Structures of an Apo and a Binary Complex of an Evolved Archeal B Family DNA Polymerase Capable of Synthesising Highly Cy-Dye Labelled DNA

Thermophilic DNA polymerases of the polB family are of great importance in biotechnological applications including high-fidelity PCR. Of particular interest is the relative promiscuity of engineered versions of the exo- form of polymerases from the Thermo- and Pyrococcales families towards non-canonical substrates, which enables key advances in Next-generation sequencing. Despite this there is a paucity of structural information to guide further engineering of this group of polymerases. Here we report two structures, of the apo form and of a binary complex of a previously described variant (E10) of Pyrococcus furiosus (Pfu) polymerase with an ability to fully replace dCTP with Cyanine dye-labeled dCTP (Cy3-dCTP or Cy5-dCTP) in PCR and synthesise highly fluorescent “CyDNA” densely decorated with cyanine dye heterocycles. The apo form of Pfu-E10 closely matches reported apo form structures of wild-type Pfu. In contrast, the binary complex (in the replicative state with a duplex DNA oligonucleotide) reveals a closing movement of the thumb domain, increasing the contact surface with the nascent DNA duplex strand. Modelling based on the binary complex suggests how bulky fluorophores may be accommodated during processive synthesis and has aided the identification of residues important for the synthesis of unnatural nucleic acid polymers.     

Interactions of replication versus repair DNA substrates with the Pol I DNA polymerases from Escherichia coli and Thermus aquaticus

Different DNA polymerases partition differently between replication and repair pathways. In this study we examine if two Pol I family polymerases from evolutionarily distant organisms also differ in their preferences for replication versus repair substrates. The DNA binding preferences of Klenow and Klentaq DNA polymerases, from Escherichia coli and Thermus aquaticus respectively, have been studied using a fluorescence competition binding assay. Klenow polymerase binds primed-template DNA (the replication substrate) with up to 50× higher affinity than it binds to nicked DNA, DNA with a 2 base single-stranded gap, blunt-ended DNA, or to a DNA end with a 3′ overhang. In contrast, Klentaq binds all of these DNAs almost identically, indicating that Klenow has a stronger ability to discriminate between replication and repair substrates than Klentaq. In contrast, both polymerases bind mismatched primed-template and blunt-ended DNA tighter than they bind matched primed-template DNA, suggesting that these two proteins may share a similar mechanism to identify mismatched DNA, despite the fact that Klentaq has no proofreading ability. In addition, the presence or absence of 5′- or 3′-phosphates has slightly different effects on DNA binding by the two polymerases, but again reinforce Klenow's more effective substrate discrimination capability.     

A new thermostable DNA polymerase mixture for efficient amplification of long DNA fragments

The thermostable DNA polymerases have been used for amplification of DNA fragments since the invention of PCR. The constraint on the maximum size of the amplified fragments can be solved to certain level by the use of unbalanced mixtures of non-proofreading and proofreading thermostable DNA polymerases. In this study, we tested the use of a mixtures of N-terminal deletional variant of Taq polymerase—Klentaq278 and Tne polymerase from Thermotoga neapolitana. Klentaq278 and Tne polymerase genes were cloned and expressed in different expression vectors under tac promoter. The most efficient ratio of Klentaq278/Tne polymerase for amplification was 10: 1. The polymerase mixture of Klentaq278 and Tne polymerase is very effective in amplification of DNA fragments for up to 8 kb and is useful addition to a DNA polymerases used in long-range PCR.     

Challenging artificial genetic systems: thymidine analogs with 5-position sulfur functionality

Eight different polymerases, chosen from evolutionary families A (Taq, Tfl, HotTub and Tth) and B (Pfu, Pwo, Vent and Deep Vent), were examined for their ability to incorporate 5-position modified 2′-deoxyuridine derivatives that carry a protected thiol group appended via different linkers containing either three or four carbon atoms. This represents the first attempt to incorporate the thiol functionality into DNA via enzymatic synthesis. Each polymerase–substrate combination was evaluated using a hierarchy of increasingly more difficult challenges, starting with incorporation of a single derivative, proceeding to incorporation of two derivatives at adjacent sites and non-adjacent sites, then examining the ability of the polymerase to accept the derivative within the template, and concluding with a challenge involving PCR. The evaluation of thiol-bearing 2′-deoxyuridine derivatives was then extended to consider their chemical stabilities. Stability was found to be less than satisfactory when the thiol functionality has a ‘propargylic’ relationship to the unsaturation in the linker. The best polymerase–appendage combination used the polymerase from Pyrococcus woesei (Pwo) and the 5′-tBu-SS-CH₂-CH₂-CC- linker. This pair supported PCR amplification and therefore should have value in artificial in vitro selection experiments. Indeed, we discovered that Pwo and Pfu preferred the derivative triphosphate over TTP, the natural substrate, in competition studies. These studies confirm an earlier suggestion that membership of an evolutionary family of polymerases is a partial predictor of the ability of the polymerase to accept 5-modified 2′-deoxyuridines. Considerable differences are displayed by different members within a polymerase family, however. This remains curious, as the ability of the polymerase to replicate natural DNA with high fidelity and its propensity to exclude unnatural analogs are presumed to be correlated.     

The Steric Gate of DNA Polymerase ι Regulates Ribonucleotide Incorporation and Deoxyribonucleotide Fidelity

Accurate DNA synthesis in vivo depends on the ability of DNA polymerases to select dNTPs from a nucleotide pool dominated by NTPs. High fidelity replicative polymerases have evolved to efficiently exclude NTPs while copying long stretches of undamaged DNA. However, to bypass DNA damage, cells utilize specialized low fidelity polymerases to perform translesion DNA synthesis (TLS). Of interest is human DNA polymerase ι (pol ι), which has been implicated in TLS of oxidative and UV-induced lesions. Here, we evaluate the ability of pol ι to incorporate NTPs during DNA synthesis. pol ι incorporates and extends NTPs opposite damaged and undamaged template bases in a template-specific manner. The Y39A “steric gate” pol ι mutant is considerably more active in the presence of Mn²⁺ compared with Mg²⁺ and exhibits a marked increase in NTP incorporation and extension, and surprisingly, it also exhibits increased dNTP base selectivity. Our results indicate that a single residue in pol ι is able to discriminate between NTPs and dNTPs during DNA synthesis. Because wild-type pol ι incorporates NTPs in a template-specific manner, certain DNA sequences may be “at risk” for elevated mutagenesis during pol ι-dependent TLS. Molecular modeling indicates that the constricted active site of wild-type pol ι becomes more spacious in the Y39A variant. Therefore, the Y39A substitution not only permits incorporation of ribonucleotides but also causes the enzyme to favor faithful Watson-Crick base pairing over mutagenic configurations.     

Thermodynamics of the DNA Structural Selectivity of the Pol I DNA Polymerases from Escherichia coli and Thermus aquaticus

Understanding the thermodynamics of substrate selection by DNA polymerase I is important for characterizing the balance between replication and repair for this enzyme in vivo. Due to their sequence and structural similarities, Klenow and Klentaq, the large fragments of the Pol I DNA polymerases from Escherichia coli and Thermus aquaticus, are considered functional homologs. Klentaq, however, does not have a functional proofreading site. Examination of the DNA binding thermodynamics of Klenow and Klentaq to different DNA structures: single-stranded DNA (ss-DNA), primer-template DNA (pt-DNA), and blunt-end double-stranded DNA (ds-DNA) show that the binding selectivity pattern is similar when examined across a wide range of salt concentration, but can significantly differ at any individual salt concentration. For both proteins, binding of single-stranded DNA shifts from weakest to tightest binding of the three structures as the salt concentration increases. Both Klenow and Klentaq release two to three more ions when binding to pt-DNA and ds-DNA than when binding to ss-DNA. Klenow exhibits significant differences in the ΔC_p of binding to pt-DNA versus ds-DNA, and a difference in pI for these two complexes, whereas Klentaq does not, suggesting that Klenow and Klentaq discriminate between these two structures differently. Taken together, the data suggest that the two polymerases bind ds-DNA very differently, but that both bind pt-DNA and ss-DNA similarly, despite the absence of a proofreading site in Klentaq.     

Effect of manganese on in vitro replication of damaged DNA catalyzed by the herpes simplex virus type-1 DNA polymerase

In vitro bypass of damaged DNA by replicative DNA polymerases is usually blocked by helix-distorting or bulky DNA lesions. In this study, we report that substitution of the divalent metal ion Mg²⁺ with Mn²⁺ promotes quantitative replication of model DNA substrates containing the major cisplatin or N-2-acetylaminofluorene adducts by the catalytic subunit (UL30) of the replicative DNA polymerase of herpes simplex virus. The ability of Mn²⁺ ions to confer bypass of bulky lesions was not observed with other replicative DNA polymerases of the B family, such as bacteriophage T4 or δ polymerases. However, for these enzymes, manganese induced the incorporation of one nucleotide opposite the first (3′) guanine of the d(GpG) intrastrand cisplatin lesion. Translesion replication of the cisplatin adduct by UL30 led to the incorporation of mismatched bases, with the preferential incorporation of dAMP opposite the 3′ guanine of the lesion. Furthermore, substitution of MgCl₂ with MnCl₂ greatly inhibited the 3′ to 5′ exonuclease of UL30 but had a far lesser effect on that of T4 DNA polymerase. Finally, manganese induced a conformational change in the structure of UL30 bound to the platinated substrate. Taken together, the latter findings suggest a mechanism by which manganese might allow UL30 to efficiently promote translesion DNA synthesis in vitro.     

Different Behaviors In Vivo of Mutations in the β Hairpin Loop of the DNA Polymerases of the Closely Related Phages T4 and RB69

The T4 and RB69 DNA replicative polymerases are members of the B family and are highly similar. Both replicate DNA with high fidelity and employ the same mechanism that allows efficient switching of the primer terminus between the polymerase and exonuclease sites. Both polymerases have a β hairpin loop (hereafter called the β loop) in their exonuclease domains that plays an important role in active-site switching. The β loop is involved in strand separation and is needed to stabilize partially strand-separated exonuclease complexes. In T4 DNA polymerase, modification of the β-loop residue G255 to Ser confers a strong mutator phenotype in vivo due to a reduced ability to form editing complexes. Here, we describe the RB69 DNA polymerase mutant with the equivalent residue (G258) changed to Ser but showing only mild mutator activity in vivo. On the other hand, deletion of the tip of the RB69 β loop confers a strong mutator phenotype in vivo. Based on detailed mutational spectral analyses, DNA binding activities, and coupled polymerase/exonuclease assays, we define the differences between the T4 and RB69 polymerases. We propose that their β loops facilitate strand separation in both polymerases, while the residues that form the loop have low structural constraints.     

Thermodynamics of the binding of Thermus aquaticus DNA polymerase to primed-template DNA

DNA binding of the Type 1 DNA polymerase from Thermus aquaticus (Taq polymerase) and its Klentaq large fragment domain have been studied as a function of temperature. Equilibrium binding assays were performed from 5 to 70°C using a fluorescence anisotropy assay and from 10 to 60°C using isothermal titration calorimetry. In contrast to the usual behavior of thermophilic proteins at low temperatures, Taq and Klentaq bind DNA with high affinity at temperatures down to 5°C. The affinity is maximal at 40–50°C. The ΔH and ΔS of binding are highly temperature dependent, and the ΔCp of binding is –0.7 to –0.8 kcal/mol K, for both Taq and Klentaq, with good agreement between van’t Hoff and calorimetric values. Such a thermodynamic profile, however, is generally associated with sequence-specific DNA binding and not non- specific binding. Circular dichroism spectra show conformational rearrangements of both the DNA and the protein upon binding. The high ΔCp of Taq/Klentaq DNA binding may be correlated with structure-specific binding in analogy to sequence- specific binding, or may be a general characteristic of proteins that primarily bind non-specifically to DNA. The low temperature DNA binding of Taq/Klentaq is suggested to be a general characteristic of thermophilic DNA binding proteins.     

Def1 Promotes the Degradation of Pol3 for Polymerase Exchange to Occur During DNA-Damage–Induced Mutagenesis in Saccharomyces cerevisiae

DNA damages hinder the advance of replication forks because of the inability of the replicative polymerases to synthesize across most DNA lesions. Because stalled replication forks are prone to undergo DNA breakage and recombination that can lead to chromosomal rearrangements and cell death, cells possess different mechanisms to ensure the continuity of replication on damaged templates. Specialized, translesion synthesis (TLS) polymerases can take over synthesis at DNA damage sites. TLS polymerases synthesize DNA with a high error rate and are responsible for damage-induced mutagenesis, so their activity must be strictly regulated. However, the mechanism that allows their replacement of the replicative polymerase is unknown. Here, using protein complex purification and yeast genetic tools, we identify Def1 as a key factor for damage-induced mutagenesis in yeast. In in vivo experiments we demonstrate that upon DNA damage, Def1 promotes the ubiquitylation and subsequent proteasomal degradation of Pol3, the catalytic subunit of the replicative polymerase δ, whereas Pol31 and Pol32, the other two subunits of polymerase δ, are not affected. We also show that purified Pol31 and Pol32 can form a complex with the TLS polymerase Rev1. Our results imply that TLS polymerases carry out DNA lesion bypass only after the Def1-assisted removal of Pol3 from the stalled replication fork.     

Pre-steady-state Kinetic Analysis of a Family D DNA Polymerase from Thermococcus sp. 9°N Reveals Mechanisms for Archaeal Genomic Replication and Maintenance

Family D DNA polymerases (polDs) have been implicated as the major replicative polymerase in archaea, excluding the Crenarchaeota branch, and bear little sequence homology to other DNA polymerase families. Here we report a detailed kinetic analysis of nucleotide incorporation and exonuclease activity for a Family D DNA polymerase from Thermococcus sp. 9°N. Pre-steady-state single-turnover nucleotide incorporation assays were performed to obtain the kinetic parameters, k_pol and K_d, for correct nucleotide incorporation, incorrect nucleotide incorporation, and ribonucleotide incorporation by exonuclease-deficient polD. Correct nucleotide incorporation kinetics revealed a relatively slow maximal rate of polymerization (k_pol ∼2.5 s⁻¹) and especially tight nucleotide binding (K_d(dNTP) ∼1.7 μm), compared with DNA polymerases from Families A, B, C, X, and Y. Furthermore, pre-steady-state nucleotide incorporation assays revealed that polD prevents the incorporation of incorrect nucleotides and ribonucleotides primarily through reduced nucleotide binding affinity. Pre-steady-state single-turnover assays on wild-type 9°N polD were used to examine 3′-5′ exonuclease hydrolysis activity in the presence of Mg²⁺ and Mn²⁺. Interestingly, substituting Mn²⁺ for Mg²⁺ accelerated hydrolysis rates >40-fold (k_exo ≥110 s⁻¹ versus ≥2.5 s⁻¹). Preference for Mn²⁺ over Mg²⁺ in exonuclease hydrolysis activity is a property unique to the polD family. The kinetic assays performed in this work provide critical insight into the mechanisms that polD employs to accurately and efficiently replicate the archaeal genome. Furthermore, despite the unique properties of polD, this work suggests that a conserved polymerase kinetic pathway is present in all known DNA polymerase families.     

Replisome-mediated Translesion Synthesis and Leading Strand Template Lesion Skipping Are Competing Bypass Mechanisms

A number of different enzymatic pathways have evolved to ensure that DNA replication can proceed past template base damage. These pathways include lesion skipping by the replisome, replication fork regression followed by either correction of the damage and origin-independent replication restart or homologous recombination-mediated restart of replication downstream of the lesion, and bypass of the damage by a translesion synthesis DNA polymerase. We report here that of two translesion synthesis polymerases tested, only DNA polymerase IV, not DNA polymerase II, could engage productively with the Escherichia coli replisome to bypass leading strand template damage, despite the fact that both enzymes are shown to be interacting with the replicase. Inactivation of the 3′ → 5′ proofreading exonuclease of DNA polymerase II did not enable bypass. Bypass by DNA polymerase IV required its ability to interact with the β clamp and act as a translesion polymerase but did not require its “little finger” domain, a secondary region of interaction with the β clamp. Bypass by DNA polymerase IV came at the expense of the inherent leading strand lesion skipping activity of the replisome, indicating that they are competing reactions.     

Salt dependence of DNA binding by Thermus aquaticus and Escherichia coli DNA polymerases

DNA binding properties of the Type 1 DNA polymerases from Thermus aquaticus (Taq, Klentaq) and Escherichia coli (Klenow) have been examined as a function of [KCl] and [MgCl(2)]. Full-length Taq and its Klentaq "large fragment" behave similarly in all assays. The two different species of polymerases bind DNA with sub-micromolar affinities in very different salt concentration ranges. Consequently, at similar [KCl] the binding of Klenow is approximately 3 kcal/mol (150x) tighter than that of Taq/Klentaq to the same DNA. Linkage analysis reveals a net release of 2-3 ions upon DNA binding of Taq/Klentaq and 4-5 ions upon binding of Klenow. DNA binding of Taq at a higher temperature (60 degrees C) slightly decreases the ion release. Linkage analysis of binding versus [MgCl(2)] reports the ultimate release of approximately 1 Mg(2+) ion upon complex formation. However, the MgCl(2) dependence for Klenow, but not Klentaq, shows two distinct phases. In 10 mm EDTA, both polymerase species still bind DNA, but their binding affinity is significantly diminished, Klenow more than Klentaq. In summary, the two polymerase species, when binding to identical DNA, differ substantially in their sensitivity to the salt concentration range, bind with very different affinities when compared under similar conditions, release different numbers of ions upon binding, and differ in their interactions with divalent cations.     

Evidence for a Watson-Crick hydrogen bonding requirement in DNA synthesis by human DNA polymerase kappa

The efficiency and fidelity of nucleotide incorporation by high-fidelity replicative DNA polymerases (Pols) are governed by the geometric constraints imposed upon the nascent base pair by the active site. Consequently, these polymerases can efficiently and accurately replicate through the template bases which are isosteric to natural DNA bases but which lack the ability to engage in Watson-Crick (W-C) hydrogen bonding. DNA synthesis by Poleta, a low-fidelity polymerase able to replicate through DNA lesions, however, is inhibited in the presence of such an analog, suggesting a dependence of this polymerase upon W-C hydrogen bonding. Here we examine whether human Polkappa, which differs from Poleta in having a higher fidelity and which, unlike Poleta, is inhibited at inserting nucleotides opposite DNA lesions, shows less of a dependence upon W-C hydrogen bonding than does Poleta. We find that an isosteric thymidine analog is replicated with low efficiency by Polkappa, whereas a nucleobase analog lacking minor-groove H bonding potential is replicated with high efficiency. These observations suggest that both Poleta and Polkappa rely on W-C hydrogen bonding for localizing the nascent base pair in the active site for the polymerization reaction to occur, thus overcoming these enzymes' low geometric selectivity.     

Exploration of factors driving incorporation of unnatural dNTPS into DNA by Klenow fragment (DNA polymerase I) and DNA polymerase alpha

In order to further understand how DNA polymerases discriminate against incorrect dNTPs, we synthesized two sets of dNTP analogues and tested them as substrates for DNA polymerase α (pol α) and Klenow fragment (exo⁻) of DNA polymerase I (Escherichia coli). One set of analogues was designed to test the importance of the electronic nature of the base. The bases consisted of a benzimidazole ring with one or two exocyclic substituent(s) that are either electron-donating (methyl and methoxy) or electron-withdrawing (trifluoromethyl and dinitro). Both pol α and Klenow fragment exhibit a remarkable inability to discriminate against these analogues as compared to their ability to discriminate against incorrect natural dNTPs. Neither polymerase shows any distinct electronic or steric preferences for analogue incorporation. The other set of analogues, designed to examine the importance of hydrophobicity in dNTP incorporation, consists of a set of four regioisomers of trifluoromethyl benzimidazole. Whereas pol α and Klenow fragment exhibited minimal discrimination against the 5- and 6-regioisomers, they discriminated much more effectively against the 4- and 7-regioisomers. Since all four of these analogues will have similar hydrophobicity and stacking ability, these data indicate that hydrophobicity and stacking ability alone cannot account for the inability of pol α and Klenow fragment to discriminate against unnatural bases. After incorporation, however, both sets of analogues were not efficiently elongated. These results suggest that factors other than hydrophobicity, sterics and electronics govern the incorporation of dNTPs into DNA by pol α and Klenow fragment.     

Switching between polymerase and exonuclease sites in DNA polymerase ε

The balance between exonuclease and polymerase activities promotes DNA synthesis over degradation when nucleotides are correctly added to the new strand by replicative B-family polymerases. Misincorporations shift the balance toward the exonuclease site, and the balance tips back in favor of DNA synthesis when the incorrect nucleotides have been removed. Most B-family DNA polymerases have an extended β-hairpin loop that appears to be important for switching from the exonuclease site to the polymerase site, a process that affects fidelity of the DNA polymerase. Here, we show that DNA polymerase ε can switch between the polymerase site and exonuclease site in a processive manner despite the absence of an extended β-hairpin loop. K967 and R988 are two conserved amino acids in the palm and thumb domain that interact with bases on the primer strand in the minor groove at positions n−2 and n−4/n−5, respectively. DNA polymerase ε depends on both K967 and R988 to stabilize the 3′-terminus of the DNA within the polymerase site and on R988 to processively switch between the exonuclease and polymerase sites. Based on a structural alignment with DNA polymerase δ, we propose that arginines corresponding to R988 might have a similar function in other B-family polymerases.     

Dynamic assembly of primers on nucleic acid templates

A strategy is presented that uses dynamic equlibria to assemble in situ composite DNA polymerase primers, having lengths of 14 or 16 nt, from DNA fragments that are 6 or 8 nt in length. In this implementation, the fragments are transiently joined under conditions of dynamic equilibrium by an imine linker, which has a dissociation constant of ~1 μM. If a polymerase is able to extend the composite, but not the fragments, it is possible to prime the synthesis of a target DNA molecule under conditions where two useful specificities are combined: (i) single nucleotide discrimination that is characteristic of short oligonucleotide duplexes (four to six nucleobase pairs in length), which effectively excludes single mismatches, and (ii) an overall specificity of priming that is characteristic of long (14 to 16mers) oligonucleotides, potentially unique within a genome. We report here the screening of a series of polymerases that combine an ability not to accept short primer fragments with an ability to accept the long composite primer held together by an unnatural imine linkage. Several polymerases were found that achieve this combination, permitting the implementation of the dynamic combinatorial chemical strategy.     

Uracil recognition by replicative DNA polymerases is limited to the archaea, not occurring with bacteria and eukarya

Family B DNA polymerases from archaea such as Pyrococcus furiosus, which live at temperatures ~100°C, specifically recognize uracil in DNA templates and stall replication in response to this base. Here it is demonstrated that interaction with uracil is not restricted to hyperthermophilic archaea and that the polymerase from mesophilic Methanosarcina acetivorans shows identical behaviour. The family B DNA polymerases replicate the genomes of archaea, one of the three fundamental domains of life. This publication further shows that the DNA replicating polymerases from the other two domains, bacteria (polymerase III) and eukaryotes (polymerases δ and ε for nuclear DNA and polymerase γ for mitochondrial) are also unable to recognize uracil. Uracil occurs in DNA as a result of deamination of cytosine, either in G:C base-pairs or, more rapidly, in single stranded regions produced, for example, during replication. The resulting G:U mis-pairs/single stranded uracils are promutagenic and, unless repaired, give rise to G:C to A:T transitions in 50% of the progeny. The confinement of uracil recognition to polymerases of the archaeal domain is discussed in terms of the DNA repair pathways necessary for the elimination of uracil.     

Translesion Synthesis of Abasic Sites by Yeast DNA Polymerase ?

Studies of replicative DNA polymerases have led to the generalization that abasic sites are strong blocks to DNA replication. Here we show that yeast replicative DNA polymerase ϵ bypasses a model abasic site with comparable efficiency to Pol η and Dpo4, two translesion polymerases. DNA polymerase ϵ also exhibited high bypass efficiency with a natural abasic site on the template. Translesion synthesis primarily resulted in deletions. In cases where only a single nucleotide was inserted, dATP was the preferred nucleotide opposite the natural abasic site. In contrast to translesion polymerases, DNA polymerase ϵ with 3′–5′ proofreading exonuclease activity bypasses only the model abasic site during processive synthesis and cannot reinitiate DNA synthesis. This characteristic may allow other pathways to rescue leading strand synthesis when stalled at an abasic site.     

Replication of damaged DNA

DNA damage is generated continually inside cells. In order to be able to replicate past damaged bases (translesion synthesis), the cell employs a series of specialised DNA polymerases, which singly or in combination, are able to bypass many different types of damage. The polymerases have similar structural domains to classical polymerases, but they have a more open structure to allow altered bases to fit into their active sites. Although not required for replication of undamaged DNA, some at least of these polymerases are located in replication factories. Emerging evidence suggests that the polymerase switch from replicative to translesion polymerases might be mediated by post-translational modifications.