Atomic force microscopy of supported planar membrane bilayers.

Membrane bilayers of dipalmitoyl phosphatidylcholine (DPPC) and dipalmitoyl phosphatidylethanolamine (DPPE) adsorbed to a freshly cleaved mica substrate have been imaged by Atomic Force Microscopy (AFM). The membranes were mounted for imaging by two methods: (a) by dialysis of a detergent solution of the lipid in the presence of the substrate material, and (b) by adsorption of lipid vesicles onto the substrate surface from a vesicle suspension. The images were taken in air, and show lipid bilayers adhering to the surface either in isolated patches or in continuous sheets, depending on the deposition conditions. Epifluorescence light-microscopy shows that the lipid is distributed on the substrate surfaces as seen in the AFM images. In some instances, when DPPE was used, whole, unfused vesicles, which were bound to the substrate, could be imaged by the AFM. Such membranes should be capable of acting as natural anchors for imaging membrane proteins by AFM.     

Atomic force microscopy of supported lipid bilayers

Supported lipid bilayers (SLBs) are widely used in biophysical research to investigate the properties of biological membranes and offer exciting prospects in nanobiotechnology. Atomic force microscopy (AFM) has become a well-established technique for imaging SLBs at nanometer resolution. A unique feature of AFM is its ability to monitor dynamic processes, such as the interaction of bilayers with proteins and drugs. Here, we present protocols for preparing dioleoylphosphatidylcholine/dipalmitoylphosphatidylcholine (DOPC/DPPC) bilayers supported on mica using small unilamellar vesicles and for imaging their nanoscale interaction with the antibiotic azithromycin using AFM. The entire protocol can be completed in 10 h.     

Atomic force microscopy of the submolecular architecture of hydrated ocular mucins.

High-resolution atomic force microscopy has been applied to the imaging of intact human ocular mucins in a near-physiological buffer. The mucins displayed a range of lengths from several hundred nanometers to several microns. By varying the ionic composition of the imaging environment, it was possible to image molecules rigidly fixed to the substrate and the motion of single molecules across the substrate. From static molecular images, high-resolution line profiles show a variation of up to +/-0.75 nm in thickness along the molecule. This variation is localized in regions of several tens of nanometers. It is interpreted in terms of the varying glycosylation along the mucin and is consistent with the known size of oligosaccharides in ocular mucins. The dynamic images indicate the possibility of following mucin interactions in situ.     

Atomic force microscopy of macromolecular interactions.

The introduction of functional imaging tools and techniques that operate at molecular-length scales has provided investigators with unique approaches to characterizing biomolecular structure and function relationships. Recent advances in the field of scanning probe techniques and, in particular, atomic force microscopy have yielded tantalizing insights into the dynamics of protein self-assembly and the mechanics of protein unfolding.     

Atomic force microscopy of DNA molecules.

DNA-cytochrome c complexes adsorbed on carbon-coated mica surfaces were directly imaged by atomic force microscopy in air using commercially available cantilevers, with a routine resolution of 6 nm. Images of M13 phage DNA and M13-DNA polymerase complex are also shown.     

Atomic force microscopy and electron microscopy analysis of retrovirus Gag proteins assembled in vitro on lipid bilayers

We have used an in vitro system that mimics the assembly of immature Moloney murine leukemia virus (M-MuLV) particles to examine how viral structural (Gag) proteins oligomerize at membrane interfaces. Ordered arrays of histidine-tagged Moloney capsid protein (his-MoCA) were obtained on membrane bilayers composed of phosphatidylcholine (PC) and the nickel-chelating lipid 1, 2-di-O-hexadecyl-sn-glycero-3-(1'-2"-R-hydroxy-3'N-(5-amino-1-carboxy pentyl)iminodiacetic acid)propyl ether (DHGN). The membrane-bound arrays were analyzed by electron microscopy (EM) and atomic force microscopy (AFM). Two-dimensional projection images obtained by EM showed that bilayer-bound his-MoCA proteins formed cages surrounding different types of protein-free cage holes with similar cage holes spaced at 81.5-A distances and distances between dissimilar cage holes of 45.5 A. AFM images, showing topological features viewed near the membrane-proximal domain of the his-MoCA protein, revealed a cage network of only symmetrical hexamers spaced at 79-A distances. These results are consistent with a model in which dimers constitute structural building blocks and where membrane-proximal and distal his-MoCA regions interact with different partners in membrane-bound arrays.     

Atomic force microscopy characterization of supported planar bilayers that mimic the mitochondrial inner membrane

In this study we examined the properties of supported planar bilayers (SPBs) formed from phospholipid components that comprise the mitochondrial inner membrane. We used 1-palmitoyl-2-oleoyl-sn-glycero- 3-phosphocholine (POPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and cardiolipin (CL). Liposomes of binary POPE:POPC (1:1, mol:mol) and ternary (POPE:POPC:CL (0.5:0.3:0.2, mol:mol:mol) composition were used in the formation of SPBs on mica. The characterization of the SPBs was carried out below (4 degrees C) and above (24 and 37 degrees C) the phase transition temperature (Tm) of the mixtures in solution. We observed: (i) that the thickness of the bilayers, calculated from a cross-sectional analysis, decreased as the visualization temperature increased; (ii) the existence of laterally segregated domains that respond to temperature in SPBs of POPE:POPC:CL; (iii) a decrease in height and an increase in roughness (Ra) of SPBs after cytochrome c (cyt c) injection at room temperature. To obtain further insight into the nature of the interaction between cyt c and the bilayers, the competition between 8-anilino-1-naphthalene sulfonate (ANS) and the protein for the same binding sites in liposomes was monitored by fluorescence. The results confirm the existence of preferential interaction of cyt c with CL containing liposomes. Taking these results and those of previous papers published by the group, we discuss the preferential adsorption of cyt c in CL domains. This provides support for the relevance of these phospholipids as a proton trap in the oxidative phosphorylation process that occurs in the energy transducing membranes.     

Atomic force microscopy studies of ganglioside GM1 domains in phosphatidylcholine and phosphatidylcholine/cholesterol bilayers.

The distribution of ganglioside in supported lipid bilayers has been studied by atomic force microscopy. Hybrid dipalmitoylphosphatidylcholine (DPPC)/dipalmitoylphosphatidylethanolamine (DPPE) and (2:1 DPPC/cholesterol)/DPPE bilayers were prepared using the Langmuir Blodgett technique. Egg PC and DPPC bilayers were prepared by vesicle fusion. Addition of ganglioside GM1 to each of the lipid bilayers resulted in the formation of heterogeneous surfaces that had numerous small raised domains (30--200 nm in diameter). Incubation of these bilayers with cholera toxin B subunit resulted in the detection of small protein aggregates, indicating specific binding of the protein to the GM1-rich microdomains. Similar results were obtained for DPPC, DPPC/cholesterol, and egg PC, demonstrating that the overall bilayer morphology was not dependent on the method of bilayer preparation or the fluidity of the lipid mixture. However, bilayers produced by vesicle fusion provided evidence for asymmetrically distributed GM1 domains that probably reflect the presence of ganglioside in both inner and outer monolayers of the initial vesicle. The results are discussed in relation to recent inconsistencies in the estimation of sizes of lipid rafts in model and natural membranes. It is hypothesized that small ganglioside-rich microdomains may exist within larger ordered domains in both natural and model membranes.     

Differences in hydrocarbon chain tilt between hydrated phosphatidylethanolamine and phosphatidylcholine bilayers. A molecular packing model.

Both wide-angle and lamellar x-ray diffraction data are interpreted in terms of a difference in hydrocarbon chain tilt between fully hydrated dipalmitoyl phosphatidylcholine (DPPC) and dipalmitoyl phosphatidylethanolamine (DPPE). Although the hydrocarbon chains of multilayers of DPPC tilt ty approximately 30 degrees relative to the normal to the plane of the bilayer, as previously reported by others, the hydrocarbon chains of DPPE appear to be oriented approximately normal to the plane of the bilayer. It is found that the chain tilt in DPPC bilayers can be reduced by either: (a) adding an n-alkane to the bilayer interiors or (b) adding lanthanum ions to the fluid layers between bilayers. A molecular packing model is presented which accounts for these data. According to this model, DPPC chains tilt because of the size and conformation of the PC polar head group.     

Atomic force microscopy and chemical force microscopy of microbial cells

Over the past years, atomic force microscopy (AFM) has emerged as a powerful tool for imaging the surface of microbial cells with nanometer resolution, and under physiological conditions. Moreover, chemical force microscopy (CFM) and single-molecule force spectroscopy have enabled researchers to map chemical groups and receptors on cell surfaces, providing valuable insight into their structure-function relationships. Here, we present protocols for analyzing spores of the pathogen Aspergillus fumigatus using real-time AFM imaging and CFM. We emphasize the use of porous polymer membranes for immobilizing single live cells, and the modification of gold-coated tips with alkanethiols for CFM measurements. We also discuss recording conditions and data interpretation, and provide recommendations for reliable experiments. For well-trained AFM users, the entire protocol can be completed in 2-3 d.     

Atomic force microscopy of the myosin molecule.

Atomic force microscopy (AFM) has been used to study the structure of rabbit skeletal muscle myosin deposited onto a mica substrate from glycerol solution. Images of the myosin molecule have been obtained using contact mode AFM with the sample immersed in propanol. The molecules have two heads at one end of a long tail and have an appearance similar to those prepared by glycerol deposition techniques for electron microscopy, except that the separation of the two heads is not so well defined. The average length of the tail (155 +/- 5 nm) agrees well with previous studies. Bends in the myosin tail have been observed at locations similar to those observed in the electron microscope. By raising the applied force, it has been possible locally to separate the two strands of the alpha-helical coiled-coil tail. We conclude that the glycerol-mica technique is a useful tool for the preparation of fibrous proteins for examination by scanning probe microscopy.     

Atomic force microscopy examination of the topography of a hydrated bacterial biofilm on a copper surface

A bacterium, designated CCI#8, that was isolated from a corroded copper coupon colonized both polished and unpolished copper surfaces under batch culture conditions. Atomic Force Microscopy (AFM) images revealed that the biofilm was heterogeneous in nature, both in depth and in cell distribution. Bacterial cells were shown to be associated with pits on the surface of the unpolished copper coupons. These observations support previous studies that CCI#8 is associated with the pitting corrosion of copper.     

Atomic force microscopy and proteins

This review briefly introduces the principles of atomic force microscopy (AFM) applied to protein samples. AFM provides three-dimensional surface images of the proteins with high resolution. The advantage of AFM for protein studies is that AFM can visualize directly the molecule under physiological conditions without previous treatment. AFM operated in the force-spectroscopy mode is now a widespread technique, often used to investigate ligand receptor interactions with the goal of measuring forces at the individual molecule level.     

Atomic force microscopy comes of age

AFM (atomic force microscopy) analysis, both of fixed cells, and live cells in physiological environments, is set to offer a step change in the research of cellular function. With the ability to map cell topography and morphology, provide structural details of surface proteins and their expression patterns and to detect pico‐Newton force interactions, AFM represents an exciting addition to the arsenal of the cell biologist. With the explosion of new applications, and the advent of combined instrumentation such as AFM—confocal systems, the biological application of AFM has come of age. The use of AFM in the area of biomedical research has been proposed for some time, and is one where a significant impact could be made. Fixed cell analysis provides qualitative and quantitative subcellular and surface data capable of revealing new biomarkers in medical pathologies. Image height and contrast, surface roughness, fractal, volume and force analysis provide a platform for the multiparameter analysis of cell and protein functions. Here, we review the current status of AFM in the field and discuss the important contribution AFM is poised to make in the understanding of biological systems.     

Atomic force microscopy of DNA in aqueous solutions.

DNA on mica can be imaged in the atomic force microscope (AFM) in water or in some buffers if the sample has first been dehydrated thoroughly with propanol or by baking in vacuum and if the sample is imaged with a tip that has been deposited in the scanning electron microscope (SEM). Without adequate dehydration or with an unmodified tip, the DNA is scraped off the substrate by AFM-imaging in aqueous solutions. The measured heights and widths of DNA are larger in aqueous solutions than in propanol. The measured lengths of DNA molecules are the same in propanol and in aqueous solutions and correspond to the base spacing for B-DNA, the hydrated form of DNA; when the DNA is again imaged in propanol after buffer, however, it shortens to the length expected for dehydrated A-DNA. Other results include the imaging of E. coli RNA polymerase bound to DNA in a propanol-water mixture and the observation that washing samples in the AFM is an effective way of disaggregating salt-DNA complexes. The ability to image DNA in aqueous solutions has potential applications for observing processes involving DNA in the AFM.     

Atomic force microscopy of single- and double-stranded DNA.

A method has been developed for imaging single-stranded DNA with the atomic force microscope (AFM). phi X174 single-stranded DNA in formaldehyde on mica can be imaged in the AFM under propanol or butanol or in air. Measured lengths of most molecules are on the order of 1 mu, although occasionally more extended molecules with lengths of 1.7 to 1.9 mu are seen. Single-stranded DNA in the AFM generally appears lumpier than double-stranded DNA, even when extended. Images of double-stranded lambda DNA in the AFM show more sharp kinks and bends than are typically observed in the electron microscope. Dense, aggregated fields of double-stranded plasmids can be converted by gentle rinsing with hot water to well spread fields.     

Micromanipulation of phospholipid bilayers by atomic force microscopy

The molecular details of adhesion mechanics in phospholipid bilayers have been studied using atomic force microscopy (AFM). Under tension fused bilayers of dipalmitoylphosphatidylcholine (DPPC) yield to give non-distance dependent and discrete force plateaux of 45.4, 81.6 and 113±3.5 pN. This behaviour may persist over distances as great as 400 nm and suggests the stable formation of a cylindrical tube which bridges the bilayers on the two surfaces. The stability of this connective structure may have implications for the formation of pili and hence for the initial stage of bacterial conjugation. Dimyristoylphosphatidylcholine (DMPC) bilayers also exhibit force plateaux but with a much less pronounced quantization. Bilayers composed of egg PC, sterylamine and cholesterol stressed in a similar way show complex behaviour which can in part be explained using the models demonstrated in the pure lipids.     

Micromanipulation of phospholipid bilayers by atomic force microscopy

The molecular details of adhesion mechanics in phospholipid bilayers have been studied using atomic force microscopy (AFM). Under tension fused bilayers of dipalmitoylphosphatidylcholine (DPPC) yield to give non-distance dependent and discrete force plateaux of 45.4, 81.6 and 113+/-3.5 pN. This behaviour may persist over distances as great as 400 nm and suggests the stable formation of a cylindrical tube which bridges the bilayers on the two surfaces. The stability of this connective structure may have implications for the formation of pili and hence for the initial stage of bacterial conjugation. Dimyristoylphosphatidylcholine (DMPC) bilayers also exhibit force plateaux but with a much less pronounced quantization. Bilayers composed of egg PC, sterylamine and cholesterol stressed in a similar way show complex behaviour which can in part be explained using the models demonstrated in the pure lipids.     

Atomic force microscopy of liposomes bearing fibrinogen

Extruded liposomes formed from dipalmitoylphosphatidylcholine and cholesterol, with and without fibrinogen, were examined by atomic force microscopy (AFM). The sequence of events involved in the transition from attached liposomes to bilayer patches on mica supports was viewed by tapping mode in liquid. After adhesion to the mica surface, both liposomes without fibrinogen and liposomes with attached fibrinogen collapsed into patches. The fibrinogen layer attached to the liposomes was 2.6 nm thick. This implied that the protein was spread over the entire liposome and the protein characteristic trinodular structure disappeared. To check the type of bond between fibrinogen and liposome, sequential images were taken after the incubation of fibrinogen with liposomes with and without a chemical group for attaching the protein. The results clearly confirmed that fibrinogen bound covalently to liposomes.     

Atomic force microscopy measurement of leukocyte-endothelial interaction

Leukocyte adhesion to vascular endothelium is a key initiating step in the pathogenesis of many inflammatory diseases. In this study, we present real-time force measurements of the interaction between monocytic human promyelocytic leukemia cells (HL-60) cells and a monolayer of human umbilical vein endothelial cells (HUVECs) by using atomic force microscopy (AFM). The detachment of HL-60-HUVEC conjugates involved a series of rupture events with force transitions of 40-100 pN. The integrated force of these rupture events provided a quantitative measure of the adhesion strength on a whole cell level. The AFM measurements revealed that HL-60 adhesion is heightened in the borders formed by adjacent HUVECs. The average force and mechanical work required to detach a single HL-60 from the borders of a tumor necrosis factor-alpha-activated HUVEC layer were twice as high as those of the HUVEC bodies. HL-60 adhesion to the monolayer was significantly reduced by a monoclonal antibody against beta1-integrins and partially inhibited by antibodies against selectins ICAM-1 and VCAM-1 but was not affected by anti-alphaVbeta3. Interestingly, adhesion was also inhibited in a dose-dependent manner (IC50 approximately 100 nM) by a cyclic arginine-glycine-aspartic acid (cRGD) peptide. This effect was mediated via interfering with the VLA-4-VCAM-1 binding. In parallel measurements, transmigration of HL-60 cells across a confluent HUVEC monolayer was inhibited by the cRGD peptide and by both anti-beta1 and anti-alphaVbeta3 antibodies. In conclusion, these data demonstrate the role played by beta1-integrins in leukocyte-endothelial adhesion and transmigration and the role played by alphaVbeta3 in transmigration, thus underscoring the high efficacy of cRGD peptide in blocking both the adhesion and transmigration of monocytes.