Possible involvement of the ugpA gene product in the stable maintenance of mini-F plasmid in Escherichia coli

Summary The seg-3 mutant Escherichia coli does not support the maintenance of mini-F plasmid at 42° C. We cloned the chromosomal DNA segment of the wild-type strain W3110 that complements the Seg^– phenotype of this mutant. Cleavage mapping of this segment showed that it was derived from the 76-min region of the E. coli chromosome map. Complementation tests using plasmids carrying subcloned DNA segments suggested that the seg-3 mutant carried two mutations that additively affected the maintenance of mini-F plasmid; one was in the ugpA gene and the other was presumably in the rpoH gene. We generated a disrupted ugpA null mutant and found that the mini-F plasmid was unstable in this ugpA null mutant even at 30° C. This suggests that the ugpA gene product is required for the stable maintenance of mini-F plasmid.     

Partitioning of the F plasmid: Overproduction of an essential protein for partition inhibits plasmid maintenance

Summary Multicopy plasmids carrying the sopB gene of the F plasmid inhibit stable inheritance of a coexisting mini-F plasmid. This incompatibility, termed IncG, is found to be caused by excess amounts of the SopB protein, which is essential for accuratepartitioning of plasmid DNA molecules into daughter cells. A sopB-carrying multicopy plasmid that shows the IncG⁺ phenotype was mutagenized in vitro and IncG negative mutant plasmids were isolated. Among these amber and missense mutants of sopB, mutants with a low plasmid copy number and a mutant in the Shine-Dalgarno sequence for translation of the SopB protein were obtained. These results demonstrate that the IncG phenotype is caused by the SopB protein, and that the incompatibility is expressed only when the protein is overproduced. This suggests that the protein must be kept at appropriate concentrations to ensure stable maintenance of the plasmid.     

Autoregulation of the partition genes of the mini-F plasmid and the intracellular localization of their products in Escherichia coli

The sopAB operon and the sopC sequence, which acts as a centromere, are essential for stable maintenance of the mini-F plasmid. Immunoprecipitation experiments with purified SopA and SopB proteins have demonstrated that these proteins interact in vitro. Expression studies using the lacZ gene as a reporter revealed that the sopAB operon is repressed by the cooperative action of SopA and SopB. Using immunofluorescence microscopy, we found discrete fluorescent foci of SopA and SopB in cells that produce both SopA and SopB in the presence of the sopC DNA segment, but not in the absence of sopC, suggesting the SopA-SopB complex binds to sopC segments. SopA was exclusively found to colocalize with nucleoids in cells that produced only SopA, while, in the absence of SopA, SopB was distributed in the cytosolic spaces. Received: 14 July 1997 / Accepted: 3 October 1997     

ATPase activity of SopA, a protein essential for active partitioning of F plasmid

Summary The SopA, B, C genes of the F plasmid play an essential role in plasmid partitioning during cell division in Escherichia coli. In this paper, the products of the sopA and sopB genes were isolated and their biochemical activities studied. [-³²P]ATP was cross-linked to the SopA protein by UV irradiation; this cross-linking was observed only in the presence of magnesium ion, and was competitively inhibited in the presence of non-radioactive ATP, ADP and dATP, but not other NTPs or dNTPs. In contrast, no ATP binding activity was detected for the SopB protein. The SopA protein showed a modest magnesium ion-dependent ATPase activity and this activity was stimulated in the presence of DNA. The ATPase activity in the presence of DNA was further stimulated by addition of the SopB protein. However, the SopB protein alone failed to stimulate the ATPase activity.     

Distribution of plasmid maintenance regions among IncFIV plasmids

The distribution of the IncFI basic replicons among IncFIV plasmids was assessed by DNA hybridization. In addition these and 20 other plasmids from 16 incompatibility groups were screened for the presence of IncIV, an incompatibility determinant recently found on the IncFIV plasmid R124. The IncIV determinant was found commonly but not universally among the IncFIV plasmids. It was also detected on the IncFI reference plasmid R386 and plasmids from IncB, IncI alpha and IncI gamma. The frequency and distribution of IncFI replicons among the IncFIV plasmids is similar to that observed in other F groups. The similarity of the IncFIV plasmids to plasmids of the other IncF groups and the failure to find replicons unique to IncFIV plasmids indicates that their division into a separate incompatibility group is not justified.     

Purification and characterization of the N gene product of bacteriophage lambda

The N protein (pN) specified by bacteriophage λ is an antitermination factor and is required for phage development. pN can be assayed by making use of the observation that the in vitro synthesis of trp mRNA in a reaction programmed with DNA template from λtrp transducing phage bearing N

A gene, SMP2, involved in plasmid maintenance and respiration in Saccharomyces cerevisiae encodes a highly charged protein

Summary The smp2 mutant of Saccharomyces cerevisiae shows increased stability of the heterologous plasmid pSR1 and YRp plasmids. A DNA fragment bearing the SMP2 gene was cloned by its ability to complement the slow growth of the smp2 smp3 double mutant (smp3 is another mutation conferring increased stability of plasmid pSR1). The nucleotide sequence of SMP2 indicated that it encodes a highly charged 95 kDa protein. Disruption of the genomic SMP2 gene resulted in a respiration-deficient phenotype, although the cells retained mitochondrial DNA, and showed increased stability of pSR1 like the original smp2 mutant. The fact that the smp2 mutant is not always respiration deficient and shows increased pSR1 stability even in a rho ⁰ strain lacking mitochondrial DNA suggested that the function of the Smp2 protein in plasmid maintenance is independent of respiration. The SMP2 locus was mapped at a site 71 cM from lys7 and 21 cM from ilv2/SMR1 on the right arm of chromosome XIII.     

Analysis of the F plasmid centromere

Summary The nucleotide sequence of the cis-acting partition site (centromere) of the miniF plasmid has been determined. Its most notable feature is a reiterated 43 base pair unit. A series of plasmids deleted for portions of the repeat region was constructed and tested for incompatibility with R386 and for stability of inheritance. The extent of incompatibility with R386 was correlated with the number of repeat units. In contrast, the great majority of the repeats were not needed for miniF stability. An adjacent region of unique sequence was also found to be involved in centromere function.     

Chromosomal genes essential for stable maintenance of the mini-F plasmid in Escherichia coli

We have isolated mutants of Escherichia coli which do not support stable maintenance of mini-F plasmids (delta ccd rep+ sop+). These host mutations, named hop, were classified into five linkage groups on the E. coli chromosome. Genetic analyses of these hop mutations by Hfr mating and P1 transduction showed their loci on the E. coli genetic map to be as follows: hopA in the gyrB-tnaA region, hopB in the bglB-oriC region, hopD between 8 and 15 min, and hopE in the argA-thyA region. Kinetics of stability of the sop+ and delta sop mini-F plasmids in these hop mutants suggest that the hopA mutants are defective in partitioning of mini-F rather than in plasmid replication. The hopB, hopC, and hopD mutants were partially defective in replication of mini-F. The physical structure of the plasmid DNA was normal in hopA, B, C, and D mutants. Large amounts of linear multimers of plasmid DNA accumulated in mutants of the fifth linkage group (hopE). None of the hop mutations in any linkage group affected the normal growth of cells.     

Electroporation and stable maintenance of plasmid DNAs in a biocontrol strain of Pseudomonas syringae

Transformation efficiencies as high as 10⁷ transformants g^–1 DNA have been previously reported for pseudomonads using electroporation protocols established for E. coli with plasmid DNAs prepared from methylation proficient E. coli hosts. We report here a protocol for electroporation of plasmid DNAs into a biocontrol strain of Pseudomonas syringae which could not be electroporated by standard E. coli methods. Transformation efficiencies of 10⁷ or higher were obtained with DNA recovered from initial P. syringae transformation or with DNA prepared from methylation deficient E. coli. Both plasmids used in this study were stably maintained in the absence of selection for at least 50 generations.     

Replication of the promiscuous plasmid pLSI: a region encompassing the minus origin of replication is associated with stable plasmid inheritance

Deletion of a region of the promiscuous plasmid pLS1 encompassing the initiation signals for the synthesis of the plasmid lagging strand led to plasmid instability in Streptococcus pneumoniae and Bacillus subtilis. This defect could not be alleviated by increasing the number of copies (measured as double-stranded plasmid DNA) to levels similar to those of the wild-type plasmid pLS1. Our results indicate that in the vicinity of, or associated with the single-stranded origin region of pLS1 there is a plasmid component involved in its stable inheritance. Homology was found between the DNA gyrase binding site within the par region of plasmid pSC101 and the pLS1 specific recombination site RS_R.     

Location of a second partitioning region (ParL) on the F plasmid

Abstract The leading region of the F plasmid has been found to extend the maintenance of the normally unstable plasmid vector pACYC184. This ability is due to effective partitioning of plasmid molecules at cell division. Cloning, deletion analysis and transposon mutagenesis have located the partitioning region (ParL) to be encoded within 63.65–64.11F. Complementation studies indicated that parL is a cis -acting locus.     

The repeated sequences (incB) preceding the protein E gene of plasmid mini-F are essential for replication

Summary At the XhoI site (45.08F) of plasmid mini-F a deletion of 649 bp was generated employing exonuclease Bal31. By this deletion nucleotide sequences functioning as origin II and the four 19 bp direct repeats constituting the incB region in front of the E protein gene were removed from the plasmid. Analysis of proteins radioactively labelled in Escherichia coli mini-cells indicated that all mini-F encoded proteins are expressed. However, the plasmid carrying the deletion was not capable of replicating from the primary origin (origin I, 42.6F). Recently a smaller deletion at the XhoI site (45.08F) of about 300 bp, removing only the region functioning as origin II and replicating from origin I, was described by Tanimoto and Iino (1984, 1985). The data presented suggest that the incB repeats are essential for the initiation of replication from origin I, and possibly also from origin II, and seem not to be engaged in the autoregulation of E protein expression.     

Roles of Escherichia coli heat shock proteins DnaK, DnaJ and GrpE in mini-F plasmid replication

Summary A subset of Escherichia coli heat shock proteins, DnaK, DnaJ and GrpE were shown to be required for replication of mini-F plasmid. Strains of E. coli K12 carrying a missense mutation or deletion in the dnaK, dnaJ, or grpE gene were virtually unable to be transformed by mini-F DNA at the temperature (30° C) that permits cell growth. When excess amounts of the replication initiator protein (repE gene product) of mini-F were provided by means of a multicopy plasmid carrying repE, these mutant bacteria became capable of supporting mini-F replication under the same conditions. However, the copy number of a high copy number mini-F plasmid was reduced in these mutant bacteria as compared with the wild type in the presence of excess RepE protein. Furthermore, mini-F plasmid mutants that produce altered initiator protein and exhibit a very high copy number were able to replicate in strains deficient in any of the above heat shock proteins. These results indicate that the subset of heat shock proteins (DnaK, DnaJ and GrpE) play essential roles that help the functioning of the RepE initiator protein in mini-F DNA replication.     

Industrial scale production of plasmid DNA for vaccine and gene therapy: plasmid design, production, and purification

The past several years have witnessed a rapidly increasing number of reports on utilizing plasmid DNA as a vector for the introduction of genes into mammalian cells for use in both gene therapy and vaccine applications. “Naked DNA vaccines” allow the foreign genes to be transiently expressed in transfected cells, mimicking intracellular pathogenic infection and triggering both the humoral and cellular immune responses. While considerable attention has been paid to the potential of such vaccines to mitigate a number of infections, substantially less consideration has been given to the practical challenges of producing large amounts of plasmid DNA for therapeutic use in humans, for both clinical studies and, ultimately, full-scale manufacturing. Doses of naked DNA vaccines are on the order of milligrams, while typical small-scale Escherichia coli fermentations may routinely yield only a few mg/l of plasmid DNA. There have been many investigations towards optimizing production of heterologous proteins over the past three decades, but in these cases, the plasmid DNA was not the final product of interest. This review addresses the current state-of-the-art means for the production of plasmid DNA at large scale in compliance with existing regulatory guidelines. The impact of the nature of the plasmid vector on the choice of fermentation protocols is presented, along with the effect of varying cultivation conditions on final plasmid content. Practical considerations for the large-scale purification of plasmid DNA are also discussed.     

Enhanced high copy number plasmid maintenance and heterologous protein production in an Escherichia coli biofilm

Escherichia coli has been widely used for heterologous protein production (HPP). To determine whether a biofilm environment could benefit E. coli HPP using high copy number plasmids, we compared plasmid maintenance and HPP by E. coli ATCC 33456 containing plasmid pEGFP (a pUC family vector) cultivated in biofilms and in suspended culture. Cells were grown with or without antibiotic selective pressure in flow cells or chemostats for up to 6 days. In biofilms, antibiotic selective pressure increased the plasmid copy number (PCN), but by 144 h, biofilms grown in antibiotic-free media had comparable plasmid concentrations. In the chemostat, the PCN declined steadily, although 100 ppm ampicillin in the medium slowed the rate of plasmid loss. Production of green fluorescent protein (GFP), a representative heterologous protein, was quantified by flow cytometry. In biofilms, at ampicillin concentrations >or=33 ppm, strongly fluorescent cells comprised more than half of the population by 48 h. In the chemostat, more than 50% of the population was non-fluorescent by 48 h in media containing 100 ppm ampicillin, and strongly fluorescent cells were <10% of the population. Biofilm structure was determined by confocal microscopy. Maximum biofilm thickness ranged from 30 to 45 microns, with no significant changes in biofilm structure after 48 h. Plasmid multimer percentages were similar to inocula for cells cultivated in either biofilms or the chemostat. The results indicate that the biofilm environment enhanced both plasmid maintenance and cellular GFP concentrations, and that low levels of antibiotic increased the beneficial effect.