Improvement of transformation and electroduction in avermectin high-producer,<Emphasis Type="Italic">Streptomyces avermitilis</Emphasis>

Factors affecting the PEG-mediated transformation and electrotransformation of Streptomyces avermitilis protoplasts, an industrial avermectin high-producer, were evaluated. The maximum protoplast transformation efficiency under optimum conditions with PEG was 3 x 106 transformants per microg plasmid pIJ702 DNA. The efficiency of electrotransformation with the same plasmid the intact cells grown in medium with 0.5 mmol/L CaCl2, suspended in buffer with 0.5 mol/L sucrose +1 mmol/L MgCl2, and pulsed at an electric field strength of 10 kV/cm, 800 ohms, 25 microF, was of 2 x 10(3) transformants per microg DNA. When the cells were electroporated after mild lysozyme-treatment, the efficiency was up to 10(4) transformants per microg DNA. Electroporation of protoplasts and germlings had a lower efficiency (10(2) transformants per microg DNA). We report that electroporation under optimum conditions can be used for direct transfer of nonconjugative plasmid pIJ699 between two different Streptomyces species, S. avermitilis and S. lividans.     

A transformation system for an ectomycorrhizal basidiomycete, Lyophyllum shimeji

A transformation vector, pLS-hph, was constructed with the promoter and terminator of the glyceraidehyde-3-phosphate dehydrogenase (GPD) gene derived from an ectomycorrhizal basidiomycete, Lyophyllum shimeji, and with the hygromycin B (HmB) phosphotransferase (hph) gene from Escherichia coli. This vector was introduced into protoplasts of L. shimeji and 3.4 transformants per microg plasmid DNA were obtained. In most of the transformants, multiple copies of the vector were integrated into the genomic DNA. The results indicate that pLS-hph is a useful vector for L. shimeji.     

Optimum Conditions for Electric Pulse-mediated Gene Transfer to Bacillus subtilis Cells

It was found that plasmid DNA (pUB 110) can be introduced into not only protoplasts but also intact cells of Bacillus subtilis by electric field pulses. The transformation of, B. subtilis using protoplasts results in an efficiency of 2.5 × 10⁴ transformants per μg of DNA, with a single pulse of 50 jisec with an initial electric field strength of 7kV/cm. Even transformation of intact B. subtilis cells results in a maximum efficiency of 1.5 × 10³ transformants per μg DNA, with a single pulse of 400 μsec with an initial electric field strength of 16kV/cm. The cell survival of protoplasts and intact cells was approximately 100% and 30%, respectively, under the conditions found to be optimal for the transformation process. Plasmid DNA isolated from pUB 110 containing transformants was indistinguishable from authentic preparations of pBU 110 on gel electrophoretic analysis.     

High-efficiency transformation of Rhizobium leguminosarum by electroporation.

Electrotransformation of Rhizobium leguminosarum was successfully carried out with a 15.1-kb plasmid, pMP154 (Cmr), containing a nodABC-lacZ fusion by electroporation. The maximum transformation efficiency, 10(8) transformants/microg of DNA, was achieved at a field strength of 14 kV/cm with a pulse of 7.3 ms (186 Omega). The number of transformants was found to increase with increasing cell density, with no sign of saturation. In relation to DNA dosage, the maximum transformation efficiency (5.8 x 10(8) transformants/microg of DNA) was obtained with 0.5 microg of DNA/ml of cell suspension, and a further increase in the DNA concentration resulted in a decline in transformation efficiency.     

Genetic transformation of Chainia and heat attenuation of its restriction system.

A PEG-mediated transformation system for Chainia (NCL 82-5-1) was developed using a broad host range Streptomyces vector, pIJ702. Protoplasts prepared from Chainia (NCL 82-5-1) were regenerated with 5% efficiency. Transformation of the protoplasts with pIJ702 gave 10-20 transformants/micrograms DNA. The low efficiency of transformation is attributed to a restriction system in Chainia; this could be inhibited by treating the protoplasts at 42 degrees C for 10 min just before transformation. The yield of transformants increased 100-fold when pIJ702 was modified by passage in Chainia. Because the plasmid replicon was functional in Chainia and the modified plasmid was stably maintained, the transformation system should be useful for self-cloning in Chainia NCL 82-5-1 of the many commercially important enzymes this strain is known to produce.     

Protoplast transformation of glutamate-producing bacteria with plasmid DNA

A method for polyethylene glycol-induced protoplast transformation of glutamate-producing bacteria with plasmid DNA was established. Protoplasts were prepared from cells grown in the presence of penicillin by treatment with lysozyme in a hypertonic medium. The concentration of penicillin during growth affected the efficiency of formation, regeneration, and polyethylene glycol-induced DNA uptake of protoplasts. Regeneration of protoplasts was accomplished on a hypertonic agar medium containing sodium succinate and yeast extract. The spectinomycin and streptomycin resistance plasmid pCG4, originally from Corynebacterium glutamicum T250, could transform various glutamate-producing bacteria such as C. glutamicum, Corynebacterium herculis, Brevibacterium flavum, and Microbacterium ammoniaphilum. The plasmid was structurally unchanged and stably maintained in new hosts. The transformation frequency of most competent protoplasts with pCG4 DNA isolated from primary transformants was high (ca. 10(6) transformants per microgram of covalently closed circular DNA) but was still two orders of magnitude below the frequency of transfection with modified DNA of the bacteriophage phi CGI. The difference was ascribed to the involvement of regeneration in transformation.     

PEG-mediated Transformation of Lentinus edodes

Expression vector p301-bG1 contains a gus gene and a bialaphos resistance gene both driven by glyceraldehydes-3-phosphate dehydrogenase (GPD) gene promoter isolated from Lentinus edodes (Berk.) Sing. Using p301-bG1, PEG-mediated transformation of protoplast of L. edodes was studied. Mixed with PEG-purified plasmid DNA, the protoplasts of L. edodes were treated with PEG solution and cultured on CYM regeneration plate containing 40 μg/mL bialaphos. Bialaphos-resistant and GUS-positive transformants were obtained using this transformation system. Although the transformation efficiency was relatively low, the protocols release large expenses on expensive instrument and restriction enzymes, providing a simple and economical method for mushroom breeding at the molecular level.     

Efficient integrative transformation of the phytopathogenic fungus Alternaria alternata mediated by the repetitive rDNA sequences

An attempt was made to transform Alternaria alternata protoplasts using a plasmid vector, pDH25, bearing the Escherichia coli hygromycin B (Hy) phosphotransferase gene (hph) under the control of the Aspergillus nidulans trpC promoter. Transformants arose on a selective medium containing 100 μg Hy/ml. There were two types of transformants, forming large and small colonies on the selective medium. Transformation with one μg of the vector produced an average of 4.5 large colonies and 600 small ones. In large-colony transformants, the vector often integrated into the recipient chromosome in the form of highly rearranged tandem arrays. To increase transformation efficiency, fragments of the highly repetitive ribosomal RNA gene cluster (rDNA) of A. alternata were used to construct four new vectors for homologous recombination system. Use of these vectors gave higher transformation efficiency than the original plasmid. The best vector, pDH25r1a, gave rise to large-colony transformants at a frequency 20 times higher than pDH25. Transformation events in A. alternata with pDH25r1a occured by homologous recombination as a single crossover between the plasmid-borne rDNA segment and its homologue in the chromosome, often giving rise to tandemly repeated vector DNA.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus.

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient integrative transformation of the phytopathogenic fungus Alternaria alternata mediated by the repetitive rDNA sequences

An attempt was made to transform Alternaria alternata protoplasts using a plasmid vector, pDH25, bearing the Escherichia coli hygromycin B (Hy) phosphotransferase gene (hph) under the control of the Aspergillus nidulans trpC promoter. Transformants arose on a selective medium containing 100 μg Hy/ml. There were two types of transformants, forming large and small colonies on the selective medium. Transformation with one μg of the vector produced an average of 4.5 large colonies and 600 small ones. In large-colony transformants, the vector often integrated into the recipient chromosome in the form of highly rearranged tandem arrays. To increase transformation efficiency, fragments of the highly repetitive ribosomal RNA gene cluster (rDNA) of A. alternata were used to construct four new vectors for homologous recombination system. Use of these vectors gave higher transformation efficiency than the original plasmid. The best vector, pDH25r1a, gave rise to large-colony transformants at a frequency 20 times higher than pDH25. Transformation events in A. alternata with pDH25r1a occured by homologous recombination as a single crossover between the plasmid-borne rDNA segment and its homologue in the chromosome, often giving rise to tandemly repeated vector DNA.     

Establishment of a gene transfer system for Pseudozyma flocculosa, an antagonistic fungus of powdery mildew fungi

A reliable DNA-mediated transformation system has been developed for Pseudozyma flocculosa, a fungus that is antagonistic to powdery-mildew fungi. Plasmids harboring various selectable markers under the control of different promoters were tested. Molecular analyses demonstrated that successful transformation could be achieved using a plasmid that confers resistance to hygromycin B under the control of the Ustilago maydis hsp70 promoter and terminator sequences. On average, 1-40 (mean = 20) transformants were obtained per 10 microg of linearized DNA per 10(8) protoplasts. Southern analysis of the transformants revealed that, in each case, the vector had integrated in multiple tandem copies into the genome of P. flocculosa, and that integration events were random. Pulsed-field gel electrophoresis was employed to separate the genome of P. flocculosa into at least 11 chromosomes with sizes ranging from 0.55 Mb to 2.9 Mb. Hybridization with the plasmid indicated that integration of vector DNA had occurred in one to several chromosomes depending on the transformant examined.     

High frequency transformation of Bacillus subtilis protoplasts by plasmid DNA.

Summary A highly efficient method for transformation of Bacillus subtilis by plasmid DNA is reported. The procedure, which involves polyethylene glycolinduced DNA uptake by protoplasts and subsequent regeneration of the bacterial cell wall, yields up to 80% transformants with an efficiency of 4x10⁷ transformants per g of supercoiled DNA. Plasmids constructed by in vitro ligation or endonuclease-generated fragments of linear plasmid DNA can also transform PEG-treated protoplasts, but at a lower frequency.     

Lactobacillus protoplast transformation

A method for the transformation of Lactobacillus protoplasts by plasmid DNA is reported. The procedure involves polyethylene glycol treatment of protoplasts to induce DNA uptake. A transformation efficiency ranging from 5 to 1000 transformants per microgram of DNA is achieved; the efficiency of protoplast regeneration ranged from 10 to 20%.     

Plasmid transformation of Streptococcus lactis protoplasts: optimization and use in molecular cloning

The parameters affecting polyethylene glycol-induced plasmid transformation of Streptococcus lactis LM0230 protoplasts were examined to increase the transformation frequency. In contrast to spreading protoplasts over the surface of an agar medium, their incorporation into soft agar overlays enhanced regeneration of protoplasts and eliminated variability in transformation frequencies. Polyethylene glycol with a molecular weight of 3,350 at a final concentration of 22.5% yielded optimal transformation. A 20-min polyethylene glycol treatment of protoplasts in the presence of DNA was necessary for maximal transformation. The number of transformants recovered increased as the protoplast and DNA concentration increased over a range of 3.0 X 10(6) to 3.0 X 10(8) protoplasts and 0.25 to 4.0 micrograms of DNA per assay, respectively. With these parameters, transformation was increased to 5 X 10(3) to 4 X 10(4) transformants per microgram of DNA. Linear and recombinant plasmid DNA transformed, but at frequencies 10- to 100-fold lower than that of covalently closed circular DNA. Transformation of recombinant DNA molecules enabled the cloning of restriction endonuclease fragments coding for lactose metabolism into S. lactis LM0230 with the Streptococcus sanguis cloning vector, pGB301. These results demonstrated that the transformation frequency is sufficient to clone plasmid-coded genes which should prove useful for strain improvement of dairy starter cultures.     

Plasmid transformation of Streptococcus lactis protoplasts: optimization and use in molecular cloning.

The parameters affecting polyethylene glycol-induced plasmid transformation of Streptococcus lactis LM0230 protoplasts were examined to increase the transformation frequency. In contrast to spreading protoplasts over the surface of an agar medium, their incorporation into soft agar overlays enhanced regeneration of protoplasts and eliminated variability in transformation frequencies. Polyethylene glycol with a molecular weight of 3,350 at a final concentration of 22.5% yielded optimal transformation. A 20-min polyethylene glycol treatment of protoplasts in the presence of DNA was necessary for maximal transformation. The number of transformants recovered increased as the protoplast and DNA concentration increased over a range of 3.0 X 10(6) to 3.0 X 10(8) protoplasts and 0.25 to 4.0 micrograms of DNA per assay, respectively. With these parameters, transformation was increased to 5 X 10(3) to 4 X 10(4) transformants per microgram of DNA. Linear and recombinant plasmid DNA transformed, but at frequencies 10- to 100-fold lower than that of covalently closed circular DNA. Transformation of recombinant DNA molecules enabled the cloning of restriction endonuclease fragments coding for lactose metabolism into S. lactis LM0230 with the Streptococcus sanguis cloning vector, pGB301. These results demonstrated that the transformation frequency is sufficient to clone plasmid-coded genes which should prove useful for strain improvement of dairy starter cultures.     

A comparison of the phenotypic and genetic stability of recombinant Trichoderma spp. generated by protoplast- and Agrobacterium-mediated transformation

Four different Trichoderma strains, T. harzianum CECT 2413, T. asperellum T53, T. atroviride T11 and T. longibrachiatum T52, which represent three of the four sections contained in this genus, were transformed by two different techniques: a protocol based on the isolation of protoplasts and a protocol based on Agrobacterium-mediated transformation. Both methods were set up using hygromycin B or phleomycin resistance as the selection markers. Using these techniques, we obtained phenotypically stable transformants of these four different strains. The highest transformation efficiencies were obtained with the T. longibrachiatum T52 strain: 65-70 transformants/microg DNA when transformed with the plasmid pAN7-1 (hygromycin B resistance) and 280 transformants/107 spores when the Agrobacterium-mediated transformation was performed with the plasmid pUR5750 (hygromycin B resistance). Overall, the genetic analysis of the transformants showed that some of the strains integrated and maintained the transforming DNA in their genome throughout the entire transformation and selection process. In other cases, the integrated DNA was lost.     

Transformation and transposon mutagenesis of Leifsonia xyli subsp. xyli, causal organism of ratoon stunting disease of sugarcane

Conditions have been developed for genetic transformation and insertional mutagenesis in Leifsonia xyli subsp. xyli (Lxx), the causal organism of ratoon stunting disease (RSD), one of the most damaging and intractable diseases of sugarcane internationally. Transformation frequencies ranged from 1 to 10 colony forming units (CFU)/microg of plasmid DNA using Clavibacter/Escherichia coli shuttle vectors pCG188, pDM302, and pDM306 and ranged from 50 to 500 CFU/microg using cosmid cloning vectors pLAFR3 and pLAFR5-km. The transformation/transposition frequency was 0 to 70 CFU/microg of DNA, using suicide vectors pUCD623 and pSUP2021 containing transposable elements Tn4431 and Tn5, respectively. It was necessary to grow Lxx in media containing 0.1% glycine for electroporation and to amplify large plasmids in a dam-/dcm- E. coli strain and purify the DNA by anion exchange. To keep selection pressure at an optimum, the transformants were grown on nitrocellulose filters (0.2-microm pore size) on media containing the appropriate antibiotics. Transposon Tn4431 containing a promoterless lux operon from Vibrio fischeri and a tetracycline-resistance gene was introduced on the suicide vector pUCD623. All but 1% of the putative transposon mutants produce light, indicating transposition into functional Lxx genes. Southern blot analysis of these transformants indicates predominantly single transposon insertions at unique sites. The cosmid cloning vector pLAFR5-km was stably maintained in Lxx. The development of a transformation and transposon mutagenesis system opens the way for molecular analysis of pathogenicity determinants in Lxx.     

Relationship of vector insert size to homologous integration during transformation of Neurospora crassa with the cloned am (GDH) gene

Summary We used lambda and plasmid vectors containing the am ⁺ gene in an insert of from 2.7 to 9.1 kb, to transform am point mutant and deletion strains. A total of 199 transformants were examined with the potential to yield am ^– transformants by homologous recombination. When we used vectors that had 9.1 kb of homology with the chromosomal DNA, 30% of the transformants obtained were the result of homologous recombination regardless of whether the vector was a lambda molecule, a circular plasmid, or a plasmid that had been linearized prior to transformation. When vectors with up to 5.1 kb of homology were used, very few transformants (1 of 89 tested) resulted from homologous recombination. Of a sample of 29 ectopic integration events obtained by transformation with the 9.1 kb fragment cloned in a vector, 18 included a major part (usually almost all) of both arms of lambda with the entire Neurospora 9.1 kb insert between them. Four included only long arm sequence together with an adjacent segment of the insert containing the am gene. The remaining seven were the result of multiple integrations. There was no evidence of circularization of the vector prior to integration. All transformants that had multiple copies of the am gene appeared to be subject to the RIP process, which causes multiple mutations in duplicated sequences during the sexual cycle.     

Transformation ofSchizophyllum commune: An analysis of specific properties

Several properties of transformation in the basidiomycete,Schizophyllum commune, were examined. The transformation efficiency of protoplasts made from germinating basidiospores is dependent upon the length of time that the spores are incubated under conditions that promote germination. Protoplasts prepared from ungerminated spores transform at least 10 times more efficiently than protoplasts prepared from germlings (25 μm in length) or from mycelium. Transformation frequencies of 1000 transformants/μg of control plasmid DNA and 10⁷ protoplasts are sufficient for obtaining transformants with 2 × 10⁷ protoplasts and 10 μg of bank DNA from a genomic plasmid library. The probability of cotransforming with two plasmids is dependent on the DNA concentrations of each; concentrations can be adjusted to yield nearly 100% cotrasformants. The presence of a nonselected plasmid in the reaction mix improves the transformation frequency of a selected marker carried on another plasmid; this is not true if linear fragments ofSchizophyllum genomic DNA are used as the nonselected DNA. Transformation of aSchizophyllum protoplast does not require its fusion to another protoplast.