Balanced-size and long-size cloning of full-length, cap-trapped cDNAs into vectors of the novel lambda-FLC family allows enhanced gene discovery rate and functional analysis.

We have developed a new class of cloning vectors: lambda-full-length cDNA (lambda-FLC) cloning vectors. These vectors can be bulk-excised for preparing full-length cDNA libraries in which a high proportion of the plasmids carry large inserts that can be transferred into other (for example, functional) vectors. Unlike other cloning vectors, lambda-FLC vectors accommodate a broad range of sizes of eukaryotic cDNA inserts because they contain "size balancers." Further, the main protocol we use for direct bulk excision of plasmids is mediated by a Cre-lox system and is apparently free of size bias. The average size of the inserts from excised plasmid cDNA libraries was 2.9 kb for standard and 6.9 kb for size-selected cDNA. The average insert size of the full-length cDNA libraries was correlated to the rate of new gene discovery, suggesting that effectively cloning rarely expressed mRNAs requires vectors that can accommodate large inserts from a variety of sources. Part of the vectors are also suitable for bulk transfer of inserts into various functional vectors.     

A highly efficient directional cDNA cloning method utilizing an asymmetrically tailed linker-primer plasmid.

A new procedure using an asymmetrically tailed linker-primer plasmid has been developed to prepare extremely high complexity cDNA libraries. This procedure yields plasmid primed libraries with a final form equivalent to those made by the procedure of Okayama and Berg. However, the number of steps involved in library preparation is decreased. The form of the vector is such that one end of the linearized linker-primer plasmid has a 3' terminal extension of 40 deoxythymidylate residues (the dT end). The other end has a 3' terminal extension of 10 deoxycytidylate residues (the dC end). The dC end of the plasmid is blocked to further 3' extension by a 3' phosphate group. This configuration enables one to prime first strand cDNA synthesis at the dT end, tail the 3' end of the cDNA with deoxyguanylate residues without tailing the dC end (due to the 3' phosphate block). The plasmid primed cDNA can then be self-annealed and the 3' phosphate blocking group removed during the synthesis of double stranded cDNA. The efficiency of this procedure is significantly higher than other methods (including phage based libraries): linker-primer libraries have 15 to 900-fold higher complexity than libraries prepared by other methods. A cloning efficiency of 9 x 10(8) colonies per microgram of linker-primer DNA was achieved. This method should be useful for the cloning of cDNAs corresponding to extremely rare mRNAs.     

Size-selection of cDNA libraries for the cloning of cDNAs after suppression subtractive hybridization

Here we describe the establishment of size-selected cDNA libraries for the cloning of full-length cDNAs that were initially identified by suppression subtractive hybridization (SSH) technology as being differentially expressed. First, the SSH-cDNA fragments were used as 32P-probes to verify their level and differential pattern of expression by virtual Northern and to establish their corresponding full-length cDNA size. Second, cDNAs were separated by size on agarose gels and used to construct size-selected cDNA plasmid libraries, which were then screened by colony hybridization with the SSH-cDNA fragments. We conclude that the described approach complements SSH technology by allowing efficient cloning and characterization of the corresponding full-length cDNA from any desired cell type or species. This approach will give researchers the ability to specifically target and study differentially expressed genes in an efficient manner for functional genomic studies.     

A simple,rapid, efficient and inexpensive strategy for sequencing clones from cDNA libraries

In this report, we describe a simple, rapid, efficient and inexpensive strategy for sequencing inserted DNAs from clones of cDNA or gDNA libraries. This strategy uses PCR products directly amplified from transformed bacterial colonies, with universal primers within the vector. The method can be applied for sequencing cDNA or gDNA libraries with up to 4 ∼ 5 kb insert sizes, without overnight liquid culture or plasmid DNA preparation steps. We successfully used this method to analyze clones from full-length, enriched cDNA libraries. Although simple, following this strategy will significantly help researchers to avoid unnecessary steps in the analysis of a cDNA library.     

Isolation of the lysozyme gene of chicken.

The lysozyme gene has been purified by molecular cloning from two chicken gene libraries. Several recombinant phages harbouring sequences homologous to a plasmid carrying a double stranded lysozyme cDNA have been isolated. One recombinant appears to carry an entire lysozyme gene. Electron microscopic studies show that the latter is split by at least three introns. The length of the gene is about 3.9 kb, 6 times longer than lysozyme mRNA.     

Efficient cloning of full-length cDNAs based on cDNA size fractionation

The ability to generate and obtain full-length (FL) cDNAs is of critical importance to the field of genomics. Most cDNAs in a traditional cDNA library lack the initiating 5' ATG, making it difficult to obtain a FL clone. We report here on an improved protocol for the preparation of FL enriched cDNA libraries. We demonstrate that if good quality RNA is used in the cDNA synthesis, high-quality, FL cDNA can be generated for messages upward of 7 kb. In addition, we demonstrate the utility of size fractionation as a means to produce libraries containing a high percentage of initiating 5' ATG containing clones with insert sizes greater than 4 kb. The method is simple, cost efficient, and can be performed in most laboratories equipped to perform molecular biology. Lastly, the novel methodologies used in the analysis of the cDNA and library should prove useful to others working to create high-quality cDNA libraries.     

Subtraction of cap-trapped full-length cDNA libraries to select rare transcripts

The normalization and subtraction of highly expressed cDNAs from relatively large tissues before cloning dramatically enhanced the gene discovery by sequencing for the mouse full-length cDNA encyclopedia, but these methods have not been suitable for limited RNA materials. To normalize and subtract full-length cDNA libraries derived from limited quantities of total RNA, here we report a method to subtract plasmid libraries excised from size-unbiased amplified lambda phage cDNA libraries that avoids heavily biasing steps such as PCR and plasmid library amplification. The proportion of full-length cDNAs and the gene discovery rate are high, and library diversity can be validated by in silico randomization.     

A simple and versatile method for the preparation of vector-primers by adapter-end-primer ligation

A group of efficient cDNA cloning strategies employs vector-primers where cDNA synthesis starts from the oligo(dT)-primer tail, which is conventionally attached to cloning vectors by use of terminal deoxynucleotidyl transferase. An alternative, efficient and more versatile method of vector-primer preparation is to directly ligate, by use of T4 DNA ligase, a double-digested vector, e.g., pTZ18R/Pst I/Bam HI, to a synthetic (Bam HI)-adapter-end-primer, 5'-pGATCC-Tn or 5'-pGATCC-site-specific sequence. The use of a utility-vector containing a sizable spacer between the two selected restriction sites enables unambiguous separation on agarose gels of the double-digested vector precursors from single-digested ones, further simplifying the vector preparation. The adapter-end-primer ligation method can be applied to any suitable vectors with multiple cloning sites for the preparation of not only oligo(dT)-tailed, but also site-specific sequence-tailed vectors. Thus, the method enables the cDNA cloning of total poly (A+)-mRNAs, as well as specific RNA or mRNA species with or without poly(A)-tail.     

Expression sequence tag-specific full-length cDNA cloning: actin cDNAs

Current strategies for cDNA cloning are based on construction of cDNA libraries and colony screening. The process of obtaining a full-length cDNA clone can be highly time and labor intensive. Using the human actin gene as a model target cDNA, we have developed an RNA-capture method for rapid cloning of full-length cDNAs. The approach involves the capture of mRNA with expressed sequence tag (EST)-derived, biotin labeled antisense "capture" primers and streptavidin-coated magnetic beads. Full-length cDNA is then synthesized from purified EST-specific mRNA and cloned directly into plasmid vectors. The results of using beta-actin-based capture primers on cytoplasmic RNA were the isolation of both beta- and gamma-actin cDNA clones. Of the 16 actin-specific cDNA clones analyzed, 15 (93%) were full-length. This approach for cloning full-length cDNAs from available ESTs or partial cDNA sequences will facilitate a more rapid and efficient characterization of gene structure and function.     

A simple method for obtaining cell-specific cDNA from small numbers of growing root-hair cells in Arabidopsis thaliana

A simple and rapid method for cloning specific cDNAs from mRNA populations derived solely from small numbers of root-hair cells is described here. To identify genes expressed during the earliest visible stage of root-hair cell development, cell contents were aspirated from small numbers of Arabidopsis root-hair cells at or just before this stage. This material was used to make reusable solid-phase oligo-dT-primed cDNA libraries. To demonstrate that the libraries contained high quality longer cDNAs, a fragment located 2.7 kb from the 3' end of the cDNA of the single copy root-hair expressed gene RHD3 was cloned using a nested PCR strategy. This technique was also used to obtain novel gene expression information by cloning the full-length 0.85 kb cDNA of the Rop2 GTPase from this library. This approach offers a means of cloning larger cDNAs directly from small numbers of growing root-hair cells and, potentially, other epidermal cell types.     

Direct cloning of cDNA inserts from lambda gt11 phage DNA into a plasmid vector by a novel and simple method

Bacteriophage lambda gt11 has been used quite extensively for producing cDNA libraries. The cDNA inserts are usually subcloned into a plasmid vector for large scale production and analysis. However, isolating the recombinant DNA of interest from the phage clones can be a tedious task. Since the E. coli strain Y1088 used for lambda gt11 phage infection carries a pBR322-derived plasmid endogenously, we reasoned that this endogenous plasmid could be used directly for cloning the cDNA phage insert. In this report, we describe a method in which cDNA inserts from lambda gt11 phage were cloned directly into the pBR322 plasmid vector, bypassing the time-consuming procedures of preparing plasmid DNA as a subcloning vector. This method is likely to be extended to the cloning of DNA inserts derived from other phage lambda vectors when bacteria containing endogenous pBR322 are used as host cells.     

Direct cloning of cDNA inserts from λgt11 phage DNA into a plasmid vector by a novel and simple method

Bacteriophage λgt11 has been used quite extensively for producing cDNA libraries. The cDNA inserts are usually subcloned into a plasmid vector for large scale production and analysis. However, isolating the recombinant DNA of interest from the phage clones can be a tedious task. Since the E. coli strain Y1088 used for λgt11 phage infection carries a pBR322-derived plasmid endogenously, we reasoned that this endogenous plasmid could be used directly for cloning the cDNA phage insert. In this report, we describe a method in which cDNA inserts from λgt11 phage were cloned directly into the pBR322 plasmid vector, by-passing the time-consuming procedures of preparing plasmid DNA as a subcloning vector. This method is likely to be extended to the cloning of DNA inserts derived from other phage λ vectors when bacteria containing endogenous pBR322 are used as host cells.     

A simple and efficient procedure for generating stable expression libraries by cDNA cloning in a retroviral vector.

cDNA expression cloning is a powerful method for the rescue and identification of genes that are able to confer a readily identifiable phenotype on specific cell types. Retroviral vectors provide several advantages over DNA-mediated gene transfer for the introduction of expression libraries into eukaryotic cells since they can be used to express genes in a wide range of cell types, including those that form important experimental systems such as the hemopoietic system. We describe here a straightforward and efficient method for generating expression libraries by using a murine retroviral vector. Essentially, the method involves the directional cloning of cDNA into the retroviral vector and the generation of pools of stable ecotropic virus producing cells from this DNA. The cells so derived constitute the library, and the virus they yield is used to infect appropriate target cells for subsequent functional screening. We have demonstrated the feasibility of this procedure by constructing several large retroviral libraries (10(5) to 10(6) individual clones) and then using one of these libraries to isolate cDNAs for interleukin-3 and granulocyte-macrophage colony-stimulating factor on the basis of the ability of these factors to confer autonomous growth on the factor-dependent hemopoietic cell line FDC-P1. Moreover, the frequency at which these factor-independent clones were isolated approximated the frequency at which they were represented in the original plasmid library. These results suggest that expression cloning with retroviruses is a practical and efficient procedure and should be a valuable method for the isolation of important regulatory genes.