Measurement of biodegradable substances using the salt-tolerant yeast Arxula adeninivorans for a microbial sensor immobilized with poly(carbamoyl) sulfonate (PCS) Part I: Construction and characterization of the microbial sensor

A microbial biosensor based on the yeast Arxula adeninivorans LS3 has been developed for measurement of biodegradable substances. Arxula is immobilized in the hydrogel poly(carbamoyl) sulfonate (PCS). The immobilized yeast membrane is placed in front of an oxygen electrode with -600 mV versus Ag/AgCl. Arxula is salt tolerant; it can give a stable signal up to 2.5 M NaCl in sample (120 mM in measuring cell). The sensor's measurements are highly correlated to BOD5 measurements. It has a very high stability which can last for 40 day without any decrease in signal. The linear range of the sensor is up to a corresponding BOD value of 550 mg/l.     

Measurement of biodegradable substances using the salt-tolerant yeast Arxula adeninivorans for a microbial sensor immobilized with poly(carbamoyl)sulfonate (PCS). Part II: Application of the novel biosensor to real samples from coastal and island regions

A microbial sensor for rapid measurement of the amount of biodegradable substances based on the salt-tolerant yeast Arxula adeninivorans LS3 has been developed especially for coastal and island regions. Our parameter, the so-called sensorBOD, that is available after only a few minutes, agrees with the 5-day value for the biochemical oxygen demand (BOD5) very well. We have employed the Arxula sensor in the short-time estimation and supervision of the BOD of both domestic and industrial wastewater with high salinity. The novel sensor makes it possible to monitor the different types of wastewater rapidly without pretreatment, and it can be used for an active process control of sewage treatment works. Compared to a commercially available sensor, the novel sensor achieves better agreement between sensorBOD and BOD5 measurements with salt containing samples.     

Screening of yeast strains for phytase activity

A screening method was developed to elucidate the ability of different yeast strains to utilize phytic acid as sole phosphorus source. The growth test in liquid culture in a microtiter plate with phytic acid as sole phosphorus source was shown to be a reliable, fast and easy-to-use screening method. We tested 122 strains from 61 species with our method and observed growth differences among species and strains that were not detectable on solid medium. Specific phytase activities were measured for 10 yeasts strains, selected due to their strong growth in the liquid medium. Strains of Arxula adeninivorans and Pichia anomala reached the highest volumetric phytase activities. Arxula adeninivorans also displayed the highest intra- and extracellular specific activities. There were large differences in both extra- and intracellular phytase activities among species. Strain-specific extracellular phytase activities were detected in P. anomala . The presence of free phosphate in the media completely suppressed the extracellular phytase activity and also reduced intracellular phytase activity for all tested yeast strains.     

Designing an amperometric thick-film microbial BOD sensor

Thick film oxygen electrodes manufactured by screen print method have been used as a transducer for a biochemical oxygen demand (BOD) sensor. The kinetics of the immobilized yeast, Arxula adeninivorans (Arxula) has been studied. The apparent KM of immobilized Arxula (> 100 microM) is higher than free cells of Arxula (70 microM). The increase in KM caused by the effect of immobilization extends the linear range of the sensor. End-point measurement and quasi-kinetic measurement have been studied comparatively as measurement procedures with a good correlation. The Vmax for end-point measurement is 790.7 microM/s and that for quasi-kinetic measurement is 537.3 microM/s. The limit of detection is calculated 1.24 mg/l BOD. Using the quasi-kinetic measurement, instead of end-point measurements, the measuring time can be reduced from 5-30 min to 100 s. The sensor layer thickness or increase in the layer of covering gel can increase the KM that is accompanied with the extension of the linear range of the sensor. Nevertheless, increase in the layer of covering gel will not increase the saturation signal. Domestic wastewater was checked by the thick film BOD sensor and the results are satisfactory.     

High-level production and secretion of recombinant proteins by the dimorphic yeast Arxula adeninivorans

The non-conventional dimorphic thermo- and salt-resistant yeast Arxula adeninivorans has been developed as a host for heterologous gene expression. For assessment of the system two model genes have been selected: the GFP gene encoding the intracellular green fluorescent protein, and the HSA gene encoding the secreted human serum albumin. The expression system includes two host strains, namely A. adeninivorans LS3, which forms budding cells at 30 degrees C and mycelia at >42 degrees C, and the strain A. adeninivorans 135, which forms mycelia at temperatures as low as 30 degrees C. For expression control the constitutive A. adeninivorans-derived TEF1-promoter and S. cerevisiae-derived PHO5-terminator were selected. The basic A. adeninivorans transformation/expression vector pAL-HPH1 is further equipped with the Escherichia coli-derived hph gene conferring hygromycin B resistance and the 25S rDNA from A. adeninivorans for rDNA targeting. Transformants were obtained for both budding cells and mycelia. In both cell types similar expression levels were achieved and the GFP was localised in the cytoplasm while more than 95% of the HSA accumulated in the culture medium. In initial fermentation trials on a 200-ml shake flask scale maximal HSA product levels were observed after 96 h of cultivation.     

Morphology-related effects on gene expression and protein accumulation of the yeast Arxula adeninivorans LS3

The dimorphism of the yeast Arxula adeninivorans LS3 is regulated by cultivation temperatures. Up to 42 degrees C the yeast grows as budding cells, which turn to mycelia at higher temperatures. To test whether the dimorphism is exclusively induced by high temperatures or also by other conditions, mutants were selected with an altered behaviour with respect to dimorphism. After mutagenesis with N-methyl-N'-nitro-N-nitrosoguanidine, five of 25,000 colonies formed a very rough surface consisting of mycelia at 30 degrees C, in contrast to the wild-type. These mutants allow temperature-mediated and morphology-related effects on gene expression and protein accumulation to be distinguished. Budding cells and mycelia showed different expression of genes encoding secretory proteins at the same temperature. Mycelia secreted two-fold more protein than budding cells, including the enzymes glucoamylase and invertase. This indicated that morphology, rather than temperature, is the decisive factor in the analysed processes.     

Production of interleukin-6 in Arxula adeninivorans, Hansenula polymorpha and Saccharomyces cerevisiae by applying the wide-range yeast vector (CoMed) system to simultaneous comparative assessment

A wide-range yeast vector (CoMed) system has been applied to the comparative assessment of three different yeast platforms for the production of human interleukin-6. A vector equipped with an rRNA gene targeting sequence and an Arxula adeninivorans-derived LEU2 gene was used for simultaneous transformation of auxotrophic A. adeninivorans, Hansenula polymorpha and Saccharomyces cerevisiae strains. IL6 was expressed under control of the strong constitutive A. adeninivorans-derived TEF1 promoter, which is functional in all yeast species analyzed so far. Secreted IL-6 was found to be correctly processed from an MFalpha1-IL6 precursor in A. adeninivorans only, whereas N-terminally truncated proteins were observed in H. polymorpha and S. cerevisiae.     

Production of a thermostable alcohol dehydrogenase from Rhodococcus ruber in three different yeast species using the Xplor?2 transformation/expression platform

The Xplor(?)2 transformation/expression platform was employed for comparative assessment of three different yeast species as hosts for synthesis of a thermostable nicotinamide adenine dinucleotide (NAD(+))-dependent medium-chain alcohol dehydrogenase from Rhodococcus ruber strain 219. Using yeast ribosomal DNA (rDNA) integrative expression cassettes (YRCs) and yeast integrative expression cassettes (YICs) equipped with a selection-marker module and one, two or four expression modules for transformation of auxotrophic Arxula adeninivorans, Hansenula polymorpha, and Saccharomyces cerevisiae strains, quantitative comparison of the yield of recombinant alcohol dehydrogenase RR-ADH6Hp in all three species was carried out. In all cases, the RR-ADH6H gene was expressed under the control of the strong constitutive A.?adeninivorans-derived TEF1 promoter, which functions in all yeast species analyzed. Recombinant RR-ADH6Hp accumulated intracellularly in all strains tested. The best yields of active enzyme were obtained from A.?adeninivorans, with S.?cerevisiae producing intermediate amounts. Although H.?polymorpha was the least efficient producer overall, the product obtained was most similar to the enzyme synthesized by R.?ruber 219 with respect to its thermostability.     

Phytase of the yeast Arxula adeninivorans

Of a number of yeasts screened for growth on phytic acid (inositol phosphates) as a sole source of carbon and phosphate, Arxula adeninivorans showed a particularly vigorous growth. This capacity was correlated with the presence of a high activity of secreted phytase. The crude enzyme showed an optimal temperature of at least 75°C and an optimal pH of 4.5. The level of secreted enzyme far exceeded that of previously reported yeast phytases.     

Integration of heterologous genes in several yeast species using vectors containing a Hansenula polymorpha-derived rDNA-targeting element

A method that has been successfully used to generate recombinant Hansenula polymorpha strains by transformation with rDNA-targeting vectors was applied in the present study to a range of alternative yeast hosts, using vectors with an H. polymorpha-derived integration sequence. The dimorphic yeast Arxula adeninivorans, which is currently being assessed for heterologous gene expression, was the main focus of the study. As in H. polymorpha, it was possible to co-integrate more than a single plasmid carrying an expressible gene. Additionally, the vectors were examined in two further species, Pichia stipitis and Saccharomyces cerevisiae. Based on these results the design of a 'universal' fungal vector appears to be feasible.     

Construction of an Arxula adeninivorans host-vector system based on trp1 complementation

A host/vector expression system based on an Arxula adeninivorans Delta atrp1 gene disruption mutant has been constructed. For this purpose the ATRP1 gene encoding a phosphoribosyl anthranilate isomerase was isolated from the yeast A. adeninivorans and its genome locus was characterized. The Delta atrp1 mutant was generated applying an amplified DNA fragment containing the ALEU2m gene flanked by ATRP1 gene sequences of some 750 bp. The generated auxotrophic host strain was transformed with the plasmid pAL-ATRP1-amyA, which contains the ATRP1 gene as selection marker and the 25S rDNA for targeting. For expression assessment, the plasmid was equipped with an expression cassette consisting of the Bacillus amyloliquefaciens-derived amyA gene fused to the constitutive A. adeninivorans-derived TEF1 promoter and Saccharomyces cerevisiae-derived PHO5 terminator. Transformants contained a single chromosomal copy of the heterologous DNA and were found to be mitotically stable. In initial fermentation trials on a 200 ml shake flask scale maximal alpha-amylase product levels of ca. 300 nkat ml(-1) were observed after 72 h of cultivation with more than 95% of the recombinant alpha-amylase accumulated in the culture medium.     

New yeast expression platforms based on methylotrophic Hansenula polymorpha and Pichia pastoris and on dimorphic Arxula adeninivorans and Yarrowia lipolytica - a comparison

Yeasts combine the ease of genetic manipulation and fermentation of a microbial organism with the capability to secrete and to modify proteins according to a general eukaryotic scheme. Yeasts thus provide attractive platforms for the production of recombinant proteins. Here, four important species are presented and compared: the methylotrophic Hansenula polymorpha and Pichia pastoris, distinguished by an increasingly large track record as industrial platforms, and the dimorphic species Arxula adeninivorans and Yarrrowia lipolytica, not yet established as industrial platforms, but demonstrating promising technological potential, as discussed in this article.     

Assessment of Hansenula polymorpha and Arxula adeninivorans-derived rDNA-targeting elements for the design of Arxula adeninivorans expression vectors

Different targeting sequences derived from the Arxula adeninivorans and Hansenula polymorpha rDNA clusters were tested in A. adeninivorans integration/expression vectors. For element identification, the rDNA unit of A. adeninivorans (accession number ) was first isolated and characterized in addition to the known H. polymorpha unit. The rDNA is a cluster of some forty 7653-bp units without the 5S rDNA gene. The selected elements were integrated into a set of A. adeninivorans expression/integration vectors harbouring a TEF1 promoter - amyA ORF - PHO5 terminator sequence as reporter gene. No differences in mitotic stability, copy number and transformation frequency were observed. All transformants harboured a single copy integrated into the rDNA by a homologous recombination. In contrast, the choice of the rDNA targeting sequence was found to be of impact on productivity. Use of ETS-18S-5.8S fragments from both organisms resulted in a more than 50% increase in comparison to the use of other elements, independent of the orientation within the vector.     

Biotransformation of (+)limonene and (-)piperitone by yeasts and yeast-like fungi

Arxula adeninivorans and Yarrowia lipolytica converted (+)limonene to perillic acid (0.06 and 1.0 g/l; yield 3% and 50%) and (-)piperitone to 7-hydroxy-piperitone (0.06 and 0.04 g/l; yield 12% and 8%). Two unclassified strains of the basidiomycetes, Trichosporon, transformed (+)limonene to isopiperitenone (0.05 and 0.4 g/l; yield 2% and 20%) and trans-1,2-dihydroxy-limonene (0.6 g/l; yield 30%) and (-)piperitone to trans-6-hydroxy-piperitone (0.1 and 0.2 g/l; yield 20% and 40%) and 2-isopropyl-5-methyl-hydroquinone (0.8 g/l; yield 16%).     

Improved production of heterologous proteins by a glucose repression-defective mutant of Kluyveromyces lactis

The secreted production of heterologous proteins in Kluyveromyces lactis was studied. A glucoamylase (GAA) from the yeast Arxula adeninivorans was used as a reporter protein for the study of the secretion efficiencies of several wild-type and mutant strains of K. lactis. The expression of the reporter protein was placed under the control of the strong promoter of the glyceraldehyde-3-phosphate dehydrogenase of Saccharomyces cerevisiae. Among the laboratory strains tested, strain JA6 was the best producer of GAA. Since this strain is known to be highly sensitive to glucose repression and since this is an undesired trait for biomass-oriented applications, we examined heterologous protein production by using glucose repression-defective mutants isolated from this strain. One of them, a mutant carrying a dgr151-1 mutation, showed a significantly improved capability of producing heterologous proteins such as GAA, human serum albumin, and human interleukin-1beta compared to the parent strain. dgr151-1 is an allele of RAG5, the gene encoding the only hexokinase present in K. lactis (a homologue of S. cerevisiae HXK2). The mutation in this strain was mapped to nucleotide position +527, resulting in a change from glycine to aspartic acid within the highly conserved kinase domain. Cells carrying the dgr151-1 allele also showed a reduction in N- and O-glycosylation. Therefore, the dgr151 strain may be a promising host for the production of heterologous proteins, especially when the hyperglycosylation of recombinant proteins must be avoided.     

Inducible amplification of gene copy number and heterologous protein production in the yeast Kluyveromyces lactis.

Heterologous protein production can be doubled by increasing the copy number of the corresponding heterologous gene. We constructed a host-vector system in the yeast Kluyveromyces lactis that was able to induce copy number amplification of pKD1 plasmid-based vectors upon expression of an integrated copy of the plasmid recombinase gene. We increased the production and secretion of two heterologous proteins, glucoamylase from the yeast Arxula adeninivorans and mammalian interleukin-1beta, following gene dosage amplification when the heterologous genes were carried by pKD1-based vectors. The choice of the promoters for expression of the integrated recombinase gene and of the episomal heterologous genes are critical for the mitotic stability of the host-vector system.     

A novel estrogen sensor based on recombinant Arxula adeninivorans cells

A novel yeast cell-based assay was developed for the detection of estrogenic activity in wastewater. Recombinant Arxula adeninivorans strains were engineered to co-express the human estrogen receptor alpha (hERalpha) and a Klebsiella-derived phytase (phyK) reporter gene under the control of an A. adeninivorans-derived glucoamylase (GAA) promoter which had been modified by the insertion of estrogen-responsive elements (EREs). In the presence of estrogenic compounds, hERalpha dimerizes and binds to the estrogen. Reporter gene expression is induced by subsequent binding of the hERalpha-dimer/estrogen complex to estrogen responsive elements (ERE) in the promoter. The insertion of different numbers of EREs in three alternative promoter positions and its effect on reporter gene expression were assessed. In one of the constructs, a detection limit of 5 ng l(-1) and a determination limit of 10 ng l(-1) for 17beta-estradiol-like activity was achieved. The photometric assay used enabled estrogen determination in sewage samples within 30 h.     

Amperometric determination of total assimilable sugars in fermentation broths with use of immobilized whole cells

A microbial sensor consisting of immobilized living whole cells of Brevibacterium lactofermentum and an oxygen electrode was prepared for continuous determination of total assimilable sugars (glucose, fructose and sucrose) in a fermentation broth for glutamic acid production. Total assimilable sugars were evaluated from oxygen consumption by the immobilized microorganisms. When a sample solution containing glucose was applied to the sensor system, increased consumption of oxygen by the microorganisms caused a decrease in the dissolved oxygen around the Teflon membrane of the oxygen electrode and the current of the electrode decreased markedly with time until steady state was reached. The response time was ≈ 10 min by the steady state method and 1 min by the pulse method. A linear relationship was found between the decrease in current and the concentration of glucose (<1 mM), fructose (<1 mM) and sucrose (<0.8 mM). The ratio of the sensitivity of the microbial sensor to glucose, fructose and sucrose was 1.00:0.80:0.92. The decrease in current was reproducible to within 2% of the relative standard deviation when a sample solution containing glucose (0.8 mM) was employed for experiments. The selectivity of the microbial sensor for assimilable sugars was satisfactory for use in the fermentation process. The additivity of the response of the microbial sensor for glucose, fructose and sucrose was examined. The difference between the observed and calculated values was within 8%. The microbial sensor was applied to a fermentation broth for glutamic acid production. Total assimilable sugars can be determined by the microbial sensor which can be used for more than 10 days and 960 assays.     

A novel vector element providing multicopy vector integration in Arxula adeninivorans

An Arxula adeninivorans vector element has been identified that provides multicopy integration in an atrp1 host strain. The element consists of the ATRP1 selection marker fused to a newly generated truncated ALEU2 promoter of 53 bp. In the described example eight copies of an amyA expression vector encoding heterologous alpha-amylase from Bacillus amyloliquefaciens are integrated in the genome of the recombinant strain instead of a single copy observed when using the ATRP1 element with the complete promoter. The high copy number results in strains of superior productivity for a secreted recombinant alpha-amylase. The vector design enables the integration of a small vector fragment that consists of yeast DNA only providing high transformation frequencies and a high mitotic stability.