Differential effect of metals/metalloids on the growth and element uptake of mesquite plants obtained from plants grown at a copper mine tailing and commercial seeds

The selection of appropriate seeds is essential for the success of phytoremediation/restoration projects. In this research, the growth and elements uptake by the offspring of mesquite plants (Prosopis sp.) grown in a copper mine tailing (site seeds, SS) and plants derived from vendor seeds (VS) was investigated. Plants were grown in a modified Hoagland solution containing a mixture of Cu, Mo, Zn, As(III) and Cr(VI) at 0, 1, 5 and 10 mg L⁻¹ each. After one week, plants were harvested and the concentration of elements was determined by using ICP-OES. At 1 mg L⁻¹, plants originated from SS grew faster and longer than control plants (0 mg L⁻¹); whereas plants grown from VS had opposite response. At 5 mg L⁻¹, 50% of the plants grown from VS did not survive, while plants grown from SS had no toxicity effects on growth. Finally, plants grown from VS did not survive at 10 mg L⁻¹ treatment, whilst 50% of the plants grown from SS survived. The ICP-OES data demonstrated that at 1 mg L⁻¹ the concentration of all elements in SS plants was significantly higher compared to control plants and VS plants. While at 5 mg L⁻¹, the shoots of SS plants had significantly more Cu, Mo, As, and Cr. The results suggest that SS could be a better source of plants intended to be used for phytoremediation of soil impacted with Cu, Mo, Zn, As and Cr.     

Determination of Cr(VI) and Cr(III) species in parenteral solutions using a nanostructured material packed-microcolumn and electrothermal atomic absorption spectrometry

A sequential on-line preconcentration and separation system for Cr(VI) and Cr(III) species determination was developed in this work. For this purpose, a microcolumn filled with nanostructured α-alumina was used for on-line retention of Cr species in a flow-injection system. The method involves the selective elution of Cr(VI) with concentrated ammonia and Cr(III) with 1 mol L⁻¹ nitric acid for sequential injection into an electrothermal atomic absorption spectrometer (ETAAS).Analytical parameters including pH, eluent type, flow rates of sample and eluent, interfering effects, etc., were optimized. The preconcentration factors for Cr(VI) and Cr(III) were 41 and 18, respectively. The limit of detection (LOD) was 1.9 ng L⁻¹ for Cr(VI) and 6.1 ng L⁻¹ for Cr(III). The calibration graph was linear with a correlation coefficient of 0.999. The relative standard deviation (RSD) was 8.6% for Cr(VI) and 6.1% for Cr(III) (c=10 μg L⁻¹, n=10, sample volume=25 mL). Verification of the accuracy was carried out by analysis of a standard reference material (NIST SRM 1643e “Trace elements in natural water”) with a reported Cr content of 20.40±0.24 μg L⁻¹. Using the proposed methodology the total Cr content, computed as sum of Cr(III) and Cr(VI), in this SRM was 20.26±0.96 μg L⁻¹. The method was successfully applied to the determination of Cr(VI) and Cr(III) species in parenteral solutions. Concentration of Cr(III) species was found to be in the range of 0.29–3.62 μg L⁻¹, while Cr(VI) species was not detected in the samples under study.     

Efficacy of bacterial consortium-AIE2 for contemporaneous Cr(VI) and azo dye bioremediation in batch and continuous bioreactor systems, monitoring steady-state bacterial dynamics using qPCR assays

Bacterial consortium-AIE2 with a capability of contemporaneous Cr(VI) reduction and azo dye RV5 decolourization was developed from industrial wastewaters by enrichment culture technique. The 16S rRNA gene based molecular analyses revealed that the consortium bacterial community structure consisted of four bacterial strains namely, Alcaligenes sp. DMA, Bacillus sp. DMB, Stenotrophomonas sp. DMS and Enterococcus sp. DME. Cumulative mechanism of Cr(VI) reduction by the consortium was determined using in vitro Cr(VI) reduction assays. Similarly, the complete degradation of Reactive Violet 5 (RV5) dye was confirmed by FTIR spectroscopic analysis. Consortium-AIE2 exhibited simultaneous bioremediation efficiencies of (97.8 ± 1.4) % and (74.1 ± 1.2) % in treatment of both 50 mg l⁻¹ Cr(VI) and RV5 dye concentrations within 48 h of incubation at pH 7 and 37°C in batch systems. Continuous bioreactor systems achieved simultaneous bioremediation efficiencies of (98.4 ± 1.5) % and (97.5 ± 1.4) % after the onset of steady-state at 50 mg l⁻¹ input Cr(VI) and 25 mg l⁻¹ input RV5 concentrations, respectively, at medium dilution rate (D) of 0.014 h⁻¹. The 16S rRNA gene copy numbers in the continuous bioreactor as determined by real-time PCR assay indicated that Alcaligenes sp. DMA and Bacillus sp. DMB dominated consortium bacterial community during the active continuous bioremediation process.     

Biomass and photosynthetic productivity of water hyacinth (Eichhornia crassipes) as affected by nutrient supply and mirid (Eccritotarus catarinensis) biocontrol

The biological control of water hyacinth is affected by water nitrogen and phosphorus content and this was investigated experimentally at five levels of nutrient supply by measuring plant photosynthetic and growth responses, and mirid reproduction and herbivory of nutrient treated plants. Low nitrogen (2–0.2 mg L⁻¹) and phosphorus (0.2–0.01 mg L⁻¹) supply decreased hyacinth photosynthesis, growth and biomass accumulation relative to plants supplied 200 mg L⁻¹ N and 20 mg L⁻¹ P. This effect depended more on nitrogen supply than phosphorus supply. Chlorophyll fluorescence showed that the photosynthetic light reactions of low nutrient plants were affected and leaves had decreased chlorophyll content, density of functional photosystems II and dissipated a greater proportion of absorbed energy as heat. Gas exchange parameters showed reduced carboxylation efficiency, rates of RuBP regeneration and light saturated photosynthetic rates, but not quantum yields. Effects on photosynthesis translated into lower plant dry biomass. Mirid herbivory exacerbated the effects of low nutrients noted for chlorophyll fluorescence, gas exchange parameters and biomass accumulation, however, these effects were not always significant and there was no obvious correlation between the level of nutrients supplied and the effect of mirid herbivory. Low nutrient supply did, however, affect mirid performance reducing the number of adult insects, nymphs and herbivory intensity suggesting that in the long-term mirid populations would be significantly affected by water nutrient status.     

Mass transfer studies on the reduction of Cr(VI) using calcium alginate immobilized Bacillus sp. in packed bed reactor

This study presents the external mass transfer effects on the reduction of hexavalent chromium (Cr(VI)) using calcium alginate immobilized Bacillus sp. in a re-circulated packed bed batch reactor (RPBR). The effect of flow rate on the reduction Cr(VI) was studied. Theoretically calculated rate constants for various flow rates were analyzed using external film diffusion models and compared with experimental values. The external mass transfer coefficients for the bioconversion of Cr(VI) were also investigated. The external mass transfer effect was correlated with a model of the type J_D = K Re⁻⁽¹⁻ⁿ⁾. The model was tested with various K values and the mass transfer correlation J_D = 5.7 Re^−0.70 was found to predict the experimental data accurately. The proposed model would be useful for the design of industrial reactor and scale up.     

Phosphorus removal by the Ceratophyllum/periphyton complex in a south Florida (USA) freshwater marsh

Removal of phosphorus (P) by Ceratophyllum demersum L. and associated epiphytic periphyton was quantified by measuring the disappearance of soluble reactive P (SRP) from microcosms during 1-h in situ incubations conducted over a 1-year period. Initial P concentrations in these incubations ranged from 30 to >10,000 μg P L⁻¹. Phosphorus removal was proportional to initial P concentrations and was weakly correlated with solar irradiance and water temperature. Removal rates (0.6–32.8 mg P m⁻² d⁻¹) and k_v coefficients (0.68–1.93 h⁻¹) from experiments run at low initial P concentrations (up to 200 μg P L⁻¹) were comparable to results reported for other macrophytes. Removal rates from experiments run at the highest (>10,000 μg P L⁻¹) initial P concentrations (5300 and 11,100 mg P m⁻² d⁻¹) most likely represented luxury nutrient consumption and were not thought to be sustainable long term. We were unable to determine a V_max for P removal, suggesting that the nutrient-storage capability of the C. demersum/periphyton complex was not saturated during our short-term incubations. Based on N:P molar ratios, the marsh was P limited, while the C. demersum/periphyton complex was either N limited or in balance for N and P throughout this study. However, despite its tissue stoichiometry, the C. demersum/periphyton complex always exhibited an affinity for P. It appeared that the biochemical mechanisms, which mediate P removal, at least on a short-term basis, were more influenced by increases in ambient P levels than by tissue nutrient stoichiometry.     

Occurrence and toxicity of an Anabaena bloom in a tropical reservoir (Southeast Brazil)

Potentially toxic cyanobacterial blooms are becoming common in the Brazilian reservoirs in all regions of the country. During October 2004, a dense bloom of cyanobacteria occurred in the Monjolinho Reservoir (São Carlos, São Paulo State, Brazil) and a significant amount of cyanobacterial material accumulated on the water surface. Phytoplankton analysis showed that the main species in this bloom were Anabaena circinalis and Anabaena spiroides. Cladoceran (Ceriodaphnia dubia and Ceriodaphnia silvestrii) and mouse bioassays were performed to detect toxic products in extracts of the natural samples collected at the three different dates during in short period. To prepare the extracts, freeze-dried cells were dispersed in distilled water and subjected to repeated freeze/thaw cycles and sonication and centrifuging processes. Crude extracts were toxic both to cladocerans (LC₅₀ 94–406 mg freeze-dried cells L⁻¹) and mice (indicative LD₅₀ 297–445 mg freeze-dried cells kg⁻¹) and the toxicity of the bloom increased for cladocerans during the occurrence of the bloom. Toxin analysis by ELISA revealed that microcystin (MC) was found in the water of the reservoir (concentrations ranging from 28 to 45 μg L⁻¹). In addition, microcystin was also found in freeze-dried cyanobacteria cells with concentrations ranging from 138 to 223 μg g⁻¹. On the other hand, neurotoxins (saxitoxin and gonyautoxin) were not detected in any of the natural samples by HPLC. Signs of toxicity in mice did not indicate whether the bloom samples were predominantly hepatotoxic or neurotoxic. It is known that natural Anabaena blooms can contain other toxic compounds besides microcystins and neurotoxins such as lipopolysaccharides or other toxins not identified or known. Methods of detecting cyanotoxins used in this study were insufficient to clarify the toxicological features of Anabaena bloom and indicated that other methods should be investigated.     

Bioremoval of hexavalent chromium from water by a salt tolerant bacterium, Exiguobacterium sp. GS1

Pollution of terrestrial surfaces and aquatic systems by hexavalent chromium, Cr(VI), is a worldwide public health problem. A chromium resistant bacterial isolate identified as Exiguobacterium sp. GS1 by 16S rRNA gene sequencing displayed high rate of removal of Cr(VI) from water. Exiguobacterium sp. GS1 is 99% identical to Exiguobacterium acetylicum. The isolate significantly removed Cr(VI) at both high and low concentrations (1–200 μg mL⁻¹) within 12 h. The Michaelis–Menten K _m and V _max for Cr(VI) bioremoval were calculated to be 141.92 μg mL⁻¹ and 13.22 μg mL⁻¹ h⁻¹, respectively. Growth of Exiguobacterium sp. GS1 was indifferent at 1–75 μg mL⁻¹ Cr(VI) in 12 h. At initial concentration of 8,000 μg L⁻¹, Exiguobacterium sp. GS1 displayed rapid bioremoval of Cr(VI) with over 50% bioremoval in 3 h and 91% bioremoval in 8 h. Kinetic analysis of Cr(VI) bioremoval rate revealed zero-order in 8 h. Exiguobacterium sp. GS1 grew and significantly reduced Cr(VI) in cultures containing 1–9% salt indicating high salt tolerance. Similarly the isolate substantially reduced Cr(VI) over a wide range of temperature (18–45  °C) and initial pH (6.0–9.0). The T _opt and initial pH_opt were 35–40  °C and 7–8, respectively. Exiguobacterium sp. GS1 displayed a great potential for bioremediation of Cr(VI) in diverse complex environments.     

Algicidal activity of rhamnolipid biosurfactants produced by Pseudomonas aeruginosa

The algicidal activity of the rhamnolipid biosurfactants (the mixture of Rha-Rha-C₁₀-C₁₀ and Rha-C₁₀-C₁₀) produced by Pseudomonas aeruginosa was investigated in the present paper. The results indicated that the biosurfactants had potential algicidal effects on the harmful algal bloom (HAB) species, Heterosigma akashiwo. The growth of H. akashiwo was strongly inhibited in medium containing rhamnolipids (0.4–3.0 mg L⁻¹); moreover, the rhamnolipids showed strong lytic activity toward H. akashiwo at higher concentrations (≥4.0 mg L⁻¹). In addition, the effects of the rhamnolipids on the growth of Gymnodinium sp. and Prorocentrum dentatum, another two kinds of HAB species, were also studied. Compared with the dramatic algicidal effect on H. akashiwo, the cells of P. dentatum were inhibited or lysed at higher concentrations (1.0–10.0 mg L⁻¹), while the cells of Gymnodinium sp. were not suppressed with the same treatment, indicating the rhamnolipids had the potential for the selective control of HABs.Morphometric analysis at ultrastructural level by transmission electron micrographs indicated that the extent of ultrastructural damage of the alga was severe at high concentrations of rhamnolipids and during extended periods of contact. The first response occurred in the plasma membrane which partly disintegrated. The lack of membrane facilitated the rhamnolipid biosurfactants into the cells and allowed damage to other organelles, which resulted in the injury of chloroplast, vacuolization of mitochondria and deformation of the cristae, disruption of nuclear membrane and condensation of chromatin in nucleus, suggesting that the lytic activity of rhamnolipids was mainly due to their powerful surfactivity and their tendency to cohere on the surface of phospholipids bimolecular layer of the cells and further destroyed the layers, and then the structure of quasi-membrane configurations inside the cells was disintegrated, following by the irreversible damage to the ultrastructure and the loss of the function of organelles, consequently leading the cells to lyse.     

A Study on the Synthetic Characteristics of the Extracellular Polysaccharide (EPS) of Ganoderma lucidum Cultured in Batch Fermentation Using a Kinetic Model

The synthetic characteristics of the extracellular polysaccharide (EPS) of Ganoderma lucidum in batch fermentation were studied. The result showed that the production of EPS was partially growth-associated. The cell dry weight (CDW) and EPS reached 15.56 g·L⁻¹ and 3.02 g·L⁻¹, respectively. The yield of EPS to cell dry weight (Y_p/x) was 0.19. On the basis of the test results of batch fermentation, a kinetic model was proposed by using the Logistic equation for cell growth, the Luedeking–Piret equation for EPS production, and the Luedeking-piret-like equation for the consumption of glucose as substrate. The calculated results using these models were satisfactorily compared with the experimental data under various concentrations of glucose, and the average of relative errors was found to be not more than 5%. The kinetic model had practical guidance interesting in producing PES by Ganoderma lucidum.     

Characterization of two quaternary ammonium chloride-resistant bacteria isolated from papermaking processing water and the biocidal effect on their biofilm formation

Biofilm formation and growth on equipment surfaces is detrimental to papermaking processes. However, a fundamental understanding leading to an optimal control strategy is yet to be found. Quaternary ammonium compounds (QAC) are being increasingly applied in the papermaking processes. Among them, the most frequently applied, N-alkyl-benzyl-dimethyl ammonium chloride, was employed in this study. To foster fundamental understanding of QAC efficacy towards biofilm control, two of the highest QAC-resistant strains of bacteria were isolated from the papermaking processing water and employed as model organisms. By the 16S rRNA gene sequencing technique, two Gram-negative rods with QAC resistance were identified as Morganella morganii (HB22) and the biofilm-forming Pseudomonas putida (HB45). The minimal inhibition concentration (MIC) values were 8 mg L⁻¹ for HB22 and 16 mg L⁻¹ for HB45, respectively, against QAC in basal medium (BM). However, both strains could grow under more than 150 mg L⁻¹ QAC in basal medium at neutral pH. As observed by crystal violet assay and fluorescent confocal microscopy, HB45 formed biofilm more slowly on stainless steel coupon which is the prime material of papermachine than on the surface of polystyrene, the most common material for food packaging and semi-finished/finished products. HB45 formed biofilm more slowly on stainless steel coupons than on polystyrene Petri dish surfaces, as observed by crystal violet assay and fluorescent confocal microscopy. For HB45, there was a marginal increase of inhibition of biofilm formation by increasing QAC concentration from 50 to 75 mg L⁻¹. By comparison of inhibition concentration in liquid state and in biofilm formation, the results implicate that the current practice in papermaking processes of adding biocide to qualitatively control planktonic bacterial communities does not ensure control of biofilm formation.     

Influence of Cultivation Parameters on Growth and Microcystin Production of Microcystis aeruginosa (Cyanophyceae) Isolated from Lake Chao (China)

Microcystis aeruginosa isolated in 2005 from the shallow eutrophic Lake Chao (Anhui, China) was investigated in terms of growth parameters and microcystin production under varying nutrient concentrations (P, N) and pH values (abiotic factors) as well as under the influence of spent medium of the non-toxic cyanobacterium Synechocystis sp. (biotic factors). Stimulating effects on growth were observed at the alkaline pH value (10.5), whereas toxin production was significantly increased under phosphate-P limitation (0.6 mg L⁻¹ medium). Within a broad range of nitrate–N concentrations (41.2–247.2 mg L⁻¹ medium), no significant influence on cell growth and microcystin production was observed; however, N-starvation resulted in a typical decrease of growth and toxicity. In addition, cryopreservation of M. aeruginosa evidenced the decrease of toxin production by time-dependent exposure with the cryoprotectant dimethyl sulfoxide under thawing conditions without affecting the growth of the cyanobacterial cells.     

Biosorption of Cr(VI) onto marine Aspergillus niger: experimental studies and pseudo-second order kinetics

The removal of hexavalent chromium from aqueous solution was studied in batch experiments using dead biomass of three different species of marine Aspergillus after alkali treatment. All the cultures exhibited potential to remove Cr(VI), out of which, Aspergillus niger was found to be the most promising one. This culture was further studied employing variation in pH, temperature, metal ion concentration and biomass concentration with a view to understand the effect of these parameters on biosorption of Cr(VI). Higher biosorption percentage was evidenced at lower initial concentration of Cr(VI) ion, while the sorption capacity of the biomass increased with rising concentration of ions. Biomass as low as 0.8 g l⁻¹ could biosorb 95% Cr(VI) ions within 2,880 min from an aqueous solution of 400 mg l⁻¹ Cr(VI) concentration. Optimum pH and temperature for Cr(VI) biosorption were 2.0 and 50°C, respectively. Kinetic studies based on pseudo second order models like Sobkowsk and Czerwinski, Ritchie, Blanchard and Ho and Mckay rate expressions have also been carried out. The nature of the possible cell–metal ion interactions was evaluated by FTIR, SEM and EDAX analysis.     

Identification and hexavalent chromium reduction characteristics of <Emphasis Type="Italic">Pannonibacter phragmitetus</Emphasis>

A hexavalent chromium [Cr(VI)] reducing bacterial strain was isolated from chromium-containing slag. It was identified as Pannonibacter phragmitetus based on physiological, biochemical characteristics and 16S rRNA gene sequence analysis. This bacterium displayed great Cr(VI) reduction capability. The Cr(VI) could be completely removed in 24 h under anaerobic condition when the initial concentration was 1,917 mg L⁻¹, with the maximum reduction rate of 562.8 mg L⁻¹ h⁻¹. The Cr(VI) reduction rate increased with the increase of Cr(VI) concentration. P. phragmitetus was able to use many carbon sources such as lactose, fructose, glucose, pyruvate, citrate, formate, lactate, NADPH and NADH as electron donors, among which the lactate had the greatest power to promote the reduction process. Zn²⁺, Cd²⁺ and Ni²⁺ inhibited, while Cu²⁺, Pb²⁺, Mn²⁺ and Co²⁺ stimulated the reduction. The optimum pH and temperature for reduction were 9.0 and 30 °C, respectively. The results indicated that this strain had great potential for application in the bioremediation of chromate-polluted soil and water systems.     

Sorption of Cu(II) and Cd(II) by extracellular polymeric substances (EPS) from Aspergillus fumigatus

Sorption of Cu(II) and Cd(II) onto the extracellular polymeric substances (EPS) produced by Aspergillus fumigatus was investigated for the initial pH of the solution, EPS concentrations, contact time, NaCl concentration, initial metal ion concentration and the presence of other ions in the solution. The results showed that the adsorption of metal ions was significantly affected by pH, EPS concentrations, initial metal concentration, NaCl concentration and co-ions. The sorption of Cu(II) and Cd(II) increased with increasing pH and initial metal ion concentration but decreased with an increase in the NaCl concentration. The maximum sorption capacities of A. fumigatus EPS calculated from the Langmuir model were 40 mg g⁻¹ EPS and 85.5 mg g⁻¹ EPS for Cu(II) and Cd(II), respectively. The binary metal sorption experiments showed a selective metal binding affinity in the order of Cu(II) > Pb(II) > Cd(II). Both the Freundlich and Langmuir adsorption models described the sorption of Cu(II) and Cd(II) by the EPS of A. fumigatus adequately. Fourier transform infrared spectroscopy (FTIR) analysis revealed that carboxyl, amide and hydroxyl functional groups were mainly correlated with the sorption of Cu(II) and Cd(II). Energy dispersive X-ray (EDX) system analysis revealed that the ion-exchange was an important mechanism involved in the Cu(II) and Cd(II) sorption process taking place on EPS.     

Reduction of Cr(VI) by Desulfovibrio vulgaris and Microbacterium sp.

Many industrial wastes contain Cr(VI), a carcinogen and mutagen, the toxicity of which can be ameliorated by reduction to Cr(III). Microbacterium sp. NCIMB 13776 andDesulfovibrio vulgaris NCIMB 8303 reduced Cr(VI) to Cr(III) anoxically using 25 mM sodium citrate buffer (pH 7), with 25 mM sodium acetate and 25 mM sodium formate as electron donors at 30 °C, under which conditions the rates of reduction of 500 M sodium chromate were 77 and 6 nmol h^–1 mg dry cell wt for D. vulgaris and Microbacterium sp., respectively, these being increased to 127 and 17 nmol h^–1 mg dry cell wt in the presence of 20 mM MOPS/NaOH buffer.     

Chromium(VI) resistance and removal by <Emphasis Type="Italic">Acinetobacter haemolyticus</Emphasis>

The present work highlighted the studies on Cr(VI) reduction by cells of Acinetobacter haemolyticus (A. haemolyticus). The strain tolerated 90 mg Cr(VI) l⁻¹ in LB broth compared to only 30 mg Cr(VI) l⁻¹ in LB agar. From the FTIR analysis, the Cr(III) species formed was also most likely to form complexes with carboxyl, hydroxyl, and amide groups from the bacteria. A TEM study showed the absence of precipitates on the cell wall region of the bacteria. Instead, microprecipitates were observed in the cytoplasmic region of the cells, suggesting the transportation of Cr(VI) into the cells. Intracellular reduction of Cr(VI) was supported by a reductase test using soluble crude cell-free extracts. The specific reductase activity obtained was 0.52 μg Cr(VI) reduced per mg of protein an hour at pH 7.2 and 37°C. Our results indicated that A. haemolyticus can be used as a promising microorganism for Cr(VI) reduction from industrial wastewaters.     

Modulation of tolerance to Cr(VI) and Cr(VI) reduction by sulfate ion in a <Emphasis Type="Italic">Candida</Emphasis> yeast strain isolated from tannery wastewater

The main aim of this study was to investigate the influence of the sulfate ion on the tolerance to Cr(VI) and the Cr(VI) reduction in a yeast strain isolated from tannery wastewater and identified as Candida sp. FGSFEP by the D1/D2 domain sequence of the 26S rRNA gene. The Candida sp. FGSFEP strain was grown in culture media with sulfate concentrations ranging from 0 to 23.92 mM, in absence and presence of Cr(VI) [1.7 and 3.3 mM]. In absence of Cr(VI), the yeast specific growth rate was practically the same in every sulfate concentration tested, which suggests that sulfate had no stimulating or inhibiting effect on the yeast cell growth. In contrast, at the two initial Cr(VI) concentrations assayed, the specific growth rate of Candida sp. FGSFEP rose when sulfate concentration increased. Likewise, the greater efficiencies and volumetric rates of Cr(VI) reduction exhibited by Candida sp. FGSFEP were obtained at high sulfate concentrations. Yeast was capable of reducing 100% of 1.7 mM Cr(VI) and 84% of 3.3 mM Cr(VI), with rates of 0.98 and 0.44 mg Cr(VI)/L h, with 10 and 23.92 mM sulfate concentrations, respectively. These results indicate that sulfate plays an important role in the tolerance to Cr(VI) and Cr(VI) reduction in Candida sp. FGSFEP. These findings may have significant implications in the biological treatment of Cr(VI)-laden wastewaters.     

A bioprocessing strategy that allows for the selection of Cr(VI)-reducing bacteria from soils

Anaerobic bacteria that reduce hexavalent chromium [Cr(VI)] to trivalent [Cr(III)] are common in soils and were used to develop a bioprocess employing a selection strategy. Indigenous Cr(VI)-reducers were enriched from Cr(VI)-contaminated soil under anaerobic conditions. The mixed culture was then tested for Cr(VI)-reducing activity in a chemostat, followed by transfer to a 1-L packed-bed bioreactor operated at 30°C for additional study. The support material used in the reactor consisted of 6-mm porcelain saddles. Cr(VI) concentrations in the liquid ranged from 140–750 mg L⁻¹. Cr(VI)-reducing bacteria were the dominant population with Cr(VI)-reduction rates of approximately 0.71 mg g⁻¹ dry cells h⁻¹ achieved at Cr(VI) concentrations of 750 mg L⁻¹. These results indicate a potential for selecting and maintaining indigenous Cr(VI)-reducers in a bioreactor for Cr(VI)-remediation of groundwater or soil wash effluents. Received 09 January 1996/ Accepted in revised form 15 November 1996     

Red tide blooms of Cochlodinium polykrikoides in a coastal cove

Successive blooms of the dinoflagellate Cochlodinium polykrikoides occurred in Pettaquamscutt Cove, RI, persisting from September through December 1980 and again from April through October 1981. Cell densities varied from <100 cells L⁻¹ at the onset of the bloom and reached a maximum density exceeding 3.4 × 10⁶ cells L⁻¹ during the summer of 1981. The bloom was mainly restricted to the mid to inner region of this shallow cove with greatest concentrations localized in surface waters of the southwestern region during summer/fall periods of both years. Highly motile cells consisting of single, double and multiple cell zooids were found as chains of 4 and 8 cells restricted to the late August/September periods. The highest cell densities occurred during periods when annual temperatures were between 19 and 28 °C and salinities between 25 and 30. A major nutrient source for the cove was Crying Brook, located at the innermost region at the head of the cove. Inorganic nitrogen (NH₃ and NO₂ + NO₃) from the brook was continually detectable throughout the study with maximum values of 57.5 and 82.5 μmol L⁻¹, respectively. Phosphate (PO₄-P) was always present in the source waters and rarely <0.5 μmol L⁻¹; silicate always exceeded 30 μmol L⁻¹ with maximum concentrations reaching 226 μmol L⁻¹. Chlorophyll a and ATP concentrations during the blooms varied directly with cell densities. Maximum Chl a levels were 218 mg m⁻³ and ATP-carbon was >20 g C m⁻³. Primary production by the dinoflagellate-dominated community during the bloom varied between 4.3 and 0.07 g C m⁻³ d⁻¹. Percent carbon turnover calculated from primary production values and ATP-carbon varied from 6 to 129% d⁻¹. The dinoflagellates dominated the entire summer period; other flagellates and diatoms were present in lesser amounts. A combination of low washout rate due to the cove dynamics, active growth, and life cycles involving cysts allowed C. polykrikoides to maintain recurrent bloom populations in this area.