Effects of temperature on Escherichia coli overproducing beta-lactamase or human epidermal growth factor

The effects of temperature on strains of Escherichia coli which overproduce and excrete either beta-lactamase or human epidermal growth factor were investigated. E. coli RB791 cells containing plasmid pKN which has the tac promoter upstream of the gene for beta-lactamase were grown and induced with isopropyl-beta-D-thiogalactopyranoside in batch culture at 37, 30, 25, and 20 degrees C. The lower temperature greatly reduced the formation of periplasmic beta-lactamase inclusion bodies, increased significantly the total amount of beta-lactamase activity, and increased the purity of extracellular beta-lactamase from approximately 45 to 90%. Chemostat operation at 37 and 30 degrees C was difficult due to poor cell reproduction and beta-lactamase production. However, at 20 degrees C, continuous production and excretion of beta-lactamase were obtained for greater than 450 h (29 generations). When the same strain carried plasmid pCU encoding human epidermal growth factor, significant cell lysis was observed after induction at 31 and 37 degrees C, whereas little cell lysis was observed at 21 and 25 degrees C. Both total soluble and total human epidermal growth factor increased with decreasing temperature. These results indicate that some of the problems of instability of strains producing high levels of plasmid-encoded proteins can be mitigated by growth at lower temperatures. Further, lower temperatures can increase for at least some secreted proteins both total plasmid-encoded protein formed and the fraction that is soluble.     

Expression of beta-lactamase by recombinant Escherichia coli strains containing plasmids of different sizes--effects of pH, phosphate, and dissolved oxygen

The characteristics of growth and synthesis of plasmid-encoded protein were studied for strains of recombinant E. coli JM103 which carried the beta-lactamase gene on plasmids of different sizes. The plasmids used included the vector pUC8 and its recombinant derivatives containing varying-sized inserts of Drosophila DNA (not expressed in E. coli). Luria broth (LB) and a minimal medium (M9) supplemented in some cases with additional inorganic phosphate were used as growth media. There was no evidence of segregational instability in these experiments, where no antibiotic selection pressure was employed. Responses of the recombinant strains to variations in environmental parameters including pH, phosphate concentration in the medium, and aeration rate were examined. While the cell growth rate in LB decreased with pH in the range 7.0-8.0, the bulk beta-lactamase activity was maximized at an intermediate pH. The recombinant cell growth rate decreases with increasing plasmid size in the minimal medium, while such decrease is not significant when a rich medium such as LB is used. There is an intermediate plasmid size in the range studied (2.7-8.7 kb), at which beta-lactamase activity is maximum. While reduction in aeration rate (which determines the dissolved oxygen level) is detrimental for cell growth, it is beneficial for beta-lactamase synthesis. The bulk beta-lactamase activity therefore exhibits a maximum with respect to aeration rate. Cell growth and beta-lactamase production are affected in a similar manner by phosphate concentration in the minimal medium and therefore both are maximized at the same phosphate concentration. This investigation demonstrates clearly how the production of a recombinant plasmid-encoded protein can be maximized by proper manipulation of culture conditions and how it is affected by plasmid size.     

Effect of a broad-host range plasmid on growth dynamics of Escherichia coli and Pseudomonas putida

Host-plasmid interactions were studied for the broad-host range plasmid, pTJS26, a derivative of RK2. To isolate host and plasmid contributions to the growth dynamics and plasmid stability, separate experiments were performed with host and recombinant cells for two different gram-negative hosts, Pseudomonas putida and Escherichia coli, at two different temperatures, 30 and 37 degrees C. At the lower temperature (30 degrees C) the growth kinetics were not affected by the plasmid, but plasmid instability was observed. At the higher temperature (37 degrees C) growth rates and yields were lower than that for the hosts, but the plasmid was stable. This behavior can be explained by a combination of two phenomena. First, the copy number control mechanism may be temperature sensitive and, second, plasmid segregation may be inefficient. For both E. coli and P. putida the growth dynamics of the recombinant system was dictated by the presence of the plasmid.     

Altered temperature induction sensitivity of the lambda pR/cI857 system for controlled gene E expression in Escherichia coli

Cell lysis of Gram-negative bacteria can be efficiently achieved by expression of the cloned lysis gene E of bacteriophage PhiX174. Gene E expression is tightly controlled by the rightward lambda pR promoter and the temperature-sensitive repressor cI857 on lysis plasmid pAW12. The resulting empty bacterial cell envelopes, called bacterial ghosts, are currently under investigation as candidate vaccines. Expression of gene E is stringently repressed at temperatures up to 30 degrees C, whereas gene E expression, and thus cell lysis, is induced at temperatures higher than 30 degrees C due to thermal inactivation of the cI857 repressor. As a consequence, the production of ghosts requires that bacteria have to be grown at 28 degrees C before the lysis process is induced. In order to reflect the growth temperature of pathogenic bacteria in vivo, it seemed favorable to extend the heat stability of the lambda pR promoter/cI857 repressor system, allowing pathogens to grow at 37 degrees C before induction of lysis. In this study we describe a mutation in the lambda pR promoter, which allows stringent repression of gene E expression at temperatures up to 36 degrees C, but still permits induction of cell lysis at 42 degrees C.     

Nature of Escherichia coli cell lysis by culture supernatants of Bacillus species.

Escherichia coli cells were found to be sensitive to lysis by the supernatants of a variety of protease-positive Bacillus species when treated at 45 degrees C but not when treated at 37 degrees C. Different E. coli strains manifested different lysis sensitivities when treated at 45 degrees C. When the lysis rates of E. coli cells at various stages of growth were investigated, post-exponential-phase cells were shown to be most sensitive to lysis. The lysis rate was inversely related to cell viability, and susceptibility appeared to be at least partly due to lysis of dead E. coli cells. A close relation was observed between levels of lysis activity and proteolytic activity. A Bacillus subtilis mutant lacking alkaline and neutral protease activity failed to lyse E. coli cells. It was concluded that Bacillus proteases played a major role in the observed E. coli lysis.     

Nature of Escherichia coli cell lysis by culture supernatants of Bacillus species

Escherichia coli cells were found to be sensitive to lysis by the supernatants of a variety of protease-positive Bacillus species when treated at 45 degrees C but not when treated at 37 degrees C. Different E. coli strains manifested different lysis sensitivities when treated at 45 degrees C. When the lysis rates of E. coli cells at various stages of growth were investigated, post-exponential-phase cells were shown to be most sensitive to lysis. The lysis rate was inversely related to cell viability, and susceptibility appeared to be at least partly due to lysis of dead E. coli cells. A close relation was observed between levels of lysis activity and proteolytic activity. A Bacillus subtilis mutant lacking alkaline and neutral protease activity failed to lyse E. coli cells. It was concluded that Bacillus proteases played a major role in the observed E. coli lysis.     

掺入大肠杆菌膜中的磷脂酰胆碱(PC)影响青霉素b-内酰胺酶的分泌

[目的]为了研究磷脂酰胆碱(PC)在原核生物细胞中的生物学作用,探讨PC对细菌膜系统的功能的影响.[方法]使用ptac 85质粒作载体,将螺旋菌pcs基因导入E.coli Top10细胞构建了E.coli Fop10 pcs 菌株,并在特定的条件下培养细菌,使细菌膜磷脂中合成30%左右的磷脂酰胆碱.然后再使用抗生素抗性分析、β-内酰胺酶的酶活测定以及Western blot杂交技术,分析质粒编码的β-内酰胺酶从细胞质到细胞问质的分泌情况.[结果]抗生素抗性分析发现,高浓度的氨苄青霉素抑制E.coliTop10 pcs 细菌的生长的氨苄青霉素剂量低于对照组,其半致死剂量IC50在700～800μg/mL之间.酶活检测显示E.coli Top10 pcs 细菌周质内β-内酰胺酶的酶活性只有对照菌株的1,5,Western blot进一步分析发现周质内β-内酰胺酶的含量也为对照菌株的1/5.由此可见,周质内低含量的β-内酰胺酶是导致E.coli Top10pcs 细菌氨苄青霉素抗性降低的原因.[结论]掺入细菌膜磷脂双分子层的PC影响p.内酰胺酶通过Sec转运途径从细胞质分泌到细菌周质空间内,提示细菌磷脂酰胆碱可能在调节蛋白转运和分泌方面起着重要的作用.     

大肠杆菌生长温度、膜脂肪酸组成和压力抗性之间的关系

通过对大肠杆菌生长温度、膜脂肪酸组成和压力抗性之间关系研究发现,10℃培养,对数期细胞有最大的压力抗性,随着培养温度的升高直到4 5℃,压力抗性呈下降的趋势;相反,10℃培养,稳定期的细胞对压力最敏感,随着培养温度的升高,压力抗性呈增加趋势,30～37℃时达到最大,之后到4 5℃有下降。对数期和稳定期细胞膜脂中不饱和脂肪酸的组成随温度的上升而下降,这与从全细胞中抽提的磷脂的熔点密切相关。因此,对数期细胞压力抗性随着膜流动性的增大而升高;但稳定期细胞,膜流动性与压力抗性之间不存在简单的对应变化关系     

Virulence plasmid-associated adhesion of Escherichia coli and its significance for chlorine resistance

Introduction of the ColV, I-K94 virulence plasmid into strains of Escherichia coli led (for four out of five strains tested) to a marked increase in the ability of organisms to adhere to glass beads. For strain 1829, the plasmid led to increased attachment to other materials including sand, agar, agarose, chitin and cellulose. The increased adhesion to glass beads was due to the presence of the plasmid and not to its introduction into a variant with altered adhesive properties. The plasmid-encoded VmpA protein did not appear to be necessary for the ColV, I-K94-promoted adhesion but adhesion was absolutely dependent on the presence of derepressed levels of transfer components in the ColV+ strains and partially dependent on the presence of colicin components. The extent of the plasmid-promoted adhesion was greatest for organisms grown at 30 degrees, 37 degrees or 42 decrees C and adhesion was almost abolished by growth at 21 degrees or 25 degrees C; this finding is in accord with transfer and colicin components being involved in adhesion. Of several other plasmids tested for their effects on adhesion, those with derepressed transfer properties showed a marked effect as did the RI resistance plasmid. Because of the ease of handling glass bead-attached organisms, such preparations were used as a model for studying the relevance of attachment to the resistance of E. coli to chlorination in the water purification process. Organisms of 1829 ColV, I-K94, attached to glass beads, were more resistant to damage and killing by chlorine than were unattached organisms. Three findings suggest that such chlorine resistance may be significant for survival during water chlorination. Firstly, ColV, I-K94+ bacteria became attached if incubated in sewage effluent with glass beads at 20 degrees C. Secondly, ColV+ organisms already attached to glass beads maintained their attachment during 24 h incubation in effluent at 20 degrees C and thirdly such effluent incubated organisms remained chlorine resistant provided that they retained their attachment.     

Recombinant protein excretion in Escherichia coli JM103[pUC8]: Effects of plasmid content, ethylenediaminetetraacetate, and phenethyl alcohol on cell membrane permeability

The presence of a high copy number plasmid (pUC8) was found to affect integrity of the cell envelope of Escherichia coli JM103, causing in turn significant release of the plasmid-encoded protein (beta-lactamase). The alterations in cell membrane permeability were evident from the increased susceptibility of recombinant cells to deoxycholic acid and methylene blue, which did not have appreciable effect on plasmid-free cells. The deteriorated cell membrane structure also resulted in a substantial reduction in specific growth rate and mass yield of plasmid-bearing cells. Further enhancement in beta-lactamase excretion was achieved by permeabilizing cell membrane with ethylenediaminetetraacetate (EDTA) and phenethyl alcohol (PEA). Unlike other commonly used physical and chemical methods for releasing the enzymes accumulated in the cells, application of EDTA and PEA at appropriate concentrations neither led to cell death nor interrupted synthesis of the plasmid-encoded protein. While in situ application of PEA was complicated due to interference with beta-lactamase activity, in situ application of EDTA was found to be an efficient way of releasing the recombinant protein without sacrificing its productivity. The experimental results demonstrate that the presence of EDTA and PEA can substantially reduce the growth rate differential between plasmid-free and plasmid-bearing cells, suggesting possible improvement of plasmid stability by application of these cell membrence-permeabilizing agents on a periodic basis.     

Requirement for a functional host cell autolytic enzyme system for lysis of Escherichia coli by bacteriophage phi X174

Escherichia coli VC30 is a temperature-sensitive mutant which is defective in autolysis. Strain VC30 lyses at 30 degrees C when treated with beta-lactam antibiotics or D-cycloserine or when deprived of diaminiopimelic acid. The same treatments inhibit growth of the mutant at 42 degrees C but do not cause lysis. Strain VC30 was used here to investigate the mechanism of host cell lysis induced by bacteriophage phi X 174. Strain VC30 was transformed with plasmid pUH12, which carries the cloned lysis gene (gene E) of phage phi X174 under the control of the lac operator-promoter, and with plasmid pMC7, which encodes the lac repressor to keep the E gene silent. Infection of strain VC30(pUH12)(pMC7) with phage phi X174 culminated in lysis at 30 degrees C. At 42 degrees C, intracellular phage development was normal, but lysis did not occur unless a temperature downshift to 30 degrees C was imposed. Similarly, induction of the cloned phi X174 gene E with isopropyl-beta-D-thiogalactoside resulted in lysis at 30 degrees C but not at 42 degrees C. Temperature downshift of the induced culture to 30 degrees C resulted in lysis even in the presence of chloramphenicol. These results indicate that host cell lysis by phage phi X174 is dependent on a functional cellular autolytic enzyme system.     

Isolation and characterization of autolysis-defective mutants of Escherichia coli that are resistant to the lytic activity of seminalplasmin.

Two temperature-sensitive autolysis-defective mutants of Escherichia coli were isolated and shown to be resistant to lysis induced by seminalplasmin, an antimicrobial protein from bovine seminal plasma, as well as to lysis induced by ampicillin, D-cycloserine and nocardicin, at 37 or 42 degrees C but not at 30 degrees C. The mutants were, however, sensitive to inhibition of RNA synthesis by seminalplasmin even at the nonpermissive temperature. Temperature-resistant revertants of the mutants were sensitive to lysis induced by the various antibiotics at 37 or 42 degrees C. The mutations in both strains were mapped at 58 min on the E. coli linkage map. The lysis resistance of the mutants was phenotypically suppressed by the addition of NaCl. Partial suppression of the lysis-resistant phenotype was also observed in a relA genetic background.     

A continuous thermal lysis procedure for the large-scale preparation of plasmid DNA

There is an increasing interest and need for the development of scaleable process for the preparation of plasmid DNA for vaccines and gene therapy. In this report, we describe a streamline modified process of plasmid extraction based on boiling lysis in order to simplify the operation and process large volumes of Escherichia coli cultures. The bacteria, harvested using a hollow fiber cartridge after fermentation, were treated with lysozyme at 37 degrees C prior to passing through a heat-exchanger coil. Subsequently, the supernatant was separated from lysed bacteria using a 65 microm nylon filter. The employment of a peristaltic pump and two heating coils at constant temperature without the use of centrifugation enabled the process protocol to be constant and controllable. A relatively low lysis temperature of approximately 70-80 degrees C and a buffer modified for the high-density cultures were also optimized for the process. Prior to thermal lysis, a pre-treatment step with the lysozyme for 20 min at 37 degrees C was one of the crucial steps contributing to the high plasmid quantity and quality from batch to batch. After harvesting 17 L of E. coli cultures (OD600 = 50), the plasmid can be extracted within 45 min with this streamline protocol. The plasmid yields are approximately 100mg/L culture, which makes it attractive and promising for the large-scale preparation of plasmid.     

Role of membrane fluidity in pressure resistance of Escherichia coli NCTC 8164

The relationship among growth temperature, membrane fatty acid composition, and pressure resistance was examined in Escherichia coli NCTC 8164. The pressure resistance of exponential-phase cells was maximal in cells grown at 10 degrees C and decreased with increasing growth temperatures up to 45 degrees C. By contrast, the pressure resistance of stationary-phase cells was lowest in cells grown at 10 degrees C and increased with increasing growth temperature, reaching a maximum at 30 to 37 degrees C before decreasing at 45 degrees C. The proportion of unsaturated fatty acids in the membrane lipids decreased with increasing growth temperature in both exponential- and stationary-phase cells and correlated closely with the melting point of the phospholipids extracted from whole cells examined by differential scanning calorimetry. Therefore, in exponential-phase cells, pressure resistance increased with greater membrane fluidity, whereas in stationary-phase cells, there was apparently no simple relationship between membrane fluidity and pressure resistance. When exponential-phase or stationary-phase cells were pressure treated at different temperatures, resistance in both cell types increased with increasing temperatures of pressurization (between 10 and 30 degrees C). Based on the above observations, we propose that membrane fluidity affects the pressure resistance of exponential- and stationary-phase cells in a similar way, but it is the dominant factor in exponential-phase cells whereas in stationary-phase cells, its effects are superimposed on a separate but larger effect of the physiological stationary-phase response that is itself temperature dependent.     

Effects of recombinant plasmid content on growth properties and cloned gene product formation in Escherichia coli

Plasmid-host cell interactions have been investigated experimentally using Escherichia coli HB101, plasmid RSF1050 which contains the origin of replication of pMB1, and four other closely related copy number mutant plasmids. Growth characteristics of these recombinant strains and beta-lactamase activity expressed from a plasmid gene were investigated in Luria broth (LB) and in minimal medium (M9) containing in some cases casamino acids or different concentrations of alpha-methylglucoside, a competitive inhibitor of glucose transport. Maximum specific growth rates in LB and minimal media were reduced for increasing plasmid content per cell. Plasmid copy number increased when specific growth rate was reduced by changing medium composition. Growth rates of high copy number strains were less sensitive to alpha-methylglucoside than lower copy number strains and the plasmidfree host. The overall efficiency of plasmid gene expression, measured as the ratio of beta-lactamase specific activity to plasmid content, decreased significantly with increasing plasmid content in LB medium.     

Nod Bj-V (C18:1, MeFuc) production by Bradyrhizobium japonicum (USDA110, 532C) at suboptimal growth temperatures

Nod factors (Lipo-chitooligosaccharides, or LCOs) act as bacteria-to-plant signal molecules that modulate early events of the Bradyrhizobium-soybean symbiosis. It is known that low root zone temperature inhibits the early stages of this symbiosis; however, the effect of low soil temperature on bacteria-to-plant signaling is largely uninvestigated. We evaluated the effect of low growth temperatures on the production kinetics of Nod factor (LCO) by B. japonicum. Two strains of B. japonicum, 532C and USDA110, were tested for ability to synthesize Nod Bj-V (C(18:1), MeFuc) at three growth temperatures (15, 17 and 28 degrees C). The greatest amounts of the major Nod factor, Nod Bj-V (C(18:1), MeFuc), were produced at 28 degrees C for both strains. At 17 and 15 degrees C, the Nod factor production efficiency, per cell, of B. japonicum 532C and USDA110 was markedly decreased with the lowest Nod factor concentration per cell occurring at 15 degrees C. Strain 532C was more efficient at Nod factor production per cell than strain USDA 110 at all growth temperatures. The biological activity of the extracted Nod factor was unaffected by culture temperature. This study constitutes the first demonstration of reduced Nod factor production efficiency (per cell production) under reduced temperatures, suggesting another way that lower temperatures inhibit establishment of the soybean N(2) fixing symbiosis.     

Plasmid pR386 renders Escherichia coli cells restrictive to the growth of bacteriophage T4 unf mutants.

The introduction of the F1 incompatibility group plasmid pR386 Tc into several common laboratory strains of Escherichia coli rendered them restrictive to the growth of bacteriophage T4 unf mutants, which are defective in unfolding the host genome. The growth inhibition was temperature dependent. The single mutant unf39 x 5 exhibited an efficiency of plating of less than 10(-8) at 27 degrees C. However, at 37 degrees C, complete growth inhibition occurred only when host DNA degradation was also absent.     

The effect of Mg 2+ ions on the properties of various strains of Yersinia pestis

The strains of Yersinia pestis that restrict their growth on the media deficient for Mg2+ ions at 37 degrees C have been found. The bacterial cell lysis is registered under these conditions. The effect of Yersinia pestis own plasmids on the level of growth restriction in the absence of Mg2+ ions has been studied. The phenomenon is not connected with the presence of the plasmid determining Ca2(+)-dependence. The presence of 6Md plasmid coding for pesticinogenicity increased the frequency of colony formation, while the heavy plasmid determining the production of "mouse" toxin favoured the increase in growth restriction on Mg2(+)-less media. The clones growing under the latter conditions acquire the rearrangements in the DNA of the plasmid coding for the "mouse" toxin.     

The effect of temperature and selective agents on the growth of Yersinia enterocolitica serotype O:3 in pure culture

This study examined the individual and combined effects of the selective agents normally present in Yersinia-selective agar (i.e. cefsulodin, irgasan and novobiocin) on the growth kinetics of plasmid-bearing (P+) and plasmid-cured (P-) Yersinia enterocolitica serotype O:3 at 25 and 37 degrees C. Growth studies were carried out in pure culture, and the data obtained were subjected to linear regression analysis to determine lag phase duration(s) and growth rates of the examined strains. In general, the presence of selective agents increased the duration of the lag phase at 37 degrees C, with longer lag phases noted in all cases in which two or more selective agents were present. Growth rates in CIN broth base (CIN NA) and CIN NA plus commercial supplement (SR 109) (CIN) were faster at 37 than 25 degrees C, but in some cultures of incomplete CIN NA broth with less than three supplements added, growth tended to be faster at 25 than 37 degrees C. Generally, plasmid-bearing strains grew slower than plasmid-cured strains in most media at 37 degrees C due to virulence plasmid expression retarding growth. In some instances at 37 degrees C, it was observed that the growth rates of both plasmid-bearing and plasmid-cured strains were comparable, indicating the influence of added selective agent/s negating any effects associated with virulence plasmid expression. The effects of selective agents, incubation temperature and virulence plasmid carriage on the growth kinetics of Y. enterocolitica are discussed.