Exploring the antioxidant potential of lignin isolated from black liquor of oil palm waste

This study was conducted to evaluate the potential antioxidant activity of lignin obtained from black liquor, a hazardous waste product generated during the extraction of palm oil. Antioxidant potential of the extracted lignin was evaluated by dissolving the extracted samples in 2 different solvent systems, namely, 2-methoxy ethanol and DMSO. Results revealed high percent inhibition of the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical in the lignin sample dissolved in 2-methoxy ethanol over DMSO (concentration range of 1–100 μg/ml). Lignin extracted in 2-methoxy ethanol exhibited higher inhibition percentage (at 50 μg/ml, 84.2%), whereas a concentration of 100 μg/ml was found to be effective in the case of the DMSO solvent (69.8%). Fourier transform infrared (FTIR) spectrometry revealed that the functional groups from the extracted lignin and commercial lignin were highly similar, indicating the purity of the lignin extracted from black liquor. These results provide a strong basis for further applications of lignin in the food industry and also illustrate an eco-friendly approach to utilize oil palm black liquor. To cite this article: R. Bhat et al., C. R. Biologies 332 (2009).     

Influence of lignin on the methanization of lignocellulosic wastes

The effect on anaerobic digestion of reducing the lignin content of vine shoots to 1% (w/w), by treatment with sodium chlorite in an acid medium at 80°C, is reported. The yields of methane obtained were 240 ml of CH₄ g⁻¹ of VS (volatile solids) fed for untreated vine shoots, and 370 ml of CH₄ g⁻¹ of VS fed for treated vine shoots. A mathematical model was used to calculate the kinetic parameters H and μ, and the increased biodegradability of the substrate in which lignin had been removed was confirmed. A study of the mass balances of the process under optimum conditions (temperature = 35°C; loading rate of 1 g litre⁻¹ digester day⁻¹) enabled the percentage of degraded cellulose to be calculated (35·5% for untreated vine shoots, 81·5% for the treated vine shoots), as were the volumes of biogas and methane produced per gram of VS introduced (VS₁) and degraded. The blocking effect of lignin on the methanization process was confirmed.     

Ion-pair high-performance liquid chromatographic assay method for the assessment of clarithromycin stability in aqueous solution and in gastric juice

A simple and selective ion-pair HPLC method has been developed for the analysis of clarithromycin in aqueous solutions and in gastric juice. A Hypersil ODS 5-μm (150 × 4.6 mm I.D.) column was used with a mobile phase consisting of acetonitrile-aqueous 0.05 M phosphate buffer (pH 4.6) containing 5 mM 1-octanesulphonic acid (50:50, v/v). The column temperature was 50°C and detection was by UV absorption (210 nm). The limits of detection of 50-μl samples were 0.4 μg/ml (aqueous) and 0.78 μg/ml (0.5 ml gastric juice) or better. The assay was linear in the range of 1.56 to 100 μg/ml with r² values greater than 0.99. The recovery from the gastric juice samples was 98.5±2.9%. The method was applied successfully to determine the stability of clarithromycin in 0.01 M HCl and gastric juice.     

Correlation between strong adjuvanticity of Klebsiella O3 lipopolysaccharide and its ability to induce lnterleukin-1 secretion

Adjuvant activity of Klebsiella O3 lipopolysaccharide (KO3 LPS) in augmenting antibody response and delayed-type hypersensitivity to protein antigens in SMA mice was much stronger than that of LPS from Escherichia coli O55 and O127 (EO55 LPS and EO127 LPS). Relationship between strength of the adjuvant activity and that of the ability to induce interleukin-1 (IL-1) secretion by peritoneal macrophages from C3H/HeN or SMA mice was investigated using these three kinds of LPS. When supernatant samples of macrophages cultured at 37 °C for 24 hr in the presence of 5 μg/ml LPS were assayed by their mitogenic effect on thymocytes from C3H/HeJ mice, KO3 LPS induced the secretion of about four to six times greater amounts of IL-1 activity than did EO127 LPS. When concentration of LPS used for stimulation of macrophages was varied from 0.1 to 50 μg/ml, KO3 LPS induced the secretion of definitely greater amounts of IL-1 activity than did EO55 LPS and EO127 LPS throughout the LPS concentrations tested. Nearly the same amount of IL-1 activity as that produced by 10 μg/ml EO55 LPS or 50 μg/ml EO127 LPS could be produced by 1.0 μg/ml or lower concentrations of KO3 LPS.     

Density gradient separation of carborane-containing liposome from low density lipoprotein and detection by inductively coupled plasma spectrometry

Inductively coupled plasma atomic emission spectroscopy (ICP-AES) was used for analyzing the new cholesterol-based compounds (BCH, BCH-Da, BCH-Db and BCH-Dc) in liposomal formulations. Not only the boron compounds but also the phospholipid compositions of the liposome formulation were quantitatively analyzed. Reasonable limit of detection for boron (0.5?µg/ml) and phosphorous (0.09?µg/ml), respectively, was observed. ICP-MS was also utilized for analyzing BCH in a brain distribution study. The detection limit of boron analysis by ICP-MS is at least three orders of magnitude lower than of that of ICP-AES (1?ng B/ml). The method was linear in the range of 500-1?ng B/ml and the linearity correlation coefficient was 1. In addition, an ultracentrifugation method was developed to separate liposomes from low-density lipoprotein (LDL). Factors such as density gradient and size of liposomes were adjusted to optimize separation and it was observed that in conjunction to time, speed and density gradient, size of the liposome also had impact on the separation using centrifugation method. These findings show the importance of ICP-AES as an analytical method for the analysis of element-based compounds encapsulated in phospholipid vesicles.     

Degradation of alkali lignin by two ascomycetes and free radical scavenging activity of the products

Biodegradation and bioconversion of extracted alkali lignin was performed under varying concentrations of carbon and nitrogen sources, by two potential Ascomycetes ligninolytic fungus isolated from soil. Fungus, F10 was identified as Aspergillus flavus, while APF4 as Emericella nidulans based upon closed similarity with their morphology and high homology in 18S rRNA gene sequences. The alkali lignin degradation was checked in term of disappearance of lignin content and colority. Selected fungus, degraded 19–41.6% of alkali lignin (0.25%, w/v) within 21 days of incubation and reduced the colority up to 14.4–21%. The activity of ligninolytic enzymes was periodically checked. During alkali lignin degradation manganese peroxidase (13.31?U/ml), lignin peroxidase (13.73?U/ml) and laccase (0.05?U/ml) activities were observed (at highest level). The alkali lignin degradation products and functional group changes in degraded lignin were analysed through gas chromatography-mass spectroscopy (GC-MS) and solid state ¹³C-NMR spectroscopy, respectively. The functional group modifications in alkali lignin moiety, alter its biochemical property, thus fungal mediated modified alkali lignin was further tested for reactive free radical scavenging potential with respect to hydroxyl, nitric oxide and superoxide radicals. Results demonstrate that the alkali lignin undergo degradation in studied nutritional conditions (high-carbon low nitrogen) and consequently increase its free radical scavenging activity up to 1–18%.     

Histochemical and biochemical approaches to the study of phenolic compounds and peroxidases in needles of Norway spruce (Picea abies)

The three youngest age-classes of needles of Norway spruce ( Picea abies ) were collected from four sites in the Krusne Hory Mountains (Czech Republic) characterized by different levels of damage caused by environmental pollution. Histochemical methods did not reveal any differences in localization of phenolics among the needles. Mesophyll cells close to the epidermis of needles and cells around resin ducts and substomatal cavities often accumulated higher amounts of phenolics than the rest of the mesophyll cells, but this was independent of age and damage. Needles of different age- and damage-class did not show any marked changes in general lignification pattern. However, a lower intensity of histochemical detection of lignin was observed in needles from the most damaged site. This finding was confirmed by chemical analysis using thioglycolic acid. Generally, the amount of lignin in mesophyll cells was lower in damaged trees than in healthy ones. Using the Folin–Ciocalteau method, no significant differences in the total content of phenolics were observed in the needles, although HPLC revealed marked alterations in the forms of seven phenolic acids. Concentrations of conjugated forms of phenolic acids (esters and glycosides) were higher in damaged needles (255.9 μg g⁻¹ f. wt) than in healthy needles (189.8 μg g⁻¹ f. wt). By contrast, content of esterified phenolic acids incorporated into cell walls was higher in needles from healthy trees (101.1 μg g⁻¹ f. wt) than in damaged needles (78.3 μg g⁻¹ f. wt). Marked differences were also observed in the activity of soluble peroxidases, although the activity of ionically bound forms was approximately the same in healthy and damaged needles. The total amounts of chlorophylls and carotenoids decreased as environmental damage increased.     

A stability-indicating high performance liquid chromatographic (HPLC) assay for the simultaneous determination of atorvastatin and amlodipine in commercial tablets

A simple, rapid, precise and accurate isocratic reversed-phase stability-indicating HPLC method was developed and validated for the simultaneous determination of atorvastatin (AT) and amlodipine (AM) in commercial tablets. The method has shown adequate separation for AM, AT from their associated main impurities and their degradation products. Separation was achieved on a Perfectsil Target ODS-3, 5 microm, 250 mm x 4.6 mm i.d. column using a mobile phase consisting of acetonitrile-0.025 M NaH(2)PO(4) buffer (pH 4.5) (55:45, v/v) at a flow rate of 1 ml/min and UV detection at 237 nm. The drugs were subjected to oxidation, hydrolysis, photolysis and heat to apply stress conditions. The linearity of the proposed method was investigated in the range of 2-30 microg/ml (r=0.9994) for AT and 1-20 microg/ml (r=0.9993) for AM. The limits of detection were 0.65 microg/ml and 0.35 microg/ml for AT and AM, respectively. The limits of quantitation were 2 microg/ml and 1 microg/ml for AT and AM, respectively. Degradation products produced as a result of stress studies did not interfere with the detection of AT and AM and the assay can thus be considered stability-indicating.     

Critical concentrations of lincomycin and polymyxin B in the Biken assay for detection of the heat labile enterotoxin of Escherichia coli

Reproducibility of the Biken test for detection of the LT-enterotoxin of Escherichia coli was evaluated at various concentrations of lincomycin and polymyxin B sulphate. Since 14 out of 65 clinical isolates could not grow at the recommended concentration (90 μ g/ml) of lincomycin, the standard test was modified by reducing its concentration from 90 μ g/ml to 60 μ g/ml and by reducing the concentration of polymyxin B from 500 IU to 300 IU.     

Effect of copper ions on the ligninolytic enzyme complex and the antioxidant enzyme activity in the white-rot fungus Trametes trogii 46

White-rot fungi of the Phylum Basidiomycota are quite promising in ligninolytic enzyme production and the optimization of their synthesis is of particular significance. The aim of this study was to investigate the effect of enhanced concentration of copper (Cu) ions (25–1000 μg/ml) on the activity of the ligninolytic enzyme complex (laccase, Lac; lignin peroxidase, LiP; Mn-peroxidase, MnP) in Trametes trogii 4₆, as well as the changes in the antioxidant cell response. All concentrations tested reduced significantly in growth and glucose consumption. Cu ions affected the ligninolytic enzyme activity in a dose dependent manner. Concentrations in the range of 25–100 μg/ml strongly stimulated Lac production (a 5–6-fold increase compared to the control). LiP activity was also induced by Cu, with the peak value being recorded following exposure to 50 μg/ml metal ions. In contrast, the addition of Cu ions had a positive effect on MnP activity at a concentration higher than 100 μg/ml. The maximum enzyme level was achieved at 1000 μg/ml. The results obtained on superoxide dismutase and catalase activities indicated that exposure of T. trogii 4₆ mycelia to Cu ions promoted oxidative stress. Both enzyme activities were co-ordinately produced with Lac and LiP but not co-ordinately with MnP.     

Development and validation of a high-performance liquid chromatographic method for the determination of methocarbamol in human plasma

An isocratic HPLC method was developed and validated for the quantitation of methocarbamol in human plasma. Methocarbamol and internal standard in 200 μl of human plasma were extracted with ethyl acetate, evaporated to dryness and reconstituted in water. Separation was achieved on a reversed-phase C₁₈ column with a mobile phase of methanol—0.1 M potassium phosphate monobasic—water (35:10:55, v/v/v). The detection was by ultraviolet at 272 nm. Linearity was established at 1–100 μg/ml (r > 0.999). The limit of quantitation was designed as 1 μg/ml to suit pharmacokinetic studies. Inter-day precision and accuracy of the calibration standards were 1.0 to 3.6% coefficients of variance (C.V.) and −2.0 to +1.6% relative error (R.E.). Quality controls of 3, 20 and 70 μg/ml showed inter-day precision and accuracy of 2.5 to 3.6% C.V. and −0.9 to −0.4% R.E. Recovery of methocarbamol was 91.4–100.3% in five different lots of plasma. The method was shown to be applicable on different brands of C₁₈ columns.     

Development of a simplified, sensitive high-performance liquid chromatographic method using fluorescence detection to determine the concentration of UCN-01 in human plasma

UCN-01 is a naturally derived anticancer agent isolated in the culture broth of actinomyces streptomyces. We have developed a sensitive high-performance liquid chromatographic method for the determination of UCN-01 in human plasma. UCN-01 was isolated from human plasma after intravenous administration, by using 100% ice-cold acetonitrile liquid–liquid phase extraction. Liquid chromatographic separation was achieved by isocratic elution on a phenyl analytical column. The mobile phase consisted of acetonitrile–0.5 M ammonium acetate (45:55) with 0.2% triethylamine added as a modifier. The UCN-01 peak was identified from other peaks using fluorescence excitation energy and emission energy wavelengths of 310 and 410 nm, respectively. Retention time for UCN-01 was 4.2±0.5 min. The UCN-01 peak was baseline resolved, with nearest peak at 2.6 min distance. No interfering peaks were observed at the retention time of UCN-01. Peak area amounts from extracted samples were proportional over the dynamic concentration range used: 0.2 to 30 μg/ml. Mean recoveries of UCN-01 at concentrations of 0.5 and 25 μg/ml were 89 and 90.2%, respectively. Relative standard deviations for UCN-01 calibration standards ranged from 1.89 to 2.31%, with relative errors ranging from 0.3 to 11.6%. Assay precision for UCN-01 based on quality control samples of 0.50 μg/ml was ±4.86% with an accuracy of ±5.7%. For drug extracted from plasma the lowest limit of detection was 0.1 μg/ml, with the lowest limit of quantitation being 0.2 μg/ml. This method is suitable for routine analysis of UCN-01 in human plasma at concentration from 0.2 to 30 μg/ml.     

Determination of cholesterol and cortisone absorption in polyurethane : I. Methodology using size-exclusion chromatography and dual detection

A size-exclusion chromatographic method is described for measuring the absorption of the steroid-based lipids cholesterol and cortisone into Pellethane 2363, a polyurethane used in biomedical implants. The method uses refractometry and ultraviolet diode-array detection, with tetrahydrofuran as the mobile phase. Using an injection volume of 150 μl, the lower limit of accurate measurement for cholesterol (refractive index detection) was 6 μg/ml with a lower limit of detection, based on a 2:1 signal-to-noise ratio, of 0.15 μg (1 μg/ml). For cortisone (ultraviolet detection), the lower accurate limit was 0.6 μg/ml with a lower limit of 0.015 μg (0.1 μg/ml). The results show that after 44 h, 2037 μg/g cholesterol and 3131 μg/g cortisone were absorbed by the polyurethane. The method eliminates extensive sample manipulation and is sensitive to low levels of lipid in the presence of a high-molecular-mass synthetic polymer.     

Effect of structural features on enzyme digestibility of corn stover

Corn stover was pretreated with excess calcium hydroxide (0.5 g Ca(OH)2/g raw biomass) in non-oxidative and oxidative conditions at 25, 35, 45, and 55 degrees C. The enzymatic digestibility of lime-treated corn stover was affected by the change of structural features (acetylation, lignification, and crystallization) resulting from the treatment. Extensive delignification required oxidative treatment and additional consumption of lime (up to 0.17 g Ca(OH)2/g biomass). Deacetylation reached a plateau within 1 week and there were no significant differences between non-oxidative and oxidative conditions at 55 degrees C; both conditions removed approximately 90% of the acetyl groups in 1 week at all temperatures studied. Delignification highly depended on temperature and the presence of oxygen. Lignin and hemicellulose were selectively removed (or solubilized), but cellulose was not affected by lime pretreatment in mild temperatures (25-55 degrees C), even though corn stover was contacted with alkali for a long time, 16 weeks. The degree of crystallinity slightly increased from 43% to 60% with delignification because amorphous components (lignin, hemicellulose) were removed. However, the increased crystallinity did not negatively affect the 3-d sugar yield of enzymatic hydrolysis. Oxidative lime pretreatment lowered the acetyl and lignin contents to obtain high digestibility, regardless of crystallinity. The non-linear models for 3-d hydrolysis yields of glucan (Y(g)), xylan (Y(x)), and holocellulose (Y(gx)) were empirically established as a function of the residual lignin (L) for the corn stover pretreated with lime and air.     

Simultaneous determination of piroxicam and norfloxacin in biological fluids by high‐performance liquid chromatography with fluorescence detection at zero‐order emission mode

A new highly sensitive high‐performance liquid chromatographic method with fluorescence detection (HPLC–FLD) in zero‐order emission mode was developed for the first time for the simultaneous determination of piroxicam (PRX) and norfloxacin (NRF) in biological fluids. The fluorescence detector wavelengths were set at 278 nm for excitation and zero‐order mode for emission. The zero‐order emission mode produced greater sensitivity for the measurement of both drugs than a fixed emission wavelength (446 nm). The new developed method was validated according to International Conference of Harmonization (ICH) guidelines. Linearity was found to be over concentration ranges 0.001–20 μg/ml and 0.00003–0.035 μg/ml for PRX and NRF, respectively. The limits of detection were 4.87 × 10^?4 and 1.32 × 10^?5 μg/ml for PRX and NRF, and the limits of quantitation were 1.47 × 10^?3 and 4.01 × 10^?5 μg/ml, respectively. The current fluorescence method was found to be more sensitive than most commonly used analytical methods and was successfully applied for simultaneous determination of PRX and NRF in biological fluids (serum and urine) with recoveries ranging from 91.67% to 100.36% for PRX and from 96.00% to 101.43% for NRF.     

Ultra-sensitive method for determination of ethanol in whole blood by headspace capillary gas chromatography with cryogenic oven trapping

We have established an ultra-sensitive method for determination of ethanol in whole blood by headspace capillary gas chromatography (GC) with cryogenic oven trapping. After heating a blood sample containing ethanol and isobutyl alcohol (internal standard, IS) in a 7.0-ml vial at 55°C for 15 min, 5 ml of the headspace vapor was drawn into a glass syringe and injected into a GC port. All vapor was introduced into an Rtx-BAC2 wide-bore capillary column in the splitless mode at −60°C oven temperature to trap entire analytes, and then the oven temperature was programmed up to 240°C for GC measurements with flame ionization detection. The present method gave sharp peaks of ethanol and IS, and low background noise for whole blood samples. The mean partition into the gaseous phase for ethanol and IS was 3.06±0.733 and 8.33±2.19%, respectively. The calibration curves showed linearity in the range 0.02–5.0 μg/ml whole blood. The detection limit was estimated to be 0.01 μg/ml. The coefficients of intra-day and inter-day variation for spiked ethanol were 8.72 and 9.47%, respectively. Because of the extremely high sensitivity, we could measure low levels of endogenous ethanol in whole blood of subjects without drinking. The concentration of endogenous ethanol measured for 10 subjects under uncontrolled conditions varied from 0 to 0.377 μg/ml (mean, 0.180 μg/ml). Data on the diurnal changes of endogenous ethanol in whole blood of five subjects under strict food control are also presented; they are in accordance with the idea that endogenous blood ethanol is of enteric bacterial origin.     

Production,partial purification and characterization of ligninolytic enzymes from selected basidiomycetes mushroom fungi

In recent years, many research on the quantity of lignocellulosic waste have been developed. The production, partial purification, and characterisation of ligninolytic enzymes from various fungi are described in this work. On the 21st day of incubation in Potato Dextrose (PD) broth, Hypsizygus ulmarius developed the most laccase (14.83 × 10⁻⁶ IU/ml) and manganese peroxidase (24.11 × 10⁻⁶ IU/ml), while Pleurotus florida produced the most lignin peroxidase (19.56 × ⁻⁶ IU/ml). Laccase (Lac), lignin peroxidase (LiP), and manganese peroxidase (MnP), all generated by selected basidiomycetes mushroom fungi, were largely isolated using ammonium sulphate precipitation followed by dialysis. Laccase, lignin peroxidase, and manganese peroxidase purification findings indicated 1.83, 2.13, and 1.77 fold purity enhancements, respectively. Specific activity of purified laccase enzyme preparations ranged from 305.80 to 376.85 IU/mg, purified lignin peroxidase from 258.51 to 336.95 IU/mg, and purified manganese peroxidase from 253.45 to 529.34 IU/mg. H. ulmarius laccase (376.85 IU/mg) with 1.83 fold purification had the highest specific activity of all the ligninolytic enzymes studied, followed by 2.13 fold purification in lignin peroxidase (350.57 IU/mg) and manganese peroxidase (529.34 IU/mg) with 1.77-fold purification. Three notable bands with molecular weights ranging from 43 to 68 kDa and a single prominent band with a molecular weight of 97.4 kDa were identified on a Native PAGE gel from mycelial proteins of selected mushroom fungus. The SDS PAGE profiles of the mycelial proteins from the selected mushroom fungus were similar to the native PAGE. All three partially purified ligninolytic isozymes display three bands in native gel electrophoresis, with only one prominent band in enzyme activity staining. The 43 kDa, 55 kDa, and 68 kDa protein bands correspond to laccase, lignin peroxidase, and manganese peroxidase, respectively.     

Determination of sinefungin in rat plasma by high-performance liquid chromatography

A reversed-phase high-performance liquid chromatographic method for the determination of sinefungin, a new antiprotozoal drug, in rat plasma has been developed and validated. Sample preparation was performed at 4°C by deproteinization with acetonitrile. Vidarabine was used as an internal standard. Both sinefungin and vidarabine were separated on a C₁₈ column with a mobile phase of ammmonium dihydrogenphosphate-acetonitrile (95:5, v/v) and detected by ultraviolet absorbance at 260 nm. Recoveries of sinefungin from plasma were 75 ± 3.2% and 81 ± 4.8% following dosage at concentrations of 10 μg/ml and 30 μ/ml, respectively. Using 25- μl of rat plasma the limit of quantitation was 1 μg/ml sinefungin, and the assay was linear from 1 to 30 μg/ml. This method appears sensitive enough to be used in further pharmacokinetic studies of sinefungin in animal models.     

Efficient assay for the determination of atenolol in human plasma and urine by high-performance liquid chromatography with fluorescence detection

An efficient method for the determination of atenolol in human plasma and urine was developed and validated. α-Hydroxymetoprolol, a compound with a similar polarity to atenolol, was used as the internal standard in the present high-performance liquid chromatographic analysis with fluorescence detection. The assay was validated for the concentration range of 2 to 5000 ng/ml in plasma and 1 to 20 μg.ml in urine. For both plasma and urine, the lower limit of detection was 1 ng/ml. The intra-day and inter-day variabilities for plasma samples at 40 and 900 ng/ml, and urine samples at 9.5 μg/ml were <3% (n=5).     

结直肠癌血清肿瘤标记物液相芯片制备条件的优化及在CEA抗原检测中的初步应用

液相芯片技术由于其高通量,灵敏度高,信噪比高,液相条件下反应,操作简便,耗时短等优点,已被美国FDA批准成为临床的检测手段。本文主要介绍了结直肠癌血清肿瘤标记物液相芯片制备条件的优化及其在CEA抗原检测中的初步应用。本研究首先将CEA抗原的捕获抗体与微球载体进行偶联,制备液相芯片,然后对影响反应的微球与抗原的反应时间,生物素化检测抗体的浓度及avidin-PE荧光染料的反应浓度等因素进行正交设计,确定出最优的反应条件;用该液相芯片反应体系检测55例临床样本,与ELISA试剂盒检测结果相比：在同样的样本浓度范围内,两者的检测结果基本一致,但液相芯片检测的浓度范围更大而且液相芯片可将多种肿瘤标记物在一个反应进行检测,节省检测的时间和人力。