Enzymatic hydrolysis of racemic ibuprofen esters using Rhizomucor miehei lipase immobilized on different supports

This research describes the immobilization of Rhizomucor miehei lipase (RML) and chemically aminated RML (NH₂-RML) on different supports including octyl-sepharose (octyl-RML), activated sepharose with cyanogen bromide (CNBr-RML and CNBr-NH₂-RML), glyoxyl sepharose (Gx-RML and Gx-NH₂-RML) and glyoxyl sepharose dithiothreitol (Gx-DTT-RML and Gx-DTT-NH₂-RML). The highest immobilization yield was achieved for octyl-RML (>98%) followed by CNBr-RML (88%). Octyl-RML had the most specific activity (13.6) among all derivatives. The other preparations had moderate activities likely because of chemical reaction during covalent attachment of the enzyme. The catalytic behavior of lipase immobilized in hydrolysis reactions was investigated using methyl, ethyl, propyl, butyl and isobutyl-ibuprofen esters and the influence of the alkyl chain and the alcoholic residue of the ester were studied. Butyl ester was the most interesting ester for carrying out hydrolysis. The highest enantioselectivity of enzyme (E = 8.8) was obtained with isooctane/sodium phosphate buffer pH 7.0 at temperature of 40 °C. Increasing temperature from 40 to 50 °C caused decreasing in enantioselectivities and conversions. Also esterification of ibuprofen was carried out in solvent systems containing isooctane and two ionic liquids (ILs); [BMIM][PF₆] and [BMIM][BF₄]. Poor conversions and enantioselectivities were observed during esterification in all solvents.     

A two steps enzymatic procedure to obtain sterol esters,tocopherols and fatty acid ethyl esters from soybean oil deodorizer distillate

Soybean oil deodorizer distillate (SODD) was enzymatically modified to obtain a product mixture comprised mainly of sterol esters, tocopherols, and fatty acid ethyl esters. Firstly, the original SODD was mixed with oleic acid to reduce its melting point from 65–70 to 30–35 °C and also to produce a reaction mixture with a ratio of free fatty acids (FFA) to sterols close to 2 to improve the progress of sterols esterification. Two enzymatic steps were used in order to separate sterols esterification and ethyl esterification in time and space. The first enzymatic step (in the presence of Candida rugosa lipase) allowed to efficiently transform more than 90% of the original sterols in a short period of time (5 h). The second enzymatic step (in the presence of Novozym 435) converted more than 95% of the FFA in less than 3 h. In addition, the stability of both biocatalysts has been evaluated and both bioprocesses have been scaled-up reutilizing the same batch of lipase up to 8 and 3 times for the first and the second enzymatic step, respectively. The final product obtained is intended to be used as starting material for the purification of sterol esters, tocopherols, and fatty acid ethyl esters via supercritical fluid extraction.     

Lysis of Bacillus subtilis Cells by Glycerol and Sucrose Esters of Fatty Acids

The lytic action of glycerol and sucrose esters of fatty acids with different carbon chain lengths on the exponentially growing cells of Bacillus subtilis 168 was investigated. Of each series of esters, glycerol dodecanoate and sucrose hexadecanoate were the most active. Lysis at 1 h after the addition of 0.1 mM glycerol dodecanoate or 20 μg of sucrose hexadecanoate per ml was 81 or 79%, respectively, as evaluated by the reduction in optical density. During this treatment a great loss of viability occurred that preceded lysis. The results that were obtained suggest that autolysis is induced by these esters. The esters caused morphological changes in the cells, but a seeming adaptation of the cells to esters was seen.     

Enzymatic synthesis of palm-based ascorbyl esters

The synthesis of palm-based ascorbyl esters through transesterification of ascorbic acid and palm oil in tert-amyl alcohol catalyzed by immobilized lipase is described. Highest conversion (70–75%) was determined after 16 h reaction at 40 °C using lipase (Novozyme 435 from Candida antartica) with an ascorbic acid to palm oil mole ratio of 1:8. The purified product was further characterized by ¹³C NMR and GC–MS and the mixture of ascorbyl monoesters obtained were identified as ascorbyl monooleate (61%), ascorbyl monopalmitate (30%) and ascorbyl monostearate (9%). The antioxidant activity of palm-based ascorbyl esters was evaluated by 1,1-diphenyl-2-picrylhydrazyl (DPPH) test. The results showed that pure palm-based ascorbyl esters have an antioxidant activity with an IC₅₀ value of 0.1 mg/mL.     

4-Methylumbelliferyl esters as fluorogenic substrates for proteases

4-Methylumbelliferyl esters of amino acid derivatives have been synthesized using the carbodiimide, disulphite and carbonate methods. Of these, the first was shown capable of preparing 2-naphthyl and 4-methylumbelliferyl esters of benzoylglycine, benzyloxycarbonyl glycine and benzyloxycarbonyl-citrulline but not of benzoyl-N^G-nitroarginine. 2-Naphthyl benzoyl-N^G-nitroargininate was prepared successfully using di(2-naphthyl)sulphite. Bis(4-methylumbelliferyl)sulphite could not be prepared but 4-methylumbelliferyl benzoyl-N^G-nitroargininate was obtained by the use of an equilibrium method using diphenyl sulphite in the presence of 4-methylumbelliferone. A new reagent, phenyl 4-methylumbelliferyl carbonate, was synthesized and used for the preparation of the 4-methylumbelliferyl esters of benzoylglycine, benzyloxycarbonylglycine and benzoyl-N^G-nitroarginine. The 4-methylumbelliferyl esters of benzyloxycarbonylglycine and benzyloxycarbonylcitrulline were shown to be good substrates for the assay of proteases, including chymotrypsin (EC 3.4.21.1) and trypsin (EC 3.4.21.4). Disadvantages of 4-methylumbelliferyl esters are discussed.     

Combination of two lipases more efficiently catalyzes methanolysis of soybean oil for biodiesel production in aqueous medium

A combination of two lipases was employed to catalyze methanolysis of soybean oil in aqueous medium for biodiesel production. The two lipase genes were cloned from fungal strains Rhizomucor miehei and Penicillium cyclopium, and each expressed successfully in Pichia pastoris. Activities of the 1,3-specific lipase from R. miehei (termed RML) and the non-specific mono- and diacylglycerol lipase from P. cyclopium (termed MDL) were 550 U and 1545 U per ml respectively, and enzymatic properties of these supernatant of fermentation broth (liquid lipase) were stable at 4 °C for >3 months. Under optimized conditions, the ratio of biodiesel conversion after 12 h at 30 °C, using RML alone, was 68.5%. When RML was assisted by addition of MDL, biodiesel conversion ratio was increased to >95% under the same reaction conditions. The results suggested that combination of lipases with different specificity, for enzymatic conversion of more complex lipid substrates, is a potentially useful strategy for biodiesel production.     

Kinetically Controlled Peptide Synthesis Mediated by Papain Using the Carbamoylmethyl Ester as an Acyl Donor

A series of dipeptides were synthesized generally in good yields with carbamoylmethyl (Cam) esters as acyl donors in the presence of a cysteine protease, papain, immobilized on Celite. Several segment condensations were also achieved generally in high yields without danger of racemization and formation of the secondary-hydrolysis product. Moreover, partial sequences of some bioactive peptides were prepared through segment condensations, and aimed-at peptides were obtained generally in high yields without the racemization of C-terminal residues of the carboxyl components. Thus, the superiority of the Cam ester in the kinetically controlled peptide synthesis was once again ascertained in couplings mediated by the cysteine protease as in those catalyzed by the serine proteases reported earlier.     

Development of a method to investigate the hydrolysis of xenobiotic esters by a Mycobacterium smegmatis homogenate

One of the main problems in combating tuberculosis is caused by a poor penetration of drugs into the mycobacterial cells. A prodrug approach via activation inside mycobacterial cells is a possible strategy to overcome this hurdle and achieve efficient drug uptake. Esters are attractive candidates for such a strategy and we and others communicated previously the activity of esters of weak organic acids against mycobacteria. However very little is known about ester hydrolysis by mycobacteria and no biological model is available to study the activation of prodrugs by these microorganisms. To begin filling this gap, we have embarked in a project to develop an in vitro method to study prodrug activation by mycobacteria using Mycobacterium smegmatis homogenates. Model ester substrates were ethyl nicotinate and ethyl benzoate whose hydrolysis was monitored and characterized kinetically. Our studies showed that in M. smegmatis most esterase activity is associated with the soluble fraction (cytosol) and is preserved by storage at 5 °C or at room temperature for one hour, or by storage at − 80 °C up to one year. In the range of homogenate concentrations studied (5-80% in buffer), k_obs varied linearly with homogenate concentration for both substrates. We also found that the homogenates showed Michaelis-Menten kinetics behavior with both prodrugs. Since ethyl benzoate is a good substrate for the mycobacterial esterases, this compound can be used to standardize the esterasic activity of homogenates, allowing results of incubations of prodrugs with homogenates from different batches to be readily compared.     

The incorporation of glycerol and lysine into the lipid fraction of Staphylococcus aureus

1. Incubation of washed cells of Staphylococcus aureus with [1-¹⁴C]glycerol results in the incorporation of glycerol into the lipid fraction of the cells. The rate of incorporation is increased by the presence of glucose and amino acids. The presence of amino acids increases incorporation into the fraction containing O-amino acid esters of phosphatidylglycerol. 2. Glycerol, incorporated into washed cells by incubation with glycerol, glucose and amino acids, is rapidly released from the lipid fraction when cells are incubated at low suspension densities in buffer. 3. Of nine amino acids tested, only lysine is significantly incorporated into the lipid fraction. The incorporation is increased by the presence of glycerol, glucose and other amino acids, especially aspartate and glutamate. 4. The incorporation of lysine is increased by the addition of puromycin at concentrations that inhibit protein synthesis. Chloramphenicol does not increase the incorporation of lysine but abolishes the enhancing effect of puromycin. 5. The enhancing effect of puromycin is accompanied by a similar increase in the incorporation of lysine into the fraction soluble in hot trichloroacetic acid. 6. Lysine is incorporated into the lipid fraction that contains O-amino acid esters of phosphatidylglycerol and corresponds in properties to phosphatidylglyceryl-lysine. 7. Lysine is rapidly released from the lipid of cells incubated in buffer only at low suspension densities. 8. Incubation of cells with the phosphatidylglyceryl-lysine fraction does not lead to the appearance of free lysine or to incorporation into the fraction insoluble in hot trichloroacetic acid.     

Analysis of microquantities of choline and its esters utilizing gas chromatography-chemical ionization mass spectrometry.

Gas chromatography-chemical ionization mass spectrometry has been applied successfully in the analysis of choline and its esters. This approach serves to extend further the potential of existing gas chromatographic procedures which are capable of the microestimation of choline esters following their N-demethylation by either chemical or physical means. Typical fragmentation patterns with ions at $\text{m}\text{e}\text{= 72}$ and $\text{m}\text{e}\text{= (M + 1)}$ were obtained for each choline ester derivative. When methane was used as the reactant gas, the above fragments were approximately of equal abundance for each ester. Use of isobutane as reactant gas yielded almost 80% of the (M + 1) fragment, and only approximately 5% of the fragment ion at $\text{m}\text{e}\text{= 72}$. Recovery of all fragments was linear for nondeuterated as well as deuterated analogs of choline ester derivatives. Recovery, as evident from the analysis of records of relative ratios of injected isotopic variants of these esters, indicated that this analysis of choline esters using chemical ionization mass spectrometry coupled with gas chromatography is quantitative and highly reproducible.     

Enzymatic synthesis of ethyl esters from waste oil using mixtures of lipases in a plug‐flow packed‐bed continuous reactor

This work describes the continuous synthesis of ethyl esters via enzymatic catalysis on a packed‐bed continuous reactor, using mixtures of immobilized lipases (combi‐lipases) of Candida antarctica (CALB), Thermomyces lanuginosus (TLL), and Rhizomucor miehei (RML). The influence of the addition of glass beads to the reactor bed, evaluation of the use of different solvents, and flow rate on reaction conditions was studied. All experiments were conducted using the best combination of lipases according to the fatty acid composition of the waste oil (combi‐lipase composition: 40% of TLL, 35% of CALB, and 25% of RML) and soybean oil (combi‐lipase composition: 22.5% of TLL, 50% of CALB, and 27.5% of RML). The best general reaction conditions were found to be using tert‐butanol as solvent, and the flow rate of 0.08 mL min^?1. The combi‐lipase reactors operating at steady state for over 30 days (720 h), kept conversion yields of ～50%, with average productivity of 1.94 g_{ethyl esters} h^?1, regardless of the type of oil in use. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:952–959, 2018     

Preparation and physical properties of chitin fatty acids esters

Trifluoroacetic anhydride is an effective promoter for the preparation of chitin single- and mixed-acid esters. Complete dissolution is achieved within 30 min when powdered chitin is heated at 70 °C in a mixed solution of carboxylic acid(s) and trifluoroacetic anhydride. Chitin esters prepared are chitin acetate, chitin butyrate, chitin hexanoate and chitin octanoate, chitin co-acetate/butyrate, chitin co-acetate/hexanoate, chitin co-acetate/octanoate, chitin co-acetate/palmitate, each from a solution of the respective reactants. The products have degrees of O-acyl substitution in a range of DS 1-2 depending on the nature of acyl group, as analyzed by gas-liquid and high-pressure liquid chromatography. Acetic acid as a mutual component for the mixed-acid esters increases the total degree of substitution, and the acetyl substitution is close to the relative distribution in the reaction mixture for chitin co-acetate/butyrate. It is favored over hexanoate, octanoate, and palmitate. The parent molecules, as calculated by the composition of the chitin esters and their molecular weights by light-scattering spectroscopy, are 30 kDa for the smallest and 150-151 kDa for the largest. Films of these chitin derivatives when cast from solution are strong and flexible with limited extensibility. By dynamic mechanical analysis of the ester film, it was found that both the glass transition temperature (T_g) and the tensile modulus (E′ at 25 °C) are highest for chitin acetate (218 °C and 5.8 GPa), and lowest for chitin octanoate (182 °C and 1.5 GPa). For the other esters, these values lie between the above-cited values, where the T_g and the E′ decrease with an increase in the chain length of the acyl constituent.     

Degradation of phorbol esters by Pseudomonas aeruginosa PseA during solid-state fermentation of deoiled Jatropha curcas seed cake

Large amount of seed cake is generated as by-product during biodiesel production from Jatropha seeds. Presence of toxic phorbol esters restricts its utilization as livestock feed. Safe disposal or meaningful utilization of this major by-product necessitates the degradation of these phorbol esters. The present study describes the complete degradation of phorbol esters by Pseudomonas aeruginosa PseA strain during solid state fermentation (SSF) of deoiled Jatropha curcas seed cake. Phorbol esters were completely degraded in nine days under the optimized SSF conditions viz. deoiled cake 5.0 g; moistened with 5.0 ml distilled water; inoculum 1.5 ml of overnight grown P. aeruginosa; incubation at temperature 30 °C, pH 7.0 and RH 65%.SSF of deoiled cake seems a potentially viable approach towards the complete degradation of the toxic phorbol esters.     

Growth inhibitory properties of lactose fatty acid esters

Sugar esters are biodegradable, nonionic surfactants which have microbial inhibitory properties. The influence of the fatty acid chain length on the microbial inhibitory properties of lactose esters was investigated in this study. Specifically, lactose monooctanoate (LMO), lactose monodecanoate (LMD), lactose monolaurate (LML) and lactose monomyristate (LMM) were synthesized and dissolved in both dimethyl sulfoxide (DMSO) and ethanol. Minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) were determined in growth media. LML was the most effective ester, exhibiting MIC values of <0.05 to <5 mg/ml for each Gram-positive bacteria tested (Bacillus cereus, Mycobacterium KMS, Streptococcus suis, Listeria monocytogenes, Enterococcus faecalis, and Streptococcus mutans) and MBC values of <3 to <5 mg/ml for B. cereus, M. KMS, S. suis, and L. monocytogenes. LMD showed MIC and MBC values of <1 to <5 mg/ml for B. cereus, M. KMS, S. suis, L. monocytogenes, and E. faecalis, with greater inhibition when dissolved in ethanol. LMM showed MIC and MBC values of <1 to <5 mg/ml for B. cereus, M. KMS, and S. suis. LMO was the least effective showing a MBC value of <5 mg/ml for only B. cereus, though MIC values for S. suis and L. monocytogenes were observed when dissolved in DMSO. B. cereus and S. suis were the most susceptible to the lactose esters tested, while S. mutans and E. faecalis were the most resilient and no esters were effective on Escherichia coli O157:H7. This research showed that lactose esters esterified with decanoic and lauric acids exhibited greater microbial inhibitory properties than lactose esters of octanoate and myristate against Gram-positive bacteria.     

High yield lipase-catalyzed synthesis of Engkabang fat esters for the cosmetic industry

Engkabang fat esters were produced via alcoholysis reaction between Engkabang fat and oleyl alcohol, catalyzed by Lipozyme RM IM. The reaction was carried out in a 500 ml Stirred tank reactor using heptane and hexane as solvents. Response surface methodology (RSM) based on a four-factor-five-level Central composite design (CCD) was applied to evaluate the effects of synthesis parameters, namely temperature, substrate molar ratio (oleyl alcohol: Engkabang fat), enzyme amount and impeller speed. The optimum yields of 96.2% and 91.4% were obtained for heptane and hexane at the optimum temperature of 53.9 °C, impeller speeds of 309.5 and 309.0 rpm, enzyme amounts of 4.82 and 5.65 g and substrate molar ratios of 2.94 and 3.39:1, respectively. The actual yields obtained compared well with the predicted values of 100.0% and 91.5%, respectively. Meanwhile, the properties of the esters show that they are suitable to be used as ingredient for cosmetic applications.     

Transesterification of alkylphosphate esters by phospolipase D

Phospholipase D from cabbage or Streptomyces chromofuscus catalyses the transesterification of alkylphosphate esters, which are potent antitumor agents. The exchange of choline in octadecylphosphosphocholine by N-(2-hydroxy-ethyl)-N-methylpiperidine with phospholipase D from cabbage is kinetically controlled and amounts to maximum 60% in buffer, 43% in buffer/n-hexane, and 82% in buffer/n-hexane/1-octanol.     

Synthesis of chiral N-protected amino acid esters by the use of UNCAs

Summary An easy synthesis of N-protected amino acid esters, including tert-butyl esters, is described by the use of urethane N-protected carboxyanhydrides (UNCAs). Treating UNCAs with tert-butanol in the presence of potassium bicarbonate at 45°C yielded the corresponding N-protected amino acid tert-butyl esters in a very simple way. Benzyloxycarbonyl and tert-butyloxycarbonyl N-protected amino acid tert-butyl esters have been obtained by this procedure. Once more, this reaction showed the great reactivity of UNCAs.     

Improvement of activity and stability of Rhizomucor miehei lipase by immobilization on nanoporous aluminium oxide and potassium sulfate microcrystals and their applications in the synthesis of aroma esters

In this study, Rhizomucor miehei lipase (RML) was immobilized on the hexagonally-ordered nanoporous aluminium oxide membranes (RML-Al₂O₃-NP) by adsorption and as protein-coated microcrystals (RML-PCMCs) by simultaneously precipitating RML on micron-sized potassium sulfate crystals (K₂SO₄) in pre-chilled acetone. The hydrolytic activities of immobilized lipase preparations were investigated in terms of p-nitrophenyl palmitate hydrolysis and their esterification activities were examined for the synthesis of some aroma esters such as butyl acetate, isoamyl acetate, hexyl acetate, heptyl acetate, and geranyl acetate. The immobilization yields were 33.8 and 25.1%, respectively for RML immobilized on Al₂O₃-NP membranes and potassium sulfate crystals. The catalytic efficiency ratios of RML-Al₂O₃-NP and RML-PCMCs were 2.3- and 3.9-fold higher than that of the free lipase, respectively in terms of hydrolytic activity. The free lipase was stabilized as 4.1- and 10.5-fold, respectively at 40 and 50?°C when immobilized on Al₂O₃-NP. The corresponding stabilization factors were 4.6- and 12.8-fold higher for RML-PCMCs. RML-Al₂O₃-NP and RML-PCMCs maintained 84 and 86% of their initial hydrolytic activities, respectively after 10 reuses. Of the synthesized aroma esters, the highest yield was obtained for the geranyl acetate. After 4?h reaction time, no geraniol was detected in the preparative-scale (196?g/L) synthesis of geranyl acetate for both the immobilized lipases when the initial geraniol amount, vinyl acetate amount, RML-PCMCs amount, and reaction temperature values were 1?mmol, 3?mmol, 100?mg (or 300?mg RML-Al₂O₃-NP), and 50?°C, respectively. These results show that the immobilization of R. miehei lipase by adsorption on nanoporous aluminium oxide and as protein-coated microcrystals leads to the obtention of highly stable, catalytically more active, and reusable lipase preparations.     

Microbial synthesis of wax esters

Microbial synthesis of wax esters (WE) from low-cost renewable and sustainable feedstocks is a promising path to achieve cost-effectiveness in biomanufacturing. WE are industrially high-value molecules, which are widely used for applications in chemical, pharmaceutical, and food industries. Since the natural WE resources are limited, the WE production mostly rely on chemical synthesis from rather expensive starting materials, and therefore solution are sought from development of efficient microbial cell factories. Here we report to engineer the yeast Yarrowia lipolytica and bacterium Escherichia coli to produce WE at the highest level up to date. First, the key genes encoding fatty acyl-CoA reductases and wax ester synthase from different sources were investigated, and the expression system for two different Y. lipolytica hosts were compared and optimized for enhanced WE production and the strain stability. To improve the metabolic pathway efficiency, different carbon sources including glucose, free fatty acid, soybean oil, and waste cooking oil (WCO) were compared, and the corresponding pathway engineering strategies were optimized. It was found that using a lipid substrate such as WCO to replace glucose led to a 60-fold increase in WE production. The engineered yeast was able to produce 7.6 g/L WE with a yield of 0.31 (g/g) from WCO within 120 h and the produced WE contributed to 57% of the yeast DCW. After that, E. coli BL21(DE3), with a faster growth rate than the yeast, was engineered to significantly improve the WE production rate. Optimization of the expression system and the substrate feeding strategies led to production of 3.7–4.0 g/L WE within 40 h in a 1-L bioreactor. The predominant intracellular WE produced by both Y. lipolytica and E. coli in the presence of hydrophobic substrates as sole carbon sources were C₃₆, C₃₄ and C₃₂, in an order of decreasing abundance and with a large proportion being unsaturated. This work paved the way for the biomanufacturing of WE at a large scale.     

Promotion of multipoint covalent immobilization through different regions of genetically modified penicillin G acylase from E. coli

A novel approach is proposed to prepare a set of immobilized derivatives of a enzyme covalently rigidified through different regions of its surface. Six different variants of penicillin G acylase (PGA) from Escherichia coli (which lacks Cys) were prepared by introducing a unique Cys residue via site-directed mutagenesis in six different enzyme regions which were rich in Lys residues. All variants exhibited a similar activity and stability compared to those of the native enzyme. Each variant was immobilized on supports having a low concentration of reactive disulfide moieties and a high concentration of poorly reactive epoxy groups. After immobilization at pH 7.0 by site-directed thiol-disulfide intermolecular exchange, derivatives were further incubated at pH 10.0 for 48 h to promote an additional intramolecular reaction between Lys residues of enzyme and epoxy groups of the support. The establishment of at least three covalent attachments per PGA molecule was determined for all immobilized enzyme variants. The different derivatives exhibited diverse stability against several distorting agents and different selectivity in two interesting reactions. The derivative of the PGA variant obtained by replacement of GlnB380 by Cys was the most stable against heat and organic cosolvents: it preserved 90% of the initial activity and was 30-fold more stable than soluble PGA. This derivative also exhibited an improved enantioselectivity in the hydrolysis of chiral esters (E was improved from 8 to 16) and in kinetically controlled synthesis of amides (synthetic yields were increased from 31 to 49%).