Biomechanical analysis of foot with different foot arch heights: a finite element analysis

Clinically, different foot arch heights are associated with different tissue injuries to the foot. To investigate the possible factors contributing to the difference in foot arch heights, previous studies have mostly measured foot pressure in either low-arched or high-arched feet. However, little information exists on stress variation inside the foot with different arch heights. Therefore, this study aimed to implement the finite element (FE) method to analyse the influence of different foot arches. This study established a 3D foot FE model using software ANSYS 11.0. After validating the FE model, this study created low-arched, high-arched and normal-arched foot FE models. The FE analysis found that both the stress and strain on the plantar fascia and metatarsal were higher in the high-arched foot, whereas the stress and strain on the calcaneous, navicular and cuboid were higher in low-arched foot. Additionally, forefoot pressure was increased with an increase in arch height.     

Biomechanical analysis of foot with different foot arch heights: a finite element analysis

Clinically, different foot arch heights are associated with different tissue injuries to the foot. To investigate the possible factors contributing to the difference in foot arch heights, previous studies have mostly measured foot pressure in either low-arched or high-arched feet. However, little information exists on stress variation inside the foot with different arch heights. Therefore, this study aimed to implement the finite element (FE) method to analyse the influence of different foot arches. This study established a 3D foot FE model using software ANSYS 11.0. After validating the FE model, this study created low-arched, high-arched and normal-arched foot FE models. The FE analysis found that both the stress and strain on the plantar fascia and metatarsal were higher in the high-arched foot, whereas the stress and strain on the calcaneous, navicular and cuboid were higher in low-arched foot. Additionally, forefoot pressure was increased with an increase in arch height.     

Determinants of difference in leg stiffness between endurance- and power-trained athletes

Understanding the leg and joint stiffness during human movement would provide important information that could be utilized for evaluating sports performance and for injury prevention. In the present study, we examined the determinants of the difference in the leg stiffness between the endurance-trained and power-trained athletes. Seven distance runners and seven power-trained athletes performed in-place hopping, matching metronome beats at 3.0 and 1.5Hz. Leg and joint stiffness were calculated from kinetic and kinematics data. Electromyographic activity (EMG) was recorded from six leg muscles. At both hopping frequencies, the power-trained athletes demonstrated significantly higher leg stiffness than the distance runners. Hip, knee, and ankle joints were analyzed for stiffness and touchdown angles. Ankle stiffness was significantly greater in the power-trained athletes than the distance runners at 3.0Hz as was knee stiffness at 1.5Hz. There was no significant difference in touchdown angle between the DR and PT groups at either hopping frequencies. When significant difference in EMG activity existed between two groups, it was always greater in the distance runners than the power-trained athletes. These results suggest that (1) the difference in leg stiffness between endurance-trained and power-trained athletes is best attributed to increased joint stiffness, and (2) the difference in joint stiffness between the two groups may be attributed to a lack of similarity in the intrinsic stiffness of the muscle-tendon complex rather than in altered neural activity.     

Using force sensing insoles to predict kinetic knee symmetry during a stop jump

Knee kinetic asymmetries are present during jump-landings in athletes returning to sport following anterior cruciate ligament (ACL) reconstruction, and are associated with an increased risk for sustaining a second ACL injury. The loadsol® is a wireless load sensing insole that can be used in non-laboratory settings. The purpose of this study was to determine if the loadsol® could be used to predict knee extension moment and power symmetry during a bilateral stop jump task in healthy recreational athletes. Forty-two uninjured recreational athletes completed seven bilateral stop jumps. During each landing, the loadsol® (100 Hz) measured plantar load while 3D ground reaction forces (1920 Hz) and lower extremity kinematics (240 Hz) were collected simultaneously. Peak impact force, loading rate, and impulse were quantified using the loadsol® and peak knee extension moment, average knee extension moment, and total knee work was quantified using the laboratory instrumentation. Limb symmetry indices were quantified for each outcome measure. Multivariate backwards regressions were used to determine if loadsol® symmetry could predict knee kinetic symmetry. Intraclass correlation coefficients (ICCs) and Bland-Altman plots were used to determine the agreement and error between predicted and actual knee kinetic symmetry. Loadsol® impulse and peak impact force symmetry significantly predicted kinetic knee symmetry and explained 42–61% of its variance. There was good agreement (ICCs = 0.742–0.862) between predicted and actual knee kinetic symmetry, and the error in the predicted outcomes range from ±18 to ±43. These results support using the loadsol® to screen for kinetic symmetries during landing in athletes following ACL reconstruction.     

Natural gaits of the non-pathological flat foot and high-arched foot

There has been a controversy as to whether or not the non-pathological flat foot and high-arched foot have an effect on human walking activities. The 3D foot scanning system was employed to obtain static footprints from subjects adopting a half-weight-bearing stance. Based upon their footprints, the subjects were divided into two groups: the flat-footed and the high-arched. The plantar pressure measurement system was used to measure and record the subjects' successive natural gaits. Two indices were proposed: distribution of vertical ground reaction force (VGRF) of plantar and the rate of change of footprint areas. Using these two indices to compare the natural gaits of the two subject groups, we found that (1) in stance phase, there is a significant difference (p<0.01) in the distributions of VGRF of plantar; (2) in a stride cycle, there is also a significant difference (p<0.01) in the rate of change of footprint area. Our analysis suggests that when walking, the VGRF of the plantar brings greater muscle tension to the flat-footed while a smaller rate of change of footprint area brings greater stability to the high-arched.     

Vertical stiffness during one-legged hopping with and without using a running-specific prosthesis

Although athletes with unilateral below-the-knee amputations (BKAs) generally use their affected leg, including their prosthesis, as their take-off leg for the long jump, little is known about the spring-like leg behavior and stiffness regulation of the affected leg. The purpose of this study was to investigate vertical stiffness during one-legged hopping in an elite-level long jump athlete with a unilateral BKA. We used the spring-mass model to calculate vertical stiffness, which equals the ratio of maximum vertical ground reaction force to maximum center of mass displacement, while the athlete with a BKA hopped on one leg at a range of frequencies. Then, we compared the vertical stiffness of this athlete to seven non-amputee elite-level long-jumpers. We found that from 1.8 to 3.4 Hz, the vertical stiffness of the unaffected leg for an athlete with a BKA increases with faster hopping frequencies, but the vertical stiffness of the affected leg remains nearly constant across frequencies. The athlete with a BKA attained the desired hopping frequencies at 2.2 and 2.6 Hz, but was unable to match the lowest (1.8 Hz) and two highest frequencies (3.0 and 3.4 Hz) using his affected leg. We also found that at 2.5 Hz, unaffected leg vertical stiffness was 15% greater than affected leg vertical stiffness, and the vertical stiffness of non-amputee long-jumpers was 32% greater than the affected leg vertical stiffness of an athlete with a BKA. The results of the present study suggest that the vertical stiffness regulation strategy of an athlete with a unilateral BKA is not the same in the unaffected versus affected legs, and compared to non-amputees.     

Effects of Kinesio taping on scapular kinematics of overhead athletes following muscle fatigue

Scapular kinematics alterations have been found following muscle fatigue. Considering the importance of the lower trapezius in coordinated scapular movement, this study aimed to investigate the effects of elastic taping (Kinesio taping, KT) for muscle facilitation on scapular kinematics of healthy overhead athletes following muscle fatigue. Twenty-eight athletes were evaluated in a crossover, single-blind, randomized design, in three sessions: control (no taping), KT (KT with tension) and sham (KT without tension). Scapular tridimensional kinematics and EMG of clavicular and acromial portions of upper trapezius, lower trapezius and serratus anterior were evaluated during arm elevation and lowering, before and after a fatigue protocol involving repetitive throwing. Median power frequency decline of serratus anterior was significantly lower in KT session compared to sham, possibly indicating lower muscle fatigue. However, the effects of muscle fatigue on scapular kinematics were not altered by taping conditions. Although significant changes were found in scapular kinematics following muscle fatigue, they were small and not considered relevant. It was concluded that healthy overhead athletes seem to present an adaptive mechanism that avoids the disruption of scapular movement pattern following muscle fatigue. Therefore, these athletes do not benefit from the use of KT to assist scapular movement under the conditions tested.     

The Kinematics and Surface Electromyography Characteristics of Round Kick of Martial Arts Athletes

In order to improve the level of athletes, modern scientific and technological means can be used to understand the characteristics and rules of movement. This study mainly analyzed the whip leg technique of Sanda athletes. Taking ten athletes as an example, the kinematics and surface electromyography (sEMG) data of them were measured, calculated and sorted out when they were doing the action of round kick. The results showed that the movement completion time of the first-level athletes was shorter, 0.34 ± 0.33 s. In the stage of turning hip and hitting, the angle of hip joint increased significantly. In the stage of turning hip, there was a significant difference in the angle of hip joint between different levels of athletes (p < 0.05), and there was no significant difference in other kinematics characteristics. In the aspect of sEMG, the duration of muscle discharge of the first-level athletes was shorter, but there was no significant difference in integrated electromyogram (IEMG) and root mean square (RMS). The experimental results reveal the importance of hip joint in the course of round kick and provide some theoretical bases for improving the level of athletes and carrying out targeted training.     

The acute effect of different frequencies of whole-body vibration on countermovement jump performance

Whole-body vibration (WBV) has been shown to elicit acute and chronic improvements in neuromuscular function; however, there is little conclusive evidence regarding an optimum protocol for acute WBV. The aim of this study was to compare the effects of acute exposure to different frequencies of WBV on countermovement jump (CMJ) height. Twelve recreationally trained men (age, 31 ± 8 years; height, 177 ± 12 cm; weight, 83.0 ± 6.9 kg) completed maximal CMJs pre- and post-WBV in a half-squat position for 30 seconds. In a blinded design with randomized testing order, participants were exposed on different days to frequencies of 0, 30, 35, and 40 Hz. Significant main effects were found for time (pre-to-post WBV, p < 0.01) and frequency * time interaction (p < 0.01), with post hoc analysis highlighting that there was a significant mean improvement of 6% in CMJ as a result of WBV at 40 Hz but no significant change at other frequencies. This study demonstrates that for recreationally trained men, an acute 30-second bout of vertical WBV at 40 Hz and 8-mm peak-to-peak displacement significantly enhances explosive jumping performance in comparison to other frequencies. Acute vertical WBV for 30 seconds at 40 Hz may be incorporated into strength and conditioning training to enhance explosive power; however, the exact mechanisms for improvements remain to be elucidated and further well-controlled investigations on chronic WBV training and using well-trained athletes are recommended.     

Influence of training background on jumping height

The aim of this study was to compare the pattern of force production and center of mass kinematics in maximal vertical jump performance between power athletes, recreational bodybuilders, and physically active subjects. Twenty-seven healthy male subjects (age: 24.5 +/- 4.3 years, height: 178.7 +/- 15.2 cm, and weight: 81.9 +/- 12.7 kg) with distinct training backgrounds were divided into 3 groups: power track athletes (PT, n = 10) with international experience, recreational bodybuilders (BB, n = 7) with at least 2 years of training experience, and physically active subjects (PA, n = 10). Subjects performed a 1 repetition maximum (1RM) leg press test and 5 countermovement jumps with no instructions regarding jumping technique. The power-trained group jumped significantly higher (p < 0.05) than the BB and PA groups (0.40 +/- 0.05, 0.31 +/- 0.04, and 0.30 +/- 0.05, respectively). The difference in jumping height was not produced by higher rates of force development (RFD) and shorter center of mass (CM) displacement. Instead, the PT group had greater CM excursion (p < 0.05) than the other groups. The PT and BB groups had a high correlation between jumping height and 1RM test (r = 0.93 and r = 0.89, p < 0.05, respectively). In conclusion, maximum strength seems to be important for jumping height, but RFD does not seem relevant to achieve maximum jumping heights. High RFD jumps should be performed during training only when sport skills have a time constraint for force application.     

脊髓中P物质参与电针镇痛的研究

本研究发现,低频（２Ｈｚ）电针刺激时大鼠脊髓中Ｐ物质免疫活性（ＳＰ－ｉｒ）含量减少,中频（１５Ｈｚ）、高频（１００Ｈｚ）和变频（２／１５Ｈｚ）刺激时ＳＰ－ｉｒ含量增多。脊髓蛛网膜下腔（ｉ．ｔ．）注射非肽类ＳＰ（ＮＫＩ）受体拮抗剂ＣＰ９６３４５和ＲＰ６７５８０均能阻断中频、高频和变频的电针镇痛。ｉ．ｔ．注射阿片拮抗剂纳洛酮阻断低频和中频刺激时ＳＰ－ｉｒ含量的变化。结果提示,脊髓ＳＰ－ｉｒ在低频时释放     

Analysis of Jumping-Landing Manoeuvers after Different Speed Performances in Soccer Players

PurposeRunning at high speed and sudden change in direction or activity stresses the knee. Surprisingly, not many studies have investigated the effects of sprinting on knee’s kinetics and kinematics of soccer players. Hence, this study is aimed to investigate indices of injury risk factors of jumping-landing maneuvers performed immediately after sprinting in male soccer players.MethodsTwenty-three collegiate male soccer players (22.1±1.7 years) were tested in four conditions; vertical jump (VJ), vertical jump immediately after slow running (VJSR), vertical jump immediately after sprinting (VJFR) and double horizontal jump immediately after sprinting (HJFR). The kinematics and kinetics data were measured using Vicon motion analyzer (100Hz) and two Kistler force platforms (1000Hz), respectively.ResultsFor knee flexion joint angle, (p = 0.014, η = 0.15) and knee valgus moment (p = 0.001, η = 0.71) differences between condition in the landing phase were found. For knee valgus joint angle, a main effect between legs in the jumping phase was found (p = 0.006, η = 0.31), which suggests bilateral deficit existed between the right and left lower limbs.ConclusionIn brief, the important findings were greater knee valgus moment and less knee flexion joint angle proceeding sprint (HJFR & VJFR) rather than no sprint condition (VJ) present an increased risk for knee injuries. These results seem to suggest that running and sudden subsequent jumping-landing activity experienced during playing soccer may negatively change the knee valgus moment. Thus, sprinting preceding a jump task may increase knee risk factors such as moment and knee flexion joint angle.     

Muscle strength in male athletes aged 70-81 years and a population sample.

Muscle strength characteristics of different muscle groups were studied in active male strength-trained (ST, n = 14), speed-trained (SP, n = 16), and endurance-trained (EN, n = 67) athletes aged between 70 and 81 years. A population sample of similar age (n = 42) served as a control group. The isometric forces for hand grip, arm flexion, knee extension, trunk extension, and trunk flexion were higher for the athletes than the controls and higher for the ST than EN group. The SP athletes showed higher values in knee extension and trunk flexion than the EN group. When the isometric muscle forces were related to lean body mass, significant differences still existed between the athletes and controls. However, the differences between the ST and EN groups disappeared. The elevation of the body's centre of gravity in the vertical jump was also higher for the athletes than the controls. The SP group performed better in the vertical jump than either the ST or EN group. The results showed that the athletes who trained not only for strength and speed but also for endurance had superior muscle function compared to the average male population of the same age. Although the strength and speed athletes generally showed the highest muscle strength in absolute terms, the endurance athletes also preserved excellent strength characteristics related to body mass.     

Linking behaviour and performance: intermittent locomotion in a climbing fish

How locomotory performance is influenced by prior experience and behaviour is of adaptive significance. The relationship between kinematics, behaviour and performance was investigated by assessing a previously undescribed mode of climbing locomotion performed by adult Pacific lamprey. The lampreys were challenged with a 1.4 m vertical weir under an experimental setting. The majority of ascents used intermittent bouts of climbing (on an average approximately one-fifth of total ascent time) via powerful cycles of axial undulation at 0.35–1.25 Hz, interspersed with periods of stationary attachment with the oral disk. However, two of the most rapid ascents (57 and 85 s) occurred during one continuous bout at a low cycle frequency ( c . 0.38 and 0.50 Hz). Probability of success and ascent time was positively related to experience climbing the weir. The ratio of time spent actively climbing to time spent resting decreased with distance travelled, indicating fatigue. Ascents with long periods of activity had correspondingly high durations of recovery. Moreover, time to ascend was positively related to the proportion of time spent stationary in ascents that took <300 s. The findings suggest that modification of intermittent locomotion allows Pacific lamprey to compensate for variation in climbing performance and can extend distance travelled before exhaustion.     

Effect of Olympic and traditional resistance training on vertical jump improvement in high school boys

The purpose of this study was to compare the effects of a ballistic resistance training program of Olympic lifts with those of a traditional resistance training program of power lifts on vertical jump improvement in male high school athletes. Twenty-seven male student athletes were recruited from a high school football program at a small, rural school in the Southeast. The subjects were divided into an Olympic training group (OT, n = 11), a power training group (PT, n = 10), and a control group (n = 6). Analysis of variance was used to determine whether a significant mean difference existed among groups on vertical jump improvement after 8 weeks of group-specific training. Effect size of vertical jump improvement between groups, and correlations between strength and vertical jump performance, were also examined. There was no significant mean difference (p >or= 0.05) among OT, PT, and control groups, but large effect sizes between OT and control (d = 1.06) and PT and control (d = 0.94) demonstrate that both OT and PT are effective in improving vertical jump performance in male high school athletes. Moderate to high correlations were noted between squat score and vertical jump after adjusting for body weight (r = 0.42) and between power clean and vertical jump after adjusting for body weight (r = 0.75). Findings from the current study indicate that Olympic lifts as well as power lifts provide improvement in vertical jump performance and that Olympic lifts may provide a modest advantage over power lifts for vertical jump improvement in high school athletes.     

Three-dimensional kinematic analysis of the snatch technique for lifting different barbell weights

The purpose of this study was to investigate the effects of increased barbell loads on barbell and body kinematics of the snatch lifts at 60, 80, and 100% of 1 repetition maximum and to evaluate the biomechanics of snatch technique. The study was performed on 7 elite male weightlifters of the Turkish national team. Four cameras operating at 50 fields per second were used to record the lifts. For 3D kinematic analysis of center of gravity (CG) and barbell movement, the points on the body and the barbell were digitized by using an Ariel Performance Analysis System. There were significant differences between the vertical work values (p < 0.05). The power values of the 3 snatch lifts were also found to be significantly different (p < 0.05). Another significant difference (p < 0.05) was observed between maximum vertical displacement of the barbell, maximum vertical velocity of the barbell, maximum vertical displacement of CG, the vertical velocity of CG during the turnover under the barbell. The results demonstrated that vertical and horizontal kinematics of the barbell and body decreased at the pull phase of the snatch technique as the barbell load increased. The power output during the second pull increased although the work done did not change, whereas work and power output increased during the first pull phase depending on the increase in the barbell weight. The finding of this study suggested that weightlifters had to perform the turnover under the barbell and the catch phase faster, because when the barbell weight was increased at snatch lift, vertical kinematics of the barbell decreased.     

The best warm-up for the vertical jump in college-age athletic men

The purpose of this study was to determine the effectiveness of specific and nonspecific warm-ups on the vertical jump test performed by athletic men. Twenty-nine men (18-23 years) in athletics (speed positions in football) performed vertical jump tests on 4 separate days after completing 4 different warm-up protocols. The 4 warm-up protocols were (a) submaximal jump warm-up, (b) weighted jump warm-up, (c) stretching warm-up, and (d) no warm-up. The weighted jump warm-up protocol required 5 countermovement jumps onto a box, with the athletes holding dumbbells equaling 10% of their body weight. The submaximal jump warm-up protocol required the athletes to perform 5 countermovement jumps at 75% intensity of their past maximum vertical jump score. The stretching warm-up protocol required the athletes to perform 14 different stretches, each held for 20 seconds. The no warm-up protocol required the athletes to perform no activity prior to being tested. Three vertical jumps were measured following each warm-up; the score for analysis was the best jump. The data were analyzed with a repeated measures analysis of variance and Bonferroni post hoc tests. The Bonferroni post hoc tests showed a significant difference (p < 0.001) between the weighted jump warm-up and all other warm-ups. The effect size was 0.380 and the power was 1.00 for the statistical analyses. We concluded that utilizing a weighted resistance warm-up would produce the greatest benefit when performing the vertical jump test.     

ACUTE EFFECTS OF A RESISTED DYNAMIC WARM-UP PROTOCOL ON JUMPING PERFORMANCE

This study aimed to investigate the kinematic and kinetic changes when resistance is applied in horizontal and vertical directions, produced by using different percentages of body weight, caused by jumping movements during a dynamic warm-up. The group of subjects consisted of 35 voluntary male athletes (19 basketball and 16 volleyball players; age: 23.4 ± 1.4 years, training experience: 9.6 ± 2.7 years; height: 177.2 ± 5.7 cm, body weight: 69.9 ± 6.9 kg) studying Physical Education, who had a jump training background and who were training for 2 hours, on 4 days in a week. A dynamic warm-up protocol containing seven specific resistance movements with specific resistance corresponding to different percentages of body weight (2%, 4%, 6%, 8%, 10%) was applied randomly on non consecutive days. Effects of different warm-up protocols were assessed by pre-/post- exercise changes in jump height in the countermovement jump (CMJ) and the squat jump (SJ) measured using a force platform and changes in hip and knee joint angles at the end of the eccentric phase measured using a video camera. A significant increase in jump height was observed in the dynamic resistance warm-up conducted with different percentages of body weight (p < 0.05). On the other hand, no significant difference in different percentages of body weight states was observed (p > 0.05). In jump movements before and after the warm-up, while no significant difference between the vertical ground reaction forces applied by athletes was observed (p > 0.05), in some cases of resistance, a significant reduction was observed in hip and knee joint angles (p < 0.05). The dynamic resistance warm-up method was found to cause changes in the kinematics of jumping movements, as well as an increase in jump height values. As a result, dynamic warm-up exercises could be applicable in cases of resistance corresponding to 6-10% of body weight applied in horizontal and vertical directions in order to increase the jump performance acutely.     

Contributing factors to performance of a medicine ball explosive power test: a comparison between jump and nonjump athletes

The present study examined the factors contributing to performance of a backward overhead medicine ball throw (B-MBT) across 2 types of athletes. Twenty male volleyball players (jump athletes) and 20 wrestlers (nonjump athletes) were evaluated on 4 measures of power, including B-MBT, chest medicine ball throw (C-MBT), countermovement vertical jump (CMJ), and power index (PI). The athletes also completed 3 measures of strength: a 1-repetition-maximum (1RM) bench press (BP), a 1RM leg press (LP), and combined BP + LP strength. Jump athletes demonstrated greater absolute scores for CMJ, C-MBT, and B-MBT (p < 0.05), whereas nonjump athletes demonstrated greater strength scores for BP and for BP + LP (p < 0.05). When performances were examined on a relative basis, jump athletes achieved superior scores for C-MBT (p < 0.05), whereas nonjump athletes had greater scores for BP, LP, and BP + LP (p < 0.05). For both groups, B-MBT had strong correlations with PI (r = 0.817 [jump] and 0.917 [nonjump]), whereas for C-MBT, only nonjump athletes demonstrated a strong correlation (r = 0.842). When expressed in relative terms, B-MBT was strongly correlated with C-MBT (r = 0.762 [jump] and 0.835 [nonjump]) and CMJ (r = 0.899 [jump] and 0.945 [nonjump]). Only nonjump athletes demonstrated strong correlations with strength for absolute LP (r = 0.801) and BP + LP (r = 0.810) strength. The interaction of upper- and lower-body strength and power in the performance of a B-MBT appears complex, with the contributing factors differing for athletes with divergent skill sets and performance demands.