核磁共振波谱法在蛋白质三维结构解析中的应用

蛋白质特定的三维结构与其生物功能密切相关,因此,研究蛋白质的三维结构有助于揭示其生物功能机制。将核磁共振（NMR）波谱法应用于研究溶液状态下蛋白质的三维结构,能够更加准确地揭示蛋白质结构与生物功能之间的关系。本文综述了NMR解析蛋白质三维结构的理论和技术方法,以及NMR结合其他生物物理手段,并辅以分子建模计算法研究蛋白质三维结构的研究进展和最新方法,为精准解析蛋白质的三维结构提供思路及策略。     

蛋白质共进化分析研究进展

一些对蛋白质活性很重要的残基在进化过程中是高度保守的,另有一些残基通过共进化来维持蛋白质结构和功能上的稳定。由于共进化残基分析可在未知蛋白质结构时,仅依据序列推断残基间的相互作用,因此在蛋白质结构和功能预测上具有重要的研究意义。当前分析共进化残基的方法主要有基于相关系数的方法、基于微扰理论的方法、参数检验法等。然而,由于存在蛋白质系统进化的背景干扰,目前共进化残基分析的精度仍有待进一步提高。本文概述了蛋白质共进化分析的方法及其研究进展,并对其发展趋势进行了预测。     

预测蛋白质可结晶性研究进展

解析蛋白质的三维结构具有重要的生物学意义,更是蛋白质功能研究和理性药物设计的基础。目前解析蛋白质结构最重要的方法是X-射线衍射晶体学解析技术。但是运用该技术解析蛋白质结构的关键是获得高质量的蛋白质晶体。然而,据统计仅有42%的可溶纯化蛋白质能够得到晶体,即不同蛋白质的可结晶性表现不同。由于实验方法验证蛋白质的可结晶性耗时耗力,因此,有研究者运用计算机模拟的方法预测蛋白质的可结晶性,从而节省资源与成本并且提高实验的成功率。本文结合我们的研究工作,介绍了几种目前较为成功的蛋白质可结晶性预测方法及其研究途径。     

SNP功能活性研究方法进展

SNP位点是目前基因多态性研究的主要内容,包括检测分型和功能活性研究两个层次,已经建立了高度自动化和高通量的SNP检测分型技术.本文系统介绍了在性状功能、蛋白质表达、mRNA转录、基因组结构功能等不同层次上进行SNP功能活性研究的方法,并对相关研究结果进行分析,通过对各种研究方法及结果的比较,对SNP位点功能活性研究的前景进行了展望.     

三维水平的蛋白质结构—功能关系

在有关蛋白质的研究中,结构—功能的关系是居于中心地位的课题。蛋白质的功能尽管纷繁复杂,但作为一类物质,它发挥功能具有一些共同的作用方式。这些作用方式的一个突出特点,就是它们都要求有特定的三维结构。所以,在三维水平上了解蛋白质结构—功能的关系,是阐明有关蛋白质生物学问题的重要环节。     

枯草杆菌蛋白酶与蛋白质工程

在以蛋白质三维结构及其与功能关系为基础的蛋白质工程的兴起中,枯草杆菌蛋白酶的定位诱变起了重要作用。以该酶为代表的蛋白质的工程研究,反映了这种生物技术所取得的进展和存在的主要问题。虽然,为了达到工程改造蛋白质的目标仍需要做大量基础性研究,但目前取得的成果足以说明蛋白质工程发展的光明前景。     

用于蛋白质分子设计的三维模体搜索

三维结构模体,常是蛋白质中离散残基片断组成的功能性子结构,传统的序列依赖结构比较方法无法对其搜索。本文采用序列无关的结构比较算法,实现了搜索程序。经多例测试,证明本程序是快速和良好的识别三维结构模式的工具,在小分子设计和多肽模拟中有重要的应用     

蛋白质二级结构预测方法初探

蛋白质二级结构的预测是生物信息学中一个重要的研究课题,在对蛋白质组的研究中也是最具难度的一个问题。进行二级结构预测对于理解蛋白质结构与功能的关系,以及分子设计、生物制药等领域都有重要的现实意义。同时也是一级结构与三级结构所联系的媒介,也为三级结构的研究打下基础。虽然目前预测的方法有几十种,但准确率最高的也只有70%多,本文对于目前方法进行分析,希望从中得到更加准确的方法。     

蛋白质二级结构指定

蛋白质二级结构是指蛋白质骨架结构中有规律重复的构象。由蛋白质原子坐标正确地指定蛋白质二级结构是分析蛋白质结构与功能的基础,二级结构的指定对于蛋白质分类、蛋白质功能模体的发现以及理解蛋白质折叠机制有着重要的作用。并且蛋白质二级结构信息广泛应用到蛋白质分子可视化、蛋白质比对以及蛋白质结构预测中。目前有超过20种蛋白质二级结构指定方法,这些方法大体可以分为两大类:基于氢键和基于几何,不同方法指定结果之间的差异较大。由于尚没有蛋白质二级结构指定方法的综述文献,因此,本文主要介绍和总结已有蛋白质二级结构指定方法。     

固有无序蛋白质及逆境胁迫下的分子功能

固有无序蛋白质是一类在生理条件下缺乏稳定三维结构而具有正常功能,参与信号转导、转录调控、胁迫应答等多种生物学过程的蛋白质.植物中许多逆境响应蛋白是固有无序蛋白质,通过其结构无序或部分无序区域在蛋白质 蛋白质、蛋白质 膜脂、蛋白质 核酸的互作中发挥重要作用.本文主要对固有无序蛋白质的类别、氨基酸组成和结构特点以及在逆境胁迫下其稳定细胞膜、保护核酸和蛋白质、调控基因表达等分子功能进行综述,以拓展对逆境胁迫下蛋白质作用分子机制的认识.     

Symmetric primary and tertiary structure mutations within a symmetric superfold: a solution, not a constraint, to achieve a foldable polypeptide

In previous studies designed to increase the primary structure symmetry within the hydrophobic core of human acidic fibroblast growth factor (FGF-1) a combination of five mutations were accommodated, resulting in structure, stability and folding kinetic properties similar to wild-type (despite the symmetric constraint upon the set of core residues). A sixth mutation in the core, involving a highly conserved Met residue at position 67, appeared intolerant to substitution. Structural analysis suggested that the local packing environment of position 67 involved two regions of apparent insertions that distorted the tertiary structure symmetry inherent in the beta-trefoil architecture. It was postulated that a symmetric constraint upon the primary structure within the core could only be achieved after these insertions had been deleted (concomitantly increasing the tertiary structure symmetry). The deletion of these insertions is now shown to permit mutation of position 67, thereby increasing the primary structure symmetry relationship within the core. Furthermore, despite the imposed symmetric constraint upon both the primary and tertiary structure, the resulting mutant form of FGF-1 is substantially more stable. The apparent inserted regions are shown to be associated with heparin-binding functionality; however, despite a marked reduction in heparin-binding affinity the mutant form of FGF-1 is surprisingly approximately 70 times more potent in 3T3 fibroblast mitogenic assays. The results support the hypothesis that primary structure symmetry within a symmetric protein superfold represents a possible solution, rather than a constraint, to achieving a foldable polypeptide.     

Integrating statistical pair potentials into protein complex prediction

The biophysical study of protein-protein interactions and docking has important implications in our understanding of most complex cellular signaling processes. Most computational approaches to protein docking involve a tradeoff between the level of detail incorporated into the model and computational power required to properly handle that level of detail. In this work, we seek to optimize that balance by showing that we can reduce the complexity of model representation and thus make the computation tractable with minimal loss of predictive performance. We also introduce a pair-wise statistical potential suitable for docking that builds on previous work and show that this potential can be incorporated into our fast fourier transform-based docking algorithm ZDOCK. We use the Protein Docking Benchmark to illustrate the improved performance of this potential compared with less detailed other scoring functions. Furthermore, we show that the new potential performs well on antibody-antigen complexes, with most predictions clustering around the Complementarity Determining Regions of antibodies without any manual intervention.     

Protein microarrays as a discovery tool for studying protein–protein interactions

Exploring the function of the genome and the encoded proteins has emerged as a new and exciting challenge in the postgenomic era. Novel technologies come into view that promise to be valuable for the investigation not only of single proteins, but of entire protein networks. Protein microarrays are the innovative assay platform for highly parallel in vitro studies of protein–protein interactions. Due to their flexibility and multiplexing capacity, protein microarrays benefit basic research, diagnosis and biomedicine. This review provides an overview on the basic principles of protein microarrays and their potential to multiplex protein–protein interaction studies.     

The heat capacity of proteins

The heat capacity plays a major role in the determination of the energetics of protein folding and molecular recognition. As such, a better understanding of this thermodynamic parameter and its structural origin will provide new insights for the development of better molecular design strategies. In this paper we have analyzed the absolute heat capacity of proteins in different conformations. The results of these studies indicate that three major terms account for the absolute heat capacity of a protein: (1) one term that depends only on the primary or covalent structure of a protein and contains contributions from vibrational frequencies arising from the stretching and bending modes of each valence bond and internal rotations; (2) a term that contains the contributions of noncovalent interactions arising from secondary and tertiary structure; and (3) a term that contains the contributions of hydration. For a typical globular protein in solution the bulk of the heat capacity at 25°C is given by the covalent structure term (close to 85% of the total). The hydration term contributes about 15 and 40% to the total heat capacity of the native and unfolded states, respectively. The contribution of non-covalent structure to the total heat capacity of the native state is positive but very small and does not amount to more than 3% at 25°C. The change in heat capacity upon unfolding is primarily given by the increase in the hydration term (about 95%) and to a much lesser extent by the loss of noncovalent interactions (up to ～5%). It is demonstrated that a single universal mathematical function can be used to represent the partial molar heat capacity of the native and unfolded states of proteins in solution. This function can be experimentally written in terms of the molecular weight, the polar and apolar solvent accessible surface areas, and the total area buried from the solvent. This unique function accurately predicts the different magnitude and temperature dependences of the heat capacity of both the native and unfolded states, and therefore of the heat capacity changes associated with folding/unfolding transitions. © 1995 Wiley-Liss, Inc.     

A solubility-enhancement tag (SET) for NMR studies of poorly behaving proteins

Protein-fusion constructs have been used with great success for enhancing expression of soluble recombinant protein and as tags for affinity purification. Unfortunately the most popular tags, such as GST and MBP, are large, which hinders direct NMR studies of the fusion proteins. Cleavage of the fusion proteins often re-introduces problems with solubility and stability. Here we describe the use of N-terminally fused protein G (B1 domain) as a non-cleavable solubility-enhancement tag (SET) for structure determination of a dimeric protein complex. The SET enhances the solubility and stability of the fusion product dramatically while not interacting directly with the protein of interest. This approach can be used for structural characterization of poorly behaving protein systems, and would be especially useful for structural genomics studies.     

Improvement of protein stability in protein microarrays

Protein stability in microarrays was improved using protein stabilizers. PEG 200 at 30% (w/v) was the most efficient stabilizer giving over 4-fold improvement in protein stability compared to without the stabilizer. PEG 200 above 10% (w/v) in the array solution prevented the evaporation of water in the sample and thereby improved protein stability in the microarray. When the streptavidin-biotin binding reaction was performed under optimized conditions, biotin-BSA-fluorescein isothiocyanate (FITC) was detected from 1 ng ml^–1 to 5 g ml^–1 by fluorescence analysis.     

A large scale test of computational protein design: folding and stability of nine completely redesigned globular proteins

A previously developed computer program for protein design, RosettaDesign, was used to predict low free energy sequences for nine naturally occurring protein backbones. RosettaDesign had no knowledge of the naturally occurring sequences and on average 65% of the residues in the designed sequences differ from wild-type. Synthetic genes for ten completely redesigned proteins were generated, and the proteins were expressed, purified, and then characterized using circular dichroism, chemical and temperature denaturation and NMR experiments. Although high-resolution structures have not yet been determined, eight of these proteins appear to be folded and their circular dichroism spectra are similar to those of their wild-type counterparts. Six of the proteins have stabilities equal to or up to 7kcal/mol greater than their wild-type counterparts, and four of the proteins have NMR spectra consistent with a well-packed, rigid structure. These encouraging results indicate that the computational protein design methods can, with significant reliability, identify amino acid sequences compatible with a target protein backbone.     

Lethal mutations in the major homology region and their suppressors act by modulating the dimerization of the rous sarcoma virus capsid protein C‐terminal domain

An infective retrovirus requires a mature capsid shell around the viral replication complex. This shell is formed by about 1500 capsid protein monomers, organized into hexamer and pentamer rings that are linked to each other by the dimerization of the C‐terminal domain (CTD). The major homology region (MHR), the most highly conserved protein sequence across retroviral genomes, is part of the CTD. Several mutations in the MHR appear to block infectivity by preventing capsid formation. Suppressor mutations have been identified that are distant in sequence and structure from the MHR and restore capsid formation. The effects of two lethal and two suppressor mutations on the stability and function of the CTD were examined. No correlation with infectivity was found for the stability of the lethal mutations (D155Y‐CTD, F167Y‐CTD) and suppressor mutations (R185W‐CTD, I190V‐CTD). The stabilities of three double mutant proteins (D155Y/R185W‐CTD, F167Y/R185W‐CTD, and F167Y/I190V‐CTD) were additive. However, the dimerization affinity of the mutant proteins correlated strongly with biological function. The CTD proteins with lethal mutations did not dimerize, while those with suppressor mutations had greater dimerization affinity than WT‐CTD. The suppressor mutations were able to partially correct the dimerization defect caused by the lethal MHR mutations in double mutant proteins. Despite their dramatic effects on dimerization, none of these residues participate directly in the proposed dimerization interface in a mature capsid. These findings suggest that the conserved sequence of the MHR has critical roles in the conformation(s) of the CTD that are required for dimerization and correct capsid maturation. Proteins 2013. © 2012 Wiley Periodicals, Inc.