A Pseudomonas strain accumulating polyesters of 3-hydroxybutyric acid and medium-chain-length 3-hydroxyalkanoic acids

Summary A citronellol-utilizing bacterium was isolated that accumulated a polyester consisting of 3-hydroxybutyric acid (3HB) and of medium-chain-length 3-hydroxyalkanoic acids (3HA_MCL) from various carbon sources up to approximately 70% of the cellular dry matter if the cells were cultivated in ammineral salts medium under nitrogen limitation. In octanoate-grown cells, for instance, the polyester consisted of 87.5 mol% 3HB and 12.5 mol% 3-hydroxyoctanoic acid (3HO), whereas it consisted of 10.3 mol% 3HB, 16.7 mol% 3HO and 73.0 mol% 3-hydroxydecanoic acid (3HD) in gluconate-grown cells. However, the results of various experiments indicated that a blend rather than a copolyester was synthesized in the cell. It was the only strain among 45 different recently isolated citronellol-utilizing bacteria that accumulated such a polyester. All other citronellol-utilizing bacteria behaved like Pseudomonas aeruginosa with respect to their polyhydroxyalkanoic acid (PHA) biosynthetic capabilities and accumulated PHA consisting of 3HA_MCL with 3HO and 3HD as the main constituents from octanoate or gluconate, respectively, whereas 3HB was never present. None of 232 different heavy-metal-resistant bacteria was able to accumulate PHA composed of 3HB plus, for example, 3HO. Only 20.3% did not accumulate any PHA at all, 44.8% accumulated PHB from gluconate, and 34.9% behaved like P. aeruginosa. Many bacteria belonging to the latter group were distinguished from the other by rapid growth in nutrient broth and in gluconate mineral salts medium and by their ability to grow in the presence of a high concentration (up to 1.5%, w/v) of octanoate. Correspondence to: A. Steinbüchel     

Inactivation of type I polyhydroxyalkanoate synthase in <Emphasis Type="Italic">Aeromonas hydrophila</Emphasis> resulted in discovery of another potential PHA synthase

Aeromonas hydrophila CGMCC 0911 possessing type I polyhydroxyalkanoate (PHA) synthase (PhaC) produced only PHBHHx from lauric acid but not from glucose. Medium-chain-length (mcl) PHA was produced from lauric acid or glucose only when PhaC of A. hydrophila was inactivated, indicating the existence of another PHA synthase in the wild type. Using PCR cloning strategy, the potential PHA synthase gene (phaC _mcl) was obtained from genomic DNA of the wild type and exhibited strong homology to type II PHA synthase genes of Pseudomonas strains. The phaC _mcl gene was PCR subcloned into plasmid pBBR1MCS2 and expressed in a PHA-negative mutant of Pseudomonas putida. Recombinant P. putida synthesized mcl PHA from gluconate or octanoate. This result proved that wild type A. hydrophila possessed another type II PHA synthase, which was responsible for the synthesis of mcl PHA, besides type I PHA synthase.     

Isolation and characterization of polyhydroxyalkanoates inclusions and their associated proteins in Pseudomonas sp. 61-3

Two types of polyester inclusions of poly(3-hydroxybutyrate) [P(3HB)] and poly(3HB-co-3-hydroxyalkanoates) [P(3HB-co-3HA)] were isolated from crude extract of Pseudomonas sp. 61-3. Proteins associated with each inclusion were separated by SDS-PAGE. PHA synthase 1 (PhaC1(Ps)), PhaF(Ps), and PhaI(Ps) were identified from P(3HB-co-3HA) inclusions by N-terminal amino acid sequences analyses, as well as PHB synthase (PhbC(Ps)) and 24-kDa unknown protein were identified from P(3HB) inclusions. The structural genes of PhaF(Ps) and PhaI(Ps) were located downstream of the pha locus. The relative PHA/PHB synthase activities of each inclusion were measured for various 3-hydroxyacyl-coenzyme As of 4-12 carbon atoms. Direct atomic force microscopy observation of P(3HB) and P(3HB-co-3HA) inclusions demonstrated that the two types of inclusions had different morphologies.     

中长链聚羟基脂肪酸酯(mcl PHA)在嗜水气单胞菌Ⅰ型PHA合酶缺失突变株中的合成

拥有Ⅰ型聚羟基脂肪酸酯(PHA)舍酶基因的嗜水气单胞菌CGMCC 0911株可利用月桂酸而不能利用葡萄糖作为碳源积累PHBHHx。将氯霉素抗性基因(cm)插入到该基因中,获得带有Ⅰ型PHA合酶断裂基因(phaC：：Cm)的自杀质粒pFH10。自杀质粒DFH10通过接合作用转入嗜水气单胞菌CGMCC 0911株中并发生体内同源重组,Cm被整合到基因组上,获得Ⅰ型PHA合酶缺失突变株。DNA序列测定证明了这一结果。GC分析表明,突变株不再产生PHBHHx,但却可利用月桂酸或葡萄糖积累中长链PHA,明显表明野生型嗜水气单胞菌基因组中存在另一个编码Ⅱ型PHA合酶的基因,且只有Ⅰ型PHA合酶被钝化后,这个功能被隐藏的Ⅱ型PHA合酶才可在细胞中发挥作用。     

Polyhydroxyalkanoate synthases PhaC1 and PhaC2 from Pseudomonas stutzeri 1317 had different substrate specificities

The whole polyhydroxyalkanoate (PHA) synthesis gene locus of Pseudomonas stutzeri strain 1317 containing PHA synthase genes phaC1Ps, phaC2Ps and PHA depolymerase gene phaZPs was cloned using a PCR cloning strategy. The sequence analysis results of the phaC1Ps, phaC2Ps and phaZPs showed high homology to the corresponding pha loci of the known Pseudomonas strains, respectively. PhaC1Ps and PhaC2Ps were functionally expressed in recombinant Escherichia coli strains and their substrate specificity was compared. The results demonstrated that PhaC1Ps and PhaC2Ps from P. stutzeri 1317 had different substrate specificities when expressed in E. coli. In details, PhaC2Ps could incorporate both short-chain-length 3-hydroxybutyrate and medium-chain-length 3-hydroxyalkanoates (mcl 3HA) into PHA, while PhaC1Ps only favored mcl 3HA for polymerization.     

Isolation of a thermotolerant bacterium producing medium-chain-length polyhydroxyalkanoate

Aims:  The aim of this study was to isolate a thermotolerant micro‐organism that produces polyhydroxyalkanoates (PHAs) composed of medium‐chain‐length (mcl) HA units from a biodiesel fuel (BDF) by‐product as a carbon source. Methods and Results:  We successfully isolated a thermotolerant micro‐organism, strain SG4502, capable to accumulate mcl‐PHA from a BDF by‐product as a carbon source at a cultivation temperature of 45°C. The strain could also produce mcl‐PHA from acetate, octanoate and dodecanoate as sole carbon sources at cultivation temperatures up to 55°C. Taxonomic studies and 16S rRNA gene sequence analysis revealed that strain SG4502 was phylogenetically affiliated with species of the genus Pseudomonas. This study is the first report of PHA synthesis by a thermotolerant Pseudomonas. Conclusions:  A novel thermotolerant bacterium capable to accumulate mcl‐PHA from a BDF by‐product was successfully isolated. Significance and Impact of the Study:  A major issue regarding industrial production of microbial PHAs is their much higher production cost compared with conventional petrochemical‐based plastic materials. Especially significant are the cost of a fermentative substrate and the running cost to maintain a temperature suitable for microbial growth. Thus, strain SG4502, isolated in this study, which assimilates BDF by‐product and produces PHA at high temperature, would be very useful for practical application in industry.     

Biosynthesis of polyhydroxyalkanoate homopolymers by Pseudomonas putida

Pseudomonas putida KT2442 has been a well-studied producer of medium-chain-length (mcl) polyhydroxyalkanoate (PHA) copolymers containing C6 ~ C14 monomer units. A mutant was constructed from P. putida KT2442 by deleting its phaG gene encoding R-3-hydroxyacyl-ACP-CoA transacylase and several other β-oxidation related genes including fadB, fadA, fadB2x, and fadAx. This mutant termed P. putida KTHH03 synthesized mcl homopolymers including poly(3-hydroxyhexanoate) (PHHx) and poly(3-hydroxyheptanoate) (PHHp), together with a near homopolymer poly(3-hydroxyoctanoate-co-2 mol% 3-hydroxyhexanoate) (PHO*) in presence of hexanoate, heptanoate, and octanoate, respectively. When deleted with its mcl PHA synthase genes phaC1 and phaC2, the recombinant mutant termed P. putida KTHH08 harboring pZWJ4-31 containing PHA synthesis operon phaPCJ from Aeromonas hydrophila 4AK4 accumulated homopolymer poly(3-hydroxyvalerate) (PHV) when valerate was used as carbon source. The phaC deleted recombinant mutant termed P. putida KTHH06 harboring pBHH01 holding PHA synthase PhbC from Ralstonia eutropha produced homopolymers poly(3-hydroxybutyrate) (PHB) and poly(4-hydroxybutyrate) using γ-butyrolactone was added as precursor. All the homopolymers were physically characterized. Their weight average molecular weights ranged from 1.8 × 10⁵ to 1.6 × 10⁶, their thermal stability changed with side chain lengths. The derivatives of P. putida KT2442 have been developed into a platform for production of various PHA homopolymers.     

Polyhydroxyalkanoate production by antarctic soil bacteria isolated from Casey Station and Signy Island

Polyhydroxyalkanoate (PHA) is a family of biopolymers produced by some bacteria and is accumulated intracellularly as carbon and energy storage material. Fifteen PHA-producing bacterial strains were identified from bacteria isolated from Antarctic soils collected around Casey Station (66°17'S, 110°32'E) and Signy Island (60°45'S, 45°36'W). Screening for PHA production was carried out by incubating the isolates in PHA production medium supplemented with 0.5% (w/v) sodium octanoate or glucose. 16S rRNA gene sequence analysis revealed that the isolated PHA-producing strains were mainly Pseudomonas spp. and a few were Janthinobacterium spp. All the isolated Pseudomonas strains were able to produce medium-chain-length (mcl) PHA using fatty acids as carbon source, while some could also produce mcl-PHA by using glucose. The Janthinobacterium strains could only utilize glucose to produce polyhydroxybutyrate (PHB). A Pseudomonas isolate, UMAB-40, accumulated PHA up to 48% cell dry mass when utilizing fatty acids as carbon source. This high accumulation occurred at between 5°C and 20°C, then decreased with increasing temperatures. Highly unsaturated mcl-PHA was produced by UMAB-40 from glucose. Such characteristics may be associated with the ability of UMAB-40 to survive in the cold.     

Analysis of in vivo substrate specificity of the PHA synthase from Ralstonia eutropha: formation of novel copolyesters in recombinant Escherichia coli

In order to investigate the in vivo substrate specificity of the type I polyhydroxyalkanoate (PHA) synthase from Ralstonia eutropha, we functionally expressed the PHA synthase gene in various Escherichia coli mutants affected in fatty acid beta-oxidation and the wild-type. The PHA synthase gene was expressed either solely (pBHR70) or in addition to the R. eutropha genes encoding beta-ketothiolase and acetoacetyl-coenzyme A (CoA) reductase comprising the entire PHB operon (pBHR68) as well as in combination with the phaC1 gene (pBHR77) from Pseudomonas aeruginosa encoding type II PHA synthase. The fatty acid beta-oxidation route was employed to provide various 3-hydroxyacyl-CoA thioesters, depending on the carbon source, as in vivo substrate for the PHA synthase. In vivo PHA synthase activity was indicated by PHA accumulation and substrate specificity was revealed by analysis of the comonomer composition of the respective polyester. Only in recombinant E. coli fad mutants harboring plasmid pBHR68, the R. eutropha PHA synthase led to accumulation of poly(3-hydroxybutyrate-co-3-hydroxyoctanoate) (poly(3HB-co-3HO)) and poly(3HB-co-3HO-co-3-hydroxydodecanoate (3HDD)), when octanoate and decanoate or dodecanoate were provided as carbon source, respectively. Coexpression of phaC1 from P. aeruginosa indicated and confirmed the provision of PHA precursor via the beta-oxidation pathway and led to the accumulation of a blend of two different PHAs in the respective E. coli strain. These data strongly suggested that R. eutropha PHA synthase accepts, besides the main substrate 3-hydroxybutyryl-CoA, also the CoA thioesters of 3HO and 3HDD.     

Inactivation of isocitrate lyase leads to increased production of medium-chain-length poly(3-hydroxyalkanoates) in Pseudomonas putida

Medium-chain-length (mcl) poly(3-hydroxyalkanoates) (PHAs) are storage polymers that are produced from various substrates and accumulate in Pseudomonas strains belonging to rRNA homology group I. In experiments aimed at increasing PHA production in Pseudomonas strains, we generated an mcl PHA-overproducing mutant of Pseudomonas putida KT2442 by transposon mutagenesis, in which the aceA gene was knocked out. This mutation inactivated the glyoxylate shunt and reduced the in vitro activity of isocitrate dehydrogenase, a rate-limiting enzyme of the citric acid cycle. The genotype of the mutant was confirmed by DNA sequencing, and the phenotype was confirmed by biochemical experiments. The aceA mutant was not able to grow on acetate as a sole carbon source due to disruption of the glyoxylate bypass and exhibited two- to fivefold lower isocitrate dehydrogenase activity than the wild type. During growth on gluconate, the difference between the mean PHA accumulation in the mutant and the mean PHA accumulation in the wild-type strain was 52%, which resulted in a significant increase in the amount of mcl PHA at the end of the exponential phase in the mutant P. putida KT217. On the basis of a stoichiometric flux analysis we predicted that knockout of the glyoxylate pathway in addition to reduced flux through isocitrate dehydrogenase should lead to increased flux into the fatty acid synthesis pathway. Therefore, enhanced carbon flow towards the fatty acid synthesis pathway increased the amount of mcl PHA that could be accumulated by the mutant.     

Production of polyesters consisting of medium chain length 3-hydroxyalkanoic acids by Pseudomonas mendocina 0806 from various carbon sources

Pseudomonas mendocina strain 0806 was isolated from oil-contaminated soil and found to produce polyesters consisting of medium chain length 3-hydroxyalkanoates (mclPHAs). The monomers of mclPHAs contained even numbers of carbon atoms, such as 3-hydroxyhexanoate (HHx or C₆), 3-hydroxyoctanoate (HO or C₈), and/or 3-hydroxydecanoate (HD or C₁₀) as major components when grown on many carbon sources unrelated to their monomeric structures, such as glucose, citric acid, and carbon sources related to their monomeric structures, such as myristic acid, octanoate, or oleic acid. On the other hand, PHA containing both even and odd numbers of hydroxyalkanoates (HA) monomers was synthesized when the strain was grown on tridecanoic acid. The molar ratio of carbon to nitrogen (C/N) had a significant effect on PHA composition: the strain produced PHAs containing 97–99% of HD monomer when grown in a glucose ammonium sulfate medium of C/N<20, and 20% HO, and 80% of the HD monomer when growth was conducted in media containing C/N>40. It was demonstrated that the HO/HD ratio in the polymers remained constant in media with a constant C/N ratio, regardless of the glucose concentration. Up to 3.6 g/L cell dry weight containing 45% of PHAs was produced when the strain was grown for 48 h in a medium containing 20 g/L glucose with a C/N ratio of 40.     

Continuous Production of Long-Side-Chain Poly-beta-Hydroxyalkanoates by Pseudomonas oleovorans

Shake flask experiments showed that Pseudomonas oleovorans began to be growth inhibited at 4.65 g of sodium octanoate liter, with total inhibition at 6 g liter. In chemostat studies with 2 g of ammonium sulfate and 8 g of octanoate liter in the feed, the maximum specific growth rate was 0.51 h, and the maximum specific rate of poly-beta-hydroxyalkanoate (PHA) production was 0.074 g of PHA g of cellular protein h at a dilution rate (D) of 0.25 h. When the specific growth rate (mu) was <0.3 h, the PHA composition was relatively constant with a C(4)/C(6)/C(8)/C(10) ratio of 0.1:1.7:20.7:1.0. At mu > 0.3 h, a decrease in the percentage of C(8) with a concomitant increase in C(10) monomers as mu increased was probably due to the effects of higher concentrations of unmetabolized octanoate in the fermentor. At D = 0.24 h and an increasing carbon/nitrogen ratio, the percentage of PHA in the biomass was constant at 13% (wt/wt), indicating that nitrogen limitation did not affect PHA accumulation. Under carbon-limited conditions, the yield of biomass from substrate was 0.76 g of biomass g of octanoate consumed, the yield of PHA was 0.085 g of PHA g of octanoate used, and 7.9 g of octanoate was consumed for each gram of NH(4) supplied. The maintenance coefficient was 0.046 g of octanoate g of biomass h. Replacement of sodium octanoate with octanoic acid appeared to result in transport-limited growth due to the water insolubility of the acid.     

In vivo and in vitro characterization of Ser477X mutations in polyhydroxyalkanoate (PHA) synthase 1 from Pseudomonas sp. 61-3: effects of beneficial mutations on enzymatic activity, substrate specificity, and molecular weight of PHA

Evolutionary engineered polyhydroxyalkanoate (PHA) synthases from Pseudomonas sp. 61-3 enhance PHA accumulation and enable the monomer composition of PHAs to be regulated. We characterized a newly screened Ser477Arg (S477R) mutant of PHA synthase by in vivo analyses of P(3-hydroxybutyrate) [P(3HB)] homopolymer and P(3HB-co-3-hydroxyalkanoate) [P(3HB-co-3HA)] copolymer productions in the recombinants of Escherichia coli. The results indicated that the S477R mutation contributed to a shift in substrate specificity to smaller monomers containing a 3HB unit rather than to an enhancement in catalytic activity. Multiple mutations of S477R with other beneficial mutations, for example, Ser325Cys, exhibited synergistic effects on both an increase in PHA production (from 9 wt % to 21 wt %) and an alteration of substrate specificity. Furthermore, the effects of complete amino acid substitutions at position 477 were characterized in terms of in vivo PHA production and in vitro enzymatic activity. The five mutations, S477Ala(A)/Phe(F)/His(H)/Arg(R)/Tyr(Y), resulted in a shift in substrate specificity to smaller monomer units. The S477Gly(G) mutant greatly enhanced activity toward all different sizes of substrates with carbon numbers ranging from 4 to 12. These results indicated that the residue 477 contributes to both the catalytic activity and substrate specificity of PHA synthase. In recombinant E. coli, the S477A/F/G/H/R/Y mutations consistently led to increases (up to 6 times that of wild-type enzyme) in weight average molecular weights of P(3HB) homopolymers. On the basis of our studies, we created a structural feasibility accounting for the mutational effects on enzymatic activity and substrate specificity of PHA synthase.     

Engineering the monomer composition of polyhydroxyalkanoates synthesized in Saccharomyces cerevisiae

Polyhydroxyalkanoates (PHAs) have received considerable interest as renewable-resource-based, biodegradable, and biocompatible plastics with a wide range of potential applications. We have engineered the synthesis of PHA polymers composed of monomers ranging from 4 to 14 carbon atoms in either the cytosol or the peroxisome of Saccharomyces cerevisiae by harnessing intermediates of fatty acid metabolism. Cytosolic PHA production was supported by establishing in the cytosol critical beta-oxidation chemistries which are found natively in peroxisomes. This platform was utilized to supply medium-chain (C6 to C14) PHA precursors from both fatty acid degradation and synthesis to a cytosolically expressed medium-chain-length (mcl) polymerase from Pseudomonas oleovorans. Synthesis of short-chain-length PHAs (scl-PHAs) was established in the peroxisome of a wild-type yeast strain by targeting the Ralstonia eutropha scl polymerase to the peroxisome. This strain, harboring a peroxisomally targeted scl-PHA synthase, accumulated PHA up to approximately 7% of its cell dry weight. These results indicate (i) that S. cerevisiae expressing a cytosolic mcl-PHA polymerase or a peroxisomal scl-PHA synthase can use the 3-hydroxyacyl coenzyme A intermediates from fatty acid metabolism to synthesize PHAs and (ii) that fatty acid degradation is also possible in the cytosol as beta-oxidation might not be confined only to the peroxisomes. Polymers of even-numbered, odd-numbered, or a combination of even- and odd-numbered monomers can be controlled by feeding the appropriate substrates. This ability should permit the rational design and synthesis of polymers with desired material properties.     

A lower specificity PhaC2 synthase from Pseudomonas stutzeri catalyses the production of copolyesters consisting of short-chain-length and medium-chain-length 3-hydroxyalkanoates

A polyhydroxyalkanoate (PHA) synthase gene phaC2 _Ps from Pseudomonas stutzeri strain 1317 was introduced into a PHA synthase gene phbC _Re negative mutant, Ralstonia eutropha PHB⁻4. It conferred on the host strain the ability to synthesize PHA, the monomer compositions of which varied widely when grown on different carbon sources. During cultivation on gluconate, the presence of phaC2 _Ps in R. eutropha PHB⁻4 led to the accumulation of polyhydroxybutyrate (PHB) homopolymer in an amount of 40.9 wt% in dry cells. With fatty acids, the recombinant successfully produced PHA copolyesters containing both short-chain-length and medium-chain-length 3-hydroxyalkanoate (3HA) of 4–12 carbon atoms in length. When cultivated on a mixture of gluconate and fatty acid, the monomer composition of accumulated PHA was greatly affected and the monomer content was easily regulated by the addition of fatty acids in the cultivation medium. After the (R)-3-hydroxydecanol-ACP:CoA transacylase gene phaG _Pp from Pseudomonas putida was introduced into phaC2 _Ps-containing R. eutropha PHB⁻4, poly(3HB-co-3HA) copolyester with a very high 3-hydroxybutyrate (3HB) fraction (97.3 mol%) was produced from gluconate and the monomer compositions of PHA synthesized from fatty acids were also altered. This study clearly demonstrated that PhaC2_Ps cloned from P. stutzeri 1317 has extraordinarily low substrate specificity in vivo, though it has only 54% identity in comparison to a previously described low-substrate-specificity PHA synthase PhaC1_Ps from Pseudomonas sp. 61–3. This study also indicated that the monomer composition and content of the synthesized PHA can be effectively modulated by controlling the addition of carbon sources or by modifying metabolic pathways in the hosts.     

Degradation of poly(3-hydroxyoctanoic acid) [P(3HO)] by bacteria: purification and properties of a P(3HO) depolymerase from Pseudomonas fluorescens GK13.

Twenty-five gram-negative bacteria and one gram-positive bacterium capable of growing on poly(3-hydroxyoctanoic acid) [P(3HO)] as the sole source of carbon and energy were isolated from various soils, lake water, and activated sludge. Most of the isolates degraded only P(3HO) and copolymers of medium-chain-length (MCL) hydroxyalkanoic acids (HA). Except for the gram-positive strain, which was able to hydrolyze P(3HO) and poly(3-hydroxybutyric acid) [P(3HB)], no isolate was able to degrade polymers of short-chain-length HA, such as P(3HB) or poly(3-hydroxyvalerate) [P(3HV)]. All strains utilized a large variety of monomeric substrates for growth. All gram-negative strains, but not the gram-positive strain, accumulated poly(hydroxyalkanoic acids) (PHA), consisting of MCL HA, if they were cultivated under accumulation conditions. One strain, which was identified as Pseudomonas fluorescens GK13 (biovar V), was selected and the extracellular P(3HO) depolymerase of this strain was purified from the culture medium of P(3HO)-grown cells by chromatography with Octyl-Sepharose CL4B and by gel filtration with Superose 12. The relative molecular weights of the native and sodium dodecyl sulfate-treated enzymes were 48,000 and 25,000, respectively. The purified enzyme hydrolyzed P(3HO), copolymers of MCL HA, and para-nitrophenyl esters of fatty acids. P(3HB), P(3HV), and characteristic substrates for lipases, such as Tween 80 or triolein, were not hydrolyzed. The P(3HO) depolymerase of P. fluorescens GK13 was insensitive to phenylmethylsulfonyl fluoride and dithioerythritol, unlike other PHA depolymerases. The dimeric ester of 3-hydroxyoctanoic acid was identified as the main product of enzymatic hydrolysis of P(3HO).(ABSTRACT TRUNCATED AT 250 WORDS)     

Inactivation of Isocitrate Lyase Leads to Increased Production of Medium-Chain-Length Poly(3-Hydroxyalkanoates) in Pseudomonas putida

Medium-chain-length (mcl) poly(3-hydroxyalkanoates) (PHAs) are storage polymers that are produced from various substrates and accumulate in Pseudomonas strains belonging to rRNA homology group I. In experiments aimed at increasing PHA production in Pseudomonas strains, we generated an mcl PHA-overproducing mutant of Pseudomonas putida KT2442 by transposon mutagenesis, in which the aceA gene was knocked out. This mutation inactivated the glyoxylate shunt and reduced the in vitro activity of isocitrate dehydrogenase, a rate-limiting enzyme of the citric acid cycle. The genotype of the mutant was confirmed by DNA sequencing, and the phenotype was confirmed by biochemical experiments. The aceA mutant was not able to grow on acetate as a sole carbon source due to disruption of the glyoxylate bypass and exhibited two- to fivefold lower isocitrate dehydrogenase activity than the wild type. During growth on gluconate, the difference between the mean PHA accumulation in the mutant and the mean PHA accumulation in the wild-type strain was 52%, which resulted in a significant increase in the amount of mcl PHA at the end of the exponential phase in the mutant P. putida KT217. On the basis of a stoichiometric flux analysis we predicted that knockout of the glyoxylate pathway in addition to reduced flux through isocitrate dehydrogenase should lead to increased flux into the fatty acid synthesis pathway. Therefore, enhanced carbon flow towards the fatty acid synthesis pathway increased the amount of mcl PHA that could be accumulated by the mutant.     

Biosynthesis of Poly(3-Hydroxyalkanoic Acid) Copolymer from CO(inf2) in Pseudomonas acidophila through Introduction of the DNA Fragment Responsible for Chemolithoautotrophic Growth of Alcaligenes hydrogenophilus

Pseudomonas acidophila is a bacterial strain producing a poly(3-hydroxyalkanoic acid) (PHA) copolymer from low-molecular-weight organic compounds such as formate and acetate. The genes responsible for PHA production were cloned in cosmid pIK7 containing a 14.8-kb HindIII fragment of P. acidophila DNA. With the aim of developing a means of producing a PHA copolymer from CO(inf2), cosmid pIK7 was introduced into a polymer-negative mutant of the chemolithoautotrophic bacterium Alcaligenes eutrophus PHB(sup-)4. However, the recombinant strain produced a homopolymer of 3-hydroxybutyric acid (polyhydroxybutyric acid) from CO(inf2). Since it was thought that the composition of the accumulated polymer might depend not on the PHA biosynthetic genes but on the metabolism of the host strain, a recombinant plasmid, pFUS, containing the genes for chemolithoautotrophic growth of the hydrogen-oxidizing bacterium A. hydrogenophilus was introduced into P. acidophila by conjugation. The recombinant plasmid pFUS was stably maintained in P. acidophila in the absence of chemolithoautotrophic or antibiotic selection. This pFUS-harboring strain possessed the ability to grow under a gas mixture of H(inf2), O(inf2), and CO(inf2) in a mineral salts medium, and PHA copolymer accumulation was confirmed by nuclear magnetic resonance spectral analysis. A gas chromatogram obtained by gas chromatography-mass spectrometry showed the composition of the polymer to be 52.8% 3-hydroxybutyrate, 41.1% 3-hydroxyoctanoate, and 6.1% 3-hydroxydecanoate. This is the first report of the production of a PHA copolymer from CO(inf2) as sole carbon source.     

Identification of 5-hydroxyhexanoic acid, 4-hydroxyheptanoic acid and 4-hydroxyoctanoic acid as new constituents of bacterial polyhydroxyalkanoic acids

 A recombinant strain of Pseudomonas putida GPp104 (pHP1014::E146), which expressed the polyhydroxyalkanoic acid (PHA) synthase of Thiocapsa pfennigii exhibiting an unusual substrate specificity at a high level was incubated in two-stage batch or fed-batch accumulation experiments with 5-hydroxyhexanoic acid (5HHx) as carbon source in the second cultivation phase, copolyesters of 3-hydroxybutyric acid (3HB) plus 5HHx, or of 3HB, 3-hydroxyhexanoic acid (3HHx) plus 5HHx were accumulated as revealed by gas-chromatographic and ¹³C-NMR spectroscopic analysis. When the recombinant P. putida GPp104 was incubated with 4-hydroxyheptanoic acid (4HHp) as carbon source in the second cultivation phase, a copolyester consisting of 3HB, 3-hydroxyvaleric acid and 3- and 4-hydroxyheptanoic acid accumulated. Providing 4-hydroxyoctanoic acid as carbon source in the second cultivation phase led to the accumulation of a polyester that contained 1–2 mol% 4-hydroxyoctanoic acid besides 3-hydroxyoctanoic acid, 3HHx, 3-hydroxyvaleric acid and 3HB. In addition to PHA containing these new constituents, PHA with 4-hydroxyvaleric acid was accumulated from laevulinic acid. Eleven strains from five genera have been also analysed for their ability to utilize different carbon sources for colony growth, which might serve as potential precursors for the biosynthesis of PHA with unusual constituents. Although most of the carbon sources were utilized by some strains for colony growth, accumulation experiments gave no evidence for the accumulation of new PHA by these wild-type strains. Received: 22 April/Received revision: 23 May 1996/Accepted: 2 June 1996