Bioactive polymers. 56: urease immobilization on carboxymethylcellulose

This article reports on the reaction of urease immobilization through its covalent bonding on carboxymethylcellulose. The reaction is activated by dicyclohexylcarbodiimide. The coupling reaction is influenced by the enzyme-support and activator-support ratios, as well as by duration. Starting from a rotating, composed experimental program of the second order, the function correlating the activity of the immobilized enzyme with the reaction parameters is established. Immobilized urease exhibits thermal stability higher than that of free enzyme, regarding both pH and the inhibiting action of some metal ions or organic substances. The stability over time of the immobilized urease is high, its enzymatic activity being maintained at over 85% of the initial value three months after synthesis.     

Immobilization of urease on vermiculite

Urease (EC 3.5.1.5) of high activity was obtained when the enzyme was immobilized on vermiculite crosslinked with 2.5% glutaraldehyde in chilled EDTA-phosphate buffer (pH 5.5). The highest activity of the immobilized enzyme was at 65°C and pH 6.5 while the optimum temperature for free urease was found to be 25°C. The thermal stability of immobilized urease was observed to be much better than that of the free urease. When stored at 4°C, urease immobilized on vermiculite retained 69 to 81% of its activity after 60 days and 61 to 75% of its original activity was retained after 4 repeated uses.     

Stabilization of pyrroloquinoline quinone glucose dehydrogenase by cross-linking chemical modification

Summary Cross-linking chemical modification of pyrroloquinoline quinone (PQQ) glucose dehydrogenase (GDH) by glutaraldehyde was carried out and its stability was analyzed. Although native PQQGDH was inactivated within 30 min at a higher temperature than 50 °C, cross-linked PQQGDH retained more than 40% of initial activity even after 30 min of incubation at 54 °C. In addition to the increase in thermal stability, cross-linked PQQGDH gained high EDTA tolerance. The stabilization may be achieved by increased the rigidity of PQQGDH holo enzyme conformation.     

Study of immobilization and properties of urease for creation of a biosensor based on semiconductor structures]

Many-sided investigations of urease immobilization methods were carried out to create the biosensor devices on the base of semiconductor structures. Special attention was concentrated on the biomembrane formation by means of urease and bovine serum albumin (BSA) cross-linking by gaseous glutaraldehyde. Optimal conditions for the formation process were selected which preserve about 20% of total urease activity after the cross-linking. The properties of enzyme immobilized by the above-mentioned method have been comprehensively studied. They included the urease activity dependence on pH, ionic strength, incubation buffer capacity as well as the enzyme stability during its functioning, storing and thermoinactivation. As was shown, for immobilized ureas Km value for urea at pH 7.0 and 20 degrees C is 1.65 time less than for free enzyme. In the presence of EDTA (1 mM) the enzyme activity in the biomembrane is practically unchanged under a month storing. Biomembrane possesses good adhesion to silicon surface and its swelling level under different conditions does not exceed 35%. The conclusion is made about the prospects of the used method of biomembrane formation for biosensor technology based on semiconductor structures.     

High initial activity but low storage stability observed for several preparations of subtilisin Carslberg suspended in organic solvents

Colyophilization with methyl-beta-cyclodextrin activates subtilisin Carlsberg by more than 200-fold in organic solvents, though this is a short-lived effect. About 93% of the enzyme's high initial activity observed in THF (at 45 degrees C) decreases exponentially with a t(1/2) of 1.8 h, until it reaches a residual activity (of 7%) that remains constant throughout the 4 days duration of the experiment. A further study of this enzyme reveals a general trend: the initial activities of the lyophilized powder and the cross-linked enzyme crystals are also greatly reduced upon incubation in this solvent, although these preparations retain 50% of their activity after about 20 h of incubation. All of the preparations studied retained some residual activity (which persisted throughout the duration of the experiments) after the initial exponential decay. The data here presented suggest that the mode of enzyme preparation is an important issue to consider when planning lengthy reactions.     

Stabilization of immobilized glucose oxidase against thermal inactivation by silanization for biosensor applications

An important requirement of immobilized enzyme based biosensors is the thermal stability of the enzyme. Studies were carried out to increase thermal stability of glucose oxidase (GOD) for biosensor applications. Immobilization of the enzyme was carried out using glass beads as support and the effect of silane concentration (in the range 1-10%) during the silanization step on the thermal stability of GOD has been investigated. Upon incubation at 70 degrees C for 3h, the activity retention with 1% silane was only 23%, which increased with silane concentration to reach a maximum up to 250% of the initial activity with 4% silane. Above this concentration the activity decreased. The increased stability of the enzyme in the presence of high silane concentrations may be attributed to the increase in the surface hydrophobicity of the support. The decrease in the enzyme stability for silane concentrations above 4% was apparently due to the uneven deposition of the silane layer on the glass bead support. Further work on thermal stability above 70 degrees C was carried out by using 4% silane and it was found that the enzyme was stable up to 75 degrees C with an increased activity of 180% after 3-h incubation. Although silanization has been used for the modification of the supports for immobilization of enzymes, the use of higher concentrations to stabilize immobilized enzymes is being reported for the first time.     

Preparation and characterization of urease immobilized onto porous chitosan beads for urea hydrolysis

Urease was covalently immobilized onto porous chitosan beads via primary amine groups connected to the backbone via a six-carbon linear alkyl spacer. The optimum conditions for enzyme immobilization are activating the beads with 1%(w/w) glutaraldehyde, reacting the activated beads in pH 7 buffer with the enzyme, using an enzyme to bead weight ratio of 25, and without lyophilization. Chitosan-bound urease was found to fully retain its specific activity. Properties of the immobilized urease were characterized under batch and flow conditions. Increased optimum reaction temperature, enhanced thermal stability and storage stability, and excellent reusability were found after enzyme immobilization. Continuous hydrolysis of urea solution was studied in a column packed with the enzyme-containing beads for its possible application in regenerating dialysate solution during hemodialysis.     

Stabilization of native and immobilized urease

The stability of native and immobilized urease isolated from Staphylococcus saprophyticus was studied at 4 degrees and 25 degrees C. The activity yield was 20% and 1.4% on the enzyme immobilization in albumin gel and latex membrane, respectively. Inactivation of native microbial urease proceeded 10 times slower in the solution containing 1 mM EDTA and 30 mM sodium sulfite. This solution contributed to a great extent to stabilization of immobilized urease both during storage in the phosphate buffer solution and in case of lyophilization.     

Immobilization of chitosan-invertase neoglycoconjugate on carboxymethylcellulose-modified chitin

Saccharomyces cerevisiae invertase, chemically modified with chitosan, was immobilized on a carboxymethylcellulose-coated chitin support via polyelectrolyte complex formation. The yield of immobilized protein was determined to be 72% and the enzyme retained 68% of the initial invertase activity. The optimum temperature for invertase was increased by 5 degrees C and its thermostability was enhanced by about 9 degrees C after immobilization. The immobilized enzyme was stable against incubation in high ionic strength solutions and was 12.6-fold more resistant to thermal treatment at 65 degrees C than the native counterpart. The prepared biocatalyst retained 98% and 100% of the original catalytic activity after 10 cycles of reuse and 70 h of continuous operational regime in a packed bed reactor, respectively. The immobilized enzyme retained 95% of its activity after 50 days of storage at 37 degrees C.     

Optimization of the conditions of immobilization of enzymes in a photopolymeric membrane

The residual activity of enzymes immobilized in the membrane on the basis on 1-vinyl-2-pyrrolidinone as photopolymerizable composition is studied. It is established, that under conditions of the immobilization at 20 degrees C the residual activity glucoseoxidase is about 35% from a initial level, horseredish peroxidase and urease from Jeack beans--42% and 20%, respectively. In case of an immobilization of beta-glucoseoxidase -50 degrees C it reaches almost 50% from a initial level. It was investigated the influence of different sources of UV-radiation and different substances on stability of the enzymes in the composition and in the immobilization matrix at storage. Dynamic of changes of enzyme activity at the photoimmobilization was characterized, and also the requirements for providing of its maximal storage was selected.     

Urease immobilized on nylon: preparation and properties

Urease (EC 3.5.1.5) was covalently attached through glutaraldehyde to partially hydrolysed nylon 6/6 tubes. The highest activity of immobilized enzyme was obtained at 65?°C and pH 6.5, while the optimum temperature for free urease was found to be 25?°C. Immobilized urease showed an improved thermal stability in comparison to free urease. It retained 76% of the original activity after 60 days when stored at 4?°C and 78% of the activity after 5 repeated uses.     

Synthesis of urease hybrid nanoflowers and their enhanced catalytic properties

Increasing numbers of materials have been extensively used as platforms for enzyme immobilization to enhance catalytic activity and stability. Although stability of enzyme was accomplished with immobilization approaches, activity of the most of the enzymes was declined after immobilization. Herein, we synthesize the flower shaped-hybrid nanomaterials called hybrid nanoflower (HNF) consisting of urease enzyme and copper ions (Cu²⁺) and report a mechanistic elucidation of enhancement in both activity and stability of the HNF. We demonstrated how experimental factors influence morphology of the HNF. We proved that the HNF (synthesized from 0.02 mg mL⁻¹ urease in 10 mM PBS (pH 7.4) at +4 °C) exhibited the highest catalytic activity of ∼2000% and ∼4000% when stored at +4 °C and RT, respectively compared to free urease. The highest stability was also achieved by this HNF by maintaining 96.3% and 90.28% of its initial activity within storage of 30 days at +4 °C and RT, respectively. This dramatically enhanced activity is attributed to high surface area, nanoscale-entrapped urease and favorable urease conformation of the HNF. The exceptional catalytic activity and stability properties of HNF can be taken advantage of to use it in fields of biomedicine and chemistry.     

Stabilization of Penicillium occitanis cellulases by spray drying in presence of Maltodextrin

The stabilization of fungal cellulases by spray drying, the thermal stability of Penicillium occitanis cellulases and the effect of some additives were studied. We observed that CMCase activity presents a good stability at 50 degrees C, even after 60 h of incubation. On the other hand, beta-glucosidase activity was more sensitive (loss of 50%) and reacts on total cellulases activities (Filter paper activities). The addition of hydrophilic agents such as ethylene glycol, polyethylene glycol (PEG6000) enhanced enzyme activity. The effect of PEG and Maltodextrin, another water activity decreasing agent, were then tested during the spray drying of Pol6 cellulases. The presence of 1% PEG allowed the best recovery but had a negative effect on enzyme stability while 1% Maltodextrin showed a negative effect on enzyme recovery but a very positive effect on enzyme stabilization.     

Stability and activity of a thermostable malic enzyme in denaturants and water-miscible organic solvents

A study was made of the effects of common protein denaturants and water-miscible organic solvents on both the stability and activity of the malic enzyme [(S)-malate:NADP+ oxidoreductase (oxaloacetate-decarboxylating); EC 1.1.1.40] from the extreme thermoacidophilic archaebacterium Sulfolobus solfataricus. At 25 degrees C, the enzyme was not inactivated in 4 M urea or 0.05% SDS over 24 h, while the half-life was 30 min in 6 M guanidine hydrochloride and 5 h in 0.075% SDS. The enzyme stability in water-miscible organic solvents at 25 degrees C is somewhat surprising: after a 24-h incubation, the enzyme was completely active in 50% dimethylformamide; it lost 15% of its initial activity in 50% methanol or 15% ethanol. However, the resistance to organic solvents was greatly reduced at higher temperatures. The enzyme was able to catalyze the malate conversion even in the presence of 1.5% Triton X-100 or sodium deoxycholate. A number of solvents were found to stimulate the malic activity independent of time. Studies with 50% methanol revealed that the activation was reversible and inversely related to the temperature; moreover, the solvent was demonstrated to exclusively affect the maximal velocity of catalysis, the Km values for both substrates being unchanged. Investigation was made to find out whether there was a correlation between enzyme stability, as well as activation, and hydrophobicity of the organic medium. The residual malic activity after incubation in the water/organic medium correlated inversely with the logarithm of the partition coefficient in octanol/H2O of the mixture used as a hydrophobicity index. On the other hand, the extent of activation depended directly on the logarithm of the molar concentration of the organic solvent required for maximal enzymatic activation. Because of its remarkable resistance to organic solvents required for maximal enzymatic activation. Because of its remarkable resistance to organic solvents and protein denaturants in general, the malic enzyme from Sulfolobus solfataricus can be considered suitable for biotechnological applications.     

Immobilization of goat brain aminopeptidase B in calcium alginate beads

Aminopeptidase B, an arginyl aminopeptidase, was purified from goat brain with a purification factor of ～280 and a yield of 2.7%. It was entrapped in calcium alginate together with bovine serum albumin. The optimal conditions for immobilization for maximum activity yield were 1% CaCl₂ and 2.5% alginate. The immobilized enzyme retained ～62% of its initial activity and could be used for five successive batch reactions with retention of 30% of the initial activity. The pH and temperature optima of the free and immobilized enzyme were pH 7.4, 45°C and pH 7.8, 50°C respectively, while the pH and thermal stability as well as the stability of the enzyme in organic solvents were improved significantly after entrapment. The K_m value for the immobilized enzyme was about twofold higher than that of the soluble enzyme. Because of this increased stability, the immobilized enzyme may be useful in the meat processing industry.     

Comparative study of stability of soluble and cell wall invertase from Saccharomyces cerevisiae

Yeast Saccharomyces cerevisiae is the most significant source of enzyme invertase. It is mainly used in the food industry as a soluble or immobilized enzyme. The greatest amount of invertase is located in the periplasmic space in yeast. In this work, it was isolated into two forms of enzyme from yeast S. cerevisiae cell, soluble and cell wall invertase (CWI). Both forms of enzyme showed same temperature optimum (60°C), similar pH optimum, and kinetic parameters. The significant difference between these biocatalysts was observed in their thermal stability, stability in urea and methanol solution. At 60°C, CWI had 1.7 times longer half-life than soluble enzyme, while at 70°C CWI showed 8.7 times longer half-life than soluble enzyme. After 2-hr of incubation in 8?M urea solution, soluble invertase and CWI retained 10 and 60% of its initial activity, respectively. During 22?hr of incubation of both enzymes in 30 and 40% methanol, soluble invertase was completely inactivated, while CWI changed its activity within the experimental error. Therefore, soluble invertase and CWI have not shown any substantial difference, but CWI showed better thermal stability and stability in some of the typical protein-denaturing agents.     

Cellulose fiber-enzyme composites fabricated through layer-by-layer nanoassembly

Cellulose microfibers were coated with enzymes, laccase and urease, through layer-by-layer assembly by alternate adsorption with oppositely charged polycations. The formation of organized polyelectrolyte and enzyme multilayer films of 15-20 nm thickness was demonstrated by quartz crystal microbalance, zeta-potential analysis, and confocal laser scanning microscopy. These biocomposites retained enzymatic catalytic activity, which was proportional to the number of coated enzyme layers. For laccase-fiber composites, around 50% of its initial activity was retained after 2 weeks of storage at 4 degrees C. The synthesis of calcium carbonate microparticles on urease-fiber composites confirmed urease functionality and demonstrated its possible applications. This strategy could be employed to fabricate fiber-based composites with novel biological functions.     

Understanding structure-stability relationships of Candida antartica lipase B in ionic liquids

Two different water-immiscible ionic liquids (ILs), 1-ethyl-3-methylimidizolium bis(trifluoromethylsulfonyl)imide and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide, were used for butyl butyrate synthesis from vinyl butyrate catalyzed by Candida antarctica lipase B (CALB) at 2% (v/v) water content and 50 degrees C. Both the synthetic activity and stability of the enzyme in these ILs were enhanced as compared to those in hexane. Circular dichroism and intrinsic fluorescence spectroscopic techniques have been used over a period of 4 days to determine structural changes in the enzyme associated with differences in its stability for each assayed medium. CALB showed a loss in residual activity higher than 75% after 4 days of incubation in both water and hexane media at 50 degrees C, being related to great changes in both alpha-helix and beta-strand secondary structures. The stabilization of CALB, which was observed in the two ILs studied, was associated with both the maintenance of the 50% of initial alpha-helix content and the enhancement of beta-strands. Furthermore, intrinsic fluorescence studies clearly showed how a classical enzyme unfolding was occurring with time in both water and hexane media. However, the structural changes associated with the incubation of the enzyme in both ILs might be attributed to a compact and active enzyme conformation, resulting in an enhancement of the stability in these nonaqueous environments.     

Development of acetylcholinesterase silica sol-gel immobilized biosensor--an application towards oxydemeton methyl detection

An amperometric silica sol-gel film immobilized biosensor doped with acetylcholinesterase was fabricated in the laboratory finding application in organophosphate detection based on enzyme inhibition. The substrate used was acetylthiocholine chloride and thiocholine released from the enzymatic hydrolysis was electrochemically oxidized giving larger anodic current at 0.5-0.6 V (versus Ag/AgCl reference). The dependencies of the current response on pH, enzyme loading and thermal stability of the developed biosensor were evaluated. The analytical performance of enzyme electrode towards substrate and inhibitor was investigated. Oxydemeton methyl was taken as a model compound for the inhibition studies. Linear calibration for oxydemeton methyl was obtained in the range of 2-200 ppb under the optimized conditions following an incubation time of 20 min. Treatment of the inhibited enzyme with pyridine-2-aldehyde restored 92% of its original activity. The sensor stored at -20 degrees C had a good storage and operational stability retaining 85% of its original activity for 60 successive measurements.     

Glycation improves the thermostability of trypsin and chymotrypsin

A novel glycation procedure, in vacuo glycation, was used to attach glucose covalently to the lysine residues of trypsin and chymotrypsin. Glycated trypsin and glycated chymotrypsin have greatly increased thermostability compared to the native enzymes. For example, glycated bovine trypsin, incubated at 50 degrees C and pH 8.0 for 3 h, retained more than 50% of its original activity whereas the native enzyme was inactivated under the same conditions. Similarly, after incubation at 50 degrees C and pH 8.0, glycated bovine chymotrypsin retained 45% of its original activity and the native enzyme was inactivated. Glycated porcine trypsin is exceptionally thermostable and could be used to digest native ribonuclease at 70 degrees C without the need for prior denaturation. The apparent increase in the thermal stability of the glycated proteins observed in activity measurements is also reflected by an increase in the T(m) values determined with differential scanning calorimetry (DSC) and circular dichroism (CD). The glycation does not alter the activity or specificity of these enzymes.