Analysis of synthetic derivatives of peptide hormones by capillary zone electrophoresis and micellar electrokinetic chromatography with ultraviolet-absorption and laser-induced fluorescence detection

Capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) were used for the analysis of new synthetic derivatives of hypophysis neurohormones--vasopressin and oxytocin, and pancreatic hormone--human insulin (HI) and its octapeptide fragment, derivatized by fluorescent probe, 4-chloro-7-nitrobenzo[1,2,5]oxadiazol (NBD). The suitable composition of background electrolytes (BGEs) was selected on the basis of calculated pH dependence of effective charge of analyzed peptides. Basic ionogenic peptides were analyzed by CZE in the acidic BGE composed of 100 mM H3PO4, 50 mM Tris, pH 2.25. The ionogenic peptides with fluorescent label, NBD, were analyzed in 0.5 M acetic acid, pH 2.5. The best MEKC separation of non-ionogenic peptides was achieved in alkaline BGE, 20 mM Tris, 5 mM H3PO4, with micellar pseudophase formed by 50 mM sodium dodecylsulfate (SDS), pH 8.8. Selected characteristics (noise, detectability of substance, sensitivity of detector) of the UV-absorption detectors (single wavelength detector, multiple-wavelength photodiode array detector (PDA), both of them operating at constant wavelength 206 nm) and laser-induced fluorescence (LIF) detector (excitation/emission wavelength 488/520 nm) were determined. The detectability of peptides in the single wavelength detector was 1.3-6.0 micromol dm(-3) and in the PDA detector 1.6-3.1 micromol dm(-3). The LIF detection was more sensitive, the applied concentration of NBD derivative of insulin fragment in CZE analysis with LIF detection was three orders lower than in CZE with UV-absorption detector, and the detectability of this peptide was improved to 15.8 nmol dm(-3).     

Analysis of liquid extracts from tree and grass pollens by capillary electromigration methods

Capillary electromigration methods, zone electrophoresis (CZE), micellar electrokinetic chromatography (CMEKC) and isotachophoresis (CITP), have been used for analysis of water and water-buffer extracts from tree-common birch (Betula verrucosa) and grass-orchardgrass (Dactylis glomerata) pollen samples. Water extracts were analyzed by CZE using acetic acid as background electrolyte (BGE), by CMEKC in tris-phosphate BGE with anionic detergent sodium dodecyl sulfate (SDS) micellar pseudophase (TP-SDS) and by CITP in cationic mode with leading/terminating cations K+/BALA+ (beta-alanine (BALA)) and in anionic mode with leading/terminating anions Cl-/MES- (2-(N-morpholino)ethanesulphonic acid (MES)). Moreover, acetic acid extracts were analyzed by CZE using acetic acid as BGE, and alkaline water-SDS-buffer extracts were analyzed by CMEKC using TP-SDS as BGE. Extracted amounts of pollen allergens and other UV-absorbing compounds and the number of resolved components were evaluated from CZE, CMEKC and CITP analyses of the liquid extracts. Larger amounts of UV-absorbing material were found in the water-buffer pollen extracts than in the water extracts. More UV-absorbing material was found in all extracts from D. glomerata pollen than in relevant extracts from B. verrucosa pollen. It was found by CITP that the extracted amounts of anionic components and their number were much higher than those of cationic components. Concentrations of some inorganic ions (e.g. Cl-, K+, Na+, Ca2+) in pollen samples were also determined by CITP.     

Separation and detection of vitellogenin in fish plasma by capillary zone electrophoresis

A method for coupling capillary zone electrophoresis (CZE) with rapid membrane chromatography purification (RMCP) was established for the analysis of vitellogenin (VTG) in male fish plasma induced with 17ss-estrodiol. CZE analyses of purified VTG were performed in a buffer containing 25 mM sodium borate (pH 8.4). A 50 microm i.d. fused-silica capillary was used for separation and the detection was carried out by UV-diode array at 214 nm. Inter- and intra-assay variabilities of the proposed method were less than 10.06 and 1.95%, respectively. The method has good linear relationship over the scope of 15-2250 microg/ml with a correlation coefficient of R2 = 0.9965 and a detection limit of 7.0 microg/ml. The established CZE method was also applied to directly separate and identify VTG from fish plasma. The results indicated this method could minimize interferences from plasma proteins, allowing the detection of at least 62.5 microg/ml of VTG proteins in total proteins. This is a rapid and easy method to determine the quantity and purity of VTG compared to Bradford method and SDS-PAGE.     

Analysis of optical purity and impurity of synthetic D-phenylalanine products using sulfated beta-cyclodextrin as chiral selector by reversed-polarity capillary electrophoresis

A new capillary electrophoresis (CE) method has been achieved for simultaneous separation and quantification of phenylalanine, N-acetylphenylalanine enantiomers, and prochiral N-acetylaminocinnamic acid, possibly co-existent in reaction systems or synthesized products of D-phenylalanine. The separation was carried out in an uncoated capillary under reversed-electrophoretic mode. Among the diverse charged cyclodextrins (CDs) examined, highly sulfated (HS)-beta-CD as the chiral selector exhibited the best enantioselectivity. The complete separation of the analytes was obtained under the optimum conditions of pH 2.5, 35 mM Tris buffer containing 4% HS-beta-CD, applied voltage -15 kV, and capillary temperature 25 degrees C. Furthermore, the proposed method was applied to the determination of optical purity and trace impurities in three batches of the asymmetric synthetic samples of D-phenylalanine, and satisfactory results were obtained. The determination recoveries of the samples were in the range of 97.8-103.8%, and precisions fell within 2.3-5.0% (RSD). The results demonstrate that this CE method is a useful, simple technique and is applicable to purity assays of D-phenylalanine.     

Monitoring equilibria and kinetics of protein folding/unfolding reactions by capillary zone electrophoresis

A method is described here for studying conformational transitions of proteins due to denaturing agents: capillary zone electrophoresis (CZE) in acidic, isoelectric buffers. The sample is run in 50 mM isoelectric glutamic acid (pH = pI = 3.2) added with 1 mM oligoamine (tetraethylene pentamine) for quenching protein interaction to the capillary wall (final pH = 3.3). Muscle acylphosphatase (AcP), in this buffer, exhibited a free solution mobility of 2.63 x 10(-4) cm(2) V(-1) s(-1). By studying the unfolding kinetics, as a function of time of incubation in 7 M urea, it was possible to measure the rate constant of the unfolding reaction, estimated to be 0.00030+/-0.00006 s(-1). The same measurements, when repeated via spectroscopic monitoring of intrinsic fluorescence, gave a value of 0.00034+/-0.00002 s(-1), thus in excellent agreement with CZE data. By equilibrium unfolding CZE studies, it was possible to construct the typical sigmoidal transition of unfolding vs urea molarity: the midpoint of this transition, at which the folded and unfolded states should be equally populated, was estimated to be at 4.56 M urea. Similar experiments by fluorometric analysis gave a value of 4.60 M urea as midpoint of the unfolding curve.     

Determination of enantiomeric excess for 2,3-dihydroxy-3-phenylpropionate compounds by capillary electrophoresis using hydroxypropyl-beta-cyclodextrin as chiral selector

A new capillary zone electrophoresis (CZE) method was developed to separate three chiral 2,3-dihydroxy-3-phenylpropionate enantiomers using neutral hydroxypropyl-beta-CD (HP-beta-CD) as chiral selector and borate as background electrolyte. The results showed that HP-beta-CD exhibited good enantioselectivity and high resolution was achieved under the optimum condition of pH 10.3, 200 mM borate buffer containing 6% methanol and 50 mM HP-beta-CD at 15 kV and 20 degrees C within 16 min. The precision of the method was <0.9% for migration time and 4.5% for corrected peak area. In addition, the developed method was successfully applied to the determination of enantiomeric excess (ee) of synthetic 2,3-dihydroxy-3-phenylpropionate samples. With this method, low as 0.2% impurity of the undesirable enantiomer in the presence of high amount of target enantiomer was determined. The results demonstrated that the proposed CZE method is a simple and useful technique and is applicable to ee assay of 2,3-dihydroxy-3-phenylpropionate enantiomers.     

Quantification of pralidoxime methylsulfate (Contrathion) in human urine by capillary zone electrophoresis

Pralidoxime methylsulfate (Contrathion) is widely used to treat organophosphate poisoning. For the first time, we developed a specific assay for urinary pralidoxime using capillary zone electrophoresis (CZE) in the following conditions: fused-silica capillary (length: 47 cm, internal diameter: 75 microm), electrolyte solution: 25 mM sodium borate (pH 9.1), voltage: 15 kV, temperature: 25 degrees C, injection time: 1 or 2s, on-line UV detection: 280 nm. Sample preparation did not require a deproteinization step (1:5 dilution in water). The method was linear between 0.125 and 2 mg mL-1 of pralidoxime (quantification limit: 0.10 mg mL-1). Coefficients of variation for intra- and inter-assay precision were below 10% for all three control levels (0.15-1.15 mg mL-1). This assay was successfully applied to urine specimens from organophosphate poisoned patients treated by Contrathion (n=10). This CZE method allows the measure of pralidoxime in urine within 15 min with excellent precision, selectivity, and sensitivity. It is simple (no pretreatment) and convenient, thus suitable for the monitoring of Contrathion therapy in organophosphate poisoned patients.     

Effect of buffer pH and peptide composition on the selectivity of peptide separations by capillary zone electrophoresis

A series of 10 synthetic peptides containing varying degrees of charge and hydrophobicity was used to study the effects of peptide composition and buffer pH on the selectivity of separations by capillary zone electrophoresis (CZE). A simple model is used to explain the effect of buffer pH on the separation. It was found that pH is an important parameter affecting the selectivity of CZE separations. Furthermore, it is shown that the selectivity of the separation is such that peptides differing in neutral amino acid composition can be resolved, and that even differences in a peptide's amino acid sequence can be detected. A protease digest of beta-lactoglobulin A is shown as a practical example of a separation of a complex peptide mixture.     

Analytical control of a pharmaceutical formulation of sodium picosulfate by capillary zone electrophoresis

A new procedure for the analytical control of a pharmaceutical formulation by capillary zone electrophoresis (CZE) is proposed. It allows the simultaneous determination of the major compounds in the formulation: active compound (sodium picosulfate) and preservative (methylparaben), and the degradation products of the preservative, which slowly degrades by hydrolysis or by transesterification with sorbitol (sweetener in excess in the formulation) yielding p-hydroxybenzoic acid and sorbitolparaben, respectively. UV–Vis detection in the absorption maxima of the analytes and 20 mM borate solution at pH 10 as background electrolyte are used. Results are compared with those provided by the HPLC procedure. The method has also been validated using the HPLC procedure as the reference method, evaluating selectivity, accuracy, linearity and precision. The CZE procedure developed is sufficiently accurate and the precision achieved is about 1% for major and 3% for minor compounds.     

Determination of L-ascorbic acid in Lycopersicon fruits by capillary zone electrophoresis

This study shows an improved method for the determination of L-ascorbic acid (l-AA) in fruits of Lycopersicon by capillary zone electrophoresis (CZE). Two backgrounds electrolytes (BGEs) have been tested: (i) 400 mM borate at pH 8.0 and 1 x 10(-2)% hexadimethrine bromide, for the separation of Eulycopersicon subgenus species; and (ii) as in BGE(i) but supplemented with 20% (v/v) acetonitrile, for the separation of species of the Eriopersicon subgenus. The present procedures were compared with two routine methods-enzymatic assay and potentiometric titration with 2,6-dichlorophenol-indophenol. While these routine methods presented some difficulties in quantifying l-AA in several Lycopersicon fruits, CZE was successfully applied in all the analyzed samples. The proposed CZE protocols give lower detection limits (<0.4 microg ml(-1)); are cheaper, quicker, and highly reproducible; and can be applied to analyze large series of samples (ca. 50 samples per day) which is utmost importance, not only in screening trials for internal quality and tomato breeding programs, but also in systematic and routine characterization of Lycopersicon fruits.     

Profiling preparations of recombinant birch pollen allergen Bet v 1a with capillary zone electrophoresis in pentamine modified fused-silica capillaries

Three preparation batches of the recombinant birch pollen allergen Bet v 1a have been analyzed by capillary zone electrophoresis (CZE) using a separation electrolyte consisting of 100 mmol L(-1) phosphate at pH 6.50 with 2.0 mmol L(-1) tetraethylenepentamine (TEPA) added. TEPA improved the resolution by wall shielding and selective attachment to allergens, but reduced migration repeatability at concentrations >2.0 mmol L(-1). Heterogeneity of preparations determined by CZE and electrospray ionization-quadrupole-time-of flight-MS were in accordance and revealed chemically modified (carbamylated) allergens in one of the preparations. The method was validated according to the ICH-guidelines. Repeatability of effective electrophoretic mobility (mu(eff)) was <0.55% R.S.D. (n = 5). Migration time corrected peak areas were used for quantification. Limit of quantification (LOQ) was 25 microg mL(-1) for the major isoform Bet v 1a, based on a signal-to-noise ratio of 10, and detector response was linear between LOQ and 0.90 mg mL(-1). Purity of the different rBet v 1a preparations was determined to be between 40 and 92% depending on the manufacturing protocol.     

Solid phase synthesis and biological evaluation of enantiomerically pure wasp toxin analogues PhTX-343 and PhTX-12

PhTX-343 and PhTX-12, analogues of the natural polyamine wasp toxin PhTX-433, were synthesised in 40-60% yields as pure enantiomers using solid phase synthesis techniques. Capillary electrophoresis procedures were developed for chiral separation and determination of enantiomeric purity (ee) of the enantiomers of PhTX-343 and PhTX-12. The methods were optimised with respect to chiral selector, buffer pH, and temperature around the capillary. Thus, rac-PhTX-343 was resolved using a separation buffer containing 30 mM heptakis-(2, 6-di-O-methyl)-beta-cyclodextrin in 50 mM 6-aminocarproic acid (pH 4. 0) at 15 degrees C. rac-PhTX-12 was not resolvable in this system, but could be resolved using a separation buffer containing 10% w/v of dextrin 10, a linear maltodextrin, in 50 mM 6-aminocaproic acid (pH 4.0) at 15 degrees C. Using these methods, the optical purity of the synthetic enantiomers was determined to be ee > 99%. The enantiomers were also characterised by chiroptical methods. The antagonist potency of the enantiomers was tested on nicotinic acetylcholine receptors (human muscle-type nAChR) expressed in TE671 cells, ionotropic glutamate receptors in Xenopus laevis oocytes (expressing recombinant GluR1flop receptors), and locust muscle ionotropic glutamate receptors sensitive to quisqualate (qGluR). The potencies of each pair of enantiomers were similar (eudismic ratio close to 1).     

Determination of quinolones in plasma samples by capillary electrophoresis using solid-phase extraction

The potential of capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) have been investigated for the separation and quantitative determination of 10 quinolone antibiotics. The influence of different conditions, such as the buffer and pH of the electrolyte, the surfactant and the ion-pairing agents added to the electrolyte and the organic modifier were studied. A buffer consisting of 40 mM sodium tetraborate at pH 8.1 containing 10% (v/v) methanol was found to be a highly efficient electrophoretic system for separating lomefloxacin, enoxacin, norfloxacin, pipemidic acid, ofloxacin, piromidic acid, flumequine, oxolinic acid, cinoxacin and nalidixic acid. A solid-phase extraction method to remove the sample matrix (pig plasma samples) was developed on a C₁₈ cartridge using a mixture of methanol–water (70:30, v/v). The method is specific and reproducible and mean recoveries were in the range 94.0±4.2% and 123.3±4.1% for pig plasma samples over the range used. A linear relationship between concentration and peak area for each compound in pig plasma samples was obtained in the concentration range 5–20 mg l⁻¹ and detection limits were between 1.1 and 2.4 mg l⁻¹.     

Current contributions of peptide synthesis to studies on brain-gut-skin triangle peptides

The usefulness of a strong acid, such as MSA or TFMSA/TFA, as a deprotecting reagent in peptide synthesis was examined. By synthesizing several structurally related brain-gut-skin triangle peptides, a number of advantageous features of the thioanisole-mediated deprotecting procedure were demonstrated. New amino acid derivatives, Arg(Mts), Trp(Mts) and Asp(OChp), were introduced to improve the synthetic methodology of complex peptides and the superior properties of Cys(Ad) were evaluated.     

Simultaneous determination of key bioactive components in Hedyotis diffusa by capillary electrophoresis

A capillary zone electrophoresis (CZE) method based on systematic one-variable-at-a time approach was developed for the analysis of four important bioactive components (geniposidic acid, ursolic acid, quercetin and p-coumaric acid) in the extract of Hedyotis diffusa (HD). Separations were carried out in a fused-silica capillary tube with peak detection at 214 nm. Good separation was achieved using a 20 mM borate buffer containing 5% acetonitrile as organic modifier and pH adjusted to 10.0. Operating voltage was 15 kV and temperature was maintained at 25 degrees C while hydrodynamic injection was 5s. A good linearity, with correlation coefficients in the ranges of 0.997-0.999 was obtained in the calibration curves of each standard. Relative standard deviation (R.S.D.) of migration time was between 0.32 and 0.70% and deviation of corrected peak area was between 8.84 and 11.99%. These results indicate that this method could be used for rapid and simultaneous analysis of the bioactive components in HD and other herbal products.     

Studies on peptides CLVIII. Model experiments for the synthesis of open-chain unsymmetrical cystine-peptides

Treatment of a mixture of Cys(R)(O) and Cys(R) with an acid was found to generate cystine in fairly good yields, when suitable R, R, and an acid were selected. An unsymmetrical cystine peptide was prepared by treatment of a mixture of Z(OMe)-Cys(R) (0)-Ala-NH₂ (R=Acm or MBzl) and Z(OMe)-Cys(MBzl)-Gly-OBzl with TFA or 1 M TFMSA/TFA.³ Oxytocin was obtained in an excellent yield by TFA treatment of the protected peptide containing Cys(Acm)(0) and Cys(MBzl). Thus, formation of the disulfide bond was found feasible at the position of Cys(R) (0).The following abbreviations are used Boc t-butyloxycarbonyl - Z(OMe) p-methoxybenzyloxycarbonyl - MBzl p-methoxybenzyl - Acm acetamidomethyl - Bzl benzyl - Ad l-adamantyl - tBu t-butyl - TFA trifluoroacetic acid - TFMSA trifluoromethanesulfonic acid - TMSOTf trimethylsilyl trifluoromethane sulfonate     

On-line combination of monolithic immobilized pH gradient-based capillary isoelectric focusing and capillary zone electrophoresis via a partially etched porous interface for protein analysis

An integrated platform consisting of monolithic immobilized pH gradient-based capillary isoelectric focusing (M-IPG CIEF) and capillary zone electrophoresis (CZE) coupled by a partially etched porous interface was established. Since carrier ampholytes (CAs) were immobilized on monolith in M-IPG CIEF to form a stable pH gradient, subsequent depletion of CAs at the interface to prevent the interference on CZE separation and detection were avoided. Moreover, a partially etched porous capillary column, which was facile for fabrication and durable for operation, was exploited as the interface to combine M-IPG CIEF and CZE. The RSD values in terms of the migration time for M-IPG CIEF separation, transfer protein from the first dimension to the second dimension, and CZE separation, were 2.4%, 3.9% and 2.3%, respectively. With a 6-protein mixture as the sample, two-dimensional capillary electrophoresis (2D-CE) separation was successfully completed within 116 min, yielding a peak capacity of ～200 even with minute sample amount down to 5.0 μg/mL. The limit of detection was 0.2 μg/mL. In addition, proteins extracted from milk were used to test the performance of such a 2D-CE separation platform. We expect that such a novel 2D-CE system would provide a promising tool for protein separation with high throughput and high peak capacity.     

Bioanalysis of tobramycin for therapeutic drug monitoring by solid-phase extraction and capillary zone electrophoresis

A method based on solid-phase extraction (SPE) and capillary zone electrophoresis (CZE) for the analysis of tobramycin in human serum is presented. An off-line SPE employing a carboxypropyl bonded phase (CBA) cartridge was used for the extraction of tobramycin from human serum. Adsorbed tobramycin was eluted from the CBA cartridge using a mixture of NH(3) (25%, w/v)-methanol (30:70, v/v). After evaporation, the analyte was reconstituted and derivatized with o-phthaldialdehyde (OPA)/3-mercaptopropionic acid (MPA). The resulting tobramycin-OPA/MPA derivative was purified, and then identified by mass spectrometry. The tobramycin-OPA/MPA derivative was then analysed by CZE with a background electrolyte (BGE) comprising of 30 mM sodium tetraborate pH 10.0-acetonitrile (ACN) (80:20, v/v) with ultraviolet detection at 230 nm. A linear response was observed in the range of 0.3-30 microg/ml with r(2) = 0.992. The sensitivity of the method was determined by its limit of quantitation (LOQ) and limit of detection (LOD) of 0.3 microg/ml and 0.1 microg/ml, respectively. SPE recovery ranged from 68 to 79% at the trough levels to 98% at the peak levels found in serum. Furosemide has been added as internal standard (IS) to improve precision. For the therapeutic range of tobramycin in serum (2-10 microg/ml) the relative standard deviation (R.S.D.) was less than 11% for the entire SPE/CE process. The method demonstrated excellent selectivity as shown by the lack of interference from a total of 20 drugs investigated. The method was then used in therapeutic drug monitoring of patients receiving the drug.     

Determination of poorly separated monoclonal serum proteins by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) technique was developed for the determination of poorly separated monoclonal serum proteins by agarose gel electrophoresis (AGE). A P/ACE 5500 capillary instrument (Beckman) was used under the following conditions: 57 cm x 50 microm I.D. fused-silica capillary, pH 9.6 borate buffer, and 214 nm on-line detection. Sixty patients (61 +/- 13 years) with a well isolated (n=24, group A) or poorly separated monoclonal band(s) by AGE (n=36, group B) were included in this study. Within- and between-run precision for CZE was below 4% for albumin and 7% for gamma-globulin. A 100% (group A) or 61% agreement (group B, more bands detected by CZE in 10 cases) was obtained between CZE and AGE for the number of monoclonal bands. In group B, quantification was possible in 92% of samples by CZE vs. 64% by AGE (P<0.05, chi-square). The proposed CZE method appears as an additional helpful technique for the determination of poorly separated monoclonal serum proteins by AGE.     

Determination of the degree of substitution and its distribution of carboxymethylcelluloses by capillary zone electrophoresis

A method based on capillary zone electrophoresis (CZE) has been developed to determine the degree of substitution (DS) of carboxymethylcellulose (CMC). Separations were performed with borate buffer (pH 9, ionic strength 20 mM) as background electrolyte in capillaries of 75 microm ID, with an applied voltage of 10 kV, and for detection UV absorption at 196 nm was measured. The use of an internal standard (phthalic acid) to correct for mobility variations resulted in a strong improvement of the precision of the DS determination. Experiments with indirect UV detection indicated that the peak widths obtained actually reflect the variation in mobility, and with that of the DS value, of CMC samples. With the proposed method not only the average DS value but also its dispersity could be established for technical CMC samples. A small but definite effect of the polymeric size on the mobilities was observed. Therefore, DS calibration curves will have to be determined for a specific MM range. Since the size effect is small, a classification of CMCs as low-, middle-, or high MM will be sufficient to obtain accurate data on the DS distribution.