Environmental genomics: exploring the unmined richness of microbes to degrade xenobiotics

Increasing pollution of water and soils by xenobiotic compounds has led in the last few decades to an acute need for understanding the impact of toxic compounds on microbial populations, the catabolic degradation pathways of xenobiotics and the set-up and improvement of bioremediation processes. Recent advances in molecular techniques, including high-throughput approaches such as microarrays and metagenomics, have opened up new perspectives and pointed towards new opportunities in pollution abatement and environmental management. Compared with traditional molecular techniques dependent on the isolation of pure cultures in the laboratory, microarrays and metagenomics allow specific environmental questions to be answered by exploring and using the phenomenal resources of uncultivable and uncharacterized micro-organisms. This paper reviews the current potential of microarrays and metagenomics to investigate the genetic diversity of environmentally relevant micro-organisms and identify new functional genes involved in the catabolism of xenobiotics.     

Recent developments in molecular techniques for identification and monitoring of xenobiotic-degrading bacteria and their catabolic genes in bioremediation

The pollution of soil and water with xenobiotics is widespread in the environment and is creating major health problems. The utilization of microorganisms to clean up xenobiotics from a polluted environment represents a potential solution to such environmental problems. Recent developments in molecular-biology-based techniques have led to rapid and accurate strategies for monitoring, discovery and identification of novel bacteria and their catabolic genes involved in the degradation of xenobiotics. Application of these techniques to bioremediation has also improved our understanding of the composition, phylogeny, and physiology of metabolically active members of the microbial community in the environment. This review provides an overview of recent developments in molecular-biology-based techniques and their application in bioremediation of xenobiotics.     

Understanding the diversity in catabolic potential of microorganisms for the development of bioremediation strategies

Molecular ecological approaches have detected diverse microorganisms that occur in response to pollution and bioremediation; however, most of these organisms have not been isolated, and their physiological traits are poorly understood. One important objective in current bioremediation studies would therefore be an assessment of the physiology and functions of the diverse microbial population at a polluted site. Among the parameters relating to the diversity of the microbial catabolic potential, e.g., substrate specificity, inducer specificity, number of catabolic routes and kinetics of catabolic enzymes, our studies have focused on the kinetic diversity of phenol-degrading bacteria. In one example, a kinetic analysis allowed functionally important phenol-degrading bacteria to be identified in activated sludge; this information could be used to improve the performance of phenol-degrading activated sludge. In an analysis of phenol-degrading bacteria present in trichloroethylene (TCE)-contaminated aquifer soil, the kinetic data could be linked to group-specific monitoring of their phenol-hydroxylase genes. The results have suggested that one group of phenol-degrading bacteria can effectively contribute to TCE bioremediation, while other groups work poorly. Based on this information, we have succeeded in developing a high-performance TCE-degrading bioreactor. We suggest that a careful analysis of the diversity of microbial catabolic potential, particularly of the kinetic traits, may facilitate the development of new bioremediation strategies. This revised version was published online in August 2006 with corrections to the Cover Date.     

Bacterial biofilms and quorum sensing: fidelity in bioremediation technology

Increased contamination of the environment with toxic pollutants has paved the way for efficient strategies which can be implemented for environmental restoration. The major problem with conventional methods used for cleaning of pollutants is inefficiency and high economic costs. Bioremediation is a growing technology having advanced potential of cleaning pollutants. Biofilm formed by various micro-organisms potentially provide a suitable microenvironment for efficient bioremediation processes. High cell density and stress resistance properties of the biofilm environment provide opportunities for efficient metabolism of number of hydrophobic and toxic compounds. Bacterial biofilm formation is often regulated by quorum sensing (QS) which is a population density-based cell–cell communication process via signaling molecules. Numerous signaling molecules such as acyl homoserine lactones, peptides, autoinducer-2, diffusion signaling factors, and α-hydroxyketones have been studied in bacteria. Genetic alteration of QS machinery can be useful to modulate vital characters valuable for environmental applications such as biofilm formation, biosurfactant production, exopolysaccharide synthesis, horizontal gene transfer, catabolic gene expression, motility, and chemotaxis. These qualities are imperative for bacteria during degradation or detoxification of any pollutant. QS signals can be used for the fabrication of engineered biofilms with enhanced degradation kinetics. This review discusses the connection between QS and biofilm formation by bacteria in relation to bioremediation technology.     

Biodegradation of phenol and its derivatives by engineered bacteria: current knowledge and perspectives

Biodegradation of phenolic compounds is a promising alternative to physical and chemical methods used to remove these toxic pollutants from the environment. The ability of various microorganisms to metabolize phenol and its derivatives (alkylphenols, nitrophenols and halogenated derivatives) has therefore been intensively studied. Knowledge of the enzymes catalyzing the individual reactions, the genes encoding these enzymes and the regulatory mechanisms involved in the expression of the respective genes in bacteria serves as a basis for the development of more efficient degraders of phenols via genetic engineering methods. Engineered bacteria which efficiently degrade phenolic compounds were constructed in laboratories using various approaches such as cloning the catabolic genes in multicopy plasmids, the introduction of heterologous genes or broadening the substrate range of key enzymes by mutagenesis. Efforts to apply the engineered strains in in situ bioremediation are problematic, since engineered strains often do not compete successfully with indigenous microorganisms. New efficient degraders of phenolic compounds may be obtained by complex approaches at the organism level, such as genome shuffling or adaptive evolution. The application of these engineered bacteria for bioremediation will require even more complex analysis of both the biological characteristics of the degraders and the physico-chemical conditions at the polluted sites.     

Microbial aspects of atrazine degradation in natural environments

The potential toxicity of thes-triazine herbicide atrazine motivates continuous bioremediation-directed research. Several indigenous soilatrazine-catabolizing microbialassociations and monocultures have been enriched/isolated from compromised sites. Of these, Pseudomonas sp. strain ADP has become a reference strain and has been used to elucidate sequences of the catabolic enzymes atzA, atzB, atzCand atzD involvedin one aerobic degradation pathway and develop probes for the genes which encode these enzymes. Despite this, hitherto unknown or novel microorganisms, with unique sequences and different enzyme-mediated operative pathways, warrant continued investigations for effective site bioremediation. Also, the sustained effectiveness of natural attenuation must be demonstrated continually so regular site evaluations and results analyses, despite the limitations of chemical extraction methodologies, are crucial practices. For both directed and intrinsic bioremediation monitoring, traditional microbial association studies must be complemented by more advanced physiological and molecular approaches. The occurrence of catabolic plasmids, in particular, should be probed with DNA hybridization techniques. Also, PCR-DGGEand subsequent new sequenceelucidation should be used prior to developing new primers for DNA sequences encoding novel catabolic enzymes, and for hybridization probe development, to establish the degradative potential of a compromised site, or adoption of FISH to, for example, monitor bioaugmented remediation.     

Emerging high-throughput approaches to analyze bioremediation of sites contaminated with hazardous and/or recalcitrant wastes

Sustainable development requires the promotion of environmental management and a constant search for new technologies to treat a wide range of aquatic and terrestrial habitats contaminated by increasing anthropogenic activities. Bioremediation, i.e. the elimination of natural or xenobiotic pollutants by living organisms, is an environmentally friendly and cost-effective alternative to physico-chemical cleanup options. However, the strategy and outcome of bioremediation in open systems or confined environments depend on a variety of physico-chemical and biological factors that need to be assessed and monitored. In particular, microorganisms are key players in bioremediation applications, yet their catabolic potential and their dynamics in situ remain poorly characterized. To perform a comprehensive assessment of the biodegradative potential of a contaminated site and efficiently monitor changes in the structure and activities of microbial communities involved in bioremediation processes, sensitive, fast and large-scale methods are needed. Over the last few years, the scientific literature has revealed the progressive emergence of genomic high-throughput technologies in environmental microbiology and biotechnology. In this review, we discuss various high--throughput techniques and their possible--or already demonstrated-application to assess biotreatment of contaminated environments.     

合成生物学改造微生物及生物被膜用于重金属污染检测与修复

随着工业化进程不断加快,重金属污染日益加剧,尤其是水体的重金属污染,已严重威胁人类健康,迫切需要进行有效的污染修复.相比传统物理和化学修复,生物修复具有绿色环保和可持续性的特点.因为微生物生长繁殖迅速、生物被膜具有动态可调节和环境适应性好等特点,使其能更好耐受胁迫环境,在环境修复中有重要作用.合成生物学改造微生物及生物...     

Field applications of genetically engineered microorganisms for bioremediation processes

Genetically engineered microorganisms (GEMs) have shown potential for bioremediation applications in soil, groundwater, and activated sludge environments, exhibiting enhanced degradative capabilities encompassing a wide range of chemical contaminants. However, the vast majority of studies pertaining to genetically engineered microbial bioremediation are supported by laboratory-based experimental data. In general, relatively few examples of GEM applications in environmental ecosystems exist. Unfortunately, the only manner in which to fully address the competence of GEMs in bioremediation efforts is through long-term field release studies. It is therefore essential that field studies be performed to acquire the requisite information for determining the overall effectiveness and risks associated with GEM introduction into natural ecosystems.     

Designing synthetic microbial communities for effectual bioremediation: A review

Abstract

Bioremediation is a better alternative and widely accepted approach used for efficient degradation of environmental pollutants released from industries, urban and agricultural activities due to its eco-friendly nature. Systems biology helps in the identification of new genes, proteins, metabolites, and metabolic pathways involved in bioremediation. Such information can be used for designing synthetic microbial communities that can degrade multiple recalcitrant pollutants simultaneously. This review gives a brief insight into various systems biology tools towards providing a greater understanding of microbial behaviour and improving the way of bioremediation. These techniques alone or in combination, provide a way to understand and improve the genetic potential of microorganisms to remediate various environmental contaminants efficiently. Further, this review also describes the successful employment of synthetic microbial consortium in the bioremediation. Moreover, In-silico tools are also described to analyse the data obtained through different laboratory experiments as well to predict the behaviour of microbial consortium towards the pollutants using different databases.     

合成生物学技术在环境保护中的应用

合成生物学是一个基于生物学和工程学原理的科学领域,其目的是重新设计和重组微生物,以优化或创建具有增强功能的新生物系统。该领域利用分子工具、系统生物学和遗传框架的重编程,从而构建合成途径以获得具有替代功能的微生物。传统上,合成生物学方法通常旨在开发具有成本效益的微生物细胞工厂进而从可再生资源中生产化学物质。然而,近年来合成生物学技术开始在环境保护中发挥着更直接的作用。本综述介绍了基因工程中的合成生物学工具,讨论了基于基因工程的微生物修复策略,强调了合成生物学技术可以通过响应特定污染物进行生物修复来保护环境。其中,规律间隔成簇短回文重复序列(Clustered Regularly Interspersed Short Palindromic Repeats, CRISPR)技术在基因工程细菌和古细菌的生物修复中得到了广泛应用,生物修复领域也出现了很多新的先进技术,包括生物膜工程、人工微生物群落的构建、基因驱动、酶和蛋白质工程等。有了这些新的技术和工具,生物修复将成为当今最好和最有效的污染物去除方式之一。     

Biochemistry,genetics and physiology of microbial styrene degradation

The last few decades have seen a steady increase in the global production and utilisation of the alkenylbenzene, styrene. The compound is of major importance in the petrochemical and polymer-processing industries, which can contribute to the pollution of natural resources via the release of styrene-contaminated effluents and off-gases. This is a cause for some concern as human over-exposure to styrene, and/or its early catabolic intermediates, can have a range of destructive health effects. These features have prompted researchers to investigate routes of styrene degradation in microorganisms, given the potential application of these organisms in bioremediation/biodegradation strategies. This review aims to examine the recent advances which have been made in elucidating the underlying biochemistry, genetics and physiology of microbial styrene catabolism, identifying areas of interest for the future and highlighting the potential industrial importance of individual catabolic pathway enzymes.     

Metabolic networks,microbial ecology and ‘omics’ technologies: towards understanding in situ biodegradation processes

Microbial degradation is the main mechanism responsible for the recovery of contaminated sites, where a huge body of investigations is available in which most concentrate on single isolates from soils capable of mineralizing pollutants. The rapid development of molecular techniques in recent years allows immense insights into the processes in situ, including identification of organisms active in target sites, community member interactions and catabolic gene structures. Only a detailed understanding of the functioning and interactions within microbial communities will allow their rational manipulation for the purpose of optimizing bioremediation efforts. We will present the status of the current capabilities to assess and predict catabolic potential of environmental sites by applying gene fingerprinting, catabolome arrays, metagenomics and complementary ‘omics’ technologies. Collectively, this will allow tracking regulation and evolution within microbial communities ultimately aiming to understand the mechanisms taking place in large scale bioremediation treatments for aromatic decontamination.     

Coupling microbial catabolic actions with abiotic redox processes: A new recipe for persistent organic pollutant (POP) removal

The continuous release of toxic persistent organic pollutants (POPs) into the environment has raised a need for effective cleanup methods. The tremendous natural diversity of microbial catabolic mechanisms suggests that catabolic routes may be applied to the remediation of POP-contaminated fields. A large number of the recalcitrant xenobiotics have been shown to be removable via the natural catabolic mechanisms of microbes, and detailed biochemical studies of the catabolic methods, together with the development of sophisticated genetic engineering, have led to the use of synthetic microbes for the bioremediation of POPs. However, the steric effects of substituted halogen moieties, microbe toxicity, and the low bioavailability of POPs still deteriorate the efficiency of removal strategies based on natural and synthetic catabolic mechanisms. Recently, abiotic redox processes that induce rapid reductive dehalogenation, hydroxyl radical-based oxidation, or electron shuttling have been reasonably coupled with microbial catabolic actions, thereby compensating for the drawbacks of biotic processes in POP removal. In this review, we first compare the pros and cons of individual methodologies (i.e., the natural and synthetic catabolism of microbes and the abiotic processes involving zero-valent irons, advanced oxidation processes, and small organic stimulants) for POP removal. We then highlight recent trends in coupling the biotic–abiotic methodologies and discuss how the processes are both feasible and superior to individual methodologies for POP cleanup. Cost-effective and environmentally sustainable abiotic redox actions could enhance the microbial bioremediation potential for POPs.     

Recent developments in microbial biotransformation and biodegradation of dioxins

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), commonly known as dioxins (PCDD/Fs), are toxic environmental pollutants formed from various sources. Elimination of these pollutants from the environment is a difficult task due to their persistent and ubiquitous nature. Removal of dioxins by biological degradation (biodegradation) is considered a feasible method as an alternative to other expensive physicochemical approaches. Biodegradation of dioxins has been extensively studied in several microorganisms, and details concerning biodiversity, biodegradation, biochemistry and molecular biology of this process have accumulated during the last three decades. There are several microbial mechanisms responsible for biodegradation of dioxins, including oxidative degradation by dioxygenase-containing aerobic bacteria, bacterial and fungal cytochrome P-450, fungal lignolytic enzymes, reductive dechlorination by anaerobic bacteria, and direct ether ring cleavage by fungi containing etherase-like enzymes. Many attempts have been made to bioremediate PCDD/Fs using this basic knowledge of microbial dioxin degradation. This review emphasizes the present knowledge and recent advancements in the microbial biotransformation, biodegradation and bioremediation of dioxins.     

Responses exhibited by various microbial groups relevant to uranium exposure

There is a strong interest in knowing how various microbial systems respond to the presence of uranium (U), largely in the context of bioremediation. There is no known biological role for uranium so far. Uranium is naturally present in rocks and minerals. The insoluble nature of the U(IV) minerals keeps uranium firmly bound in the earth’s crust minimizing its bioavailability. However, anthropogenic nuclear reaction processes over the last few decades have resulted in introduction of uranium into the environment in soluble and toxic forms. Microbes adsorb, accumulate, reduce, oxidize, possibly respire, mineralize and precipitate uranium. This review focuses on the microbial responses to uranium exposure which allows the alteration of the forms and concentrations of uranium within the cell and in the local environment. Detailed information on the three major bioprocesses namely, biosorption, bioprecipitation and bioreduction exhibited by the microbes belonging to various groups and subgroups of bacteria, fungi and algae is provided in this review elucidating their intrinsic and engineered abilities for uranium removal. The survey also highlights the instances of the field trials undertaken for in situ uranium bioremediation. Advances in genomics and proteomics approaches providing the information on the regulatory and physiologically important determinants in the microbes in response to uranium challenge have been catalogued here. Recent developments in metagenomics and metaproteomics indicating the ecologically relevant traits required for the adaptation and survival of environmental microbes residing in uranium contaminated sites are also included. A comprehensive understanding of the microbial responses to uranium can facilitate the development of in situ U bioremediation strategies.     

细菌对环境污染物的趋化性及其在生物修复中的作用

细菌对有机化合物的降解能力是一种利用碳源和能源的优势,这种能力可以用来设计安全、有效和无二次污染的污染物的生物修复系统。趋化性是细菌适应外界化学环境变化而作出的行为反应,是一种寻找碳源和能源的优势。细菌的趋化性能够增强细菌在自然环境中的降解污染物的效果,细菌的趋化性与降解性之间的关系研究已经成为热点。介绍了细菌的趋化性的基本概念和趋化信号转导的机制,重点讨论了细菌对环境污染化合物的趋化性,从基因水平揭示了趋化性与降解性之间的紧密联系,认为趋化性可以有效地促进降解性细菌对污染物的生物修复作用。