Characterization and kinetics of 45 kDa chitosanase from Bacillus sp. P16

An extracellular 45 kDa endochitosanase was purified and characterized from the culture supernatant of Bacillus sp. P16. The purified enzyme showed an optimum pH of 5.5 and optimum temperature of 60 degrees C, and was stable between pH 4.5-10.0 and under 50 degrees C. The Km and Vmax were measured with a chitosan of a D.A. of 20.2% as 0.52 mg/ml and 7.71 x 10(-6) mol/sec/mg protein, respectively. The enzyme did not degrade chitin, cellulose, or starch. The chitosanase digested partially N-acetylated chitosans, with maximum activity for 15-30% and lesser activity for 0-15% acetylated chitosan. The chitosanase rapidly reduced the viscosity of chitosan solutions at a very early stage of reaction, suggesting the endotype of cleavage in polymeric chitosan chains. The chitosanase hydrolyzed (GlcN)7 in an endo-splitting manner producing a mixture of (GlcN)(2-5). Time course studies showed a decrease in the rate of substrate degradation from (GlcN)7 to (GlcN)6 to (GlcN)5, as indicated by the apparent first order rate constants, k1 values, of 4.98 x 10(-4), 2.3 x 10(-4), and 9.3 x 10(-6) sec(-1), respectively. The enzyme hardly catalyzed degradation of chitooligomers smaller than the pentamer.     

Characterization of a Chitosanase from Aspergillus fumigatus ATCC13073

Chitosanase II was purified from the culture filtrate of Aspergillus fumigatus ATCC13073. The purified enzyme had a molecular mass of 23.5 kDa. The N-terminal amino acid sequence of chitosanase II was identical to those of other Aspergillus chitosanases belonging to glycoside hydrolase family 75. The optimum pH and temperature were pH 6.0 and 40 °C. Chitosanase II hydrolyzed 70% deacetylated chitosan faster than fully deacetylated chitosan. Analysis of the degradation products generated from partially N-acetylated chitosan showed that chitosanase II split GlcN-GlcN and GlcNAc-GlcN bonds but not GlcNAc-GlcNAc or GlcN-GlcNAc, suggesting that it is a subclass I chitosanase. It degraded (GlcN)(6) to produce (GlcN)(3) as main product and small amounts of (GlcN)(2) and (GlcN)(4). Reaction rate analyses of mono-N-acetylated chitohexaose suggested that the (+3) site of chitosanase II recognizes the GlcNAc residue rather than the GlcN residue of its substrate.     

Chitosanase-catalyzed hydrolysis of 4-methylumbelliferyl beta-chitotrioside.

4-Methylumbelliferyl beta-chitotrioside [(GlcN)(3)-UMB] was prepared from 4-methylumbelliferyl tri-N-acetyl-beta-chitotrioside [(GlcNAc)(3)-UMB] using chitin deacetylase from Colletotrichum lindemuthianum, and hydrolyzed by chitosanase from Streptomyces sp. N174. The enzymatic deacetylation of (GlcNAc)(3)-UMB was confirmed by (1)H-NMR spectroscopy and mass spectrometry. When the (GlcN)(3)-UMB obtained was incubated with chitosanase, the fluorescence intensity at 450 nm obtained by excitation at 360 nm was found to increase with proportion to the reaction time. The rate of increase in the fluorescence intensity was proportional to the enzyme concentration. This indicates that chitosanase hydrolyzes the glycosidic linkage between a GlcN residue and UMB moiety releasing the fluorescent UMB molecule. Since (GlcN)(3) itself cannot be hydrolyzed by the chitosanase, (GlcN)(3)-UMB is considered to be a useful low molecular weight substrate for the assay of chitosanase. The k(cat) and K(m) values obtained for the substrate (GlcN)(3)-UMB were determined to be 8.1 x 10(-5) s(-1) and 201 microM, respectively. From TLC analysis of the reaction products, the chitosanase was found to hydrolyze not only the linkages between a GlcN residue and UMB moiety, but also the linkages between GlcN residues. Nevertheless, the high sensitivity of the fluorescence detection of the UMB molecule would enable a more accurate determination of kinetic constants for chitosanases.     

Purification and Characterization of Exo-beta-d-Glucosaminidase from a Cellulolytic Fungus, Trichoderma reesei PC-3-7

Chitosan-degrading activities induced by glucosamine (GlcN) or N-acetylglucosamine (GlcNAc) were found in a culture filtrate of Trichoderma reesei PC-3-7. One of the chitosan-degrading enzymes was purified to homogeneity by precipitation with ammonium sulfate followed by anion-exchange and hydrophobic-interaction chromatographies. The enzyme was monomeric, and its molecular mass was 93 kDa. The optimum pH and temperature of the enzyme were 4.0 and 50 degrees C, respectively. The activity was stable in the pH range 6.0 to 9.0 and at a temperature below 50 degrees C. Reaction product analysis from the viscosimetric assay and thin-layer chromatography and H nuclear magnetic resonance spectroscopy clearly indicated that the enzyme was an exo-type chitosanase, exo-beta-d-glucosaminidase, that releases GlcN from the nonreducing end of the chitosan chain. H nuclear magnetic resonance spectroscopy also showed that the exo-beta-d-glucosaminidase produced a beta-form of GlcN, demonstrating that the enzyme is a retaining glycanase. Time-dependent liberation of the reducing sugar from partially acetylated chitosan with exo-beta-d-glucosaminidase and the partially purified exo-beta-d-N-acetylglucosaminidase from T. reesei PC-3-7 suggested that the exo-beta-d-glucosaminidase cleaves the glycosidic link of either GlcN-beta(1-->4)-GlcN or GlcN-beta(1-->4)-GlcNAc.     

Purification of a constitutive chitosanase produced by Bacillus sp. MET 1299 with cloning and expression of the gene

A chitosanase produced constitutively by Bacillus sp. MET 1299 was purified by SP-Sephadex column chromatography. The molecular weight was estimated to be 52 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Optimal enzyme activity was observed at a pH of 5.5 and temperature of 60 degrees C. The purified chitosanase showed high activity on 90% deacetylated colloidal chitosan and beta-glucan, but not on hydrolyzed colloidal chitin, CMC, or their derivatives. The N-terminal amino acid sequence of the enzyme was determined. The cloned full length gene, 1362 bp in size, encoded a single peptide of 453 amino acids and had a conserved amino acid sequence of glycosyl hydrolase family 8. A search of the cDNA sequence with NCBI BLAST showed homology with chitosanase of Bacillus sp. KTCC 0377BP and Bacillus sp. No. 7-M. The recombinant protein was expressed in Escherichia coli, purified using affinity chromatography and characterized.     

Purification and some properties of a novel chitosanase from Bacillus subtilis KH1

One of at least two chitosanases secreted in the culture filtrate of Bacillus subtilis KH1 was purified by two sequential DEAE Sepharose CL-6B chromatographies, followed by Sephacryl S-100 HR gel chromatography. The purified enzyme was homogenous as judged by SDS-PAGE. It showed an estimated molecular weight and pI of 28,000 and 8.3, respectively. The enzyme drastically reduced the viscosity of highly deacetylated chitosan substrates, with the subsequent formation of chitooligosaccharides [(GlcN)(n), n=2-6]. No activity toward carboxymethylcellulose (CMC), chitobiose (GlcN)(2), or chitotriose (GlcN)(3) was detected. Separation and quantification of products of hydrolysis of 10% (w/v) solutions of chitooligosaccharides, (GlcN)(n), n=2-6, by HPLC showed the splitting of (GlcN) (n), n=4-6, in an endo-splitting manner. Oligomers comprising higher units than the starting substrate were also detected, indicating transglycosylation activity. The amino terminal sequence of this enzyme (A-G-L-N-K-D-Q-K-R-R) is identical to that of the chitosanase derived from Bacillus pumilus BN262 and to the deduced amino terminal sequences of Bacillus subtilis 168 and Bacillus amyloliquefaciens UTK chitosanases.     

Effect of chitin sources on production of chitinase and chitosanase byStreptomyces griseus HUT 6037

The advantage of usingStreptomyces griseus HUT 6037 in the production of chitinase or chitosanase is that the organism is capable of hydrolyzing amorphous or crystal-line chitin and chitosan according to the type of the substrate used. We investigated the effects of the enzyme induction time and chitin sources, CM-chitosan and deacetylated chitosan (degree of deacetylation 75–99%), on production of chitosanase. We found that this strain accumulated chitosanase when cells were grown in the culture medium containing chitosanaceous substrates instead of chitinaceous substrates. The highest chitosanase activity was obtained at 4 days of cultivation with 99% deacetylated chitosan. Soluble chitosan (53% deacetylated chitosan) was found to induce chitinase as well as chitosanase. The specific activities of chitinase and chitosanase were 0.91 and 1.33 U/mg protein at 3 and 5 days, respectively. From the study of the enzymatic digestibility of various degrees of deacetylated chitosan, it was found that (GlcN)₃, (GlcN)₄ and (GlcN)₅ were produced during the enzymatic hydrolysis reaction. The results of this study suggested that the sugar composition of (GlcN)₃ was homogeneous and those of (GlcN)₄ and (GlcN)₅ were heterogeneous.     

Sequence analysis of chitooligosaccharides by matrix-assisted laser desorption ionization postsource decay mass spectrometry

Chitin/chitosan oligosaccharides composed of 2-acetamido-2-deoxy-D-glucopyranose (GlcNAc) and/or 2-amino-2-deoxy-D-glucopyranose (GlcN) were prepared by chemical degradation of chitin or chitosan and separated by gel permeation chromatography. Oligosaccharides obtained after enzymatic hydrolysis of chitosan [F(A) 0.19] with a fungal chitinase were derivatized by reductive amination with 2-aminoacridone and sequenced by matrix-assisted laser desorption ionization time-of-flight postsource decay (PSD) mass spectrometry (MS). The sequence of a trimer, D1A2, was established as D-A-A. The composition of a hexamer D3A3 was ca. 65% D-A-D-D-A-A and 35% D-D-A-D-A-A. The PSD MS of a nonamer D5A4-amac revealed four isobaric species D-X-Y-D-X-Y-D-A-A, where A is GlcNAc, D is GlcN, and X and Y (X not equal Y) are mutually either D or A. This structure motif was also observed in a dodecamer D7A5 which was composed of eight isobaric sequences of the general formula (D-X-Y)(3)-D-A-A.     

Production of Pseudomonas Cells Having a High Fumarate Hydratase Activity

An extracellular 45 kDa endochitosanase was purified and characterized from the culture supernatant of Bacillus sp. P16. The purified enzyme showed an optimum pH of 5.5 and optimum temperature of 60°C, and was stable between pH 4.5-10.0 and under 50°C. The K _m and V _max were measured with a chitosan of a D.A. of 20.2% as 0.52 mg/ml and 7.71×10^?6 mol/sec/mg protein, respectively. The enzyme did not degrade chitin, cellulose, or starch. The chitosanase digested partially N-acetylated chitosans, with maximum activity for 15-30% and lesser activity for 0-15% acetylated chitosan. The chitosanase rapidly reduced the viscosity of chitosan solutions at a very early stage of reaction, suggesting the endotype of cleavage in polymeric chitosan chains. The chitosanase hydrolyzed (GlcN)₇ in an endo-splitting manner producing a mixture of (GlcN)_2-5. Time course studies showed a decrease in the rate of substrate degradation from (GlcN)₇ to (GlcN)₆ to (GlcN)₅, as indicated by the apparent first order rate constants, k ₁ values, of 4.98×10^?4, 2.3×10^?4, and 9.3×10^?6 sec^?1, respectively. The enzyme hardly catalyzed degradation of chitooligomers smaller than the pentamer.     

Thermostable chitosanase from Bacillus sp. strain CK4: its purification, characterization, and reaction patterns

A thermostable chitosanase, purified 156-fold to homogeneity in an overall yield of 12.4%, has a molecular weight of about 29,000 +/- 2,000, and is composed of monomer. The enzyme degraded soluble chitosan, colloidal chitosan, and glycol chitosan, but did not degrade chitin or other beta-linked polymers. The enzyme activity was increased about 2.5-fold by the addition of 10 mM Co2+ and 1.4-fold by Mn2+. However, Cu2+ ion strongly inhibited the enzyme. Optimum temperature and pH were 60 degrees C and 6.5, respectively. The enzyme was stable after heat treatment at 80 degrees C for 30 min or 70 degrees C for 60 min and fairly stable in protein denaturants as well. Chitosan was hydrolyzed to (GlcN)4 as a major product, by incubation with the purified enzyme. The effects of ammonium sulfate and organic solvents on the action pattern of the thermostable chitosanase were investigated. The amounts of (GlcN)3-(GlcN)6 were increased about 30% (w/w) in DAC 99 soluble chitosan containing 10% ammonium sulfate, and (GlcN)1 was not produced. The monophasic reaction system consisted of DAC 72 soluble chitosan in 10% EtOH also showed no formation of (GlcN)1, however, the yield of (GlcN)3 approximately (GlcN)6 was lower than DAC 99 soluble chitosan-10% ammonium sulfate. The optimal concentration of ammonium sulfate to be added was 20%. At this concentration, the amount of hexamer was increased by over 12% compared to the water-salt free system.     

Purification and characterization of chitosanase and Exo-beta-D-glucosaminidase from a Koji mold, Aspergillus oryzae IAM2660

Chitosan-degrading activity was detected in the culture fluid of Aspergillus oryzae, A. sojae, and A. flavus among various fungal strains belonging to the genus Aspergillus. One of the strong producers, A. oryzae IAM2660 had a higher level of chitosanolytic activity when N-acetylglucosamine (GlcNAc) was used as a carbon source. Two chitosanolytic enzymes, 40 kDa and 135 kDa in molecular masses, were purified from the culture fluid of A. oryzae IAM2660. Viscosimetric assay and an analysis of reaction products by thin-layer chromatography clearly indicated the endo- and exo-type cleavage manner for the 40-kDa and 135-kDa enzymes, respectively. The 40-kDa enzyme, designated chitosanase, catalyzed a hydrolysis of glucosamine (GlcN) oligomers larger than pentamer, glycol chitosan, and chitosan with a low degree of acetylation (0-30%). The 135-kDa exo-beta-D-glucosaminidase,enzyme,named released a single GlcN residue from the GlcN oligomers and chitosan, but did not release GlcNAc residues from either GlcNAc oligomer or colloidal chitin.     

Detection of Polygalacturonase in Kiwifruit during Ripening

Oligosaccharides produced during the course of the hydrolysis of 25% N-acetylated chitosan by Streptomyces griseus chitinase were fractionated by CM-Sephadex C-25 and Toyopearl HW-40F column chromatographies. Sugar compositions and sequences of main oligosaccharides were identified by N-acetylation, exo-splitting with β-GlcNAcase and β-GlcNase, and nitrous acid degradation. In addition to N-acetylated saccharides, GlcNAc, (GlcNAc)₂, and (GlcNAc)₃, hetero-chitooligosaccharides such as GlcN · GlcNAc, GlcN · GlcNAc · GlcNAc, GlcN · GlcN · GlcNAc, GlcN · GlcNAc · GlcNAc · GlcNAc, GlcNAc · GlcN · GlcNAc · GlcNAc, GlcN · GlcNAc · GlcN · GlcNAc, and GlcN · GlcN · GlcNAc · GlcNAc were identified. These results indicate that Streptomyces griseus chitinase specifically cleaves the N-acetyl-β-d-glucosaminidic linkages in partially N-acetylated chitosan.     

Quantitative fluorometric analysis of plant and microbial chitosanases.

A quantitative fluorometric assay for chitosanase activity in bacterial and plant tissues was developed. The assay can be conducted with either finely milled preparations of chitosan in suspension or dissolved chitosan; activity is based on measurements of glucosamine (GlcN) or oligomers of GlcN. GlcN is detected fluorometrically after reaction with fluorescamine with detection in the nanomole range. Fluorescence measurements of chitosanase activity and radioassay of chitinase in commercial preparations of chitinase from Streptomyces griseus revealed that both activities were present. Specific activities for the S. griseus chitosanase using suspended and soluble chitosans were respectively 1.24 and 6.4 mumol GlcN.min-1.mg protein-1. Specific activity of the S. griseus chitinase was 0.98 mumol GlcN.min-1.mg protein-1. Sweet orange callus tissue was tested for chitosanase and chitinase activity. It was necessary to remove small amine-containing molecules from the callus preparations before chitosanase activity could be assayed. The specific activity for chitinase and chitosanase in desalted extracts of nonembryogenic Valencia sweet orange callus tissue was determined to be 18.6 and 89.4 nmol GlcN.min-1.mg protein-1, respectively.     

Determination of the degree of N-acetylation and the distribution of N-acetyl groups in partially N-deacetylated chitins (chitosans) by high-field n.m.r. spectroscopy.

The composition and sequence of 2-acetamido-2-deoxy-beta-D-glucose (GlcNAc) and 2-amino-2-deoxy-beta-D-glucose (GlcN) residues in partially N-deacetylated chitosans, prepared under homogeneous and heterogeneous conditions, have been determined by 1H-n.m.r. spectroscopy. It was necessary to depolymerise the chitosan slightly by treatment with nitrous acid before spectroscopy. A sequence-dependent deshielding of H-1 of the GlcNAc residues made it possible to determine the proportions of the four possible diads. Chitosan prepared by N-deacetylation under homogeneous conditions gave values for the diad frequencies that were roughly consistent with a random distribution of the N-acetyl groups. Samples prepared under heterogeneous conditions have a frequency of the GlcNAc-GlcNAc diad slightly higher than for a random (Bernoullian) distribution. The chitosans, prepared under both homogeneous and heterogeneous conditions, with a degree of acetylation of 50% were soluble at neutral pH.     

Chitinous Component of the Cell Wall of Fusarium oxysporum,Its Structure Deduced from Chitosanase Digestion

The cell wall of Fusarium oxysporum was digested with commercial Bacillus pumilus chitosanase. The chitosanase produced low molecular weight heterooligosaccharides consisting of GlcN and GlcNAc from the cell wall. A main component of the digestion products was identified as 2-amino-2-deoxy-β-d-glucopyranosyl-(1 →4)-2-acetamido-2-deoxy-d-glucopyranose. The chitosanase appeared to be more effective than Streptomyces griseus chitinase for cell wall digestion. Moreover, maltose was unexpectedly found in the digestion products, indicating that the cell wall contains α-1,4-linked glucan chain as a polysaccharide component.     

Purification and Characterization of Chitosanase and Exo-β-D-Glucosaminidase from a Koji Mold,Aspergillus oryzae IAM2660

Chitosan-degrading activity was detected in the culture fluid of Aspergillus oryzae, A. sojae, and A. flavus among various fungal strains belonging to the genus Aspergillus. One of the strong producers, A. oryzae IAM2660 had a higher level of chitosanolytic activity when N-acetylglucosamine (GlcNAc) was used as a carbon source. Two chitosanolytic enzymes, 40 kDa and 135 kDa in molecular masses, were purified from the culture fluid of A. oryzae IAM2660. Viscosimetric assay and an analysis of reaction products by thin-layer chromatography clearly indicated the endo- and exo-type cleavage manner for the 40-kDa and 135-kDa enzymes, respectively. The 40-kDa enzyme, designated chitosanase, catalyzed a hydrolysis of glucosamine (GlcN) oligomers larger than pentamer, glycol chitosan, and chitosan with a low degree of acetylation (0-30%). The 135-kDa enzyme, named exo-β-D-glucosaminidase, released a single GlcN residue from the GlcN oligomers and chitosan, but did not release GlcNAc residues from either GlcNAc oligomer or colloidal chitin.     

Substrate induction and statistical optimization for the production of chitosanase from Microbacterium sp. OU01

The chitosanase production was markedly enhanced by substrate induction, statistical optimization of medium composition and culture conditions by Microbacterium sp. OU01 in shake-flask. A significant influence of (NH(4))(2)SO(4), MgSO(4).7H(2)O and initial pH on chitosanase production was noted with Plackett-Burman design. It was then revealed with the method of steepest ascent and response surface methodology (RSM) that 19.0g/L (NH(4))(2)SO(4), 1.3g/L MgSO(4) and an initial pH of 2.0 were optimum for the production of chitosanase; colloidal chitosan appeared to be the best inducer for chitosanase production by Microbacterium sp. OU01. This optimization strategy led to the enhancement of chitosanase from 3.6U/mL to 118U/mL.     

Kinetics of hydrolysis of chitin/chitosan oligomers in concentrated hydrochloric acid

The kinetics of hydrolysis in concentrated hydrochloric acid (12.07 M) of the fully N-acetylated chitin tetramer (GlcNAc(4)) and the fully N-deacetylated chitosan tetramer (GlcN(4)) were followed by determining the amounts of the lower DP oligomers as a function of time. A theoretical model was developed to simulate the kinetics of hydrolysis of the three different glycosidic linkages in the tetramers. The model uses two different rate constants for the hydrolysis of the glycosidic bonds in the oligomers, assuming that the glycosidic bond next to one of the end residues are hydrolysed faster than the two other glycosidic linkages. The two rate constants were estimated by fitting model data to experimental results. The results show that the hydrolysis of the tetramers is a nonrandom process as the glycosidic bonds next to one of the end residues are hydrolysed 2.5 and 2.0 times faster as compared to the other glycosidic linkages in the fully N-acetylated and fully N-deacetylated tetramer, respectively. From previous results on other oligomers and the reaction mechanism, it is likely that the glycosidic bond that is hydrolysed fastest is the one next to the nonreducing end. The absolute values for the rate constants for the hydrolysis of the glycosidic linkages in GlcNAc(4) were found to be 50 times higher as compared to the glycosidic linkages in GlcN(4), due to the catalytic role of the N-acetyl group and the presence of the positively charged amino-group on the N-deacetylated sugar residue.     

Chitosanase activity in<Emphasis Type="Italic">Bacillus thuringiensis</Emphasis>

The ability to produce extracellular chitosanase (EC 3.2.1.132) was found by plate assays in 18 (23%) out of 77 crystalliferous strains of Bacillus thuringiensis. The best chitosanase producer was selected after the growth chosen in a liquid medium with colloidal chitosan as carbon source. Enzyme production was optimized (a 4-d incubation at 32 degrees C with shaking in a medium of pH 6.5 with 4% colloidal chitosan) and the enzyme was partially characterized. This is the first report on the chitosanase of B. thuringiensis.     

Alkaline Serine Protease AprE Plays an Essential Role in Poly-γ-glutamate Production during Natto Fermentation

A thermostable chitosanase, purified 156-fold to homogeneity in an overall yield of 12.4%, has a molecular weight of about 29,000±2,000, and is composed of monomer. The enzyme degraded soluble chitosan, colloidal chitosan, and glycol chitosan, but did not degrade chitin or other β-linked polymers. The enzyme activity was increased about 2.5-fold by the addition of 10 mM Co²⁺ and 1.4-fold by Mn²⁺. However, Cu²⁺ ion strongly inhibited the enzyme. Optimum temperature and pH were 60°C and 6.5, respectively. The enzyme was stable after heat treatment at 80°C for 30 min or 70°C for 60 min and fairly stable in protein denaturants as well. Chitosan was hydrolyzed to (GlcN)₄ as a major product, by incubation with the purified enzyme. The effects of ammonium sulfate and organic solvents on the action pattern of the thermostable chitosanase were investigated. The amounts of (GlcN)₃-(GlcN)₆ were increased about 30% (w/w) in DAC 99 soluble chitosan containing 10% ammonium sulfate, and (GlcN)₁ was not produced. The monophasic reaction system consisted of DAC 72 soluble chitosan in 10% EtOH also showed no formation of (GlcN)₁, however, the yield of (GlcN)₃ ～ (GlcN)₆ was lower than DAC 99 soluble chitosan-10% ammonium sulfate. The optimal concentration of ammonium sulfate to be added was 20%. At this concentration, the amount of hexamer was increased by over 12% compared to the water-salt free system.