Reductive dioxygen scavenging by flavo-diiron proteins of Clostridium acetobutylicum

Two flavo-diiron proteins (FDPs), FprA1 and FprA2, are up-regulated when the strictly anaerobic solvent producer, Clostridium acetobutylicum, is exposed to dioxygen. These two FDPs were purified following heterologous overexpression in Escherichia coli as N-terminal Strep-tag fusion proteins. The recombinant FprA1 and FprA2 were found to be homodimeric and homotetrameric, respectively, and both FDPs functioned as terminal components of NADH oxidases (NADH:O₂ oxidoreductases) when using C. acetobutylicum NADH:rubredoxin oxidoreductase (NROR) and rubredoxin (Rd) as electron transport intermediaries. Both FDPs catalyzed the four-electron reduction of molecular oxygen to water with similar specific activities. The results are consistent with these FDPs functioning as efficient scavengers of intracellular dioxygen under aerobic or microoxic growth conditions.     

Structural insights into substrate specificity of crotonase from the n-butanol producing bacterium Clostridium acetobutylicum

Crotonase from Clostridium acetobutylicum (CaCRT) is an enzyme that catalyzes the dehydration of 3-hydroxybutyryl-CoA to crotonyl-CoA in the n-butanol biosynthetic pathway. To investigate the molecular mechanism underlying n-butanol biosynthesis, we determined the crystal structures of the CaCRT protein in apo- and acetoacetyl-CoA bound forms. Similar to other canonical crotonase enzymes, CaCRT forms a hexamer by the dimerization of two trimers. A crystal structure of CaCRT in complex with acetoacetyl-CoA revealed that Ser69 and Ala24 to be signature residues of CaCRT, which results in a distinct ADP binding mode wherein the ADP moiety is bound at a different position compared with other crotonases. We also revealed that the substrate specificity of crotonase enzymes is determined by both the structural feature of the α3 helix region and the residues contributing the enoyl-CoA binding pocket. A tight formed α3 helix and two phenylalanine residues, Phe143 and Phe233, aid CaCRT to accommodate crotonyl-CoA as the substrate. The key residues involved in substrate binding, enzyme catalysis and substrate specificity were confirmed by site-directed mutagenesis.     

The utility of Shewanella japonica for microbial fuel cells

Shewanella-containing microbial fuel cells (MFCs) typically use the fresh water wild-type strain Shewanella oneidensis MR-1 due to its metabolic diversity and facultative oxidant tolerance. However, S. oneidensis MR-1 is not capable of metabolizing polysaccharides for extracellular electron transfer. The applicability of Shewanella japonica (an agar-lytic Shewanella strain) for power applications was analyzed using a diverse array of carbon sources for current generation from MFCs, cellular physiological responses at an electrode surface, biofilm formation, and the presence of soluble extracellular mediators for electron transfer to carbon electrodes. Critically, air-exposed S. japonica utilizes biosynthesized extracellular mediators for electron transfer to carbon electrodes with sucrose as the sole carbon source.     

The [FeFe]-hydrogenase maturase HydF from Clostridium acetobutylicum contains a CO and CN ligated iron cofactor

Biosynthesis of the [FeFe] hydrogenases active site (H-cluster) requires three maturation factors whose respective roles are not understood yet. The clostridial maturation enzymes (CaHydE, CaHydF and CaHydG) were homologously overexpressed in their native host Clostridium acetobutylicum. CaHydF was able to activate Chlamydomonas reinhardtii [FeFe] hydrogenase apoprotein (CrHydA1_apo) to almost 100% compared to the native specific hydrogen evolution activity. Based on electron paramagnetic resonance spectroscopy and Fourier-transform infrared spectroscopy data the existence of a [4Fe4S] cluster and a CO and CN⁻ ligand coordinated di-iron cluster is suggested. This study contains the first experimental evidence that the bi-nuclear part of the H-cluster is assembled in HydF.     

Glycerol degradation in single-chamber microbial fuel cells

Glycerol degradation with electricity production by a pure culture of Bacillus subtilis in a single-chamber air cathode of microbial fuel cell (MFC) has been demonstrated. Steady state polarization curves indicated a maximum power density of 0.06 mW/cm² with an optimal external resistance of 390Ω. Analysis of the effect of pH on MFC performance demonstrated that electricity generation was sustained over a long period of time under neutral to alkaline conditions. Cyclic voltammetry exhibited the increasing electrochemical activity with the increase of pH of 7, 8 and 9. Voltammetric studies also demonstrated that a two-electron transfer mechanism was occurring in the reactor. The low Coulombic efficiency of 23.08% could be attributed to the loss of electrons for various activities other than electricity generation. This study describes an application of glycerol that could contribute to transformation of the biodiesel industry to a more environmentally friendly microbial fuel cell-based technology.     

丙酮丁醇梭菌的基因编辑工具及代谢工程改造

丙酮丁醇梭菌作为极具潜力的新型生物燃料丁醇的生产菌,受到各国研究学者的广泛关注。通过丙酮丁醇梭菌(ABE)发酵生产丁醇,由于生产成本高,限制了其工业化应用。随着基因组学和分子生物学的快速发展,适用于丙酮丁醇的基因编辑工具不断发展并应用于提高菌株的发酵性能。本文对丙酮丁醇梭菌基因编辑工具和代谢工程改造取得的进展进行综述。     

Development of Enterobacter aerogenes fuel cells: From in situ biohydrogen oxidization to direct electroactive biofilm

This study described an Enterobacter aerogenes-catalyzed microbial fuel cell (MFC) with a carbon-based anode that exhibited a maximum power density of 2.51 W/m³ in the absence of artificial electron mediators. The MFC was started up rapidly, within hours, and the current generation in the early stage was demonstrated to result from in situ oxidation of biohydrogen produced by E. aerogenes during glucose fermentation. Over periodic replacement of substrate, both planktonic biomass in the culture liquid and hydrogen productivity decreased, while increased power density and coulombic efficiency and decreased internal resistance were unexpectedly observed. Using scanning electron microscopy and cyclic voltammetry, it was found that the enhanced MFC performance was associated with the development of electroactive biofilm on the anodic surface, proposed to involve an acclimation and selection process of E. aerogenes cells under electrochemical tension. The significant advantage of rapid start-up and the ability to develop an electroactive biofilm identifies E. aerogenes as a suitable biocatalyst for MFC applications.     

丙酮丁醇梭菌硫氧还蛋白系统在溶剂生产过程中的功能

[目的]探究丙酮丁醇梭菌硫氧还蛋白系统在生长和代谢过程中的功能.[方法]使用ClosTron系统对硫氧还蛋白系统中的硫氧还蛋白还原酶基因(trxB)进行插入失活,得到突变株,通过Southern杂交方法验证插入内含子的拷贝数;在基本培养基中进行分批发酵,比较并分析突变株的生长特点;通过pH控制,利用限磷的连续发酵方法使...     

Application of biocathode in microbial fuel cells: cell performance and microbial community

Instead of the utilization of artificial redox mediators or other catalysts, a biocathode has been applied in a two-chamber microbial fuel cell in this study, and the cell performance and microbial community were analyzed. After a 2-month startup, the microorganisms of each compartment in microbial fuel cell were well developed, and the output of microbial fuel cell increased and became stable gradually, in terms of electricity generation. At 20 ml/min flow rate of the cathodic influent, the maximum power density reached 19.53 W/m3, while the corresponding current and cell voltage were 15.36 mA and 223 mV at an external resistor of 14.9 Omega, respectively. With the development of microorganisms in both compartments, the internal resistance decreased from initial 40.2 to 14.0 Omega, too. Microbial community analysis demonstrated that five major groups of the clones were categorized among those 26 clone types derived from the cathode microorganisms. Betaproteobacteria was the most abundant division with 50.0% (37 of 74) of the sequenced clones in the cathode compartment, followed by 21.6% (16 of 74) Bacteroidetes, 9.5% (7 of 74) Alphaproteobacteria, 8.1% (6 of 74) Chlorobi, 4.1% (3 of 74) Deltaproteobacteria, 4.1% (3 of 74) Actinobacteria, and 2.6% (2 of 74) Gammaproteobacteria.     

Improvement of xylose utilization in Clostridium acetobutylicum via expression of the talA gene encoding transaldolase from Escherichia coli

Clostridium acetobutylicum ATCC 824 was metabolically engineered for improved xylose utilization. The gene talA, which encodes transaldolase from Escherichia coli K-12, was cloned and overexpressed in C. acetobutylicum ATCC 824. Compared with C. acetobutylicum ATCC 824 (824-WT), the transformant bearing the E. coli talA gene (824-TAL) showed improved ability on xylose utilization and solvents production using xylose as the sole carbon source. During the fermentation of xylose and glucose mixtures with three xylose/glucose ratios (approximately 1:2, 1:1 and 2:1), the rate of xylose consumption and final solvents titers of 824-TAL were all higher than those of 824-WT, despite glucose repression on xylose uptake still existing. These results suggest that the insufficiency of transaldolase in the pentose phosphate pathway (PPP) of C. acetobutylicum is one of the bottlenecks for xylose metabolism and therefore, overexpressing the gene encoding transaldolase is able to improve xylose utilization and solvent production.     

Treatment of wastewater from Dioscorea zingiberensis tubers used for producing steroid hormones in a microbial fuel cell

A two-chamber microbial fuel cell (MFC) was used to treat Dioscorea zingiberensis processing wastewater and generate electricity. The contaminant degradation process was systematically investigated with the help of UV-Vis, FTIR spectra and GC-MS. The results showed that the COD removal efficiency of the MFC reached 93.5% and the maximum power density achieved 175 mW/m². In the anodic chamber, low molecule weight acid, sugars and cellulose in D. zingiberensis processing wastewater were completely consumed, while complicated contaminants including some furanic and phenolic compounds were decomposed under co-metabolism process. In the cathodic chamber, fatty ester and alkene generated in the anodic chamber were removed, and aromatic compounds were further degraded. Aromatic ester and N-containing compounds were detected as the main residual contaminants by GC-MS. Compared to the effluents of anaerobic digestion and biological aerated filter, fewer and simpler aromatic pollutants existed in the effluents of MFC.     

Butyric acid fermentation in a fibrous bed bioreactor with immobilized Clostridium tyrobutyricum from cane molasses

Butyrate fermentation by immobilized Clostridium tyrobutyricum was successfully carried out in a fibrous bed bioreactor using cane molasses. Batch fermentations were conducted to investigate the influence of pH on the metabolism of the strain, and the results showed that the fermentation gave a highest butyrate production of 26.2 g l⁻¹ with yield of 0.47 g g⁻¹ and reactor productivity up to 4.13 g l⁻¹ h⁻¹ at pH 6.0. When repeated-batch fermentation was carried out, long-term operation with high butyrate yield, volumetric productivity was achieved. Several cane molasses pretreatment techniques were investigated, and it was found that sulfuric acid treatment gave better results regarding butyrate concentration (34.6 ± 0.8 g l⁻¹), yield (0.58 ± 0.01 g g⁻¹), and sugar utilization (90.8 ± 0.9%). Also, fed-batch fermentation from cane molasses pretreated with sulfuric acid was performed to further increase the concentration of butyrate up to 55.2 g l⁻¹.     

Optimization of medium composition for butyric acid production by Clostridium thermobutyricum using response surface methodology

The optimal medium for butyric acid production by Clostridium thermobutyricum in a shake flask culture was studied using statistical experimental design and analysis. The optimal composition of the fermentation medium for maximum butyric acid yield, as determined on the basis of a three-level four-factor Box-Behnken design (BBD), was obtained by response surface methodology (RSM). The high correlation between the predicted and observed values indicated the validity of the model. A maximum butyric acid yield of 12.05 g/l was obtained at K₂HPO₄ 7.2 g/l, 34.9 g/l glucose, 20 g/l yeast extract, and 15 g/l acetate, which compared well to the predicated production of 12.13 g/l.     

Disruption of the acetoacetate decarboxylase gene in solvent-producing Clostridium acetobutylicum increases the butanol ratio

A possible way to improve the economic efficacy of acetone–butanol–ethanol fermentation is to increase the butanol ratio by eliminating the production of other by-products, such as acetone. The acetoacetate decarboxylase gene (adc) in the hyperbutanol-producing industrial strain Clostridium acetobutylicum EA 2018 was disrupted using TargeTron technology. The butanol ratio increased from 70% to 80.05%, with acetone production reduced to approximately 0.21 g/L in the adc-disrupted mutant (2018adc). pH control was a critical factor in the improvement of cell growth and solvent production in strain 2018adc. The regulation of electron flow by the addition of methyl viologen altered the carbon flux from acetic acid production to butanol production in strain 2018adc, which resulted in an increased butanol ratio of 82% and a corresponding improvement in the overall yield of butanol from 57% to 70.8%. This study presents a general method of blocking acetone production by Clostridium and demonstrates the industrial potential of strain 2018adc.     

Homo floresiensis: a cladistic analysis

The announcement of a new species, Homo floresiensis, a primitive hominin that survived until relatively recent times is an enormous challenge to paradigms of human evolution. Until this announcement, the dominant paradigm stipulated that: 1) only more derived hominins had emerged from Africa, and 2) H. sapiens was the only hominin since the demise of Homo erectus and Homo neanderthalensis. Resistance to H. floresiensis has been intense, and debate centers on two sets of competing hypotheses: 1) that it is a primitive hominin, and 2) that it is a modern human, either a pygmoid form or a pathological individual. Despite a range of analytical techniques having been applied to the question, no resolution has been reached. Here, we use cladistic analysis, a tool that has not, until now, been applied to the problem, to establish the phylogenetic position of the species. Our results produce two equally parsimonious phylogenetic trees. The first suggests that H. floresiensis is an early hominin that emerged after Homo rudolfensis (1.86 Ma) but before H. habilis (1.66 Ma, or after 1.9 Ma if the earlier chronology for H. habilis is retained). The second tree indicates H. floresiensis branched after Homo habilis.     

Sustainable wastewater treatment: How might microbial fuel cells contribute

The need for cost-effective low-energy wastewater treatment has never been greater. Clean water for our expanding and predominantly urban global population will be expensive to deliver, eats into our diminishing carbon-based energy reserves and consequently contributes to green house gases in the atmosphere and climate change. Thus every potential cost and energy cutting measure for wastewater treatment should be explored. Microbial fuel cells (MFCs) could potentially yield such savings but, to achieve this, requires significant advances in our understanding in a few critical areas and in our designs of the overall systems. Here we review the research which might accelerate our progress towards sustainable wastewater treatment using MFCs: system control and modelling and the understanding of the ecology of the microbial communities that catalyse the generation of electricity.     

Distinct kinetics of (H/K/N)Ras glucosylation and Rac1 glucosylation catalysed by Clostridium sordellii lethal toxin

Mono-glucosylation of (H/K/N)Ras by Clostridium sordellii lethal toxin (TcsL) blocks critical survival signaling pathways, resulting in apoptotic cell death. One yet unsolved problem in studies on TcsL is the lack of a method allowing the specific detection of (H/K/N)Ras glucosylation. In this study, we identify the Ras(Mab 27H5) antibody as a glucosylation-sensitive antibody capable for the immunoblot detection of (H/K/N)Ras glucosylation in TcsL-treated cells. Alternative Ras antibodies including the K-Ras(Mab F234) antibody or the v-H-Ras(Mab Y13-159) antibody recognize Ras proteins regardless of glucosylation. (H/K)Ras are further shown to be more efficaciously glucosylated by TcsL than Rac1 in rat basophilic leukemia cells as well as in a cell-free system.

Structured summary

MINT-7261742: TcsL (uniprotkb:Q46342) enzymaticly reacts (MI:0414) H-RAS (uniprotkb:P01112) by enzymatic studies (MI:0415)MINT-7261729: TcsL (uniprotkb:Q46342) enzymaticly reacts (MI:0414) Rac1 (uniprotkb:P63000) by enzymatic studies (MI:0415)MINT-7261772: TcsL (uniprotkb:Q46342) enzymaticly reacts (MI:0414) K-RAS (uniprotkb:P01116) by enzymatic studies (MI:0415)MINT-7261784: TcsL (uniprotkb:Q46342) enzymaticly reacts (MI:0414) N-RAS (uniprotkb:P01111) by enzymatic studies (MI:0415)     

Comparative genotyping of Clostridium thermocellum strains isolated from biogas plants: Genetic markers and characterization of cellulolytic potential

Clostridium thermocellum is among the most prevalent of known anaerobic cellulolytic bacteria. In this study, genetic and phenotypic variations among C. thermocellum strains isolated from different biogas plants were determined and different genotyping methods were evaluated on these isolates. At least two C. thermocellum strains were isolated independently from each of nine different biogas plants via enrichment on cellulose. Various DNA-based genotyping methods such as ribotyping, RAPD (Random Amplified Polymorphic DNA) and VNTR (Variable Number of Tandem Repeats) were applied to these isolates. One novel approach – the amplification of unknown target sequences between copies of a previously discovered Random Inserted Mobile Element (RIME) – was also tested. The genotyping method with the highest discriminatory power was found to be the amplification of the sequences between the insertion elements, where isolates from each biogas plant yielded a different band pattern. Cellulolytic potentials, optimal growth conditions and substrate spectra of all isolates were characterized to help identify phenotypic variations. Irrespective of the genotyping method used, the isolates from each individual biogas plant always exhibited identical patterns. This is suggestive of a single C. thermocellum strain exhibiting dominance in each biogas plant. The genotypic groups reflect the results of the physiological characterization of the isolates like substrate diversity and cellulase activity. Conversely, strains isolated across a range of biogas plants differed in their genotyping results and physiological properties. Both strains isolated from one biogas plant had the best specific cellulose-degrading properties and might therefore achieve superior substrate utilization yields in biogas fermenters.     

Selection of a variant of Geobacter sulfurreducens with enhanced capacity for current production in microbial fuel cells

Geobacter sulfurreducens produces current densities in microbial fuel cells that are among the highest known for pure cultures. The possibility of adapting this organism to produce even higher current densities was evaluated. A system in which a graphite anode was poised at −400 mV (versus Ag/AgCl) was inoculated with the wild-type strain of G. sulfurreducens, strain DL-1. An isolate, designated strain KN400, was recovered from the biofilm after 5 months of growth on the electrode. KN400 was much more effective in current production than strain DL-1. This was apparent with anodes poised at −400 mV, as well as in systems run in true fuel cell mode. KN400 had current (7.6 A/m²) and power (3.9 W/m²) densities that respectively were substantially higher than those of DL1 (1.4 A/m² and 0.5 W/m²). On a per cell basis KN400 was more effective in current production than DL1, requiring thinner biofilms to make equivalent current. The enhanced capacity for current production in KN400 was associated with a greater abundance of electrically conductive microbial nanowires than DL1 and lower internal resistance (0.015 versus 0.130 Ω/m²) and mass transfer limitation in KN400 fuel cells. KN400 produced flagella, whereas DL1 does not. Surprisingly, KN400 had much less outer-surface c-type cytochromes than DL1. KN400 also had a greater propensity to form biofilms on glass or graphite than DL1, even when growing with the soluble electron acceptor, fumarate. These results demonstrate that it is possible to enhance the ability of microorganisms to electrochemically interact with electrodes with the appropriate selective pressure and that improved current production is associated with clear differences in the properties of the outer surface of the cell that may provide insights into the mechanisms for microbe–electrode interactions.