Growth and palmitoleic acid accumulation of filamentous oleaginous microalgae <Emphasis Type="Italic">Tribonema minus</Emphasis> at varying temperatures and light regimes

Palmitoleic acid (C16:1Δ9), contributes greatly to human health, industrial chemicals and biodiesel. The filamentous oleaginous microalgae Tribonema sp. has been identified as a highly efficient producer of palmitoleic acid. Temperature and light regime were adapted to regulate the palmitoleic acid content in this study. Strain T. minus was able to grow well at all the tested temperatures, even at 5 °C. The optimum temperature for palmitoleic acid accumulation (54.25 % of total fatty acid) was 25 °C. Moreover, both light intensity and photoperiod affect the growth, lipid content and fatty acid files of T. minus. The culture exposed to 240 μmol photons m^?2 s^?1 with a photoperiod of 24:0 showed the highest biomass (6.87 g L^?1) and biggest lipid content (61.27 % of dry weight), whereas the most amount of palmitoleic acid (50.47 % of total fatty acid) was detected at 120 μmol photons m^?2 s^?1. These findings make tangible contributions to culture T. minus for commercial production of lipid or palmitoleic acid.     

Lipid productivity and fatty acid composition-guided selection of Chlorella strains isolated from Malaysia for biodiesel production

The need to develop biomass-based domestic production of high-energy liquid fuels (biodiesel) for transportation can potentially be addressed by exploring microalgae with high lipid content. Selecting the strains with adequate oil yield and quality is of fundamental importance for a cost-efficient biofuel feedstock production based on microalgae. This work evaluated 29 strains of Chlorella isolated from Malaysia as feedstock for biodiesel based on volumetric lipid productivity and fatty acid profiles. Phylogenetic studies based on 18S rRNA gene revealed that majority of the strains belong to true Chlorella followed by Parachlorella. The strains were similarly separated into two groups based on fatty acid composition. Of the 18 true Chlorella strains, Chlorella UMACC187 had the highest palmitic acid (C16:0) content (71.3?±?4.2 % total fatty acids, TFA) followed by UMACC84 (70.1?±?0.7 %TFA), UMACC283 (63.8?±?0.7 %TFA), and UMACC001 (60.3?±?4.0 %TFA). Lipid productivity of the strains at exponential phase ranged from 34.53 to 230.38 mg L^?1 day^?1, with Chlorella UMACC050 attaining the highest lipid productivity. This study demonstrated that Chlorella UMACC050 is a promising candidate for biodiesel feedstock production.     

Effects of nitrogen supplementation of the culture medium on the growth, total lipid content and fatty acid profiles of three microalgae (Tetraselmis subcordiformis, Nannochloropsis oculata and Pavlova viridis)

To improve the properties of microalgae as sources for biodiesel production, three microalgae (Tetraselmis subcordiformis SHOU-S05, Nannochloropsis oculata SHOU-S14 and Pavlova viridis SHOU-S16) were cultured in media supplemented with different amounts of nitrogen (0, 0.22, 0.44, 0.88 and 1.76 mmol N·L^?1). The growth, total lipid contents, lipid classes and fatty acid profiles of the three microalgae were assayed after 10 days of cultivation. The results indicated that the specific growth rates of T. subcordiformis, N. oculata and P. viridis were lowest (0.014, 0.033 and 0.018, respectively) in the treatments without nitrogen supplementation and increased significantly with increasing nitrogen supplementation. The microalgae treated with 0.22 mmol N·L^?1 had the highest total lipid contents, which were 29.77, 35.85 and 32.10 % in T. subcordiformis, N. oculata and P. viridis, respectively. The total lipid contents as well as the proportions of neutral lipid in the three microalgae decreased significantly with increasing nitrogen supplementation between 0.22 and 1.76 mmol N·L^?1. The fatty acid profiles of the three microalgae were significantly different. The obvious characteristic of the fatty acid profile of T. subcordiformis was a high amount (17.68–22.22 %) of 18:3n3. However, EPA (C20:5n3) and C16 fatty acids were significantly high in N. oculata and P. viridis, respectively. N. oculata and P. viridis accumulated more 16-carbon fatty acids and fewer polyunsaturated fatty acids in nitrogen-limited media. It is therefore suggested that a limited nitrogen treatment is effective for improving the properties of P. viridis and N. oculata as sources for biodiesel.     

Screening Microalgae Strains for Biodiesel Production: Lipid Productivity and Estimation of Fuel Quality Based on Fatty Acids Profiles as Selective Criteria

The viability of algae-based biodiesel industry depends on the selection of adequate strains in regard to profitable yields and oil quality. This work aimed to bioprospecting and screening 12 microalgae strains by applying, as selective criteria, the volumetric lipid productivity and the fatty acid profiles, used for estimating the biodiesel fuel properties. Volumetric lipid productivity varied among strains from 22.61 to 204.91 mg l^?1 day^?1. The highest lipid yields were observed for Chlorella (204.91 mg l^?1 day¹) and Botryococcus strains (112.43 and 98.00 mg l^?1 day^?1 for Botryococcus braunii and Botryococcus terribilis, respectively). Cluster and principal components analysis analysis applied to fatty acid methyl esters (FAME) profiles discriminated three different microalgae groups according to their potential for biodiesel production. Kirchneriella lunaris, Ankistrodesmus fusiformis, Chlamydocapsa bacillus, and Ankistrodesmus falcatus showed the highest levels of polyunsaturated FAME, which incurs in the production of biodiesels with the lowest (42.47–50.52) cetane number (CN), the highest (101.33–136.97) iodine values (IV), and the lowest oxidation stability. The higher levels of saturated FAME in the oils of Chlamydomonas sp. and Scenedesmus obliquus indicated them as source of biodiesel with higher oxidation stability, higher CN (63.63–64.94), and lower IV (27.34–35.28). The third group, except for the Trebouxyophyceae strains that appeared in isolation, are composed by microalgae that generate biodiesel of intermediate values for CN, IV, and oxidation stability, related to their levels of saturated and monosaturated lipids. Thus, in this research, FAME profiling suggested that the best approach for generating a microalgae-biodiesel of top quality is by mixing the oils of distinct cell cultures.     

Isolation and screening of euryhaline <Emphasis Type="Italic">Tetraselmis</Emphasis> spp. suitable for large-scale outdoor culture in hypersaline media for biofuels

Natural saline lakes in Western Australia were sampled for microalgae species and strains with potential for large-scale outdoor cultivation over a wide range of salinities for biofuels production. Using a rational isolation and screening process, several Tetraselmis strains (Chlorophyta, Chlorodendrales) with a broad range of salinity tolerance were identified and were characterised further for their potential for biofuels production. Specific growth rates increased from 0.8 to 1.2 days^?1 when the medium salinity was decreased from 11 to 3 % (w/v) NaCl (1.88 to 0.51 M NaCl) in batch cultivation mode, thereby indicating quick adaptation to large salinity changes. In general, ash-free dry weight (AFDW), total lipid, protein and carbohydrate contents per cell were highest in the early stages of growth. Salinity increases led to an increase in cell AFDW, with the highest mean maximum of 2555?±?659 pg AFDW.cell^?1 at 11 % (w/v) NaCl in the strains Tetraselmis MUR 167 and MUR 219 which had been in culture for many years, as compared to the mean maximum of 981?±?141 pg AFDW.cell^?1 the in newly isolated strains MUR 230, 231, 232 and 233. Similar observations on total lipid, protein and carbohydrate content per cell were made between the two groups of strains. Overall, all strains yielded high biomass and total lipid productivities over a very wide range of salinities without large variation in their gross biochemical composition and growth pattern. Based on AFDW and total lipid productivity data, the order of preference for selecting strains for further investigation for large-scale culture was MUR 231?>?MUR 233?>?MUR 219?>?MUR 230?>?MUR 232?>?MUR 167. The Tetraselmis spp. were also very competitive as shown by the outdoor cultivation of diatom, Halamphora coffeaeformis MUR 158, in parallel with Tetraselmis sp. MUR 167 which resulted in the diatom being outcompeted by the green alga. Our results demonstrate the high commercial potential of euryhaline Tetraselmis spp. for cultivation over a broad range of salinity in outdoor cultures.     

Growing microalgae as aquaculture feeds on twin-layers: a novel solid-state photobioreactor

Four strains of marine microalgae commonly used as live feeds in hatcheries (Isochrysis sp. T.ISO, Tetraselmis suecica, Phaeodactylum tricornutum, Nannochloropsis sp.) were grown in a novel solid-state photobioreactor, the twin-layer system. Microalgae were immobilized by self adhesion to vertically oriented twin-layer modules which consisted of two different types of ultrathin layers, a macroporous source layer (glass fiber nonwoven) through which the culture medium was transported by gravity flow, and a microporous substrate layer (plain printing paper) which carried the algae on both surfaces of the source layer. This simple open cultivation system effectively separated the immobilized microalgae from the bulk of the growth medium and permitted prolonged cultivation of microalgae with average biomass yields of 10–15 g dry weight m^?2 growth area after 14–25 days of cultivation. Algal biomass was harvested as fresh weight (with 72–84 % water content) without the need to pre-concentrate algae. No aeration or external CO₂ supply was necessary, and due to the microporous substrate layer, no eukaryotic contaminations were observed during the experiment. All experiments were conducted in Germany under greenhouse conditions with natural sunlight. Small-scale growth experiments performed under the same conditions revealed that growth over most of the experimental period (24 days) was linear in all tested algae with growth rates (dry weight per square meter growth area) determined to be 0.6 g ?m^?2?day^?1 (Isochrysis), 0.8 g? m^?2?day^?1 (Nannochloropsis), 1.5 g ?m^?2?day^?1 (Tetraselmis), and 1.8 g? m^?2?day^?1 (Phaeodactylum). Due to its cost-effective construction and with further optimisation of design and productivity at technical scales, the twin-layer system may provide an attractive alternative to methods traditionally used to cultivate live microalgae.     

Improving of lipid productivity of the biodiesel promising green microalga <Emphasis Type="Italic">Chlorella pyrenoidosa</Emphasis> via low-energy ion implantation

High lipid content in microalgae is an essential parameter for adopting of microalgal biomass as a feedstock for biodiesel. Mutation is one approach to obtain desired algal strain with high lipid production. In this study, a mutant strain of Chlorella pyrenoidosa was isolated using 1.5?×?10¹⁵ ions cm^?2 s^?1 of N⁺ ion beam implantation technique, which has been widely used in mutagenesis of agricultural crops. N⁺ implantation slightly improved the growth of the mutant over the corresponding wild strain with significant increase in lipid content (32.4 % higher than the wild strain), which resulted in significant increase in lipid productivity by 35 %. In addition, ion implantation mutagenesis of C. pyrenoidosa resulted in 21.4 % decrease in total saturated fatty acids (SFAs) compared to the wild type, with a noticeable increase in polyunsaturated fatty acids (PUFAs). The increase in PUFAs was due mainly to stimulation of hexadecadienoic acid (C16:2) and octadecadienoic acid (C18:2) production. However, the SFA content of wild and mutant strains was 31.7 and 24.9 % of total fatty acids, respectively, highlighting the oxidative stability of biodiesel produced by both strains according to the European standards. Cultivation of C. pyrenoidosa mutant in selenite enrichment medium for five successive cultivation experiments showed insignificant changes in biomass productivity, lipid content, and lipid productivity alongside the study period, which confirms the genetic stability of the produced mutant. The present study confirmed the feasibility of generation of microalgae mutants with significant high lipid production using ion beam implantation.     

Effects of photoperiod,salinity and pH on cell growth and lipid content of Pavlova lutheri

The aim of the present work was to study the effects of photoperiod, salinity and pH on growth and lipid content of Pavlova lutheri microalgae for biodiesel production in small-scale and large-scale open-pond tanks. In a 250-mL flask, the cultures grew well under 24 h illumination with maximum specific growth rate, μ _max , of 0.12 day^?1 and lipid content of 35 % as compared to 0.1 day^?1 and 15 % lipid content in the dark. The salinity was optimum for the cell growth at 30–35 ppt, but the lipid content of 34–36 % was higher at 35–40 ppt. Algal growth and lipid accumulation was optimum at pH 8–9. Large-scale cultivation in 5-L and 30-L tanks achieved μ _max of 0.13–0.14 day^?1 as compared to 0.12 day^?1 in small-scale and 300L cultures.     

Evaluation of antioxidant capacities of green microalgae

Three strains of green microalgae, Chlorococcum sp.C53, Chlorella sp. E53, and Chlorella sp.ED53 were studied for their antioxidant activities. Crude extracts of these microalgae in hot water and in ethanol were examined for their total phenolic contents and for their antioxidant capacities. In order to determine their phenolic contents, the Folin–Ciocalteu method was used. As for the determination of their antioxidant capacities, four different assays were used: (1) total antioxidant capacity determination; (2) DPPH radical scavenging assay; (3) ferrous ion chelating ability assay; and (4) inhibition of lipid peroxidation (using thiobarbituric acid reactive substance). For all the strains we have studied, their ethanolic extract showed more antioxidant activities than their hot water extract. Categorically, the ethanolic extract of Chlorella sp.E53 exhibited both the highest total phenolic content of 35.5?±?0.14 mg gallic acid equivalent (GAE) g^?1 dry weight and the highest DPPH radical scavenging of 68.18?±?0.38 % at 1.4 mg mL^?1 (IC₅₀ 0.81 mg mL^?1), whereas Chlorella sp.ED53 showed both the highest ferrous ion chelation activity of 42.78?±?1.48 % at 1 mg mL^?1 (IC₅₀ 1.23 mg mL^?1) and the highest inhibition of lipid peroxidation of 87.96?±?0.59 % at 4 mg mL^?1. This high level of inhibition is comparable to 94.42?±?1.39 % of butylated hydroxytoluene, a commercial synthetic antioxidant, at the same concentration.     

Statistical evaluation and modeling of cheap substrate-based cultivation medium of Chlorella vulgaris to enhance microalgae lipid as new potential feedstock for biolubricant

Chlorella vulgaris (C. vulgaris) microalga was investigated as a new potential feedstock for the production of biodegradable lubricant. In order to enhance microalgae lipid for biolubricant production, mixotrophic growth of C. vulgaris was optimized using statistical analysis of Plackett–Burman (P-B) and response surface methodology (RSM). A cheap substrate-based medium of molasses and corn steep liquor (CSL) was used instead of expensive mineral salts to reduce the total cost of microalgae production. The effects of molasses and CSL concentration (cheap substrates) and light intensity on the growth of microalgae and their lipid content were analyzed and modeled. Designed models by RSM showed good compatibility with a 95% confidence level when compared to the cultivation system. According to the models, optimal cultivation conditions were obtained with biomass productivity of 0.123 g L^?1 day^?1 and lipid dry weight of 0.64 g L^?1 as 35% of dry weight of C. vulgaris. The extracted microalgae lipid presented useful fatty acid for biolubricant production with viscosities of 42.00 cSt at 40°C and 8.500 cSt at 100°C, viscosity index of 185, flash point of 185°C, and pour point of ?6°C. These properties showed that microalgae lipid could be used as potential feedstock for biolubricant production.     

Lipid productivity and fatty acid composition in Chlorella and Scenepdesmus strains grown in nitrogen-stressed conditions

Thirty Chlorella and 30 Scenedesmus strains grown in nitrogen-stressed conditions (70 mg L^?1 N) were analyzed for biomass accumulation, lipid productivity, protein, and fatty acid (FA) composition. Scenedesmus strains produced more biomass (4.02?±?0.73 g L^?1) after 14 days in culture compared to Chlorella strains (2.57?±?0.12 g L^?1). Protein content decreased and lipid content increased from days 8 to 14 with an increase in triacylglycerol (TAG) accumulation in most strains. By day 14, Scenedesmus strains generally had higher lipid productivity (53.5?±?3.7 mg lipid L^?1 day^?1) than Chlorella strains (35.1?±?2.8 mg lipid L^?1 day^?1) with the lipids consisting mainly of C16–18 TAGs. Scenedesmus strains generally had a more suitable FA profile with higher amounts of saturated fatty acids and monounsaturated fatty acids (MUFAs) and a smaller polyunsaturated fatty acid (PUFA) component. Chlorella strains had a larger PUFA component and smaller MUFA component. The general trend in the FA composition of Chlorella strains was oleic > palmitic > α-linolenic = linoleic > eicosenoic > heptadecenoic > stearic acid. For Scenedesmus strains, the general trend was oleic > palmitic > linoleic > α-linolenic > stearic > eicosenoic > palmitoleic > heptadecenoic acid. The most promising strains with the highest lipid productivity and most suitable FA profiles were Scenedesmus sp. MACC 401, Scenedesmus soli MACC 721, and Scenedesmus ecornis MACC 714. Although Chlorella sp. MACC 519 had lower lipid productivity, the FA profile was good with a lower PUFA component compared to the other Chlorella strains analyzed and a low linolenic acid concentration.     

Evaluation of indigenous microalgal isolate Chlorella sp. FC2 IITG as a cell factory for biodiesel production and scale up in outdoor conditions

The present study reports evaluation of an indigenous microalgal isolate Chlorella sp. FC2 IITG as a potential candidate for biodiesel production. Characterization of the strain was performed under photoautotrophic, heterotrophic, and mixotrophic cultivation conditions. Further, an open-pond cultivation of the strain under outdoor conditions was demonstrated to evaluate growth performance and lipid productivity under fluctuating environmental parameters and in the presence of potential contaminants. The key findings were: (1) the difference in cultivation conditions resulted in significant variation in the biomass productivity (73–114 mg l^?1 day^?1) and total lipid productivity (35.02–50.42 mg l^?1 day^?1) of the strain; (2) nitrate and phosphate starvation were found to be the triggers for lipid accumulation in the cell mass; (3) open-pond cultivation of the strain under outdoor conditions resulted in biomass productivity of 44 mg l^?1 day^?1 and total lipid productivity of 10.7 mg l^?1 day^?1; (4) a maximum detectable bacterial contamination of 7 % of the total number of cells was recorded in an open-pond system; and (5) fatty acid profiling revealed abundance of palmitic acid (C16:0), oleic acid (C18:1) and linoleic acid (C18:2), which are considered to be the key elements for suitable quality biodiesel.     

Long-term outdoor growth and lipid productivity of Tetraselmis suecica, Dunaliella tertiolecta and Chlorella sp (Chlorophyta) in bag photobioreactors

There has been considerable interest on cultivation of green microalgae (Chlorophyta) as a source of lipid that can alternatively be converted to biodiesel. The ideal microalga characteristics are that it must grow well even under high cell density and under varying outdoor environmental conditions and be able to have a high biomass productivity and contain a high oil content (~25–30 %). The main advantage of Chlorophyta is that their fatty acid profile is suitable for biodiesel conversion. Tetraselmis suecica CS-187 and Chlorella sp. were grown semi-continuously in bag photobioreactors (120 L, W?×?L?=?40?×?380 cm) over a period of 11 months in Melbourne, Victoria, Australia. Monthly biomass productivity of T. suecica CS-187 and Chlorella sp. was strongly correlated to available solar irradiance. The total dry weight productivity of T. suecica and Chlorella sp. was 110 and 140 mg L^?1 d^?1, respectively, with minimum 25 % lipid content for both strains. Both strains were able to tolerate a wide range of shear produced by mixing. Operating cultures at lower cell density resulted in increasing specific growth rates of T. suecica and Chlorella sp. but did not affect their overall biomass productivity. On the other hand, self shading sets the upper limit of operational maximum cell density. Several attempts in cultivating Dunaliella tertiolecta CS-175 under the same climatic conditions were unsuccessful.     

Optimization of cultivation conditions for fatty acid composition and EPA production in the eustigmatophycean microalga Trachydiscus minutus

We determined the effects of cultivation conditions (nitrogen source, salinity, light intensity, temperature) on the composition of polyunsaturated fatty acids (PUFAs) and the production of eicosapentaenoic acid (EPA) in the laboratory cultured eustigmatophycean microalga, Trachydiscus minutus. T. minutus was capable of utilizing all nitrogen compounds tested (potassium nitrate, urea, ammonium nitrate, ammonium carbonate) with no differences in growth and only minor differences in fatty acid (FA) compositions. Ammonium carbonate was the least appropriate for lipid content and EPA production, while urea was as suitable as nitrates. Salinity (0.2 % NaCl) slightly stimulated EPA content and inhibited growth. Increasing salinity had a marked inhibitory effect on growth and PUFA composition; salinity at or above 0.8 % NaCl was lethal. Both light intensity and temperature had a distinct effect on growth and FA composition. The microalga grew best at light intensities of 470–1,070 μmol photons m^?2 s^?1 compared to 100 μmol photons m^?2 s^?1, and at 28 °C; sub-optimal temperatures (20, 33 °C) strongly inhibited growth. Saturated fatty acids increased with light intensity and temperature, whereas the reverse trend was found for PUFAs. Although the highest level of EPA (as a proportion of total FAs) was achieved at a light intensity of 100 μmol photons m^?2 s^?1 (51.1?± 2.8 %) and a temperature of 20 °C (50.9?±?0.8 %), the highest EPA productivity of about 30 mg L^?1?day^?1 was found in microalgae grown at higher light intensities, at 28 °C. Overall, for overproduction of EPA in microalgae, we propose that outdoor cultivation be used under conditions of a temperate climatic zone in summer, using urea as a nitrogen source.     

Comparison of biomass production and total lipid content of freshwater green microalgae cultivated under various culture conditions

The growth and total lipid content of four green microalgae (Chlorella sp., Chlorella vulgaris CCAP211/11B, Botryococcus braunii FC124 and Scenedesmus obliquus R8) were investigated under different culture conditions. Among the various carbon sources tested, glucose produced the largest biomass or microalgae grown heterotrophically. It was found that 1 % (w/v) glucose was actively utilized by Chlorella sp., C. vulgaris CCAP211/11B and B. braunii FC124, whereas S. obliquus R8 preferred 2 % (w/v) glucose. No significant difference in biomass production was noted between heterotrophic and mixotrophic (heterotrophic with light illumination/exposure) growth conditions, however, less production was observed for autotrophic cultivation. Total lipid content in cells increased by approximately two-fold under mixotrophic cultivation with respect to heterotrophic and autotrophic cultivation. In addition, light intensity had an impact on microalgal growth and total lipid content. The highest total lipid content was observed at 100 μmol m^?2s^?1 for Chlorella sp. (22.5 %) and S. obliquus R8 (23.7 %) and 80 μmol m^?2s^?1 for C. vulgaris CCAP211/11B (20.1 %) and B. braunii FC124 (34.9 %).     

The effect of gradual increase in salinity on the biomass productivity and biochemical composition of several marine,halotolerant<Emphasis Type="Bold">,</Emphasis> and halophilic microalgae

Open ponds are the preferred cultivation system for large-scale microalgal biomass production. To be more sustainable, commercial scale biomass production should rely on seawater, as freshwater is a limiting resource, especially in places with high irradiance. If seawater is used for both pond fill and evaporative volume makeup, salinity of the growth media will rise over time. It is not possible for any species to achieve optimum growth over the whole saline spectrum (from seawater salinity level up to salt saturation state). In this study, we investigated the effects of gradual salinity increase (between 35 and 233 ppt) on biomass productivity and biochemical composition (lipid and carbohydrate) of six marine, two halotolerant, and a halophilic microalgae. A gradual and slow stepped salinity increase was found to expand the salinity tolerance range of tested species. A gradual reduction in biomass productivity and maximum photochemical efficiency was observed as a consequence of increased salinity in all tested species. Among the marine microalgae, Tetraselmis showed highest biomass productivity (32 mg L^?1 day^?1) with widest salinity tolerance range (35 to 109 ppt). Halotolerant Amphora and Navicula were able to grow from 35 ppt to 129 ppt salinity. Halophilic Dunaliella was the only species capable of growing between 35 and 233 ppt and showed highest lipid content (56.2%) among all tested species. This study showed that it should be possible to maintain high biomass in open outdoor cultivation utilizing seawater by growing Tetraselmis, Amphora, and Dunaliella one after another as salinity increases in the cultivation system.     

Effect of high ferric ion concentrations on total lipids and lipid characteristics of Tetraselmis subcordiformis,Nannochloropsis oculata and Pavlova viridis

Microalgae as sources for biodiesel production have been widely investigated. Microalgae biomass, lipid content and fatty acid profiles of microalgae are limiting factors for the cost-effective production of biodiesel. In this paper, the effects of high ferric ion concentrations on three species of microalgae (Tetraselmis subcordiformis, Nannochloropsis oculata and Pavlova viridis) were studied. The microalgae were cultured in different concentrations (1.2?×?10^?2, 1.2?×?10^?1, 1.2 and 12 mmol L^?1) of ferric ion. The growth, lipid content and fatty acid profiles of the three microalgae were analysed. When algae were cultured in 1.2 mmol L^?1 ferric ion for 10 days, the final cell density and specific growth rates of T. subcordiformis, N. oculata and P. viridis decreased significantly (p?<?0.05), and the total lipid contents of the microalgae, 33.72, 37.34 and 29.48 % (dry mass) in T. subcordiformis, N. oculata and P. viridis, respectively, were higher than those at other concentrations. The neutral lipid/total lipid ratios of the three microalgae species increased with increasing ferric ion concentration. Neutral lipids accounted for 50.75, 48.37 and 46.59 % of the total lipid in T. subcordiformis, N. oculata and P. viridis, respectively, when cultured in 12 mmol L^?1 ferric ion. The proportions of saturated fatty acids in all three species cultured in 12 mmol L^?1 ferric ion were significantly higher than those cultured in lower ferric ion concentrations. An optimum ferric ion concentration can improve the properties of T. subcordiformis, N. oculata and P. viridis as sources for biodiesel.     

Screening and characterization of Isochrysis strains and optimization of culture conditions for docosahexaenoic acid production

Isochrysis is a genus of marine unicellular microalgae that produces docosahexaenoic acid (DHA, C22:6), a very long chain polyunsaturated fatty acid (PUFA) of significant health and nutritional value. Mass cultivation of Isochrysis for DHA production for human consumption has not been established due to disappointing low DHA productivity obtained from commonly used Isochrysis strains. In this study, 19 natural Isochrysis strains were screened for DHA yields and the results showed that the cellular DHA content ranged from 6.8 to 17.0 % of total fatty acids with the highest DHA content occurring in the exponential growth phase. Isochrysis galbana #153180 exhibited the greatest DHA production potential and was selected for further investigation. The effects of different light intensities, forms, and concentrations of nitrogen, phosphorus, and salinity on growth and DHA production of I. galbana #153180 were studied in a bubble column photobioreactor (PBR). Under favorable culture conditions, I. galbana #153180 contained DHA up to 17.5 % of total fatty acids or 1.7 % of cell dry weight. I. galbana #153180 was further tested in outdoor flat-plate PBRs varying in light path length, starting cell density (SCD), and culture mode (batch versus semicontinuous). When optimized, record high biomass and DHA productivity of I. galbana #153180 of 0.72 g L^?1?day^?1 and 13.6 mg?L^?1?day^?1, or 26.4 g?m^?2?day^?1 and 547.7 mg?m^?2?day^?1, respectively, were obtained, suggesting that I. galbana #153180 may be a desirable strain for commercial production of DHA.     

Lipid and total fatty acid productivity in photoautotrophic fresh water microalgae: screening studies towards biodiesel production

Microalgae are considered as a promising feedstock for biomass production. The selection of the most suitable species is based on several key parameters such as lipid and fatty acid productivity. In the present study, the growth of different microalgae strains was examined in freshwater media for photoautotrophs suited for large-scale applications to identify the most suitable medium for each species. In the optimal medium, Scenedesmus obliquus showed the highest biomass productivity measured as increase of cell dry weight (0.25 g cellu dry weight (CDW) L^?1 day^?1), while Botryococcus braunii showed the highest lipid and total fatty acid content (430 and 270 mg g^?1 CDW, respectively) among the tested species. Regarding lipid and total fatty acid productivity, S. obliquus was the most lipid and total fatty acid productive strain with 41 and 18 mg L^?1 day^?1 during the exponential phase, respectively. Additionally, the proportion of saturated and monounsaturated fatty acids increased with duration of the incubation in S. obliquus, while polyunsaturated fatty acids decreased. These results nominate S. obliquus as a promising microalga in order to serve as a feedstock for renewable energy production.     

Characterization of the triacylglycerol profile in marine diatoms by ultra performance liquid chromatography coupled with electrospray ionization–quadrupole time-of-flight mass spectrometry

Diatoms are considered to have great potential as new biofuel sources because they can effectively accumulate triacylglycerols (TAGs). Detailed structure information of TAG in diatoms is much needed not only for the assessment of biofuel quality such as fatty acid chain length and unsaturation degree but also for the tracing of biosynthetic precursors because the biosynthesis of TAG is typically completed by utilizing the diacylglycerol acyltransferase in the cytoplasm. In this report, a comprehensive characterization of TAGs in marine diatoms was performed using ultra performance liquid chromatography–electrospray ionization–quadrupole time-of-flight mass spectrometry. Many types of major TAGs were identified for the first time in these diatoms: 12 TAGs in Chaetoceros debilis, 9 TAGs in Phaeodactylum tricornutum Bohlin, 16 TAGs in Nitzschia closterium f. minutissima, 16 TAGs in Thalassiosira weissflogii, 13 TAGs in Thalassiosira sp., 16 TAGs in Stephanodiscus asteaea and 7 TAGs in Skeletonema costatum. Semi-quantification of TAGs in these diatoms was also carried out, and it was found that the contents of individual TAGs ranged from 0.5?±?0.1 to 217.9?±?8.1 nmol mg^?1 total lipids. In addition, the total lipid contents in diatoms ranged from 143.6?±?16.3 to 201.1?±?16.3 mg g^?1 dry microalgae and the total TAG contents ranged from 36.8?±?9.5 to 793.2?±?54.4 nmol mg^?1 total lipids. By comparative analysis of the compositions and concentrations of major TAGs in the seven algal strains, N. closterium f. minutissima with high abundance of TAGs containing the most monounsaturated fatty acids (mainly palmitoleic acid) was considered as one of the most promising diatom strains for microalgal biofuel production. Additionally, based on the information of sn-2 fatty acid obtained (mainly C16 in the sn-2 position), we propose the hypothesis that TAGs in diatoms are mainly derived from lipids in chloroplasts through the prokaryotic biosynthesis pathway, including monogalactosyldiacylglycerol and digalactosyldiacylglycerol.