Synthesis and reactivity of osmium (VI) nitrido complexes containing pyridine-carboxylato ligands

A series of osmium(VI) nitrido complexes containing pyridine-carboxylato ligands Os^VI(N)(L)₂X (L = pyridine-2carboxylate (1), 2-quinaldinate (2) and X = Cl (a), Br (1b and 2c) or CH₃O (2b)) and [Os^VI(N)(L)X₃]⁻ (L = pyridine-2,6-dicarboxylate (3) and X = Cl (a) or Br (b)) have been synthesised. Complexes 1 and 2 are electrophilic and react readily with various nucleophiles such as phosphine, sulfide and azide. Reaction of Os^VI(N)(L)₂X (1 and 2) with triphenylphosphine produces the osmium(IV) phosphiniminato complexes Os^VI(NPPh₃)(L)₂X (4 and 5). The kinetics of nitrogen atom transfer from the complexes Os^VI(N)(L)₂Br (2c) (L = 2-quinaldinate) with triphenylphosphine have been studied in CH₃CN at 25.0 °C by stopped-flow spectrophotometric method. The following rate law is obtained: −d[Os(VI)]/dt = k₂[Os(VI)][PPh₃]. Os^VI(N)(L)₂Cl (L = 2-quinaldinate) (2a) reacts also with [PPN](N₃) to give an osmium(III) dichloro complex, trans-[PPN][Os^III(L)₂Cl₂] (6). Reaction of Os^VI(N)(L)₂Cl (L = 2-quinaldinate) (2a) with lithium sulfide produces an osmium(II) thionitrosyl complex Os^II(NS)(L)₂Cl (7). These complexes have been structurally characterised by X-ray crystallography.     

Synthesis and structural characterization of dimolybdenum(IV) and molybdenum(VI) complexes with trisbenzenethiolatophosphine ligands

The synthesis and crystal structures of two high valent molybdenum complexes containing trisbenzenethiolatophosphine ligands, [Mo₂(PS3)₂(PS3H)] (1) and [Mo(PS3″)₂] (2), where PS3 = [P(C₆H₄-2-S)₃]³⁻, PS3H = [P(C₆H₄-2-S)₂(C₆H₄-2-SH)]²⁻, and PS3″ = [P(C₆H₃-3-Me₃Si-2-S)₃]³⁻, are described. Compound 1 is a dimeric Mo(IV) species containing three PS3 ligands with an uncoordinated thiol group. An intramolecular hydrogen bonding S-H?S was found in the structure. Two molybdenum ions are bridged by three thiolates. The geometry can be described as two pentagonal bipyramids sharing a triangle face formed by three bridging S atoms. Compound 2 is a Mo(VI) species binding with two tetradentate PS3″ ligands. The eight-coordinate molybdenum center adopts a dodecahedral geometry.     

Self-assembly of four three-dimensional reduced molybdenum(V) phosphates decorated with transitional metal complexes

Four new three-dimensional materials built from reduced molybdenum(V) phosphates as building blocks and transitional metal (Co, Zn and Cd) complexes as linkers, (Hbpy)₂[Co(bpy)(H₂O)]₂[Co(H₂PO₄)₂ (HPO₄)₆(MoO₂)₁₂(OH)₆] (1), [Co(H₂O)₄]₂[Co(Hbpy)(H₂O)]₂[Co(bpy)][Co(HPO₄)₄(PO₄)₄(MoO₂)₁₂(OH)₆] · 6H₂O (2), Na₂[Zn(Hbpy)(H₂O)₂]₂[Zn(Hbpy)]₂[Zn(HPO₄)₂(PO₄)₆(MoO₂)₁₂(OH)₆] · 4H₂O (3), (H₂bpy)₂[Cd(bpy)(H₂O)]₂[Cd(bpy)(H₂O)₂]₂[Cd(HPO₄)₄(PO₄)₄(MoO₂)₁₂(OH)₆] · 2H₂O (4) (bpy = 4,4′-bipyridine), have been synthesized and characterized by elemental analyses, IR, TG, and single crystal X-ray diffraction. The 3-D framework of 1 is constructed from Co[P₄Mo₆]₂ dimers bonded together with [Co(bpy)]_n coordination polymer chains. In compound 2, the Co[P₄Mo₆]₂ dimers are linked by both [Co(bpy)] complex chains and the cobalt dimers to form a 3-D framework. Compounds 1 and 2 represent the first examples of reduced molybdenum(V) phosphates decorated with transition metal complexes chains. The 3-D framework of 3 is constructed from Zn[P₄Mo₆]₂ dimers bonded together with [Zn(bpy)] coordination complexes and [Zn(bpy)(H₂O)₂] complexes. In compound 4, the Cd[P₄Mo₆]₂ dimers are coordinated with [Cd(bpy)(H₂O)] and [Cd(bpy)(H₂O)₂] complexes to construct a 3-D structure. To our best knowledge, it is the first time that linear ligand 4,4′-bpy molecules have been grafted into the backbone of reduced molybdenum phosphates. Furthermore, the magnetic properties of compounds 1 and 2 are reported.     

Oxoperoxo molybdenum(VI)- and tungsten(VI) complexes with 1-(2′-hydroxyphenyl) ethanone oxime: Synthesis, structure and catalytic uses in the oxidation of olefins, alcohols, sulfides and amines using H2O2 as a terminal oxidant

High yield synthesis of two new oxodiperoxo-molybdate, PPh₄[MoO(O₂)₂(HPEOH)] (1), and -tungstate, PPh₄[WO(O₂)₂(HPEOH)] (2), complexes with 1-(2′-hydroxyphenyl) ethanone oxime (HPEOH₂) as organic ligand has been achieved by adding methanol solution of the ligand to the pale-yellow solution obtained by dissolving molybdic-/tungstic-acid (freshly prepared) in hydrogen peroxide and precipitating the complexes using tetraphenylphosphonium chloride. The orange-yellow complexes have been characterized by elemental analysis, IR, ¹H NMR, UV-Vis spectroscopy and finally by X-ray structure analysis. Both the complexes function as facile olefin epoxidation catalysts with hydrogen peroxide as terminal oxidant and bicarbonate as a co-catalyst at room temperature. Catalytic potentiality of 1 and 2 is also exhibited in the case of oxidation of alcohols, amines and sulfides. The catalysts are very much efficient especially in olefin epoxidation giving high yield, TON (turnover number) and TOF (turnover frequency). The method described is environmentally benign and cost-effective in all the cases.     

Copper(II) complexes derived from tripodal tris[(2-ethyl-(1-pyrazolyl)]amine

Three mono-nuclear copper(II) complexes [Cu(tepza)X]ClO₄ (X = Cl, 1; X = NCS, 2; X = dca, 3) and two dinuclear bridging complexes [Cu₂(tepza)₂(μ-C₄O₄)](ClO₄)₂·H₂O(4) and [Cu₂(tepza)₂(μ-C₅O₅)](ClO₄)₂(5) where tepza = tris[2-ethyl(1-pyrazolyl)]amine, dca = dicyanamide, C₄O₄²⁻ = 3,4-dihydroxycyclobut-3-ene-1,2-dionate (squarate dianion) and C₅O₅²⁻ = 4,5-dihydroxycyclopent-4-ene-1,2,3-trionate (croconate dianion) were synthesized and structurally characterized by IR and UV-Vis spectroscopy as well as by single X-ray crystallography. In the solid state, the geometry of copper(II) centers in these complexes are as follows: close to SP in 2, distorted TBP in 3, predominant SP in 4, and distorted octahedral in 5, whereas in solution distorted SP geometry was generally found. The squarato and the croconato dianions in complexes 4 and 5 are bridging the two copper(II) centers in cis-bis-monodentate and bis-bidentate bonding modes, respectively. Magnetic susceptibility measurements at variable temperatures (2-300 K) reveal the weak antiferromagnetic coupling in the two bridging dinuclear complexes 4 (J = −24.9 cm⁻¹) and 5 (J = −3.1 cm⁻¹).     

fac-/mer-[RuCl3(NO)(P-N)] (P-N = [o-(N,N-dimethylamino)phenyl]diphenylphosphine): Synthesis, characterization and DFT calculations

Complex fac-[RuCl₃(NO)(P-N)] (1) was synthesized from the reaction of [RuCl₃(H₂O)₂(NO)] and the P-N ligand, o-[(N,N-dimethylamino)phenyl]diphenylphosphine) in refluxing methanol solution, while complex mer,trans-[RuCl₃(NO)(P-N)] (2) was obtained by photochemical isomerization of (1) in dichloromethane solution. The third possible isomer mer,cis-[RuCl₃(NO)(P-N)] (3) was never observed in direct synthesis as well as in photo- or thermal-isomerization reactions. When refluxing a methanol solution of complex (2) a thermally induced isomerization occurs and complex (1) is regenerated.The complexes were characterized by NMR (³¹P{¹H}, ¹⁵N{¹H} and ¹H), cyclic voltammetry, FTIR, UV-Vis, elemental analysis and X-ray diffraction structure determination. The ³¹P{¹H} NMR revealed the presence of singlet at 35.6 for (1) and 28.3 ppm for (2). The ¹H NMR spectrum for (1) presented two singlets for the methyl hydrogens at 3.81 and 3.13 ppm, while for (2) was observed only one singlet at 3.29 ppm. FTIR Ru-NO stretching in KBr pellets or CH₂Cl₂ solution presented 1866 and 1872 cm⁻¹ for (1) and 1841 and 1860 cm⁻¹ for (2). Electrochemical analysis revealed a irreversible reduction attributed to Ru^II-NO⁺ → Ru^II-NO⁰ at −0.81 V and −0.62 V, for (1) and (2), respectively; the process Ru^II → Ru^III, as expected, is only observed around 2.0 V, for both complexes.Studies were conducted using ¹⁵NO and both complexes were isolated with ¹⁵N-enriched NO. Upon irradiation, the complex fac-[RuCl₃(NO)(P-N)] (1) does not exchange ¹⁴NO by ¹⁵NO, while complex mer,trans-[RuCl₃(NO)(P-N)] (2) does. Complex mer,trans-[RuCl₃(¹⁵NO)(P-N)] (2′) was obtained by direct reaction of mer,trans-[RuCl₃(NO)(P-N)] (2) with ¹⁵NO and the complex fac-[RuCl₃(¹⁵NO)(P-N)] (1′) was obtained by thermal-isomerization of mer,trans-[RuCl₃(¹⁵NO)(P-N)] (2′).DFT calculation on isomer energies, electronic spectra and electronic configuration were done. For complex (1) the HOMO orbital is essentially Ru (46.6%) and Cl (42.5%), for (2) Ru (57.4%) and Cl (39.0%) while LUMO orbital for (1) is based on NO (52.9%) and is less extent on Ru (38.4%), for (2) NO (58.2%) and Ru (31.5%).     

Study of the cytotoxic activity of di and triphenyltin(IV) carboxylate complexes

The reaction of 3-methoxyphenylacetic acid (3-MPAH), 4-methoxyphenylacetic acid (4-MPAH), 2,5-dimethyl-3-furoic acid (DMFUH) or 1,4-benzodioxane-6-carboxylic acid (BZDOH) with triphenyltin(IV) chloride (1:1) or diphenyltin(IV) dichloride (2:1) in the presence of triethylamine yielded the compounds [SnPh₃(3-MPA)] (1), [SnPh₃(4-MPA)] (2), [SnPh₃(DMFU)] (3), [SnPh₃(BZDO)] (4), [SnPh₂(3-MPA)₂] (5), [SnPh₂(4-MPA)₂] (6), [SnPh₂(DMFU)₂] (7) and [SnPh₂(BZDO)₂] (8), respectively. The tetranuclear complex [{Me₂(DMFU)SnOSn(DMFU)Me₂}₂] (9) was prepared by the reaction of dimethyltin(IV) oxide and 2,5-dimethyl-3-furoic acid (DMFUH). The molecular structures of 3, 4 and 9, were determined by X-ray diffraction studies. The cytotoxic activity of the carboxylic acids (3-MPAH, 4-MPAH, BZDOH and DMFUH) and di (5-8) and triphenyltin(IV) complexes (2-4) was tested against tumor cell lines human adenocarcinoma HeLa, human myelogenous leukemia K562, human malignant melanoma Fem-x and normal immunocompetent cells, peripheral blood mononuclear cells PBMC. Triphenyltin(IV) complexes show higher activities than the diphenyltin(IV) derivatives. The most active compound is [SnPh₃(DMFU)] (3) with IC₅₀ value of 0.15 ± 0.01, 0.051 ± 0.004, 0.074 ± 0.004, 0.20 ± 0.01, 0.15 ± 0.02 on HeLa, K562, Fem-x, rested and stimulated PBMC, respectively, while the most selective are [SnPh₂(3-MPA)₂] (5), [SnPh₂(DMFU)₂] (7) and [SnPh₂(BZDO)₂] (8). Compounds 3, 5, 7 and 8 present higher activities than cisplatin in all the tested cells and relative high selectivity especially on K562 cells.     

Synthesis, DNA-binding and photocleavage studies of ruthenium complexes [Ru(bpy)2(mitatp)] and [Ru(bpy)2(nitatp)]

Two new ruthenium complexes [Ru(bpy)₂(mitatp)](ClO₄)₂1 and [Ru(bpy)₂(nitatp)](ClO₄)₂2 (bpy = 2,2′-bipyridine, mitatp = 5-methoxy-isatino[1,2-b]-1,4,8,9-tetraazatriphenylene, nitatp = 5-nitro-isatino[1,2-b]-1,4,8,9-tetraazatriphenylene) have been synthesized and characterized by elemental analysis, ¹H NMR, mass spectrometry and cyclic voltammetry. Spectroscopic and viscosity measurements proved that the two Ru(II) complexes intercalate DNA with larger binding constants than that of [Ru(bpy)₂(dppz)]²⁺ (dppz = dipyrido[3,2-a:2′,3′-c]phenazine) and possess the excited lifetime of microsecond scale upon binding to DNA. Both complexes can efficiently photocleave pBR322 DNA in vitro under irradiation. Singlet oxygen (¹O₂) was proved to contribute to the DNA photocleavage process, the ¹O₂ quantum yields was determined to be 0.43 and 0.36 for 1 and 2, respectively. Moreover, a photoinduced electron transfer mechanism was also found to be involved in the DNA cleavage process.     

New molybdenum(V) complexes based on the {Mo2O4} structural core with esters or anions of malonic and succinic acid

A series of malonato complexes of molybdenum(V) was prepared by reacting (PyH)₅[MoOCl₄(H₂O)]₃Cl₂ or (PyH)_n[MoOBr₄]_n with malonic acid (H₂mal) or a half-neutralized acid, hydrogen malonate (Hmal⁻), at ambient conditions: (PyH)₃[Mo₂O₄Cl₄(μ₂-Hmal)] · CH₃CN (1), (PyH)₃[Mo₂O₄Br₄(μ₂-Hmal)] · CH₃CN (2), (PyH)₂[Mo₂O₄Cl(η²-mal)(μ₂-Hmal)Py] (3), (3,5-LutH)₂(H₃O) [Mo₂O₄(η²-mal)₂(μ₂-Hmal)] (4), (PyH)[Mo₂O₄Cl₂(μ₂-Memal)Py₂] (5), (3,5-LutH)[Mo₂O₄Cl₂(μ₂-Memal)(3,5-Lut)₂] (6), (PyH)[Mo₂O₄Cl₂(μ₂-Etmal)Py₂] (7), (3,5-LutH)[Mo₂O₄Cl₂(μ₂-Prmal)(3,5-Lut)₂] (8) and [{Mo₂O₄(μ₂-Memal)Py₂}₂(μ₂-OCH₃)₂] (9) (where Py = pyridine, C₅H₅N; PyH⁺ = pyridinium cation, C₅H₅NH⁺; 3,5-Lut = 3,5-lutidine, C₇H₉N; 3,5-LutH⁺ = 3,5-lutidinium cation, C₇H₉NH⁺; mal²⁻ = malonate, ⁻OOCCH₂COO⁻; Memal⁻ = monomethyl malonate, ⁻OOCCH₂COOCH₃; Etmal⁻ = monoethyl malonate, ⁻OOCCH₂COOC₂H₅ and Prmal⁻ = monopropyl malonate, ⁻OOCCH₂COOC₃H₇). The complex anions of compounds 1-8 have a common structural feature: a dinuclear, singly metal-metal bonded {Mo₂O₄}²⁺ core with the carboxylate moiety of the malonato ligand coordinated in a syn-syn bidentate bridging manner to the pair of metal atoms. The remaining four coordination sites of the {Mo₂O₄}²⁺ core are occupied with halides in 1 and 2, with halides/pyridine ligands in 5-8, with a pair of bidentate malonate ions in 4 and with the combination of all in 3. The neutral molecules of 9 consist of two {Mo₂O₄}²⁺ cores linked with a pair of methoxide ions into a chain-like, tetranuclear cluster. An esterification of malonic acid was observed to take place in the reaction mixtures containing alcohols. Solvothermal reactions with malonic acid carried out at 115 °C produced anionic acetato complexes as found in (PyH)[Mo₂O₄Cl₂(μ₂-OOCCH₃)Py₂] · Py (10), (PyH)[Mo₂O₄Cl₂(μ₂-OOCCH₃)Py₂] (11), (3,5-LutH)[Mo₂O₄Cl₂(μ₂-OOCCH₃)(3,5-Lut)₂] (12) and (4-MePyH)₃[Mo₂O₄Cl₂(μ₂-OOCCH₃)(4-MePy)₂]₂Cl (13) (4-MePy = 4-methylpyridine, C₆H₇N). The acetate coordinated in the syn-syn bidentate bridging mode in all. Reactions of (PyH)₅[MoOCl₄(H₂O)]₃Cl₂ with succinic acid (H₂suc) at ambient conditions resulted in a complex with a half-neutralized acid, (PyH)[Mo₂O₄Cl₂(μ₂-Hsuc)Py₂] · Py (14) (Hsuc⁻ = hydrogen succinate, ⁻OOC(CH₂)₂COOH), while those carried out at 115 °C in a tetranuclear succinato complex, (4-MePyH)₂[{Mo₂O₄Cl₂(4-MePy)₂}₂(μ₄-suc)] (15) (suc²⁻ = succinate, ⁻OOC(CH₂)₂COO⁻). The tetranuclear anion of 15 consists of two {Mo₂O₄}²⁺ cores covalently linked with a tetradentate succinato ligand. The compounds were fully characterized by infrared vibrational spectroscopy, elemental analyses and X-ray diffraction studies.     

Synthesis and spectroscopic characterization of organotin(IV) complexes with 2-benzoylpyridine-N(4)-cyclohexylthiosemicarbazone (HBPCT): X-ray crystal structure of [PhSnCl2(BPCT)]

The reaction of 2-benzoylpyridine-N(4)-cyclohexylthiosemicarbazone [HBPCT, (1)] ligand with organotin(IV) chloride(s) lead to the formation of three new organotin(IV) complexes: [MeSnCl₂(BPCT)] (2), [PhSnCl₂(BPCT)] (3) and [Ph₂SnCl(BPCT)] (4). The ligand (1) and its organotin(IV) complexes (2-4) have been synthesized and characterized by CHN analyses, molar conductivity, UV-Vis, FT-IR and ¹H NMR spectral studies. The single crystal X-ray diffraction studies indicated that [PhSnCl₂(BPCT)] (3) is six coordinated and adopts strongly a distorted octahedral configuration with the coordination through pyridine-N, azomethine-N and thiolato-S atoms of the ligand. The crystal system of [PhSnCl₂(BPCT)] (3) is orthorhombic with space group P2ac2n and the unit cell dimensions: a = 28.1363(5) Å, b = 9.5970(2) Å, c = 9.4353(2) Å.     

X-ray structure and magnetic properties of dinuclear and polymer iron(II) complexes

Five new octahedral iron(II) complexes [FeL2(4-dpa)]_n(EtOH) (1), [FeL2(bipy)]_n(DMF) (2), [FeL1(bpee)]_n (3), [Fe₂L3(1-meim)₄](1-meim)₄ (4) and [FeL1(DMAP)₂] (5), with L1 and L2 being tetradentate coordinating Schiff base like ligands (L1 = (E,E)-[{diethyl-2,2′-[1,2-phenylenebis(iminomethylidyne)]bis[3-oxobutanato](2-)-N,N′,O³,O³′}, L2 = (3,3′)-[{1,2-phenylenebis(iminomethylidyne)]bis(2,4-pentane-dionato)(2-)-N,N′,O²,O²′}) and L3 being a octadentate dinucleating coordinating Schiff base like ligand ({tetraethyl-(E,E,E,E)-2,2′,2′′,2′′′-[1,2,4,5-phenylentetra(iminomethylidine)]tetra[3-oxobutanoato](2-)-N,N′,N′′,N′′′,O³,O³′,O³′′,O³′′′}); 4-dpa = di(4-picolyl)-amine, bipy = 4,4′-bipyridine, bpee = trans-1,2-bis(4-pyridyl)ethylene, 1-meim = 1-methylimidazole and DMAP = 4-dimethylaminopyridine, have been synthesized and characterised using X-ray structure analysis and T-dependent susceptibility measurements. Both methods indicate that all iron(II) centres are in the paramagnetic high-spin state over the whole temperature range investigated. The O-Fe-O angle, the so called bit of the equatorial ligand, is with an average of 111° in the region typical for high-spin iron(II) complexes of this ligand type. In the case of compound 1 an infinite two-dimensional hydrogen bond network can be found, for the compounds 2-4 no hydrogen bond interactions are observed between the complex molecules. A comparison of the curve progression obtained from the magnetic measurements of the mononuclear complex 5 and the polymeric complexes 1-3 leads to the conclusion that no magnetic interactions are mediated over the bridging axial ligands. For the dinuclear complex 4 weak antiferromagnetic interactions between the two iron centres are found.     

Synthesis and structure of iron (III) and iron (II) complexes in S4P2 environment created by diethyldithiocarbamate and 1,2-bis(diphenylphosphino)ethane chelation: Investigation of the electronic structure of the complexes by Mössbauer and magnetic studies

Iron (II) and iron (III) complexes, [Fe^II(DEDTC)₂(dppe)] · CH₂Cl₂ (1), [Fe^II(ETXANT)₂(dppe)] (2) (DEDTC = diethyldithiocarbamate, ETXANT = ethyl xanthate, dppe = 1,2-bis (diphenylphosphino) ethane), and [Fe^III(DEDTC)₂(dppe)] [Fe^IIICl₄] (3) have been synthesized and characterized. Since 3 contains two magnetic centers, an anion metathesis reaction has been conducted to replace the tetrahedral FeCl₄⁻ by a non-magnetic BPh₄⁻ ion producing [Fe^III(DEDTC)₂(dppe)]BPh₄ (4) for the sake of unequivocal understanding of the magnetic behavior of the cation of 3. With the similar end in view, the well-known FeCl₄⁻ ion, the counter anion of 3, is trapped as PPh₄[Fe^IIICl₄] (5) and its magnetic property from 298 to 2 K has been studied. Besides the spectroscopic (IR, UV-Vis, NMR, EPR, Mass and XPS) characterization of the appropriate compounds, especially 2, others viz. 1, 3 and 4 have been structurally characterized by X-ray crystallography. While Fe^II complexes, 1 and 2, are diamagnetic, the Fe^III systems, namely the cations of 3, and 4 behave as low-spin (S = 1/2) paramagnetic species from 298 to 50 K. Below 50 K 3 shows gradual increase of χ_MT up to 2 K suggesting ferromagnetic behavior while 4 exhibits gradual decrease of magnetic moment from 60 to 2 K, indicating the occurrence of weak antiferromagnetic interaction. These conclusions are supported by the Mössbauer studies of 3 and 4. The Mössbauer pattern of 1 exhibits a doublet site for diamagnetic (2-400 K) Fe^II. The compounds 1, 2 and 4 encompass interesting cyclic voltammetric responses involving Fe^II, Fe^III and Fe^IV.     

Hydrogen-bonded copper(II) and nickel(II) complexes and coordination polymeric structures containing reduced Schiff base ligands

Complexes [Cu(HSas)(H₂O)] · 2H₂O (H₃Sas = N-(2-hydroxybenzyl)-l-aspartic acid) (1), [Cu(HMeSglu)(H₂O)] · 2H₂O (H₃MeSglu = (N-(2-hydroxy-5-methylbenzyl)-l-glutamic acid) (2), [Cu₂(Smet)₂] (H₂Smet = (N-(2-hydroxybenzyl)-l-methionine) (3), [Ni(HSas)(H₂O)] (4), [Ni₂(Smet)₂(H₂O)₂] (5), and [Ni(HSapg)₂] (H₂Sapg = (N-(2-hydroxybenzyl)-l-aspargine) (6) have been synthesized and characterized by chemical and spectroscopic methods. Structural determination by single crystal X-ray diffraction studies revealed 1D coordination polymeric structures in 2 and 4, and hydrogen-bonded network structure in 5 and 6. In contrast to previously reported coordination compounds with similar ligands, the phenol remains protonated and bonded to the metal ions in 2 and 4, and also probably in 1. However, the phenolic group is non-bonded in 6.     

Chromium(III) complexes with 2-(2′-pyridyl)imidazole: Synthesis, crystal structure and magnetic properties

The preparation, crystal structure and variable temperature-magnetic investigation of three 2-(2′-pyridyl)imidazole-containing chromium(III) complexes of formula PPh₄[Cr(pyim)(C₂O₄)₂]·H₂O (1), AsPh₄[Cr(pyim)(C₂O₄)₂]·H₂O (2) and [Cr₂(pyim)₂(C₂O₄)₂(OH₂)₂]·2pyim · 6H₂O (3) [pyim = 2-(2′-pyridyl)imidazole, , and ] are reported herein. The isomorphous compounds are made up of discrete [Cr(pyim)(C₂O₄)₂]⁻ anions, cations [X = P (1) and As (2)] and uncoordinated water molecules. The chromium environment in 1 and 2 is distorted octahedral with Cr-N and Cr-O bond distances varying in the ranges 2.040(3)-2.101(3) and 1.941(3)-1.959(3) Å, respectively. The angle subtended by the chromium(III) ion by the two didentate oxalate ligands cover the range 82.49(12)-82.95(12)°, values which are somewhat greater than those concerning the chelating pyim molecule [77.94(13) (1) and 78.50(13)° (2)]. Complex 3 contains discrete centrosymmetric [Cr₂(pyim)₂(C₂O₄)₂(OH)₂] neutral units where the two chromium(III) ions are joined by a di-μ-hydroxo bridge, the oxalate and pyim groups acting as peripheral didentate ligands. Uncoordinated water and pyim molecules are also present in 3 and they contribute to the stabilization of its structure by extensive hydrogen bonding and π-π type interactions. The values of the intramolecular chromium-chromium separation and angle at the hydroxo bridge in 3 are 2.9908(12) Å and 99.60(16)°, respectively. Magnetic susceptibility measurements of 1-3 in the temperature range 1.9-300 K show the occurrence of weak inter- (1 and 2) and intramolecular (3) antiferromagnetic couplings. The magnetic properties of 3 have been interpreted in terms of a temperature-dependent exchange integral, small changes of the angle at the hydroxo bridge upon cooling being most likely responsible for this peculiar magnetic behavior.     

Iron(III), chromium(III) and cobalt(II) complexes with squarate: Synthesis, crystal structure and magnetic properties

The preparation and variable temperature-magnetic investigation of three squarate-containing complexes of formula [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (1) [Cr₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (2) and [Co(C₄O₄)(H₂O)₄]_n (3) [H₂C₄O₄ = 3.4-dihydroxycyclobutene-1,2-dione (squaric acid)] together with the crystal structures of 1 and 3 are reported. Complex 1 contains discrete centrosymmetric [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄] diiron(II) units where the iron pairs are joined by a di-μ-hydroxo bridge and two squarate ligands acting as bridging groups through adjacent oxygen atoms. Two coordinated water molecules in cis position complete the octahedral environment at each iron atom in 1. The iron-iron distance with the dinuclear unit is 3.0722(6) Å and the angle at the hydroxo bridge is 99.99(7)°, values which compare well with the corresponding ones in the isostructural compound 2 (2.998 Å and 99.47°) whose structure was reported previously. The crystal structure of 3 contains neutral chains of squarato-O¹,O³-bridged cobalt(II) ions where four coordinated water molecules complete the six-coordination at each cobalt atom. The cobalt-cobalt separation across the squarate bridge is 8.0595(4) Å. A relatively important intramolecular antiferromagnetic coupling occurs in 1 whereas it is very weak in 2, the exchange pathway being the same [J = −14.4 (1) and −0.07 cm⁻¹ (2), the spin Hamiltonian being defined as ]. A weak intrachain antiferromagnetic interaction between the high-spin cobalt(II) ions occurs in 3 (J = −0.30 cm⁻¹). The magnitude and nature of these magnetic interactions are discussed in the light of their respective structures and they are compared with those reported for related systems.     

Synthesis and characterization of 8-quinolinolato vanadium(IV) complexes

Reaction of vanadium(III) chloride with 8-quinolinol (Hqn) gave a mononuclear vanadium(IV) complex, [VOCl₂(H₂O)₂] 1) · 2H₂qn · 2Cl · CH₃CN, and three dinuclear vanadium(IV) complexes: [V₂O₂Cl₂(qn)₂(H₂O)₂] (2) · Hqn, [V₂O₂Cl₂(qn)₂(C₃H₇OH)₂] (3), and [V₂O₂Cl₂(qn)₂(C₄H₉OH)₂] (4). Reaction of vanadium(III) chloride with 5-chloro-8-quinolinol (HClqn) gave four dinuclear vanadium(IV) complexes: [V₂O₂Cl₂(Clqn)₂(H₂O)₂] (5) · 2HClqn, [V₂O₂Cl₂(Clqn)₂(C₃H₇OH)₂] (6), [V₂O₂Cl₂(Clqn)₂(C₆H₅CH₂OH)₂] (7), and [V₂O₂Cl₂(Clqn)₂(C₄H₉OH)₂] (8) · 2C₄H₉OH. Reaction of vanadium(III) chloride with 5-fluoro-8-quinolinol (HFqn) gave two dinuclear vanadium(IV) complexes: [V₂O₂Cl₂(Fqn)₂(H₂O)₂] (9) · HFqn · 2H₂O and V₂O₂Cl₂(Fqn)₂(C₃H₇OH)₂] (10). X-ray structures of 1 · 2H₂qn · 2Cl · CH₃CN, 3, 4, 6, 7, 8 · 2 t-BuOH, and 10 have been determined. As to the mononuclear species 1 · 2H₂qn · 2Cl · CH₃CN, coordination of Hqn to vanadium does not occur, but protonation to Hqn occurs to give H₂qn⁺, which links 1’s through hydrogen bonding, while each of the dinuclear species has a terminal and a bridging qn (or Clqn, Fqn) ligand, giving rise to a (V-O)₂ ring. Magnetic measurements of 3, 4, 6, 7, and 10 in solid form show very weak antiferromagnetic behavior, and the effective magnetic moments are close to spin only value (2.44) of d¹-d¹ system, while ESR of 3 in THF shows dissociation to monomeric species. Change from mononuclear, 1, to dinuclear, 2, species was followed by the change of electronic spectrum.     

Synthesis, characterization, and magnetic properties of new homotrinuclear bis(oxamato) copper(II) complexes with an asymmetric central N,N′-bridge

The new mononuclear bis(oxamato) complex [n-Bu₄N]₂[Cu(obbo)] (1) (obbo=o-benzyl-bis(oxamato)) has been synthesized as a precursor for trinuclear oxamato-bridged transition metal complexes. Starting from 1 the homotrinuclear complexes [Cu₃(obbo)(pmdta)₂(NO₃)](NO₃)·CH₂Cl₂·H₂O (2) and [Cu₃(obbo)(tmeda)₂(NO₃)₂(dmf)] (3) have been prepared, where pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine, tmeda = N,N,N′,N′-tetramethylethylenediamine and dmf = dimethylformamide. The crystal structures of 1-3 were solved. The magnetic properties of 2 and 3 were studied by susceptibility measurements versus temperature. For the intramolecular J parameter values of −111 cm⁻¹ (2) and −363 cm⁻¹ (3) were obtained.     

Hydrogen-halide versus alkyl-halide oxidative addition in dimethyl platinum(II) complexes: Crystal structure of [PtBr2(bpy)]

Dimethyl platinum(II) complexes [PtMe₂(NN)] {NN = bu₂bpy (4,4′-di-tert-butyl-2,2′-bipyridine) (1a), bpy (2,2′-bipyridine) (1b), phen (1,10-phenanthroline) (1c)} reacted with commercial 3-bromo-1-propanol in the presence of 1,3-propylene oxide to afford cis, trans- [PtBrMe₂{(CH₂)₃OH}(NN)] (NN = bu₂bpy (2a), bpy (2b), phen (2c)). On the other hand, [PtMe₂(NN)] (1a)-(1b) reacted with the trace of HBr in commercial 3-bromo-1-propanol to give [PtBr₂(NN)] (NN = bu₂bpy (3a), bpy (3b)). The reaction pathways were monitored by ¹H NMR at various temperatures. Treatment of 1a-1b with a large excess of 3-bromo-1-propanol at −80 °C gave the corresponding methyl(hydrido)platinum(IV) complexes [PtBr(H)Me₂(NN)] (NN = bu₂bpy (4a), bpy (4b)) via the oxidative addition of dimethyl platinum(II) complexes with HBr. The complexes [PtBr(H)Me₂(NN)] decomposed by reductive elimination of methane above −20 °C for bu₂bpy and from −20 to 0 °C for bpy analogue to give methane and platinum(II) complexes [PtBrMe(NN)] (5a)-(5b) and then decomposed at about 0 °C to yield [PtBr₂(NN)] and methane. When the reactions were performed at a molar ratio of Pt:RX/1:10, the corresponding complexes [PtBrMe(NN)] (5a)-(5b) were also obtained. The crystal structure of the complex 3b shows that platinum adopts square planar geometry with a twofold axis through the platinum atom. The Pt…Pt distance (5.164 Å) is considerably larger than the interplanar spacing (3.400 Å) and there is no platinum-platinum interaction.     

Diverse coordination of polynuclear copper(II) complexes constructed from benzene tetracarboxylates

The reaction of aqueous solutions of the preformed 1:1 Cu(ClO₄)₂-polydentate amine with tetrasodium 1,2,4,5-benzene tetracarboxylate (Na₄bta) afforded three different types of polynuclear compounds. These include the tetranuclear complexes: [Cu₄(Medpt)₄(μ₄-bta)(ClO₄)₂(H₂O)₂](ClO₄)₂·2H₂O (1), [Cu₄(pmdien)₄(μ₄-bta)(H₂O)₄](ClO₄)₄ (2), [Cu₄(Mepea)₄(μ₄-bta)(H₂O)₂](ClO₄)₄(3), [Cu₄(TPA)₄(μ₄-bta)](ClO₄)₄·10H₂O (4) and [Cu₄(tepa)₄(μ₄-bta)](ClO₄)₄·2H₂O (5), the di-nuclear: [Cu₂(DPA)₂(μ₂-bta)(H₂O)₂]·4H₂O (6), [Cu₂(dppa)₂(μ₂-bta)(H₂O)₂]·4H₂O (7) and [Cu₂(pmea)₂(μ₂-bta)]·14H₂O (8) and the trinuclear complex [Cu₃(dppa)₃(μ₃-bta)(H₂O)_2.25](ClO₄)₂·6.5H₂O (9) where Medpt = 3,3′-diamino-N-methyldipropylamine, pmedien = N,N,N′,N″,N″-pentamethyldiethylenetriamine, Mepea = [2-(2-pyridyl)ethyl]-(2-pyridylmethyl)methylamine, TPA = tris(2-pyridylmethyl)amine, tepa = tris[2-(2-pyridyl)ethyl)]amine, DPA = di(2-pyridymethyl)amine, dppa = N-propanamide-bis(2-pyridylmethyl)amine and pmea = bis(2-pyridylmethyl)-[2-(2-pyridylethyl)]amine. The complexes were structurally characterized by elemental analyses, spectroscopic techniques, and by X-ray crystallography for complexes 1, 2, 4, 6, 7 and 9. X-ray structure of the complexes reveal that bta⁴⁻ is acting as a bridging ligand via its four deprotonated caboxylate groups in 1, 2 and 4, three carboxylate groups in 9 and via two trans-carboxylates in 6 and 7. The complexes exhibit extended supramolecular networks with different dimensionality: 1-D in 2 and 4 due to hydrogen bonds of the type O-H···O, 2-D in 1 and 7, and 3-D network in 6 as a result of hydrogen bonds of the types N-H···O and O-H···O. Magnetic susceptibility measurements showed very weak antiferromagnetic coupling between the Cu^II ions in 1-5, 7-9 (|J| = 0.02-0.87 cm⁻¹) and weak ferromagnetic coupling for 6 (J = 0.08 cm⁻¹).     

Spectroscopic and structural characterizations of water-soluble peroxo complexes of niobium(V) with N-containing heterocyclic ligands

New water-soluble heteroleptic peroxo complexes of niobium^V have been prepared with N-containing heterocyclic ligands. The compounds correspond to the general formula (gu)_x[Nb(O₂)₃(L)] · nH₂O (gu = guanidinium). Three different ligands (L) have been used: picolinic acid (Hpic), picolinic acid N-oxide (HpicO) and pyrazine 2,5-dicarboxylic acid (2,5-H₂pzdc). The Nb^V complexes have been characterized on the basis of elemental and thermal analysis as well as by IR and ESI-mass spectrometry. The crystal structure of the peroxo complex with the picolinato N-oxide ligand, (gu)₂[Nb(O₂)₃(picO)] (II) has been determined, showing an eightfold-coordinated Nb atom surrounded by three peroxide groups and a picO ligand bound in a bidentate mode via the carboxylato and the N-oxide groups. The coordination polyhedron around the metal is a triangular dodecahedron.