Complete amino-acid sequence of subfragment-2 in adult chicken skeletal muscle myosin

Although the complete amino-acid sequence of the short subfragment-2 (short S-2) and the partial sequence of the hinge region derived from adult chicken skeletal muscle myosin have been reported previously, the sequence of the N-terminal portion of subfragment-2 (S-2) and the connective portion between the above two regions could not be determined. In this study, the amino-acid sequence of these undetermined portions were completely sequenced. Furthermore, overlaps of cyanogen bromide (CNBr) peptides in the hinge region were also isolated and sequenced. Peptides obtained by hydrolysis with dilute formic acid and by digestion with lysyl endopeptidase of S-2 were purified and sequenced. These results established the complete amino-acid sequence of S-2 composed of 429 amino-acid residues. This sequence of adult chicken skeletal muscle myosin was compared with that of chicken embryonic skeletal muscle, chicken gizzard muscle and rabbit cardiac muscle myosin (alpha-myosin heavy chain) and shows degrees of 96%, 38% and 84% sequence identities, respectively. The frequency with which hydrophobic residues are present at position "a" in seven-residues repeats of the hinge region was markedly reduced when compared to the short S-2 sequence of the chicken skeletal muscle myosin.     

Amino-acid sequence of the hinge region in chicken myosin subfragment-2

The CNBr fragments of the hinge region in the carboxyterminal portion of long subfragment-2 derived from adult chicken pectoralis muscle myosin were isolated and sequenced by conventional methods. The alignment of these fragments was deduced from the homology of their sequences with those of other myosins, so that the sequence of the hinge region consisting of 127 amino-acid residues was determined. A comparison of this sequence with that of chicken embryonic skeletal muscle, chicken gizzard muscle and rabbit cardiac muscle (alpha-myosin) shows degrees of 95%, 36% and 82% sequence identities, respectively. Furthermore, the frequency with which hydrophobic residues are present at position "a" in seven-residues repeats of this region was significantly lower than the other portions of the rod.     

Distance measurements near the myosin head-rod junction using fluorescence spectroscopy.

We reacted a fluorescent probe, N-methyl-2-anilino-6-naphthalenesulfonyl chloride (MNS-Ci), with a specific lysine residue of porcine cardiac myosin located in the S-2 region of myosin. We performed fluorescence resonance energy transfer (FRET) spectroscopy measurements between this site and three loci (Cys109, Cys125, and Cys154) located within different myosin light-chain 2s (LC2) bound to the myosin "head". We used LC2s from rabbit skeletal muscle myosin (Cys125), chicken gizzard smooth muscle myosin (Cys109), or a genetically engineered mutant of chicken skeletal muscle myosin (Cys154). The atomic coordinates of these LC2 loci can be closely approximated, and the FRET measurements were used to determine the position of the MNS-labeled lysine with respect to the myosin head. The C-terminus of myosin subfragment-1 determined by Rayment et al. ends abruptly after a sharp turn of its predominantly alpha-helical structure. We have constructed a model based on our FRET distance data combined with the known structure of chicken skeletal muscle myosin subfragment-1. This model suggests that the loci that bracket the head-rod junction will be useful for evaluating dynamic changes in this region.     

Primary structure of myosin heavy chain from fast skeletal muscle of Chum salmon Oncorhynchus keta

The nucleotide sequence of the cDNA encoding myosin heavy chain of chum salmon Oncorhynchus keta fast skeletal muscle was determined. The sequence consists of 5,994 bp, including 5,814 bp of translated region deducing an amino acid sequence of 1,937 residues. The deduced sequence showed 79% homology to that of rabbit fast skeletal myosin and 84-87% homology to those of fast skeletal myosins from walleye pollack, white croaker and carp. The putative binding-sites for ATP, actin and regulatory light-chains in the subfragment-1 region of the salmon myosin showed high homology with the fish myosins (78-100% homology). However, the Loop-1 and Loop-2 showed considerably low homology (31-60%). On the other hand, the deduced sequences of subfragment-2 (533 residues) and light meromyosin (564 residues) showed 88-93% homology to the corresponding regions of the fish myosins. It becomes obvious that several specific residues of the rabbit LMM are substituted to Gly in the salmon LMM as well as the other fish LMMs. This may be involved in the structural instability of the fish myosin tail region.     

Comparative structure of the protease-sensitive regions of the subfragment-1 heavy chain from smooth and skeletal myosins

The heavy chain fragments generated by restricted proteolysis of the smooth chicken gizzard myosin subfragment-1 (S-1) with trypsin, Staphylococcus aureus V8 protease, and chymotrypsin were isolated and submitted to partial amino acid sequencing. The comparison between the smooth and striated muscle myosin sequences permitted the unambiguous structural characterization of the two protease-vulnerable segments joining the three putative domain-like regions of the smooth head heavy chain. The smooth carboxyl-terminal connector is a serine-rich region located around positions 632-640 of the rabbit skeletal sequence and would represent the "A" site that is conformationally sensitive to the myosin 10 S-6 transition and to its interaction with actin (Ikebe, M., and Hartshorne, D. J. (1986) Biochemistry 25, 6177-6185). A third site which undergoes a nucleotide-dependent chymotryptic cleavage which inactivates the Mg2+-ATPase (Okamoto, Y., and Sekine, T. (1981) J. Biochem. (Tokyo) 90, 833-842, 843-849) was identified at Trp-31/Ser-32. It is vicinal to Lys-34 that is monomethylated in the skeletal heavy chain but not at all in the smooth sequence. However, the two trimethyl lysine residues present in the skeletal sequence are conserved in the same regions of the smooth S-1 and may play a general functional role in myosin. The smooth central 50-kDa segment could be selectively destroyed by a mild tryptic digestion in the absence of any unfolding agent, with a concomitant inhibition of the ATPase activities. This feature is in line with the proposed domain structure of the S-1 heavy chain and also suggests a relationship between the specific biochemical properties of the smooth S-1 and the particular conformation of its 50-kDa region.     

Characterization of the active site of platelet myosin in comparison to smooth and skeletal muscle myosin.

Heavy meromyosin subfragment-1 from human platelets and chicken gizzard exhibited an identical chromatographic pattern on agarose-ATP columns both in the absence and in the presence of Ca²⁺ and Mg²⁺. In the presence of Ca²⁺, the behavior differed from that of rabbit white skeletal muscle subfragment-1. The reaction of lysyl residues of platelet myosin with 2,4,6-trinitrobenzene sulfonate did not affect the K⁺- or Mg²⁺-stimulated ATPase activity. A similar behavior was exhibited by chicken gizzard myosin whereas trinitrophenylation of the more active lysyl residues in skeletal muscle myosin caused a marked increase in Mg²⁺-stimulated and a decrease in K⁺-stimulated ATPase activity. These features may point to a similar location of the essential lysyl residue in platelet and smooth muscle myosin, which is different from that of skeletal muscle. Alkylation of thiol groups by N-ethyl maleimide in the absence of added nucleotides resulted in a loss of K⁺-ATPase and in an increase in the Ca²⁺-ATPase in all three myosins, the increase for the skeletal myosin being much greater than for the platelet and chicken gizzard preparations. Alkylation of myosin in the presence of MgADP led to a decrease in K⁺-ATPase of all preparations whereas the Ca²⁺-ATPase as a function of time exhibited a maximum for the platelet and skeletal muscle proteins. These features may point to a certain similarity with respect to the active site of platelet and smooth muscle myosins and a difference between these and skeletal muscle myosin.     

A 72,000-mol-wt protein from tomato inhibits rabbit acto-S-1 ATPase activity

Tomato activation inhibiting protein (AIP) is a molecule of an apparent molecular weight of 72,000 that co-purifies with tomato actin. In an assay system containing rabbit skeletal muscle F-actin and rabbit skeletal muscle myosin subfragment-1 (myosin S-1), tomato AIP dissociated the acto-S-1 complex in the absence of Mg+2ATP and inhibited the ability of F-actin to activate the low ionic strength Mg+2ATPase activity of myosin S-1. At a molar ratio of 5 actin to 1 AIP, a 50% inhibition of the actin-activated Mg+2ATPase activity of myosin S-1 was observed. The inhibition can be reversed by raising the calcium ion concentration to 1 X 10(-5) M. The AIP had no effect on the basal low ionic strength Mg+2ATPase activity of myosin S-1 in the absence of actin. The protein did not bind directly to actin nor did it cause depolymerization or aggregation of F-actin but appeared, instead, to interact with the actin binding site on myosin S-1. Since AIP is a potent, reversible inhibitor of the rabbit acto-S-1 ATPase activity, it is postulated that it may be responsible for the low levels of actin activation exhibited by tomato F-actin fractions containing the AIP.     

Involvement of C-terminal 14 residues of alkali light chain in binding to the heavy chain of myosin

The alkali light chain of rabbit skeletal muscle myosin, A1, was cyanylated with 2-nitro-5-thiocyanobenzoic acid, and the peptide bond at Cys 177 was subsequently cleaved in the presence of 0.05 M CaCl2. Two peptide fragments, from the N-terminal to the residue 176 (CF1) and from the residue 177 to the C-terminal (CF2), were obtained. The CD spectrum and the difference UV absorption spectrum induced by CaCl2 suggested that CF1 largely retained the higher order structure of A1. The CF1 fragment, however, could neither incorporate subfragment-1 (S-1) by an exchange reaction, nor bind with the renatured 20K fragment of S-1 heavy chain. On the other hand, the C-terminal fragment of 14 residues, CF2, could bind with the 20K fragment of S-1 heavy chain. These results indicate that the binding site of the alkali light chain for the heavy chain of myosin is located within the C-terminal 14 residues.     

Structure and function of muscle myosin

We have studied the primary structures of myosins from chicken muscles in order to clarify the relationship between structure and function of muscle myosin. The primary structures of the various kinds of light chains from chicken muscle myosins have been determined. We also report the primary structure of the 23K fragment of subfragment-1 (S-1) component from the heavy chain of chicken fast skeletal muscle myosin. In addition, antibody was prepared against the 23K fragment. The antibody was found to inhibit the Mg²⁺-ATPase activity and the initial P_i burst of the ATPase in the S-1 component. The antibody suppressed the ATP-induced fluorescence enhancement of S-1, though it did not suppress the binding of ATP to S-1. These results are also discussed.This article was presented during the proceedings of the International Conference on Macromolecular Structure and Function, held at the National Defence Medical College, Tokorozawa, Japan, December 1985.     

Characterization of chicken skeletal muscle myosin light chain kinase. Evidence for muscle-specific isozymes

Myosin light chain kinase purified from chicken white skeletal muscle (Mr = 150,000) was significantly larger than both rabbit skeletal (Mr = 87,000) and chicken gizzard smooth (Mr = 130,000) muscle myosin light chain kinases, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Km and Vmax values with rabbit or chicken skeletal, bovine cardiac, and chicken gizzard smooth muscle myosin P-light chains were very similar for the chicken and rabbit skeletal muscle myosin light chain kinases. In contrast, comparable Km and Vmax data for the chicken gizzard smooth muscle myosin light chain kinase showed that this enzyme was catalytically very different from the two skeletal muscle kinases. Affinity-purified antibodies to rabbit skeletal muscle myosin light chain kinase cross-reacted with chicken skeletal muscle myosin light chain kinase, but the titer of cross-reacting antibodies was approximately 20-fold less than the anti-rabbit skeletal muscle myosin light chain kinase titer. There was no detectable antibody cross-reactivity against chicken gizzard myosin light chain kinase. Proteolytic digestion followed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis or high performance liquid chromatography showed that these enzymes are structurally very different with few, if any, overlapping peptides. These data suggest that, although chicken skeletal muscle myosin light chain kinase is catalytically very similar to rabbit skeletal muscle myosin light chain kinase, the two enzymes have different primary sequences. The two skeletal muscle myosin light chain kinases appear to be more similar to each other than either is to chicken gizzard smooth muscle myosin light chain kinase.     

Melting of myosin rod as revealed by electron microscopy. II. Effects of temperature and pH on length and stability of myosin rod and its fragments

Effects of temperature and pH on intact rabbit and chicken myosin, isolated myosin rods, rabbit subfragment-2 (61 kDa, 53 kDa, and 34 kDa) and chicken light meromyosin (LMM) fragments were tested to induce a phase transition from alpha-helix to coil conformation, within the hinge region. The influence of temperature and pH were studied directly with length determination by electron microscopy. An increase of temperature to 50 degrees C yielded a shortening of 16 nm, 8 to 9 nm and 7 to 11 nm for intact myosin, isolated rods and long S-2 fragments, respectively. The length of the 34 kDa short S-2 and LMM fragments were unchanged. An increase of pH from neutral to pH 8.0 yielded values that were somewhat smaller, e.g. 12 nm, 6 nm and 6 to 8 nm for intact myosin, isolated rods and long S-2 fragments, respectively, whereas the 34 kDa short S-2 LMM fragments were also unaffected. Thus, melting and subsequent shortening is confined to the region between LMM and short S-2 segment, that is the hinge region. Alteration of temperature had a stronger shortening effect than alteration of pH, and shortening of long S-2 was more pronounced under physiological salt conditions as compared with high (0.3 M) salt. The shortening of rods in intact myosin amounted to twice the value observed with isolated rods. The amount of contraction was somewhat smaller in rods than in the 61 kDa and 53 kDa long S-2 fragments.     

Characterization of caldesmon binding to myosin

Caldesmon inhibits the binding of skeletal muscle subfragment-1 (S-1).ATP to actin but enhances the binding of smooth muscle heavy meromyosin (HMM).ATP to actin. This effect results from the direct binding of caldesmon to myosin in the order of affinity: smooth muscle HMM greater than skeletal muscle HMM greater than smooth muscle S-1 greater than skeletal muscle S-1 (Hemric, M. E., and Chalovich, J. M. (1988) J. Biol. Chem. 263, 1878-1885). We now show that the difference between skeletal muscle HMM and S-1 is due to the presence of the S-2 region in HMM and is unrelated to light chain composition or to two-headed versus single-headed binding. Differences between the binding of smooth and skeletal muscle myosin subfragments to actin do not result from the lack of light chain 2 in skeletal muscle S-1. In the presence of ATP, caldesmon binds to smooth muscle myosin filaments with a stoichiometry of 1:1 (K = 1 x 10(6) M-1). Similar results were obtained for the binding of caldesmon to smooth muscle rod as well as the binding of the purified myosin-binding fragment of caldesmon to smooth muscle myosin. The binding of caldesmon to intact myosin is ATP sensitive. The interaction of caldesmon with myosin is apparently specific and sensitive to the structure of both proteins.     

Regulatory and essential light-chain-binding sites in myosin heavy chain subfragment-1 mapped by site-directed mutagenesis

Site-directed mutagenesis of the cloned subfragment-1 (S-1) region of the unc-54 gene, encoding the myosin heavy chain B (MHC B) from Caenorhabditis elegans, has been used to locate binding sites for the regulatory and essential light chains. MHC B S-1 synthesized in Escherichia coli co-migrated with rabbit skeletal muscle myosin S-1 (Mr 90,000), was recognized by anti-nematode myosin antiserum on immunoblots, and specifically bound to 125I-labelled regulatory and essential light chains in a gel overlay assay. Deletion of 102 residues from the C terminus (mutant 655) reduced regulatory and essential light-chain binding to about 30% and 20% of wild-type levels, respectively. Similar reductions in relative binding of the two light chains were seen with mutant 534, in which 38 residues were deleted from the C terminus. Potential binding sites within 75 residues of the C terminus of S-1 were mapped by construction of five other mutant S-1 clones (398, 399, 400, 409 and 411) containing internal deletions of ten to 12 amino acid residues. These showed up to 30% reductions in their ability to bind essential light chains, but did not differ significantly from wild-type in their ability to bind regulatory light chains. Another mutant, 415, containing a deletion of a conserved acidic hexapeptide, E-D-I-R-D-E, showed enhancement of binding of regulatory and essential light chains to 150% and 165% of wild-type levels. Hence, the major binding sites for both light chains are within 38 amino acid residues of the C terminus.     

Tryptophan-130 is the most reactive tryptophan residue in rabbit skeletal myosin subfragment-1

Rabbit skeletal muscle myosin subfragment-1 (S-1) was reacted with dimethyl(2-hydroxy-5-nitrobenzyl)sulfonium bromide (DHNBS) resulting in modification of 0.8 tryptophan residues per S-1. In order to assign the most reactive tryptophan of the 5 S-1 tryptophans, antibodies were raised in rabbits against bovine serum albumin modified with DHNBS. The antibodies reacted with the 27 kDa tryptic fragment of DHNBS-treated S-1, indicating that the reactive tryptophan resides on this domain. The 27 kDa fragment was isolated from DHNBS-treated S-1 and was further cleaved at a single cysteine residue by 2-nitro-5-thiocyanobenzoic acid. This cleavage resulted in two peptides, each of them containing one tryptophan. The antibodies reacted with the smaller peptide consisting of residues 122-204. The only tryptophan residing on this peptide is Trp130, and this is therefore the most reactive tryptophan of S-1.     

The primary structure of skeletal muscle myosin heavy chain: I. Sequence of the amino-terminal 23 kDa fragment

Subfragment-1 was prepared from adult chicken pectoralis myosin by limited digestion with alpha-chymotrypsin, and an amino-terminal 23 kDa fragment of the heavy chain was obtained by digesting the subfragment-1 with trypsin. The 205-residue sequence of the fragment was determined by sequencing its cyanogen bromide, tryptic, and chymotryptic peptides. The amino-terminal alpha-amino group of the fragment was acetylated, and two methylated lysines; epsilon-N-monomethyllysine and epsilon-N-trimethyllysine were recognized at the 35th and 130th positions, respectively, as in rabbit skeletal myosin. Comparing the 205-residue sequence of the skeletal myosin with those of cardiac, and gizzard myosins from chicken, considerable differences are recognized, especially in the amino-terminal region, but strong homologies are observed around the reactive lysine residue, around the epsilon-N-trimethyllysine residue, and around the consensus sequence of GXXGXGKT for nucleotide-binding proteins. On the other hand, only 12 amino acid substitutions are recognized between adult and embryonic skeletal myosins, allowing for the post-translational methylation.     

Amino acid sequence of rabbit skeletal muscle myosin. 50-kDa fragment of the heavy chain

The amino acid sequence of the 50-kDa fragment that is released by limited tryptic digestion of the head portion of rabbit skeletal muscle myosin was determined by analysis and alignment of sets of peptides generated by digestion of the fragment at arginine or methionine residues. This fragment contains residues 205-636 of the myosin heavy chain; among the residues of particular interest in this fragment are N epsilon-trimethyllysine, one of four methyl-amino acids in myosin, and Ser-324, which is photoaffinity labeled by an ATP analogue (Mahmood, R., Elzinga, M., and Yount, R. G. (1989) Biochemistry 28, 3989-3995). Combination of this sequence with those of the 23- and 20-kDa fragments yields an 809-residue sequence that constitutes most of the heavy chain of chymotryptic S-1 of this myosin.     

The primary structure of skeletal muscle myosin heavy chain: IV. Sequence of the rod, and the complete 1,938-residue sequence of the heavy chain

In the preceding paper [Maita, T., Miyanishi, T., Matsuzono, K., Tanioka, Y., & Matsuda, G. (1991) J. Biochem. 110, 68-74], we reported the amino-terminal 837-residue sequence of the heavy chain of adult chicken pectoralis muscle myosin. This paper describes the carboxyl terminal 1,097-residue sequence and the linkage of the two sequences. Rod obtained by digesting myosin filaments with alpha-chymotrypsin was redigested with the protease at high KCl concentration, and two fragments, subfragment-2 and light meromyosin, were isolated and sequenced by conventional methods. The linkage of the two fragments was deduced from the sequence of an overlapping peptide obtained by cleaving the rod with cyanogen bromide. The rod contained 1,039 amino acid residues, but lacked the carboxyl-terminal 58 residues of the heavy chain. A carboxyl-terminal 63-residue peptide obtained by cleaving the whole heavy chain with cyanogen bromide was sequenced. Thus, the carboxyl terminal 1,097-residue sequence of the heavy chain was completed. The linkage of subfragment-1 and the rod was deduced from the sequence of an overlapping peptide between the two which was obtained by cleaving heavy meromyosin with cyanogen bromide. Comparing the sequence of the adult myosin thus determined with that of chicken embryonic myosin reported by Molina et al. [Molina, M.I., Kropp, K.E., Gulick, J., & Robbins, J. (1987) J. Biol. Chem. 262, 6478-6488], we found that the sequence homology is 94%.     

The primary structure of skeletal muscle myosin heavy chain: II. Sequence of the 50 kDa fragment of subfragment-1

The complete amino acid sequence of the 50 kDa fragment of subfragment-1 from adult chicken pectoralis muscle myosin was determined. It contained 431 residues including an epsilon-N-trimethyllysine at position 346. The 431-residue sequence corresponds to the sequence of residues 206 to 639 of chicken embryonic breast muscle myosin heavy chain which was predicted from the nucleotide sequence of the cDNA by Molina et al. [Molina, M. I., Kropp, K.E., Gulick, J., & Robbins, J. (1987) J. Biol. Chem. 262, 6478-6488]. Comparing the two sequences, 23 amino acid substitutions and three deletions/insertions are recognized.     

Amino acid sequence of rabbit ventricular myosin light chain-2: Identity with the slow skeletal muscle isoform

Many studies have established a correlation of differences in the activities of various muscle types with differences in the expression of myosin isoforms. In this paper we report the sequence determination of myosin light chain-2 from rabbit slow skeletal (LC2s) and ventricular (LC2v) nmscles. We sequenced tryptic peptides from LC2v which account for all except a few terminal amino acid residues. The major part (87 residues) of the rabbit LC2s sequence, obtained from tryptic and cyanogen bromide (CNBr) peptides, was found to be identical to rabbit LC2v. Our results provide the first sequence information on LC2s from any species, and lend strong support to the hypothesis that LC2s and LC2v are identical. Comparisons of rabbit LC2v and LC2s with rabbit LC2f (from fast skeletal muscle), and also with chicken LC2f and LC2v, show clearly that LC2s and LC2v from mammalian and avian species are more closely related to each other than they are to LC2f isoforms from the same species.     

Structural characteristics and aggregation of myosin heads in skeletal muscles

Native conformational modifications of rabbit skeletal muscle myosin and its subfragment-1 (S-1) within the temperature range of 0-40 degrees C and irreversible unfolding of these proteins structure at temperatures 40-70 degrees C have been studied by the fluorescence and light scattering methods. The results obtained permit stating that myosin and its active subfragments form associates at the concentrations above 0.3 microM. Hydrophobic interactions between definite sites of S-1 are likely to be primarily responsible for the association. The complex profile of S-1 melting curve at high ionic strength indicates the existence of three structural domains in the heavy chain of the myosin head.