On the nature of mutual inactivation between [Cp*Rh(bpy)(H2O)]2+ and enzymes – analysis and potential remedies

Pentamethylcyclopentadienyl rhodium bipyridine ([Cp*Rh(bpy)(H₂O)]²⁺) is a versatile catalyst to promote biocatalytic redox reactions. However, its major drawback lies in the mutual inactivation of [Cp*Rh(bpy)(H₂O)]²⁺ and the biocatalyst. This interaction was investigated using the alcohol dehydrogenase from Thermus sp. ATN1 (TADH) as model enzyme. TADH binds 4 equiv. of [Cp*Rh(bpy)(H₂O)]²⁺ without detectable decrease in catalytic activity and stability. Higher molar ratios lead to time-, temperature-, and concentration-dependent inactivation of the enzyme suggesting [Cp*Rh(bpy)(H₂O)]²⁺ to function as an ‘unfolding catalyst’. This detrimental activity can be circumvented using strongly coordinating buffers (e.g. (NH₄)₂SO₄) while preserving its activity as NAD(P)H regeneration catalyst under electrochemical reaction conditions.     

Structure and properties of cobalt ortho-phenylenediacetate coordination polymers with rigid dipyridyl ligands

Divalent cobalt coordination polymers containing both ortho-phenylenediacetate (ophda) and rigid dipyridyl ligands 4,4′-bipyridine (bpy) or 1,2-bis(4-pyridyl)ethylene (dpee) display different topologies depending on carboxylate binding mode, tether length, and inclusion of charged species. [Co(ophda)(H₂O)(dpee)]_n (1) displays a common (4,4) grid layer motif. Use of the shorter bpy tether afforded {[Co₂(ophda)₂(bpy)₃(H₂O)₂][Co(bpy)₂(H₂O)₄](NO₃)₂·2bpy·7H₂O}_n (2) or [Co(ophda)(bpy)]_n (3) depending on cobalt precursor. Compound 2 manifests 5-connected [Co₂(ophda)₂(bpy)₃(H₂O)₂]_n pillared bilayer slabs with rare 4⁸6² SnS topology and entrained [Co(bpy)₂(H₂O)₄]²⁺ complex cations. The 3-D coordination polymer 3 has an uncommon 4,6-connected binodal (4⁴6²)(4⁴6¹⁰8) fsc topology, and shows ferromagnetic coupling (J = +1.5(2) cm⁻¹) along 1-D spiro-fused [Co(OCO)₂]_n chain submotifs.     

Rh and Ir dibenzo[a,e]cyclooctatetraene complexes: Chloro, hydroxo, and mixed Au oxo complexes

New and improved procedures are reported for the synthesis of [M(DBCOT)(μ-Cl)]₂ (M = Rh, Ir; DBCOT = dibenzo[a,e]cyclooctatetraene) from MCl₃(H₂O)_x or [M(COD)(μ-Cl)]₂ and DBCOT. Treatment of [M(DBCOT)(μ-Cl)]₂ with [(LAu)₃(μ-O)]BF₄(L = PPh₃, P^tBu₃) yields the mixed-metal oxo complexes [M(DBCOT)(μ⁴-O)(AuL)₂]₂(BF₄)₂. Dimeric [Rh(DBCOT)(μ-OH)]₂ is obtained from the reaction of [M(DBCOT)(μ-Cl)]₂ with KOH in EtOH/H₂O. All complexes except [Rh(DBCOT)(μ-Cl)]₂ have been structurally characterized by single crystal X-ray diffraction.     

pH-value-controlled assembly of photoluminescent zinc coordination polymers

By pH-value adjustment, the reactions of zinc salt, 1,3,5-benzenetricarboxylic acid (H₃btc) and 4,4′-bipyridine (bpy) yield three coordination polymers, formulated as [Zn₃(btc)₂(bpy)(H₂O)₂]_n (1), [Zn(Hbtc)(bpy)(H₂O)]_n · 3nH₂O (2) and [Zn(Hbtc)(bpy)(H₂O)]_n · 4nH₂O (3), respectively. The structure of 1 is a 3D network containing channels filled with bpy ligands. Compound 2 consists of twofold interpenetrating (10,3)-b networks, while compound 3 is a 2D layer structure. The fluorescent studies reveal that they exhibit intense violet luminescence in solid state.     

Oxo-transfer catalysis from t-BuOOH with C-H bond insertion using tridentate Schiff-base-chelate complexes of ruthenium(III)

Mixed-chelate complexes of ruthenium have been synthesized using tridentate Schiff-base ligands (TDLs) derived by condensation of aldehydes (salicyldehyde, 2-pyridinecarboxaldehyde) with 2-aminobenzoic acid, and bidentate ligands (2,2^′-bipyridine or picolinic acid). [Ru^III(cpsd)(bipy)(H₂O)]⁺ (1), [Ru^III(cpsd)(pic)(H₂O)] (2), [Ru^III(cppc)(bipy)(H₂O)]²⁺ (3) and [Ru^III(cppc)(pic)(H₂O)]⁺ (4) complexes (where, cpsd²⁻=(N-(2-carboxyphenyl)salicylaldiminato); cppc⁻=N-2-carboxyphenylpyridine-2-carboxaldiminato; bipy=2,2^′-bipyridine and pic⁻=picolinate) were characterized by analytical, spectral (IR and UV-Vis), conductance, magnetic moment and electrochemical studies. Catalysis of hydrocarbon oxidations for cyclohexene, cyclohexane, cyclohexanol, toluene, benzyl alcohol, and tetrahydrofuran have been studied using various O-atom transfer agents (t-BuOOH, H₂O₂, NaOCl, KHSO₅ and pyridinium-N-oxide). The influence of product yield as a function of solvent was evaluated for CH₂Cl₂, CH₃CN, and 1,4-dioxane. Coordinating solvents suppress the reactivity by inhibiting coordination of t-BuOOH, and compete for the Ru^VO group through their own intrinsic C-H reactivity. The main pathway transfers the oxo group from the [RuO(TDL)(XY)] intermediate, TDL=cpsd²⁻ and cppc²⁻; XY=bipy or pic⁻, with insertion of the oxo group into a C-H bond of all substrates tested (rather than olefin epoxidation for cyclohexene). A mechanism involving intermediacy of a high valent Ru(V)-oxo species is proposed for the catalytic oxidation processes.     

Structural comparison of (pentamethylcyclopentadienyl)iridium(III) azido complexes containing potentially N,S-bidentate N-heterocyclic thiolates: 2- or 8-quinolinethiolate and benzimidazole-2-thiolate

The crystal structures of mononuclear (azido)(pentamethylcyclopentadienyl)iridium(III) complexes bearing 2- or 8-quinolinethiolate (n-Sqn⁻), [Cp^∗Ir(N₃)(n-Sqn)] {n = 2 (1) or 8 (2); Cp^∗ = η⁵-C₅Me₅} have been determined by X-ray analysis. The 2-Sqn complex, 1, acquires severe steric strains in the four-membered κ²N,S chelate ring, while the 8-Sqn isomer, 2, forms a strain-free five-membered planar κ²N,S chelate ring. It has also been revealed that the corresponding benzimidazole-2-thiolate (Hbimt⁻) complex, which was obtained similarly to the above n-Sqn complexes from [Cp^∗Ir(N₃)₂]₂ and Na(Hbimt), takes an unsymmetrical dinuclear structure bridged by two Hbimt⁻ ligands with different bonding modes, [Cp^∗Ir(N₃){μ(S:N¹)-Hbimt}{μ(S:S)-Hbimt}Ir(N₃)Cp^∗] · MeOH (3).     

Monodentate, didentate chelating, and bridging 1,8-naphthyridine complexes of pentamethylcyclopentadienyliridium(III): Syntheses and structures in the solid states and in solution

A series of new iridium(III) complexes containing pentamethylcyclopentadienyl (Cp^∗ = η⁵-C₅Me₅) and 1,8-naphthyridine (napy) have been prepared. X-ray crystallography revealed that napy acted as a monodentate, a didentate chelating, and a bridging ligand in complexes of [Cp^∗IrCl₂(napy)] (1), [Cp^∗IrCl(napy)]PF₆ (2), and [(Cp^∗IrCl)₂(H)(napy)]PF₆ (4), respectively. The crystal structure of [Cp^∗Ir(napy)₂](PF₆)₂ (3) has also been determined; the dicationic complex bore both monodentate and chelating napy ligands. Dinuclear Cp^∗Ir^III complex bridged by napy was only isolable if two Ir^III centers were supported by a hydride (H⁻) bridge. In complexes 2 and 3, the four-membered chelate rings formed by napy exhibited a large steric strain; in the rings the NIrN bond angles were only 60.5(2)-61.0(4)° and the IrNC angles were 94.7(8)-96.7(8)°. The bridging coordination of napy in complex 4 also afforded a large strain, i.e., the Ir^III centers were displaced by 0.84(3) Å from the napy plane, due to the steric interaction between two Cp^∗IrCl moieties. The monodentate napy complex 1 in CDCl₃ or CD₂Cl₂ at ambient temperature showed a rapid coordination-site exchange reaction, which gave two N sites of napy equivalent; at temperatures below −40 °C, the ¹H NMR spectra corresponded to the molecular structure of [Cp^∗IrCl₂(napy-κN)]. The analogous diazido complex of [Cp^∗Ir(N₃)₂(napy)] (5) has also been prepared, and the crystal structure has been determined. In contrast to the dichloro complex 1, the diazido complex 5 exhibited a dissociation equilibrium of coordinated napy in solution.     

Chemistry of the binary mixture of 1,10-phenanthroline and zinc perchlorate hexahydrate in methanol and gas phase. Monohydroxo species and tricoordination of zinc and water clusters

ESIMS reveals that methanol solutions of 1:1, 1:2 and 1:3 mixtures of Zn(ClO₄)₂ · 6H₂O and 1,10-phenanthroline (phen) generate [Zn(phen)(OH)]⁺, [Zn(phen)(H₂O)₄(OH)]⁺, [Zn(phen)₂(H₂O)(OH)]⁺and [Zn(phen)₂(H₂O)₄(OH)]⁺ ions in the gas phase. DFT calculations at the B3LYP/LanL2DZ level show that zinc is planar tricoordinate in [Zn(phen)(OH)]⁺ and the cis configuration is more stable than the trans one for the hexacoordinate ion [Zn(phen)₂(H₂O)(OH)]⁺. DFT calculations also show that the [Zn(phen)(H₂O)₄(OH)]⁺ and [Zn(phen)₂(H₂O)₄(OH)]⁺ ions are actually [Zn(phen)(H₂O)(OH)]⁺ · 3H₂O and [Zn(phen)₂(H₂O)(OH)]⁺ · 3H₂O containing extended motifs of H-bonded water clusters. The aqua species corresponding to the monohydroxo ions are acidic. Their acid dissociations are modeled collectively by equilibrium (see below) where other ligands around Zn are not specified. An attempt is then made to estimate K_a

     

Self-assembly of four three-dimensional reduced molybdenum(V) phosphates decorated with transitional metal complexes

Four new three-dimensional materials built from reduced molybdenum(V) phosphates as building blocks and transitional metal (Co, Zn and Cd) complexes as linkers, (Hbpy)₂[Co(bpy)(H₂O)]₂[Co(H₂PO₄)₂ (HPO₄)₆(MoO₂)₁₂(OH)₆] (1), [Co(H₂O)₄]₂[Co(Hbpy)(H₂O)]₂[Co(bpy)][Co(HPO₄)₄(PO₄)₄(MoO₂)₁₂(OH)₆] · 6H₂O (2), Na₂[Zn(Hbpy)(H₂O)₂]₂[Zn(Hbpy)]₂[Zn(HPO₄)₂(PO₄)₆(MoO₂)₁₂(OH)₆] · 4H₂O (3), (H₂bpy)₂[Cd(bpy)(H₂O)]₂[Cd(bpy)(H₂O)₂]₂[Cd(HPO₄)₄(PO₄)₄(MoO₂)₁₂(OH)₆] · 2H₂O (4) (bpy = 4,4′-bipyridine), have been synthesized and characterized by elemental analyses, IR, TG, and single crystal X-ray diffraction. The 3-D framework of 1 is constructed from Co[P₄Mo₆]₂ dimers bonded together with [Co(bpy)]_n coordination polymer chains. In compound 2, the Co[P₄Mo₆]₂ dimers are linked by both [Co(bpy)] complex chains and the cobalt dimers to form a 3-D framework. Compounds 1 and 2 represent the first examples of reduced molybdenum(V) phosphates decorated with transition metal complexes chains. The 3-D framework of 3 is constructed from Zn[P₄Mo₆]₂ dimers bonded together with [Zn(bpy)] coordination complexes and [Zn(bpy)(H₂O)₂] complexes. In compound 4, the Cd[P₄Mo₆]₂ dimers are coordinated with [Cd(bpy)(H₂O)] and [Cd(bpy)(H₂O)₂] complexes to construct a 3-D structure. To our best knowledge, it is the first time that linear ligand 4,4′-bpy molecules have been grafted into the backbone of reduced molybdenum phosphates. Furthermore, the magnetic properties of compounds 1 and 2 are reported.     

Ultrafast excited-state dynamics of photoisomerizing complexes fac-[Re(Cl)(CO)3(papy)2] and fac-[Re(papy)(CO)3(bpy)] (papy = trans-4-phenylazopyridine)

The character and dynamics of low-lying electronic excited states of the complexes fac-[Re(Cl)(CO)₃(papy)₂] and fac-[Re(papy)(CO)₃(bpy)]⁺ (papy = trans-4-phenylazopyridine) were investigated using stationary (UV-Vis absorption, resonance Raman) and ultrafast time-resolved (visible, IR absorption) spectroscopic methods. Excitation of [Re(Cl)(CO)₃(papy)₂] at 400 nm is directed to ¹ππ^∗(papy) and Re → papy ¹MLCT excited states. Ultrafast (?1.4 ps) intersystem crossing (ISC) to ³nπ^∗(papy) follows. Excitation of [Re(papy)(CO)₃(bpy)]⁺ is directed to ¹ππ^∗(papy), ¹MLCT(papy) and ¹MLCT(bpy). The states ³nπ^∗(papy) and ³MLCT(bpy) are then populated simultaneously in less then 0.8 ps. The ³MLCT(bpy) state decays to ³nπ^∗(papy) with a 3 ps time constant. ³nπ^∗(papy) is the lowest excited state for both complexes. It undergoes vibrational cooling and partial rotation around the -NN- bond, to form an intermediate with a nonplanar papy ligand in less than 40 ps. This species then undergoes ISC to the ground state potential energy surface, on which the trans and cis isomers are formed by reverse and forward intraligand papy rotation, respectively. This process occurs with a time constant of 120 and 100 ps for [Re(Cl)(CO)₃(papy)₂] and [Re(papy)(CO)₃(bpy)]⁺, respectively. It is concluded that coordination of papy to the Re center accelerates the ISC, switching the photochemistry from singlet to triplet excited states. Comparison with analogous 4-styrylpyridine complexes (M. Busby, P. Matousek, M. Towrie, A. Vl?ek Jr., J. Phys. Chem. A 109 (2005) 3000) reveals similarities of the decay mechanism of excited states of Re complexes with ligands containing -NN- and -CC- bonds. Both involve sub-picosecond ISC to triplets, partial rotation around the double bond and slower ISC to the trans or cis ground state. This process is about 200 times faster for the -NN- bonded papy ligand. The intramolecular energy transfer from the ³MLCT-excited ^∗Re(CO)₃(bpy) chromophore to the intraligand state of the axial ligand occurs for both L = stpy and papy with a comparable rate of a few ps.     

Strong and weak coupling in mixed-valence complexes bridged by 4,4′-azo-di(phenylcyanamido)

The complexes [{Ru(tpy^∗)(bpy)}₂(μ-adpc)][PF₆]₂ where tpy^∗ is 4,4′,4″-tri-(tert-butyl)-2,2′:6′,2″-terpyridine, bpy is 2,2′-bipyridine, and adpc²⁻ is 4,4′-azo-diphenylcyanamide dianion and trans,trans-[{Ru(tpy^∗)(pc)}₂(μ-adpc)] where pc⁻ is 2-pyrazine-carboxylato were prepared and characterized by cyclic voltammetry and spectroelectrochemical methods. Intervalence band properties and IR spectroelectrochemistry of the mixed-valence complexes [{Ru(tpy^∗)(bpy)}₂(μ-adpc)]³⁺ and trans,trans-[{Ru(tpy^∗)(pc)}₂(μ-adpc)]⁺ are consistent with delocalized and valence-trapped mixed-valence properties respectively. The reduction in mixed-valence coupling upon substituting a bipyridine ligand with 2-pyrazine carboxylato strongly suggests that hole-transfer superexchange is the dominant mechanism for metal-metal coupling in these complexes.     

Interactions of molybdocene dichloride with histidine- and methionine-containing peptides

The reaction behavior of the antitumor active metallocene dihalide Cp₂MoCl₂ (Cp = η⁵-cyclopentadienyl) towards AcHis, AcHis(1-Me), AcHis(3-Me), His-Gly, AcHis-Gly-His, AcMet, Gly-Met-Gly and cyclo-Met-Met has been studied in solution at 2.5 ? pD ? 7.4 by using ¹H NMR spectroscopy. The histidine-containing substrates were found to bind the Cp₂Mo²⁺ unit through the terminal carboxylate group or through the N1 nitrogen of the imidazole ring, depending on the pD value. At physiological pH, coordination takes place exclusively at the imidazole ring with the percentage of Cp₂Mo²⁺-His adducts in 1:1 mixtures being about 70%. By contrast, the thioether group in the side chain of methionine has a very low affinity for the Cp₂Mo²⁺ group. Monodentate S-coordination could not be detected. For AcMet, binding through the carboxylate group was observed as the only coordination mode, while in the case of Gly-Met-Gly Mo-S interaction occurs in combination with carboxylate coordination leading to a S,O-macrochelate in low yield. Coordination to methionine peptides only takes place at pD ? 6, while at physiological pH interactions with the weak donor sites are not observed due to predominating dimerization of [Cp₂Mo(H₂O)(OH)]⁺ to [Cp₂Mo(μ-OH)₂MoCp₂]²⁺. At c(Cl⁻) = 100 mM competitive Cl⁻ coordination reduces the amount of carboxylate and S,O-coordination significantly, while imidazole coordination is not affected.     

New rhodium complexes of the tetradentate ligand bis(diacetylmonoxime-imino)propane 1,3 (H2dopn): synthesis and crystal structure of trans-[Rh(Hdopn)Cl]2 and trans-[Rh(Hdopn)(I)2]

The reaction between [Rh(H₂O)₆](ClO₄)₃ and the monoanion Hdopn⁻ (H₂dopn=bis(diacetylmonoxime-imino)propane 1,3=3,9-dimethyl-4,8-diazaundeca-3,8-diene-2,10-dione dioxime) afforded a new dimeric rhodium(II) compound of formula [Rh(Hdopn)(H₂O)]₂(ClO₄)₂ · H₂O (1). Treatment of methanolic solution of 1 with NaX (X=Cl⁻, Br⁻, I⁻) results in the replacement of water with halides in 1, leading to the formation of [Rh(Hdopn)X]₂ rhodium(II) dimers. The X-ray crystal structure of [Rh(Hdopn)Cl]₂ · 0.5H₂O (2) was determined showing a [Rh(II)-Rh(II)] core. Upon the reaction of 1 with NaI carried out in air, [Rh(Hdopn)(I)₂] (3) was isolated and characterized by a single-crystal X-ray diffraction analysis.     

Reaction of a rhodium(I) carbonyl complex of a para-dimethylaminophenyl substituted diphosphine with methyl iodide and hydrogen iodide

Reaction of [Rh(CO)₂](μ-Cl)]₂ with bis-1,2-(di{4-dimethylaminophenyl)phosphino-ethane (L) gives the monomeric Rh(I) complex of type cis-[RhCl(L)(CO)] that was separated from a side product of type [Rh(L)₂]Cl, and characterised by X-ray crystallography. This complex reacts with methyl iodide at high temperature to give the Rh(III) acetyl complex, [Rh(I)₂(C(O)Me)(L)], which was also structurally characterised by X-ray crystallography. There is no sign of quaternisation of the dimethylamino groups under these conditions. This complex is soluble in organic solvent and insoluble in the polar media used in methanol carbonylation (AcOH/H₂O/MeOH). However, in the presence of HI, this complex is readily soluble in AcOH/H₂O/MeOH, in contrast to [Rh(I)₂(C(O)Me)(dppe)] and most other Rh-acetyl complexes of diphosphine ligands.     

Reaction behavior of molybdocene dichloride towards ribonucleosides and ribonucleoside monophosphates: Rare example of sugar coordination

The coordination behavior of Cp₂Mo²⁺ towards the ribonucleosides and ribonucleoside monophosphates uridine, adenosine, cytidine, guanosine, 5′-UMP, 5′-AMP, 5′-CMP and 5′-GMP has been studied in solution in the range 4 ? pD ? 9 using NMR spectroscopy. The ribonucleosides were found to bind Cp₂Mo²⁺ exclusively through the ribose moiety giving rise to the chelate complexes [Cp₂Mo(urd-O2′,O3′)], [Cp₂Mo(ade-O2′,O3′)], [Cp₂Mo(cyd-O2′,O3′)], and [Cp₂Mo(gua-O2′,O3′)]. The ribonucleotides form three types of complex with Cp₂Mo²⁺ in neutral solution, namely N,PO-macrochelates, PO,O3′-coordinated species as well as O2′,O3′-chelates, while at pD 9 only sugar coordination is observed.     

Assembly of coordination networks: Role of the different M(II)-cysteate chain in structural diversification

In this paper, we have presented the synthesis and crystal structures of five coordination polymers, namely, {[Ni₂(cysteate)₂(bpy)₂(H₂O)₂]·3H₂O}_n (1), {[Cu₂(cysteate)₂(bpy)₂(H₂O)₂]·4H₂O}_n (2), {[Mn₂(cysteate)₂(bpy)(H₂O)₄](bpy)·H₂O}_n (3), {[Zn₂(cysteate)₂(bpy)(H₂O)₄](bpy)·H₂O}_n (4), {[Cd(cysteate)(bpy)(H₂O)]·4H₂O}_n (5), using homochiral l-cysteate and 4,4′-bipyridine (bpy) as mixed ligands, reacted with Ni(II), Cu(II), Mn(II), Zn(II) and Cd(II) ions, respectively. When different metal centers being used, l-cysteate gave rise to three different architectures based on coordination polymeric chains: (1) a helical chain, which is further connected by bpy pillars to generate a racemic twofold 3D (4².8⁴)-lvt net in 1 and 2; (2) a zigzag chain, which is further linked by bpy pillars into a homochiral 2D brick-wall structure in 3 and 4; (3) a zigzag chain, which is further linked by bpy pillars into a homochiral 2D 4⁴ grid network in 5. These results indicate that the metal-directed M(II)-cysteate chain has an important effect on the structural diversification of such complexes.     

Aqueous Speciation of ansa- and non-ansa- Substituted [Cp2Mo(μ-OH)]2[OTs]2

Titration curves were measured for three molybdocene dimers, [Cp₂Mo(μ-OH)]₂[OTs]₂ (4), [Mo(μ-OH)]₂[OTs]₂ (4′; Cp′ = C₅H₄CH₃), and ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ (4^a), and for two monomeric molybdocene complexes, Cp₂MoO (6) and Cp₂MoCl₂ (1). The titration curves for 4, 6, and 1 were identical and showed three equivalence points each. The titration curve for 4′ was also similar in appearance but the equivalence points were shifted higher by ∼0.3, as expected for the more electron-rich Mo center in this molecule. The titration curve for the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex showed only two equivalence points. Two of the equivalence points observed in the titration of 4, 6, and 1 were previously reported in potentiometric measurements of aqueous solutions of Cp₂MoCl₂ and were attributed to the Cp₂Mo(OH₂)²⁺ species (pK_a = 5.5 ± 0.1 and 8.3 ± 0.2). The third equivalence point (pK_a = 2.2 ± 0.2) is assigned to protonation/deprotonation of the [Cp₂Mo(μ-OH)]₂[OTs]₂/[Cp₂Mo(μ-OH₂)(μ-OH)MoCp₂]³⁺ dimer. A new equilibrium scheme is proposed for the aquated molybdocenes to provide a more complete picture of the aqueous speciation of the non-ansa molybdocene complexes, specifically by accounting for the third acidic proton in the titration curves and by describing the hydrolysis of Cp₂MoO. Although the titration curve of the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex is different from that of [Cp₂Mo(μ-OH)]₂[OTs]₂, ¹H NMR data suggest that the aqueous speciation of the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex is analogous to that of the non-ansa molybdocenes.     

Structural properties and inversion mechanisms of [Rh(dippe)(μ-SR)]2 complexes

Several new bis-thiolate complexes of the type [Rh(dippe)(μ-SR)]₂ where R=H, methyl, cyclohexyl, o-biphenyl, and phenyl, or (SR)₂SCH₂CH₂CH₂S have been synthesized and characterized by NMR spectroscopy and single crystal X-ray diffraction. All [Rh(dippe)(μ-SR)]₂ complexes except [Rh(dippe)(μ-SPh)]₂ exhibit bent geometries, while the orientation of the thiolato substituents changes with increasing steric bulk. ¹H and ³¹P NMR spectroscopies indicate that both ring inversion and sulfur inversion occur among the members of the series, which allows them to access several isomeric forms when they are in solution. ³¹P NMR spectroscopy indicates that sulfur inversion in [Rh(dippe)(μ-SH)]₂, [Rh(dippe)(μ-Sbiphenyl)]₂, and [Rh(dippe)(μ-SPh)]₂ is a non-dissociative process.     

Synthetic, structural and spectroscopic studies of complexes derived from the copper(II) perchlorate/succinamic acid/N,N′-donor tertiary reaction systems

The use of succinamic acid (H₂sucm) in Cu(ClO₄)₂·6H₂O/N,N′-donor [2,2′-bipyridine (bpy), 1,10-phenanthroline (phen), 4,4′-dimethyl-2,2′-bipyridine (dmbpy), 4,4′-bipyridine (4,4′-bpy)] reaction mixtures yielded compounds [Cu₂(Hsucm)₃(bpy)₂](ClO₄)·0.5MeOH (1·0.5MeOH), [Cu₂(Hsucm)(OH)(H₂O)(bpy)](ClO₄)₂ (2), [Cu₄(Hsucm)₅(dmbpy)₄]_n(ClO₄)_3n·nH₂O ·0.53nMeOH (3·nH₂O·0.53nMeOH), [Cu₂(Hsucm)₂(dmbpy)₂(H₂O)₂](ClO₄)₂·2H₂O (4·2H₂O), [Cu₂(Hsucm)₂(phen)₂(H₂O)₂](ClO₄)₂·1.8MeOH (5·1.8MeOH), [Cu₂(Hsucm)₂(phen)₂(MeOH)₂](ClO₄)₂·MeOH (6·MeOH) and [Cu(Hsucm)₂(H₂O)(4,4′-bpy)]_n (7). The succinamate(−1) ligand exists in five different coordination modes in the structures of 1-7, i.e. the common syn, syn μ₂-κO:κO′ in 1-6, the μ₂-κ²O in 1, the μ₂-κ²O:κO′ in 1, the μ₃-κ²O:κ²O′ in 3, and the monodentate κO in 7. The primary amide group of Hsucm⁻ remains uncoordinated and participates in intra- and intermolecular hydrogen bonding interactions leading to interesting crystal structures. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the Hsucm⁻ ligands. The thermal decomposition of representative complexes was monitored by TG/DTG and DTA measurements.     

Extraction properties for alkali metal picrates of macrocyclic trinuclear (p-cymene)ruthenium(II) and (pentamethylcyclopentadienyl)rhodium(III) complexes

The solvent extraction properties of macrocyclic trinuclear organometallic complexes, [(p-cymene)Ru(pyO₂)]₃ and [Cp^∗Rh(pyO₂)]₃, for Li⁺, Na⁺, and K⁺ picrates have been investigated in a dichloromethane-water system at 25 °C. The extraction rates of the alkali metal picrates with these macrocyclic complex ligands are unusually slow; the shaking times required to attain equilibrium are at least 1 h for [(p-cymene)Ru(pyO₂)]₃ and 20-40 h for [Cp^∗Rh(pyO₂)]₃. From analysis of the equilibrium data, the extraction constants (K_ex = [ML⁺A⁻]_o/[M⁺][L]_o[A⁻]; M⁺ = alkali metal ion, L = macrocyclic ligand, A⁻ = picrate ion, o = organic phase) have been determined. The log K_ex value varies in the sequences, Li⁺ (5.72) > Na⁺ (4.50) > K⁺ (2.88) for [(p-cymene)Ru(pyO₂)]₃ and Li⁺ (4.79) > Na⁺ (2.70) ≈ K⁺ (2.69) for [Cp^∗Rh(pyO₂)]₃. The K_ex values of 6,6-dibenzyl-14-crown-4 (DBz14C4), which is one of the best Li⁺-selective crown ethers, have also been determined for comparison. It is revealed that [Cp^∗Rh(pyO₂)]₃ is much superior to DBz14C4 both in the extractability for Li⁺ and the selectivity for Li⁺ over Na⁺.