polymerization of actin: v.a new organelle, the actomere, that initiates the assembly of actin filaments in thyone sperm

Between the acrosomal vacuole and the nucleus is a cup of amorphous material (profilactin) which is transformed into filaments during the acrosomal reaction. In the center of this cup in untreated Thyone sperm is a dense material which I refer to as the actomere; it is composed of 20-25 filaments embedded in a dense matrix. To visualize the substructure of the actomere, the profilactin around it must be removed. This is achieved either by demembranating the sperm with Triton X-100 and then raising the pH to 8.0, or by adding ionophores to intact sperm at pH 8.0. Under these conditions, the actomere remains as a unit while the rest of the profilactin is solubilized or polymerized. When demembranated sperm are incubated under conditions in which the actin should polymerize, filaments grow from the end of the actomere: the actomere thus appears to behave as a nucleating body. This observation is strengthened by experiments in which untreated sperm are incubated in seawater or isotonic NaCl at pH 7.0 and the ionophore X537A is added; in this case, only a partial polymerization of the actin occurs and the acrosomal vacuole does not fuse with the cell surface. The actin filaments that do form, however, are attached to the apical end of the actomere. In fact, the elongating filaments push their way into and frequently through the acrosomal vacuole. Thus, it appears that the sperm organizes the actin filaments by controlling their nucleation. My model is that the cell controls the amount of unbound actin such that it is slightly above the critical concentration for polymerization. Then, spontaneous nucleation is unfavored and polymerization would proceed from existing nuclei such as the actomere.     

Polymerization of actin. V. A new organelle, the actomere, that initates the assembly of actin filaments in Thyone sperm.

Between the acrosomal vacuole and the nucleus is a cup of amorphous material (profilactin) which is transformed into filaments during the acrosomal reaction. In the center of this cup in untreated Thyone sperm is a dense material which I refer to as the actomere; it is composed of 20-25 filaments embedded in a dense matrix. To visualize the substructure of the actomere, the profilactin around it must be removed. This is achieved either by demembranating the sperm with Triton X-100 and then raising the pH to 8.0, or by adding inophores to intact sperm at pH 8.0. Under these conditions, the actomere remains as a unit while the rest of the profilactin is solubilized or polymerized. When demembranated sperm are incubated under conditions in which the actin should polymerize, filaments grow from the end of the actomere: the actomere thus appears to behave as a nucleating body. This observation is strengthened by experiments in which untreated sperm are incubated in seawater or isotonic NaCl at pH 7.0 and the ionophore X537A is added; in this case, only a partial polymerization of the actin occurs and the acrosomal vacuole does not fuse with the cell surface. The actin filaments that do form, however, are attached to the apical end of the actomere. In fact, the elongating filaments push their way into and frequently through the acrosomal vacuole. Thus, it appears that the sperm organizes the actin filaments by controlling their nucleation. My model is that the cell controls the ammount of unbound actin such that it is slightly above the critical concentration for polymerization. Then, spontaneous nucleation is unfavored and polymerization would proceed from existing nuclei such as the actomer.     

The polymerization of actin. III. Aggregates of nonfilamentous actin and its associated proteins: a storage form of actin

When echinoderm sperm are treated with the detergent Triton X-100 at pH 6.4 in 10 mM phosphate buffer, the membranes are solubilized, but the actin which is located in the periacrosomal region remains as a phase-dense cup. These cups can be isolated free from the flagella and chromatin and can be solubilized by increasing the pH to 8.0 and by changing the ionic strength and type of buffer used. Since the actin does not exist in the "F" state in unreacted sperm, and since the actin remains as a unit that does not diffuse away, it must be present in the mature sperm in a bound or storage state. The actin is, in fact, associated with a pair of proteins whose mol wt are 250,000 and 230,000. When the isolated cups are digested with trypsin, these high molecular weight proteins are digested, thereby liberating the actin. The actin will polymerize if heavy meromyosin or subfragment 1 is added to a preparation of isolated cups. Evidence is presented that this pair of high molecular weight proteins is similar in molecular weight and properties to erythrocyte spectrin. Attempts at transforming the storage form of actin in the cup into filaments were only moderately successful. The best conditions for filament formation involve incubating the cup in ATP and divalent salts. Careful examination of these cups reveals that the actin polymerized preferentially on either end of oriented filaments that already exist in the cup, indicating that self-nucleation is inefficacious. I conclude that the actin can exist in the storage form by its association with spectrin-like molecules and that the actin in this state polymerizes preferentially onto existing filaments.     

Organization of actin networks in intact filopodia

Filopodia are finger-like extensions of the cell surface that are involved in sensing the environment, in attachment of particles for phagocytosis, in anchorage of cells on a substratum, and in the response to chemoattractants or other guidance cues. Filopodia present an excellent model for actin-driven membrane protrusion. They grow at their tips by the assembly of actin and are stabilized along their length by a core of bundled actin filaments. To visualize actin networks in their native membrane-anchored state, filopodia of Dictyostelium cells were subjected to cryo-electron tomography. At the site of actin polymerization, a peculiar structure, the "terminal cone," is built of short filaments fixed with their distal end to the filopod's tip and with their proximal end to the flank of the filopod. The backbone of the filopodia consists of actin filaments that are shorter than the entire filopod and aligned in parallel or obliquely to the filopod's axis. We hypothesize that growth of the highly dynamic filopodia of Dictyostelium is accompanied by repetitive nucleation of actin polymerization at the filopod tip, followed by the rearrangement of filaments within the shaft.     

Toxofilin, a novel actin-binding protein from Toxoplasma gondii, sequesters actin monomers and caps actin filaments

Toxoplasma gondii relies on its actin cytoskeleton to glide and enter its host cell. However, T. gondii tachyzoites are known to display a strikingly low amount of actin filaments, which suggests that sequestration of actin monomers could play a key role in parasite actin dynamics. We isolated a 27-kDa tachyzoite protein on the basis of its ability to bind muscle G-actin and demonstrated that it interacts with parasite G-actin. Cloning and sequence analysis of the gene coding for this protein, which we named Toxofilin, showed that it is a novel actin-binding protein. In in vitro assays, Toxofilin not only bound to G-actin and inhibited actin polymerization as an actin-sequestering protein but also slowed down F-actin disassembly through a filament end capping activity. In addition, when green fluorescent protein-tagged Toxofilin was overexpressed in mammalian nonmuscle cells, the dynamics of actin stress fibers was drastically impaired, whereas green fluorescent protein-Toxofilin copurified with G-actin. Finally, in motile parasites, during gliding or host cell entry, Toxofilin was localized in the entire cytoplasm, including the rear end of the parasite, whereas in intracellular tachyzoites, especially before they exit from the parasitophorous vacuole of their host cell, Toxofilin was found to be restricted to the apical end.     

Visualization and force measurement of branching by Arp2/3 complex and N-WASP in actin filament

To determine whether the Arp2/3 complex activated by N-WASP (VCA) branches actin filaments at the side (side branching), or at the barbed (B-)end (end branching) of the mother filaments, we have directly observed the branching process of actin filaments and examined single-molecule unbinding under optical microscope. We found that side branching was predominant, though not exclusive. At the initial stage of polymerization, the branching at the B-end occurred and subsequently the side branching started to occur. In either type of branching, the mother and daughter filaments elongated at nearly the same rate (growing type). Independently of the stage of polymerization, branching due to the direct coupling of filaments with an acute angle to the mother filaments (a coupling type) occurred. Phalloidin suppressed the growing type of branching but not the coupling type, implying that actin monomers are required for the former but not the latter. We found, by single molecule measurements using optical tweezers, that the Arp2/3 complex attaches to the side of actin filaments and the N-WASP appears to detach from the actin-Arp2/3 complex at 6-7 pN.     

Formation of actin filament bundles in the ring canals of developing Drosophila follicles

Growing the intracellular bridges that connect nurse cells with each o ther and to the developing oocyte is vital for egg development. These ring canals increase from 0.5 microns in diameter at stage 2 to 10 microns in diameter at stage 11. Thin sections cut horizontally as you would cut a bagel, show that there is a layer of circumferentially oriented actin filaments attached to the plasma membrane at the periphery of each canal. By decoration with subfragment 1 of myosin we find actin filaments of mixed polarities in the ring such as found in the "contractile ring" formed during cytokinesis. In vertical sections through the canal the actin filaments appear as dense dots. At stage 2 there are 82 actin filaments in the ring, by stage 6 there are 717 and by stage 10 there are 726. Taking into account the diameter, this indicates that there is 170 microns of actin filaments/canal at stage 2 (pi x 0.5 microns x 82), 14,000 microns at stage 9 and approximately 23,000 microns at stage 11 or one inch of actin filament! The density of actin filaments remains unchanged throughout development. What is particularly striking is that by stages 4-5, the ring of actin filaments has achieved its maximum thickness, even though the diameter has not yet increased significantly. Thereafter, the diameter increases. Throughout development, stages 2-11, the canal length also increases. Although the density (number of actin filaments/micron2) through a canal remains constant from stage 5 on, the actin filaments appear as a net of interconnected bundles. Further information on this net of bundles comes from studying mutant animals that lack kelch, a protein located in the ring canal that has homology to the actin binding protein, scruin. In this mutant, the actin filaments form normally but individual bundles that comprise the fibers of the net are not bound tightly together. Some bundles enter into the ring canal lumen but do not completely occlude the lumen. all these observations lay the groundwork for our understanding of how a noncontractile ring increases in thickness, diameter, and length during development.     

The organization and regulation of the macrophage actin skeleton

To move, leukocytes extend portions of their cortical cytoplasm as pseudopods. These pseudopods are filled with a three-dimensional actin filament skeleton, the reversible assembly of which in response to receptor stimulation is thought to play a major role in providing the mechanical force for these protrusive movements. The organization of this actin skeleton occurs at different levels within the cell, and a number of macrophage proteins have been isolated and shown to affect the architecture, assembly, stability, and length of actin filaments in vitro. The architecture of cytoplasmic actin is regulated by proteins that cross-link filaments in higher-order structures. Actin-binding protein plays a major role in defining network structure by cross-linking actin filaments into orthogonal networks. Gelsolin may have a central role in regulating network structure. It binds to the sides of actin filaments and severs them, and binds the "barbed" filament end, thereby blocking monomer addition at this end. Gelsolin is activated to bind actin filaments by microM calcium. Dissociation of gelsolin bound on filament ends occurs in the presence of the polyphosphoinositides, PIP and PIP2. Calcium and PIP2 have been shown to be intracellular messengers of cell stimulation.     

Formation of filopodia in coelomocytes: localization of fascin, a 58,000 dalton actin cross-linking protein.

Echinoderm coelomocytes or phagocytes purified in the petaloid stage will attach to a glass substrate and form large circumferential lamellIpodia. Hypotonic shock will induce quantitative transformation to a filopodial form. Differentiation of the peripheral cytoplasm begins at the cell edge, when phase dense rods composed of actin filaments start to form. These structures, which eventually form the cores of filopodia, continue to grow, lengthen and extend deeper into the cytoplasm. In the final stage, the plasma membrane retracts down around a core to form a filopodium. Antibody against a 58,000 dalton protein isolated from sea urchin egg actin gels has been used to study a rather striking redistribution of this protein in the peripheral cytoplasm of the coelomocyte during the transformation sequence. This protein is known to organize actin filaments in vitro into linear paracrystalline arrays with a distinct 11 nm banding pattern by forming cross-links between adjacent actin filaments. In the early stage of the transformation, indirect immunofluorescence indicates a random distribution of this protein in the circumferential lamellipodia. Organization is first seen at the cell edge, where fluorescent rods coincident with the phase-dense structures start to form. These rods lengthen, extend deeper into the cytoplasm and become more intensely fluorescent. After membrane retraction, cells with individual, intensely stained filopodia are visible. The known chemistry of the actin cross-linking protein (M_r = 58,000) and its redistribution during the transformation sequence are consistent with the idea that this protein functions to organize F actin into filopodial cores by cross-linking adjacent actin filaments. We have named this protein “fascin,” because it organizes actin filaments, both in vivo and in vitro, into linear arrays or fascicles. Antibody staining shows a second population of these actin cross-linking molecules localized in the perinuclear cytoplasm. In this region, fascin appears to function to maintain a stable circumnuclear cage structure which is part of the coelomocyte cytoskeleton.     

Exchange of actin subunits at the leading edge of living fibroblasts: possible role of treadmilling

Previous observations indicated that the lamellipodium ("leading edge") of fibroblasts contains a dense meshwork, as well as numerous bundles (microspikes) of actin filaments. Most, if not all, of the filaments have a uniform polarity, with the "barbed" end associated with the membrane. I investigated whether and how actin subunits exchange in this region by microinjecting living gerbil fibroma cells (IMR-33) with actin that had been labeled with iodoacetamidotetramethylrhodamine. After incorporation of the labeled actin into the lamellipodium, I used a laser microbeam to photobleach a 3-4-micron region at and surrounding a microspike, without disrupting the integrity of the structure. I then recorded the pattern of fluorescence recovery and analyzed it using a combination of TV image intensification and digital image processing techniques. Fluorescence recovery was first detected near the edge of the cell and then moved toward the cell's center at a constant rate of 0.79 +/- 0.31 micron/min. When only part of the lamellipodium near the edge of the cell was photobleached, the bleached spot also moved toward the cell's center and through an area unbleached by the laser beam. These results indicated that steady state incorporation of actin subunits occurred predominantly at the membrane-associated end of actin filaments, and that actin subunits in the lamellipodium underwent a constant movement toward the center of the cell. I suggest that treadmilling, possibly in combination with other molecular interactions, may provide an effective mechanism for the movement of actin subunits and the protrusion of cytoplasm in the lamellipodium of fibroblasts.     

Uncoupling actin filament fragmentation by cofilin from increased subunit turnover

The actin depolymerizing factor (ADF)/cofilin family of proteins interact with actin monomers and filaments in a pH-sensitive manner. When ADF/cofilin binds F-actin it induces a change in the helical twist and fragmentation; it also accelerates the dissociation of subunits from the pointed ends of filaments, thereby increasing treadmilling or depolymerization. Using site-directed mutagenesis we characterized the two actin-binding sites on human cofilin. One target site was chosen because we previously showed that the villin head piece competes with ADF for binding to F-actin. Limited sequence homology between ADF/cofilin and the part of the villin headpiece essential for actin binding suggested an actin-binding site on cofilin involving a structural loop at the opposite end of the molecule to the alpha-helix already implicated in actin binding. Binding through the alpha-helix is primarily to monomeric actin, whereas the loop region is specifically involved in filament association. We have characterized the actin binding properties of each site independently of the other. Mutation of a single lysine residue in the loop region abolishes binding to filaments, but not to monomers. Using the mutation analogous to the phosphorylated form of cofilin (S3D), we show that filament binding is inhibited at physiological ionic strength but not under low salt conditions. At low ionic strength, this mutant induces both the twist change and fragmentation characteristic of wild-type cofilin, but does not activate subunit dissociation. The results suggest a two-site binding to filaments, initiated by association through the loop site, followed by interaction with the adjacent subunit through the "helix" site at the opposite end of the molecule. Together, these interactions induce twist and fragmentation of filaments, but the twist change itself is not responsible for the enhanced rate of actin subunit release from filaments.     

Polymerization of actin. VI. The polarity of the actin filaments in the acrosomal process and how it might be determined

The polarity of the actin filaments which assemble from the nucleating body or actomere of Thyone and Pisaster sperm was determined using myosin subfragment 1 decoration. The polarity was found to be unidirectional with the arrowheads pointing towards the cell center. When polymerization is induced at low temperature with concentrations of actin near the critical concentration for polymerization, elongation of filaments occurs preferentially off the apical end. If the sperm are induced to undergo the acrosomal reaction with an ionophore, the polarity of the actin filaments attached to the actomere is the same as that already described, but the filaments which polymerize parallel to, but peripheral to, those extending from the actomere are randomly polarized. These randomly polarized filaments appear to result from spontaneous nucleation. When sperm are induced to undergo the acrosomal reaction with eggs, the polarity of the actin filaments is also unidirectional with the arrowheads pointing towards the cell center. From these results we conclude: (a) that the actomere, by nucleating the polymerization of actin filaments, controls the polarity of the actin filaments in the acrosomal process, (b) that the actomere recognizes a surface of the actin monomer that is different from that surface recognized by the dense material attached to membranes, and (c) that egg myosin could not act to pull the sperm into the egg. Included is a discussion of how the observation that monomers add largely to one end of a decorated filament in vitro relates to these in vivo observations.     

Fertilization in Torenia fournieri: Actin organization and nuclear behavior in the central cell and primary endosperm

Studies of the living embryo sacs of Torenia fournieri reveal that the actin cytoskeleton undergoes dramatic changes that correlate with nuclear migration within the central cell and the primary endosperm. Before pollination, actin filaments appear as short bundles randomly distributed in the cortex of the central cell. Two days after anthesis, they become organized into a distinct actin network. At this stage the secondary nucleus, which is located in the central region of the central cell, possesses an associated array of short actin filaments. Soon after pollination, the actin filaments become fragmented in the micropylar end and the secondary nucleus is located next to the egg apparatus. After fertilization, the primary endosperm nucleus moves away from the egg cell and actin filaments reorganize into a prominent network in the cytoplasm of the primary endosperm. Disruption of the actin cytoskeleton with latrunculin A and cytochalasin B indicates that actin is involved in the migration of the nucleus     

Fertilization in Torenia fournieri: Actin organization and nuclear behavior in the central cell and primary endosperm

Studies of the living embryo sacs of Torenia fournieri reveal that the actin cytoskeleton undergoes dramatic changes that correlate with nuclear migration within the central cell and the primary endosperm. Before pollination, actin filaments appear as short bundles randomly distributed in the cortex of the central cell. Two days after anthesis, they become organized into a distinct actin network. At this stage the secondary nucleus, which is located in the central region of the central cell, possesses an associated array of short actin filaments. Soon after pollination, the actin filaments become fragmented in the micropylar end and the secondary nucleus is located next to the egg apparatus. After fertilization, the primary endosperm nucleus moves away from the egg cell and actin filaments reorganize into a prominent network in the cytoplasm of the primary endosperm. Disruption of the actin cytoskeleton with latrunculin A and cytochalasin B indicates that actin is involved in the migration of the nucleus in the central cell. Our data also suggest that the dynamics of actin cytoskeleton may be responsible for the reorganization of the central cell and primary endosperm cytoplasm during fertilization.     

Three-dimensional organization and dynamic changes of the actin cytoskeleton in embryo sacs ofZea mays andTorenia fournieri

Actin organization was observed in m-maleimidobenzoic acid N-hydroxysuccinimide ester(MBS)-treated maize embryo sacs by confocal laser scanning microscopy. The results revealed that dynamic changes of actin occur not only in the degenerating synergid, but also in the egg during fertilization. The actin filaments distribute randomly in the chalazal part of the synergid before fertilization; they later become organized into numerous aggregates in the chalazal end after pollination. The accumulation of actin at this region is intensified after the pollen tube discharges its contents. Concurrently, actin patches have also been found in the cytoplasm of the egg cell and later they accumulate in the cortical region. To compare with MBS-treated maize embryo sacs, we have performed phalloidin microinjection to label the actin cytoskeleton in living embryo sacs of Torenia fournieri. The results have extended the previous observations on the three-dimensional organization of the actin arrays in the cells of the female germ unit and confirm the occurrence of the actin coronas in the embryo sac during fertilization. We have found that there is an actin cap occurring near the filiform apparatus after anthesis. In addition, phalloidin microinjection into the Torenia embryo sac has proved the presence of intercellular actin between the cells of the female germ unit and thus confirms the occurrence of the actin coronas in the embryo sac during fertilization. Moreover, actin dynamic changes also take place in the egg and the central cell, accomplished with the interaction between the male and female gametes. The actin filaments initially organize into a distinct actin network in the cortex of the central cell after anthesis; they become fragmented in the micropylar end of the cell after pollination. Similar to maize, actin patches have also been observed in the egg cortex after pollination. This is the first report of actin dynamics in the living embryo sac. The results suggest that the actin cytoskeleton may play an essential role in the reception of the pollen tube, migration of the male gametes, and even gametic fusion.     

Dynamics of actin filaments during tension-dependent formation of actin bundles

The actin cytoskeleton stress fiber is an actomyosin-based contractile structure seen as a bundle of actin filaments. Although tension development in a cell is believed to regulate stress fiber formation, little is known for the underlying biophysical mechanisms. To address this question, we examined the effects of tension on the behaviors of individual actin filaments during stress fiber (actin bundle) formation using cytosol-free semi-intact fibroblast cells that were pre-treated with the Rho kinase inhibitor Y-27632 to disassemble stress fibers into a meshwork of actin filaments. These filaments were sparsely labeled with quantum dots for live tracking of their motions. When ATP and Ca(2+) were applied to the semi-intact cells to generate actomyosin-based forces, actin meshwork in the protruded lamellae was dragged toward the cell body, while the periphery of the meshwork remained in the original region, indicating that centripetally directed tension developed in the meshwork. Then the individual actin filaments in the meshwork moved towards the cell body accompanied with sudden changes in the direction of their movements, finally forming actin bundles along the direction of tension. Dragging the meshwork by externally applied mechanical forces also exerted essentially the same effects. These results suggest the existence of tension-dependent remodeling of cross-links within the meshwork during the rearrangement of actin filaments, thus demonstrating that tension is a key player to regulate the dynamics of individual actin filaments that leads to actin bundle formation.     

Adsorption of actin at the air-water interface: a monolayer study

The intrinsic surface activity of the contractile protein actin has been determined from surface tension measurements using the Wilhelmy hanging-plate method. Actin, a very soluble protein, moves from the subphase to the air-water interface to make a film. In the absence of magnesium, actin is monomeric and is known as G-actin. During the compression the monomers change their conformation or orientation at the interface and they are then pushed reversibly into the subphase upon further compression. No collapse occurs. Actin monomers in the presence of magnesium become activated; at concentrations greater than some critical value, actin polymerizes to form filaments of F-actin. The actin filaments have a higher surface activity than the actin monomers either because they are more hydrophobic or because F-actin, a rigid polymer, is much more efficient at creating excluded volume. The actin filaments then form a rigid film at the interface that collapses when the surface area is decreased. At less than the critical concentration, the actin monomers are present in the subphase in their activated form. However, their concentration increases at the interface during film compression until the critical concentration is reached. The surface pressure isotherm in this case has the characteristics of a G-actin film at the beginning of the compression and of an F-actin film at the end of the compression process.     

Dynamics of vacuoles and actin filaments in guard cells and their roles in stomatal movement

Vacuoles and actin filaments are important cytoarchitectures involved in guard cell function. The changes in the morphology and number of vacuoles and the regulation of ion channel activity in tonoplast of guard cells are essential for stomatal movement. A number of studies have investigated the regulation of ion channels in animal and plant cells; however, little is known about the regulating mechanism for vacuolar dynamics in stomatal movement. Actin filaments of guard cells are remodelling with the changes in the stomatal aperture; however, the dynamic functions of actin filaments in stomatal movement remain elusive. In this paper, we summarize the recent developments in the understanding of the dynamics of actin filaments and vacuoles of guard cells during stomatal movement. All relevant studies suggest that actin filaments might be involved in stomatal movement by regulating vacuolar dynamics and the ion channels in tonoplast. The future study could be focused on the linker protein mediating the interaction between actin filaments and tonoplast, which will provide insights into the interactive function of actin and vacuole in stomatal movement regulation.     

Actin filaments elongate from their membrane-associated ends

In limulus sperm an actin filament bundle 55 mum in length extends from the acrosomal vacuole membrane through a canal in the nucleus and then coils in a regular fashion around the base of the nucleus. The bundle expands systematically from 15 filaments near the acrosomal vacuole to 85 filaments at the basal end. Thin sections of sperm fixed during stages in spermatid maturation reveal that the filament bundle begins to assemble on dense material attached to the acrosomal vacuole membrane. In micrographs fo these early stages in maturation, short bundles are seen extending posteriorly from the dense material. The significance is that these short, developing bundles have about 85 filaments, suggesting that the 85-filament end of the bundle is assembled first. By using filament bundles isolated and incubated in vitro with G actin from muscle, we can determine the end “preferred” for addition of actin monomers during polymerization. The end that would be associated with the acrosomal vacuole membrane, a membrane destined to be continuous with the plasma membrane, is preferred about 10 times over the other, thicker end. Decoration of the newly polymerized portions of the filament bundle with subfragment 1 of myosin reveals that the arrowheads point away from the acrosomal vacuole membrane, as is true of other actin filament bundles attached to membranes. From these observations we conclude that the bundle is nucleated from the dense material associated with the acrosomal vacuole and that monomers are added to the membrane-associated end. As monomers are added at the dense material, the thick first-made end of the filament bundle is pushed down through the nucleus where, upon reaching the base of the nucleus, it coils up. Tapering is brought about by the capping of the peripheral filaments in the bundle.     

ADF/cofilin use an intrinsic mode of F-actin instability to disrupt actin filaments

Proteins in the ADF/cofilin (AC) family are essential for rapid rearrangements of cellular actin structures. They have been shown to be active in both the severing and depolymerization of actin filaments in vitro, but the detailed mechanism of action is not known. Under in vitro conditions, subunits in the actin filament can treadmill; with the hydrolysis of ATP driving the addition of subunits at one end of the filament and loss of subunits from the opposite end. We have used electron microscopy and image analysis to show that AC molecules effectively disrupt one of the longitudinal contacts between protomers within one helical strand of F-actin. We show that in the absence of any AC proteins, this same longitudinal contact between actin protomers is disrupted at the depolymerizing (pointed) end of actin filaments but is prominent at the polymerizing (barbed) end. We suggest that AC proteins use an intrinsic mechanism of F-actin's internal instability to depolymerize/sever actin filaments in the cell.