Depolymerization of actin filaments by profilin. Effects of profilin on capping protein function

Profilin interacts with the barbed ends of actin filaments and is thought to facilitate in vivo actin polymerization. This conclusion is based primarily on in vitro kinetic experiments using relatively low concentrations of profilin (1-5 microm). However, the cell contains actin regulatory proteins with multiple profilin binding sites that potentially can attract millimolar concentrations of profilin to areas requiring rapid actin filament turnover. We have studied the effects of higher concentrations of profilin (10-100 microm) on actin monomer kinetics at the barbed end. Prior work indicated that profilin might augment actin filament depolymerization in this range of profilin concentration. At barbed-end saturating concentrations (final concentration, approximately 40 microm), profilin accelerated the off-rate of actin monomers by a factor of four to six. Comparable concentrations of latrunculin had no detectable effect on the depolymerization rate, indicating that profilin-mediated acceleration was independent of monomer sequestration. Furthermore, we have found that high concentrations of profilin can successfully compete with CapG for the barbed end and uncap actin filaments, and a simple equilibrium model of competitive binding could explain these effects. In contrast, neither gelsolin nor CapZ could be dissociated from actin filaments under the same conditions. These differences in the ability of profilin to dissociate capping proteins may explain earlier in vivo data showing selective depolymerization of actin filaments after microinjection of profilin. The finding that profilin can uncap actin filaments was not previously appreciated, and this newly discovered function may have important implications for filament elongation as well as depolymerization.     

Interactions among serum vitamin D binding protein, monomeric actin, profilin, and profilactin

Human serum vitamin D binding protein (hDBP), a 58-kDa inter-alpha-globulin, is known to bind, monomeric actin (G-actin) in equimolar quantities. Using monoclonal and polyclonal anti-hDBP antibodies, hDBP, and radioiodinated actin, we developed a reliable saturation assay for actin bound to hDBP. By utilizing this assay, kinetic analysis, and ultracentrifugal sedimentation in sucrose gradients, these proteins' binding affinities (Kd = 10(-9) M) were demonstrated to be 10- to 100-fold greater than earlier estimates. At 4 degrees C, hDBP has an association rate constant of 2.2 x 10(4) M-1 s-1 and a rate of dissociation displaying a t1/2 of 22 h. This high affinity binding was largely unaffected by conditions favoring actin filament formation (1 mM MgCl2 and/or 50 mM KCl), by the range of pH from 6.8 to 8.6 or by temperatures from 4 to 37 degrees C. Compared with ATP-alpha-actin, a 2-fold decrease of binding affinity was observed for the nonmuscle isoactins (beta,gamma), ADP-G-alpha-actin, and N'-ethylmaleimide-modified G-alpha-actin. The 25-hydroxyvitamin D3 and 1 alpha,25-dihydroxyvitamin D3 holo-sterol forms of hDBP bound actin in a manner indistinguishable from the apo-sterol hDBP. The common polymorphisms of hDBP (DBP1 slow, DBP1 fast, and DBP2) were shown to have an equal avidity for G-actin binding. Human platelet profilin competed with hDBP for binding to G-actin, but was 1000-fold less potent (Ki = 1.9 microM). When platelet profilactin was incubated with hDBP, profilin was liberated and hDBP-actin complexes formed. DNase I, which forms a triprotein complex with hDBP-G actin, did not alter the affinity of binding of actin by hDBP. The very high affinity binding observed, which was largely unaffected by the state of G-actin, pH, and ionic conditions, appears to support a constitutive role for plasma DBP in the sequestration of actin monomers, as well as actin from actin-profilin complexes, that are liberated during cell injury.     

Caldesmon-induced polymerization of actin from profilactin

We have investigated the effect of caldesmon, a Ca2+/calmodulin-regulated actin-binding protein, on the complex between profilin and G-actin (profilactin). We found that smooth muscle caldesmon dissociates this complex rapidly and induces the polymerization of the released actin. Native profilactin (e.g. the complex isolated from calf thymus) proved more resistant to the attack of caldesmon than a heterologous complex reconstituted from calf thymus profilin and skeletal muscle actin. The mode of caldesmon-induced profilactin dissociation was similar to that described for Mg2+, and 2 mM MgCl2 potentiated the caldesmon effect. Since both caldesmon and profilin have been found enriched in ruffling membranes of animal cells, our in vitro findings may be relevant to the regulation of actin filaments in living cells.     

alpha-Actinin promotes polymerization of actin from profilactin

The effect of alpha-actinin on profilactin has been analyzed. The results show that addition of submolar ratios of alpha-actinin to a profilactin sample leads to a dissociation by the profilin-actin complex and polymerization of actin. The newly formed filaments are cross-linked by alpha-actinin.     

Fluorescent actin analogs with a high affinity for profilin in vitro exhibit an enhanced gradient of assembly in living cells

Constitutive centripetal transport of the actin-based cytoskeleton has been detected in cells spreading on a substrate, locomoting fibroblasts and keratocytes, and non-locomoting serum-deprived fibroblasts. These results suggest a gradient of actin assembly, highest in the cortex at the cytoplasm-membrane interface and lowest in the non-cortical perinuclear cytoplasm. We predicted that such a gradient would be maintained in part by phosphoinositide-regulated actin binding proteins because the intracellular free Ca2+ and pH are low and spatially constant in serum-deprived cells. The cytoplasm-membrane interface presents one surface where the assembly of actin is differentially regulated relative to the non-cortical cytoplasm. Several models, based on in vitro biochemistry, propose that phosphoinositide-regulated actin binding proteins are involved in local actin assembly. To test these models in living cells using imaging techniques, we prepared a new fluorescent analog of actin that bound profilin, a protein that interacts with phosphoinositides and actin-monomers in a mutually exclusive manner, with an order of magnitude greater affinity (Kd = 3.6 microM) than cys-374-labeled actin (Kd > 30 microM), yet retained the ability to inhibit DNase I. Hence, we were able to directly compare the distribution and activity of a biochemical mutant of actin with an analog possessing closer to wild-type activity. Three-dimensional fluorescence microscopy of the fluorescent analog of actin with a high affinity for profilin revealed that it incorporated into cortical cytoplasmic fibers and was also distributed diffusely in the non- cortical cytoplasm consistent with a bias of actin assembly near the surface of the cell. Fluorescence ratio imaging revealed that serum- deprived and migrating fibroblasts concentrated the new actin analog into fibers up to four-fold in the periphery and leading edge of these cells, respectively, relative to a soluble fluorescent dextran volume marker, consistent with the formation of a gradient of actin filament density relative to cell volume. Comparison of these gradients in the same living cell using analogs of actin with high and low affinities for profilin demonstrated that increased profilin binding enhanced the gradient. Profilin and related proteins may therefore function in part to bias the assembly of actin at the membrane-cytoplasm interface.     

Effects of macrophage profilin on actin in the presence and absence of acumentin and gelsolin

We purified profilin from rabbit alveolar macrophages and documented its structural and functional similarity to profilins isolated from other cells. The KD for formation of the macrophage profilin-actin complex was 3.0 +/- 0.8 microM (mean +/- S.D.). The affinity of this protein for actin did not change significantly in the presence of various concentrations of KCl and MgCl2, profilin-actin complex concentration being strictly dependent on the critical actin monomer concentration and free profilin concentration. We also examined profilin's interactions with actin in the presence of acumentin, a macrophage protein which inhibits actin monomer exchange at the "pointed" ends of actin filaments. Low concentrations of this protein caused substantial decreases in estimated profilin-actin complex concentration. The macrophage gelsolincalcium ion complex which blocks exchange at the "barbed" end of actin filaments, when added to profilin and actin solutions in substoichiometric concentrations, caused large increases in estimated profilin-actin complex concentration. The changes in calculated profilin-actin complex concentration induced by these two actin-modulating proteins were too large to be explained solely by their effects on critical actin monomer concentration.     

The open nucleotide pocket of the profilin/actin x-ray structure is unstable and closes in the absence of profilin

The open nucleotide pocket conformation of actin in the profilin:actinCaATP x-ray structure has been hypothesized to be a crucial intermediate for nucleotide exchange in the actin depolymerization/polymerization cycle. The requirement for ancillary modification of actin for crystallization leads to ambiguities in this interpretation, however. We have used molecular dynamics simulations to model the thermodynamic properties of the actin x-ray structure, outside the crystal lattice, in an aqueous environment with profilin removed. Our simulations show that the open-nucleotide-pocket, profilin-free structure is actually unstable, and closes. The coordination of actin to the nucleotide in the molecular-dynamics-derived closed structure is virtually identical to that in the closed profilin:actinSrATP x-ray structure. Thus, there is currently no thermodynamically stable structure representing the open-nucleotide-pocket state of actin.     

Time-resolved X-ray scattering study of actin polymerization from profilactin

The polymerization of actin in solutions of purified calf spleen actin or profilactin (1–10 mg·ml^-1) was followed by synchrotron radiation X-ray solution scattering. At the concentration used, polymerization of actin from profilactin or actin occurs without any lag phase. It is shown by a combination of solution scattering, model calculations and electron microscopy that contrary to the conclusions from previous viscometry studies, filaments form without any lag phase in profilactin solution but aggregate in bundles or networks. This phenomenon is independent of the method used to induce polymerization: slow temperature increase, temperature jump in the presence of polymerizing salts or fast mixing with salt. This aggregation explains the lower final viscosity levels, as compared to actin solutions, observed during the polymerization of actin from profilactin.     

Acanthamoeba actin and profilin can be cross-linked between glutamic acid 364 of actin and lysine 115 of profilin

Acanthamoeba profilin was cross-linked to actin via a zero-length isopeptide bond using carbodiimide. The covalently linked 1:1 complex was purified and treated with cyanogen bromide. This cleaves actin into small cyanogen bromide (CNBr) peptides and leaves the profilin intact owing to its lack of methionine. Profilin with one covalently attached actin CNBr peptide was purified by gel filtration followed by gel electrophoresis and electroblotting on polybase-coated glass-fiber membranes. Since the NH2 terminus of profilin is blocked, Edman degradation gave only the sequence of the conjugated actin CNBr fragment beginning with Trp-356. The profilin-actin CNBr peptide conjugate was digested further with trypsin and the cross-linked peptide identified by comparison with the tryptic peptide pattern obtained from carbodiimide-treated profilin. Amino-acid sequence analysis of the cross-linked tryptic peptides produced two residues at each cycle. Their order corresponds to actin starting at Trp-356 and profilin starting at Ala-94. From the absence of the phenylthiohydantoin-amino acid residues in specific cycles, we conclude that actin Glu-364 is linked to Lys-115 in profilin. Experiments with the isoforms of profilin I and profilin II gave identical results. The cross-linked region in profilin is homologous with sequences in the larger actin filament capping proteins fragmin and gelsolin.     

The use of poly(L-proline)-Sepharose in the isolation of profilin and profilactin complexes

In the purification of proline hydroxylase by affinity chromatography on poly(L-proline)-Sepharose it was found earlier that two other components, profilin and the complex profilin-actin, also bind with high affinity to this matrix. We have exploited this observation to develop a rapid procedure for the isolation of profilin and profilin-actin complexes in high yields directly from high-speed supernatants of crude tissue-extracts. Through an extensive search for elution conditions, avoiding poly(L-proline) as the desorbant, we have found that active proteins can be recovered from the affinity column with a buffer containing 30% dimethyl sulphoxide. Subsequent chromatography on hydroxylapatite separates free profilin and the two isoforms of profilactin, profilin-actin beta and profilin-actin gamma. The profilin-actin complexes produced this way have high specific activities in the DNAase-inhibition assay, give rise to filaments on addition of Mg2+, and can be crystallized. From the isolated profilin-actin complexes the beta- and gamma-actin isoforms of non-muscle cells can easily be prepared in a polymerization competent form. Pure profilin is either obtained from an excess pool present in some extracts or by dissociation of profilin-actin complexes and removal of the actin.     

Analysis of the function of Spire in actin assembly and its synergy with formin and profilin

The Spire protein, together with the formin Cappuccino and profilin, plays an important role in actin-based processes that establish oocyte polarity. Spire contains a cluster of four actin-binding WH2 domains. It has been shown to nucleate actin filaments and was proposed to remain bound to their pointed ends. Here we show that the multifunctional character of the WH2 domains allows Spire to sequester four G-actin subunits binding cooperatively in a tight SA(4) complex and to nucleate, sever, and cap filaments at their barbed ends. Binding of Spire to barbed ends does not affect the thermodynamics of actin assembly at barbed ends but blocks barbed end growth from profilin-actin. The resulting Spire-induced increase in profilin-actin concentration enhances processive filament assembly by formin. The synergy between Spire and formin is reconstituted in an in vitro motility assay, which provides a functional basis for the genetic interplay between Spire, formin, and profilin in oogenesis.     

Stoichiometry of Nck-dependent actin polymerization in living cells

Regulation of actin dynamics through the Nck/N-WASp (neural Wiskott-Aldrich syndrome protein)/Arp2/3 pathway is essential for organogenesis, cell invasiveness, and pathogen infection. Although many of the proteins involved in this pathway are known, the detailed mechanism by which it functions remains undetermined. To examine the signaling mechanism, we used a two-pronged strategy involving computational modeling and quantitative experimentation. We developed predictions for Nck-dependent actin polymerization using the Virtual Cell software system. In addition, we used antibody-induced aggregation of membrane-targeted Nck SH3 domains to test these predictions and to determine how the number of molecules in Nck aggregates and the density of aggregates affected localized actin polymerization in living cells. Our results indicate that the density of Nck molecules in aggregates is a critical determinant of actin polymerization. Furthermore, results from both computational simulations and experimentation support a model in which the Nck/N-WASp/Arp2/3 stoichiometry is 4:2:1. These results provide new insight into activities involving localized actin polymerization, including tumor cell invasion, microbial pathogenesis, and T cell activation.     

Regulation of the actin cytoskeleton in living cells

The dynamic behavior of pure actin in vitro is more complex than that of most simple polymers, due to the energy input from the irreversible nucleotide hydrolysis associated with polymerization. However, the dynamic behavior of actin is vastly more complicated inside cells, where dozens of different types of actin-binding proteins alter every rate constant for actin polymerization and the chemical environment is inhomogeneous both temporally and spatially. Actin dynamics in cells are tightly regulated, so that rapid filament polymerization can occur in response to external signals or at the front of an active lamellipodium, while rapid depolymerization occurs simultaneously elsewhere in the cell. Although more direct observations of actin dynamics in vivo are accumulating, it is not yet clear how to reconcile the behavior of actin in cells with its well-documented in vitro properties.     

Poly(L-proline)-binding proteins from chick embryos are a profilin and a profilactin

Two poly(L-proline)-binding proteins (PBP-1 and PBP-2) were purified from chick embryos by using a poly(L-proline)-agarose column. PBP-1 was composed of two different polypeptides (molecular masses of 42 kDa and 15 kDa). The molar ratio of the two proteins in the complex was 1:1. The other poly(L-proline)-binding protein, PBP-2, was the 15-kDa protein itself. The 42-kDa protein was confirmed to be an actin from the amino acid composition, by immunochemical evidence and by its ability to self-polymerize. In addition, the 42 + 15-kDa protein complex (PBP-1) inhibited DNase I, just as a monomeric actin did. The amino acid composition of the 15-kDa protein was similar to that of mammalian profilin and it inhibited the salt-induced polymerization of rabbit skeletal muscle actin. Therefore, we conclude that the two poly(L-proline)-binding proteins from the chick embryo are a profilactin and a profilin in chick embryo. The ability of profilactin to bind poly(L-proline) must be due to profilin itself, because the profilin has a greater affinity for poly(L-proline) than does profilactin. Additionally, both the monomeric and filamentous actin from rabbit skeletal muscle have no affinity for poly(L-proline).     

Impact of profilin on actin-bound nucleotide exchange and actin polymerization dynamics

We have investigated the effects of profilin on nucleotide binding to actin and on steady state actin polymerization. The rate constants for the dissociation of ATP and ADP from monomeric Mg-actin at physiological conditions are 0.003 and 0.009 s-1, respectively. Profilin increases these dissociation rate constants to 0.08 s-1 for MgATP-actin and 1.4 s-1 for MgADP-actin. Thus, profilin can increase the rate of exchange of actin-bound ADP for ATP by 140-fold. The affinity of profilin for monomeric actin is found to be similar for MgATP-actin and MgADP-actin. Continuous sonication was used to allow study of solutions having sustained high filament end concentrations. During sonication at steady state, F-actin depolymerizes toward the critical concentration of ADP-actin [Pantaloni, D., et al. (1984)J. Biol. Chem. 259, 6274-6283], our analysis indicates that under these conditions a significant number of filaments contain terminal ADP-actin subunits. Addition of profilin to this system increases the polymer concentration and increases the steady state ATPase activity during sonication. These data are explained by the fast exchange of ATP for ADP on the profilin-ADP-actin complex, resulting in rapid ATP-actin regeneration. An important function of profilin may be to provide the growing ends of filaments with ATP-actin during periods when the monomer cycling rate exceeds the intrinsic nucleotide exchange rate of monomeric actin.     

The profilin:actin complex localizes to sites of dynamic actin polymerization at the leading edge of migrating cells and pathogen-induced actin tails

A unique set of affinity-purified anti-profilin and anti-actin antibodies generated against a covalently coupled version of the profilin:actin complex was used to assess the distribution of profilin and non-filamentous actin in mouse melanoma cells. In agreement with the profilin:actin complex being the principal source of actin for filament formation, we observed extensive co-distribution of both antibody preparations with vasodilator-stimulated phosphoprotein (VASP) and the p34 subunit of the Arp2/3 complex, both of which are components of actin polymer-forming protein complexes in the cell. This suggests that the localization of profilin and actin revealed with these antibodies in fact reflects the distribution of the profilin:actin complex rather than the two proteins separately. Significantly, protruding lamellipodia and filopodia showed intensive labeling. The two antibody preparations were also used to stain HeLa cells infected with Listeria monocytogenes or vaccinia virus. In both cases, the pattern of antibody staining of the pathogen-induced microfilament arrangement differed, suggesting a varying accessibility for the antibody-binding epitopes.     

Dynamic motion of paxillin on actin filaments in living endothelial cells

Our three-dimensional (3-D) images showed that paxillin co-localized on actin filaments as fibrous structures, as well as clusters, in endothelial cells (ECs). In living ECs under flow condition, we monitored concurrently the intracellular dynamics of DsRed2-paxillin and GFP-actin by time-lapse video recording and dual-color fluorescence imaging. The results showed that the dynamic motion of paxillin as fibrous structures was associated with actin filaments, but not with microtubules. Our findings suggest that the actin network plays an important role not only in the assembly/disassembly of paxillin at focal adhesions, but also as a track for the intracellular transport of paxillin, which is involved in signaling pathway.     

Mechanical properties of actin stress fibers in living cells

Actin stress fibers (SFs) play an important role in many cellular functions, including morphological stability, adhesion, and motility. Because of their central role in force transmission, it is important to characterize the mechanical properties of SFs. However, most of the existing studies focus on properties of whole cells or of actin filaments isolated outside cells. In this study, we explored the mechanical properties of individual SFs in living endothelial cells by nanoindentation using an atomic force microscope. Our results demonstrate the pivotal role of SF actomyosin contractile level on mechanical properties. In the same SF, decreasing contractile level with 10 μM blebbistatin decreased stiffness, whereas increasing contractile level with 2 nM calyculin A increased stiffness. Incrementally stretching and indenting SFs made it possible to determine stiffness as a function of strain level and demonstrated that SFs have nearly linear stress-stain properties in the baseline state but nonlinear properties at a lower contractile level. The stiffnesses of peripheral and central portions of the same SF, which were nearly the same in the baseline state, became markedly different after contractile level was increased with calyculin A. Because these results pertain to effects of interventions in the same SF in a living cell, they provide important new understanding about cell mechanics.     

Molecular packing in profilin: actin crystals and its implications

Analysis of profilin: actin crystals reveals an extensive intermolecular network, rather than a discrete "monomeric complex", comprising stacked actin ribbons held in place by columns of profilin molecules, wedged in between neighboring actin subunits and running perpendicular to the ribbons. Comparison with data from electron microscopy, X-ray diffraction, spectroscopy, and biochemistry of actin suggests that a simple transformation relates the ribbon to f-actin. The crystals exhibit unusual polymorphic properties, which strengthens the view that movements within the actin monomer are important for force generation.