以胶原膜为支架的心肌细胞体外三维培养

将从新生乳鼠心室肌组织获取的心肌细胞接种于鼠尾胶原膜三维支架和组织培养板,以细胞形态、细胞搏动、葡萄糖比消耗率(q_glu)、乳酸比产率(q_lac)、乳酸转化率(Y_lac/glu)、肌酸激酶及乳酸脱氢酶的活力为观察指标,比较心肌细胞在鼠尾胶原膜中三维(3D)培养和组织培养板中二维(2D)培养的差异。培养于鼠尾胶原膜的乳鼠心肌细胞在第5天形成闰盘连接,形成面积约为80mm³、肉眼可见自律性同步收缩的心肌细胞3D培养物。3D培养体系中乳鼠心肌细胞的q_glu、q_lac和Y_lac/glu的均值分别为7.37 μmol/10.6cells/d、2.92 μmol/106cells/d和0.38 μmol/μmol;2D培养体系中乳鼠心肌细胞的q_glu、q_lac和Y_lac/glu的均值分别为7.59 μmol/10.6cells/d、3.83 μmol/10.6cells/d和 0.51 μmol/μmol。两种培养体系中乳鼠心肌细胞的肌酸激酶及乳酸脱氢酶的活力无明显差别。实验结果表明：培养于鼠尾胶原膜的心肌细胞保持正常心肌细胞的代谢活力和收缩功能。     

Rigidity matching between cells and the extracellular matrix leads to the stabilization of cardiac conduction

Biomechanical dynamic interactions between cells and the extracellular environment dynamically regulate physiological tissue behavior in living organisms, such as that seen in tissue maintenance and remodeling. In this study, the substrate-induced modulation of synchronized beating in cultured cardiomyocyte tissue was systematically characterized on elasticity-tunable substrates to elucidate the effect of biomechanical coupling. We found that myocardial conduction is significantly promoted when the rigidity of the cell culture environment matches that of the cardiac cells (4 kiloPascals). The stability of spontaneous target wave activity and calcium transient alternans in high frequency-paced tissue were both enhanced when the cell substrate and cell tissue showed the same rigidity. By adapting a simple theoretical model, we reproduced the experimental trend on the rigidity matching for the synchronized excitation. We conclude that rigidity matching in cell-to-substrate interactions critically improves cardiomyocyte-tissue synchronization, suggesting that mechanical coupling plays an essential role in the dynamic activity of the beating heart.     

Investigating the effect of cell substrate on cancer cell stiffness by optical tweezers

The mechanical properties of cells are influenced by their microenvironment. Here we report cell stiffness alteration by changing the cell substrate stiffness for isolated cells and cells in contact with other cells. Polydimethylsiloxane (PDMS) is used to prepare soft substrates with three different stiffness values (173, 88 and 17 kPa respectively). Breast cancer cells lines, namely HBL-100, MCF-7 and MDA-MB-231 with different level of aggressiveness are cultured on these substrates and their local elasticity is investigated by vertical indentation of the cell membrane. Our preliminary results show an unforeseen behavior of the MDA-MB-231 cells. When cultured on glass substrate as isolated cells, they are less stiff than the other two types of cells, in agreement with the general statement that more aggressive and metastatic cells are softer. However, when connected to other cells the stiffness of MDA-MB-231 cells becomes similar to the other two cell lines. Moreover, the stiffness of MDA-MB-231 cells cultured on soft PDMS substrates is significantly higher than the stiffness of the other cell types, demonstrating thus the strong influence of the environmental conditions on the mechanical properties of the cells.     

Probing cell structure by controlling the mechanical environment with cell–substrate interactions

Recent results demonstrate the exquisite sensitivity of cell morphology and structure to mechanical stimulation. Mechanical stimulation is often coupled with cell–substrate interactions that can, in turn, influence molecular response and determine cellular fates including apoptosis, proliferation, and differentiation. To understand these effects as they specifically relate to compressive mechanical stimulation and topographic control, we developed a microfabricated system to grow cells on polydimethylsiloxane (PDMS) microchannel surfaces where we maintained compression stimulation. We also probed cellular response following compressive mechanical stimulation to PDMS substrates of varying stiffness. In these instances, we examined cytoskeletal and morphologic changes in living cells attached to our substrate following the application of localized compressive stimulation. We found that the overall morphology and cell structure, including the actin cytoskeleton, oriented in the direction of the compressive strain applied and along the topographic microchannels. Furthermore by comparing topographic response to material stiffness, we found a 40% increase in cell area for cells cultured on the microchannels versus softer PDMS as well as a decreased cell area of 30% when using softer PDMS over unmodified PDMS. These findings have implications for research in a diversity of fields including cell–material interactions, mechanotransduction, and tissue engineering.     

Rapid and enhanced repolarization in sandwich-cultured hepatocytes on an oxygen-permeable membrane

In this study, we established rat primary hepatocyte sandwich cultures on oxygen-permeable membranes and investigated the change in their repolarization. Functional bile canaliculi in sandwich-cultured hepatocytes on oxygen-permeable polydimethylsiloxane (PDMS) membranes were re-established more quickly than those in a conventional sandwich culture on polystyrene (PS). This enhanced biliary excretory activity was also observed in hepatocytes on another oxygen-permeable membrane plate but not on a PDMS surface whose oxygen permeability is blocked. An apical efflux transporter protein, Mrp2, was more rapidly distributed in hepatocytes cultured on PDMS membranes than in hepatocytes cultured on conventional PS plates. Moreover, the area of distribution of the Mrp2 in polarized hepatocytes cultured on PDMS membranes was more widespread than that for the hepatocytes grown on sandwich-cultured PS plates. The observation of ultrastructure in transmission electron microscopy clearly confirmed the presence of bile canalicular lumens possessing microvilli and tight junctions. Additionally, we demonstrated that the 7-ethoxyresorufin-O-deethylation activity of hepatocytes on PDMS membranes was also improved as compared to those on a PS surface. Therefore, sandwich-cultured hepatocytes on oxygen-permeable substrates can provide a simple tool for predicting the hepatic metabolism and toxicity of xenobiotics in vivo with short span and low cost in the course of drug discovery and evaluation.     

Probing Relevant Molecules in Modulating the Neurite Outgrowth of Hippocampal Neurons on Substrates of Different Stiffness

Hippocampal neurons play a critical role in learning and memory; however, the effects of environmental mechanical forces on neurite extension and associated underlying mechanisms are largely unexplored, possibly due to difficulties in maintaining central nervous system neurons. Neuron adhesion, neurite length, and mechanotransduction are mainly influenced by the extracellular matrix (ECM), which is often associated with structural scaffolding. In this study, we investigated the relationship between substrate stiffness and hippocampal neurite outgrowth by controlling the ratios of polydimethylsiloxane (PDMS) base to curing agent to create substrates of varying stiffness. Immunostaining results demonstrated that hippocampal neurons have longer neurite elongation in 35∶1 PDMS substrate compared those grown on 15∶1 PDMS, indicating that soft substrates provide a more optimal stiffness for hippocampal neurons. Additionally, we discovered that pPKCα expression was higher in the 15∶1 and 35∶1 PDMS groups than in the poly-l-lysine-coated glass group. However, when we used a fibronectin (FN) coating, we found that pFAKy397 and pFAKy925 expression were higher in glass group than in the 15∶1 or 35∶1 PDMS groups, but pPKCα and pERK1/2 expression were higher in the 35∶1 PDMS group than in the glass group. These results support the hypothesis that environmental stiffness influences hippocampal neurite outgrowth and underlying signaling pathways.     

Acceleration of neuronal precursors differentiation induced by substrate nanotopography

Embryonic stem (ES) cell differentiation in specific cell lineages is a major issue in cell biology particularly in regenerative medicine. Differentiation is usually achieved by using biochemical factors and it is not clear whether mechanical properties of the substrate over which cells are grown can affect proliferation and differentiation. Therefore, we produced patterns in polydimethylsiloxane (PDMS) consisting of groove and pillar arrays of sub-micrometric lateral resolution as substrates for cell cultures. We analyzed the effect of different nanostructures on differentiation of ES-derived neuronal precursors into neuronal lineage without adding biochemical factors. Neuronal precursors adhered on PDMS more effectively than on glass coverslips. We demonstrated that neuronal yield was enhanced by increasing pillars height from 35 to 400 nm. On higher pillar neuronal differentiation reaches ～80% 96 h after plating and the largest differentiation enhancement of pillars over flat PDMS was observed during the first 6 h of culture. We conclude that PDMS nanopillars accelerate and increase neuronal differentiation.     

基于玻璃基底的细胞培养芯片研究

目的：为了对细胞进行长期观察和培养,研究细胞培养芯片的制作以及其与温度控制装置、进样系统、信号检测系统等的整合。方法：以商品化的氧化铟锡（ITO）透明导电玻璃为芯片加工的基质材料,利用光刻胶AZ4620作为玻璃湿法刻蚀的掩模层,并应用玻璃湿法刻蚀过程中的钻蚀效应,快速、低成本地加工细胞培养芯片;将此芯片与聚二甲基硅氧烷（PDMS）薄膜经氧等离子体作用后共价结合,整合温度控制系统、进样系统、信号检测系统等。结果：获得了可用于细胞培养的微系统,实现了对猪髂骨动脉内皮细胞（PIEC）在芯片内至少3d的观察和培养。结论：制备的芯片能够用于细胞的长期观察和培养,为研究细胞迁移特性等提供了有效工具。     

A method to fabricate mesoscopic freestanding polydimethylsiloxane membranes used to probe the rheology of an epithelial sheet

Details are presented for the formulation, fabrication, and mechanical characterization of mesoscopic freestanding polydimethylsiloxane (PDMS) elastomer membranes, 10.0 μm thick and 5.0 mm in diameter, used to probe the rheology of a living epithelial sheet. In what is described as a composite diaphragm inflation (CDI) experiment, freestanding PDMS membranes are utilized as substrates for the culture of a sheet of epithelial cells. Together, the cell layer and the PDMS elastomer form a composite diaphragm (CD) that is suitable for mechanical testing in an axisymmetric membrane inflation experiment. In order to distinguish the rheological behavior of the epithelial sheet from the mechanical response of the elastomer using inflation test data, freestanding PDMS membranes should exhibit a highly compliant yet mechanically invariant finite load-deformation response when subjected to multiple inflation cycles following intermittent periods of cell culture. Given these considerations, we describe a method for preparing freestanding PDMS elastomer membrane specimens that are optically transparent, tensed, and wrinkle-free. Surface modifications intended to facilitate cell culture, namely water vapor plasma and ultraviolet light treatments, were shown to dramatically stiffen the mechanical response of the membranes, rendering them unusable as CD substrates. In this study, only PDMS membranes with physiosorbed collagen demonstrated the mechanical compliance, fatigue resistance, and environmental stability necessary for reliable use in CDI experiments.     

Alignment of skeletal muscle myoblasts and myotubes using linear micropatterned surfaces ground with abrasives

Alignment of cells plays a significant key role in skeletal muscle tissue engineering because skeletal muscle tissue in vivo has a highly organized structure consisting of long parallel multinucleated myotubes formed through differentiation and fusion of myoblasts. In the present study, we developed an easy, simple, and low‐cost method for aligning skeletal muscle cells by using surfaces with linear microscale features fabricated by grinding. Iron blocks were ground in one direction with three kinds of abrasives (9 µm diamond suspension, #400 sandpaper, and #150 sandpaper) and then used as molds to make micropatterned polydimethylsiloxane (PDMS) substrates (type I, type II, and type III). Observation of the surface topography revealed that the PDMS substrates exhibited different degree of mean roughness (Ra), 0.03 µm for type I, 0.16 µm for type II, and 0.56 µm for type III, respectively. Murine skeletal muscle cell line C2C12 myoblasts were cultured and differentiated on the patterned PDMS substrates, and it was examined whether the alignment of C2C12 myoblasts and myotubes was possible. Although the cell growth and differentiation on the three types of patterned substrates were similar to those on the flat PDMS substrate as a control, the alignment of both C2C12 myoblasts and myotubes was obviously observed on types II and III, but not on type I or the control substrate. These results indicate that surfaces ground with abrasives will be useful for fabricating aligned skeletal muscle tissues. Biotechnol. Bioeng. 2009;103: 631–638. © 2009 Wiley Periodicals, Inc.     

Organ Explant Culture of Neonatal Rat Ventricles: A New Model to Study Gene and Cell Therapy

Testing cardiac gene and cell therapies in vitro requires a tissue substrate that survives for several days in culture while maintaining its physiological properties. The purpose of this study was to test whether culture of intact cardiac tissue of neonatal rat ventricles (organ explant culture) may be used as a model to study gene and cell therapy. We compared (immuno) histology and electrophysiology of organ explant cultures to both freshly isolated neonatal rat ventricular tissue and monolayers. (Immuno) histologic studies showed that organ explant cultures retained their fiber orientation, and that expression patterns of α-actinin, connexin-43, and α-smooth muscle actin did not change during culture. Intracellular voltage recordings showed that spontaneous beating was rare in organ explant cultures (20%) and freshly isolated tissue (17%), but common (82%) in monolayers. Accordingly, resting membrane potential was -83.9±4.4 mV in organ explant cultures, −80.5±3.5 mV in freshly isolated tissue, and −60.9±4.3 mV in monolayers. Conduction velocity, measured by optical mapping, was 18.2±1.0 cm/s in organ explant cultures, 18.0±1.2 cm/s in freshly isolated tissue, and 24.3±0.7 cm/s in monolayers. We found no differences in action potential duration (APD) between organ explant cultures and freshly isolated tissue, while APD of monolayers was prolonged (APD at 70% repolarization 88.8±7.8, 79.1±2.9, and 134.0±4.5 ms, respectively). Organ explant cultures and freshly isolated tissue could be paced up to frequencies within the normal range for neonatal rat (CL 150 ms), while monolayers could not. Successful lentiviral (LV) transduction was shown via Egfp gene transfer. Co-culture of organ explant cultures with spontaneously beating cardiomyocytes increased the occurrence of spontaneous beating activity of organ explant cultures to 86%. We conclude that organ explant cultures of neonatal rat ventricle are structurally and electrophysiologically similar to freshly isolated tissue and a suitable new model to study the effects of gene and cell therapy.     

Simultaneous orientation and cellular force measurements in adult cardiac myocytes using three-dimensional polymeric microstructures

A number of techniques have been developed to monitor contractile function in isolated cardiac myocytes. While invaluable observations have been gained from these methodologies in understanding the contractile processes of the heart, they are invariably limited by their in vitro conditions. The present challenge is to develop innovative assays to mimic the in vivo milieu so as to allow a more physiological assessment of cardiac myocyte contractile forces. Here we demonstrate the use of a silicone elastomer, poly(dimethylsiloxane) (PDMS), to simultaneously orient adult cardiac myocytes in primary culture and measure the cellular forces in a three-dimensional substrate. The realignment of adult cardiac myocytes in long-term culture (7 days) was achieved due to directional reassembly of the myofibrils along the parallel polymeric sidewalls. The cellular mechanical forces were recorded in situ by observing the deformation of the micropillars embedded in the substrate. By coupling the cellular mechanical force measurements with on-chip cell orientation, this novel assay is expected to provide a means of a more physiological assessment of single cardiac myocyte contractile function and may facilitate the future development of in vitro assembled functional cardiac tissue.     

Is cell culture stressful? Effects of degradable and nondegradable culture surfaces on U937 cell function

In vitro cell culture has become one of the most widely used techniques in biological and health sciences research, with the most common culture supports being either tissue culture grade polystyrene (TCPS) or polydimethylsiloxane (PDMS). It has previously been shown that monocyte-derived macrophages (MDMs) respond to material surface chemistry, synthesizing and releasing degradative activities that could produce products, which alter the cell's response. In this study, functional parameters of differentiated U937 macrophage-like cells were compared when cultured on nondegradable standard control surfaces versus models of biomaterials (polycarbonate-based polyurethanes) used in the manufacture of medical devices previously shown to degrade and/or elicit pathways of inflammation. Although the influence of PDMS and TCPS on cell function is often underappreciated by investigators, both surfaces elicited enzyme markers of inflammation. Cells on TCPS had the highest intracellular and released esterase activities and protein levels. Cells on PDMS had the most released acid phosphatase activity and protein (P < 0.001), as well as de novo 57- and 59-kDa released proteins. The criteria for defining an activated cell phenotype become critically important when materials such as PDMS and TCPS are used as standard control surfaces whether in experiments for research in elucidating metabolic pathways or in screening drugs and materials for therapeutic uses.     

Large area micropatterning of cells on polydimethylsiloxane surfaces

Background

Precise spatial control and patterning of cells is an important area of research with numerous applications in tissue engineering, as well as advancing an understanding of fundamental cellular processes. Poly (dimethyl siloxane) (PDMS) has long been used as a flexible, biocompatible substrate for cell culture with tunable mechanical characteristics. However, fabrication of suitable physico-chemical barriers for cells on PDMS substrates over large areas is still a challenge.

Results

Here, we present an improved technique which integrates photolithography and cell culture on PDMS substrates wherein the barriers to cell adhesion are formed using the photo-activated graft polymerization of polyethylene glycol diacrylate (PEG-DA). PDMS substrates with varying stiffness were prepared by varying the base to crosslinker ratio from 5:1 to 20:1. All substrates show controlled cell attachment confined to fibronectin coated PDMS microchannels with a resistance to non-specific adhesion provided by the covalently immobilized, hydrophilic PEG-DA.

Conclusions

Using photolithography, it is possible to form patterns of high resolution stable at 37°C over 2 weeks, and microstructural complexity over large areas of a few cm². As a robust and scalable patterning method, this technique showing homogenous and stable cell adhesion and growth over macroscales can bring microfabrication a step closer to mass production for biomedical applications.

     

Morphology, cytoskeletal organization, and myosin dynamics of mouse embryonic fibroblasts cultured on nanofibrillar surfaces

Growth of cells in tissue culture is generally performed on two-dimensional (2D) surfaces composed of polystyrene or glass. Recent work, however, has shown that such 2D cultures are incomplete and do not adequately represent the physical characteristics of native extracellular matrix (ECM)/basement membrane (BM), namely dimensionality, compliance, fibrillarity, and porosity. In the current study, a three-dimensional (3D) nanofibrillar surface composed of electrospun polyamide nanofibers was utilized to mimic the topology and physical structure of ECM/BM. Additional chemical cues were incorporated into the nanofibrillar matrix by coating the surfaces with fibronectin, collagen I, or laminin-1. Results from the current study show an enhanced response of primary mouse embryonic fibroblasts (MEFs) to culture on nanofibrillar surfaces with more dramatic changes in cell spreading and reorganization of the cytoskeleton than previously observed for established cell lines. In addition, the cells cultured on nanofibrillar and 2D surfaces exhibited differential responses to the specific ECM/BM coatings. The localization and activity of myosin II-B for MEFs cultured on nanofibers was also compared. A dynamic redistribution of myosin II-B was observed within membrane protrusions. This was previously described for cells associated with nanofibers composed of collagen I but not for cells attached to 2D surfaces coated with monomeric collagen. These results provide further evidence that nanofibrillar surfaces offer a significantly different environment for cells than 2D substrates.     

Physical,contractile and calcium handling properties of neonatal cardiac myocytes cultured on different matrices

Extracellular matrix components play a vital role in the determination of heart cell growth, development of spontaneous contractile activity and morphologic differentiation. In this work we studied the physical and contractile changes in neonatal rat cardiac myocytes over the first four days of growth on three different extracellular matrices. We compared commercial laminin and fibronectin, plus a fibroblast-derived extracellular matrix, which we have termed cardiogel. Myocytes cultured on cardiogel were characterized by greater cellular area and volume when compared to cells cultured on the other single-component matrices. Spontaneous contractile activity appeared first in the cells grown on cardiogel, sometimes as early as the first day post-plating, in contrast to day three in the cells cultured on laminin. Measurements of cardiac myocyte contractility i.e. percent shortening and time to peak contraction, were made on each of the first four days in each culture. Myocytes cultured on cardiogel developed maximum shortening more rapidly than the other cultures, and an earlier response to electrical pacing. Histochemical staining for myocyte mitochondrial content, revealed that the cardiogelsupported cells exhibited the earliest development of this organelle and, after four days, the greatest abundance. This reflects both a greater cell size, as well as response to increasing energy demands.

Due to the increase in volume and contractile activity exhibited by the cardiogel grown myocytes, we employed calcium binding and uptake experiments to determine the comparative cellular capacities for calcium and as an indicator of sarcoplasmic reticulum development. Also whole cell phosphorylation in the presence of low detergent was assayed, to correlate calcium uptake with phosphorylation, in an attempt to examine possible increases in calcium pump number and other phosphorylatable proteins. In agreement with our physical and contractile data, we found that the cells grown on cardiogel showed a greater calcium uptake over the first four days of culture, and increased phosphorylation. However, calcium binding was not dramatically different comparing the three culture matrices.

Based on our data, the fibroblast-derived cardiogel is the matrix of choice supporting earliest maturation of neonatal cardiomyocytes, in terms of spontaneous contractions, calcium handling efficiency, cell size and development of a subcellar organelle, the mitochondrion.     

Effect of Matrix on Cardiomyocyte Viscoelastic Properties in 2D Culture

Cardiomyocyte phenotype changes significantly in 2D culture systems depending on the substrate composition and organization. Given the variety of substrates that are used both for basic cardiac cell culture studies and for regenerative medicine applications, there is a critical need to understand how the different matrices influence cardiac cell mechanics. In the current study, the mechanical properties of neonatal rat cardiomyocytes cultured in a subconfluent layer upon aligned and unaligned collagen and fibronectin matrices were assessed over a two week period using atomic force microscopy. The elastic modulus was estimated by fitting the Hertz model to force curve data and the percent relaxation was determined from stress relaxation curves. The Quasilinear Viscoelastic (QLV) and Standard Linear Solid (SLS) models were fit to the stress relaxation data. Cardiomyocyte cellular mechanical properties were found to be highly dependent on matrix composition and organization as well as time in culture. It was observed that the cells stiffened and relaxed less over the first 3 to 5 days in culture before reaching a plateau in their mechanical properties. After day 5, cells on aligned matrices were stiffer than cells on unaligned matrices and cells on fibronectin matrices were stiffer than cells on collagen matrices. No such significant trends in percent relaxation measurements were observed but the QLV model fit the data very well. These results were correlated with observed changes in cellular structure associated with culture on the different substrates and analyzed for cell-to-cell variability.     

Perfusion culture of fetal human hepatocytes in microfluidic environments

Various types of bioreactors composed of microstructured PDMS (Polydimethylsiloxane) layers have recently been fabricated for perfusion culture of mammalian cells such as adult rat hepatocytes. As a new feature of those bioreactors, in this study, cultivation of fetal human hepatocytes (FHHs) was attempted, because they have high possibility to mature in vitro with preserving their normality, which is suitable for inplantation of liver tissue equivalents reconstituted in vitro. During the perfusion culture in the PDMS bioreactors for 1 week, cells showed good attachment, spreading and reached their confluence over the channels. In addition, their albumin production was significantly enhanced in the perfusion culture using the PDMS bioreactors up to about four times during the FHH perfusion culture when compared in dish-level static culture. Hep G2 cell cultures were also performed and have also shown under perfusion conditions an enhanced cell activity multiplied by 2 compared to static conditions. Although, the cellular activities of FHH cells are still low even compared to those of the Hep G2 cells, the conclusions of this work is encouraging toward future liver tissue engineering based on in vitro propagation and maturation of hepatocyte progenitors combined with microfabrication technologies.