Wheat bran (WB) was used as solid substrate and process parameters influencing OTC production were optimized. Solid-state fermentation increased the yield of antibiotic production (257 mg g⁻¹) when compared with submerged fermentation. Ammonium sulphate as additional nitrogen source enhanced OTC level to 298 mg g⁻¹. Interestingly, OTC production by γ-45 mutant was insensitive to phosphate which opens the way to high OTC production even in medium containing phosphate necessary for optimal mycelia growth.     

The Xmn1 polymorphic site 5′ to the Gγ gene and its correlation to the Gγ:Aγ ratio, age at first blood transfusion and clinical features in β-Thalassemia patients from Western Iran

β-Thalassemia is the most common single gene disorder in Iran and more than 25,000 affected individuals have been reported. It has been reported that in patients with β-thalassemia in the presence of Xmn1 polymorphic site the level of Hb F and ^Gγ: ^Aγ ratio is increased. The prevalence of Xmn1 polymorphic site, ^Gγ: ^Aγ ratio and Hb F in 197 β-thalassemia major patients from the Kermanshah Province of Iran were studied. The Xmn1 polymorphic site was determined by PCR-RFLP procedure. The levels of ^Gγ and ^Aγ chains were detected by HPLC. The percent of Hb F was determined using electrophoresis method. In β-thalassemia major patients the frequency of presence Xmn1 was 0.39. The mean of ^Gγ: ^Aγ ratio was found to be 2.5. In the present study it was found that in the presence of Xmn1 polymorphic site ^Gγ percent and ^Gγ: ^Aγ ratio were significantly increased (P = 0.01) and the clinical features such as splenomegaly and bone marrow expansion were significantly improved (P = 0.01). We found that in the presence of Xmn1 polymorphic site on both chromosomes (+/+) the level of Hb F tended to be increased compared to the absence of Xmn1 (−/−). The present investigation has studied the frequency of Xmn1 polymorphic site in β-thalassemia major patients from Western Iran and has revealed that the presence of this polymorphic site caused a positive influence on Hb F production and the ^Gγ percent which could improve the clinical symptoms of β-thalassemia patients.     

Characterization and <Emphasis Type="Italic">In Vitro</Emphasis> Evaluation of the Complexes of Posaconazole with β- and 2,6-di-<Emphasis Type="Italic">O</Emphasis>-methyl-β-cyclodextrin

Posaconazole is a triazole antifungal drug that with extremely poor aqueous solubility. Up to now, this drug can be administered via intravenous injection and oral suspension. However, its oral bioavailability is greatly limited by the dissolution rate of the drug. This study aimed to improve water solubility and dissolution of posaconazole through characterizing the inclusion complexes of posaconazole with β-cyclodextrin (β-CD) and 2,6-di-O-methyl-β-cyclodextrin (DM-β-CD). Phase solubility studies were performed to calculate the stability constants in solution. The results of FT-IR, PXRD, ¹H and ROESY 2D NMR, and DSC all verified the formation of the complexes in solid state. The complexes showed remarkably improved water solubility and dissolution rate than pure posaconazole. Especially, the aqueous solubility of the DM-β-CD complex is nine times higher than that of the β-CD complex. Preliminary in vitro antifungal susceptibility tests showed that the two inclusion complexes maintained high antifungal activities. These results indicated that the DM-β-CD complexes have great potential for application in the delivery of poorly water-soluble antifungal agents, such as posaconazole.     

Preparation and Solid-State Characterization of Inclusion Complexes Formed Between Miconazole and Methyl-β-Cyclodextrin

The aim of this study is to confirm the formation of inclusion complexes between miconazole (MCZ) and two derivatives of beta-cyclodextrin, methyl-beta-cyclodextrin (MβCD) and 2-hydroxypropyl-beta-cyclodextrin (HPβCD) in aqueous solution by phase solubility studies. Inclusion complexes with MβCD in the solid state were then prepared by different methods, i.e., kneading, coevaporation (COE), spray-drying (SD), and lyophilization (LPh). The physicochemical properties of these complexes were subsequently studied by means of differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction techniques. Phase solubility diagrams with MβCD and HPβCD were classified as A_P type, indicating the formation of 1:1 and 1:2 stoichiometric inclusion complexes. The apparent stability constants (K_S) calculated from the phase solubility diagram were 145.69 M⁻¹ (K _1:1) and 11.11 M⁻¹ (K _1:2) for MβCD and 126.94 M⁻¹ (K _1:1) and 2.20 M⁻¹ (K _1:2) for HPβCD. The method of preparation of the inclusion complexes in the solid state was shown to greatly affect the properties of the formed complex. Hence, the LPh, SD, and COE methods produce true inclusion complexes between MCZ and MβCD. In contrast, crystalline drug was still clearly detectable in the kneaded (KN) product.     

Effects of the Preparation Method on the Formation of True Nimodipine SBE-β-CD/HP-β-CD Inclusion Complexes and Their Dissolution Rates Enhancement

The aims of this study were to enhance the solubility and dissolution rate of nimodipine (ND) by preparing the inclusion complexes of ND with sulfobutylether-b-cyclodextrin (SBE-β-CD) and 2-hydroxypropyl-b-cyclodextrin (HP-β-CD) and to study the effect of the preparation method on the in vitro dissolution profile in different media (0.1 N HCl pH 1.2, phosphate buffer pH 7.4, and distilled water). Thus, the inclusion complexes were prepared by kneading, coprecipitation, and freeze-drying methods. Phase solubility studies were conducted to characterize the complexes in the liquid state. The inclusion complexes in the solid state were investigated with differential scanning calorimetry (DSC), X-ray diffractometry (X-RD), and Fourier transform infrared spectroscopy (FT-IR). Stable complexes of ND/SBE-β-CD and ND/HP-β-CD were formed in distilled water in a 1:1 stoichiometric inclusion complex as indicated by an A_L-type diagram. The apparent stability constants (Ks) were 1334.4 and 464.1 M⁻¹ for ND/SBE-β-CD and ND/HP-β-CD, respectively. The water-solubility of ND was significantly increased in an average of 22- and 8-fold for SBE-β-CD and HP-β-CD, respectively. DSC results showed the formation of true inclusion complexes between the drug and both SBE-β-CD and HP-β-CD prepared by the kneading method. In contrast, crystalline drug was detectable in all other products. The dissolution studies showed that all the products exhibited higher dissolution rate than those of the physical mixtures and ND alone, in all mediums. However, the kneading complexes displayed the maximum dissolution rate in comparison with drug and other complexes, confirming the influence of the preparation method on the physicochemical properties of the products.     

Using the water signal to detect invisible exchanging protons in the catalytic triad of a serine protease

Chemical Exchange Saturation Transfer (CEST) is an MRI approach that can indirectly detect exchange broadened protons that are invisible in traditional NMR spectra. We modified the CEST pulse sequence for use on high-resolution spectrometers and developed a quantitative approach for measuring exchange rates based upon CEST spectra. This new methodology was applied to the rapidly exchanging Hδ1 and Hε2 protons of His57 in the catalytic triad of bovine chymotrypsinogen-A (bCT-A). CEST enabled observation of Hε2 at neutral pH values, and also allowed measurement of solvent exchange rates for His57-Hδ1 and His57-Hε2 across a wide pH range (3–10). Hδ1 exchange was only dependent upon the charge state of the His57 (k _ex,Im+ = 470 s⁻¹, k _ex,Im = 50 s⁻¹), while Hε2 exchange was found to be catalyzed by hydroxide ion and phosphate base ( k_{\textOH ^-} k_{{{\text{OH}}^{ - } }}  = 1.7 × 10¹⁰ M⁻¹ s⁻¹, k_{\textHPO4^{2 -}} k_{{{\text{HPO}}_{4}^{2 - } }}  = 1.7 × 10⁶ M⁻¹ s⁻¹), reflecting its greater exposure to solute catalysts. Concomitant with the disappearance of the Hε2 signal as the pH was increased above its pK _a, was the appearance of a novel signal (δ = 12 ppm), which we assigned to Hγ of the nearby Ser195 nucleophile, that is hydrogen bonded to Nε2 of neutral His57. The chemical shift of Hγ is about 7 ppm downfield from a typical hydroxyl proton, suggesting a highly polarized O–Hγ bond. The significant alkoxide character of Oγ indicates that Ser195 is preactivated for nucleophilic attack before substrate binding. CEST should be generally useful for mechanistic investigations of many enzymes with labile protons involved in active site chemistry.     

Physicochemical Properties and Dissolution Studies of Dexamethasone Acetate-β-Cyclodextrin Inclusion Complexes Produced by Different Methods

Inclusion complexes between dexamethasone acetate (DMA), a poorly water soluble drug, and β-cyclodextrin (βCD) were obtained to improve the solubility and dissolution rate of this drug. Phase-solubility profile indicated that the solubility of DMA was significantly increased in the presence of βCD (33-fold) and was classified as A_L-type, indicating the 1:1 stoichiometric inclusion complexes. Solid complexes prepared by different methods (kneading, coevaporation, freeze drying) and physical mixture were characterized by differential scanning calorimetry, thermogravimetry, infrared absorption and optical microscopy. Preparation methods influenced the physicochemical properties of the products. The dissolution profiles of solid complexes were determined and compared with those DMA alone and their physical mixture, in three different mediums: simulated gastric fluid (pH 1.2), simulated intestinal fluid (pH 7.4) and distilled water. The dissolution studies showed that in all mediums DMA presented an incomplete dissolution even in four hours. In contrast, the complexes formed presented a higher dissolution rate in simulated gastric fluid (SGF pH 1.2), which indicate that these have different ionization characteristics. According to the results, the freeze–dried and kneaded products exhibited higher dissolution rates than the drug alone, in all the mediums.     

Soluplus-Solubilized Citrated Camptothecin—A Potential Drug Delivery Strategy in Colon Cancer

Camptothecin (CPT), a potent antitumor drug, exhibits poor aqueous solubility and rapid conversion from the pharmacologically active lactone form to inactive carboxylate form at physiological pH. Solid dispersion of CPT in Soluplus®, an amphiphilic polymeric solubilizer, was prepared to increase the aqueous solubility of CPT and the resultant solid dispersion along with citric acid was formulated as hard gelatin capsules that were subsequently coated with Eudragit S100 polymer for colonic delivery. FTIR spectrum of the solid dispersion confirmed the presence of CPT. PXRD and DSC revealed the semicrystalline nature of solid dispersion. The solubility of the drug was found to increase ~40 times in the presence of Soluplus and ~75 times in solid dispersion. The capsules showed no drug release in 0.01 N HCl but released 86.4% drug in lactone form in phosphate buffer (pH 7.4) and the result appears to be due to citric acid-induced lowering of pH of buffer from 7.4 to 6.0. Thus the presence of citric acid in the formulation led to stabilization of the drug in its pharmacologically active lactone form. Cytotoxicity studies conducted with the formulation of solid dispersion with citric acid, utilizing cell cytotoxicity test (MTT test) on Caco-2 cells, confirmed cytotoxic nature of the formulation.     

Preliminary Investigation on the Development of Diltiazem Resin Complex Loaded Carboxymethyl Xanthan Beads

The objective of this study was to develop a multiunit sustained release dosage form of diltiazem using a natural polymer from a completely aqueous environment. Diltiazem was complexed with resin and the resinate-loaded carboxymethyl xanthan (RCMX) beads were prepared by interacting sodium carboxymethyl xanthan (SCMX), a derivatized xanthan gum, with Al⁺³ ions. The beads were evaluated for drug entrapment efficiency (DEE) and release characteristics in enzyme free simulated gastric fluid (SGF, HCl solution, pH 1.2) and simulated intestinal fluid (SIF, USP phosphate buffer solution, pH 6.8). Increase in gelation time from 5 to 20 min and AlCl₃ concentration from 1 to 3% decreased the DEE respectively from 95 to 79% and 88.5 to 84.6%. However, increase in gum concentration from 1.5 to 2.5% increased the DEE from 86.5 to 90.7%. The variation in DEE was related to displacement of drug from the resinate by the gel forming Al⁺³ ions. While 75–82% drug was released in 2 h in SGF from various beads, 75 to 98% drug was released in 5 hour in SIF indicating the dependence of drug release on pH of dissolution media. Although the beads maintained their initial integrity throughout the dissolution process in both media, as evident from scanning electron microscopic studies, the faster release in SGF was accounted for higher swelling of the beads in SGF than in SIF. When release data (up to 60%) was fitted in power law expression, the drug release was found to be controlled by diffusion with simultaneous relaxation phenomena.