Intermolecular recE4-independent recombination in Bacillus subtilis: formation of plasmid pKBT1

Summary The plasmid pKBT1 was derived by in vivo recE4-independent recombinational event(s) yielding a structure containing regions of plasmid and chromosomal origin. BamHI digests of plasmid pUB110 (Kan^r/Neo^r) and Bg/II digests of pTL12 (Tmp^r, leuA) were mixed, ligated and used to transform competent cells of a recE4 strain of Bacillus subtilis. Kanamycin-resistant transformants were electrophoretically screened for hybrid plasmids. Plasmid pKBT1 (8.0 kb) was smaller than pTL12 (10.4 kb) but larger than monomeric pUB110 (4.5 kb). Plasmid PKBT1 was stably maintained in recE4 strains of B. subtilis and conferred kanamycin resistance but did not specify trimethoprim resistance or leucine prototrophy. At least 86% of the pUB110 monomer length was present in pKBT1 and was completely contained within a single 5.58 kb HindIII fragment. The other segment of pKBT1 was of chromosomal origin as evidenced by lack of homology to pTL12 and strong hybridization to B. subtilis chromosomal DNA. At least one of the in vivo recE4-independent event(s) which produced pKBT1 must have involved intermolecular recombination between transforming and chromosomal DNA. This finding differs from previous reports in which recE4-independent recombination involving pUB110 sequences was a strictly intramolecular event.     

Restriction and modification in Bacillus subtilis Marburg 168: target sites and effects on plasmid transformation

Summary The effects of the restriction system of Bacillus subtilis strain M on plasmid transformation were studied. Plasmid pHV1401 DNA prepared from B. subtilis transformed the restriction-proficient M strain 100 times more efficiently than the DNA prepared from Escherichia coli, while the two DNA preparations transformed restriction-deficient derivatives of that strain with similar efficiencies. This indicates that transformation with pHV1401 is sensitive to the M restriction system. pHV1401 contains three CTCGAG (XhoI sites). Successive removal of these abolished the effect of restriction. This indicates that the XhoI sites are the targets for the M restriction system.Abbreviations used Ap^r resistance to ampicillin - Cm^r resistance to chloramphenicol - R/M restriction and modification - Tc^r resistance to tetracycline     

A novel method for the rapid cloning in Escherichia coli of Bacillus subtilis chromosomal DNA adjacent to Tn917 insertions

Summary A rapid and general procedure has been devised for the pBR322-mediated cloning in Escherichia coli of Bacillus subtilis chromosomal DNA extending in a specified direction from any Tn917 insertion. Derivatives of Tn917 have been constructed that contain a pBR322-derived replicon, together with a chloramphenicol-resistance (Cm^r) gene of Gram-positive origin (selectable in B. subtilis), inserted by ligation in two orientations into a SalI restriction site located near the center of the transposon. When linearized plasmid DNA carrying such derivatives was used to transform to Cm^r B. subtilis bacteria already containing a chromosomal insertion of Tn917, the pBR322 sequences efficiently became integrated into the chromosomal copy of the transposon by homologous recombination. It was then possible to clone chromosomal sequences adjacent to either transposon insertion junction into E. coli, using a selection for ampicillin-resistance, by transforming CaCl₂-treated cells with small amounts of insert-containing DNA that had been digested with various restriction enzymes and then ligated at a dilute concentration. Because pBR322 sequences may be inserted by recombination in either orientation with respect to the transposon arms, a single restriction enzyme (such as EcoRi or SphI) that has a unique recognition site in pBR322 DNA may be used to separately clone chromosomal DNA extending in either direction from the site of any transposon insertion. A family of clones generated from the region of an insertional spo mutation (spoIIH::Tn917) was used in Southern hybridization experiments to verify that cloned material isolated with this procedure accurately reflected the arrangement of sequences present in the chromosome. Strategies are discussed for taking advantage of certain properties inherent in the structure of clones generated in this way to facilitate the identification and study of promoters of insertionally mutated genes.     

Restriction of plasmid-mediated transformation in Bacillus subtilis 168.

Summary When plasmids carrying leucine genes of Bacillus subtilis 168 were isolated from a restriction and modification deficient (r^-m^-) strain and used for transformation of a restricting strain B. subtilis 168 leu recE4, the number of transformants was greatly reduced. Transformation of a rec ⁺ strain (transformation by integration of the donor DNA into the chromosome) with the plasmids was not affected irrespective of whether the recipient carried the r⁺ or r^- phenotype. These results show that the plasmid-mediated transformation is subject to the host controlled restriction and suggest that r^-m^- strains should be used for construction of recombinant DNA molecules in B. subtilis 168.     

Construction of a colony bank of E. coli containing hybrid plasmids representative of the Bacillus subtilis 168 genome. Expression of functions harbored by the recombinant plasmids in B. subtilis.

Summary A collection of about 2500 clones containing hybrid plasmids representative of nearly the entire genome of B. subtilis 168 was established in E. coli SK1592 by using the poly(dA)·poly(dT) joining method with randomly sheared DNA fragments and plasmid pHV33, a bifunctional vector which can replicate in both E. coli and B. subtilis. Detection of cloned recombinant DNA molecules was based on the insertional inactivation of the Tc gene occurring at the unique BamHI cleavage site present in the vector plasmid.Thirty individual clones of the collection were shown to hybridize specifically with a B. subtilis rRNA probe. CCC-recombinant plasmids extracted from E. coli were pooled in lots of 100 and used to transform auxotrophic mutants of B. subtilis 168. Complementation of these auxotrophic mutations was observed for several markers such as thr, leuA, hisA, glyB and purB. In several cases, markers carried by the recombinant plasmids were lost from the plasmid and integrated into the chromosomal DNA. Loss of genetic markers from the hybrid plasmids did not occur when a rec ^- recipient strain of B. subtilis was used.Abbreviations Ap^R resistance to ampicillin - Tc^R resistance to tetracycline - Cm^R resistance to chloramphenicol - CCC covalently closed circular duplex - Mdal magadalton     

Overexpression of the cat-86 Gene Is Associated with Thermosensitivity in Bacillus subtilis

Bacillus subtilis harboring the cat-86 constitutive plasmid pPL708C2 with an ochre mutation at the 9th codon (terc 9) was sensitive to chloramphenicol (Cm^s) and exhibited relative thermostability when heated at 47°C. Reversion to chloramphenicol resistance (Cm^r) occurred at a frequency of 5.4 × 10⁻⁸. All of the plasmid Cm^r revertants tested were thermosensitive. Similarly, wild-type pPL708C2 present in B. subtilis also rendered the bacterium thermosensitive. When a nonsense mutation is introduced at codon 141, however, this terc 141 variant of pPL708C2 failed to thermosensitize B. subtilis. Another variant of pPL708C2 that produces intact yet catalytically inactive CAT-86 has both His-16 and His-17 at the active site replaced by Pro. Nevertheless, cells of B. subtilis carrying this variant were thermosensitive. Plasmid-free and pPL708C2-bearing strains did not exhibit differences in major heat shock proteins. Electron micrographs revealed a threefold increase of inclusion bodies present in a strain harboring pPL708C2 when compared with those in an isogenic plasmid-free strain. Received: 26 July 1999 / Accepted: 30 August 1999     

Molecular cloning with bifunctional plasmid vectors in Bacillus subtilis

Summary Cloning in Escherichia coli and Bacillus subtilis was carried out using the bifunctional plasmid pDH5060. B. subtilis chromosomal DNA and pDH5060 DNA were digested with either BamHI or SalI, then annealed, ligated, and transformed into E. coli SK2267. Transformants containing sequences ligated into the BamHI or SalI sites in the Tc^r gene of pDH5060 were selected directly using a modification of the fusaric acid technique. The BamHI and SalI clone banks contain about 250 and 140 B. subtilis fragments, respectively, with an average insert size of 8–9 Kbp in the BamHI and 4–5 Kbp in the SalI bank. The inserts ranged in size from 0.3 Kbp to greater than 20 Kbp. The vector used here therefore accepts inserts which are significantly larger than previously reported for other B. subtilis cloning systems. All individual cloned B. subtilis sequences examined were stably propagated in E. coli SK2267. Eight of eighteen B. subtilis auxotrophic markers tested (aroG, gltA, glyB, ilvA, metC, purA, pyrD, and thrA) were transformed to prototrophy with BamHI or SalI clone bank DNA. All or part of the hybrid plasmid DNA recombined at the sites of homology in the chromosome of these Rec⁺ recipients. Loss of sequences from hybrid plasmids was not prevented in a r ^- m ^- recE4 recipient strain of B. subtilis. Although the recE4 background prevented recombination between homologous chromosomal DNA, a variety of cloned fragments were shown to be unstable and undergo deletions of both insert and plasmid sequences. In addition, B. subtilis sequences propagated in E. coli transformed B. subtilis recE4 recipients with a 500-1,000-fold reduced efficiency.     

Stability of Integrated Plasmids in the Chromosome of Lactococcus lactis

Derivatives of plasmids pBR322, pUB110, pSC101, and pTB19, all containing an identical fragment of lactococcal chromosomal DNA, were integrated via a Campbell-like mechanism into the same chromosomal site of Lactococcus lactis MG1363, and the transformants were analyzed for the stability of the integrated plasmids. In all cases the erythromycin resistance gene of pE194 was used as a selectable marker. Transformants obtained by integration of the pBR322 derivatives contained a head-to-tail arrangement of several plasmid copies, which most likely was caused by integration of plasmid multimers. Single-copy integrations were obtained with the pSC101 and pTB19 derivatives. In all of these transformants no loss of the erythromycin gene was detected during growth for 100 generations in the absence of the antibiotic. In contrast, transformants containing integrated amplified plasmid copies of pUB110 derivatives were unstable under these conditions. Since pUB110 appeared to have replicative activity in L. lactis, we suggest that this activity destabilized the amplified structures in L. lactis.     

Transformation of the basidiomycete, Schizophyllum commune

Summary Protoplasts of aSchizophyllum commune tryptophan auxotroph (trp1), deficient in indole-3-glycerol phosphate synthetase (IGPS), were transformed to trp⁺ with plasmid DNA containing the SchizophyllumTRP1 sequence. Efficiencies up to 30 transformants per microgram of plasmid DNA were obtained. Southern blots reveal that the transforming DNA is integrated in chromosomal DNA. The trp⁺ phenotype of transformants is stable in meiosis and mitosis. Transformants possess IGPS activity comparable to wild-type cells.     

Functional substitution of the recE gene of Bacillus subtilis by the recA gene of Proteus mirabilis

Summary Rec mutants of Bacillus subtilis have been tested for complementation by the recA gene of Proteus mirabilis (recApm) which was introduced into B. subtilis via the plasmid pHP334. In the recE4 mutant of B. subtilis the plasmid pHP334 restored significantly the defects in RecE functions tested: UV-sensitivity, homologous recombination (transduction and transformation) and prophage induction.Although serological methods to detect the presence of RecApm protein in B. subtilis have been unsuccessful, our results strongly indicate that the recE function of B. subtilis is analogous to the recA function of P. mirabilis.Abbreviations Cm^r resistance to chloramphenicol - Em^r resistance to erythromycin - Tc^r resistance to tetracycline - SDS sodium dodecyl sulfate - UV ultraviolet - AS ammonium sulfate     

A bifunctional plasmid carrying the recA gene of E. coli

Summary To investigate the effect of an active, plasmid-carried recA gene on the stability and/or the expression of plasmid genes in different genetic backgrounds, we have constructed a bifunctional plasmid (able to replicate in Escherichia coli and in Bacillus subtilis). Chimeric plasmids were obtained by inserting pC194 (Ehrlich 1977) into pDR1453 (Sancar and Rupp 1979). pDR1453 is a 12.9 Kbp plasmid constructed by inserting an E. coli chromosome fragment carrying the recA gene into pBR322. The expected bifunctional recombinant (pMR22/1) (15.7 Kbp) was easily obtained but surprisingly the Cm resistance was expressed only at a very low level in E. coli (as compared, for example, to pHV14, pHV15). We attribute this effect to the presence of multiple recA genes in the cell. On the contrary, Cm^r E. coli transformants bear a recombinant plasmid (pMR22/n) containing tandemly repeated copies of pC194 in equilibrium with excised free pC194. Such amplification has never been observed in a Rec^- background and is therefore mediated by the recA genes. Growth of these clones in the absence of Cm causes the loss of the extra copies, yielding a plasmid with a single copy of pC194, indistingishable from pMR22/1. Interestingly, we have observed that deletions occur at high frequency in pC194, which drastically increase Cm^r in E. coli containing plasmids with a single copy of pC194. Two types of such deletions were detected: (a) large 1050 bp deletions covering about onethird of pC194 and (b) small 120–150 bp deletions (near the MspI site) in the region containing the replicative functions of pC194 (Horinouchi and Weisblum 1982). Both types of deletion render the recombinant plasmid unable to replicate in B. subtilis. pM22/1 replicates, although with a low copy-number, and is stable in B. subtilis wild type; the recA gene of E. coli does not complement any of the rec ^- mutations of B. subtilis. A strong instability, mainly of the E. coli and pBR322 sequences, was observed in many dna and rec mutants of B. subtilis yielding smaller plasmid with a much higher copy-number.     

Optimum Conditions for Electric Pulse-mediated Gene Transfer to Bacillus subtilis Cells

It was found that plasmid DNA (pUB 110) can be introduced into not only protoplasts but also intact cells of Bacillus subtilis by electric field pulses. The transformation of, B. subtilis using protoplasts results in an efficiency of 2.5 × 10⁴ transformants per μg of DNA, with a single pulse of 50 jisec with an initial electric field strength of 7kV/cm. Even transformation of intact B. subtilis cells results in a maximum efficiency of 1.5 × 10³ transformants per μg DNA, with a single pulse of 400 μsec with an initial electric field strength of 16kV/cm. The cell survival of protoplasts and intact cells was approximately 100% and 30%, respectively, under the conditions found to be optimal for the transformation process. Plasmid DNA isolated from pUB 110 containing transformants was indistinguishable from authentic preparations of pBU 110 on gel electrophoretic analysis.     

Direct plasmid transfer from replica-plated E. coli colonies to competent B. subtilis cells. Identification of an E. coli clone carrying the hisH and tyrA genes of B. subtilis

Summary We have cloned the hisH tyrA wild-type genes of Bacillus subtilis with the aid of the chimeric plasmid pBJ194, which replicates both in B. subtilis and Escherichia coli. Primary cloning was done in E. coli. The original E. coli clone, carrying the recombinant plasmid (pGR1) which complements hisH tyrA mutants of B. subtilis, was selected directly from a mixture of plated E. coli clones by replicaplating these clones onto minimal agar plates without tyrosine spread just before with competent B. subtilis cells. After overnight incubation clusters of small colonies had developed exclusively in the E. coli [pGR1] colony prints.The Tyr⁺ minicolonies were shown to be B. subtilis carrying pGR1 because (i) their appearance depended linearly on the number of B. subtilis cells plated, (ii) they produced extracellular protease and amylase and (iii) plasmids could be reisolated from the minicolonies and used to transform B. subtilis recE4 tyrA1 both to Cm^r and Tyr⁺.Plasmid pGR1 transfer through replica plating was compared with plasmid transfer in liquid. Both systems depended on transformable B. subtilis strains and were sensitive to DNAseI. However, whereas integration of the tyrA ⁺ gene into the chromosome and concomittant loss of plasmids occurred frequently during regular plasmid transformation of Rec⁺ B. subtilis, this was a rare event during plasmid transfer through replica plating.     

Interspecific plasmid transfer between Streptococcus pneumoniae and Bacillus subtilis

Summary The streptococcal plasmids pMV158 and pLS1, grown in Streptococcus pneumoniae, were transferred to Bacillus subtilis by DNA-mediated transformation. The plasmids were unchanged in the new host; no deletions were observed in 80 instances of transfer. Their copy number was similar to that in S. pneumoniae. Two B. subtilis plasmids, pUB110 and pBD6, could not be transferred to S. pneumoniae. Hybrid plasmids were produced by recombining the EcoRI fragment of pBD6 that confers Km^r with EcoRI-cut pLS1, which confers Tc^r. The simple hybrid, pMP2, was transferable to both species and expressed Tc^r and Km^r in both. A derivative, pMP5, which contained an insertion in the pBD6 component, expressed a higher level of kanomycin resistance and was more easily selected in S. pneumoniae. Another derivative, pMP3, which contained an additional EcoRI fragment, presumably of pneumococcal chromosomal DNA, could not be transferred to B. subtilis. Previous findings that monomeric plasmid forms could transform S. pneumoniae but not B. subtilis were confirmed using single plasmid preparations. Although plasmids extracted from either species were readily transferred to S. pneumoniae, successive passage in B. subtilis increased the ability of plasmid extracts to transfer the plasmid to a B. subtilis recipient. This adaptation was tentatively ascribed to an enrichment of multimeric forms in extracts of B. subtilis as compared to S. pneumoniae. A review of host ranges exhibited by plasmids of Gram-positive bacteria suggested differences in their ability to use particular host replication functions. The pMP5 plasmid, with readily selectable Km^r and Tc^r markers in both hosts, and with the potential for inactivation of Km^r by insertion in the Bg/II site, could be a useful shuttle vector for cloning in S. pneumoniae and B. subtilis.     

Study on the electro-transformation conditions of improving transformation efficiency for Bacillus subtilis

Aims: To optimize the transformation conditions and improve the transformation efficiency of Bacillus subtilis WB800 and DB104. Methods and Results: Trehalose, which could decrease the damage of electric shock to the cells, was added to the electroporation medium containing sorbitol and mannitol. The factors affecting the transformation efficiency, such as the growth phase of bacteria, cell concentration, electric field strength and plasmid variety, were examined and improved. The new method increased the transformation efficiency of B. subtilis by nearly 100‐fold compared with the conventional one. Conclusions: With the optimized method, the transformation efficiency came up to 3·64 × 10⁵ transformants μg^?1 DNA for WB800, and 2·10 × 10⁵ transformants μg^?1 DNA for DB104. Significance and Impact of the Study: This improvement in transformation efficiency will be largely attributed to the research of expression of exogenous genes in B. subtilis, gene library construction for directed evolution and transformation of wild‐type B. subtilis strains.     

High-Efficiency Transformation of Rhizobium leguminosarum by Electroporation

Electrotransformation of Rhizobium leguminosarum was successfully carried out with a 15.1-kb plasmid, pMP154 (Cm^r), containing a nodABC-lacZ fusion by electroporation. The maximum transformation efficiency, 10⁸ transformants/μg of DNA, was achieved at a field strength of 14 kV/cm with a pulse of 7.3 ms (186 Ω). The number of transformants was found to increase with increasing cell density, with no sign of saturation. In relation to DNA dosage, the maximum transformation efficiency (5.8 × 10⁸ transformants/μg of DNA) was obtained with 0.5 μg of DNA/ml of cell suspension, and a further increase in the DNA concentration resulted in a decline in transformation efficiency.     

An efficient transformation method for <Emphasis Type="Italic">Bacillus subtilis</Emphasis> DB104

Bacillus subtilis strains are used for extracellular expression of enzymes (i.e., proteases, lipases, and cellulases) which are often engineered by directed evolution for industrial applications. B. subtilis DB104 represents an attractive directed evolution host since it has a low proteolytic activity and efficient secretion. B. subtilis DB104 is hampered like many other Bacillus strains by insufficient transformation efficiencies (≤10³ transformants/μg DNA). After investigating five physical and chemical transformation protocols, a novel natural competent transformation protocol was established for B. subtilis DB104 by optimizing growth conditions and histidine concentration during competence development, implementing an additional incubation step in the competence development phase and a recovery step during the transformation procedure. In addition, the influence of the amount and size of the transformed plasmid DNA on transformation efficiency was investigated. The natural competence protocol is “easy” in handling and allows for the first time to generate large libraries (1.5 × 10⁵ transformants/μg plasmid DNA) in B. subtilis DB104 without requiring microgram amounts of DNA.     

Targeted integrative transformation of Candida tropicalis by electroporation

Summary A method for integrative transformation of the diploid yeast Candida tropicalis by electroporation has been developed. By linearizing the transforming plasmid DNA containing the URA3 gene prior to electroporation of recipient cells, its integration was targeted to a specific locus in the genome, resulting in single or multiple tandem integrations. The optimal electroporation conditions for this yeast were established and include an electric pulse of 2.25 kV/cm for a duration of 50 ms. Using these conditions, Ura⁺ transformants were readily obtained at a high frequency (45 transformants/g DNA) as the result of targeted integration of the URA3 gene containing plasmid DNA at the chromosomal ura3 locus. The number of transformants resulting from this procedure is comparable to that achieved with a recently reported spheroplast transformation procedure for C. tropicalis; in addition, it offers the advantages of being simple, rapid and reproducible.     

Specific pattern of instability of Escherichia coli HisG gene cloned in Bacillus subtilis via the Staphylococcus aureus plasmid pCS194

The plasmid pCS194, generated in vivo by recombination of two Staphylococcus aureus plasmids, pC194 and pS194, coding, respectively, for chloramphenicol (Cm) and streptomycin (Sm) resistance, can be replicated also in Bacillus subtilis in the presence of either of the two antibiotics. In their absence, no segregation of the individual components is observed, but the whole plasmid is lost at a rate of about 10% per generation. The unique EcoRI site of pCS194 is located in the Sm^R determinant. EcoRI-cleaved pCS194 has been joined to an EcoRI-linearized Escherichia coli replicon, the in vitro recombinant pHisG plasmid, composed of the vector pBR313 plus a BglII-segment of E. coli chromosomal DNA, containing a functional hisG gene. The ligation mixture has been used to transform either E. coli or B. subtilis. Following E. coli transformation and selection for Ap^R and Cm^R (the latter is expressed in E. coli by the pC194 determinant), two his⁺ clones were picked at random and the plasmids extracted. These appear identical and contain the original segments. Conversely, after transformation of B. subtilis and selection for Cm^R, only his^? clones have been obtained. From them, deleted plasmids have been extracted. They have lost part or, more frequently, all of the E. coli DNA insert. In the latter case also most of the bracketing pS194 sequence has been lost, and the resulting plasmids are almost identical to pC194, the Cm^R parent of pCS194. When the intact recombinant plasmids, isolated from his⁺ Ap^R Cm^RE. coli clones, have been used to transform B. subtilis cells for Cm^R, again deleted plasmids almost identical to pC194 have been obtained. The events causing these rearrangements occur after in vitro ligation, during either transformation or early propagation of the plasmids, and are probably caused by a translocatable element present in pCS194. A detailed physical map of pC194, carrying the restriction sites for HindIII, HaeIII, HpaII, MboII, AluI, HhaI, and BglI, is presented.