Direct sequencing of baculovirus genomic DNA: sequence determination of the engineered respiratory syncytial virus chimeric FG gene.

Primer-directed enzymatic sequencing has proven to be an efficient and effective method for sequencing various size double-stranded DNA templates. We previously developed a primer-directed sequencing procedure for using double-stranded cosmid (50 kb) DNAs as template. We are interested in using this method to directly sequence larger DNA templates. Towards this goal we applied this method to directly sequence an engineered gene that had been transferred and integrated into the 130-kb baculovirus genome. Both crudely prepared and CsCl gradient-banded baculovirus DNAs were tested and reasonable sequencing ladders were obtained for both types of DNA templates. As little as 3 micrograms of gradient-banded baculovirus DNA were found to be sufficient to obtain film exposure times similar to those observed for cosmid size templates, 24 to 48 h. Effectiveness of the described method was demonstrated by obtaining the complete sequence of the engineered respiratory syncytial virus chimeric FG gene (2.5 kb in length) directly from the recombinant baculovirus "Baculo-FG" genome. Thus, our results demonstrate first, that double-stranded DNA templates as large as 130 kb can be sequenced directly and second, that the nucleotide sequence of engineered genes integrated within the baculovirus genome can be determined without the use of any intermediate steps of procedures.     

A Novel Method for Generating Nested Deletions Using the in Vitro Bacteriophage T3 DNA Packaging System

To sequence a DNA segment inserted into a cosmid vector underthe directed sequencing strategy, we established a simple andrapid method for generating nested deletions which uses thein vitro packaging system of bacteriophage T3 DNA. The principleis based on the previous finding that this system can translocateany linear double-stranded DNA up to 40 kb into the phage capsidin a time-dependent manner and the encapsulated DNA becomesDNase-resistant. For this purpose, we constructed a cosmid vectorthat carries two different antibiotic selection markers at bothsides of the multiple cloning site, and after insertion of aDNA segment, the clone was linearized by -terminase at the cossite. After the packaging reaction in vitro followed by DNasetreatment, the encapsulated DNA was introduced into Escherichiacoli cells to give clones with unidirectional deletions by differentialantibiotic selection. Restriction and sequence analyses of deletionclones demonstrated that an ordered set of clones with nesteddeletions, ranging from less than 1 kb to 25 kb, was createdfrom either the end of the DNA segment. Thus, nested deletionclones that cover the entire region of a 40-kb cosmid insertcan be obtained by a single packaging reaction, and its restrictionmap can be simultaneously obtained.     

Bst DNA polymerase permits rapid sequence analysis from nanogram amounts of template

A simple, rapid method is presented for the enzymatic sequence analysis of nanogram amounts of single-stranded or double-stranded DNA. This approach employs the thermostable DNA polymerase from Bacillus sterothermophilus and exploits its ability to efficiently extend all of the template-primer complex, even at low substrate concentrations. The procedure requires few pipetting steps, no preannealing step and very short reaction time. This method can significantly reduce the cost associated with DNA polymerase and the amount of template and time required to perform the enzymatic sequencing reactions. As little as a 10-ng aliquot of such sequencing reactions can be analyzed on a fluorescence-based capillary gel electrophoresis instrument recently developed in our laboratory. This highly sensitive detection, in conjunction with the ability to efficiently sequence nanogram amounts of template, strongly suggests the feasibility of direct DNA sequencing of single bacteriophage M13 plaques without prior amplification.     

New rapid methods for DNA sequencing based in exonuclease III digestion followed by repair synthesis.

We describe improve enzymatic methods for sequencing method for sequencing DNA. They are based on partial digestion of duplex DNA with exonuclease III to produce DNA molecules with 3' ends shortened to varying lengths, followed by repair synthesis to extend and label the 3' ends. After asymmetrical cleavage of the DNA with a restriction enzyme, the labeled products are separated by gel electrophoresis and the sequence read from the autoradiogram. The entire procedures, beginning with unrestricted DNA and followed through gel electrophoresis, takes only one day for sequencing both strands of the DNA molecule. These methods are especially suitable for sequencing DNA cloned in plasmid vectors, and they greatly extend the usefulness of the dideoxynucleotide chain termination method of Sanger et al. (Proc. Natl. Acad. Sci. USA 74, 5463, 1977). Using these methods we have determined the sequence of a 410 base pair fragment which includes the yeast SUP3 tyrosine tRNA gene.     

Exoquence DNA sequencing.

We have developed a strategy for DNA sequencing based on exonuclease III digestion followed by double strand specific endonuclease digestion and direct dideoxynucleotide sequencing reaction. This strategy eliminates the need for subcloning, oligonucleotide primers, and prior knowledge of the DNA to be sequenced. All template and primer duplexes needed for sequencing a complete insert can be prepared in one day from uncharacterized starting DNA. Sequence information can be obtained from different regions of the DNA simultaneously. The method uses double-stranded DNA to generate single-stranded template and primer, and thus produces high quality sequence results. Commercially available dideoxy-sequencing kits are well suited for this method. The strategy should be applicable for both automatic and routine laboratory DNA sequencing.     

Nucleotide sequence analysis of 95 kb near the 3' end of the murine T-cell receptor alpha/delta chain locus: strategy and methodology.

The nucleotide sequence of a region at the 3' terminus of the murine T-cell receptor alpha/delta chain locus is presented. This region, which encodes the constant region genes for alpha and delta chain polypeptides and all 50 joining gene segments for the alpha chain polypeptide, spans 94,647 bp and includes more than 50 noncoding sequence elements important for T-cell receptor gene rearrangement and expression. DNA sequencing of this region included complete analysis of two cosmid clones and five additional restriction fragments using a random subcloning approach with various manual and automated sequencing strategies. The automated sequencing strategies hold considerable promise for future large-scale DNA sequencing efforts.     

Parallel tagged sequencing on the 454 platform

Parallel tagged sequencing (PTS) is a molecular barcoding method designed to adapt the recently developed high-throughput 454 parallel sequencing technology for use with multiple samples. Unlike other barcoding methods, PTS can be applied to any type of double-stranded DNA (dsDNA) sample, including shotgun DNA libraries and pools of PCR products, and requires no amplification or gel purification steps. The method relies on attaching sample-specific barcoding adapters, which include sequence tags and a restriction site, to blunt-end repaired DNA samples by ligation and strand-displacement. After pooling multiple barcoded samples, molecules without sequence tags are effectively excluded from sequencing by dephosphorylation and restriction digestion, and using the tag sequences, the source of each DNA sequence can be traced. This protocol allows for sequencing 300 or more complete mitochondrial genomes on a single 454 GS FLX run, or twenty-five 6-kb plasmid sequences on only one 16th plate region. Most of the reactions can be performed in a multichannel setup on 96-well reaction plates, allowing for processing up to several hundreds of samples in a few days.     

圈卷产色链霉菌尼可霉素生物合成基因-sanK的克隆及功能研究

利用染色体步移策略,以尼可霉素生物合成相关的基因片段为探针,从圈卷产色链霉菌中克隆到了一个大约１０ｋｂ的ＤＮＡ片段。对其中１．８ｋｂ的ＰｖｕⅡ－ＳａｃⅡ片段进行了序列分析,结果表明：此片段中含有一个具有１１７０个核苷酸的完整开放阅读框,起始密码子为４４７位的ＡＴＧ,终止密码子为１６１４位的ＴＧＡ,推测其编码一个３８９个氨基酸的蛋白质产物。利用ＢＬＡＳＴＸ程序进行了分析揭示,此基因编码一个肌氨酸单体     

A vector for sequencing long (40-kb) DNA fragments

An improved vector (pAA113M) has been constructed for sequencing long (40-kb) DNA fragments. The DNA fragment is cloned in the tet gene of the cosmid and subdivided into numerous overlapping segments by IS1-promoted deletions. Plasmids bearing these deletions are fractionated by gel electrophoresis, and shortened further from the opposite end by treatment with specific restriction endonucleases. Thus, a series of short overlapping segments, spread across the entire length of the fragment, become fused to IS1. Each segment can then be sequenced by the dideoxy method using an IS1 primer. The plasmids can replicate either from their normal origin or, in the presence of a filamentous helper phage, from the M13 origin. Hence, each segment can be sequenced as either double-stranded DNA or single-stranded DNA. Sequences of IS1-promoted and restriction enzyme-generated deletions contain overlaps that can be used to assemble the complete 40-kb sequence.     

Rapid and reliable fluorescent cycle sequencing of double-stranded templates.

Automated DNA sequencing is an extremely valuable technique which requires very high quality DNA templates to be carried out successfully. While it has been possible to readily produce large numbers of such templates from M13 or other single-stranded vectors for several years, the sequencing of double-stranded DNA templates using the ABI 373 DNA Sequencer has had a considerably lower success rate. We describe how the combination of a new fluorescent, dideoxy sequencing method, called cycle-sequencing, coupled with modifications to template isolation procedures based on Qiagen columns, makes fluorescent sequencing of double-stranded templates a reliable procedure. From a single five milliliter culture enough DNA can be isolated (up to 20 micrograms) to do 4-8 sequencing reactions, each of which yields 400-500 bases of high quality sequence data. These procedures make the routine use of double-stranded DNA templates a viable strategy in automated DNA sequencing projects.     

Rapid identification of clones using the same degenerate oligonucleotide mixture for both screening and sequencing

A simple and rapid strategy for distinguishing between positively hybridizing colonies and false positive-hybridization signals is described. The isolation of a specific DNA sequence depends on the ability to distinguish between a clone that contains the correct sequence and a false hybridization-positive or background signal. This procedure utilizes the same oligonucleotide mixture both as a screening probe and as a sequencing primer. The mixture of oligonucleotides is used as a primer to obtain sequence information directly from double-stranded DNA. Conditions for sequencing with oligonucleotides having up to 64-fold degeneracy are described. Since the sequence information obtained is directly adjacent to the site of oligonucleotide:DNA hybridization, it is necessary to know only a minimal length of DNA or peptide sequence to both design oligonucleotide probes and confirm the authenticity of the hybridization positives. The advantages of the degenerate oligonucleotide sequencing method include the rapid, reliable identification of authentic versus false hybridization positives made directly without subcloning into single-stranded M13 phage, without sequencing large regions of DNA, or without synthesizing sequence-specific primers.     

An improved strategy for generating a family of unidirectional deletions on large DNA fragments

A modification of the Barnes "kilo-sequencing" method is described. The procedure presented here makes it possible to obtain a series of nested deletions on large DNA fragments in only two days. It applies to double-stranded DNA, and thus can be used with plasmids as well as the M13mp series of bacteriophages. The main improvements are the use of a second restriction enzyme, which makes it possible to begin the deletions at any site on the DNA fragment, and the use of mung bean nuclease for trimming the DNA edges so that any restriction enzyme can be used. This method, using a pUC vector and sequencing on double-stranded DNA, would make it possible to read a DNA nucleotide sequence on both strands starting with only one construction.     

A rapid method for purifying PCR products for direct sequence analysis

An HPLC approach for purification and sequencing of double-stranded DNA obtained directly from a PCR is described. This simple and reliable procedure has several advantages; the DNA fragment is rapidly eluted (less than 7 minutes), requires no organic cleanup, produces several hundred bases of sequence and is sensitive enough to obtain DNA sequence from a single 100-microliters PCR. This method is demonstrated by sequencing tumor necrosis factor alpha (TNF alpha) gene amplified from mouse tail DNA.     

DNA fiber mapping techniques for the assembly of high-resolution physical maps.

High-resolution physical maps are indispensable for directed sequencing projects or the finishing stages of shotgun sequencing projects. These maps are also critical for the positional cloning of disease genes and genetic elements that regulate gene expression. Typically, physical maps are based on ordered sets of large insert DNA clones from cosmid, P1/PAC/BAC, or yeast artificial chromosome (YAC) libraries. Recent technical developments provide detailed information about overlaps or gaps between clones and precisely locate the position of sequence tagged sites or expressed sequences, and thus support efforts to determine the complete sequence of the human genome and model organisms. Assembly of physical maps is greatly facilitated by hybridization of non-isotopically labeled DNA probes onto DNA molecules that were released from interphase cell nuclei or recombinant DNA clones, stretched to some extent and then immobilized on a solid support. The bound DNA, collectively called "DNA fibers," may consist of single DNA molecules in some experiments or bundles of chromatin fibers in others. Once released from the interphase nuclei, the DNA fibers become more accessible to probes and detection reagents. Hybridization efficiency is therefore increased, allowing the detection of DNA targets as small as a few hundred base pairs. This review summarizes different approaches to DNA fiber mapping and discusses the detection sensitivity and mapping accuracy as well as recent achievements in mapping expressed sequence tags and DNA replication sites.     

Complete sequence of the coding region of human elongation factor 2 (EF-2) by enzymatic amplification of cDNA from human ovarian granulosa cells

The use of two primers allowed the specific enzymatic amplification of elongation factor 2 starting with total double-stranded cDNA from human ovarian granulosa cells. The amplified DNA fragment with a length of 1765 bp was restricted and sequenced by the shot gun approach. From the sequences obtained from the amplified fragment and the cDNA insert of pHGR81 [Rapp et al. (1988) Biol. Chem. Hoppe-Seyler 369, 247-250] respectively, the DNA sequence containing the complete coding as well as the 3'-untranslated region was assembled.     

Strategy to sequence the genome of Corynebacterium glutamicum ATCC 13032: use of a cosmid and a bacterial artificial chromosome library

The initial strategy of the Corynebacterium glutamicum genome project was to sequence overlapping inserts of an ordered cosmid library. High-density colony grids of approximately 28 genome equivalents were used for the identification of overlapping clones by Southern hybridization. Altogether 18 contiguous genomic segments comprising 95 overlapping cosmids were assembled. Systematic shotgun sequencing of the assembled cosmid set revealed that only 2.84 Mb (86.6%) of the C. glutamicum genome were represented by the cosmid library. To obtain a complete genome coverage, a bacterial artificial chromosome (BAC) library of the C. glutamicum chromosome was constructed in pBeloBAC11 and used for genome mapping. The BAC library consists of 3168 BACs and represents a theoretical 63-fold coverage of the C. glutamicum genome (3.28 Mb). Southern screening of 2304 BAC clones with PCR-amplified chromosomal markers and subsequent insert terminal sequencing allowed the identification of 119 BACs covering the entire chromosome of C. glutamicum. The minimal set representing a 100% genome coverage contains 44 unique BAC clones with an average overlap of 22 kb. A total of 21 BACs represented linking clones between previously sequenced cosmid contigs and provided a valuable tool for completing the genome sequence of C. glutamicum.     

The CTAB-DNA precipitation method: a common mini-scale preparation of template DNA from phagemids, phages or plasmids suitable for sequencing

This report describes a common method of obtaining template DNA from phagemids, phages and plasmids. The strategy is based on the use of the cationic detergent cetyl-trimethylammonium bromide (CTAB) for DNA precipitation. By avoiding phase separation, many manipulation steps are reduced. A time-saving modification to perform double-stranded DNA sequencing directly after alkaline-denaturation is also introduced. The protocols described here allow the researcher to obtain template DNA from a variety of initial sources, thus giving reproducible sequencing results when using T7 DNA polymerase.     

Large scale sequencing projects using rapidly prepared double-stranded plasmid DNA.

We have developed a simple rapid plasmid DNA mini-preparation method which yields DNA of sufficient quality to be used in large scale sequencing projects. The method, which is a modification of the alkaline method of Birnboim and Doly (1979), requires less than two hours. We have eliminated the use of organic extractions, RNase digestion and alkaline denaturation of the DNA for annealing of the primer. The proportion of supercoiled plasmid DNA obtained is close to 100%. Greater than 80% of the clones yield at least 500 bp of sequence information per primer. The sequencing reactions from these double-stranded templates can be done on both strands using the universal and reverse sequence primers with the usual two reactions per primer, one to read close to the primer and one to read far from it. Thus, each clone yields at least 1 kb of sequence information. The preparation of the templates and the sequencing reactions can be done in less than three hours so that the sequencing gel can be run the same day.     

Seamless gene engineering using RNA- and DNA-overhang cloning

Here we describe two methods for generating DNA fragments with single-stranded overhangs, like those generated by the activity of many restriction enzymes, by simple methods that do not involve DNA digestion. The methods, RNA-overhang cloning (ROC) and DNA-overhang cloning (DOC), generate polymerase chain reaction (PCR) products composed of double-stranded (ds) DNA flanked by single-stranded (ss) RNA or DNA overhangs. The overhangs can be used to recombine DNA fragments at any sequence location, creating "perfect" chimeric genes composed of DNA fragments that have been joined without the insertion, deletion, or alteration of even a single base pair. The ROC method entails using PCR primers that contain regions of RNA sequence that cannot be copied by certain thermostable DNA polymerases. Using such a chimeric primer in PCR would yield a product with a 5' overhang identical to the sequence of the RNA component of the primer, which can be used for directional ligation of the amplified product to other preselected DNA molecules. This method provides complete control over both the length and sequence of the overhangs, and eliminates the need for restriction enzymes as tools for gene engineering.