Label-free observation of three-dimensional morphology change of a single PC12 cell by digital holographic microscopy

Observation of three-dimensional (3D) morphology changes of a single mammalian cell is very useful to understand cell response for various stimuli. Conventional techniques to evaluate morphology changes with sufficient precision and high temporal resolution are limited. For example, the confocal fluorescence microscope is available to take 3D morphology changes, whereas fluorescence microscopic observation requires labeling the cells with fluorescence dye. Recently, a novel imaging method based on digital holography was developed for nonlabeling microscopic observation of 3D morphology. Digital holographic microscopy has high potentiality in digital focusing properties, video-frequency capability, noninvasive operation, and so forth. It obtains a quantitative phase image of a living cell from a single recorded hologram, with interferometric accuracy, and surveys the rapid morphology change of a single cell. In this study, digital holographic microscopy was applied to monitor the 3D morphology change of an individual PC12 cell, a nerve model cell, subjected to high K(+) stimulation. Phase images of the rapidly swelling cell were acquired, and time lapse reconstruction of 3D cell morphology was performed from phase images. Our results demonstrate that digital holographic imaging is a powerful new tool for evaluation of cell response against various stimulants without any labeling reagent.     

Towards 3D modelling and imaging of infection scenarios at the single cell level using holographic optical tweezers and digital holographic microscopy

The analysis of dynamic interactions of microorganisms with a host cell is of utmost importance for understanding infection processes. We present a biophotonic holographic workstation that allows optical manipulation of bacteria by holographic optical tweezers and simultaneously monitoring of dynamic processes with quantitative multi‐focus phase imaging based on self‐interference digital holographic microscopy. Our results show that several bacterial cells, even with non‐spherical shape, can be aligned precisely on the surface of living host cells and localized reproducibly in three dimensions. In this way a new label‐free multipurpose device for modelling and quantitative analysis of infection scenarios at the single cell level is provided. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Quantitative Stain-Free and Continuous Multimodal Monitoring of Wound Healing In Vitro with Digital Holographic Microscopy

Impaired epithelial wound healing has significant pathophysiological implications in several conditions including gastrointestinal ulcers, anastomotic leakage and venous or diabetic skin ulcers. Promising drug candidates for accelerating wound closure are commonly evaluated in in vitro wound assays. However, staining procedures and discontinuous monitoring are major drawbacks hampering accurate assessment of wound assays. We therefore investigated digital holographic microscopy (DHM) to appropriately monitor wound healing in vitro and secondly, to provide multimodal quantitative information on morphological and functional cell alterations as well as on motility changes upon cytokine stimulation. Wound closure as reflected by proliferation and migration of Caco-2 cells in wound healing assays was studied and assessed in time-lapse series for 40 h in the presence of stimulating epidermal growth factor (EGF) and inhibiting mitomycin c. Therefore, digital holograms were recorded continuously every thirty minutes. Morphological changes including cell thickness, dry mass and tissue density were analyzed by data from quantitative digital holographic phase microscopy. Stimulation of Caco-2 cells with EGF or mitomycin c resulted in significant morphological changes during wound healing compared to control cells. In conclusion, DHM allows accurate, stain-free and continuous multimodal quantitative monitoring of wound healing in vitro and could be a promising new technique for assessment of wound healing.     

Microfabricated platform for studying stem cell fates

Platforms that allow parallel, quantitative analysis of single cells will be integral to realizing the potential of postgenomic biology. In stem cell biology, the study of clonal stem cells in multiwell formats is currently both inefficient and time-consuming. Thus, to investigate low-frequency events of interest, large sample sizes must be interrogated. We report a simple, versatile, and efficient micropatterned arraying system conducive to the culture and dynamic monitoring of stem cell proliferation. This platform enables: 1) parallel, automated, long-term ( approximately days to weeks), live-cell microscopy of single cells in culture; 2) tracking of individual cell fates over time (proliferation, apoptosis); and 3) correlation of differentiated progeny with founder clones. To achieve these goals, we used microfabrication techniques to create an array of approximately 10,000 microwells on a glass coverslip. The dimensions of the wells are tunable, ranging from 20 to >500 microm in diameter and 10-500 microm in height. The microarray can be coated with adhesive proteins and is integrated into a culture chamber that permits rapid (approximately min), addressable monitoring of each well using a standard programmable microscope stage. All cells share the same media (including paracrine survival signals), as opposed to cells in multiwell formats. The incorporation of a coverslip as a substrate also renders the platform compatible with conventional, high-magnification light and fluorescent microscopy. We validated this approach by analyzing the proliferation dynamics of a heterogeneous adult rat neural stem cell population. Using this platform, one can further interrogate the response of distinct stem cell subpopulations to microenvironmental cues (mitogens, cell-cell interactions, and cell-extracellular matrix interactions) that govern their behavior. In the future, the platform may also be adapted for the study of other cell types by tailoring the surface coatings, microwell dimensions, and culture environment, thereby enabling parallel investigation of many distinct cellular responses.     

Real-time online monitoring of insect cell proliferation and baculovirus infection using digital differential holographic microscopy and machine learning

Real-time, detailed online information on cell cultures is essential for understanding modern biopharmaceutical production processes. The determination of key parameters, such as cell density and viability, is usually based on the offline sampling of bioreactors. Gathering offline samples is invasive, has a low time resolution, and risks altering or contaminating the production process. In contrast, measuring process parameters online provides more safety for the process, has a high time resolution, and thus can aid in timely process control actions. We used online double differential digital holographic microscopy (D3HM) and machine learning to perform non-invasive online cell concentration and viability monitoring of insect cell cultures in bioreactors. The performance of D3HM and the machine learning model was tested for a selected variety of baculovirus constructs, products, and multiplicities of infection (MOI). The results show that with online holographic microscopy insect cell proliferation and baculovirus infection can be monitored effectively in real time with high resolution for a broad range of process parameters and baculovirus constructs. The high-resolution data generated by D3HM showed the exact moment of peak cell densities and temporary events caused by feeding. Furthermore, D3HM allowed us to obtain information on the state of the cell culture at the individual cell level. Combining this detailed, real-time information about cell cultures with methodical machine learning models can increase process understanding, aid in decision-making, and allow for timely process control actions during bioreactor production of recombinant proteins.     

Study of the time effect on the strength of cell-cell adhesion force by a novel nano-picker

Cell’s adhesion is important to cell’s interaction and activates. In this paper, a novel method for cell–cell adhesion force measurement was proposed by using a nano-picker. The effect of the contact time on the cell–cell adhesion force was studied. The nano-picker was fabricated from an atomic force microscopy (AFM) cantilever by nano fabrication technique. The cell–cell adhesion force was measured based on the deflection of the nano-picker beam. The result suggests that the adhesion force between cells increased with the increasing of contact time at the first few minutes. After that, the force became constant. This measurement methodology was based on the nanorobotic manipulation system inside an environmental scanning electron microscope. It can realize both the observation and manipulation of a single cell at nanoscale. The quantitative and precise cell–cell adhesion force result can be obtained by this method. It would help us to understand the single cell interaction with time and would benefit the research in medical and biological fields potentially.     

Electron microscopy of trypanosomes--a historical view

Since the discovery of the electron microscope and the development of the initial techniques for the processing of biological samples for electron microscopy, the protozoan Trypanosoma cruzi has been the subject of intense investigation. This review analyzes the results obtained by observation of whole trypanosomes as well as thin sections and replicas using several microscopic approaches. Micrographs detailing the appearance of T. cruzi using several methods illustrate the evolution of electron microscopic techniques as well as its contribution to understanding the structural organization of the protozoan.     

A high-yield technique for preparing cells fixed in suspension for scanning electron microscopy

Human leukocytes fixed in suspension were allowed to settle onto poly-L-lysine-coated glass coverslips and prepared for observation with the scanning electron microscope (SEM). The coverslips were dehydrated in ethanol, critical point dried with CO2, and coated with gold-palladium. With the aid of a locator grid, several fields were photographed with light microscopy after the cells had settled onto the poly-L-lysine-coated coverslips and again after completion of the processing before SEM observation. Quantitative comparison of the number of cells present after settling with the number retained for final viewing with the SEM revealed a cell yield approaching 100%. This simple, reproducible, high-yield technique for processing cells fixed in suspension for SEM prevents changes in surface architecture induced by collecting live cells onto various substrates before fixation and also avoids potentially selective cell losses. Such a technique should allow quantitative correlations between SEM and other morphological and functional parameters.     

Calibration of Wide-Field Deconvolution Microscopy for Quantitative Fluorescence Imaging

Deconvolution enhances contrast in fluorescence microscopy images, especially in low-contrast, high-background wide-field microscope images, improving characterization of features within the sample. Deconvolution can also be combined with other imaging modalities, such as confocal microscopy, and most software programs seek to improve resolution as well as contrast. Quantitative image analyses require instrument calibration and with deconvolution, necessitate that this process itself preserves the relative quantitative relationships between fluorescence intensities. To ensure that the quantitative nature of the data remains unaltered, deconvolution algorithms need to be tested thoroughly. This study investigated whether the deconvolution algorithms in AutoQuant X3 preserve relative quantitative intensity data. InSpeck Green calibration microspheres were prepared for imaging, z-stacks were collected using a wide-field microscope, and the images were deconvolved using the iterative deconvolution algorithms with default settings. Afterwards, the mean intensities and volumes of microspheres in the original and the deconvolved images were measured. Deconvolved data sets showed higher average microsphere intensities and smaller volumes than the original wide-field data sets. In original and deconvolved data sets, intensity means showed linear relationships with the relative microsphere intensities given by the manufacturer. Importantly, upon normalization, the trend lines were found to have similar slopes. In original and deconvolved images, the volumes of the microspheres were quite uniform for all relative microsphere intensities. We were able to show that AutoQuant X3 deconvolution software data are quantitative. In general, the protocol presented can be used to calibrate any fluorescence microscope or image processing and analysis procedure.     

Quantifying estrogen and progesterone receptor expression in breast cancer by digital imaging.

Developments in digital imaging and fluorescent microscopy provide a new method and opportunities for quantification of protein expression in human tissue. Archived collections of paraffin-embedded tumors can be used to study the relationship between quantitative differences in protein expression in tumors and patient outcome. In this report we describe the use of a DeltaVision Restoration deconvolution microscope, combined with fluorescent immunohistochemistry, to obtain reproducible and quantitative estimates of protein expression in a formalin-fixed paraffin-embedded tissue. As proof of principle, we used antibodies to the estrogen and progesterone receptors in a hormone receptor-positive breast cancer specimen. We provide guidelines for control of day-to-day variability in camera and microscope performance to ensure that image acquisition leads to reproducible quantitative estimates of protein expression. We show that background autofluorescence related to formalin fixation can be controlled and that for proteins that are expressed in nearly every cell, multiplexing two primary antibodies on the same slide does not significantly affect the results obtained. We demonstrate that for proteins whose expression varies markedly from cell to cell, data reproducibility, as assessed by imaging successive tissue sections, is more difficult to determine.     

Multidepth screening of living cells using optical waveguides

The use of planar optical waveguides as substrata for label-free, non-invasive monitoring of cells growing on them is demonstrated. Different submicrometre depths (measured from and perpendicular to the substratum surface) can be selected for monitoring. The so-called symmetry waveguide configuration with a low refractive index waveguide support (nanoporous silica with refractive index approximately 1.2) and a polystyrene waveguiding film with a heat-embossed grating coupler is exploited to obtain practically useful differences between the penetration depths of different waveguide modes. Robust data processing techniques are developed to obtain quantitative information about the cell refractive index profile perpendicular to the substratum from the measured effective refractive indices of the modes. In particular, a method is introduced with which cell refractive index variations above and below a predefined and tunable depth can be separated using two modes. The technique can be extended to more modes to gain even more comprehensive information from predefined submicrometre slices of the cell layer. The introduced methods are also suitable for monitoring the kinetics of changes in cell refractive index profiles.     

Cell volume changes during apoptosis monitored in real time using digital holographic microscopy

Cellular volume changes play important roles in many processes associated with the normal cell activity, as well as various diseases. Consequently, there is a considerable need to accurately measure volumes of both individual cells and cell populations as a function of time. In this study, we have monitored cell volume changes in real time during apoptosis using digital holographic microscopy. Cell volume changes were deduced from the measured phase change of light transmitted through cells. Our digital holographic experiments showed that after exposure to 1 μM staurosporine for 4 h, the volumes of KB cells were reduced by ~50-60%, which is consistent with previous results obtained using electronic cell sizing and atomic force microscopy. In comparison with other techniques, digital holographic microscopy is advantageous because it employs noninvasive detection, has high time resolution, real time measurement capability, and the ability to simultaneously investigate time-dependent volume changes of both individual cells and cell populations.     

A quantitative 3D motility analysis of Trypanosoma brucei by use of digital in-line holographic microscopy

We present a quantitative 3D analysis of the motility of the blood parasite Trypanosoma brucei. Digital in-line holographic microscopy has been used to track single cells with high temporal and spatial accuracy to obtain quantitative data on their behavior. Comparing bloodstream form and insect form trypanosomes as well as mutant and wildtype cells under varying external conditions we were able to derive a general two-state-run-and-tumble-model for trypanosome motility. Differences in the motility of distinct strains indicate that adaption of the trypanosomes to their natural environments involves a change in their mode of swimming.     

Comparison of protein A-gold and ferritin immunoelectron microscopy of Semliki Forest virus in mouse brain using a rapid processing technique

Processing tissue for transmission electron microscopy by standard laboratory methods can take two to three days. This makes the development of new techniques time consuming and generally restricts the use of the electron microscope in routine diagnostic work. The possibility of viewing tissue with the electron microscope five hours after sampling using rapid processing techniques is presented. The morphology of the tissue appears undamaged with cell and organelle ultrastructures being readily recognized, as is the presence of virus and its replicating stages. When combined with immunoelectron microscopy a rapid labeling protocol is possible. We have used the technique to develop protein A-gold (6 and 16 nm particles) and ferritin immunoelectron microscopic techniques to demonstrate viral antigens in brain cell cultures and brain tissue from mice infected with Semliki Forest virus.     

The effect of overabundant projection directions on 3D reconstruction algorithms

The experimental process of collecting images from macromolecules in an electron microscope is such that it does not allow for prior specification of the angular distribution of the projection images. As a consequence, an uneven distribution of projection directions may occur. Concerns have been raised recently about the behavior of 3D reconstruction algorithms for the case of unevenly distributed projections. It has been illustrated on experimental data that in the case of a heavily uneven distribution of projection directions some algorithms tend to elongate the reconstructed volumes along the overloaded direction so much as to make a quantitative biological analysis impossible. In answer to these concerns we have developed a strategy for quantitative comparison and optimization of 3D reconstruction algorithms. We apply this strategy to quantitatively analyze algebraic reconstruction techniques (ART) with blobs, simultaneous iterative reconstruction techniques (SIRT) with voxels, and weighted backprojection (WBP). We show that the elongation artifacts that had been previously reported can be strongly reduced. With our specific choices for the free parameters of the three algorithms, WBP reconstructions tend to be inferior to those obtained with either SIRT or ART and the results obtained with ART are comparable to those with SIRT, but at a very small fraction of the computational cost of SIRT.     

Three-dimensional multiple-wavelength fluorescence microscopy for the structural analysis of biological phenomena.

Cellular events are accomplished by the coordinated interactions of cellular components within the three-dimensional context of a cell. Simultaneous observation of multiple components in three dimensions can be essential for understanding such interactions. Toward this end, we have developed a computerized microscope workstation capable of recording three-dimensional images of multiple cellular components in fixed and living cells. All aspects of microscope control, data collection, image processing and analysis can be performed on the one workstation. In this report, we describe the components and capabilities of this integrated system. In addition, we discuss some general problems of multiple-wavelength, three-dimensional imaging and our application of this technology to the analysis of chromosome organization in Drosophila melanogaster. Three-dimensional imaging of fixed embryos stained by indirect immunofluorescence has revealed the structural organization of chromosomes, microtubules, and the nuclear lamins. Imaging of living embryos injected with fluorescently labelled proteins has confirmed and extended these results by allowing the study of these structures throughout the cell cycle. The combination of the molecular specificity of fluorescence microscopy and the three-dimensional structural information obtained by our workstation has provided novel insights into the dynamic aspects of chromosome behavior during the cell cycle. We believe this system has many important applications in the study of the molecular basis of cellular events.     

Potential of 2D crosslinked sericin membranes with improved biostability for skin tissue engineering

Silk sericin protein is a natural, hydrophilic, macromolecular glycoprotein mainly synthesized in the middle silk gland of the silkworm. It constitutes 25–30% of the silk cocoon. Sericin proteins have antioxidant, antimicrobial, UV-resistant properties, promote wound healing and support cell proliferation even in serum-free media. Most of the sericin is discarded as waste in silk processing industries. This study aims at improving the mechanical strength and stability of sericin extracted from the silk cocoons during processing and utilize it as a biocompatible natural biopolymer in biomedical applications. Crosslinked sericin membranes, from the cocoon of non-mulberry tropical silkworm, Antheraea mylitta, were prepared using gluteraldehyde as the crosslinking agent. Physical and structural characteristics of the membranes were analyzed using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy and X-ray diffraction along with swelling and degradation studies. The secondary structure of the membrane indicates that crosslinking provides a more integrated structure that significantly improves the stability and mechanical strength of the membranes. In vitro cytocompatibility of the membranes was evaluated by MTT assay and cell cycle analysis of feline fibroblast cells. The adherence, growth and proliferation patterns of cells on membranes were assessed by confocal microscopy, which demonstrated that the latter is non-toxic and supports cell growth. Cell cycle analyses indicate cytocompatibility with normal cell cycle pattern. This study reveals that silk sericin protein can be used as a biocompatible natural biopolymer for various applications in the biomedical field.