Dielectric Dispersion in Ga<Subscript>2</Subscript>S<Subscript>3</Subscript> Thin Films

In this work, the structural, compositional, optical, and dielectric properties of Ga₂S₃ thin films are investigated by means of X-ray diffraction, scanning electron microscopy, energy dispersion X-ray analysis, and ultraviolet—visible light spectrophotometry. The Ga₂S₃ thin films which exhibited amorphous nature in its as grown form are observed to be generally composed of 40.7 % Ga and 59.3 % S atomic content. The direct allowed transitions optical energy bandgap is found to be 2.96 eV. On the other hand, the modeling of the dielectric spectra in the frequency range of 270–1,000 THz, using the modified Drude-Lorentz model for electron-plasmon interactions revealed the electrons scattering time as 1.8 (fs), the electron bounded plasma frequency as ~0.76–0.94 (GHz) and the reduced resonant frequency as 2.20–4.60 ×10¹⁵ (Hz) in the range of 270–753 THz. The corresponding drift mobility of electrons to the terahertz oscillating incident electric field is found to be 7.91 (cm ²/Vs). The values are promising as they nominate the Ga₂S₃ thin films as effective candidates in thin-film transistor and gas sensing technologies.     

Overpotentials and Faraday Efficiencies in CO2 Electrocatalysis–the Impact of 1‐Ethyl‐3‐Methylimidazolium Trifluoromethanesulfonate

The mixtures of room temperature ionic liquid 1‐ethyl‐3‐methylimidazolium trifluoromethanesulfonate ([EMIM]TFO) and water as electrolytes for reduction of CO₂ to CO are reported. Linear sweep voltammetry shows overpotentials for CO₂ reduction and the competing hydrogen evolution reaction (HER), both of which vary as a function of [EMIM]TFO concentration in the range from 4 × 10^?3m (0.006 mol%) to 4869 × 10^?3m (50 mol%). A steady lowering of overpotentials up to an optimum for 334 × 10?³m is identified. At 20 mol% and more of [EMIM]TFO, a significant CO₂ reduction plateau and inhibition of HER, which is limited by H₂O diffusion, is noted. Such a plateau in CO₂ reduction correlates to high CO Faraday efficiencies. In case of 50 mol% [EMIM]TFO, a broad plateau spanning over a potential range of 0.58 V evolves. At the same time, the overpotential for HER is increased by 1.20 V when compared to 334 × 10^?3m and, in turn, HER is largely inhibited. The Faraday efficiencies for CO and H₂ formation feature 95.6% ± 6.8% and 0.5% ± 0.3%, respectively, over a period of 3 h in a separator divided cell. Cathodic as well as anodic electrochemical stability of the electrolyte throughout this time period is corroborated in ¹H NMR spectroscopic measurements.     

A Lithium Amide‐Borohydride Solid‐State Electrolyte with Lithium‐Ion Conductivities Comparable to Liquid Electrolytes

High ionic conductivity of up to 6.4 × 10^?3 S cm^?1 near room temperature (40 °C) in lithium amide‐borohydrides is reported, comparable to values of liquid organic electrolytes commonly employed in lithium‐ion batteries. Density functional theory is applied coupled with X‐ray diffraction, calorimetry, and nuclear magnetic resonance experiments to shed light on the conduction mechanism. A Li₄Ti₅O₁₂ half‐cell battery incorporating the lithium amide‐borohydride electrolyte exhibits good rate performance up to 3.5 mA cm^?2 (5 C) and stable cycling over 400 cycles at 1 C at 40 °C, indicating high bulk and interfacial stability. The results demonstrate the potential of lithium amide‐borohydrides as solid‐state electrolytes for high‐power lithium‐ion batteries.     

Dynamics of reductive TCE dechlorination in two distinct H<Subscript>2</Subscript> supply scenarios and at various temperatures

Anaerobic microbial dechlorination of trichloroethene (TCE) by a mixed, Dehalococcoides containing culture was investigated at different temperatures (4–60 °C) using propionate and lactate as a slow- and fast-releasing hydrogen (H₂) source, respectively. Distinct temperature-dependent dynamics of substrate fermentation and H₂ levels could explain observed patterns of dechlorination. While varying the temperature caused changes in rate, the overall pattern of dechlorination was characteristic of the supplied electron donor. Feeding cultures with a rapidly fermentable substrate such as lactate generally resulted in high H₂ concentrations and fast and complete dechlorination accompanied by rapid methanogenesis. In contrast, low H₂ release rates resulting from fermentation of propionate were associated with 2 to 3−fold longer time frames necessary for complete dechlorination at intermediate temperatures (15–30 °C). A lag-phase prior to dechlorination of cis-dichloroethene (cDCE), together with a characteristic build-up of H₂ and methane, was consistently observed at slow H₂ supply. At temperatures of 10 °C and lower, the system remained in this lag phase and no dechlorination past cDCE was observed within the experimental time frame. However, when lactate was the substrate, complete dechlorination of TCE occurred within 74 days at 10 °C, accompanied by methane production. The choice of fermentable substrate decisively influenced the rate and degree of dechlorination at an electron donor/TCE ratio as high as 666:1. Temperature-dependent H₂ levels resulting from fermentation of different substrates could be satisfactorily explained through thermodynamic calculations of the Gibbs free energy yield assuming a constant metabolic energy threshold of −20 kJ/(mol reaction).     

Improved hydrogen photoproduction regulated by carbonylcyanide <Emphasis Type="Italic">m</Emphasis>-chlorophenylhrazone from marine green alga <Emphasis Type="Italic">Platymonas subcordiformis</Emphasis> grown in CO<Subscript>2</Subscript>-supplemented air bubble column bioreactor

To develop an integrated process of CO₂-fixation and H₂ photoproduction by marine green microalga Platymonas subcordiformis, the impact of algal cells grown in CO₂-supplemented air bubble column bioreactor was investigated on H₂ photoproduction regulated by carbonylcyanide m-chlorophenylhrazone. Highest cell growth (3.85 × 10⁶ cells ml⁻¹), starch content (0.25 ± 0.08 mg per 10⁶ cells) and hydrogen production (50 ± 3 ml l⁻¹) were achieved at 3% CO₂-supplemented culture, which are respectively 1.4, 2.1, 1.5-fold of the air-supplemented culture. Improved H₂ production correlated well with the increase in starch accumulation. In this process, the algal cells have been recycled for stable H₂ production of 40–50 ml l⁻¹ over five cycles.     

Determination of the electron density and electric field in the plasma of a low-pressure microwave electrode discharge in hydrogen from the measured spectral line intensities

The parameters of the plasma of a microwave electrode discharge in hydrogen at pressures of 1–8 torr and incident powers of 20–80 W are measured by the so-called “relative intensity” method. The method allows one to determine the electron density and electric field in plasma by measuring the relative intensities of the H_α, H_β, and 763.5-nm Ar line emission and calculating the electron-impact rate constants from the homogeneous Boltzmann equation. The measurements show that there are regions in the discharge where the electron density is higher (a bright electrode sheath) and lower (a spherical region) than the critical density for the frequency 2.45 GHz (n_cr～7×10¹⁰ cm^?3). Inside the spherical region, the electric field varies slightly over the radius and the electron density increases as the discharge boundary is approached. The observed discharge structure can be attributed to the presence of a self-sustained discharge zone (electrode sheath); a non-self-sustained discharge zone (spherical region); and a decaying plasma region, which is separated from the active discharge zone by an electric double layer.     

An investigation into possible quantum chaos in the H<Subscript>2</Subscript> molecule under intense laser fields via Ehrenfest phase space (EPS) trajectories

By employing the Ehrenfest "phase space" trajectory method for studying quantum chaos, developed in our laboratory, the present study reveals that the H₂ molecule under intense laser fields of three different intensities, I?=?1?×?10¹⁴ W/cm², 5?×?10¹⁴ W/cm², and 1?×?10¹⁵ W/cm², does not show quantum chaos. A similar conclusion is also reached through the Loschmidt echo (also called quantum fidelity) calculations reported here for the first time for a real molecule under intense laser fields. Thus, a long-standing conjecture about the possible existence of quantum chaos in atoms and molecules under intense laser fields has finally been tested and not found to be valid in the present case.     

The peroxidase activity of cytochrome <Emphasis Type="Italic">b</Emphasis><Subscript>6</Subscript><Emphasis Type="Italic">f</Emphasis> complex from spinach chloroplasts

The cytochrome b ₆ f (Cyt b ₆ f) complex, which functions as a plastoquinol-plastocyanin oxidoreductase and mediates the linear electron flow between photosystem II (PSII) and photosystem I (PSI) and the cyclic electron flow around PSI, was isolated from spinach (Spinacia oleracea L.) chloroplasts using n-octyl-β-D-glucopyranoside (β-OG). The preparation was also able to catalyze the peroxidase-like reaction in the presence of hydrogen peroxide (H₂O₂) and guaiacol. The optimal conditions for peroxidase activity of the preparation included: pH 3.6, ionic strength 0.1, and temperature 35°C. The apparent Michaelis constant (K _m) values for H₂O₂ and guaiacol were 50 mM and 2 mM, respectively. The bimolecular rate constant (k _obs) was about 26 M⁻¹ s⁻¹ and the turnover number (K _cat) was about 60 min⁻¹ (20 mM guaiacol, 100 mM sodium phosphate, pH 3.6, 25°C, [H₂O₂]<100mM). These parameters were similar to those of several other heme-containing proteins, such as myoglobin and Cyt c.     

Chemiluminescence intensities and spectra of luminol oxidation by sodium hypochlorite in the presence of hydrogen peroxide

Hydrogen peroxide amplifies the chemiluminescence in the oxidation of luminol by sodium hypochlorite. A linear relationship between concentration of hydrogen peroxide and light intensity was found in the concentration range 5 × 10^?8?7.5 × 10^?6 mol/l. At 7.5 × 10^?6 mol/l H₂O₂ the chemiluminescence is amplified 550—fold. The chemiluminescence spectra of these reactions have a wavelength maximum at 431 nm independent of the concentration of hydrogen peroxide. The results indicate that hydrogen peroxide is a necessary component in the chemiluminescent oxidation of the luminol by sodium hypochlorite.     

Insight into the lithium/hydrogen bonding in (CH<Subscript>2</Subscript>)<Subscript>2</Subscript>X...LiY/HY (X: C=CH<Subscript>2</Subscript>, O,S; Y=F,Cl, Br) complexes

The nature of the lithium/hydrogen bonding between (CH₂)₂X(X: C=CH₂, O, S) and LiY/HY(Y=F, Cl, Br) have been theoretically investigated at MP2/6-311++G (d, p) level, using Bader’s “atoms in molecules (AIM)” theory and Weinhold’s “natural bond orbital (NBO)” methodology. The molecule formation density differences (MFDD) of the titled complexes are analyzed. Two kinds of geometries of the lithium/hydrogen bonded complexes are compared. As a whole, the nature of lithium bond and hydrogen bond are different. For the same electron donor and the same acceptor, lithium bond is stronger than hydrogen bond. For the same electron acceptor and different kind of donors, the interaction energies follows the n-type> π-type > pseudo-π-type order. For the same (CH₂)₂X, the interaction energy increases in the sequence of Y=F, Cl and Br for lithium bond systems while it decreases for hydrogen bond systems. Electron transfer plays an important role in the formation of lithium bond systems while it is less important in the hydrogen bond systems.     

Determination of shelf life of <Emphasis Type="Italic">Spirulina platensis</Emphasis> (MI<Subscript>2</Subscript>) grown in the Philippines

Gamma linolenic acid (GLA) degradation in Spirulina followed first-order reaction kinetics. At an accelerated temperature range of 45 to 55°C, the degradation rate constants (k _r) of GLA obtained were 4.0 × 10⁻² to 8.8 × 10⁻² day⁻¹. The energy of activation (E _a) was 16.53 kcal mol⁻¹, and the Q₁₀ was 2.22. Based on 20% GLA degradation, the shelf life of sun-dried Spirulina at 30°C is 263 days or 8.6 months using the Arrhenius plot, and 258 days or 8.5 months using the Q ₁₀ approach. Presented at the 6th Meeting of the Asia Pacific Society of Applied Phycology, Manila, Philippines.     

Chemiluminescent assay of β-D-galactosidase based on indole luminescence

We developed a novel chemiluminescent assay of β-D -galactosidase (β-gal) based on the chemiluminescence of indole. 5-Bromo-4-chloro-3-indolyl-β-D -galactopyranoside (X-gal) was used as a substrate for β-gal and also as a light emitter. X-gal was hydrolysed by β-gal to liberate free indoxyl, followed by oxidation to indigo dye, and simultaneously produces hydrogen peroxide (H₂O₂). H₂O₂ reacts with the residual X-gal in the presence of horseradish peroxidase (HRP) to emit light. The measurable range of β-gal obtained by this method was 6 × 10⁻¹⁴ mol/L to 6 × 10⁻¹¹ mol/L; the detection limit was 3 amol/assay. This chemiluminescent assay could be applied to an enzyme immunoassay of thyroxine using β-gal as the enzyme label. © 1998 John Wiley & Sons, Ltd.     

A hydrogen peroxide biosensor based on the direct electrochemistry of hemoglobin modified with quantum dots

Direct electron transfer of hemoglobin modified with quantum dots (QDs) (CdS) has been performed at a normal graphite electrode. The response current is linearly dependent on the scan rate, indicating the direct electrochemistry of hemoglobin in that case is a surface-controlled electrode process. UV–vis spectra suggest that the conformation of hemoglobin modified with CdS is little different from that of hemoglobin alone, and the conformation changes reversibly in the pH range 3.0–10.0. The hemoglobin in a QD film can retain its bioactivity and the modified electrode can work as a hydrogen peroxide biosensor because of its peroxidase-like activity. This biosensor shows an excellent response to the reduction of H₂O₂ without the aid of an electron mediator. The catalytic current shows a linear dependence on the concentration of H₂O₂ in the range 5 × 10⁻⁷–3 × 10⁻⁴ M with a detection limit of 6 × 10⁻⁸ M. The response shows Michaelis–Menten behavior at higher H₂O₂ concentrations and the apparent Michaelis–Menten constant is estimated to be 112 μM.     

Production of Fermentable Sugars and Hydrogen-Rich Gas from <Emphasis Type="Italic">Agave tequilana</Emphasis> Biomass

The Mexican tequila industry annually processes approximately 1 × 10⁶ Agave tequilana plants, generating approximately 1.78 × 10⁸ kg of bagasse per year. This biomass is considered an attractive alternative to fossil fuels as an energy source and to produce biofuels and/or chemical products because it is produced and used without adversely affecting the environment. The first aim of the present work was to determine the effect of temperature, the concentration of H₂SO_4, and reaction time on the hydrolysis of agave bagasse to maximize the fermentable sugars using a steam explosion. This step process generated 71.11 g/L of reducible sugars in the supernatant (59.29 % glucose, 29.05 % xylose, and 11.66 % fructose) and unconverted organic matter of enzymatic hydrolysis bagasse (35.4 % α-cellulose, 7.33 % hemicellulose, 49.91 % lignin, and 7.31 % ashes). A mathematical surface response analysis of the hydrolysis was used for process optimization. The second aim involves the study of the thermodynamics of the reforming of unconverted organic matter from enzymatic hydrolysis of Agave tequilana bagasse (ATB) evaluated by the Gibbs free energy minimization method for hydrogen production. The effect of the parameters on the system performance measures, such as reaction temperature (T), Water/Biomass ratio (WBR), and pressure (P), were also investigated. The maximum H₂ production obtained was 23.2 mol of H₂/271.5 g ATB with a WBR ≥ 11 and a temperature of 740 °C. These findings indicate that the temperature and WBR are essential factors in the production of H₂, which was reflected in the efficiency of the process.     

Determination of vitamin B6 using an optimized novel TCPO–indolizine–H2O2 chemiluminescence system

Indolizine derivatives are of great interest as fluorescent emitters for peroxyoxalate chemiluminescence. The reaction of peroxyoxalates such as bis‐(2,4,6‐trichlorophenyl) oxalate (TCPO) with H₂O₂ can transfer energy to fluorescer via the formation of dioxetanedione intermediate. Four indolizine derivatives were used as a novel fluorescer in the chemiluminescence (CL) systems in this study. The relationship between CL intensity and the concentration of fluorescer, peroxyoxalate, sodium salicylate and hydrogen peroxide was investigated. Optimum conditions were obtained for four fluorescers and it was found that the indolizine can be used as an efficient green fluorescence emitter. Vitamin B₆ induces a sharp decrease in the CL intensity of the TCPO–hydrogen peroxide–sodium salicylate system. A simple, rapid and sensitive CL method for the determination of vitamin B₆ has been developed. The results showed a linear relationship between vitamin B₆ concentration and peroxyoxalate CL intensity in the range 7.0 × 10⁻⁸–1.0 × 10⁻⁴. A detection limit of 2.3 × 10⁻⁸ M and relative standard deviation (RSD) of < 4.5% were obtained. Copyright © 2014 John Wiley & Sons, Ltd.     

Plasmonic Au-MoO<Subscript>3</Subscript> Colloidal Nanoparticles by Reduction of HAuCl<Subscript>4</Subscript> by Blue MoO<Subscript>x</Subscript> Nanosheets and Observation of the Gasochromic Property

Defective colloids of blue MoO_x nanosheets were prepared by anodizing exfoliation method in water. This colloidal solution exhibits an optical plasmonic absorption band in the infrared region at about 760 nm. Merely mixing HAuCl₄ solution with the MoO_x leads to loss of the blue color, decaying of 760 nm plasmonic peak and simultaneous formation of the gold plasmon absorption peak at 550–570 nm. Some spectral variations in gold plasmonic peak and MoO_x optical band gap were observed for Mo:Au ratio of 10:1, 20:1, 30:1, and 40:1. The size of the gold nanoparticles was in the 5–6 nm range with fcc crystalline structure. X-ray photoelectron spectroscopy (XPS) revealed that the initial solution contains Mo⁵⁺ states and hydroxyl groups, which after reduction, hydroxyl groups are eliminated and the Mo⁵⁺ states converted to Mo⁶⁺. The obtained Au-MoO₃ colloids have a gasochromic property in which they are colored back to blue in the presence of hydrogen gas and the molybdenum oxide absorption peak recovered again. Furthermore, it was observed that both gold and Mo oxide plasmonic peaks redshift by insertion of hydrogen gas which is attributed to change in solution refractive index and formation of defect concentration.     

A Raman and calorimetric investigation of 3′, 5′ GpG

The Raman spectra of guanylyl (3′-5′) guanosine (GpG) in solution in H₂O and D₂O at pH 3–7 have been recorded at various temperatures between 0 and 80°C. The results are consistent with the existence in the lower temperature range of stable aggregates formed by the stacking of GpG tetramers. The aggregates melt cooperatively near 60°C, which results in important changes in the spectra. Among these, a large increase in intensity of some of the bands assigned to the guanine residues shows that unstacking of the bases occurs at the melting. Also apparent in the spectra are changes in the intensity and frequency of band attributable to molecular groups involved in intermolecular hydrogen bonding between adjacent molecules in the complex. The melting temperature of GpG decreases by approximately 15°C upon lowering the concentration from 5 × 10^?2 to 5 × 10^?4M, as shown by Raman, calorimetric, CD, and uv measurements. The experimentally determined ΔH and ΔS for the melting transition are 9 Kcal/mol and 28 e.u./mol, respectively. The aggregation of GpG in 1.5 × 10^?3M solutions was found to be very slow. The half-time of the process, which roughly follows first-order kinetics, is approximately 3 min at 10°C and 21 min at 35°C. The negative energy of activation associated with this reaction (?143 Kcal) indicated that the process involves intermediates whose concentrations decrease the temperatures raised, thus slowing down the overall process. The rate of disaggregation of GpG upon dilution to very low concentration is also extremely slow, indicating that the GpG aggregates, once formed, are very stable.     

Stress-Tolerant <Emphasis Type="Italic">Viridibacillus arenosi</Emphasis> Strain IHB B 7171 from Tea Rhizosphere as a Potential Broad-Spectrum Microbial Inoculant

Viridibacillus arenosi strain IHB B 7171 identified based on 16S rRNA gene sequence produced colony forming units (cfu/ml) ranging from 3.3 × 10⁴ to 1.2 × 10¹⁰ under pH 5–11, 2.2 × 10² to 1.4 × 10¹⁰ for temperature 5–40 °C, 2.4 × 10² to 1.1 × 10¹⁰ for PEG 6000 10–30%, 2.2 × 10² to 1.4 × 10¹⁰ for 2.5–10% NaCl, 3.1 × 10³ to 1.7 × 10⁹ for 2.5–7.5 mM CaCl₂, 2.2 × 10² to 1.4 × 10⁷ for 2.5–7.5 mM AlCl₃, and 3.2 × 10² to 1.2 × 10⁷ for 2.5–7.5 mM FeCl₃. The activities of plant growth-promoting attributes with the increasing acidity, desiccation and salinity ranged from 408 to 101, 20 to 8, 14 to 5 µg/ml P-liberated from tri-calcium phosphate, aluminium phosphate and iron phosphate, 20–9% siderophore units, 14–4 µg/ml IAA and 190–16 α-ketobutyrate h/mg protein ACC-deaminase activity. Plant height, leaf number, and leaf weight on treatment with bacterial inoculum showed an increment of 9.5, 17.6, 54.5 and 31.0% in tea seedlings, respectively. The bacterium also enhanced plant height and yield by 10 and 13% in pea and 2.8 and 13.9% in wheat. The results exhibited stress-tolerance and plant growth-promoting activities by the strain under stressed growth-conditions with potential as a broad-spectrum plant growth-promoting rhizobacterium.     

Changes in concentrations of soluble carbohydrates during germination of <Emphasis Type="Italic">Amaranthus caudatus</Emphasis> L. seeds in relation to ethylene,gibberellin A<Subscript>3</Subscript> and methyl jasmonate

Unimbibed Amaranthus caudatus seeds were found to contain stachyose, raffinose, verbascose, sucrose, galactinol, myo-inositol, glucose and fructose, while no galactose, maltose and maltotriose was detected. During imbibition, seed concentrations of verbascose, stachyose, raffinose, galactinol, myo-inositol (temporary) and fructose (transient) were observed to decrease; concentrations of galactose and maltose remained fairly constant, while those of sucrose, glucose and maltotriose increased, the increase in sucrose concentration was only temporary. Effects of gibberellin A₃ (GA₃) at 3 × 10⁻⁴ M and ethephon at 3 × 10⁻⁴ M alone or in the presence of methyl jasmonate (Me-JA) at 10⁻³ M on concentrations of soluble sugars during germination of A. caudatus seeds were examined. Me-JA was found to inhibit seed germination and fresh weight of the seeds, but did not affect sucrose, myo-inositol, galactose and maltose concentrations during imbibition for up to 20 h. The exogenously applied GA₃ was observed to enhance germination, stachyose breakdown and glucose concentration after 20 h of incubation. Ethephon stimulated seed germination as well as utilisation of stachyose, galactinol (both after 14 and 20 h) and raffinose (after 14 h of incubation). Although the stimulatory effect of either GA₃ or ethephon on seed germination was blocked by Me-JA; these stimulators increased mobilisation of raffinose and stachyose, but only ethephon enhanced both glucose and fructose after 14 and/or 20 h of incubation in the presence of Me-JA. The maltose concentration was increased by both GA₃ and ethephon alone and in the presence of Me-JA. Of the growth regulators studied, ethephon alone and/or in combination with Me-JA significantly increased the concentrations of glucose, fructose, galactose, maltose and maltotriose. The differences in sugar metabolism appear to be linked to ethylene or GA₃ applied simultaneously with Me-JA.     

Effect of hydrogen ratio on plasma parameters of N2-H2 gas mixture glow discharge

A dc plane glow discharge in a nitrogen-hydrogen (N₂-H₂) gas mixture has been operated at discharge currents of 10 and 20 mA. The electron energy distribution function (EEDF) at different hydrogen concentrations is measured. A Maxwellian EEDF is found in the positive column region, while in both cathode fall and negative glow regions, a non-Maxwellian one is observed. Langmuir electric probes are used at different axial positions, gas pressures, and hydrogen concentrations to measure the electron temperature and plasma density. The electron temperature is found to increase with increasing H₂ concentration and decrease with increasing both the axial distance from the cathode and the mixture pressure. At first, with increasing distance from the cathode, the ion density decreases, while the electron density increases; then, as the anode is further approached, they remain nearly constant. At different H₂ concentrations, the electron and ion densities decrease with increasing the mixture pressure. Both the electron and ion densities slightly decrease with increasing H₂ concentration.