Mathematical model of microporous hollow-fiber membrane extractive fermentor

A mathematical model is presented for a microporous hollow-fiber membrane extractive fermentor (HFEF). The model is based on the continuous flow of the aqueous nutrient phase and cells through the shell space of the fermentor where the fermentation reaction occurs. The product diffuses from the shell space through the hollow-fiber membrane where it is continuously removed by solvent flowing concurrently through the fiber lumen. Results for ethanol production show that the HFEF has a volumetric productivity significantly higher than that possible using conventional methods. The model predicts the existence of an optimum volume fraction of hollow fibers in the fermentor that maximizes the total volumetric productivity. This optimum is the result of a classic trade-off between the volume fraction of the fermentor required for fermentation and that required for efficient removal of the ethanol product to minimize product inhibition.     

Ethanol production in a microporous hollow-fiber-based extractive fermentor with immobilized yeast

Microporous-membrane-based extractive product recovery in product-inhibited fermentations allows in situ recovery of inhibitory products in a nondispersive fashion. A tubular bioreactor with continuous strands of hydrophobic microporous hollow fibers having extracting solvent flowing in fiber lumen was utilized for yeast fermentation of glucose to ethanol. Yeast was effectively immobilized on the shell side in small lengths of chopped microporous hyrophilic hollow fibers. The beneficial effects of in situ dispersion-free solvent ex (oleyl alcohol and dibutyl phthalate) were demonstrated for a 300 g/L glucose substrate feed. Outlet glucose concentration dropped drastically from 123 to 41 g/L as solvent/ substrate flow ratio was increased from 0 to 3 at 9 mL/h of substrate flow rate with oleyl alcohol as extracting solvent. The significant productivity increase with in situ solvent extraction became more evident as solvent/ substrate flow ratio increased. A model of the locally integrated extractive bioreactor describes the observed fermentor performance quite well.     

Rapid ethanol fermentations using vacuum and cell recycle

Cell recycle and vacuum fermentation systems were developed for continuous ethanol production. Cell recycle was employed in both atmospheric pressure and vacuum fermentations to achieve high cell densities and rapid ethanol fermentation rates. Studies were conducted with Saccharomyces cerevisiae (ATCC No. 4126) at a fermentation temperature of 35°C. Employing a 10% glucose feed, a cell density of 50 g dry wt/liter was obtained in atmospheric-cell recycle fermentations which produced a fermentor ethanol productivity of 29.0 g/liter-hr. The vacuum fermentor eliminated ethanol inhibition by boiling away ethanol from the fermenting beer as it was formed. This permitted the rapid and complete fermentation of concentrated sugar solutions. At a total pressure of 50 mmHg and using a 33.4% glucose feed, ethanol productivities of 82 and 40 g/liter-hr were achieved with the vacuum system with and without cell recycle, respectively. Fermentor ethanol productivities were thus increased as much as twelvefold over conventional continuous fermentations. In order to maintain a viable yeast culture in the vacuum fermentor, a bleed of fermented broth had to be continuously withdrawn to remove nonvolatile compounds. It was also necessary to sparge the vacuum fermentor with pure oxygen to satisfy the trace oxygen requirement of the fermenting yeast.     

Ethanol production in a continuous fermentation/membrane pervaporation system

The productivity of ethanol fermentation processes, predominantly based on batch operation in the U.S. fuel ethanol industry, could be improved by adoption of continuous processing technology. In this study, a conventional yeast fermentation was coupled to a flat-plate membrane pervaporation unit to recover continuously an enriched ethanol stream from the fermentation broth. The process employed a concentrated dextrose feed stream controlled by the flow rate of permeate from the pervaporation unit via liquid-level control in the fermentor. The pervaporation module contained 0.1 m² commercially available polydimethylsiloxane membrane and consistently produced a permeate of 20%–23% (w/w) ethanol while maintaining a level of 4%–6% ethanol in a stirred-tank fermentor. The system exhibited excellent operational stability. During continuous operation with cell densities of 15–23 g/l, ethanol productivities of 4.9–7.8 gl^–1 h^–1 were achieved utilizing feed streams of 269–619 g/l glucose. Pervaporation flux and ethanol selectivities were 0.31–0.79 lm^–2 h^–1 and 1.8–6.5 respectively.     

自絮凝颗粒酵母乙醇连续发酵耦合酵母回用工艺的研究

模拟现有酒精发酵行业普遍采用的多级发酵罐串联系统,建立了一套由三级串联操作的搅拌式发酵罐和两个沉降罐组成的反应器系统,以脱胚脱皮玉米粉双酶法制备的糖化液为发酵底物,培养基初始还原糖浓度为220g/L,添加(NH4)2HPO41.5g/L和KH2PO42.5g/L,以0.057h-1的恒定稀释速率流加,将自沉降浓缩后的酵母乳先后经活化和不活化两种方式处理并循环至第一级发酵罐,系统在两种操作条件下分别达到了拟稳态。实验结果表明活化处理对改善发酵工艺技术指标方面发挥了显著的作用,发酵终点乙醇浓度达到101g/L,还原糖和残总糖分别在3.2和7.7g/L左右,发酵系统的设备生产强度指标为5.77g/(L.h),与无酵母回用的搅拌式反应器系统中自絮凝颗粒酵母乙醇发酵工艺相比,提高了70%。     

自絮凝酵母SPSC01在组合反应器系统中酒精连续发酵的研究

建立了一套由四级磁力搅拌发酵罐串联组成、总有效容积4000mL的小型组合生物反应器系统 ,其中一级罐作为种子培养罐。以脱胚脱皮玉米粉双酶法制备的糖化液为种子培养基和发酵底物 ,进行了自絮凝颗粒酵母酒精连续发酵的研究。种子罐培养基还原糖浓度为100g L ,添加 (NH₄)₂HPO₄ 和KH₂PO₄ 各 20g L ,以0.017h^-1 的恒定稀释速率流加 ,并溢流至后续酒精发酵系统。发酵底物初始还原糖浓度 220g/L ,添加 (NH₄)₂HPO₄ 15g/L和KH₂PO₄2 5g/L ,流加至第一级发酵罐 ,稀释速率分别为 0.017、0.025、0.033、0.040和0.05 0h^-1。实验数据表明 ,自絮凝颗粒酵母在各发酵罐中呈部分固定化状态 ,在稀释速率0.040h^-1 条件下 ,发酵系统呈一定的振荡行为 ,其他四个稀释速率实验组均能够达拟稳态。当稀释速率不超过 0 0 33h^-1 ,流出末级发酵罐的发酵液中酒精浓度可以达到 12 % (V/V)以上 ,残还原糖和残总糖分别在 0 11%和 0 35 % h^-1,流出末级发酵罐的发酵液中酒精浓度可以达到12%（V/V）以上,残还原糖和残总糖分别在0.11%和0.35%（W/V）以下。在稀释速率为0.033h^-1时,计算发酵系统酒精的设备生产强度指标为3.32（g·L^-1·h^-1）,与游离酵母细胞传统酒精发酵工艺相比,增加约1倍。     

一步法发酵菊芋生产乙醇

利用马克斯克鲁维酵母(Kluyveromyces marxianus)YX01具有菊粉酶生产能力且乙醇发酵性能良好的特点,直接发酵菊粉生成乙醇.在摇瓶中考察了该菌株最适发酵温度,进而在2.5L发酵罐中考察了通气量和底物浓度的影响.实验结果表明:该菌株最适发酵温度为35℃;在通气量为50 mL/min和100 mL/min时菌体生长加快,发酵时间缩短,但在不通气条件下糖醇转化率明显提高;在菊粉浓度235 g/L时,发酵终点乙醇浓度达到92.2 g/L,乙醇对糖的得率为0.436,为理论值的85.5%.在此基础上,使用近海滩涂种植海水灌溉收获的菊芋为底物,以批式补料方式直接发酵菊芋干粉浓度为280 g/L的底物,发酵终点乙醇浓度为84.0 g/L,乙醇对糖的得率为0.405,为理论值的80.0%.这些研究工作,为以菊芋为原料的燃料乙醇技术开发奠定了基础.     

Simultaneous saccharification and continuous fermentation of sludge-containing mash for bioethanol production by Saccharomyces cerevisiae CHFY0321

A continuous process was employed to improve the volumetric productivity of bioethanol production from cassava mash containing sludge and to simplify the process of ethanol production from cassava. After raw cassava powder was liquefied, it was used directly in a continuous process without sludge filtration or saccharification. A fermentor consisting of four linked stirrer tanks was used for simultaneous saccharification and continuous fermentation (SSCF). Although the mash contained sludge, continuous fermentation was successfully achieved. We chose the dilution rate on the basis of the maximum saccharification time; the highest volumetric productivity and ethanol yield were observed at a dilution rate of 0.028 h?1. The volumetric productivity, final ethanol concentration, and % of theoretical ethanol yield were 2.41 g/Lh, 86.1g/L, and 91%, respectively. This SSCF process using the self-flocculating yeast Saccharomyces cerevisiae CHFY0321 illustrates the possibility of realizing cost-effective bioethanol production by eliminating additional saccharification and filtration processes. In addition, flocculent CHFY0321, which our group developed, showed excellent fermentation results under continuous ethanol production.     

Ethanol fermentation of raw cassava starch with Rhizopus koji in a gas circulation type fermentor

Studies have been conducted in a gas circulation type fermentor in order to characterize the ethanol fermentation of uncooked cassava starch with Rhizopus koji. Results showed that ethanol concentration reached 13-14% (v/v) in 4-day broth, and the maximum productivity of ethanol was 2.3 g ethanol/L broth h. This productivity was about 50% compared to the productivity of a glucose-yeast system. Ethanol yield reached 83.5-72.3% of the theoretical yield for the cassava starch used. The fermentor used in the present work has been proven by experiment to be suitable for ethanol fermentation of the broth with solid substrate.     

Solid-state ethanol fermentation by means of inert gas circulation

A new method for solid-state ethanol fermentation (the SSEF system) was experimented on for the ethanol production from solid starchy materials, where a packedbed-type fermentor was used. Both cultivation of Aspergillus saitoi and enrichment of a saccharifying enzyme were effective for hydrolysis of the starch. Ethanol production was set in by a form of parallel fermentation using a respiration-deficient mutant of Saccharomyces cerevisiae. Produced ethanol was simultaneously stripped by circulating inert gas and separated in a condenser. Average ethanol concentration in the condensate was over 200 g/L, and over 90% of produced ethanol was recovered from the packed bed during 15 or 16 days of stripping. The fermentation efficiency was about 80%, which was evaluated much higher than those of conventional solid-state fermentations. The residue had lesser volume and a higher solids content compared with the distillery wastewaters of conventional liquid-state fermentations. This means an advantage for the treatment and the effective conversion of the residue into fetilizers or animal feeds.     

木薯纤维素乙醇发酵的纤维素酶成本评价

木薯中的纤维素成分约占木薯干重的10％(W/W).文中以木薯燃料乙醇生产的木薯纤维素酒渣为原料,从纤维素酶成本角度评估了三种利用木薯纤维素组分发酵生产乙醇的方法,包括木薯纤维素酒渣的直接糖化和乙醇发酵、木薯纤维素酒渣预处理后的糖化与乙醇发酵、木薯乙醇发酵中同步淀粉与纤维素糖化以及乙醇发酵.结果表明,前两种方法的纤维素利用效率不高,酶成本分别达到13602、11659元/吨乙醇.第三种方法,即在木薯乙醇发酵过程同时加入糖化酶和纤维素酶,进行同步淀粉与纤维素糖化,进而进行乙醇发酵,木薯纤维素乙醇的收益最高.发酵结束时的乙醇浓度从101.5g/L提高到107.0g/L,纤维素酶成本为3 589元/吨乙醇.此方法利用木薯纤维素与木薯淀粉同时进行,不会带来额外的设备及操作投入,酶成本低于产品乙醇价格,可实现盈利,因此第三种方法为木薯纤维用于乙醇发酵的最适方法,本研究结果将为木薯乙醇产业深度利用木薯纤维提供依据.     

Ethanol production from xylose with the yeast Pichia stipitis and simultaneous product recovery by gas stripping using a gas-lift loop fermentor with attached side-arm (GLSA)

The bioconversion of xylose into ethanol with the yeast Pichia stipitis CBS 5773 is inhibited when 20 g/L of ethanol are present in the fermentation broth. In order to avoid this limitation, the fermentation was carried out with simultaneous recovery of product by CO(2) stripping. The fermentation was also improved by attaching a side-arm to the main body of a classical gas-lift loop fermentor. This side-arm increases the liquid circulation, mass transfer, and gas distribution, reducing the amount of oxygen in the inlet gas necessary to perform the fermentation of xylose under microaerobic conditions (K(L)a approximately 16 h(-1)). The continuous stripping of ethanol from the fermentation broth in this new bioreactor system allowed the consumption of higher xylose concentrations than using Erlenmeyer shaker flasks, improved significantly the process productivity and provided a clean ethanol solution by using an ice-cooled condenser system. Finally, a fed-batch fermentation was carried out with a K(L)a = 15.8 h(-1). Starting with 248.2 g of xylose, 237.6 g of xylose was consumed to produce 88.1 g of ethanol which represents 72.6% of the theoretical yield (47.2 g/L of ethanol was recovered in the condenser, while 9.6 g/L remained in the fermentation broth).     

自絮凝酵母高浓度重复批次乙醇发酵

利用发酵性能优良的自絮凝酵母Saccharomyces cerevisiaeflo,研究开发了重复批次高浓度乙醇发酵系统,以节省下游加工过程的能耗。在终点乙醇浓度达到120g/L左右的条件下,发酵系统的乙醇生产强度达到8.2g/(L·h)。然而实验中发现,随着发酵批次的增多,自絮凝酵母沉降性能逐渐下降,从发酵液中沉降分离所需时间相应延长,导致发酵液中高浓度乙醇对酵母的毒害作用加剧,影响其发酵活性和发酵系统运行的稳定性,发酵装置运行11个批次后无法继续运行。实验结果表明,絮凝能力下降导致的酵母絮凝颗粒尺度减小是其沉降性能下降的主要原因。进一步研究发现,酵母的絮凝能力通过再培养可以恢复。在此基础上对发酵系统操作进行改进,每批发酵结束后可控采出一定比例菌体,调节系统的酵母细胞密度和乙醇生产强度以刺激酵母增殖,保持其絮凝能力。在达到相同发酵终点乙醇浓度条件下,虽然发酵系统的乙醇生产强度降低到4.0g/(L·h),但运行10d后絮凝颗粒酵母尺度趋于稳定,继续运行14d,未发现絮凝颗粒酵母尺度继续下降的现象,系统可以稳定运行。     

Studies on continuous ethanol fermentation of sugar cane molasses

Summary A new laboratory system for continuous fermentation is described. It is well suited for fermenting concentrated substrates such as moderately dilute molasses. A rotating microporous filter, which is annexed to the fermentor vessel, allows the free escape of metabolic products while retaining yeast in the fermentor.The slop is recirculated after removal of ethanol by distillation leading to a build-up of non-fermentables. The concentration of these and of yeast cells is checked by a controlled bleed. The described system is a useful tool for small-scale experiments on continuous ethanol fermentation.     

Ethanol fermentation in a yeast immobilized tubular fermentor

In this article, a mathematical model describing the kinetics of ethanol fermentation in a whole cell immobilized tubular fermentor is proposed. Experimental results show reasonable agreement with the proposed model. A procedure for treating the fermentation data for determining the ethanol inhibition constants k(1) and k(2) is described. The ethanol productivity of the immobilized cell fermentor is compared with those of traditional fermentors. Experimental studies indicate that with Saccharomyces cerevisiae (NRRL Y132) culture, ethanol productivity in the range 21.2-83.7 g ethanol L(-1) h(-1) at ethanol concentration of 76-60 g/L can be achieved. This is comparable to or higher than those reported in the literature for yeast. The product yield factor of 0.5 g ethanol/g glucose was obtained. The immobilized cell fermentor does not show washout at dilution rates of 7 h(-1) and shows good stability over a 650-h operating period.     

Control of ethanol production and monitoring of membrane performance by mass-spectrometric gas analysis in the coupled fermentation-pervaporation of whey permeate

A coupled fermentation-pervaporation process was operated continuously with on-line mass spectrometric gas analysis monitoring of product accumulation on both the upstream and the downstream sides of the membrane. Efficient coupling of the fermentation with pervaporation was attained when a steady state of ethanol production and removal was achieved with whey permeate containing high concentrations of lactose (>8%) or by controlled lactose additions that also compensated for loss of liquid due to pervaporation. The combined system consists of a tubular membrane pervaporation module, directly connected to a stirred fermentor to form one circulation loop, kept at 38°C, with both units operating under computer control. Mass spectrometric gas analysis of the CO₂ gas evolved in the fermentor and the ethanol and water in the pervaporate on the downstream side of the membrane enabled us to follow the production of ethanol and its simultaneous removal. Membrane selectivity was calculated on-line and served to monitor the functioning of the membrane. Batch-wise-operated fermentation-pervaporation with Candida pseudotropicalis IP-513 yielded over 120 gl^–1 of concentrated ethanol solution using supplemented whey permeate containing 16% lactose. A steady state lasting for about 20 h was achieved with ethanol productivity of 20 g h^–1 (approx. 4 g l^–1 h^–1). Membrane selectivity was over 8. Controlled feeding of concentrated lactose suspension in the whey permeate (350 g l^–1) resulted in the continuous collection of 120–140 g l^–1 of ethanol pervaporate for 5 days, by which time salt accumulation hampered the fermentation. Medium refreshment restored the fermentative activity of the yeast cells and further extended the coupled process to over 9 days (200 h), when reversible membrane fouling occurred. The membrane module was exchanged and the combined process restarted. Correspondence to: Y. Shabtai     

Process simulation of modified dry grind ethanol plant with recycle of pretreated and enzymatically hydrolyzed distillers' grains

Distillers' grains (DG), a co-product of a dry grind ethanol process, is an excellent source of supplemental proteins in livestock feed. Studies have shown that, due to its high polymeric sugar contents and ease of hydrolysis, the distillers' grains have potential as an additional source of fermentable sugars for ethanol fermentation. The benefit of processing the distillers' grains to extract fermentable sugars lies in an increased ethanol yield without significant modification in the current dry grind technology. Three different potential configurations of process alternatives in which pretreated and hydrolyzed distillers' grains are recycled for an enhanced overall ethanol yield are proposed and discussed in this paper based on the liquid hot water (LHW) pretreatment of distillers' grains. Possible limitations of each proposed process are also discussed. This paper presents a compositional analysis of distillers' grains, as well as a simulation of the modified dry grind processes with recycle of distillers' grains. Simulated material balances for the modified dry grind processes are established based on the base case assumptions. These balances are compared to the conventional dry grind process in terms of ethanol yield, compositions of its co-products, and accumulation of fermentation inhibitors. Results show that 14% higher ethanol yield is achievable by processing and hydrolyzing the distillers' grains for additional fermentable sugars, as compared to the conventional dry grind process. Accumulation of fermentation by-products and inhibitory components in the proposed process is predicted to be 2-5 times higher than in the conventional dry grind process. The impact of fermentation inhibitors is reviewed and discussed. The final eDDGS (enhanced dried distillers' grains) from the modified processes has 30-40% greater protein content per mass than DDGS, and its potential as a value-added process is also analyzed. While the case studies used to illustrate the process simulation are based on LHW pretreated DG, the process simulation itself provides a framework for evaluation of the impact of other pretreatments.     

Enterotoxin production by Vibrio cholerae and Vibrio mimicus grown in continuous culture with microbial cell recycle

We have examined the effect of complete cell recycle on the production of cholera toxin (CT) by Vibrio cholerae and CT-like toxin by Vibrio mimicus in continuous culture fermentations. Complete cell recycle was obtained by filtering culture fluids through Amicon hollow fibers with an exclusion limit of 100,000 daltons (H1P100-20) and returning the concentrated cell slurry to the fermentor. A single 1-liter laboratory fermentor system modified with this recycle loop was capable of producing over 20 liters of cell-free culture filtrate per day. Toxin production in this system was compared with yields obtained in traditional continuous cultures and in shake flask cultures. Yields of CT from V. cholerae 569B in the recycle fermentor were highest at the highest dilution rate employed (1.0 vol/vol per h). The use of complete cell recycle dramatically increased yields over those obtained in continuous culture and equaled those obtained in shake flasks. The concentration of CT in the filtrate was slightly less than half of that measured in culture fluids sampled at the same time. Similarly, V. mimicus 61892 grown in the presence of 50 micrograms of lincomycin per ml produced 280 ng of CT per ml in the recycle fermentor, compared with 210 ng/ml in shake flasks under optimal conditions. The sterile filtrate from this fermentation contained 110 ng/ml.     

Semicontinuous diffusion fermentation of fodder beets for fuel ethanol and cubed protein feed production

A novel, semicontinuous diffusion fermentation system was used to produce fuel ethanol and a cubed protein feed (CPF) from fodder beets at an intermediate scale. In the process, fodder beet cubes were augered diagonally upward against a flow of 0.26N H(2)SO(4) and yeast in a tubular fermentor. Exiting one end of the fermentor was CPF, while fermented beer [6-9% (v/v) ethanol] exited the other end. Retention times for beer and CPF were 264 and 72 h, respectively. Contamination was controlled by maintaining the fermentation pH between 2.1 and 2.6 using H(2)SO(4). Production costs for a greatly scaled-up (times 1400) conceptual version of this system (using a continuous rather than a semicontinuous processing mode) were projected by calculation to be $0.529/L for 95% ethanol (net of a $0.112/L credit for CPF). The calculated energy balance (energy output-energy input ratio) was estimated to be 3.04. In calculating the energy balance, the output energy of the CPF and input energy for growing the fodder beets were not included. A design for the scaled-up plant is provided.     

Increased phenotypic stability and ethanol tolerance of recombinant Escherichia coli KO11 when immobilized in continuous fluidized bed culture

The recombinant Escherichia coli B strain KO11, containing chromosomally-integrated genes for ethanol production, was developed for use in lignocellulose-to-ethanol bioconversion processes but suffers from instability in continuous culture and a low ethanol tolerance compared to yeast. Here we report the ability cell immobilization to improve its phenotypic stability and ethanol tolerance during continuous culture on a 50 g/L xylose feed. Experiments conducted in a vertical tubular fermentor operated as a liquid-fluidized bed with the cells immobilized on porous glass microspheres were compared to control experiments in the same reactor operated as a chemostat without the support particles. Without cell immobilization the ethanol yield fell sharply following start-up, declining to 60% of theoretical after only 8-9 days of continuous fermentation. While immobilizing the cells did not prevent this decline, it delayed its onset and slowed its rate. With immobilization, a stable high ethanol yield (>85%) was maintained for at least 10 days, thereafter declining slowly, but remaining above 70% even after up to 40 days of fermentation. The ethanol tolerance of E. coli KO11 cells was substantially increased by immobilization on the glass microspheres. In ethanol tolerance tests, immobilized cells released from the microspheres had survival rates 2.3- to 15-fold higher than those of free cells isolated from the same broth. Immobilization is concluded to be an effective means of increasing ethanol tolerance in E. coli KO11. While immobilization was only partially effective in combating its phenotypic instability, further improvements can be expected following optimization of the immobilization conditions.