Interaction of the ocr gene 0.3 protein of bacteriophage T7 with EcoKI restriction/modification enzyme

The ocr protein, the product of gene 0.3 of bacteriophage T7, is a structural mimic of the phosphate backbone of B-form DNA. In total it mimics 22 phosphate groups over ~24 bp of DNA. This mimicry allows it to block DNA binding by type I DNA restriction enzymes and to inhibit these enzymes. We have determined that multiple ocr dimers can bind stoichiometrically to the archetypal type I enzyme, EcoKI. One dimer binds to the core methyltransferase and two to the complete bifunctional restriction and modification enzyme. Ocr can also bind to the component subunits of EcoKI. Binding affinity to the methyltransferase core is extremely strong with a large favourable enthalpy change and an unfavourable entropy change. This strong interaction prevents the dissociation of the methyltransferase which occurs upon dilution of the enzyme. This stabilisation arises because the interaction appears to involve virtually the entire surface area of ocr and leads to the enzyme completely wrapping around ocr.     

A mutational analysis of DNA mimicry by ocr, the gene 0.3 antirestriction protein of bacteriophage T7

The ocr protein of bacteriophage T7 is a structural and electrostatic mimic of approximately 24 base pairs of double-stranded B-form DNA. As such, it inhibits all Type I restriction and modification (R/M) enzymes by blocking their DNA binding grooves and inactivates them. This allows the infection of the bacterial cell by T7 to proceed unhindered by the action of the R/M defence system. We have mutated aspartate and glutamate residues on the surface of ocr to investigate their contribution to the tight binding between the EcoKI Type I R/M enzyme and ocr. Contrary to expectations, all of the single and double site mutations of ocr constructed were active as anti-R/M proteins in vivo and in vitro indicating that the mimicry of DNA by ocr is very resistant to change.     

Shape of Ocr, the gene 0.3 protein of bacteriophage T7: modeling based on light scattering experiments

Ocr, the first protein expressed by bacteriophage T7, inhibits type Iota DNA restriction enzymes by preventing them from binding to DNA. This inhibition allows the phage to successfully infect the host. The shape of ocr is modeled on the basis of static and dynamic light scattering measurements. The static light scattering data confirm previous observations that ocr exists in solution as a dimer. The diffusion constant determined by dynamic light scattering indicates a nonspherical shape of the ocr dimer. Hydrodynamic models of ellipsoids are presented, and it is argued that ocr is best described by a prolate ellipsoid with dimensions of 10.4 nm by 2.6 nm. The size and shape predicted by this model are consistent with ocr acting as a mimic of the DNA structure bound by type Iota restriction enzymes.     

Characterisation of the structure of ocr, the gene 0.3 protein of bacteriophage T7

The product of gene 0.3 of bacteriophage T7, ocr, is a potent inhibitor of type I DNA restriction and modification enzymes. We have used biophysical methods to examine the mass, stability, shape and surface charge distribution of ocr. Ocr is a dimeric protein with hydrodynamic behaviour equivalent to a prolate ellipsoid of axial ratio 4.3 ± 0.7:1 and mass of 27 kDa. The protein is resistant to denaturation but removal of the C-terminal region reduces stability substantially. Six amino acids, N4, D25, N43, D62, S68 and W94, are all located on the surface of the protein and N4 and S68 are also located at the interface between the two 116 amino acid monomers. Negatively charged amino acid side chains surround W94 but these side chains are not part of the highly acidic C-terminus after W94. Ocr is able to displace a short DNA duplex from the binding site of a type I enzyme with a dissociation constant of the order of 100 pM or better. These results suggest that ocr is of a suitable size and shape to effectively block the DNA binding site of a type I enzyme and has a large negatively charged patch on its surface. This charge distribution may be complementary to the charge distribution within the DNA binding site of type I DNA restriction and modification enzymes.     

Structural alteration from non-B to B-form could reflect DNase I hypersensitivity

Preferential cleavage of active genes by DNase I has been correlated with a structurally altered conformation of DNA at the hypersensitive site in chromatin. To have a better understanding of the structural requirements for gene activation as probed by DNase I action, digestability by DNase I of synthetic polynucleotides having the ability to adopt B and non-B conformation (like Z-form) was studied which indicated a marked higher digestability of the B-form of DNA. Left handed Z form present within a natural sequence in supercoiled plasmid also showed marked resistance towards DNase I digestion. We show that alternating purine-pyrimidine sequences adopting Z-conformation exhibit DNAse I foot printing even in a protein free system. The logical deductions from the results indicate that 1) altered structure like Z-DNA is not a favourable substrate for DNase I, 2) both the ends of the alternating purine-pyrimidine insert showed hypersensitivity, 3) B-form with a minor groove of 12-13 A is a more favourable substrate for DNase I than an altered structure, 4) any structure of DNA deviating largely from B form with a capacity to flip over to the B-form are potential targets for the DNase I enzymic probes in naked DNA.     

FLP protein of 2 mu circle plasmid of yeast induces multiple bends in the FLP recognition target site

The FLP recombinase of the 2 mu plasmid of Saccharomyces cerevisiae binds to a target containing three 13 base-pair symmetry elements called a, b and c. The symmetry elements b and c are in direct orientation while the a element is in inverted orientation with respect to b and c on the opposite side of an eight base-pair core region. Each symmetry element acts as a binding site for the FLP protein. The FLP protein can form three different complexes with the FLP recognition target (FRT site) according to the number of elements within the site that are occupied by the FLP protein. Binding of FLP to the FRT site induces DNA bending. We have measured the angles of bends caused by the binding of the FLP protein to full and partial FRT sites. We find that FLP induces three types of bend in the FRT-containing DNA. The type I bend is approximately 60 degrees and results from a molecule of FLP bound to one symmetry element. The type II bend is greater than 144 degrees and results from FLP molecules bound to symmetry elements a and b. The type III bend is approximately 65 degrees and results from FLP proteins bound to symmetry elements b and c. Certain FLP proteins that are defective in recombination can generate the type I and type III bends but are impaired in their ability to induce the type II bend. We discuss the role of bending in FLP-mediated recombination.     

Crystal structure of NaeI-an evolutionary bridge between DNA endonuclease and topoisomerase

NAE:I is transformed from DNA endonuclease to DNA topoisomerase and recombinase by a single amino acid substitution. The crystal structure of NAE:I was solved at 2.3 A resolution and shows that NAE:I is a dimeric molecule with two domains per monomer. Each domain contains one potential DNA recognition motif corresponding to either endonuclease or topoisomerase activity. The N-terminal domain core folds like the other type II restriction endonucleases as well as lambda-exonuclease and the DNA repair enzymes MutH and Vsr, implying a common evolutionary origin and catalytic mechanism. The C-terminal domain contains a catabolite activator protein (CAP) motif present in many DNA-binding proteins, including the type IA and type II topoisomerases. Thus, the NAE:I structure implies that DNA processing enzymes evolved from a few common ancestors. NAE:I may be an evolutionary bridge between endonuclease and DNA processing enzymes.     

Extensive DNA mimicry by the ArdA anti-restriction protein and its role in the spread of antibiotic resistance

The ardA gene, found in many prokaryotes including important pathogenic species, allows associated mobile genetic elements to evade the ubiquitous Type I DNA restriction systems and thereby assist the spread of resistance genes in bacterial populations. As such, ardA contributes to a major healthcare problem. We have solved the structure of the ArdA protein from the conjugative transposon Tn916 and find that it has a novel extremely elongated curved cylindrical structure with defined helical grooves. The high density of aspartate and glutamate residues on the surface follow a helical pattern and the whole protein mimics a 42-base pair stretch of B-form DNA making ArdA by far the largest DNA mimic known. Each monomer of this dimeric structure comprises three alpha–beta domains, each with a different fold. These domains have the same fold as previously determined proteins possessing entirely different functions. This DNA mimicry explains how ArdA can bind and inhibit the Type I restriction enzymes and we demonstrate that 6 different ardA from pathogenic bacteria can function in Escherichia coli hosting a range of different Type I restriction systems.     

The structure of M.EcoKI Type I DNA methyltransferase with a DNA mimic antirestriction protein

Type-I DNA restriction–modification (R/M) systems are important agents in limiting the transmission of mobile genetic elements responsible for spreading bacterial resistance to antibiotics. EcoKI, a Type I R/M enzyme from Escherichia coli, acts by methylation- and sequence-specific recognition, leading to either methylation of DNA or translocation and cutting at a random site, often hundreds of base pairs away. Consisting of one specificity subunit, two modification subunits, and two DNA translocase/endonuclease subunits, EcoKI is inhibited by the T7 phage antirestriction protein ocr, a DNA mimic. We present a 3D density map generated by negative-stain electron microscopy and single particle analysis of the central core of the restriction complex, the M.EcoKI M₂S₁ methyltransferase, bound to ocr. We also present complete atomic models of M.EcoKI in complex with ocr and its cognate DNA giving a clear picture of the overall clamp-like operation of the enzyme. The model is consistent with a large body of experimental data on EcoKI published over 40 years.     

Solution structural studies of the Ag(I)-DNA complex.

We report equilibrium dialysis and electric dichroism studies of the two strong complexes (I and II) of silver ion with DNA. Cooperative conversion of DNA to the stronger type I complex results in a 9% length decrease, and a structure in which intercalated ethidium is perpendicular to the helix axis. Upon addition of more Ag+ to form the type II complex, the DNA length reverts to its original value and bound ethidium once again becomes tilted from the plane perpendicular to the helix axis. In both type I and type II Ag (I) - DNA complexes, ethidium binding is mildly cooperative. We interpret the results in terms of a sequence of silver-induced cooperative switches of DNA from its B-form structure with propeller twisted base pairs to a structure with flat base pairs in the type I complex, and back again to propellered base pairs in the type II complex.     

DNA translocation blockage, a general mechanism of cleavage site selection by type I restriction enzymes

Type I restriction enzymes bind to a specific DNA sequence and subsequently translocate DNA past the complex to reach a non-specific cleavage site. We have examined several potential blocks to DNA translocation, such as positive supercoiling or a Holliday junction, for their ability to trigger DNA cleavage by type I restriction enzymes. Introduction of positive supercoiling into plasmid DNA did not have a significant effect on the rate of DNA cleavage by EcoAI endonuclease nor on the enzyme's ability to select cleavage sites randomly throughout the DNA molecule. Thus, positive supercoiling does not prevent DNA translocation. EcoR124II endonuclease cleaved DNA at Holliday junctions present on both linear and negatively supercoiled substrates. The latter substrate was cleaved by a single enzyme molecule at two sites, one on either side of the junction, consistent with a bi-directional translocation model. Linear DNA molecules with two recognition sites for endonucleases from different type I families were cut between the sites when both enzymes were added simultaneously but not when a single enzyme was added. We propose that type I restriction enzymes can track along a DNA substrate irrespective of its topology and cleave DNA at any barrier that is able to halt the translocation process.     

Antirestriction proteins ArdA and Ocr as efficient inhibitors of type I restriction-modification enzymes

Genes encoding antirestriction proteins are found in transmissble plasmids (ardABC) and bacteriophage genomes (ocr, darA). Antirestriction proteins inhibit type I restriction-modification enzymes and thus protect the unmodified plasmid or phage DNA from degradation. Antirestriction proteins belong to the family of DNA-mimicry proteins, whose spatial structure mimics the B-form of DNA. Based on an analysis of the mutant forms of ArdA and Ocr obtained by site-directed mutagenesis and the native form of ArdA that specifically inhibit type I restriction enzymes but do not affect their methylase activity, a model is proposed to describe the complex formation between an antirestriction protein and a type I restriction-modification enzyme (R₂M₂S): antirestriction proteins can displace a DNA strand from its binding sites in the S subunit (which contacts a specific site on DNA) and in the R subunit (which translocates the DNA strand and cleaves it). Antirestriction and antimodification activities of ArdA and Ocr as a function of ardA and ocr expression levels were studied by cloning the genes under a strictly regulated promoter.     

5-Bromodeoxyuridine radiosensitization: conformation-dependent DNA damage

DNA structure has recently emerged as one of the key factors governing the ability of 5-bromodeoxyuridine (BrdU) to radiosensitize DNA. Here, we report the dependence of the specific damage induced by BrdU for different DNA conformations. Strand breaks are specific for B-form DNA, whereas A-DNA only undergoes formation of piperidine-sensitive DNA lesions. Interstrand cross-links are only found in semi-complementary B-DNA. DNA conformation was altered by gradually rehydrating lyophilized DNA samples, which induces an A- to B-form transition. These results were also validated by irradiating DNA in solution, in the presence or absence of 80% ethanol to induce an A- or B-form, respectively. Alkali-labile DNA lesions were revealed using hot piperidine to transform both base and sugar lesions into strand breaks. We also analyzed the location of damage as a function of DNA structure: piperidine-sensitive lesions were observed exclusively at the site of BrdU substitution, whereas strand breaks were able to migrate along the DNA strand, with a clear preference for the adenine 5' of the BrdU. Thus, not only the hybridization state but also the DNA conformation affect the degree of sensitization by BrdU by influencing the amount and type of damage produced. Although clinical trials using BrdU as a radiosensitizer have been disappointing up to this point, these new findings point to several key features of BrdU radiosensitization that may alter future radiotherapeutic studies.     

A unified model for the origin of DNA sequence-directed curvature

The fine structure of the DNA double helix and a number of its physical properties depend upon nucleotide sequence. This includes minor groove width, the propensity to undergo the B-form to A-form transition, sequence-directed curvature, and cation localization. Despite the multitude of studies conducted on DNA, it is still difficult to appreciate how these fundamental properties are linked to each other at the level of nucleotide sequence. We demonstrate that several sequence-dependent properties of DNA can be attributed, at least in part, to the sequence-specific localization of cations in the major and minor grooves. We also show that effects of cation localization on DNA structure are easier to understand if we divide all DNA sequences into three principal groups: A-tracts, G-tracts, and generic DNA. The A-tract group of sequences has a peculiar helical structure (i.e., B*-form) with an unusually narrow minor groove and high base-pair propeller twist. Both experimental and theoretical studies have provided evidence that the B*-form helical structure of A-tracts requires cations to be localized in the minor groove. G-tracts, on the other hand, have a propensity to undergo the B-form to A-form transition with increasing ionic strength. This property of G-tracts is directly connected to the observation that cations are preferentially localized in the major groove of G-tract sequences. Generic DNA, which represents the vast majority of DNA sequences, has a more balanced occupation of the major and minor grooves by cations than A-tracts or G-tracts and is thereby stabilized in the canonical B-form helix. Thus, DNA secondary structure can be viewed as a tug of war between the major and minor grooves for cations, with A-tracts and G-tracts each having one groove that dominates the other for cation localization. Finally, the sequence-directed curvature caused by A-tracts and G-tracts can, in both cases, be explained by the cation-dependent mismatch of A-tract and G-tract helical structures with the canonical B-form helix of generic DNA (i.e., a cation-dependent junction model).     

Avoidance of DNA methylation. A virus-encoded methylase inhibitor and evidence for counterselection of methylase recognition sites in viral genomes

The ocr+ gene of bacterial virus T7 codes for the first protein recognized to inhibit a specific group of DNA methylases. The recognition sequences of several other DNA methylases, not susceptible to Ocr inhibition, are significantly suppressed in the virus genome. The bacterial virus T3 encodes an Ado-Met hydrolase, destroying the methyl donor and causing T3 DNA to be totally unmethylated. These observations could stimulate analogous investigations into the regulation of DNA methylation patterns of eukaryotic viruses and cells. For instance, an underrepresentation of methylation sites (5'-CG) is also true for animal DNA viruses. Moreover, we were able to disclose some novel properties of DNA restriction-modification enzymes concerning the protection of DNA recognition sequences in which only one strand can be methylated (e.g., type III enzyme EcoP15) and the primary resistance of (unmethylated) DNA recognition sites towards type II restriction endonuclease EcoRII.     

Structural junctions in DNA: the influence of flanking sequence on nuclease digestion specificities.

When a protein binds to DNA, the affinity of this protein for its primary site of interaction may be influenced by the nature of flanking sequences. This is thought to be a consequence of local cooperativity in the DNA molecule, where the conformation at one point along the helix can influence the conformation at another, and thereby modulate the free energy of protein-DNA recognition. In order to learn more about this process, we have carried out experiments of two sorts. First, we have constructed sequences of the type (dA)11 (dG)8, where the conformational preferences of the DNA molecule switch from one extreme to another over just a single base pair, and subjected them to digestion by DNAase I and DNAase II. This is to learn whether the structure changes abruptly at the junction point, or more gradually with an influence extending into residues on either side. Secondly, we have subjected long plasmid DNA to digestion by restriction enzymes Fnu DII, Hae III, Hha I and Msp I, to look for correlations between cutting rate and the identity of nucleotides on either side of the restriction site. The influence of flanking sequence on nuclease digestion specificities is clearly evident in both kinds of experiment, but the rules governing this seem complex and not easily formulated. The best that can be done at present is to divide the problem into two parts, "analogue" and "digital", representing sugar-phosphate and base components of recognition.