Protoplast-to-plant regeneration in cotton (Gossypium hirsutum L. cv. Coker 312) using feeder layers

Summary We report the regeneration of protoplasts isolated from two embryogenic cell lines of Gossypium hirsutum L. cv. Coker 312 initiated from hypocotylderived callus. Protoplasts plated on cellulose nitrate filters and placed over feeder layers formed embryogenic callus from which plants were regenerated. Plating efficiency up to 12.8% depended upon the cell line. Addition of phytohormones to the protoplast medium had no stimulating effect on plating efficiency. The influence of feeder cells and conditioned medium on plating efficiency was significantly different for the two cell lines.Abbreviations ACM autoclaved conditioned medium - AFC autoclaved feeder cells - BM basic medium - BM+ basic medium with phytohormones - CM non-autoclaved conditioned medium - FC non-autoclaved feeder cells - FDA fluorescein diacetate - MM maturation medium - NAA 1-naphtaleneacetic acid - PCM protoplast culture medium - PCM+ protoplast culture medium with phytohormones - SC settled cells - 2,4-D 2,4-dichlorophenoxyacetic acid - 6-BAP 6-benzylamino purine     

High frequency callus formation from maize protoplasts

Summary A solid feeder layer technique was developed to improve callus formation of Black Mexican Sweet maize (Zea mays L.) suspension culture protoplasts. Protoplasts were plated in 0.2 ml liquid media onto a cellulose nitrate filter on top of agarose-solidified media in which Black Mexican Sweet suspension feeder cells were embedded. Callus colony formation frequencies exceeding 10% of the plated protoplasts were obtained for densities of 10³–10⁵ protoplasts/ 0.2 ml, which was 100- to 1,000-fold higher than colony formation frequencies obtained for conventional protoplast plating methods such as liquid culture or embedding in agarose media. Compared with conventional methods, the feeder layer method gave higher colony formation frequencies for three independently maintained Black Mexican Sweet suspension lines. Differences among the three lines indicated that colony formation frequencies might also be influenced by the suspension culture maintenance regime and length of time on different 2,4-dichlorophenoxyacetic acid concentrations. The callus colony formation frequency reported is an essential prerequesite for recovering rare mutants or genetically transformed maize protoplasts.     

Plant regeneration from indica rice (Oryza sativa L.) protoplasts

Rice (Oryza sativa L.) plants of the indica cultivar IR54 were regenerated from protoplasts. Conditions were developed for isolating and purifying protoplasts from suspension cultures with protoplast yields ranging from 1·10⁶ to 15·10⁶ viable protoplasts/1 g fresh weight. Protoplast viability after purification was generally over 90%. Protoplasts were cultured in a slightly modified Kao medium in a Petri plate by placing them onto a Millipore filter positioned on top of a feeder (nurse) culture containing cells from a suspension culture of the japonica rice, Calrose 76. Plating efficiencies of protoplasts ranged from 0.5 to 3.0%; it was zero in the absence of the nurse culture. Protoplast preparations usually contained no contaminating cells, and when present, the number of cells never exceeded 0.1% of the protoplasts. After three weeks the Millipore filter with callus colonies were transferred off feeder cells and onto a Linsmaier and Skoog-type medium for an additional three weeks. Selected callus colonies that had embryo-like structures were then transferred to regeneration medium containing cytokinins, and regeneration frequencies up to 80% were obtained. Small shoots emerged and were transferred to jars for root development prior to transferring to pots of soil and growing the plants to maturity in growth chambers. Of the cytokinins evaluated, N⁶-benzylaminopurine was the most effective in promoting shoot formation; however, kinetin was also somewhat effective. Regeneration medium could be either an N₆ or Murashige and Skoog basal medium. Of 76 plants grown to maturity, 62 were fertile, and the plant heights averaged about three-fourths the height of seed-grown plants.Two other suspension cultures of IR54, one developed from the protoplast callus of the initial IR54 line, and the other developed from callus produced by mature seeds, have yielded protoplasts capable of regenerating plants when using cells of the Calrose 76 suspension as a nurse culture. In addition, protoplasts obtained from three-week-old primary callus of immature embryos of IR54 were capable of regenerating plants when using the same culture conditions.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - pcy packed cell volume - BAP N⁶-benzylaminopurine - FDA fluorescein diacetate - FW fresh weight - IAA indole-3-acetic acid Media AA Muller and Grafe (1978) - CPW Frearson et al. (1973) - Kao^* Kao (1977) - LS Linsmaier and Skoog (1965) - MS Murashige and Skoog (1962) - N₆ Chu et al. (1975) - PCM Ludwig et al. (1985)     

High frequency plant regeneration from protoplasts in cotton <Emphasis Type="Italic">via</Emphasis> somatic embryogenesis

A highly reproducible system for efficient plant regeneration from protoplast via somatic embryogenesis was developed in cotton (Gossypium hirsutum L.) cultivar ZDM-3. Embryogenic callus, somatic embryos and suspension culture cells were used as explants. Callus-forming frequency (82.86 %) was obtained in protoplast cultures from suspension culture cells in KM₈P medium with 0.45 μM 2,4-dichlorophenoxyacetic acid (2,4-D), 0.93 μM kinetin (KIN), 1.5 % glucose and 1.5 % maltose. Protocolonies formed in two months with plating efficiency of 14 %. However, the callus-forming efficiencies from other two explants were low. The calli from protoplast culture were transferred to somatic embryo induction medium and 12.7 % of normal plantlets were obtained on medium contained 3 % maltose or 1 % of each sucrose + maltose + glucose, 2.46 μM indole-3-butyric acid (IBA) and 0.93 μM KIN. Over 100 plantlets were obtained from protoplasts derived from three explants. The regenerated plants were transferred to the soil and the highest survival rate (95 %) was observed in transplanting via a new method.     

Plants Regenerated from Mesophyll Protoplasts of Cottonwood New Clone

Poplar NL-80106 (Populus deltoides×P, simonii) mesophyll protoplasts were isolated from leaves of 30 days-old sterile shoot, with 4 × 107/g fr. wt of protoplast yield after purification. The protoplasts were cultured in KM8p and MS liquid media containing 2 mg/L 2, 4-D, 0. 5 mg/L NAA and 0.5 mg/L KT. Higher plating density and lower osmatic pressure (0.45 mol/L) were proved to be favourable to division of protoplast-derived cells. The first division initiated 5 days after culture, and the division frequency reached 4.5 % on the 10th day. A number'of cell colonies and microcalli was formed in 12 weeks. Using organic nitrates and glucose in protoplast culture medium was beneficial to increase division frequency and plating efficiency. The calli were allowed to grow to 4--6 mm in height with red colour and compact structure on the gelrite-sohdified NLZ1 proliferation medium in 3 weeks and were transferred onto NLF differentiation medium where the frequency of shoot formation could reach 100%. The 3 cm high shoots were then cut off from the callus and rooted on 1/2 MS medium.     

Microcallus formation from maize protoplasts prepared from embryogenic callus

Conditions have been developed that induce maize (Zea mays L.) protoplasts to re-synthesize cell walls and to initiate cell divisions. Two types of embryogenic maize callus were used as a source of protoplasts: a heterogeneous callus (Type I) derived from immature embryos after three weeks in culture, and a friable, rapidly growing callus (Type II) selected from portions of the Type I callus. Many variables in the growth conditions of the donor tissue (type of medium, transfer schedule, age of callus), protoplast isolation solutions (pH, osmolarity, type and concentration of cell wall hydrolyzing enzymes, addition of polyamines) and conditions (amount of time in enzyme, amount of tissue per volume of enzyme incubation medium, agitation, preplasmolysis of source tissue, type of callus), and purification procedures (filtration and-or flotation), were found to affect both yield and viability of protoplasts (based upon fluorescein-diacetate staining). Our isolation procedure yielded high numbers of viable, uninucleated maize callus protoplasts which were densely cytoplasmic and varied in size from 20 to 50 m in diameter. Protoplasts plated in solid medium formed walls and divided several times. Of several gelling agents tested for protoplast propagation, only agarose resulted in protoplasts capable of sustained divisions leading to the formation of microcalli. Plating efficiency was established over a wide range of protoplast densities (10³–10⁷ protoplasts/ml). Highest plating efficiency (25%) was obtained at 1·10⁶ protoplasts/ml). The resulting microcalli grew to be dense clusters of about 0.1–0.5 mm in diameter and then stopped growing. Nurse cultures of maize and carrot (Daucus carota L.), were used to establish that individual protoplasts (not contaminating cells or cell clusters) formed walls and divided. Nurse cultures also increased the efficiency of microcallus formation from protoplasts.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - MS Murashige and Skoog (1962) salts - MS 1D Murashige and Skoog salts with 1 mg/l 2,4-D - MS 2D Murashige and Skoog salts with 2 mg/l 2,4-D - N₆ medium of Chu et al. (1975) - NN67-mod medium of Nitsch and Nitsch (1967) as modified in the present paper - FDA fluorescein diacetate - LMP low melting point     

Regeneration of haploid and dihaploid plants from protoplasts of supersweet (sh2sh2) corn

Summary Plants were regenerated from maize (Zea mays L.) protoplasts isolated from embryogenic cell suspensions. The donor maize suspension cultures were established from friable callus initiated from microspores of a commercial supersweet hybrid (sh2sh2). The frequency of cell colony formation was higher when protoplasts were cultured on feeder layers of maize cells as compared with a liquid thin layer method. It was demonstrated that haploid and dihaploid soil-grown plants can be regenerated from maize protoplasts isolated from haploid cell cultures.     

谷子胚性愈伤组织粘液提取物对原生质体培养的影响

将谷子胚性愈伤组织粘液提取物添加到谷子原生质体培养基中,其对原生质体培养的影响表明该提取物有助于原生质体形成细胞壁;并且该类有粘液分泌的念伤组织的原生质体游离所需的酶液浓度低、处理时间短。由原生质体形成完整细胞的数量在一定范围内与谷子原生质体培养的植板率相对应;通过增加形成完整细胞的数量可较大幅度地提高原生质体培养的植板率。     

Callus formation from protoplasts of cultured Lithospermum erythrorhizon cells

Protoplasts isolated from cell cultures of Lithospermum erythrorhizon divided repeatedly and formed callus colonies. Factors that affect protoplast division are the use of glucose as osmoticum, a new plating method with twin layers of agar-liquid medium, and the culture of protoplasts under the osmolarity lower than that in the isolation solution. When the sucrose in the protoplast-culture medium was replaced with glucose, and coconut milk was added to the medium, the frequency of colony formation markedly increased. The culture period required for colony formation also was shortened.     

Colony formation and plant regeneration from mesophyll protoplasts of Solanum etuberosum

A procedure for the culture of Solanum etuberosum mesophyll protoplasts with subsequent shoot regeneration is described. Several factors affected protoplast yield, colony formation, and shoot regeneration from in vitro plants. A protoplast isolation medium with 0.6 M sucrose produced twice the yield as one with 0.3 M sucrose. uowever, a higher concentration of osmoticum was inhibitory to colony development unless it was diluted into a lower osmoticum medium in a bilayer system. A 16 hour light/8 hour dark photoperiod for stock plants allowed twice the protoplast yield compared to plants grown under continuous light but no effect was found on subsequent colony formation or shoot regeneration. The concentrations of four major salts in the protoplast plating medium were critical for a high frequency of colony formation from protoplasts. Levels of 0.25 × or 1 × were considerably better than 4 ×. Fast colony formation, but at a lower efficiency, was obtained with a monolayer plating method. A bilayer plating system allowed a higher efficiency but colonies developed more slowly. For the best treatments, the frequency of colony formation from protoplasts ranged from 2.4 to 3.6 × 10^-3 with 37% to 66% of the colonies producing shoots ten weeks after protoplast isolation.Cooperative investigation of the USDA-ARS and the Wisconsin Agric. Exp. Stn.     

Culture conditions of protoplast-derived cells of nicotiana sylvestris for mutant selection

Large numbers of protoplasts showing reproducible high plating efficiency can be isolated from in vitro propagated, haploid and diploid, plants of Nicotiana sylvestris. Their successful use in the selection of biochemical mutants depends on the establishment of suitable selection parameters: culture medium, cell density, age of cells at selection etc. Plating of protoplasts at low densities as well as simulation and reconstruction experiments of mutant selection were employed to optimize such selection parameters. The results show that some of the principles determined for tobacco protoplast cultures manipulated at low densities or in view of mutant selection are of more general value. However, requirements specific to N. sylvestris protoplast cultures have also been established; they play a decisive part in the successful isolation of resistant mutants in this species.Abbreviations AEC S-aminoethylcysteine - BA benzyl-adenine - NAA napthaleneacetic acid - p-cells or p-colonies protoplast-derived cells or colonies     

Induction of callus formation from difficile date palm protoplasts by means of nurse culture

We report here for the first time callus formation from protoplasts in date palm (Phoenix dactylifera L.). Protoplasts were isolated from young leaves of offshoots and embryogenic calli in Deglet nour and Takerboucht genotypes. The protoplast yield depended on genotype, donor plant material, mixture of enzyme solution, and incubation time. With regard to the donor material, the best response was obtained with callus. Cell division was induced in both liquid culture and nurse culture. The best donor material for cell division was callus and the best response was obtained with the feeder layer, which induced a division rate of 30% in Deglet nour and 15% in Takerboucht genotypes. The dividing cells developed to microcalli on the feeder layer; the microcalli developed to calli on modified MS medium; however, the calli failed to regenerate into roots or shoots.     

Plant Eegeneration from Protoplasts of Brassica carinata Braun

Protoplasts of Brassica carinata Braun. (accession No. 84A165) were enzymatically isolated from hypocotyls and cotyledons of 3–5 day-old test-tube seedlings or first true leaves taken from greenhouse grown plants at a three-leaf stage. The protoplasts were suspended in a P-B liquid medium solidified with 0.15%–0.3% low melting agarose which formed a thin layer floating on the surface of the liquid medium. The optimum protoplast density was ranging from 5× l03 to 1 × 104/ml. As for the hypocotyl protoplasts, the first division was observed after 48 h in the culture. The division frequency reached 21% and 34% at day 3 and 6 respectively. The initiation of cell division in the case of cotyledon and mesophyll protoplast culture was late, usually at day 5, and the division frequency was also somewhat lower. One week after culture, the cultures were transferred to fluorescent light condition with an intensity of about 1000 lx. A dilution medium DPDK3 was then added and the dilution procedure was repeated at one week interval thereafter. One month after culture, microcalli with 300–500 μm in size were formed. It was also found that in some cases globular embryoid structure protruded on the callus surface. Totally, a 2%–3% plating efficiency was achieved. Shoot regeneration occurred when cotyledon and mesophyll protoplast-derived calli were transferred onto a modified MS medium supplemented with NAA 0.1, BA 3 mg/l. Individual shoots were rooted on a rooting medium supplemented with 0.2 mg/l of IAA. Intact plants with normal morphology were eventually produced.     

Culture of soybean mesophyll protoplasts in alginate beads

Mesophyll protoplasts were isolated from leaves of 10 day old aseptically grown soybean seedlings, or from surface disinfested leaves of 3 week old plants grown in environmental chambers. The protoplasts were encapsulated in 2mm diameter Ca alginate beads. Immobilized protoplasts were induced to divide by culturing in shaker flasks containing an actively growing soybean cell suspension. The feeder cell suspension supported the division of protoplasts independent of the protoplast density in the Ca alginate beads. At day 18 after encapsulation, the alginate matrix was dissolved, releasing viable callus colonies. The feeder cell suspension obviated plating of protoplasts at high density which is usually required for subsequent cell division and colony development. Since the protoplasts were embedded at low density, the cell colonies were derived from single cells.     

Culture and fusion of pollen protoplasts of Brassica oleracea L. var. italica with haploid mesophyll protoplasts of B. rapa L. ssp. pekinensis

Hybrid callus was formed from the successful protoplast fusion between pollen protoplasts of Brassica oleracea var. italica and haploid mesophyll protoplasts of Brassica rapa. The pollen protoplast isolation frequency in broccoli was highly related to the ratio of trinucleate pollens in the male gametophyte population. Large quantities of pollen protoplasts with high vigor could be isolated, and the isolation frequency reached up to 90% in 6.0-7.0 mm long flower buds with about 94.7% trinucleate-stage pollens. Pollen protoplasts could be collected and purified by discontinuous gradient centrifugation. In 1% Na-alginate embedding culture, cell divisions were observed but no further development was found. The haploid mesophyll protoplasts were isolated from in vitro haploid plants of B. rapa. Results strongly showed the variability in culturability of mesophyll protoplasts from different haploid lines. Both pollen protoplasts and haploid mesophyll protoplasts retained a stable round shape in the designed prefusion solution with an osmotic pressure of 0.74 osmol/kg. Polyethylene glycol was used for the protoplast fusion, and 40% polyethylene glycol 4000 enabled the highest fusion frequency of about 20%. Some postfusion protoplasts showed cell divisions up to callus proliferation. Calli were screened by random amplified polymorphic DNA analysis for their hybrid character. Results revealed the existence of the hybrid calli. Some of the hybrid calli grew well with green color and shoot primordia. According to our knowledge, this is the first report about a hybrid formation between two haploid protoplasts. Potential comprehensive applications, as well as problems of this technique, are discussed.     

Effect of nurse cultures on the production of macro-calli and fertile plants from maize embryogenic suspension culture protoplasts

Fertile plants have been obtained from maize (Zea mays L.) embryogenic suspension culture protoplasts. Friable, embryogenic callus initiated from an immature embryo from a cross involving the genotypes A188, B73, and Black Mexican sweetcorn was used to establish a rapidly growing embryogenic suspension culture. After nine months in culture, high yields of viable protoplasts (30×10⁶/ gram fresh weight) were obtained following a 1.5 hour enzymatic digestion. Protoplasts cultured with feeder cells divided and formed embryogenic callus, from which male and female fertile plants were regenerated. Protoplast-derived R₁ plants were self-pollinated and immature R₂ embryos isolated for callus initiation. Female fertile plants have also been produced from protoplasts isolated from an R₂-derived suspension culture. Significant interactions between protoplast and feeder-cell lines were observed.Abbreviations BC backcross - BMS Black Mexican Sweetcorn - 2,4-D 2,4-dichlorophenoxyacetic acid - PWS protoplast wash solution (0.2 M mannitol, 80 mM CaCl₂) - FDA fluorescein diacetate - ABA abscisic acid     

Suspension and protoplast culture of U.S. rice cultivars

Efficient protoplast culture and plant regeneration of five U.S. rice cultivars (Oryza sativa L.) - Mercury, Lacassine, Maybelle, Cypress, and Lemont - were obtained from suspension cells maintained in modified General Medium. Embryogenic suspension cells were developed from calli grown on the original callus induction medium for 10–20 weeks without subculture. Weekly subculture of the suspensions for five to eight weeks yielded cells suitable for protoplast isolation. After 2 weeks, rate of colony formation from protoplasts varied among the cultivars and ranged from 2.5 to 6.8%. Improvement of plating efficiencies to as high as 13.7% was obtained by conducting a second cycle of protoplast culture. A total of 525 plants were regenerated from the cultivars studied.Abbreviations BAP 6-benzylaminopurine - CH casein acid hydrolysate - MGM modified General Medium - Kin kinetin - NAA naphthaleneacetic acid - 2,4-D 2,4-dichlorophenoxyacetic acid     

Fertile indica and japonica rice plants regenerated from protoplasts isolated from embryogenic haploid suspension cultures

Summary A system to regenerate fertile rice (Oryza sativa L.) plants (both indica and japonica varieties) from protoplasts isolated from anther-derived embryogenic haploid suspension cultures has been established. Green plants were regenerated from protoplast-derived cell clusters five months after suspension culture initiation. Protoplast yields and subsequent growth of the protoplast-derived microcalli were enhanced by transferring suspension cells into AA medium (Muller et al. 1978) three to four days prior to protoplast isolation. Protoplasts were cultured initially in Kao medium (Kao et al. 1977) and in association with nurse cells for four weeks. Protoplast-derived microcalli were transferred onto N6 (Chu et al. 1975) or MS (Murashige and Skoog 1962) media for callus proliferation. Callus growth was more rapid and the calli were more enbryogenic when grown on N6 medium. The 2,4-D concentration used to develop the suspension culture was important. Cell cultures grown in medium containing 0.5 mg/l 2,4-D released protoplasts whose plating efficiency was higher than for protoplasts obtained from suspension cultures grown in 2.0 mg/l 2,4-D. However, suspension cells grown in 2.0 mg/l 2,4-D were superior with regard to the ability of protoplast-derived calli to regenerate green plants. Amongst several hormone treatments evaluated, a combination of 0.5 mg/l NAA + 5.0 mg/l BAP resulted in the largest number of green plants regenerated. There were no significant differences between BAP or kinetin regarding total number of plants regenerated. More than 200 green plants have been produced form six independently initiated suspension cell lines. The number of regenerated plants per 10⁶ protoplats plated anged from 0.4 to 20.0, and the average seed fertility of single panicles of these R_O plants was about 40%.     

Efficient plant regeneration from cell suspension protoplasts of the woody medicinal plant Solanum dulcamara L. (bittersweet,woody nightshade)

Large populations of viable protoplasts were released from suspension cultured cells of the woody medicinal plant Solanum dulcamara (bittersweet, woody nightshade) when the cells were harvested 3 to 7 months after culture initiation and 4 to 5 days after transfer to fresh medium. A Bio-Gel p6 purified enzyme mixture enhanced the protoplast plating efficiency 6 fold compared to the unpurified mixture, without affecting protoplast yield. Agarose-solidified medium markedly improved protoplast division and colony formation, and enabled protoplasts to be plated at lower densities than in liquid medium. All protoplast-derived tissues produced shoots on MS based medium with 1.0 mgl^-1 zeatin. Shoots rooted readily on medium lacking phytohormones. Cytological examination revealed high chromosome stability of suspension cultured cells, of plants derived from such cells, and of protoplast-derived plants. The implication of these results is discussed in relation to the genetic manipulation of this pharmaceutically important plant.     

Haploid Plant Regeneration from Protoplast Cultures of Durum Wheat (Triticum durum Desf.)

Haploid suspension callus cultures from embryos of durum wheat (Triticum durum Desf. ) × maize (Zea mays L. ) crosses were used for protoplast isolation. Experimental results from enzyme digestion showed large numbers of viable protoplasts released from both suspension culture and solid culture of callus cut into small pieces of 1 mm in size prior to incubation in an enzyme solution containing 2.0% cellulase RS and 0.5 % pectolyase Y-23. Division frequency of protoplasts isolated from suspension cultured callus was quite different from that of solid cultured callus, however, the former being 5.20%, and the latter less than 1.0% when cultured on KM8p medium containing 1.0 mg/L 2, 4-D using LMP (low melting point) agarose embedding method. Embryogenic ealli could be selected out from protoplast-derived microcalli after 2 to 3 subcultures. Plants could be regenerated from protoplast-derived embryogenic calli after 20 days of culture on differentiation medium I (MS basal medium supplemented with 0.2 mg/L 2, 4-D, 1.0 mg/L BAP, 0. I mg/L NAA, 3 %/4 su- crose, 200 mg/L casein hydrolysate, 146 mg/L glutamine, 300 mg/L aspartic acid) and (components were the same as I without 2, 4-D) respectively. The plant regeneration frequency was about 20%. Chromosome count of root tip cells of 4 plants of the 22 protoplast- derived plants sampled at random revealed haploid in nature (2n= 2x= 14).