Molecular characterization and genomic organization of low molecular weight glutenin subunit genes at the Glu-3 loci in hexaploid wheat (Triticum aestivum L.)

In this study, we report on the molecular characterization and genomic organization of the low molecular weight glutenin subunit (LMW-GS) gene family in hexaploid wheat (Triticum aestivum L.). Eighty-two positive BAC clones were identified to contain LMW-GS genes from the hexaploid wheat ‘Glenlea’ BAC library via filter hybridization and PCR validation. Twelve unique LMW glutenin genes and seven pseudogenes were isolated from these positive BAC clones by primer-template mismatch PCR and subsequent primer walking using hemi-nested touchdown PCR. These genes were sequenced and each consisted of a single-open reading frame (ORF) and untranslated 5′ and 3′ flanking regions. All 12 LMW glutenin subunits contained eight cysteine residues. The LMW-m-type subunits are the most abundant in hexaploid wheat. Of the 12 LMW-GS, 1, 2 and 9 are i-type, s-type and m-type, respectively. The phylogenetic analysis suggested that the LMW-i type gene showed greater differences to LMW-s and LMW-m-type genes, which, in turn, were more closely related to one another. On the basis of their N-terminal sequences, they were classified into nine groups. Fingerprinting of the 82 BAC clones indicated 30 BAC clones assembled into eight contigs, while the remaining clones were singletons. BAC end sequencing of the 82 clones revealed that long terminal repeat (LTR) retrotransposons were abundant in the Glu-3 regions. The average physical distance between two adjacent LMW-GS genes was estimated to be 81 kb. Most of LMW-GS genes are located in the d-genome, suggesting that the Glu-D3 locus is much larger than the Glu-B3 locus and Glu-A3 locus. Alignments of sequences indicated that the same type (starting with the same N-terminal sequence) LMW-GS genes were highly conserved in the homologous genomes between hexaploid wheat and its donors such as durum wheat and T. tauschii. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Characterization of low-molecular-weight glutenin genes in <Emphasis Type="Italic">Aegilops tauschii</Emphasis>

This paper reports the characterization of the low-molecular-weight (LMW) glutenin gene family of Aegilops tauschii (syn. Triticum tauschii), the D-genome donor of hexaploid wheat. By analysis of bacterial artificial chromosome (BAC) clones positive for hybridization with an LMW glutenin probe, seven unique LMW glutenin genes were identified. These genes were sequenced, including their untranslated 3 and 5 flanking regions. The deduced amino acid sequences of the genes revealed four putative active genes and three pseudogenes. All these genes had a very high level of similarity to LMW glutenins characterized in hexaploid wheat. The predicted molecular weights of the mature proteins were between 32.2 kDa and 39.6 kDa, and the predicted isoelectric points of the proteins were between 7.53 and 8.06. All the deduced proteins were of the LMW-m type. The organization of the seven LMW glutenin genes appears to be interspersed over at least several hundred kilo base pairs, as indicated by the presence of only one gene or pseudogene per BAC clone. Southern blot analysis of genomic DNA of Ae. tauschii and the BAC clones containing the seven LMW glutenin genes indicated that the BAC clones contained all LMW glutenin-hybridizing bands present in the genome. Two-dimensional gel electrophoresis of an LMW glutenin extract from Ae. tauschii was conducted and showed the presence of at least 11 distinct proteins. Further analysis indicated that some of the observed proteins were modified gliadins. These results suggest that the actual number of typical LMW glutenins may in fact be much lower than previously thought, with a number of modified gliadins also being present in the polymeric fraction.     

Bacterial artificial chromosome library of Finegoldia magna ATCC 29328 for genetic mapping and comparative genomics

We constructed a bacterial artificial chromosome (BAC) library of Finegoldia magna ATCC 29328 DNA to facilitate further genome analysis of F. magna. The BAC library contained 385 clones with an average insert size of 55 kb, representing a 10.1-fold genomic coverage. Repeated DNA hybridization using primer sets designed on the basis of BAC-end sequences yielded nine contigs covering 95% of the chromosome and two contigs covering 98% of the plasmid. The contigs were localized on the physical map of F. magna ATCC 29328 DNA. A total of 121 BAC-end sequences revealed 103 unique genes, which had not been previously reported for F. magna. The homolog ORF of albumin-binding protein (urPAB), one of the known virulence factors from F. magna, was sequenced and localized on the physical map. Homology analysis of 121 BAC-end sequences revealed that F. magna is most closely related to clostridia, particularly Clostridium tetani. This close relationship is consistent with the recent classification of peptostreptococci based on 16S rRNA sequence analysis. The BAC library constructed here will be useful for the whole genome sequencing project and other postgenomic applications.     

SPC-P1: a pathogenicity-associated prophage of Salmonella paratyphi C

Background

The presence of closely related genomes in polyploid species makes the assembly of total genomic sequence from shotgun sequence reads produced by the current sequencing platforms exceedingly difficult, if not impossible. Genomes of polyploid species could be sequenced following the ordered-clone sequencing approach employing contigs of bacterial artificial chromosome (BAC) clones and BAC-based physical maps. Although BAC contigs can currently be constructed for virtually any diploid organism with the SNaPshot high-information-content-fingerprinting (HICF) technology, it is currently unknown if this is also true for polyploid species. It is possible that BAC clones from orthologous regions of homoeologous chromosomes would share numerous restriction fragments and be therefore included into common contigs. Because of this and other concerns, physical mapping utilizing the SNaPshot HICF of BAC libraries of polyploid species has not been pursued and the possibility of doing so has not been assessed. The sole exception has been in common wheat, an allohexaploid in which it is possible to construct single-chromosome or single-chromosome-arm BAC libraries from DNA of flow-sorted chromosomes and bypass the obstacles created by polyploidy.

Results

The potential of the SNaPshot HICF technology for physical mapping of polyploid plants utilizing global BAC libraries was evaluated by assembling contigs of fingerprinted clones in an in silico merged BAC library composed of single-chromosome libraries of two wheat homoeologous chromosome arms, 3AS and 3DS, and complete chromosome 3B. Because the chromosome arm origin of each clone was known, it was possible to estimate the fidelity of contig assembly. On average 97.78% or more clones, depending on the library, were from a single chromosome arm. A large portion of the remaining clones was shown to be library contamination from other chromosomes, a feature that is unavoidable during the construction of single-chromosome BAC libraries.

Conclusions

The negligibly low level of incorporation of clones from homoeologous chromosome arms into a contig during contig assembly suggested that it is feasible to construct contigs and physical maps using global BAC libraries of wheat and almost certainly also of other plant polyploid species with genome sizes comparable to that of wheat. Because of the high purity of the resulting assembled contigs, they can be directly used for genome sequencing. It is currently unknown but possible that equally good BAC contigs can be also constructed for polyploid species containing smaller, more gene-rich genomes.     

FISH physical mapping with barley BAC clones

Fluorescence in situ hybridization (FISH) is a useful technique for physical mapping of genes, markers, and other single- or low-copy sequences. Since clones containing less than 10 kb of single-copy DNA do not reliably produce detectable signals with current FISH techniques in plants, a bacterial artificial chromosome (BAC) partial library of barley was constructed and a FISH protocol for detecting unique sequences in barley BAC clones was developed. The library has a 95 kb average barley insert, representing about 20% of a barley genome. Two BAC clones containing hordein gene sequences were identified and partially characterized. FISH using these two BAC clones as probes showed specific hybridization signals near the end of the short arm of one pair of chromosomes. Restriction digests of these two BAC clones were compared with restriction patterns of genomic DNA; all fragments contained in the BAC clones corresponded to bands present in the genomic DNA, and the two BAC clones were not identical. The barley inserts contained in these two BAC clones were faithful copies of the genomic DNA. FISH with four BAC clones with inserts varying from 20 to 150 kb, showed distinct signals on paired chromatids. Physical mapping of single- or low-copy sequences in BAC clones by FISH will help to correlate the genetic and physical maps. FISH with BAC clones also provide an additional approach for saturating regions of interest with markers and for constructing contigs spanning those regions.     

A BAC-based physical map of Zhikong scallop (Chlamys farreri Jones et Preston)

Zhikong scallop (Chlamys farreri) is one of the most economically important aquaculture species in China. Physical maps are crucial tools for genome sequencing, gene mapping and cloning, genetic improvement and selective breeding. In this study, we have developed a genome-wide, BAC-based physical map for the species. A total of 81,408 clones from two BAC libraries of the scallop were fingerprinted using an ABI 3130xl Genetic Analyzer and a fingerprinting kit developed in our laboratory. After data processing, 63,641 (～5.8× genome coverage) fingerprints were validated and used in the physical map assembly. A total of 3,696 contigs were assembled for the physical map. Each contig contained an average of 10.0 clones, with an average physical size of 490 kb. The combined total physical size of all contigs was 1.81 Gb, equivalent to approximately 1.5 fold of the scallop haploid genome. A total of 10,587 BAC end sequences (BESs) and 167 markers were integrated into the physical map. We evaluated the physical map by overgo hybridization, BAC-FISH (fluorescence in situ hybridization), contig BAC pool screening and source BAC library screening. The results have provided evidence of the high reliability of the contig physical map. This is the first physical map in mollusc; therefore, it provides an important platform for advanced research of genomics and genetics, and mapping of genes and QTL of economical importance, thus facilitating the genetic improvement and selective breeding of the scallop and other marine molluscs.     

Characterization of a new BAC library for rainbow trout: evidence for multi-locus duplication

A 10X rainbow trout bacterial artificial chromosome (BAC) library was constructed to aid in the physical and genetic mapping efforts of the rainbow trout genome. The library was derived from the Swanson clonal line (YY male) and consists of 184,704 clones with an average insert size of 137,500 bp (PFGE) or 118,700 bp (DNA fingerprinting). The clones were gridded onto 10 large nylon membranes to produce high-density arrays for screening the library by hybridization. The library was probed with 11 cDNAs from the NCCCWA EST project chosen because of interest in their homology to known gene sequences, seven known genes, and a Y-specific sex marker. Putative positive clones identified by hybridization were re-arrayed and gridded for secondary confirmation. FPC analysis of HindIII and EcoRV DNA fingerprinting was used to estimate the level of redundancy in the library, to construct BAC contigs and to detect duplicated loci in the semi-duplicated rainbow trout genome. A good correlation (R2 = 0.7) was found between the number of hits per probe and the number of contigs that were assembled from the positive BACs. The average number of BACs per contig was 9.6, which is in good agreement with 10X genome coverage of the library. Two-thirds of the loci screened were predicted to be duplicated as the positive BACs for those genes were assembled into two or three different contigs, which suggests that most of the rainbow trout genome is duplicated.     

A physical map of the highly heterozygous Populus genome: integration with the genome sequence and genetic map and analysis of haplotype variation

As part of a larger project to sequence the Populus genome and generate genomic resources for this emerging model tree, we constructed a physical map of the Populus genome, representing one of the few such maps of an undomesticated, highly heterozygous plant species. The physical map, consisting of 2802 contigs, was constructed from fingerprinted bacterial artificial chromosome (BAC) clones. The map represents approximately 9.4-fold coverage of the Populus genome, which has been estimated from the genome sequence assembly to be 485 ± 10 Mb in size. BAC ends were sequenced to assist long-range assembly of whole-genome shotgun sequence scaffolds and to anchor the physical map to the genome sequence. Simple sequence repeat-based markers were derived from the end sequences and used to initiate integration of the BAC and genetic maps. A total of 2411 physical map contigs, representing 97% of all clones assigned to contigs, were aligned to the sequence assembly (JGI Populus trichocarpa , version 1.0). These alignments represent a total coverage of 384 Mb (79%) of the entire poplar sequence assembly and 295 Mb (96%) of linkage group sequence assemblies. A striking result of the physical map contig alignments to the sequence assembly was the co-localization of multiple contigs across numerous regions of the 19 linkage groups. Targeted sequencing of BAC clones and genetic analysis in a small number of representative regions showed that these co-aligning contigs represent distinct haplotypes in the heterozygous individual sequenced, and revealed the nature of these haplotype sequence differences.     

A Physical Map of the Short Arm of Wheat Chromosome 1A

Bread wheat (Triticum aestivum) has a large and highly repetitive genome which poses major technical challenges for its study. To aid map-based cloning and future genome sequencing projects, we constructed a BAC-based physical map of the short arm of wheat chromosome 1A (1AS). From the assembly of 25,918 high information content (HICF) fingerprints from a 1AS-specific BAC library, 715 physical contigs were produced that cover almost 99% of the estimated size of the chromosome arm. The 3,414 BAC clones constituting the minimum tiling path were end-sequenced. Using a gene microarray containing ∼40 K NCBI UniGene EST clusters, PCR marker screening and BAC end sequences, we arranged 160 physical contigs (97 Mb or 35.3% of the chromosome arm) in a virtual order based on synteny with Brachypodium, rice and sorghum. BAC end sequences and information from microarray hybridisation was used to anchor 3.8 Mbp of Illumina sequences from flow-sorted chromosome 1AS to BAC contigs. Comparison of genetic and synteny-based physical maps indicated that ∼50% of all genetic recombination is confined to 14% of the physical length of the chromosome arm in the distal region. The 1AS physical map provides a framework for future genetic mapping projects as well as the basis for complete sequencing of chromosome arm 1AS.     

Integration of physical and genetic maps in apple confirms whole-genome and segmental duplications in the apple genome

A total of 355 simple sequence repeat (SSR) markers were developed, based on expressed sequence tag (EST) and bacterial artificial chromosome (BAC)-end sequence databases, and successfully used to construct an SSR-based genetic linkage map of the apple. The consensus linkage map spanned 1143 cM, with an average density of 2.5 cM per marker. Newly developed SSR markers along with 279 SSR markers previously published by the HiDRAS project were further used to integrate physical and genetic maps of the apple using a PCR-based BAC library screening approach. A total of 470 contigs were unambiguously anchored onto all 17 linkage groups of the apple genome, and 158 contigs contained two or more molecular markers. The genetically mapped contigs spanned ～421 Mb in cumulative physical length, representing 60.0% of the genome. The sizes of anchored contigs ranged from 97 kb to 4.0 Mb, with an average of 995 kb. The average physical length of anchored contigs on each linkage group was ～24.8 Mb, ranging from 17.0 Mb to 37.73 Mb. Using BAC DNA as templates, PCR screening of the BAC library amplified fragments of highly homologous sequences from homoeologous chromosomes. Upon integrating physical and genetic maps of the apple, the presence of not only homoeologous chromosome pairs, but also of multiple locus markers mapped to adjacent sites on the same chromosome was detected. These findings demonstrated the presence of both genome-wide and segmental duplications in the apple genome and provided further insights into the complex polyploid ancestral origin of the apple.     

A high-resolution physical map integrating an anchored chromosome with the BAC physical maps of wheat chromosome 6B

Background

A complete genome sequence is an essential tool for the genetic improvement of wheat. Because the wheat genome is large, highly repetitive and complex due to its allohexaploid nature, the International Wheat Genome Sequencing Consortium (IWGSC) chose a strategy that involves constructing bacterial artificial chromosome (BAC)-based physical maps of individual chromosomes and performing BAC-by-BAC sequencing. Here, we report the construction of a physical map of chromosome 6B with the goal of revealing the structural features of the third largest chromosome in wheat.

Results

We assembled 689 informative BAC contigs (hereafter reffered to as contigs) representing 91 % of the entire physical length of wheat chromosome 6B. The contigs were integrated into a radiation hybrid (RH) map of chromosome 6B, with one linkage group consisting of 448 loci with 653 markers. The order and direction of 480 contigs, corresponding to 87 % of the total length of 6B, were determined. We also characterized the contigs that contained a part of the nucleolus organizer region or centromere based on their positions on the RH map and the assembled BAC clone sequences. Analysis of the virtual gene order along 6B using the information collected for the integrated map revealed the presence of several chromosomal rearrangements, indicating evolutionary events that occurred on chromosome 6B.

Conclusions

We constructed a reliable physical map of chromosome 6B, enabling us to analyze its genomic structure and evolutionary progression. More importantly, the physical map should provide a high-quality and map-based reference sequence that will serve as a resource for wheat chromosome 6B.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1803-y) contains supplementary material, which is available to authorized users.     

Wheat storage proteins: glutenin DNA diversity in wild emmer wheat,Triticum dicoccoids,in Israel and Turkey. 3. Environmental correlates and allozymic associations

The diversity of high-molecular-weight (HMW) and low-molecular-weight (LMW) glutenin subunits in the tetraploid wild progenitor of wheat, Triticum dicoccoides, was studied at the DNA level by the polymerase chain reaction (PCR). The DNA diversity of HMW and LMW glutenins was shown to be correlated to environmental physical and biotic factors (climate, soil and pathogen resistance) and to allozyme variation. We conclude that glutenin DNA diversity is nonrandomly distributed and could be more optimally sampled in nature for future breeding programmes to improve bread quality.     

Strategy to sequence the genome of Corynebacterium glutamicum ATCC 13032: use of a cosmid and a bacterial artificial chromosome library

The initial strategy of the Corynebacterium glutamicum genome project was to sequence overlapping inserts of an ordered cosmid library. High-density colony grids of approximately 28 genome equivalents were used for the identification of overlapping clones by Southern hybridization. Altogether 18 contiguous genomic segments comprising 95 overlapping cosmids were assembled. Systematic shotgun sequencing of the assembled cosmid set revealed that only 2.84 Mb (86.6%) of the C. glutamicum genome were represented by the cosmid library. To obtain a complete genome coverage, a bacterial artificial chromosome (BAC) library of the C. glutamicum chromosome was constructed in pBeloBAC11 and used for genome mapping. The BAC library consists of 3168 BACs and represents a theoretical 63-fold coverage of the C. glutamicum genome (3.28 Mb). Southern screening of 2304 BAC clones with PCR-amplified chromosomal markers and subsequent insert terminal sequencing allowed the identification of 119 BACs covering the entire chromosome of C. glutamicum. The minimal set representing a 100% genome coverage contains 44 unique BAC clones with an average overlap of 22 kb. A total of 21 BACs represented linking clones between previously sequenced cosmid contigs and provided a valuable tool for completing the genome sequence of C. glutamicum.     

Cross-species bacterial artificial chromosome (BAC) library screening via overgo-based hybridization and BAC-contig mapping of a yield enhancement quantitative trait locus (QTL) yld1.1 in the Malaysian wild rice Oryza rufipogon

The construction of BAC-contig physical maps is an important step towards a partial or ultimate genome sequence analysis. Here, we describe our initial efforts to apply an overgo approach to screen a BAC library of the Malaysian wild rice species, Oryza rufipogon. Overgo design is based on repetitive element masking and sequence uniqueness, and uses short probes (approximately 40 bp), making this method highly efficient and specific. Pairs of 24-bp oligos that contain an 8-bp overlap were developed from the publicly available genomic sequences of the cultivated rice, O. sativa, to generate 20 overgo probes for a 1-Mb region that encompasses a yield enhancement QTL yld1.1 in O. rufipogon. The advantages of a high similarity in melting temperature, hybridization kinetics and specific activities of overgos further enabled a pooling strategy for library screening by filter hybridization. Two pools of ten overgos each were hybridized to high-density filters representing the O. rufipogon genomic BAC library. These screening tests succeeded in providing 69 PCR-verified positive hits from a total of 23,040 BAC clones of the entire O. rufipogon library. A minimal tilling path of clones was generated to contribute to a fully covered BAC-contig map of the targeted 1-Mb region. The developed protocol for overgo design based on O. sativa sequences as a comparative genomic framework, and the pooled overgo hybridization screening technique are suitable means for high-resolution physical mapping and the identification of BAC candidates for sequencing.     

Rapid genome divergence at orthologous low molecular weight glutenin loci of the A and Am genomes of wheat

To study genome evolution in wheat, we have sequenced and compared two large physical contigs of 285 and 142 kb covering orthologous low molecular weight (LMW) glutenin loci on chromosome 1AS of a diploid wheat species (Triticum monococcum subsp monococcum) and a tetraploid wheat species (Triticum turgidum subsp durum). Sequence conservation between the two species was restricted to small regions containing the orthologous LMW glutenin genes, whereas >90% of the compared sequences were not conserved. Dramatic sequence rearrangements occurred in the regions rich in repetitive elements. Dating of long terminal repeat retrotransposon insertions revealed different insertion events occurring during the last 5.5 million years in both species. These insertions are partially responsible for the lack of homology between the intergenic regions. In addition, the gene space was conserved only partially, because different predicted genes were identified on both contigs. Duplications and deletions of large fragments that might be attributable to illegitimate recombination also have contributed to the differentiation of this region in both species. The striking differences in the intergenic landscape between the A and A(m) genomes that diverged 1 to 3 million years ago provide evidence for a dynamic and rapid genome evolution in wheat species.     

Construction and characterization of a peanut HindIII BAC library

Bacterial artificial chromosome (BAC) libraries have been an essential tool for physical analyses of genomes of many crops. We constructed and characterized the first large-insert DNA library for Arachis hypogaea L. The HindIII BAC library contains 182,784 clones; only 5,484 (3%) had no inserts; and the average insert size is 104.05 kb. Chloroplast DNA contamination was very low, only nine clones, and r-DNA content was 1,208, 0.66% of clones. The depth of coverage is estimated to be 6.5 genome-equivalents, allowing the isolation of virtually any single-copy locus. This rate of coverage was confirmed with the application of 20 overgos, which identified 305 positive clones from the library. The identification of multiple loci by most probes in polyploids complicates anchoring of physical and genetic maps. We explored the practicality of a hybridization-based approach for determination of map locations of BAC clones in peanut by analyzing 94 clones detected by seven different overgos. The banding patterns on Southern blots were good predictors of contig composition; that is, the clones that shared the same size bands and ascribed to the same overgos usually also located in the same contigs. This BAC library has great potential to advance future research about the peanut genome.Requests for the BAC library (or subsets) should be directed to Dr. A. Paterson (paterson@uga.edu).     

Characterization of three maize bacterial artificial chromosome libraries toward anchoring of the physical map to the genetic map using high-density bacterial artificial chromosome filter hybridization

Three maize (Zea mays) bacterial artificial chromosome (BAC) libraries were constructed from inbred line B73. High-density filter sets from all three libraries, made using different restriction enzymes (HindIII, EcoRI, and MboI, respectively), were evaluated with a set of complex probes including the 185-bp knob repeat, ribosomal DNA, two telomere-associated repeat sequences, four centromere repeats, the mitochondrial genome, a multifragment chloroplast DNA probe, and bacteriophage lambda. The results indicate that the libraries are of high quality with low contamination by organellar and lambda-sequences. The use of libraries from multiple enzymes increased the chance of recovering each region of the genome. Ninety maize restriction fragment-length polymorphism core markers were hybridized to filters of the HindIII library, representing 6x coverage of the genome, to initiate development of a framework for anchoring BAC contigs to the intermated B73 x Mo17 genetic map and to mark the bin boundaries on the physical map. All of the clones used as hybridization probes detected at least three BACs. Twenty-two single-copy number core markers identified an average of 7.4 +/- 3.3 positive clones, consistent with the expectation of six clones. This information is integrated into fingerprinting data generated by the Arizona Genomics Institute to assemble the BAC contigs using fingerprint contig and contributed to the process of physical map construction.     

Comparative genomic analysis of sequences sampled from a small region on soybean (Glycine max) molecular linkage group G.

Eight DNA markers spanning an interval of approximately 10 centimorgans (cM) on soybean (Glycine max) molecular linkage group G (MLG-G) were used to identify bacterial artificial chromosome (BAC) clones. Twenty-eight BAC clones in eight distinct contiguous groups (contigs) were isolated from this genome region, along with 59 BAC clones on 17 contigs homoeologous to those on MLG-G. BAC clones in four of the MLG-G contigs were also digested to produce subclones and detailed physical maps. All of the BAC-ends were sequenced, as were the subclones, to estimate proportions in different sequence categories, compare similarities among homoeologs, and explore microsynteny with Arabidopsis. Homoeologous BAC contigs were enriched in repetitive sequences compared with those on MLG-G or the soybean genome as a whole. Fingerprint and cross-hybridization comparisons between MLG-G and homoeologous contigs revealed cases of highly similar physical organization between soybean duplicates, as did DNA sequence comparisons. Twenty-seven out of 78 total sequences on soybean MLG-G showed significant similarity to Arabidopsis. The homologs mapped to six compact genome segments in Arabidopsis, with the longest containing seven homologs spanning two million base pairs. These results extend previous observations of large-scale duplication and selective gene loss in Arabidopsis, suggesting that networks of conserved synteny between Arabidopsis and other angiosperm families can stretch over long physical distances.     

In vitro assessment of acetic-acid-soluble proteins (glutenin) toxicity in celiac disease

Acetic-acid-soluble storage proteins from gluten of the bread wheat cv. Sprint 3 were fractionated by adsorption chromatography on 2000 Å controlled-pore glass (CPG) beads, and glutenin polymers with molecular mass higher than 10⁷ Da and free from monomeric gliadins were recovered. The glutenin polymers were found to consist of high-molecular-weight (HMW) and low-molecular-weight (LMW) glutenin subunits. Peptic-tryptic (PT) digests of glutenins were examined for their agglutination activity on human myelogenous leukemia K 562(S) cells, agglutination being strongly correlated with toxicity for the celiac intestine. The peptide fraction at a concentration of 1 g/L of culture medium was able to agglutinate 30% of K 562(S) cells, suggesting a moderate toxic effect. This toxicity may be accounted for by homologies in amino acid sequences between glutenin subunits and α/β-and γ-gliadins. © 1997 John Wiley & Sons, Inc.     

A BAC-based physical map of the channel catfish genome

Catfish is the major aquaculture species in the United States. To enhance its genome studies involving genetic linkage and comparative mapping, a bacterial artificial chromosome (BAC) contig-based physical map of the channel catfish (Ictalurus punctatus) genome was generated using four-color fluorescence-based fingerprints. Fingerprints of 34,580 BAC clones (5.6x genome coverage) were generated for the FPC assembly of the BAC contigs. A total of 3307 contigs were assembled using a cutoff value of 1x10(-20). Each contig contains an average of 9.25 clones with an average size of 292 kb. The combined contig size for all contigs was 0.965 Gb, approximately the genome size of the channel catfish. The reliability of the contig assembly was assessed by both hybridization of gene probes to BAC clones contained in the fingerprinted assembly and validation of randomly selected contigs using overgo probes designed from BAC end sequences. The presented physical map should greatly enhance genome research in the catfish, particularly aiding in the identification of genomic regions containing genes underlying important performance traits.