Three-dimensional image reconstruction of actin-tropomyosin complex and actin-tropomyosin-troponin T-troponin I complex.

The structure of the actin-tropomyosin complex, which represents on active form of the thin filaments of skeletal muscle and the actin-tropomyosin-troponin T-troponin I complex, which represents an inhibited form, have been studied by three-dimensional reconstruction from electron micrographs.A model of the three-dimensional structure of the actin-tropomyosin complex obtained by averaging the twelve “best” sets of data showed that the structure of the helix was polar and that the actin-tropomyosin contact was relatively loose. The detailed shape of the actin monomer and tropomyosin strands could be observed.A model of the three-dimensional structure of the actin-tropomyosin-troponin T-troponin I complex obtained by averaging the nine “best” sets of data showed that the contact between the actin and tropomyosin was very close in the inhibited filament, where the position of tropomyosin differed by approximately 10 Å from that in the active filament.The biological significance of the change in the extent of the actin-tropomyosin contact and of the movement of tropomyosin is discussed with reference to the mechanism of the regulation of muscle contraction by the tropomyosin-troponin-calcium system.     

Inhibition of actin-tropomyosin activation of myosin MgATPase activity by the smooth muscle regulatory protein caldesmon.

Caldesmon inhibition of actin-tropomyosin activation of myosin MgATPase activity was investigated. greater than 90% inhibition of ATPase activation correlated with 0.035-0.1 caldesmon bound per actin monomer over a wide range of conditions. Caldesmon inhibited sheep aorta actin-tropomyosin activation of skeletal muscle heavy meromyosin (HMM) by 85%, but had no effect on the binding affinity of HMM.ADP.Pi to actin. At ratios of 2 and 0.12 subfragment 1 (S1):1 actin, addition of caldesmon inhibited the ATPase activation by up to 95%, but did not alter the fraction of S1.ADP.Pi associated with actin-tropomyosin. We concluded that caldesmon inhibited actomyosin ATPase by slowing the rate-limiting step of the activation pathway. At concentrations comparable to the ATPase measurements, S1 displaced caldesmon from native thin filaments both in the absence (rigor) and the presence of MgATP. We therefore concluded that caldesmon could displace S1.ADP.Pi from actin-tropomyosin only under exceptional circumstances. An expressed mutant of caldesmon comprising just the C-terminal 99 amino acids bound actin 10 times weaker than whole caldesmon but otherwise inhibited actin-tropomyosin activation with the same potency and same mechanism as intact caldesmon. Thus, the entire inhibitory function of caldesmon resides in its extreme C terminus.     

Disassembly and reconstitution of the Ca2+-sensitive thin filaments of vascular smooth muscle

The Ca2+-sensitive thin filaments of aorta smooth muscle have been, disassembled into their constituent proteins, actin, tropomyosin and a 120-kDa protein. The 120-kDa protein bound to aorta actin-tropomyosin and inhibited its ability to activate myosin MgATPase. This inhibition correlated with the binding of one 120-kDa protein molecule per 29 actin monomers. Upon the addition of calmodulin to the actin-tropomyosin-120-kDa protein complex, the inhibition was relieved in 10(-4) M Ca2+ but not 10(-9) M Ca2+. The full release of inhibition was not accompanied by a full release of 120-kDa protein binding to actin-tropomyosin. A fully active, Ca2+-sensitive aorta thin filament has thus been reconstituted from just four components: actin, tropomyosin, 120-kDa protein and calmodulin.     

The mechanism of smooth muscle caldesmon-tropomyosin inhibition of the elementary steps of the actomyosin ATPase

Caldesmon is a component of smooth muscle thin filaments that inhibits the actomyosin ATPase via its interaction with actin-tropomyosin. We have performed a comprehensive transient kinetic characterization of the actomyosin ATPase in the presence of smooth muscle caldesmon and tropomyosin. At physiological ratios of caldesmon to actin (1 caldesmon/7 actin monomers) actomyosin ATPase is inhibited by about 75%. Inhibitory caldesmon concentrations had little effect upon the rate of S1 binding to actin, actin-S1 dissociation by ATP, and dissociation of ADP from actin-S1 x ADP; however the rate of phosphate release from the actin-S1 x ADP x P(i) complex was decreased by more than 80%. In addition the transient of phosphate release displayed a lag of up to 200 ms. The presence of a lag phase indicates that a step on the pathway prior to phosphate release has become rate-limiting. Premixing the actin-tropomyosin filaments with myosin heads resulted in the disappearance of the lag phase. We conclude that caldesmon inhibition of the rate of phosphate release is caused by the thin filament being switched by caldesmon to an inactive state. The active and inactive states correspond to the open and closed states observed in skeletal muscle thin filaments with no evidence for the existence of a third, blocked state. Taken together these data suggest that at physiological concentrations, caldesmon controls the isomerization of the weak binding complex to the strong binding complex, and this causes the inhibition of the rate of phosphate release. This inhibition is sufficient to account for the inhibition of the steady state actomyosin ATPase by caldesmon and tropomyosin.     

The two actin-binding regions on the myosin heads of cardiac muscle

In the presence of myosin S1 or myosin heads, actin filaments tend to form bundles. The biological meaning of the bundling of actin filaments has been unclear. In this study, we found that the cardiac myosin heads can form the bundles of actin filaments more rapidly than can skeletal S1, as monitored by light scattering and electron microscopy. Moreover, the actin bundles formed by cardiac S1 were found to be more stable against mechanical agitation. The distance between actin filaments in the bundles was approximately 20 nm, which is comparable to the length of a myosin head and two actin molecules. This suggests the direct binding of S1 tails to the adjacent actin filament. The "essential" light chain of cardiac myosin could be cross-linked to the actin molecule in the bundle. When monomeric actin molecules were added to the bundle, the bundles could be dispersed into individual filaments. The three-dimensional structure of the dispersed actin filaments was reconstructed from electron cryo-microscopic images of the single actin filaments dispersed by monomer actin. We were able to demonstrate that cardiac myosin heads bind to two actin molecules: one actin molecule at the conventional actin-binding region and the other at the essential light-chain-binding region. This capability of cardiac myosin heads to bind two actin molecules is discussed in view of lower ATPase activity and slower shortening velocity than those of skeletal ones.     

Phosphorylation by actin kinase of the pointed end domain on the actin molecule.

Fragmin from plasmodium of Physarum polycephalum binds G-actin and severs F-actin in the presence of Ca2+ over 10(-6) M. The fragmin-actin complex consisting of fragmin and G-actin nucleates actin polymerization and caps the barbed (fast growing) end of F-actin, regardless of the concentrations of Ca2+, and the actin filaments are shortened. Actin kinase purified from plasmodium abolishes the nucleation and capping activities of the complex by phosphorylating actin of the fragmin-actin complex (Furuhashi, K., and Hatano, S. (1990) J. Cell. Biol. 111, 1081-1087). This inactivation of the complex leads to production of long actin filaments. We obtained evidence that Physarum actin is phosphorylated by actin kinase at Thr-201, and probably at Thr-202 and/or Thr-203, with 1 mol of phosphate distributed among them. This finding raises the possibility that the site of phosphorylation, Thr-201 to Thr-203, is positioned on the pointed (slow growing) end domain of the actin molecule, because growth of actin filaments from the fragmin-actin complex occurs only from the pointed end. These observations are consistent with a model of the three-dimensional structure of G-actin. Inactivation of the fragmen-actin complex may follow phosphorylation of the pointed end domain of actin.     

Cryo-electron microscopy of S1-decorated actin filaments

We have applied techniques for cryo-electron microscopy, combined with image processing, to both S1-decorated native thin filaments and S1-decorated actin filaments. In our reconstruction the actin subunit has a prolate ellipsoid shape and is composed of two domains. The long axis of the monomer lies roughly perpendicular to the filament axis. The myosin head (S1) approaches the actin filament tangentially, the major interaction being with the outermost domain of actin. To distinguish the position of tropomyosin unambiguously in our map, we compared the maps from decorated thin filaments with those from decorated actin filaments. Our difference map clearly shows a peak corresponding to the position of tropomyosin; tropomyosin is bound to the inner domain of actin just in front of the myosin binding site at a radius of about 40 Å.As a first step toward looking at the actomyosin structure in a state other than rigor, we examined S1 crosslinked to actin filaments by the zero-length crosslinker EDC in the presence of ATP and after pPDM bridging of the reactive thiols of S1. S1 molecules of the crosslinked complexes in the presence of ATP and after pPDM treatment appear dramatically different from those in rigor. The S1s appear more disordered and no longer assume the characteristic rigor 45° angle with the actin filaments.     

Study of a protein complex from the brain which reduces actin viscosity. I. Composition and various properties of the complex

The method of isolation from bovine brain of a preparation containing 90 kDa- and 42 kDa-proteins is described. This preparation shortens actin filaments and therefore decreases viscosity of F-actin. The 42 kDa-component was identified as actin by one-dimensional peptide mapping. Quantitative densitometry has demonstrated that 90 kDa-protein and actin are present in the preparation in equimolar ratio. Fractionation of the preparation by gel-filtration, analytical centrifugation or electrophoresis under non-denaturing conditions showed that 90 kDa-protein and actin are in a light complex. This complex consists of one actin molecule and one molecule of 90 kDa-protein and has a sedimentation coefficient of 3.5S. Both beta- and gamma-isoelectric forms of actin are present in the complex.     

The mechanism of Ca2+ regulation of vascular smooth muscle thin filaments by caldesmon and calmodulin

The interactions of vascular smooth muscle caldesmon with actin, tropomyosin, and calmodulin were determined under conditions in which the four proteins can form reconstituted Ca2+-sensitive smooth muscle thin filaments. Caldesmon bound to actin in a complex fashion with high affinity sites (K = 10(7) M-1) saturating at a stoichiometry of 1 per 28 actins, and lower affinity sites at 1 per 7 actins. The affinity of binding was increased in the presence of tropomyosin, and this could be attributed to a direct interaction between caldesmon and tropomyosin which was demonstrated using caldesmon cross-linked to Sepharose. In the presence of tropomyosin, occupancy of the high affinity sites was associated with inhibition of actin-activated myosin MgATPase activity. Caldesmon was found to bind to calmodulin in the presence of Ca2+, with an affinity of 10(6) M-1. The binding of Ca2+ X calmodulin to caldesmon was associated with the neutralization of inhibition of actin-tropomyosin. Ca2+ X calmodulin binding reduced but did not abolish the binding of caldesmon to actin-tropomyosin. From this data we have proposed a model for smooth muscle thin filaments in which Ca2+ regulates activity by converting the inhibited actin-tropomyosin-caldesmon complex to the active complexes, actin-tropomyosin-caldesmon-calmodulin X Ca2+ and actin-tropomyosin.     

Role of caldesmon in the Ca2+ regulation of smooth muscle thin filaments: evidence for a cooperative switching mechanism

Smooth muscle thin filaments are made up of actin, tropomyosin, caldesmon, and a Ca(2+)-binding protein and their interaction with myosin is Ca(2+)-regulated. We suggested that Ca(2+) regulation by caldesmon and Ca(2+)-calmodulin is achieved by controlling the state of thin filament through a cooperative-allosteric mechanism homologous to troponin-tropomyosin in striated muscles. In the present work, we have tested this hypothesis. We monitored directly the thin filament transition between the ON and OFF state using the excimer fluorescence of pyrene iodoacetamide (PIA)-labeled smooth muscle alphaalpha-tropomyosin homodimers. In steady state fluorescence measurements, myosin subfragment 1 (S1) cooperatively switches the thin filaments to the ON state, and this is exhibited as an increase in the excimer fluorescence. In contrast, caldesmon decreases the excimer fluorescence, indicating a switch of the thin filament to the OFF state. Addition of Ca(2+)-calmodulin increases the excimer fluorescence, indicating a switch of the thin filament to the ON state. The excimer fluorescence was also used to monitor the kinetics of the ON-OFF transition in a stopped-flow apparatus. When ATP induces S1 dissociation from actin-PIA-tropomyosin, the transition to the OFF state is delayed until all S1 molecules are dissociated actin. In contrast, caldesmon switches the thin filament to the OFF state in a cooperative way, and no lag is displayed in the time course of the caldesmon-induced fluorescence decrease. We have also studied caldesmon and Ca(2+)-calmodulin-caldesmon binding to actin-tropomyosin in the ON and OFF states. The results are used to discuss both caldesmon inhibition and Ca(2+)-calmodulin-caldesmon activation of actin-tropomyosin.     

Structural relationships of actin, myosin, and tropomyosin revealed by cryo-electron microscopy

We have calculated three-dimensional maps from images of myosin subfragment-1 (S1)-decorated thin filaments and S1-decorated actin filaments preserved in frozen solution. By averaging many data sets we obtained highly reproducible maps that can be interpreted simply to provide a model for the native structure of decorated filaments. From our results we have made the following conclusions. The bulk of the actin monomer is approximately 65 X 40 X 40 A and is composed of two domains. In the filaments the monomers are strongly connected along the genetic helix with weaker connections following the long pitch helix. The long axis of the monomer lies roughly perpendicular to the filament axis. The myosin head (S1) approaches the actin filament tangentially and binds to a single actin, the major interaction being with the outermost domain of actin. In the map the longest chord of S1 is approximately 130 A. The region of S1 closest to actin is of high density, whereas the part furthest away is poorly defined and may be disordered. By comparing maps from decorated thin filaments with those from decorated actin, we demonstrate that tropomyosin is bound to the inner domain of actin just in front of the myosin binding site at a radius of approximately 40 A. A small change in the azimuthal position of tropomyosin, as has been suggested by others to occur during Ca2+-mediated regulation in vertebrate striated muscle, appears to be insufficient to eclipse totally the major site of interaction between actin and myosin.     

Three-dimensional reconstruction of the Z disk of sectioned bee flight muscle

The three-dimensional structure of the central region of the Z disk of honeybee flight muscle has been determined to a resolution of 70 A by three-dimensional reconstruction from electron micrographs of tilted thin sections. The reconstructions show a complex assembly in which actin filaments terminate and are cross-linked together; a number of structural domains of this network are resolved in quantitative three-dimensional detail. The central region of the Z disk contains two sets of overlapping actin filaments of opposite polarity, which originate in the sarcomeres adjacent to the Z disk, and connections between these filaments. The filaments are deflected by the attachment of cross-links; spacing between filaments change by greater than 100 A during their passage through the Z disk. Each actin filament is linked by connecting structures to four filaments of opposite polarity and two filaments are of the same polarity. Four types of connecting density domain are observed in association with pairs of filaments of opposite polarity: C1, C2, C3, and C5. Two of these, C3 and C5, are associated with the ends of actin filaments. Another connection, C4, is associated with three filaments of the same polarity; C4 is threefold symmetric.     

Ca2+-calmodulin binding to caldesmon and the caldesmon-actin-tropomyosin complex. Its role in Ca2+ regulation of the activity of synthetic smooth-muscle thin filaments.

We measured the concentration of calmodulin required to reverse inhibition by caldesmon of actin-activated myosin MgATPase activity, in a model smooth-muscle thin-filament system, reconstituted in vitro from purified vascular smooth-muscle actin, tropomyosin and caldesmon. At 37 degrees C in buffer containing 120 mM-KCl, 4 microM-Ca2+-calmodulin produced a half-maximal reversal of caldesmon inhibition, but more than 300 microM-Ca2+-calmodulin was necessary at 25 degrees C in buffer containing 60 mM-KCl. The binding affinity (K) of caldesmon for Ca2+-calmodulin was measured by a fluorescence-polarization method: K = 2.7 x 10(6) M-1 at 25 degrees C (60 mM-KCl); K = 1.4 x 10(6) M-1 at 37 degrees C in 70 mM-KCl-containing buffer; K = 0.35 x 10(6) M-1 at 37 degrees C in 120 mM-KCl- containing buffer (pH 7.0). At 37 degrees C/120 mM-KCl, but not at 25 degrees C/60 mM-KCl, Ca2+-calmodulin bound to caldesmon bound to actin-tropomyosin (K = 2.9 x 10(6) M-1). Ca2+ regulation in this system does not depend on a simple competition between Ca2+-calmodulin and actin for binding to caldesmon. Under conditions (37 degrees C/120 mM-KCl) where physiologically realistic concentrations of calmodulin can Ca2+-regulate synthetic thin filaments, Ca2+-calmodulin reverses caldesmon inhibition of actomyosin ATPase by forming a non-inhibited complex of Ca2+-calmodulin-caldesmon-(actin-tropomyosin).     

Characterization of three regulatory states of the striated muscle thin filament

The troponin-tropomyosin-linked regulation of striated muscle contraction occurs through allosteric control by both Ca(2+) and myosin. The thin filament fluctuates between two extreme states: the inactive "off" state and the active "on" state. Intermediate states have been proposed from structural studies and transient kinetic measurements. However, in contrast to the well-characterised, on and off states, the mechanochemical properties of the intermediate states are much less well understood because of the instability of those states. In the present study, we have characterized a myosin-induced intermediate that is stabilized by cross-linking myosin motor domains (S1) to actin filaments (with a maximum of one S1 molecule for 50 actin monomers). A single S1 molecule is known to interact with two adjacent actin monomers. A detailed analysis revealed that thin filaments containing S1 molecules cross-linked to just one actin monomer (actin(1)-S1 complexes) are regulated with a 79% inhibition of the ATPase in the absence of Ca(2+). In contrast, filaments containing S1 molecules cross-linked at two positions, to two adjacent actin monomers (actin(2)-S1 complexes) totally lose their regulation in a highly cooperative manner. This loss of regulation was due both to an enhancement of the ATPase activity without calcium and an inhibition of the ATPase with calcium. Filaments containing actin(2)-S1 complexes, with significant ATPase activity in the absence of calcium (about 50%), did not move on a myosin-coated surface unless calcium was present. This partial uncoupling between the ATPase activity and in vitro motility in the absence of calcium demonstrates that the mechanical steps require actin-myosin contacts, which take place only in the on state and not in the off or intermediate states. These data provide new insights concerning the difference in cooperativity of Ca(2+) regulation that exists between the biochemical and mechanical cycles of the actin-myosin motor.     

Caldesmon reduces the apparent rate of binding of myosin S1 to actin-tropomyosin

Equilibrium measurements of the rate of binding of caldesmon and myosin S1 to actin-tropomyosin from different laboratories have yielded different results and have led to different models of caldesmon function. An alternate approach to answering these questions is to study the kinetics of binding of both caldesmon and S1 to actin. We observed that caldesmon decreased the rate of binding of S1 to actin in a concentration-dependent manner. The inhibition of the rate of S1 binding was enhanced by tropomyosin, but the effect of tropomyosin on the binding was small. Premixing actin with S1 reduced the amplitude (extent) of caldesmon binding in proportion to the fraction of actin that contained bound S1, but the rate of binding of caldesmon to free sites was not greatly altered. No evidence for a stable caldesmon-actin-tropomyosin-S1 complex was observed, although S1 did apparently bind to gaps between caldesmon molecules. These results indicate that experiments involving caldesmon, actin, tropomyosin, and myosin are inherently complex. When the concentration of either S1 or caldesmon is varied, the amount of the other component bound to actin-tropomyosin cannot be assumed to remain fixed. The results are not readily explained by a mechanism in which caldesmon acts only by stabilizing an inactive state of actin-tropomyosin. The results support regulatory mechanisms that involve changes in the actin-S1 interaction.     

Bundling of actin filaments by aorta caldesmon is not related to its regulatory function

Ca2+-sensitive thin filaments from vascular smooth muscle were disassembled into their constituent proteins, actin, tropomyosin and caldesmon. Caldesmon bound to both actin and to actin-tropomyosin and inhibited actin-tropomyosin activation of skeletal muscle myosin MgATPase. It also promoted the aggregation of actin or actin-tropomyosin into parallel aligned bundles. Quantitative electron microscopy measurements showed that with 1.1 microM actin-tropomyosin, 1.6 +/- 0.5% (n = 3) of the filaments were in bundles. At 0.073 microM, caldesmon inhibited MgATPase activity by 50%, whereas bundling was 3.0 +/- 1.3% (n = 4). At 0.37 microM caldesmon, MgATPase inhibition was 83% while 28.1 +/- 6.9% (n = 4) of filaments were in bundles. Experiments at 4.4 microM in which MgATPase and bundling were measured in the same samples gave similar results. Small bundles of 2-3 filaments showed the most frequent occurrence at 1.1 microM actin. At 4.4 microM actin the most common bundle size was 3-5 filaments, with the occasional occurrence of large bundles consisting of up to 120 filaments. The incidence of bundling was the same in the presence and absence of tropomyosin. Thus caldesmon can induce the formation of actin bundles but this property bears no relationship to its inhibition of MgATPase activity.     

The axial alpha-helices and radial spokes in the core of the cryo-negatively stained complex flagellar filament of Pseudomonas rhodos: recovering high-resolution details from a flexible helical assembly

Of the two known "complex" flagellar filaments, those of Pseudomonas are far more flexible than those of Rhizobium. Their diameter is larger and their outer three-start ridges and grooves are more prominent. Although the symmetry of both complex filaments is similar, the polymer's linear mass density and the flagellin molecular mass of the latter are lower. A recent comparison of a three-dimensional reconstruction of the filament of Pseudomonas rhodos to that of Rhizobium lupini indicates that the outer flagellin domain (D3) is missing in R.lupini. Here, we concentrate on the structure of the inner core of the filament of P.rhodos using field emission cryo-negative staining electron microscopy and a hybrid helical/single particle reconstruction technique. Averaging 158 filaments caused the density band corresponding to the radial spokes to nearly average out due to their variability and inferred flexibility. Treating the Z=0 cross-sections through the aligned individual three-dimensional density maps as images, classifying them by correspondence analysis (using a mask containing the radial spokes domain) and re-averaging the subclasses (using helical reconstruction techniques) allowed a recovery of the radial spokes and resolved the alpha-helices in domain D0 and the triple alpha-helical bundles in domain D1 at a resolution of 1/7A(-1). Although the perturbed components of the helical lattice are present along the entire filament's radius, the interior of the complex filament is similar to that of the plain one, whereas it's exterior is altered. Reconstructions of vitrified and cryo-negatively stained plain, right-handed filaments of Salmonella typhimurium SJW1655 prepared and imaged under conditions identical with those used for P.rhodos confirm the similarity of their inner cores and that the secondary structures in the interior of the flagellar filament can, under critical conditions of image recording and correction, be resolved in negative stain.     

The effect of Mg-ADP on the structural state of actin in the F-actin-myosin subfragment-1 complex]

Using polarized microfluorometry techniques, a study was made on the orientation and mobility of fluorescent probes 1,5-IAEDANS and rhomadin-phalloidin, located in various parts of actin, muscle fibers free of myosin, tropomyosin and troponin (ghost fibres) being used. It was found that the binding of a myosin subfragment 1 (S1) to actin induced changes in polarized fluorescence of the fibers. The analysis of these data showed that the formation of actin-S1 and actin-S1-ADP complexes in a muscle fiber resulted in a decrease in the angle between the thin filaments and the emission dipole of phalloidin-rhodamine, as well as in an increase of the mobility of this dye. In the experiments with the 1,5-IAEDANS label the angle of emission dipole increased, while the mobility of the label decreased. These changes were smaller in the presence of Mg-ADP than in its absence. It is assumed that the changes in actin monomer structure occur when a myosin head interacts with actin. These changes are expressed as those in orientation and mobility of large and small domains of actin in thin filaments. The domain orientation in actomyosin complex changes, influenced by Mg-ADP. The data obtained allow to propose the involvement of interdomain motions of some parts of actin monomer in the mechanisms of muscle contraction.     

The effects of smooth muscle caldesmon on actin filament motility.

The movement of reconstituted thin filaments over an immobilized surface of thiophosphorylated smooth muscle myosin was examined using an in vitro motility assay. Reconstituted thin filaments contained actin, tropomyosin, and either purified chicken gizzard caldesmon or the purified COOH-terminal actin-binding fragment of caldesmon. Control actin-tropomyosin filaments moved at a velocity of 2.3 +/- 0.5 microns/s. Neither intact caldesmon nor the COOH-terminal fragment, when maintained in the monomeric form by treatment with 10 mM dithiothreitol, had any effect on filament velocity; and yet both were potent inhibitors of actin-activated myosin ATPase activity, indicating that caldesmon primarily inhibits myosin binding as reported by Chalovich et al. (Chalovich, J. M., Hemric, M. E., and Velaz, L. (1990) Ann. N. Y. Acad. Sci. 599, 85-99). Inhibition of filament motion was, however, observed under conditions where cross-linking of caldesmon via disulfide bridges was present. To determine if monomeric caldesmon could "tether" actin filaments to the myosin surface by forming an actin-caldesmon-myosin complex as suggested by Chalovich et al., we looked for caldesmon-dependent filament binding and motility under conditions (80 mM KCl) where filament binding to myosin is weak and motility is not normally seen. At caldesmon concentrations > or = 0.26 microM, actin filament binding was increased and filament motion (2.6 +/- 0.6 microns/s) was observed. The enhanced motility seen with intact caldesmon was not observed with the addition of up to 26 microM COOH-terminal fragment. Moreover, a molar excess of the COOH-terminal fragment competitively reversed the enhanced binding seen with intact caldesmon. These results show that tethering of actin filaments to myosin by the formation of an actin-caldesmon-myosin complex enhanced productive acto-myosin interaction without placing a significant mechanical load on the moving filaments.     

Three-dimensional image analysis of the complex of thin filaments and myosin molecules from skeletal muscle. III. The multi-domain structure of actin-heavy meromyosin complex

Heavy meromyosin (HMM) prepared by chymotryptic digestion retains DTNB light chain and subfragment-2 (S2) in addition to the two subfragment-1 (S1) moieties. The electron micrograph of negatively stained rigor complex of HMM and actin showed some different features as compared with that of S1 and actin. The three-dimensional image reconstructed from the electron micrograph of actin-HMM gave additional domains other than those observed in actin-S1 (Wakabayashi and Toyoshima, 1981). The differences between the images of actin-HMM and actin-S1 were attributed to the differences in protein composition. Further, the structural characteristics of actin-HMM are discussed in comparison with those of the actin-S1.