Synthesis and β-sheet propensity of constrained N-amino peptides

The stabilization of β-sheet secondary structure through peptide backbone modification represents an attractive approach to protein mimicry. Here, we present strategies toward stable β-hairpin folds based on peptide strand N-amination. Novel pyrazolidinone and tetrahydropyridazinone dipeptide constraints were introduced via on-resin Mitsunobu cyclization between α-hydrazino acid residues and a serine or homoserine side chain. Acyclic and cyclic N-amino peptide building blocks were then evaluated for their effect on β-hairpin stability in water using a GB1-derived model system. Our results demonstrate the strong β-sheet stabilizing effect of the peptide N-amino substituent, and provide useful insights into the impact of covalent dipeptide constraint on β-sheet folding.     

Binding Modes of Thioflavin-T to the Single-Layer β-Sheet of the Peptide Self-Assembly Mimics

Although the amyloid dye thioflavin-T (ThT) is among the most widely used tools in the study of amyloid fibrils, the mechanism by which ThT binds to fibrils and other β-rich peptide self-assemblies remains elusive. The development of the water-soluble peptide self-assembly mimic (PSAM) system has provided a set of ideal model proteins for experimentally exploring the properties and minimal dye-binding requirements of amyloid fibrils. PSAMs consist of a single-layer β-sheet (SLB) capped by two globular domains, which capture the flat, extended β-sheet features common among fibril-like surfaces. Recently, a PSAM that binds to ThT with amyloid-like affinity (low micromolar K_d) has been designed, and its crystal structure in the absence of bound ThT was determined. This PSAM thus provides a unique opportunity to examine the interactions of ThT with a β-rich structure. Here, we present molecular dynamics simulations of the binding of ThT to this PSAM β-sheet. We show that the primary binding site for ThT is along a shallow groove formed by adjacent Tyr and Leu residues on the β-sheet surface. These simulations provide an atomic-scale rationale for this PSAM's experimentally determined dye-binding properties. Together, our results suggest that an aromatic-hydrophobic groove spanning across four consecutive β-strands represents a minimal ThT binding site on amyloid fibrils. Grooves formed by aromatic-hydrophobic residues on amyloid fibril surfaces may therefore offer a generic mode of recognition for amyloid dyes.     

The function of the secondary DNA-binding site of RecA protein during DNA strand exchange.

RecA protein features two distinct DNA-binding sites. During DNA strand exchange, the primary site binds to single-stranded DNA (ssDNA), forming the helical RecA nucleoprotein filament. The weaker secondary site binds double-stranded DNA (dsDNA) during the homology search process. Here we demonstrate that this site has a second important function. It binds the ssDNA strand that is displaced from homologous duplex DNA during DNA strand exchange, stabilizing the initial heteroduplex DNA product. Although the high affinity of the secondary site for ssDNA is essential for DNA strand exchange, it renders DNA strand exchange sensitive to an excess of ssDNA which competes with dsDNA for binding. We further demonstrate that single-stranded DNA-binding protein can sequester ssDNA, preventing its binding to the secondary site and thereby assisting at two levels: it averts the inhibition caused by an excess of ssDNA and prevents the reversal of DNA strand exchange by removing the displaced strand from the secondary site.     

Analysis of the DNA substrate specificity of the human BACH1 helicase associated with breast cancer

We have investigated the DNA substrate specificity of BACH1 (BRCA1-associated C-terminal helicase). The importance of various DNA structural elements for efficient unwinding by purified recombinant BACH1 helicase was examined. The results indicated that BACH1 preferentially binds and unwinds a forked duplex substrate compared with a duplex flanked by only one single-stranded DNA (ssDNA) tail. In support of its DNA substrate preference, helicase sequestration studies revealed that BACH1 can be preferentially trapped by forked duplex molecules. BACH1 helicase requires a minimal 5 ' ssDNA tail of 15 nucleotides for unwinding of conventional duplex DNA substrates; however, the enzyme is able to catalytically release the third strand of the homologous recombination intermediate D-loop structure irrespective of DNA tail status. In contrast, BACH1 completely fails to unwind a synthetic Holliday junction structure. Moreover, BACH1 requires nucleic acid continuity in the 5 ' ssDNA tail of the forked duplex substrate within six nucleotides of the ssDNA-dsDNA junction to initiate efficiently DNA unwinding. These studies provide the first detailed information on the DNA substrate specificity of BACH1 helicase and provide insight to the types of DNA structures the enzyme is likely to act upon to perform its functions in DNA repair or recombination.     

Genetic recombination in Bacillus subtilis: a division of labor between two single-strand DNA-binding proteins

We have investigated the structural, biochemical and cellular roles of the two single-stranded (ss) DNA-binding proteins from Bacillus subtilis, SsbA and SsbB. During transformation, SsbB localizes at the DNA entry pole where it binds and protects internalized ssDNA. The 2.8-Å resolution structure of SsbB bound to ssDNA reveals a similar overall protein architecture and ssDNA-binding surface to that of Escherichia coli SSB. SsbA, which binds ssDNA with higher affinity than SsbB, co-assembles onto SsbB-coated ssDNA and the two proteins inhibit ssDNA binding by the recombinase RecA. During chromosomal transformation, the RecA mediators RecO and DprA provide RecA access to ssDNA. Interestingly, RecO interaction with ssDNA-bound SsbA helps to dislodge both SsbA and SsbB from the DNA more efficiently than if the DNA is coated only with SsbA. Once RecA is nucleated onto the ssDNA, RecA filament elongation displaces SsbA and SsbB and enables RecA-mediated DNA strand exchange. During plasmid transformation, RecO localizes to the entry pole and catalyzes annealing of SsbA- or SsbA/SsbB-coated complementary ssDNAs to form duplex DNA with ssDNA tails. Our results provide a mechanistic framework for rationalizing the coordinated events modulated by SsbA, SsbB and RecO that are crucial for RecA-dependent chromosomal transformation and RecA-independent plasmid transformation.     

Role of β-Hairpin Formation in Aggregation: The Self-Assembly of the Amyloid-β(25-35) Peptide

The amyloid-β(25-35) peptide plays a key role in the etiology of Alzheimer's disease due to its extreme toxicity even in the absence of aging. Because of its high tendency to aggregate and its low solubility in water, the structure of this peptide is still unknown. In this work, we sought to understand the early stages of aggregation of the amyloid-β(25-35) peptide by conducting simulations of oligomers ranging from monomers to tetramers. Our simulations show that although the monomer preferentially adopts a β-hairpin conformation, larger aggregates have extended structures, and a clear transition from compact β-hairpin conformations to extended β-strand structures occurs between dimers and trimers. Even though β-hairpins are not present in the final architecture of the fibril, our simulations indicate that they play a critical role in fibril growth. Our simulations also show that β-sheet structures are stabilized when a β-hairpin is present at the edge of the sheet. The binding of the hairpin to the sheet leads to a subsequent destabilization of the hairpin, with part of the hairpin backbone dangling in solution. This free section of the peptide can then recruit an extra monomer from solution, leading to further sheet extension. Our simulations indicate that the peptide must possess sufficient conformational flexibility to switch between a hairpin and an extended conformation in order for β-sheet extension to occur, and offer a rationalization for the experimental observation that overstabilizing a hairpin conformation in the monomeric state (for example, through chemical cross-linking) significantly hampers the fibrillization process.     

5′‐Single‐stranded/duplex DNA junctions are loading sites for E. coli UvrD translocase

Escherichia coli UvrD is a 3′–5′ superfamily 1A helicase/translocase involved in a variety of DNA metabolic processes. UvrD can function either as a helicase or only as an single‐stranded DNA (ssDNA) translocase. The switch between these activities is controlled in vitro by the UvrD oligomeric state; a monomer has ssDNA translocase activity, whereas at least a dimer is needed for helicase activity. Although a 3′‐ssDNA partial duplex provides a high‐affinity site for a UvrD monomer, here we show that a monomer also binds with specificity to DNA junctions possessing a 5′‐ssDNA flanking region and can initiate translocation from this site. Thus, a 5′‐ss–duplex DNA junction can serve as a high‐affinity loading site for the monomeric UvrD translocase, whereas a 3′‐ss–duplex DNA junction inhibits both translocase and helicase activity of the UvrD monomer. Furthermore, the 2B subdomain of UvrD is important for this junction specificity. This highlights a separation of helicase and translocase function for UvrD and suggests that a monomeric UvrD translocase can be loaded at a 5′‐ssDNA junction when translocation activity alone is needed.     

Effect of heterochiral inversions on the structure of a β-hairpin peptide

We study computationally a family of β-hairpin peptides with systematically introduced chiral inversions, in explicit water, and we investigate the extent to which the backbone structure is able to fold in the presence of heterochiral perturbations. In contrast to the recently investigated case of a helical peptide, we do not find a monotonic change in secondary structure content as a function of the number of L- to D-inversions. The effects of L- to D-inversions are instead found to be highly position-specific. Additionally, in contrast to the helical peptide, some inversions increase the stability of the folded peptide: in such cases, we compute an increase in β-sheet content in the aqueous solution equilibrium ensemble. However, the tertiary structures of the stable (folded) configurations for peptides for which inversions cause an increase in β-sheet content show differences from one another, as well as from the native fold of the nonchirally perturbed β-hairpin. Our results suggest that although some chiral perturbations can increase folding stability, chirally perturbed proteins may still underperform functionally, given the relationship between structure and function.     

Understanding the folding and stability of a designed WW domain protein with replica exchange molecular dynamics simulations

WW domain proteins are usually regarded as simple models for understanding the folding mechanism of β-sheet. CC45 is an artificial protein that is capable of folding into the same structure as WW domain. In this article, the replica exchange molecular dynamics simulations are performed to investigate the folding mechanism of CC45. The analysis of thermal stability shows that β-hairpin 1 is more stable than β-hairpin 2 during the unfolding process. Free energy analysis shows that the unfolding of this protein substantially proceeds through solvating the smaller β-hairpin 2, followed by the unfolding of β-hairpin 1. We further propose the unfolding process of CC45 and the folding mechanism of two β-hairpins. These results are similar to the previous folding studies of formin binding protein 28 (FBP28). Compared with FBP28, it is found that CC45 has more aromatic residues in N-terminal loop, and these residues contact with C-terminal loop to form the outer hydrophobic core, which increases the stability of CC45. Knowledge about the stability and folding behaviour of CC45 may help in understanding the folding mechanisms of the β-sheet and in designing new WW domains.     

The meiosis-specific recombinase hDmc1 forms ring structures and interacts with hRad51

Eukaryotic cells encode two homologs of Escherichia coli RecA protein, Rad51 and Dmc1, which are required for meiotic recombination. Rad51, like E.coli RecA, forms helical nucleoprotein filaments that promote joint molecule and heteroduplex DNA formation. Electron microscopy reveals that the human meiosis-specific recombinase Dmc1 forms ring structures that bind single-stranded (ss) and double-stranded (ds) DNA. The protein binds preferentially to ssDNA tails and gaps in duplex DNA. hDmc1-ssDNA complexes exhibit an irregular, often compacted structure, and promote strand-transfer reactions with homologous duplex DNA. hDmc1 binds duplex DNA with reduced affinity to form nucleoprotein complexes. In contrast to helical RecA/Rad51 filaments, however, Dmc1 filaments are composed of a linear array of stacked protein rings. Consistent with the requirement for two recombinases in meiotic recombination, hDmc1 interacts directly with hRad51.     

A pentapeptide model for an early folding step in the refolding of staphylococcal nuclease: The role of its turn propensity

Recently the folding of a staphylococcal nuclease (P117G) variant was examined with the hydrogen-deuterium (H-D) exchange technique. Many of the residues that showed significant protection are located in protection are located in β-sheet regions. About half the residues protected belong to an antiparallel β-hairpin structure (residues 21–35) in the native structure. The β-hairpin structure is formed by strands 2 and 3 of sheet 2 connected by the sequence²⁷ Y KGQP³¹ in a type I′ reverse turn conformation with a 4 → 1 hydrogen bonding between Q30 NH and Y27 C=O. We have targeted the conformational characterization of the peptide model Ac-YKGQP-NH₂ with ¹II two-dimensional nmr techniques in aqueous solution with a view to assessing its propensity to sample turn conformational forms and thus initiate the formation of β-hairpin structure. Based upon the observed dαn (i, i + 1), dαn (i, i + 3), and dnn (i, i + 1) nuclear Overhauser effect connectivities, temperature coefficients for amide protons and conformational analysis with quantum mechanical perturbative configuration interaction over localized orbitals method, we conclude that the model peptide samples turn conformational forms with reduced conformational entropy. We suggest that the turn can nucleate the formation of the β-hairpin structure in the refolding of nuclease. Observation of turn propensity for this sequence is consistent with the folding mechanism of the Greek key motif (present in Staphylococcal nuclease) proposed in the literature. © 1997 John Wiley & Sons, Inc.     

Bacillus subtilis DprA Recruits RecA onto Single-stranded DNA and Mediates Annealing of Complementary Strands Coated by SsbB and SsbA

Naturally transformable bacteria recombine internalized ssDNA with a homologous resident duplex (chromosomal transformation) or complementary internalized ssDNAs (plasmid or viral transformation). Bacillus subtilis competence-induced DprA, RecA, SsbB, and SsbA proteins are involved in the early processing of the internalized ssDNA, with DprA physically interacting with RecA. SsbB and SsbA bind and melt secondary structures in ssDNA but limit RecA loading onto ssDNA. DprA binds to ssDNA and facilitates partial dislodging of both single-stranded binding (SSB) proteins from ssDNA. In the absence of homologous duplex DNA, DprA does not significantly increase RecA nucleation onto protein-free ssDNA. DprA facilitates RecA nucleation and filament extension onto SsbB-coated or SsbB plus SsbA-coated ssDNA. DprA facilitates RecA-mediated DNA strand exchange in the presence of both SSB proteins. DprA, which plays a crucial role in plasmid transformation, anneals complementary strands preferentially coated by SsbB to form duplex circular plasmid molecules. Our results provide a mechanistic framework for conceptualizing the coordinated events modulated by SsbB in concert with SsbA and DprA that are crucial for RecA-dependent chromosomal transformation and RecA-independent plasmid transformation.     

Lock and key binding of the HOX YPWM peptide to the PBX homeodomain

HOX homeodomain proteins bind short core DNA sequences to control very specific developmental processes. DNA binding affinity and sequence selectivity are increased by the formation of cooperative complexes with the PBX homeodomain protein. A conserved YPWM motif in the HOX protein is necessary for cooperative binding with PBX. We have determined the structure of a PBX homeodomain bound to a 14-mer DNA duplex. A relaxation-optimized procedure was developed to measure DNA residual dipolar couplings at natural abundance in the 20-kDa binary complex. When the PBX homeodomain binds to DNA, a fourth alpha-helix is formed in the homeodomain. This helix rigidifies the DNA recognition helix of PBX and forms a hydrophobic binding site for the HOX YPWM peptide. The HOX peptide itself shows some structure in solution and suggests that the interaction between PBX and HOX is an example of "lock and key" binding. The NMR structure explains the requirement of DNA for the PBX-HOX interaction and the increased affinity of DNA binding.     

Recognition of duplex DNA by RNA polynucleotides.

We are interested in creating artificial gene repressors based on duplex DNA recognition by nucleic acids. Homopyrimidine RNA oligonucleotides bind to duplex DNA at homopurine/homopyrimidine sequences under slightly acidic conditions. Recognition is sequence-specific, involving rU.dA.dT and rC+.dG.dC base triplets. Affinities were determined for folded polymeric RNAs (ca. 100-200 nt) containing 0, 1 or 3 copies of a 21 nt RNA sequence that binds duplex DNA by triple helix formation. When this recognition sequence was inserted into the larger folded RNAs, micromolar concentrations of the resulting RNA ligands bound a duplex DNA target at pH 5. However, these binding affinities were at least 20-fold lower than the affinity of an RNA oligonucleotide containing only the recognition sequence. Enzymatic probing of folded RNAs suggests that reduced affinity arises from unfavorable electrostatic, structural and topological considerations. The affinity of a polymeric RNA with three copies of the recognition sequence was greater than that of a polymeric RNA with a single copy of the sequence. This affinity difference ranged from 2.6- to 13-fold, depending on pH. Binding of duplex DNA by polymeric RNA might be improved by optimizing the RNA structure to efficiently present the recognition sequence.     

Coupling dTTP hydrolysis with DNA unwinding by the DNA helicase of bacteriophage T7

The DNA helicase encoded by gene 4 of bacteriophage T7 assembles on single-stranded DNA as a hexamer of six identical subunits with the DNA passing through the center of the toroid. The helicase couples the hydrolysis of dTTP to unidirectional translocation on single-stranded DNA and the unwinding of duplex DNA. Phe(523), positioned in a β-hairpin loop at the subunit interface, plays a key role in coupling the hydrolysis of dTTP to DNA unwinding. Replacement of Phe(523) with alanine or valine abolishes the ability of the helicase to unwind DNA or allow T7 polymerase to mediate strand-displacement synthesis on duplex DNA. In vivo complementation studies reveal a requirement for a hydrophobic residue with long side chains at this position. In a crystal structure of T7 helicase, when a nucleotide is bound at a subunit interface, Phe(523) is buried within the interface. However, in the unbound state, it is more exposed on the outer surface of the helicase. This structural difference suggests that the β-hairpin bearing the Phe(523) may undergo a conformational change during nucleotide hydrolysis. We postulate that upon hydrolysis of dTTP, Phe(523) moves from within the subunit interface to a more exposed position where it contacts the displaced complementary strand and facilitates unwinding.     

Effects of arginine density on the membrane-bound structure of a cationic antimicrobial peptide from solid-state NMR

Solid-state NMR spectroscopy is used to determine the membrane-bound topological structure of a cationic β-hairpin antimicrobial peptide in which the number of Arg residues has been halved. The parent peptide, PG-1, was previously found to form transmembrane β-barrels in anionic membranes where the Arg residues complex with the lipid phosphate groups to cause toroidal pore defects in the membrane. In comparison, the charge-attenuated and less active mutant studied here forms β-sheets that lie on the surface of the zwitterionic membrane and only partially insert into the anionic membrane. The mutant also exhibits much looser contact with the lipid headgroups. These results indicate that transmembrane insertion and tight Arg-phosphate association are two important elements for strong antimicrobial activities of this class of peptides. Comparison with other β-hairpin antimicrobial peptides studied so far further suggests a relative potency scale for the various mechanisms of action for the β-sheet family of antimicrobial peptides. The transmembrane insertion-toroidal pore mechanism is the most potent in disrupting the lipid bilayer, followed by the large-amplitude in-plane motional mechanism. The carpet model, where peptides aggregate on the membrane surface to cause lateral expansion and eventual micellization of the membrane, is a weaker mechanism of action.     

RecO-mediated DNA homology search and annealing is facilitated by SsbA

Bacillus subtilis RecO plays a central role in recombinational repair and genetic recombination by (i) stimulating RecA filamentation onto SsbA-coated single-stranded (ss) DNA, (ii) modulating the extent of RecA-mediated DNA strand exchange and (iii) promoting annealing of complementary DNA strands. Here, we report that RecO-mediated strand annealing is facilitated by cognate SsbA, but not by a heterologous one. Analysis of non-productive intermediates reveals that RecO interacts with SsbA-coated ssDNA, resulting in transient ternary complexes. The self-interaction of ternary complexes via RecO led to the formation of large nucleoprotein complexes. In the presence of homology, SsbA, at the nucleoprotein, removes DNA secondary structures, inhibits spontaneous strand annealing and facilitates RecO loading onto SsbA–ssDNA complex. RecO relieves SsbA inhibition of strand annealing and facilitates transient and random interactions between homologous naked ssDNA molecules. Finally, both proteins lose affinity for duplex DNA. Our results provide a mechanistic framework for rationalizing protein release and dsDNA zippering as coordinated events that are crucial for RecA-independent plasmid transformation.     

Fanconi anemia complementation group A (FANCA) protein has intrinsic affinity for nucleic acids with preference for single-stranded forms

The Fanconi anemia complementation group A (FANCA) gene is one of 15 disease-causing genes and has been found to be mutated in ～60% of Fanconi anemia patients. Using purified protein, we report that human FANCA has intrinsic affinity for nucleic acids. FANCA binds to both single-stranded (ssDNA) and double-stranded (dsDNA) DNAs; however, its affinity for ssDNA is significantly higher than for dsDNA in an electrophoretic mobility shift assay. FANCA also binds to RNA with an intriguingly higher affinity than its DNA counterpart. FANCA requires a certain length of nucleic acids for optimal binding. Using DNA and RNA ladders, we determined that the minimum number of nucleotides required for FANCA recognition is ～30 for both DNA and RNA. By testing the affinity between FANCA and a variety of DNA structures, we found that a 5'-flap or 5'-tail on DNA facilitates its interaction with FANCA. A patient-derived FANCA truncation mutant (Q772X) has diminished affinity for both DNA and RNA. In contrast, the complementing C-terminal fragment of Q772X, C772-1455, retains the differentiated nucleic acid-binding activity (RNA > ssDNA > dsDNA), indicating that the nucleic acid-binding domain of FANCA is located primarily at its C terminus, where most disease-causing mutations are found.