Catechol oxidase and phenoxazinone synthase activity of a manganese(II) isoindoline complex

The mononuclear [Mn(6′Me₂indH)(H₂O)₂(CH₃CN)](ClO₄)₂ (6′Me₂indH: 1,3-bis(6′-methyl-2′-pyridylimino)isoindoline) complex has been prepared and characterized by various techniques such as elemental analysis, IR, UV-visible and ESR spectroscopy. The title compound was suitable as catalyst for the catalytic oxidation of 3,5-di-tert-butylcatechol (3,5-DTBCH₂) to 3,5-di-tert-butyl-1,2-benzoquinone (3,5-DTBQ) (catecholase activity), and o-aminophenol (OAPH) to 2-aminophenoxazine-3-one (APX) (phenoxazinone synthase activity) with dioxygen at ambient condition in good yields. Kinetic measurements revealed first-order dependence on the catalyst and dioxygen concentration and saturation type behavior with respect to the corresponding substrate. It was also found that the added triethylamine in both systems accelerates the reaction.     

Electron spray ionization mass study on dioxygenation process in the reaction of catecholatoiron(III) complexes with molecular oxygen

The oxygenation reactions of two catecholatoiron(III) complexes, [Fe(TPA)(3,5-di-tert-butylcatecholate)]BPh₄ (1) and [Fe(TPA)(4-chlorocatecholate)]BPh₄ (2) (TPA = tris(pyridin-2-ylmethyl)amine), with O₂ have been investigated by means of ESI-MS spectrometry to elucidate the detailed mechanisms of oxygen atom insertion from O₂ into the catecholate ligands promoted by iron(III) complexes. Both 1 and 2 gave products formed by incorporation of two oxygen atoms into the catecholate ligands; 2,4-di-tert-butylmuconolactone for 1 and cis-dienelactone for 2. ESI-MS spectra of the products formed by the reaction with ¹⁸O₂ revealed the following points: (1) Two oxygen atoms of 2,4-di-tert-butylmuconolactone are mostly derived from ¹⁸O₂. (2) cis-Dienelactone is obtained as a mixture of mono- and double-¹⁸O-labeled species with a ratio of 50:50. These results suggest that the second oxygen atom is incorporated into muconic anhydride through nucleophilic attack on the carbonyl groups of muconic anhydride by the ¹⁸O-oxo-group of the metal center, and that this process competes with dissociation of muconic anhydride from the metal center.     

Iron(III) complexes of tridentate N3 ligands as models for catechol dioxygenases: Stereoelectronic effects of pyrazole coordination

The iron(III) complexes of the tridentate N₃ ligands pyrazol-1-ylmethyl(pyrid-2-ylmethyl)amine (L1), 3,5-dimethylpyrazol-1-ylmethyl(pyrid-2-ylmethyl)amine (L2), 3-iso-propylpyrazol-1-ylmethyl(pyrid-2-ylmethyl)amine (L3) and (1-methyl-1H-imidazol-2-ylmethyl)pyrid-2-ylmethylamine (L4) have been isolated and studied as functional models for catechol dioxygenases. They have been characterized by elemental analysis and spectral and electrochemical methods. The X-ray crystal structure of the complex [Fe(L1)Cl₃] 1 has been successfully determined. The complex possesses a distorted octahedral coordination geometry in which the tridentate ligand facially engages iron(III) and the Cl⁻ ions occupy the remaining coordination sites. The Fe-N_pz bond distance (2.126(5) Å) is shorter than the Fe-N_py bond (2.199(5) Å). The systematic variation in the ligand donor substituent significantly influences the Lewis acidity of the iron(III) center and hence the interaction of the present complexes with a series of catechols. The catecholate adducts [Fe(L)(DBC)Cl], where H₂DBC = 3,5-di-tert-butylcatechol, have been generated in situ and their spectral and redox properties and dioxygenase activities have been studied in N,N-dimethylformamide solution. The adducts [Fe(L)(DBC)Cl] undergo cleavage of DBC²⁻ in the presence of dioxygen to afford major amounts of intradiol and smaller amounts extradiol cleavage products. In dichloromethane solution the [Fe(L)(DBC)Cl] adducts afford higher amounts of extradiol products (64.1-22.2%; extradiol-to-intradiol product selectivity E/I, 2.6:1-4.5:1) than in DMF (2.5-6.6%; E/I, 0.1:1-0.4:1). The results are in line with the recent understanding of the function of intra- and extradiol-cleaving catechol dioxygenases.     

Catecholase activity of dicopper(II)-bispidine complexes: stabilities and structures of intermediates,kinetics and reaction mechanism

A mechanism for the oxidation of 3,5-di-tert-butylcatechol (dtbc) with dioxygen to the corresponding quinone (dtbq), catalyzed by bispidine-dicopper complexes (bispidines are various mono- and dinucleating derivatives of 3,7-diazabicyclo[3.3.1]nonane with bis-tertiary-amine–bispyridyl or bis-tertiary-amine–trispyridyl donor sets), is proposed on the basis of (1) the stoichiometry of the reaction as well as the stabilities and structures [X-ray, density functional theory (B3LYP, TZV)] of the bispidine-dicopper(II)–3,4,5,6-tetrachlorcatechol intermediates, (2) formation kinetics and structures (molecular mechanics, MOMEC) of the end-on peroxo–dicopper(II) complexes and (3) kinetics of the stoichiometric (anaerobic) and catalytic (aerobic) copper-complex-assisted oxidation of dtbc. This involves (1) the oxidation of the dicopper(I) complexes with dioxygen to the corresponding end-on peroxo–dicopper(II) complexes, (2) coordination of dtbc as a bridging ligand upon liberation of H₂O₂ and (3) intramolecular electron transfer to produce dtbq, which is liberated, and the dicopper(I) catalyst. Although the bispidine complexes have reactivities comparable to those of recently published catalysts with macrocyclic ligands, which seem to reproduce the enzyme-catalyzed process in various reaction sequences, a strikingly different oxidation mechanism is derived from the bispidine–dicopper-catalyzed reaction. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Synthesis and characterization of organotin Schiff base chelates

The synthesis and characterization of five organotin compounds containing Salophen(^tBu) [Salophen(^tBu)=N,N′-phenylene-bis(3,5-di-tert-butylsalicylideneimine)], Salomphen(^tBu) [Salomphen(^tBu)=N,N′-(4,5-dimethyl)phenylene-bis(3,5-di-tert-butylsalicylideneimine)] and Phensal(^tBu) [Phensal(^tBu)=3,5-di-tert-butylsalicylidene(1-aminophenylene-2-amine)] ligands is described. These compounds include the monomeric complexes LSnCl₂ (where L=Salophen(^tBu), L=Salomphen(^tBu)), L(ⁿBu)SnCl (where L=Salophen(^tBu), Salomphen(^tBu)), L(ⁿBu)SnCl₂ (where L=Phensal(^tBu)). Spectroscopic techniques including ¹¹⁹Sn NMR and X-ray crystallography were used in the characterization of the compounds.     

Mono- and dinuclear (o-thioetherphenolato)-copper(II) complexes. Structural models for galactose oxidase

Three new o-thioetherphenol ligands have been synthesized: 1,2-bis(3,5-di-tert-butyl-2-hydroxyphenylsulfanyl)ethane (H₂bse), 1,2-bis(3,5-di-tert-butyl-2-hydroxyphenylsulfanyl)benzene (H₂bsb), and 4,6-di-tert-butyl-2-phenylsulfanylphenol (Hpsp). Their complexes with copper(II) were prepared and investigated by UV-Vis-, EPR-spectroscopy; their electro- and magnetochemistry have also been studied: [Cu^II(psp)₂] (1), [Cu^II₂(bse)₂] (2), [Cu^II₂(bsb)₂] (3), [Cu^II(bsb)(py)₂] (4). The crystal structures of the ligands H₂bse, H₂bsb, Hpsp and of the complexes 1, 2, 3, 4 have been determined by X-ray crystallography.     

Cd(II) and Cu(II) complexes of polydentate Schiff base ligands: synthesis, characterization, properties and biological activity

We report the synthesis of the Schiff base ligands, 4-[(4-bromo-phenylimino)-methyl]-benzene-1,2,3-triol (A₁), 4-[(3,5-di-tert-butyl-4-hydroxy-phenylimino)-methyl]-benzene-1,2,3-triol (A₂), 3-(p-tolylimino-methyl)-benzene-1,2-diol (A₃), 3-[(4-bromo-phenylimino)-methyl]-benzene-1,2-diol (A₄), and 4-[(3,5-di-tert-butyl-4-hydroxy-phenylimino)-methyl]-benzene-1,3-diol (A₅), and their Cd(II) and Cu(II) metal complexes, stability constants and potentiometric studies. The structure of the ligands and their complexes was investigated using elemental analysis, FT-IR, UV-Vis, ¹H and ¹³C NMR, mass spectra, magnetic susceptibility and conductance measurements. In the complexes, all the ligands behave as bidentate ligands, the oxygen in the ortho position and azomethine nitrogen atoms of the ligands coordinate to the metal ions. The keto-enol tautomeric forms of the Schiff base ligands A₁-A₅ have been investigated in polar and non-polar organic solvents. Antimicrobial activity of the ligands and metal complexes were tested using the disc diffusion method and the strains Bacillus megaterium and Candida tropicalis.Protonation constants of the triol and diol Schiff bases and stability constants of their Cu²⁺ and Cd²⁺ complexes were determined by potentiometric titration method in 50% DMSO-water media at 25.00 ± 0.02 °C under nitrogen atmosphere and ionic strength of 0.1 M sodium perchlorate. It has been observed that all the Schiff base ligands titrated here have two protonation constants. The variation of protonation constant of these compounds was interpreted on the basis of structural effects associated with the substituents. The divalent metal ions of Cu²⁺ and Cd²⁺ form stable 1:2 complexes with Schiff bases.The Schiff base complexes of cadmium inhibit the intense chemiluminescence reaction in dimethylsulfoxide (DMSO) solution between luminol and dioxygen in the presence of a strong base. This effect is significantly correlated with the stability constants K_CdL of the complexes and the protonation constants K_OH of the ligands; it also has a nonsignificant association with antibacterial activity.     

Catechol thioethers with physiologically active fragments: Electrochemistry,antioxidant and cryoprotective activities

A number of asymmetrical thioethers based on 3,5-di-tert-butylcatechol containing sulfur atom bonding with physiologically active groups in the sixth position of aromatic ring have been synthesized and the electrochemical properties, antioxidant, cryoprotective activities of new thioethers have been evaluated. Cyclic voltammetry was used to estimate the oxidation potentials of thioethers in acetonitrile. The electrooxidation of compounds at the first stage leads to the formation of o-benzoquinones. The antioxidant activities of the compounds were determined using 2,2′-diphenyl-1-picrylhydrazyl radical (DPPH) assay, experiments on the oxidative damage of the DNA, the reaction of 2,2′-azobis(2-amidinopropane hydrochloride) (AAPH) induced glutathione depletion (GSH), the process of lipid peroxidation of rat liver (Wistar) homogenates in vitro, and iron(II) chelation test. Compounds 1–9 have greater antioxidant effectiveness than 3,5-di-tert-butylcatechol (CatH₂) in all assays. The variation of physiologically active groups at sulfur atom allows to regulate lipophilic properties and antioxidant activity of compounds. Thioethers 3, 4 and 7 demonstrate the combination of radical scavenging, antioxidant activity and iron(II) binding properties. The researched compounds 1–9 were studied as possible cryoprotectants of the media for cryopreservation of the Russian sturgeon sperm. Novel cryoprotective additives in cryomedium reduce significantly the content of membrane-permeating agent (DMSO). A cryoprotective effect of an addition of the catechol thioethers depends on the structure of groups at sulfur atom. The cryoprotective properties of compounds 3, 4 and 7 are caused by combination of catechol fragment, bonded by a thioether linker with a long hydrocarbon chain and a terminal ionizable group or with a biologically relevant acetylcysteine residue.     

A new type of electrochemical oxidation of alcohols mediated with a ruthenium-dioxolene-amine complex in neutral water

Electrochemical oxidation of [Ru^II(terpy)(sq)(NH₃)]⁺ in neutral water (pH 8.0) at +0.8 V (versus SCE) generated [Ru^II(terpy)(q)(NH₂)]²⁺ and/or [Ru^III(terpy)(sq)(NH₂)]²⁺ (terpy = 2,2′:6′,2′′-terpyridine, sq = 3,5-di-tert-butyl-1,2-semiquinonate, q = 3,5-di-tert-butyl-1,2-benzoquinone), which played roles in hydrogen abstraction and one-electron acceptor in the catalytic oxidation of methanol, ethanol, and 2-propanol affording formaldehyde, acetoaldehyde, and acetone, respectively, under the electrolysis conditions.     

Functional mimics of catechol oxidase by mononuclear copper complexes of sterically demanding [NNO] ligands

Several mononuclear copper complexes 1(a-b) and 2(a-b) supported over sterically demanding [NNO] ligands namely, N-(aryl)-2-[(pyridin-2-ylmethyl)amino]acetamide [aryl = 2,6-diethylphenyl (1) and mesityl (2)], exhibit catecholase-like activity in performing the aerial oxidation of 3,5-di-t-butylcatehol (3,5-DTBC) to 3,5-di-t-butyl-catequinone (3,5-DTBQ) under ambient conditions. The 1(a-b) and 2(a-b) complexes were directly synthesized from the reaction of the respective ligands 1-2 with CuX₂·nH₂O (X = Cl, NO₃, n = 2, 3) in 55-85% yield. Mechanistic insights on the catalytic cycle as obtained by density functional theory studies for a representative complex 1a suggest that an intramolecular hydrogen transfer, from a catechol-OH moiety to a copper bound superoxo moiety, form the rate-determining step of the oxidation process, displaying an activation barrier of 18.3 kcal/mol (ΔG^‡) [6.9 kcal/mol in Δ(PE + ZPE)^‡ scale].     

Oxidative addition of 3,6-di-tert-butyl-o-benzoquinone and 4,6-di-tert-butyl-N-(2,6-di-iso-propylphenyl)-o-iminobenzoquinone to SnCl2

Addition of 3,6-di-tert-butyl-o-benzoquinone (3,6-DBBQ) to SnCl₂ in THF leads to the oxidation of Sn(II) to Sn(IV) with formation of catecholate complex (3,6-DBCat)SnCl₂ · 2THF (1), where 3,6-DBCat is 3,6-di-tert-butyl-catecholate dianion. The reaction of 4,6-di-tert-butyl-N-(2,6-di-iso-propylphenyl)-o-iminobenzoquinone (IBQ-Prⁱ) also proceeds on the oxidative-addition mechanism yielding bis-iminosemiquinonato species (ISQ-Prⁱ)₂SnCl₂(2), where ISQ-Prⁱ is anion-radical 4,6-di-tert-butyl-N-(2,6-di-iso-propylphenyl)-o-iminobenzosemiquinolate. The complexes have been characterized by IR, X-band EPR, ¹H NMR (for 1) spectroscopy and magnetochemistry (for 2). X-ray analysis data show the distorted octahedral environment of tin(IV) for both complexes. Complex 1 is diamagnetic (ground state S = 0), while 2 has triplet ground state (S = 1, biradical). Catecholate complex 1 is able to be a spin trap for different organic radicals.     

Magnetic and catalytic properties of a new copper(II)-Schiff base 2D coordination polymer formed by connected helical chains

A dicyanamide bridged 2D polynuclear complex of copper(II) having molecular formula [Cu₂(L)(μ_1,5-dca)₂]_n (1) has been synthesized using the Schiff base ligand N,N′-bis(salicylidene)-1,3-diaminopentane, (H₂L) and sodium dicyanamide (dca). The complex presents a 2D hexagonal structure formed by 1,5-dca singly bridged helical chains connected through double 1,5-dca bridges. The chelating characteristics of the H₂L Schiff base ligand results in the formation of copper(II) dimer with a double phenoxo bridge presenting a very strong antiferromagnetic coupling in the copper(II) derivative (1) (J = −510 cm⁻¹). The dimeric asymmetric unit of 1 is very similar to the active site of the catechol oxidase and, as expected, also presents catalytic activity for the oxidation of 3,5-di-tert-butylcatechol to 3,5-di-tert-butylquinone in presence of O₂, as demonstrated by kinetic studies of this oxidation reaction monitored by absorption spectroscopy resulting in high turnover number (K_cat = 259 h⁻¹).     

Deuterium labeling of norbornene derivatives by iridium catalyzed H/D exchange catalysis

The H/D exchange catalysis using the Ir(I) complex [Tp^Me₂Ir(η⁴-2,3-dimethylbutadiene)] (Tp^Me₂=hydridotris(3,5-dimethylpyrazolyl)borate) as the precatalyst was studied for selective deuteration of norbornene derivatives. In dependence of the norbornene substitution in 2,3 positions, selective deuteration of the norbornene double bond could be achieved. (±)-endo,exo-6-Deutero-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester was isolated in 82% yield.     

Synthesis, characterization and catalytic activity of Salen-(sodium)2 and (Salen)2-lanthanum-sodium complexes

Salen-Na₂(1) and (Salen)₂-La-Na(2) complexes have been prepared and structurally characterized [Salen = N,N′-bis (3,5-di-tert-butylsalicylidene)-1,3-propanediamine]. Experimental results show that the two complexes are efficient catalysts for the ring-opening polymerization (ROP) of l-lactide. According to the data of ¹H NMR and electrospray-ionization (+ESI) mass spectrum, it is suggested that the obtained polymer is mainly cyclic polylactide (PLA) for a short PLA chain, but a mixture of cyclic and linear PLA for a long PLA chain. Structure-activity analysis of the two complexes is also done. We investigated why Salen-Na₂ complex is more active (Salen)₂-La-Na complex as the catalyst in the ROP of l-lactide and why the PLA catalyzed by complex 2 has lower PDIs than that catalyzed by complex 1.     

The metabolism of 3,5-di-tert.-butyl-4-hydroxytoluene in the rat and in man

1. The major metabolites of 3,5-di-tert.-butyl-4-hydroxytoluene (BHT) in the rat are 3,5-di-tert.-butyl-4-hydroxybenzoic acid (BHT-acid), both free (9% of the dose) and as a glucuronide (15%), and S-(3,5-di-tert.-butyl-4-hydroxybenzyl)-N-acetylcysteine. 2. The mercapturic acid does not appear to derive from the usually accepted enzyme mechanism, and may involve a non-enzymic reaction between BHT free radical and cysteine. 3. The ester glucuronide and mercapturic acid found in rat urine are also the major metabolites in rat bile and must be responsible for the enterohepatic circulation. 4. Free BHT-acid is the main component in rat faeces. 5. In man, BHT-acid, free and conjugated, is a minor component in urine, and the mercapturic acid is virtually absent. The bulk of the radioactivity is excreted as the ether-insoluble glucuronide of a metabolite in which the ring methyl group and one tert.-butyl methyl group are oxidized to carboxyl groups, and a methyl group on the other tert.-butyl group is also oxidized, probably to an aldehyde group. 6. These differences in metabolism by the rat and by man are sufficient to account for the difference in excretion by the two species.     

Pyrazolate-bridged group 11 metal(I) complexes: Substituent effects on the supramolecular structures and physicochemical properties

Polynuclear homoleptic pyrazolate-bridged group 11 metal(I) complexes with three different alkyl substituted pyrazolate anions, 3,5-diisopropylpyrazolate (3,5-iPr₂pz⁻ = L1⁻), 3-tert-butyl-5-isopropylpyrazolate (3-tBu-5-iPrpz⁻ = L3⁻), and 3,5-di-tert-butylpyrazolate (3,5-tBu₂pz⁻ = L4⁻), i.e. [Cu(μ-3,5-iPr₂pz)]₃ (CuL1), [Ag(μ-3,5-iPr₂pz)]₃ (AgL1), [Au(μ-3,5-iPr₂pz)]₃ (AuL1), [Cu(μ-3-tBu-5-iPrpz)]₄ (CuL3), [Ag(μ-3-tBu-5-iPrpz)]₃ (AgL3), [Au(μ-3-tBu-5-iPrpz)]₄ (AuL3), [Cu(μ-3,5-tBu₂pz)]₄ (CuL4), [Ag(μ-3,5-tBu₂pz)]₄ (AgL4), and [Cu(μ-3,5-tBu₂pz)]₄ (AuL4), were systematically synthesized in order to investigate the influence of pyrazole bulkiness on their structures and physicochemical properties. The structural characterization indicates that the geometries are greatly influenced by the steric hindrance exerted by the substituent groups of the pyrazolyl rings and the differences of the central metal (I) ionic radius (Cu⁺ < Au⁺ < Ag⁺). These complexes were also characterized by spectroscopic techniques, namely, UV-Vis, IR/far-IR, Raman, and luminescence spectroscopy.     

Examining the impact of steric and electronic variation in N2S scorpionate ligands on the properties of zinc(II) and cadmium(II) complexes

A series of LZn(II)Br (1-4) and LCd(II)Cl complexes (9-11) has been prepared by the reaction of metal halide precursors with the lithium salts of the N₂S⁻ ligands bis(3,5-diisopropylpyrazol-1-yl)dithioacetate (L¹), bis(3,5-di-tert-butylpyrazol-1-yl)dithioacetate (L²), N-phenyl-2,2-bis(3,5-diisopropylpyrazol-1-yl)thioacetamide (L³) and N-phenyl-2,2-bis(3,5-di-tert-butylpyrazol-1-yl)thioacetamide (L⁴). Characterization by X-ray crystallography and DOSY NMR studies indicate that LZnBr complexes 1-4 are mononuclear both in the solid state and in solution. Steric differences between ligands L¹-L⁴ result in distortion from an ideal tetrahedral geometry for each complex, with the degree of distortion depending on the bulk of the ligand substituents. In contrast, the related complex L³CdCl was shown by X-ray crystallography to dimerize in the solid state to form the chloride-bridged five-coordinate complex [L³CdCl]₂ (10). Despite 10 having a dinuclear structure in the solid state, DOSY NMR studies indicate 9-11 exist as mononuclear LCdCl species in solution. In addition, Zn(II) cyanide complexes of the form LZnCN [L = L¹ (5), L³ (7), L⁴ (8)] have been characterized and the X-ray structure of 8 determined. Moreover, density functional theory calculations have been conducted which yield important insight into the bonding in 1-4 and 5-8 and the electronic impact of ligands L¹-L⁴ on the zinc(II) ion and its ability to function as a Lewis acid catalyst.     

Synthesis and evaluation of dithiolethiones as novel cyclooxygenase inhibitors

3H-1,2-Dithiole-3-thiones substituted with a 3,5-di-tert-butyl-4-hydroxyphenyl (DTBHP) or a 3,5-di-tert-butyl-4-methoxyphenyl group at the C5 position were prepared and their ability to inhibit the cyclooxygenase isoenzymes, COX-1 and COX-2 was evaluated. Both compounds were potent inhibitors of COX-2 (relative to rofecoxib), and while the phenol was a weak inhibitor of COX-1, the methyl ether gave no measurable inhibition. Docking studies of the two compounds into the COX-1 and -2 active sites showed that the methyl ether could only fit in the COX-2 active site whereas the phenol could be docked into both COX-1 and -2. This study reports a new mode for inhibitor binding to COX-1 and -2 and a novel structural scaffold for the development of COX-2 selective inhibitors.     

Dechlorination of diphenyl chlorophosphate with tin and sodium 3,6-di-tert-butyl-ortho-semiquinones

Dechlorination reactions of diphenyl chlorophosphate (PhO)₂P(O)Cl with 3,6-di-tert-butyl-ortho-semiquinone complexes of triphenyl tin, SQSn(Ph)₃ and sodium, SQNa have been investigated by electron spin resonance (ESR) both in solutions at 300 K and in solid phase at 77 K using mechanochemical activation. Paramagnetic 3,6-di-tert-butyl-ortho-semiquinone ligand (SQ) was used as spin probe to monitor changes in the Sn coordination sphere during the dechlorination reaction of (PhO)₂P(O)Cl and consecutive formation of tin chloride derivatives SQSnCl(Ph)₂, SQSnCl₂Ph, and SQSnCl₃. Their structure was revealed based on the analysis of hyperfine interaction constants due to ¹H nuclei in the 4,5-positions of the aromatic ring of the SQ ligand, hyperfine interaction constants due to ³⁵Cl and ³⁷Cl nuclei of chlorine atoms in the Sn coordination sphere, and hyperfine interaction constants due to ¹¹⁷Sn and ¹¹⁹Sn nuclei of the central metal ion. Interaction of SQSnCl₃ with (PhO)₂P(O)Cl leads to the formation of a meta-stable radical-anion complex [SQSnCl₄]⁻ P⁺(O)(OPh)₂, which transforms to SQSnCl₃?P(O)R₃, a stable adduct of SQSnCl₃ with dechlorinated phosphate of a general formula P(O)R₃. Analysis of solution dechlorination reaction products suggests the formation of diphenyl-phosphoryl radical (PhO)₂P(O), which was not observed in solutions. Dechlorination of (PhO)₂P(O)Cl with sodium 3,6-di-tert-butyl-ortho-semiquinone SQNa can proceed in solid phase in liquid nitrogen at 77 K via mechanochemical activation using a ball mill. ESR analysis of the cryo-mechanochemical reaction showed the formation of the adduct of (PhO)₂P(O) radical with 3,6-di-tert-butyl-ortho-quinone.     

Oxidative dealkylation of a hindered phenol catalyzed by copper (II) bis benzimidazole diamide complex

The oxidative dealkylation of 2,4,6-tri-tert-butylphenol (TTBP) has been investigated using molecular oxygen and [Cu(NO₃(GBHA)](NO₃) as catalyst, where GBHA is N,N′-bis((benzimidazol-2-yl)methyl)hexanediamide [(a) M. Gupta, P. Mathur, R.J. Butcher, Inorg. Chem. 40 (2001) 878; (b) M. Gupta, S.K. Das, P. Mathur, A.W. Cordes, Inorg. Chim. Acta 353 (2003) 197; (c) S. Tehlan, M.S. Hundal, P. Mathur, Inorg. Chem. 43 (2004) 6589; (d) F. Afreen, P. Mathur, A. Rheingold, Inorg. Chim. Acta 358 (2005) 1125.]. X-ray structural characterization of complex [Cu(NO₃)(GBHA)](NO₃) · CH₃OH confirms that the Cu (II) ion is in a distorted square pyramidal geometry (τ = 0.168). The TTBP oxidation reaction proceeds via tri-tert-butylphenoxyl radical producing two products 2,6-di-tert-butyl-1,4-benzoquinone (A) and 4,6-di-tert-butyl-1,2-benzoquinone (B). Both A and B have been well characterized by ¹H NMR, ¹³C NMR, UV-Vis and mass data.