Thermodynamic study of forces involved in bovine serum albumin and ovalbumin partitioning in aqueous two-phase systems

The partitioning of bovine serum albumin and ovalbumin in different two-phase aqueous polymer systems is investigated using a thermodynamic approach. Systems used were polyethylene glycols (PEGs) of molecular weights 1000 to 10,000 Da and Dextran T500 (500,000 Da). Ovalbumin transfer to the top phase is exothermic, which suggests an electrostatic interaction between the hydroxyl groups of PEG and the hydrophilic side chain of the protein, whereas the bovine serum albumin partition is an endothermic process that is entropically driven, which coincides with its high surface hydrophobicity. The effect of PEG molecular weight on enthalpy and heat capacity changes, associated with the partition of both proteins, is examined on the basis of a preferential interaction of low-molecular-weight PEG with the protein surface.     

Role of polymer–protein interaction on partitioning pattern of bovine pancreatic trypsinogen and alpha-chymotrypsinogen in polyethyleneglycol/sodium tartrate aqueous two-phase systems

The partitioning pattern of bovine trypsinogen (TRPz) and alpha-chymotrypsinogen (ChTRPz) was investigated in a low impact aqueous two-phase system formed by polyethyleneglycol (PEG) and sodium tartrate (NaTart) pH 5.00. ChTRPz exhibited higher partition coefficients than TRPz did in all the assayed systems. The decrease in PEG molecular weight and the increase in tie line length were observed to displace the partitioning equilibrium of both proteins to the top phase, while phase volume ratios in the range 0.5–1.5 showed not to affect protein partitioning behaviour. Systems formed by PEG of molecular weight 600 with composition corresponding to a high tie line length (PEG 12.93%, w/w and NaTart 21.20%, w/w) are able to recover most of both zymogens in the polymer-enriched phase. A crucial role of PEG–protein interaction in the partitioning mechanism was evidenced by isothermal calorimetric titrations. The major content of highly exposed tryptophan rests, present in ChTRPz molecule, could be considered to be determinant of its higher partition coefficient due to a selective charge transfer interaction with PEG molecule. A satisfactory correlation between partition coefficient and protein surface hydrophobicity was observed in systems formed with PEGs of molecular weight above 4000, this finding being relevant in the design of an extraction process employing aqueous two-phase systems.     

Effect of PEG and mPEG-anthracene on tRNA aggregation and particle formation

Poly(ethylene glycol) (PEG) and its derivatives are synthetic polymers with major applications in gene and drug delivery systems. Synthetic polymers are also used to transport miRNA and siRNA in vitro. We studied the interaction of tRNA with several PEGs of different compositions, such as PEG 3350, PEG 6000, and mPEG-anthracene under physiological conditions. FTIR, UV-visible, CD, and fluorescence spectroscopic methods as well as atomic force microscopy (AFM) were used to analyze the PEG binding mode, the binding constant, and the effects of polymer complexation on tRNA stability, aggregation, and particle formation. Structural analysis showed that PEG-tRNA interaction occurs via RNA bases and the backbone phosphate group with both hydrophilic and hydrophobic contacts. The overall binding constants of K(PEG?3350-tRNA)= 1.9 (±0.5) × 10(4) M(-1), K(PEG?6000-tRNA) = 8.9 (±1) × 10(4) M(-1), and K(mPEG-anthracene)= 1.2 (±0.40) × 10(3) M(-1) show stronger polymer-RNA complexation by PEG 6000 and by PEG 3350 than the mPEG-anthracene. AFM imaging showed that PEG complexes contain on average one tRNA with PEG 3350, five tRNA with PEG 6000, and ten tRNA molecules with mPEG-anthracene. tRNA aggregation and particle formation occurred at high polymer concentrations, whereas it remains in A-family structure.     

Analysis of polymer molecular weight distributions in aqueous two-phase systems.

The partitioning of proteins and other biomaterials between two aqueous phases containing polyethyleneglycol and dextran is a strong function of the molecular weight of the two polymers. Although both polymers are polydispersed (especially Dx) most theoretical treatments refer only to the average molecular weight (number or mass) and assume that the molecular weight distribution of each polymer is the same in both phases. In this work the molecular weight distribution of each polymer is the same in both phases. In this work the molecular weight distributions of four stock solutions of PEG (4000, 6000, 10,000 and 20,000) and four stock solutions of Dx (10,000, 40,000, 110,000 and 500,000) were measured using High Performance Gel Chromatography. The measurements were repeated on the phases formed by the polymer solutions after they were mixed and allowed to equilibrate. The molecular weight distribution of the Dx differed in the top and bottom phase; both differed from that of the stock solution. Although we believe that the molecular weight distribution for PEG also differs in the top and bottom phases, we were unable to determine this within the resolution of our instruments.     

Features of the acid protease partition in aqueous two-phase systems of polyethylene glycol-phosphate: chymosin and pepsin

The partitioning of chymosin (from Aspergilus niger) and pepsin (from bovine stomach) was carried out in aqueous-two phase systems formed by polyethyleneglycol-potassium phosphate. The effects of polymer concentration, molecular mass and temperature were analysed. The partition was assayed at pH 7.0 in systems of polyethyleneglycol of molecular mass: 1450, 3350, 6000 and 8000. Both proteins showed high affinity for the polyethyleneglycol rich phase. The increase of polyethyleneglycol concentration favoured the protein transfer to the top phase, suggesting an important protein-polymer interaction. Polyethyleneglycol proved to have a stabilizing effect on the chymosin and pepsin, increasing its protein secondary structure. This finding agreed with the enhancement of the milk clotting activity by the polyethyleneglycol. The method appears to be suitable as a first step for the purification of these proteins from their natural sources.     

Partitioning of individual flexible polymers into a nanoscopic protein pore

Polymer dynamics are of fundamental importance in materials science, biotechnology, and medicine. However, very little is known about the kinetics of partitioning of flexible polymer molecules into pores of nanometer dimensions. We employed electrical recording to probe the partitioning of single poly(ethylene glycol) (PEG) molecules, at concentrations near the dilute regime, into the transmembrane beta-barrel of individual protein pores formed from staphylococcal alpha-hemolysin (alphaHL). The interactions of the alpha-hemolysin pore with the PEGs (M(w) 940-6000 Da) fell into two classes: short-duration events (tau approximately 20 micro s), approximately 85% of the total, and long-duration events (tau approximately 100 micro s), approximately 15% of the total. The association rate constants (k(on)) for both classes of events were strongly dependent on polymer mass, and values of k(on) ranged over two orders of magnitude. By contrast, the dissociation rate constants (k(off)) exhibited a weak dependence on mass, suggesting that the polymer chains are largely compacted before they enter the pore, and do not decompact to a significant extent before they exit. The values of k(on) and k(off) were used to determine partition coefficients (Pi) for the PEGs between the bulk aqueous phase and the pore lumen. The low values of Pi are in keeping with a negligible interaction between the PEG chains and the interior surface of the pore, which is independent of ionic strength. For the long events, values of Pi decrease exponentially with polymer mass, according to the scaling law of Daoud and de Gennes. For PEG molecules larger than approximately 5 kDa, Pi reached a limiting value suggesting that these PEG chains cannot fit entirely into the beta-barrel.     

Through pore diameter in the cell wall of Chara corallina.

Determination of pore size of the cell wall of Chara corallina has been made by using the polyethylene glycol (PEG) series as the hydrophilic probing molecules. In these experiments, the polydispersity of commercial preparation of PEGs was allowed for. The mass share (gamma(p)) of polyethylene glycol preparation fractions penetrating through the pores was determined using a cellular 'ghost', i.e. fragments of internodal cell walls filled with a 25% solution of non-penetrating PEG 6000 and tied up at the ends. In water, such a 'ghost' developed a hydrostatic pressure close to the cell turgor which persisted for several days. The determination of gamma(p), for polydisperse polyethylene glycols with different average molecular mass (M) was calculated from the degree of pressure restoration after water was replaced by a 5-10% polymer solution. Pressure was recorded using a dynamometer, which measures, in the quasi-isometric mode, the force necessary for the partial compression of the 'ghost' in its small fragment. By utilizing the data on the distribution of PEG 1000, 1450, 2000, and 3350 fractions over molecular mass (M), it was found that gamma(p), for these polyethylene glycols corresponded to the upper limit of ML=800-1100 D (hydrodynamic radius of molecules, r(h)=0.85-1.05 nm). Thus, the effective diameter of the pores in the cell wall of Chara did not exceed 2.1 nm.     

Partitioning features of bovine trypsin and alpha-chymotrypsin in polyethyleneglycol-sodium citrate aqueous two-phase systems

The partitioning of bovine trypsin and alpha-chymotrypsin--proteases of similar physico-chemical properties--in different polyethyleneglycol/sodium citrate aqueous two-phase systems was investigated. The effect of different factors such as polyethyleneglycol molecular weight, pH, tie line length, temperature and the presence of an inorganic salt on the protein partition coefficient were analysed. Both a decrease in PEG molecular weight and an increase in pH led to a higher partition coefficient for both enzymes. Aqueous two-phase systems formed by PEG of molecular weight 3350 and citrate pH 5.2 showed the best separation capability which was enhanced in presence of sodium chloride 3%. The transfer of both proteins to the top phase was associated with negative enthalpic and entropic changes.     

Effect of polyethyleneglycol (PEG) on spontaneous and polymyxin B-induced histamine release from rat peritoneal mast cells

Mast cells were isolated from the peritoneal cavity of rat and purified by centrifugation in a gradient of Percoll. The spontaneous and polymyxin B-induced release of histamine was studied after preincubation of the cells with polyethyleneglycols (PEGs) of different molecular weight (200-20,000 dalton) and with fatty acid derivatives of PEG 6000. It was found that very low concentrations (less than 0.1%) of PEG 6000 reduced the spontaneous and polymyxin B-induced release of histamine to a greater extent than the same concentration of bovine serum albumin. The inhibition increased with the size of the PEGs, but was little affected by the presence of fatty acid ligand bound to PEG.     

Effect of salt additives on protein partition in polyethylene glycol–sodium sulfate aqueous two-phase systems

Partitioning of 15 proteins in polyethylene glycol (PEG)–sodium sulfate aqueous two-phase systems (ATPS) formed by PEG of two different molecular weights, PEG-600 and PEG-8000 in the presence of different buffers at pH 7.4 was studied. The effect of two salt additives (NaCl and NaSCN) on the protein partition behavior was examined. The salt effects on protein partitioning were analyzed by using the Collander solvent regression relationship between the proteins partition coefficients in ATPS with and without salt additives. The results obtained show that the concentration of buffer as well as the presence and concentration of salt additives affects the protein partition behavior. Analysis of ATPS in terms of the differences between the relative hydrophobicity and electrostatic properties of the phases does not explain the protein partition behavior. The differences between protein partitioning in PEG-600–salt and PEG-8000–salt ATPS cannot be explained by the protein size or polymer excluded volume effect. It is suggested that the protein–ion and protein–solvent interactions in the phases of ATPS are primarily important for protein partitioning.     

Use of chemically modified proteins to study the effect of a single protein property on partitioning in aqueous two-phase systems: Effect of surface hydrophobicity

Two different series of hydrophobically modified proteins were partitioned in a number of aqueous two-phase systems (ATPS) to investigate the effect of hydrophobicity as a single property on partitioning. The modified proteins were derived from beta-lactoglobulin and bovine serum albumin (BSA). Measurement of the surface hydrophobicity of the proteins is important; hydrophobic interaction chromatography (HIC) was used for this purpose. The resolution of the systems (R) in terms of protein surface hydrophobicity and the intrinsic hydrophobicity (log P(0)) of the systems was established. The effect of the addition of NaCl to PEG/phosphate and PEG/dextran systems was analyzed in terms of the hydrophobicity difference between the phases and their ability to promote hydrophobic interactions between the protein surface and the PEG molecules. The values for R and log P(0) differed somewhat depending on which group of modified proteins was used for partitioning. The addition of NaCl to PEG/phosphate systems promoted an increase in the values of R, showing an important effect on the resolution of the systems for protein surface hydrophobicity (twice as high when compared with systems without NaCl). For PEG/dextran systems, the addition of 9% NaCl (w/w) promoted an improvement in the resolution toward surface hydrophobicity with an increase of 60% on the value of R. (c) 1996 John Wiley & Sons, Inc.     

Polyethyleneglycol molecular mass and polydispersivity effect on protein partitioning in aqueous two-phase systems

The partitioning of model proteins (bovine serum albumin, ovalbumin, trypsin and lysozyme) was assayed in aqueous two-phase systems formed by a salt (potassium phosphate, sodium sulfate and ammonium sulfate) and a mixture of two polyethyleneglycols of different molecular mass. The ratio between the PEG masses in the mixtures was changed in order to obtain different polymer average molecular mass. The effect of polymer molecular mass and polydispersivity on the protein partition coefficient was studied. The relationship between the logarithm of the protein partition coefficient and the average molecular mass of the phase-forming polymer was found to depend on the polyethyleneglycol molecular mass, the salt type in the bottom phase and the molecular weight of the partitioned protein. The polymer polydispersivity proved to be a very useful tool to increase the separation between two proteins having similar isoelectrical point.     

Soft perforation of planar bilayer lipid membranes of dipalmitoylphosphatidylcholine at the temperature of the phase transition from the liquid crystalline to the gel state

In contrast to the widely used method of electroporation, the method of soft perforation of lipid bilayers is proposed. It is based on the structural rearrangement of the lipid bilayer formed from disaturated phospholipids at the temperature of the phase transition from the liquid crystalline state to the gel state. This allows us to obtain a lipid pore population without the use of a strong electric field. It is shown that the planar lipid bilayer membrane (pBLM) formed from dipalmitoylphosphatidylcholine in 1 M LiCl aqueous solution exhibits the appearance of up to 50 lipid pores per 1 mm² of membrane surface, with an average single pore conductivity of 31±13 nS. The estimation of a single pore radius carried out with water-soluble poly(ethylene glycol)s (PEGs) showed that the average pore radius ranged between 1.0–1.7 nm. It was found experimentally that PEG-1450, PEG-2000, and PEG-3350 should be in a position to block the single pore conductivity completely, while PEG-6000 fully restored the ionic conductivity. The similarity of these PEG effects to ionic conductivity in protein pores makes it possible to suggest that the partition of the PEG molecules between the pore and the bulk solution does not depend on the nature of the chemical groups located in the pore wall.     

Aggregation of human RBC in binary dextran-PEG polymer mixtures

The present study was prompted by prior reports suggesting that small polymers can affect RBC aggregation induced by large macromolecules. Human RBC were washed and re-suspended in isotonic buffer solutions containing 72.5 kDa dextran (DEX 70, 2 g/dl) or 35.0 kDa poly(ethylene glycol) (PEG 35, 0.35 g/dl), then tested for aggregation in these solutions with and without various concentrations of smaller dextrans (10.5 and 18.1 kDa) or PEGs (3.35, 7.5 and 10.0 kDa). RBC aggregation was measured at stasis and at low shear using a photometric cone-plate system (Myrenne Aggregometer) and RBC electrophoretic mobility (EPM) in the various polymer solutions via an automated system (E4, HaSoTec GmbH). Our results indicate: (1) a heterogeneous effect with greater reduction of aggregation for small PEGs added to DEX 70 or for small dextrans added to PEG 35 than for small polymers of the same species; (2) for cells in DEX 70, aggregation decreased with increasing molecular mass and concentration of the small dextrans or PEGs; (3) for cells in PEG 35, small dextrans decreased aggregation with increasing molecular mass and concentration, whereas small PEGs had minimal effects with a minor influence of concentration and an inverse association between molecular mass and inhibition of aggregation. RBC EPM results indicated the expected polymer depletion for cells in DEX 70 or PEG 35, and that small PEGs yielded greater EPM values than small dextrans for cells in PEG 35 whereas the opposite was true for cells in DEX 70. Interpretation of our results in terms of the depletion model for RBC aggregations appears appropriate, and our findings are consistent with the assumption that inhibition of aggregation occurs because of an increase of small molecules in the depletion region. Our results thus suggest the merit of further studies of red blood cell aggregation in binary polymer systems.     

High-performance liquid chromatographic determination of PEG 600 in human urine

Polyethylene glycols (PEGs) are non-ionic, water-soluble synthetic polymers which have been widely used for many applications. Since they are of very low toxicity and are readily excreted in urine, PEGs in the molecular weight range 400–6000 have been used extensively in the study of intestinal physiology in man. A high-performance liquid chromatographic (HPLC) method has been developed for the determination of PEG 600 in human urine, which includes a pre-column derivatisation step. The dibenzoate derivatives of PEG 600 can be quantitatively prepared, and this, coupled with ultraviolet detection at 230 nm, has greatly improved the limit of detection for the determination of PEGs by HPLC. A suitable extraction procedure has also been developed which enabled PEG levels in urine to be monitored with much greater sensitivity than any previously reported method.     

Biosynthesis,properties and potential of natural–synthetic hybrids of polyhydroxyalkanoates and polyethylene glycols

Chemical conjugation with poly(ethylene glycols) (PEGs) are established procedures to facilitate solubilisation of hydrophobic compounds. Such techniques for PEGylation have been applied to polyhydroxybutyrate. ‘BioPEGylation’ of such polyhydroxyalkanoates (PHAs) to form natural–synthetic hybrids has been demonstrated through the addition of PEGs to microbial cultivation systems. The strategic addition of certain PEGs not only supports hybrid synthesis but may also provide a technique for control of PHA composition and molecular mass, and by extension, their physico-mechanical properties. PHA composition and molecular mass control by PEGs is dependent upon the polyethers’ molecular mass, loading in the cultivation system, time of introduction and microbial species. Hybrid characterisation studies are in their infancy, but results to date suggest that PHA–PEG hybrids have subtle, but significant, differences in their physiochemical and material properties as a consequence of the PEGylation.     

Effects of polyethylene glycol on stability of alpha-chymotrypsin in aqueous ethanol solvent

The effects of polyethylene glycol (PEG) of different molecular weights (400, 2000, 6000, 12,000, 20,000, and 35,000) on the conformational stability and catalytic activity of alpha-chymotrypsin in 60% ethanol were studied. The inactivation caused by the organic solvent was not influenced by PEG 400. However, the PEGs with higher molecular weights up to 35,000 increased the stability of the enzyme, but this alpha-chymotrypsin stabilizing effect was molecular weight-independent. With increase of the molecular weight of PEG, a more stable tertiary structure of the enzyme was observed.     

Aqueous-aqueous two-phase systems composed of low molecular weight of polyethylene glycols and dextrans for counter-current chromatographic purification of proteins

New aqueous-aqueous two-phase systems composed of relatively low molecular weight polymers such as polyethylene glycol (PEG) (Mr: 1000-4000) and dextran (Mr: 10,000 and 40,000) were evaluated for purification of proteins by counter-current chromatography (CCC). The compositions of aqueous two-phase systems were optimized by measuring parameters such as viscosity and volume ratio between the two phases. CCC purification of a glucosyltransferase (GTF) from Streptococcus mutans (SM) cell-lysate was successfully demonstrated with a 7.5% PEG 3350-10% dextran T40 system containing 10mM potassium phosphate buffer at pH 9.0. After CCC purification, both PEG and dextran contained in the CCC fractions were easily removed by ultrafiltration in a short period of time. The fractionated column contents containing GTF were analyzed by enzymatic activity as well as sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. The recovery of the enzyme from CCC fraction was over 95% as estimated by enzymatic activities.     

PEG blocking of single pores arising on phase transitions in unmodified lipid bilayers

Changes in ionic permeability of bilayer lipid membranes (BLM) from dipalmitoyl phosphatidylcholine at temperature of phase transition in 1 M LiCl solution in the presence of polyethyleneglycols (PEG) of various molecular masses are studied. The transition of ionic membrane channels from conducting to blocked nonconducting state using polymers makes it possible to calibrate lipid pores. It is shown that low-molecular weight glycerol and PEG with molecular weights of 300 and 600 decrease the amplitude of current fluctuations through the membrane, the decrease being proportional to the size of the polymer molecule incorporated. The addition of PEG with molecular masses of 1450, 2000, and 3350 decrease the current fluctuations to the basal noise level. The result is considered as a complete blockade of ion channel conductivity. In the presence of rather large polymers, such as PEG with molecular masses of 6000 and 20000, which are hardly incorporated in the pore, single current fluctuations occur again; however, their amplitudes are somewhat smaller than in the absence of PEG. It is assumed that a complete blockade of the conductivity of lipid ionic channels by PEG with molecular masses of 1450, 2000, and 3350 is due to dehydration of the pore gap and the conversion of the hydrophilic pore to a hydrophobic one.     

Isolation of alpha-1-antitrypsin from human plasma by partitioning in aqueous biphasic systems of polyethyleneglycol-phosphate

The partitioning of alpha-1-antitrypsin was assayed in biphasic aqueous systems containing potassium phosphate and two polyethyleneglycols of molecular mass 600 and 1000, respectively. In order to isolate the alpha-1-antitrypsin from serum plasma, the partitioning behaviour of human serum albumin, its principal contaminant, was also studied. Several aqueous two-phase systems with different partitioning properties were obtained by varying the PEG1000/PEG600 mass proportion. In systems with PEG1000/PEG600 mass ratio of 8, the optimal difference between the partition coefficients of both proteins was found. Under such conditions, a satisfactory purification was carried out by a three-step extraction procedure. By applying this method the alpha-1-antitrypsin specific activity increased severalfold (nearly 10 times) with a yield of 43%.