The functional origin of bacteriophage f1 DNA replication. Its signals and domains

The origin of DNA replication of bacteriophage f1 functions as a signal, not only for initiation of viral strand synthesis, but also for its termination. Viral (plus) strand synthesis initiates and terminates at a specific site (plus origin) that is recognized and nicked by the viral gene II protein. Mutational analysis of the 5' side (upstream) of the origin of plus strand replication of phage f1 led us to postulate the existence of a set of overlapping functional domains. These included ones for strand nicking, and initiation and termination of DNA synthesis. Mutational analysis of the 3' side (downstream) of the origin has verified the existence of these domains and determined their extent. The results indicate that the f1 "functional origin" can be divided into two domains: (1) a "core region", about 40 nucleotides long, that is absolutely required for plus strand synthesis and contains three distinct but partially overlapping signals, (a) the gene II protein recognition sequence, which is necessary both for plus strand initiation and termination, (b) the termination signal, which extends for eight more nucleotides on the 5' side of the gene II protein recognition sequence, (c) the initiation signal that extends for about ten more nucleotides on the 3' side of the gene II protein recognition sequence; (2) a "secondary region", 100 nucleotides long, required exclusively for plus strand initiation. Disruption of the secondary region does not completely abolish the functionality of the f1 origin but does drastically reduce it (1% residual biological activity). We discuss a possible explanation of the fact that this region can be interrupted (e.g. f1, M13 cloning vectors) by large insertions of foreign DNA without significantly affecting replication.     

A homogeneous nucleic acid hybridization assay based on strand displacement.

A homogeneous nucleic acid hybridization assay which is conducted in solution and requires no separation steps is described. The assay is based on the concept of strand displacement. In the strand displacement assay, an RNA "signal strand" is hybridized within a larger DNA strand termed the "probe strand", which is, in turn, complementary to the target nucleic acid of interest. Hybridization of the target nucleic acid with the probe strand ultimately results in displacement of the RNA signal strand. Strand displacement, therefore, causes conversion of the RNA from double to single-stranded form. The single-strand specificity of polynucleotide phosphorylase (EC 2.7.7.8) allows discrimination between double-helical and single-stranded forms of the RNA signal strand. As displacement proceeds, free RNA signal strands are preferentially phosphorolyzed to component nucleoside diphosphates, including adenosine diphosphate. The latter nucleotide is converted to ATP by pyruvate kinase(EC 2.7.1.40). Luciferase catalyzed bioluminescence is employed to measure the ATP generated as a result of strand displacement.     

Effects in live cells of a c-myc anti-gene PNA linked to a nuclear localization signal

Peptide nucleic acids (PNA) are synthetic homologs of nucleic acids in which the phosphate-sugar polynucleotide backbone is replaced by a flexible polyamide. In this study, a PNA construct was employed as an anti-gene agent in intact cells in culture. The cell lines studied were derived from Burkitt's lymphomas (BL) that presented a translocated and hyperexpressed c-myc oncogene. A 17-mer anti-myc PNA, complementary to a unique sequence located at the beginning of the second exon of the oncogene, and was covalently linked at its N terminus to a nuclear localization signal (NLS) (PNA-myc(wt)-NLS). When BL cells were exposed to PNA-myc(wt)-NLS, the anti-gene construct was localized predominantly in the cell nuclei and a rapid consequent downregulation of c-myc expression occurred. Under these conditions, both completion of a productive cell cycle and apoptosis were inhibited.     

Multilayer checkpoints for microRNA authenticity during RISC assembly

MicroRNAs (miRNAs) function through the RNA-induced silencing complex (RISC), which contains an Argonaute (Ago) protein at the core. RISC assembly follows a two-step pathway: miRNA/miRNA* duplex loading into Ago, and separation of the two strands within Ago. Here we show that the 5' phosphate of the miRNA strand is essential for duplex loading into Ago, whereas the preferred 5' nucleotide of the miRNA strand and the base-pairing status in the seed region and the middle of the 3' region function as additive anchors to Ago. Consequently, the miRNA authenticity is inspected at multiple steps during RISC assembly.     

Insulin-binding peptide. Design and characterization

The design and characterization of a six-amino acid-containing peptide that binds insulin is described. The amino acid sequence of the insulin-binding peptide (IBP) was determined from the strand of DNA complementary to the strand of DNA coding for the insulin molecule in the domain of the insulin monomer believed to interact with the insulin receptor. The IBP (Cys-Val-Glu-Glu-Ala-Ser) binds specifically to insulin in a saturable manner with a Kd of 3 nM. This binding process is time dependent and slightly temperature dependent, and the peptide appears to interact with insulin near the carboxyl terminus of the B-chain of insulin. Incubation of insulin with the peptide decreases insulin binding to the insulin receptor by 50%, with no effect on the affinity of insulin for the receptor and no effect on cellular insulin-stimulated deoxyglucose uptake. A polyclonal antibody produced against the IBP will inhibit specific insulin binding to intact cells by approximately 50%, with no effects on insulin-stimulated glucose uptake. From this data, we suggest that there are at least two domains of the insulin molecule through which it interacts with its receptor, the "binding region" of insulin, which is the domain blocked by the IBP, and the "message region" of insulin, through which insulin not only binds to the receptor, but also generates the cellular signal.     

Initiation signals for complementary strand DNA synthesis in the region of the replication origin of the Escherichia coli chromosome.

We have used an in vivo plasmid-phi X174 packaging system to detect replication initiation signals in the region of the replication origin (oriC) of the Escherichia coli chromosome. The results obtained are summarized as follows: (i) Neither within nor close to oriC effective signals for initiating complementary strand synthesis could be detected. We conclude that initiation mechanisms for leading and lagging strand synthesis at oriC are not identical to any known priming mechanism of DNA synthesis. (ii) At least five signals that can function as complementary strand origins on ss-plasmid DNA are located in a region about 2000-3300 base pairs away from oriC in the clockwise direction on the chromosome. We suggest that these signals are protein n' like recognition sequences since they are dependent for their activity on dnaB protein and show sequence similarities to other putative n' recognition sequences. Surprisingly, some of the signals are located on the template for leading strand synthesis.     

The functional efficiency of a mammalian signal peptide is directly related to its hydrophobicity

We have previously shown that the signal sequence of the Saccharomyces cerevisiae vacuolar protein carboxypeptidase Y (CPY) does not function in mammalian cells unless a glycine residue in the central core is replaced by leucine. Additional mutants were constructed to investigate the features of this hydrophobic core (h) region that are important for signal sequence function in mammalian cells. We find that the degree of hydrophobicity of the h region of any particular mutant signal is directly related to the efficiency with which it directs the translocation of CPY. A minimal h region in a functional signal appears to consist of five hydrophobic residues interrupted by 1 glycine. Analysis of potential secondary structures suggests that a functional mutant signal is more likely than the nonfunctional CPY signal to adopt either a beta strand or an alpha-helical conformation.     

植物萜类合成酶3-羟基-3-甲基戊二酰辅酶A还原酶的生物信息学分析

采用生物信息学的方法和工具对已在GenBank上注册的橡胶、烟草、辣椒、穿心莲等植物的萜类合成酶3-羟基-3-甲基戊二酰辅酶A还原酶的核酸及氨基酸序列进行分析,并对其组成成分、信号肽、跨膜拓朴结构域、疏水性/亲水性、蛋白质二级及三级结构、分子系统进化关系等进行预测和推断。结果表明该类酶基因的全长包括5′、3′非翻译区和一个开放阅读框,无信号肽,是一个跨膜的亲水性蛋白,包括两个功能HMG-CoA结合motif及两个功能NADPH结合motif,α-螺旋和不规则盘绕是蛋白质二级结构最大量的结构元件,β-转角和延伸链散布于整个蛋白质中,蛋白质的功能域在空间布局上折叠成“V”形,“V”形的两臂由螺旋状的N结构域和S结构域构成,中间部分由L结构域构成。     

RecA protein reinitiates strand exchange on isolated protein-free DNA intermediates. An ADP-resistant process

Efficient homologous pairing de novo of linear duplex DNA with a circular single strand (plus strand) coated with RecA protein requires saturation and extension of the single strand by the protein. However, strand exchange, the transfer of a strand from duplex DNA to the nucleoprotein filament, which follows homologous pairing, does not require the stable binding of RecA protein to single-stranded DNA. When RecA protein was added back to isolated protein-free DNA intermediates in the presence of sufficient ADP to inhibit strongly the binding of RecA protein to single-stranded DNA, strand exchange nonetheless resumed at the original rate and went to completion. Characterization of the protein-free DNA intermediate suggested that it has a special site or region to which RecA protein binds. Part of the nascent displaced plus strand of the deproteinized intermediate was unavailable as a cofactor for the ATPase activity of RecA protein, and about 30% resisted digestion by P1 endonuclease, which acts preferentially on single-stranded DNA. At the completion of strand exchange, when the distal 5' end of the linear minus strand had been fully incorporated into heteroduplex DNA, a nucleoprotein complex remained that contained all three strands of DNA from which the nascent displaced strand dissociated only over the next 50 to 60 minutes. Deproteinization of this intermediate yielded a complex that also contained three strands of DNA in which the nascent displaced strand was partially resistant to both Escherichia coli exonuclease I and P1 endonuclease. The deproteinized complex showed a broad melting transition between 37 degrees C and temperatures high enough to melt duplex DNA. These results show that strand exchange can be subdivided into two stages: (1) the exchange of base-pairs, which creates a new heteroduplex pair in place of a parental pair; and (2) strand separation, which is the physical displacement of the unpaired strand from the nucleoprotein filament. Between the creation of new heteroduplex DNA and the eventual separation of a third strand, there exists an unusual DNA intermediate that may contain three-stranded regions of natural DNA that are several thousand bases in length.     

DNA biosensors that reason

Despite the many designs of devices operating with the DNA strand displacement, surprisingly none is explicitly devoted to the implementation of logical deductions. The present article introduces a new model of biosensor device that uses nucleic acid strands to encode simple rules such as "IF DNA_strand(1) is present THEN disease(A)" or "IF DNA_strand(1) AND DNA_strand(2) are present THEN disease(B)". Taking advantage of the strand displacement operation, our model makes these simple rules interact with input signals (either DNA or any type of RNA) to generate an output signal (in the form of nucleotide strands). This output signal represents a diagnosis, which either can be measured using FRET techniques, cascaded as the input of another logical deduction with different rules, or even be a drug that is administered in response to a set of symptoms. The encoding introduces an implicit error cancellation mechanism, which increases the system scalability enabling longer inference cascades with a bounded and controllable signal-noise relation. It also allows the same rule to be used in forward inference or backward inference, providing the option of validly outputting negated propositions (e.g. "diagnosis A excluded"). The models presented in this paper can be used to implement smart logical DNA devices that perform genetic diagnosis in vitro.     

Drosophila mitochondrial DNA: a novel gene order

Part of the replication origin-containing A+T-rich region of the Drosophila yakuba mtDNA molecule and segments on either side of this region have been sequenced, and the genes within them identified. The data confirm that the small and large rRNA genes lie in tandem adjacent to that side of the A+T-rich region which is replicated first, and establish that a tRNAval gene lies between the two rRNA genes and that URF1 follows the large rRNA gene. The data further establish that the genes for tRNAile, tRNAgln, tRNAf-met and URF2 lie in the order given, on the opposite side of the A+T-rich region to the rRNA genes and, except for tRNAgln, are contained in the opposite strand to the rRNA, tRNAval and URF1 genes. This is in contrast to mammalian mtDNAs where all of these genes are located on the side of the replication origin which is replicated last, within the order tRNAphe, small (12S) rRNA, tRNAval, large (16S) rRNA, tRNAleu, URF1, tRNAile, tRNAgln, tRNAf-met and URF2, and, except tRNAgln, are all contained in the same (H) strand. In D. yakuba URF1 and URF2, the triplet AGA appears to specify an amino acid, which is again different from the situation found in mammalian mtDNAs, where AGA is used only as a rare termination codon.     

Reactions between half- and full-FLP recombination target sites. A model system for analyzing early steps in FLP protein-mediated site-specific recombination.

The FLP recombination target (FRT) can be cut in half so that only one FLP protein binding site is present (a "half site"). FLP protein binds the half sites and joins them into dimeric, asymmetric head-to-head complexes held together chiefly by strong noncovalent interactions. These complexes react with full (normal) FRT sites to generate a variety of products. Analysis of these DNA species reveals that the reaction follows a well-defined reaction pathway that generally parallels the normal reaction pathway. The system is useful in analyzing early steps in recombination, since the identity of the products in a given recombination event unambiguously pinpoints the order in which the cleavage and strand exchange reactions occur. Two conclusions are derived from the present study: (i) Formation of the dimeric head-to-head complex of half sites is a prerequisite to further steps in recombination. (ii) The identity of the base pairs at positions 6 and -6 within the FRT site has a subtle effect in directing the first strand exchange event in the reaction to predominantly one of two possible cleavage sites. In addition, results are presented that suggest that a DNA-DNA pairing intermediate involving only two base pairs of the core sequence is formed prior to the first cleavage and strand exchange. DNA-DNA interactions may therefore not be limited to the isomerization step that follows the first strand exchange.     

NMR solution structure and dynamics of the peptidyl-prolyl cis-trans isomerase domain of the trigger factor from Mycoplasma genitalium compared to FK506-binding protein

We have solved the solution structure of the peptidyl-prolyl cis-trans isomerase (PPIase) domain of the trigger factor from Mycoplasma genitalium by homo- and heteronuclear NMR spectroscopy. Our results lead to a well-defined structure with a backbone rmsd of 0.23 A. As predicted, the PPIase domain of the trigger factor adopts the FK506 binding protein (FKBP) fold. Furthermore, our NMR relaxation data indicate that the dynamic behavior of the trigger factor PPIase domain and of FKBP are similar. Structural variations when compared to FKBP exist in the flap region and within the bulges of strand 5 of the beta sheet. Although the active-site crevice is similar to that of FKBP, subtle steric variations in this region can explain why FK506 does not bind to the trigger factor. Sequence variability (27% identity) between trigger factor and FKBP results in significant differences in surface charge distribution and the absence of the first strand of the central beta sheet. Our data indicate, however, that this strand may be partially structured as "nascent" beta strand. This makes the trigger factor PPIase domain the most minimal representative of the FKBP like protein family of PPIases.     

Asymmetrical progression of replication forks just after initiation on Mycoplasma capricolum chromosome revealed by two-dimensional gel electrophoresis

Previously, we mapped the replication initiation site of the Mycoplasma capricolum chromosome into a region containing the dnaA gene [M. Miyata et al., 1993a. Nucleic Acids Res. 21, 4816–4823]. In this study, various regions including this functional domain were analyzed by two complementary two-dimensional (2D) gel electrophoretic methods. Sizes of nascent strands in a 10.7-kb and a 5.6-kb region were examined by a neutral/alkaline (N/A) method. The shortest nascent strand was detected in an 875-bp region composed of the 3′ end of the dnaA gene and its downstream non-coding sequence. The shortest nascent strand detected became longer in an asymmetrical manner as position of the probe became further from the putative initiation site in both directions. The intermediate forms of eight regions restricted at different sites were examined by a neutral/neutral (N/N) method. Bubble arcs were observed in four regions including the 875-bp region. The region containing the 875-bp region at about its center showed an asymmetrical arc, although that containing the 875-bp region at its end showed a symmetrical arc. These results show that the replication forks develop in the 875-bp region and proceed bidirectionally in an asymmetrical manner around the initiation site. The results of N/A analysis of the 5.6-kb region showed a shift of intensity in the nascent strand signal, which suggests an upshift of fork progression velocity.     

Homologous recombination in real time: DNA strand exchange by RecA

Homologous recombination, the exchange of strands between different DNA molecules, is essential for proper maintenance and accurate duplication of the genome. Using magnetic tweezers, we monitor RecA-driven homologous recombination of individual DNA molecules in real time. We resolve several key aspects of DNA structure during and after strand exchange. Changes in DNA length and twist yield helical parameters for the protein-bound three-stranded structure in conditions in which ATP was not hydrolyzed. When strand exchange was completed under ATP hydrolysis conditions that allow protein dissociation, a "D wrap" structure formed. During homologous recombination, strand invasion at one end and RecA dissociation at the other end occurred at the same rate, and our single-molecule analysis indicated that a region of only about 80 bp is actively involved in the synapsis at any time during the entire reaction involving a long ( approximately 1 kb) region of homology.