Optimization of conditions for the production of pullulan and high molecular weight pullulan by Aureobasidium pullulans

Aureobasidium pullulans had a maximum yield coefficient of pullulan (Y _p/s=0.24) with an initial pH of the culture broth of 6.5 in a shake-flask culture. In a batch culture, the maximum pullulan yield coefficient of 0.30 was obtained at the aeration rate of 0.5 vvm. A yeast-like form and mycelial form of cells were found at the culture broth with pH controlled at 4.5 with a maximum yield coefficient of pullulan of 0.27. However, a high portion (35%) of high molecular weight pullulan (M _w>2 000 000) was produced at pH 6.5 with a yeast-like morphology of the cells.     

Optimization of high molecular weight pullulan production by Aureobasidium pullulans in batch fermentations

Of five strains of Aureobasidium pullulans studied, NRRL Y-2311-1 yielded the highest titer (26.2 g/L) of pullulan and formed the lowest amount of melanin-like pigment. Sucrose was superior to glucose as the carbon and energy source on the basis of yield and titer of pullulan produced. Pullulan titer was higher (26.2 vs 5.1 g/L), biomass concentration was lower (6.9 vs 12.7 g/L), and DO was lower (0 vs 60% of saturation) when the fermenter was agitated by a marine propeller compared to Rushton impellers. Pullulan produced by strain NRRL Y-2311-1 ranged in weight-average molar mass (M(w)) from 486 KDa and number-average molar mass (M(n)) from 220 Da on day 1 of growth to 390 KDa and 690 Da on day 6; M(w) declined by about 35% from day 1 to day 3, the day of maximum pullulan titer. For the other strains, the ranges of molar mass on the day of maximum pullulan titer were 338-614 KDa (M(w)) and 100-6820 Da (M(n)).     

Production of high molecular weight pullulan by Aureobasidium pullulans using glucosamine

Pullulan productivity was optimized in Aureobasidium pullulans ATCC 42023 with 54 g glucose l^–1. Pullulan with its higher molecular weight (>1000000) was produced using 2% (w/v) glucose and 3% (w/v) glucosamine together. The maximum concentration of pullulan was 8 g l^–1 at 140 h with shake-flask culture.     

Sodium chloride improves pullulan production by Aureobasidium pullulans but reduces the molecular weight of pullulan

Applied Microbiology and Biotechnology - The effect of sodium chloride (NaCl) on pullulan production by batch culture of Aureobasidium pullulans CCTCC M 2012259 was investigated. NaCl at...     

Production of high molecular weight pullulan by Aureobasidium pullulans HP-2001 with soybean pomace as a nitrogen source

The production of pullulan by Aureobasidium pullulans HP-2001 was enhanced by yeast extract as a nitrogen source as well as soybean pomace. The highest production of pullulan by A. pullulans HP-2001 with yeast extract was 5.5 g/l whereas that of pullulan with soybean pomace was 7.5 g/l. The gas chromatogram of pullulan produced by A. pullulans HP-2001 with soybean pomace as a nitrogen source showed that the major and minor components were glucose and mannose. The FTIR spectra of pullulans produced with yeast extract, a mixture of yeast extract and soybean pomace, and soybean pomace alone exhibited similar features. The increase in content of reducing sugars after pullulanase treatment of pullulans produced with different nitrogen sources indicated that all the pullulans had alpha-(1,6) glucosidic linkages of alpha-(1,4) linked maltotriose units. The average molecular weights of pullulans produced with various concentrations of yeast extract and soybean pomace ranged from 0.17 to 1.32x10(6) and from 1.32 to 5.66x10(6), respectively. All pullulans produced by A. pullulans HP-2001 in this study had the same basic structures, but their ratios of monomeric components were a little different, which might result in the production of pullulans with different molecular weights.     

Lysosomal high molecular weight multienzyme complex

Three acidic glycosidases: beta-galactosidase (beta-GAL, EC 3.2.1.23), alpha-neuraminidase (NEUR, sialidase, EC 3.2.1.18), N-acetylaminogalacto-6-sulfate sulfatase (GALNS, EC 3.1.6.4) and serine carboxypepidase cathepsin A (EC 3.4.16.1) form a functional high molecular weight complex in the lysosomes. The major constituent of this complex is cathepsin A, the so-called "lysosomal protective protein" (PPCA). By forming a multienzyme complex, it protects the glycosidases from rapid intralysosomal proteolysis, and it is also required for the intracellular sorting and proteolytic processing of their precursors. In man, a deficiency of cathepsin A leads to a combined deficiency of beta-GAL and NEUR activities, called "galactosialidosis". Multiple mutations identified in the cathepsin A gene are the molecular basis of this lysosomal storage disease. This review describes the structural organization of the lysosomal high molecular weight multienzyme complex and the importance of the protective protein/cathepsin A in physiology and pathology.     

乳糖诱导高分子量重组蛛丝蛋白发酵培养基优化

在M9培养基的基础上,以乳糖为诱导剂,对基因重组蛛丝蛋白工程菌pNSR32/BL21(DE3)的发酵培养基进行了优化。利用单因子实验和正交试验优化出表达高分子量重组蛛丝蛋白的最优培养基配方,结果表明：优化的碳源为0.3%的甘油,氮源为3%的酵母膏、0.75％的蛋白胨和0.05％(NH4)2SO4及少量的无机盐。优化培养基有利于菌体的生长和目的蛋白的表达,表达重组蛛丝蛋白达总蛋白量的20%。     

Certain high molecular weight heparin chains have high affinity for vitronectin.

Vitronectin is a 70-kDa protein that is found in both the extracellular matrix as well as serum. Vitronectin is one of the few proteins that regulates both the complement and the coagulation systems. Heparin is known to bind to vitronectin. Review of the literature reveals apparently conflicting outcomes of the interaction of heparin, vitronectin, and the complement system. Previous studies demonstrated that heparin diminishes vitronectin inhibition of complement activity. Numerous studies have also demonstrated that heparin exerts a net inhibitory effect on complement. We used two dimensional affinity resolution electrophoresis (2DARE) to examine this apparent paradox. 2DARE allowed simultaneous determination of binding affinity of heparin for vitronectin as well as the M(r) of the heparin species. In the 2DARE experiment, the interaction of heparin with vitronectin caused retardation of the movement of the heparin through the tube gel in the first dimension. The degree of the retardation of movement was used to calculate the approximate K(d) of that interaction. The heparin from the tube gel was then subjected to a second dimension electrophoresis to determine the M(r) of the heparin. 2DARE analysis of the interaction of heparin with vitronectin clearly demonstrated that a sub-population of heparin chains with M(r) > 8000 bound vitronectin with high affinity whereas most high M(r) chains and all lower M(r) chains showed little to no affinity for vitronectin. Our findings are consistent with the hypothesis that a unique binding domain exists in certain heparin chains for vitronectin.     

A high molecular weight lipopolysaccharide specific bacteriophage for Klebsiella pneumoniae

High-molecular weight lipopolysaccharide (O antigen enriched fraction) from Klebsiella pneumoniae was determined to be the receptor for bacteriophage FC3-1. A methodology for the identification of the lipopolysaccharide component involved in FC3-1 bacteriophage reception was used that is suitable for other phages and host bacteria.     

Heavy chain of human high molecular weight and low molecular weight kininogens binds calcium ion

An antibody subpopulation, anti high molecular weight (anti-HMW) kininogen-Ca2+ antibody able to bind specifically to the HMW kininogen-Ca2+ complex, was isolated from anti-HMW kininogen antiserum. Partially purified anti-HMW kininogen antibody was applied to a HMW kininogen-Sepharose column equilibrated with 40 mM tris(hydroxymethyl)aminomethane hydrochloride buffer, pH 7.5, containing 1.0 M NaCl and 1 mM CaCl2, and anti-HMW kininogen-Ca2+ antibody was eluted with 5 mM ethylenediaminetetraacetic acid. As a result of characterization by enzyme-linked immunosorbent assay, this antibody specifically recognized the cyanogen bromide cleaved fragment 1 (CB-1) region (1-160 amino acid sequence) of the heavy chain of kininogen molecules in the presence of Ca2+ or Mg2+. Furthermore, circular dichroism (CD) experiments showed that the conformational changes of HMW kininogen and heavy chain were induced by metal ions such as Ca2+ and Mg2+ and that these changes were due to the conformational change of the CB-1 region of the heavy chain. The dissociation constant (Kd) for the heavy chain-Ca2+ measured by CD analysis at 214 nm was found to be 0.33 +/- 0.09 mM (mean +/- SD). The number of Ca2+-binding sites of heavy chain calculated from the Hill plot was 1.15 +/- 0.04 (mean +/- SD). Then, a possible Ca2+-binding site was found in the amino-terminal portion of the heavy chain of kininogen molecules.     

Conversion of high molecular weight CRF (corticotropin-releasing factor) or PRF (prolactin-releasing factor) into lower molecular weight forms by boiling at low pH.

Extracts (0.1 N HCl) of bovine hypophyseal stalk had 2 CRF peaks, one (CRF-A) in the void volume with Sephadex G-100 chromatography, the other more retarded (CRF-B). PRF activity of the same extracts eluted in 2 peaks from G-100, one in the void volume (PRF-A) and the other (PRF-B) between A and B CRF peaks. On rechromatography, isolated CRF-A and PRF-A remained in the void volume. However, heating to 100 C at pH 1–2 for 15 min converted CRF-A to CRF-B and PRF-A to PRF-C, which eluted after PRF-B on G-100. We conclude that CRF or PRF can be converted from high to low molecular weight forms with full retention of biological activity.     

The oligomeric structure of high molecular weight adiponectin

There is great interest in the structure of adiponectin as its oligomeric state may specify its biological activities. It occurs as a trimer, a hexamer and a high molecular weight complex. Epidemiological data indicate that the high molecular weight form is significant with low serum levels in type 2 diabetics but to date, has not been well-defined. To resolve this issue, characterization of this oligomer from bovine serum and 3T3-L1 adipocytes by sedimentation equilibrium centrifugation and gel electrophoresis respectively, was carried out, revealing that it is octadecameric. Further studies by dynamic light scattering and electron microscopy established that bovine and possibly mouse high molecular weight adiponectin is C1q-like in structure.     

Combining photolysis and bioprocesses for mineralization of high molecular weight polyacrylamides

The influence of ultraviolet photolysis as a pretreatment to the aerobic and anaerobic biological mineralization of a ¹⁴C-polyacrylamide was assessed using a series of radiorespirometry bioassays. The polyacrylamide studied was non-ionic with molecular weights ranging between 100,000 and 1 million. Aerobic and anaerobic biomineralization of the unphotolysed (raw) polyacrylamide was found to be only 0.60% and 0.70%, respectively, after 6 weeks of incubation, and hence indicative of the natural recalcitrance of polyacrylamide to microbial degradation. The effectiveness of UV irradiation in the physical breakdown of the polyacrylamide chain into oligomers was demonstrated by the shift in the molecular weight distribution and the positive correlation between the time of irradiation and the degree of its biological mineralization. The molecular weight fraction below 3 kD, which represents only 2% of the raw polyacrylamide, was increased to 41, 60 and 80% after 12, 24 and 48 hours of photolysis, respectively. This in turn, yielded, after 6 weeks of incubation, an aerobic mineralization of 5, 17 and 29% of 150 mg/L polyacrylamide, respectively, and an anaerobic mineralization of 3, 5 and 17%, respectively. Biomass acclimation substantially improved the specific initial rate of biomineralization of the photolysed polyacrylamides, but not the overall percentage of polyacrylamides mineralized.     

Glycogen of high molecular weight from mammalian muscle

Glycogen of high molecular weight has been isolated from mammalian muscle, in contrast to the material of low molecular weight commonly described. The large polysaccharide is similar to liver glycogen in the structure of its individual beta-particles and also, partially, in the mode of assembly into the gross alpha-particles. The large particles may be disrupted by 2-mercaptoethanol, but not to the same extent as their liver counterparts.