The pretreatment of corn stover with Gloeophyllum trabeum KU-41 for enzymatic hydrolysis

Background

Pretreatment is an essential step in the enzymatic hydrolysis of biomass for bio-ethanol production. The dominant concern in this step is how to decrease the high cost of pretreatment while achieving a high sugar yield. Fungal pretreatment of biomass was previously reported to be effective, with the advantage of having a low energy requirement and requiring no application of additional chemicals. In this work, Gloeophyllum trabeum KU-41 was chosen for corn stover pretreatment through screening with 40 strains of wood-rot fungi. The objective of the current work is to find out which characteristics of corn stover pretreated with G. trabeum KU-41 determine the pretreatment method to be successful and worthwhile to apply. This will be done by determining the lignin content, structural carbohydrate, cellulose crystallinity, initial adsorption capacity of cellulase and specific surface area of pretreated corn stover.

Results

The content of xylan in pretreated corn stover was decreased by 43% in comparison to the untreated corn stover. The initial cellulase adsorption capacity and the specific surface area of corn stover pretreated with G. trabeum were increased by 7.0- and 2.5-fold, respectively. Also there was little increase in the cellulose crystallinity of pretreated corn stover.

Conclusion

G. trabeum has an efficient degradation system, and the results indicated that the conversion of cellulose to glucose increases as the accessibility of cellulose increases due to the partial removal of xylan and the structure breakage of the cell wall. This pretreatment method can be further explored as an alternative to the thermochemical pretreatment method.     

Enhanced enzymatic hydrolysis and structural features of corn stover by FeCl3 pretreatment

Corn stover was pretreated with FeCl₃ to remove almost all of the hemicellulose present and then hydrolyzed with cellulase and β-glucosidase to produce glucose. Enzymatic hydrolysis of corn stover that had been pretreated with FeCl₃ at 160 °C for 20 min resulted in an optimum yield of 98.0%. This yield was significantly higher than that of untreated corn stover (22.8%). FeCl₃ pretreatment apparently damaged the surface of corn stover and significantly increased the enzymatic digestibility, as evidenced by SEM and XRD analysis data. FTIR analysis indicated that FeCl₃ pretreatment could disrupt almost all the ether linkages and some ester linkages between lignin and carbohydrates but had no effect on delignification. The FeCl₃ pretreatment technique, as a novel pretreatment method, enhances enzymatic hydrolysis of lignocellulosic biomass by destructing chemical composition and altering structural features.     

Effect of biological pretreatment with Trametes hirsuta yj9 on enzymatic hydrolysis of corn stover

In this study, a newly isolated Trametes hirsuta yj9 was used to pretreat corn stover in order to enhance enzymatic digestibility. T. hirsuta yj9 preferentially degraded lignin to be as high as 71.49% after 42-day pretreatment. Laccase and xylanase was the major ligninolytic and hydrolytic enzyme, respectively and filter paper activity (FPA) increased gradually with prolonged pretreatment time. Sugar yields increased significantly after pretreatment with T. hirsuta yj9, reaching an enzymatic digestibility of 73.99% after 42 days of pretreatment. Scanning electron microscopy (SEM) showed significant structural changes in pretreated corn stover, the surface of pretreated corn stover became increasingly coarse, the gaps between cellulose fibers were visible, and many pores were developed. Correlation analysis showed that sugar yields were inversely proportional to the lignin contents, less related to cellulose and hemicellulose contents.     

Changes in plant cell-wall structure of corn stover due to hot compressed water pretreatment and enhanced enzymatic hydrolysis

Corn stover is a potential feedstock for biofuel production. This work investigated physical and chemical changes in plant cell-wall structure of corn stover due to hot compressed water (HCW) pretreatment at 170–190 °C in a tube reactor. Chemical composition analysis showed the soluble hemicellulose content increased with pretreatment temperature, whereas the hemicellulose content decreased from 29 to 7 % in pretreated solids. Scanning electron microscopy revealed the parenchyma-type second cell-wall structure of the plant was almost completely removed at 185 °C, and the sclerenchyma-type second cell wall was greatly damaged upon addition of 5 mmol/L ammonium sulfate during HCW pretreatment. These changes favored accessibility for enzymatic action. Enzyme saccharification of solids by optimized pretreatment with HCW at 185 °C resulted in an enzymatic hydrolysis yield of 87 %, an enhancement of 77 % compared to the yield from untreated corn stover.     

Carbonic acid enhancement of hydrolysis in aqueous pretreatment of corn stover

Carbonic acid and liquid hot water pretreatments were applied to corn stover. Temperatures ranged from 180 to 220 degrees C; reaction times varied between 2 and 32 min and prereaction carbon dioxide pressure was either 0 or 800 psig. Over the range of reaction conditions tested, it was found that the presence of carbonic acid had an effect of increasing the concentrations of xylose and furan compounds in the hydrolysate that was significant at above the 99% confidence level. Thus there appears to be an increase in the severity of the pretreatment conditions with the presence of carbonic acid. These results are contrary to previously reported results on aspen wood, where the presence of carbonic acid was not found to have an effect on either the xylose or furan concentrations. Although pretreatment conditions were more severe with the addition of carbonic acid, the presence of carbonic acid resulted in a hydrolysate with a higher final pH. Thus it appears that the higher severity conditions reduce the accumulation of organic acids in the hydrolysate. This result was consistent with previously reported work on carbonic acid pretreatment of aspen wood.     

Microscopic examination of changes of plant cell structure in corn stover due to hot water pretreatment and enzymatic hydrolysis

Particle size associated with accessible surface area has a significant impact on the saccharification of plant cell walls by cellulolytic enzymes. Small particle sizes of untreated cellulosic substrate are more readily hydrolyzed than large ones because of higher specific surface area. Pretreatment enlarges accessible and susceptible surface area leading to enhanced cellulose hydrolysis. These hypotheses were tested using ground corn stover in the size ranges of 425-710 and 53-75 microm. Ultrastructural changes in these particles were imaged after treatment with cellulolytic enzymes before and after liquid hot water pretreatment. The smaller 53-75 microm corn stover particles are 1.5x more susceptible to hydrolysis than 425-710 microm corn stover particles. This difference between the two particle size ranges is eliminated when the stover is pretreated with liquid hot water pretreatment at 190 degrees C for 15 min, at pH between 4.3 and 6.2. This pretreatment causes ultrastructural changes and formation of micron-sized pores that make the cellulose more accessible to hydrolytic enzymes.     

Three-stage enzymatic hydrolysis of steam-exploded corn stover at high substrate concentration

The feasibility of three-stage hydrolysis of steam-exploded corn stover at high-substrate concentration was investigated. When substrate concentration was 30% and enzyme loading was 15-30 FPU/g cellulose, three-stage (9+9+12 h) hydrolysis could reach a hydrolysis yield of 59.9-81.4% in 30 h. Compared with one-stage hydrolysis for 72 h, an increase of 34-37% in hydrolysis yield could be achieved. When steam-exploded corn stover was used as the substrate for enzyme synthesis and hydrolysis was conducted at a substrate concentration of 25% with an enzyme loading of 20 FPU/g cellulose, a hydrolysis yield of 85.1% was obtained, 19% higher than that the commercial cellulase could reach under the same conditions. The removal of end products was suggested to improve the adsorption of cellulase on the substrate and enhance the productivity of enzymatic hydrolysis.     

Optimizing harvest of corn stover fractions based on overall sugar yields following ammonia fiber expansion pretreatment and enzymatic hydrolysis

Background  

Corn stover composition changes considerably throughout the growing season and also varies between the various fractions of the plant. These differences can impact optimal pretreatment conditions, enzymatic digestibility and maximum achievable sugar yields in the process of converting lignocellulosics to ethanol. The goal of this project was to determine which combination of corn stover fractions provides the most benefit to the biorefinery in terms of sugar yields and to determine the preferential order in which fractions should be harvested. Ammonia fiber expansion (AFEX) pretreatment, followed by enzymatic hydrolysis, was performed on early and late harvest corn stover fractions (stem, leaf, husk and cob). Sugar yields were used to optimize scenarios for the selective harvest of corn stover assuming 70% or 30% collection of the total available stover.     

Combined sugar yields for dilute sulfuric acid pretreatment of corn stover followed by enzymatic hydrolysis of the remaining solids

A number of previous studies determined dilute acid pretreatment conditions that maximize xylose yields from pretreatment or glucose yields from subsequent digestion of the pretreated cellulose, but our emphasis was on identifying conditions to realize the highest yields of both sugars from both stages. Thus, individual xylose and glucose yields are reported as a percentage of the total potential yield of both sugars over a range of sulfuric acid concentrations of 0.22%, 0.49% and 0.98% w/w at 140, 160, 180 and 200 degrees C. Up to 15% of the total potential sugar in the substrate could be released as glucose during pretreatment and between 15% and 90+% of the xylose remaining in the solid residue could be recovered in subsequent enzymatic hydrolysis, depending on the enzyme loading. Glucose yields increased from as high as 56% of total maximum potential glucose plus xylose for just enzymatic digestion to 60% when glucose released in pretreatment was included. Xylose yields similarly increased from as high as 34% of total potential sugars for pretreatment alone to between 35% and 37% when credit was taken for xylose released in digestion. Yields were shown to be much lower if no acid was used. Conditions that maximized individual sugar yields were often not the same as those that maximized total sugar yields, demonstrating the importance of clearly defining pretreatment goals when optimizing the process. Overall, up to about 92.5% of the total sugars originally available in the corn stover used could be recovered for coupled dilute acid pretreatment and enzymatic hydrolysis. These results also suggest that enhanced hemicellulase activity could further improve xylose yields, particularly for low cellulase loadings.     

Biological pretreatment of corn stover with Phlebia brevispora NRRL‐13108 for enhanced enzymatic hydrolysis and efficient ethanol production

Biological pretreatment of lignocellulosic biomass by white‐rot fungus can represent a low‐cost and eco‐friendly alternative to harsh physical, chemical, or physico‐chemical pretreatment methods to facilitate enzymatic hydrolysis. In this work, solid‐state cultivation of corn stover with Phlebia brevispora NRRL‐13018 was optimized with respect to duration, moisture content and inoculum size. Changes in composition of pretreated corn stover and its susceptibility to enzymatic hydrolysis were analyzed. About 84% moisture and 42 days incubation at 28°C were found to be optimal for pretreatment with respect to enzymatic saccharification. Inoculum size had little effect compared to moisture level. Ergosterol data shows continued growth of the fungus studied up to 57 days. No furfural and hydroxymethyl furfural were produced. The total sugar yield was 442 ± 5 mg/g of pretreated corn stover. About 36 ± 0.6 g ethanol was produced from 150 g pretreated stover per L by fed‐batch simultaneous saccharification and fermentation (SSF) using mixed sugar utilizing ethanologenic recombinant Eschericia coli FBR5 strain. The ethanol yields were 32.0 ± 0.2 and 38.0 ± 0.2 g from 200 g pretreated corn stover per L by fed‐batch SSF using Saccharomyces cerevisiae D5A and xylose utilizing recombinant S. cerevisiae YRH400 strain, respectively. This research demonstrates that P. brevispora NRRL‐13018 has potential to be used for biological pretreatment of lignocellulosic biomass. This is the first report on the production of ethanol from P. brevispora pretreated corn stover. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:365–374, 2017     

Alkali treatment of corn stover to improve sugar production by enzymatic hydrolysis

Alkali treatment of corn stover improves the avaliability of cellulose and hemicellulose for enzymatic attack. Treatments were carried out for 1 to 60 min at temperatures and NaOH concentrations ranging from 100 to 150 degrees C and 0 to 2%, respectively. Solubilization of the stover and sugar production by enzymatic hydrolysis (Trichoderma viride cellulase) of the solid residue and the dissolved solids were used to measure the effect of caustic treatment. At 150 degrees C and 2% NaOH concentration, 65% of the original stover was dissolved after 5 min and 52% saccharificatin (g sugar/g stover) of the residue and dissolved solids by enzymatic hydrolysis was achieved compared to 20% for untreated corn stover.     

The influence of lignin migration and relocation during steam pretreatment on the enzymatic hydrolysis of softwood and corn stover biomass substrates

To be effective, steam pretreatment is typically carried out at temperatures/pressures above the glass transition point (Tg) of biomass lignin so that it can partly fluidize and relocate. The relocation of Douglas-fir and corn stover derived lignin was compared with the expectation that, with the corn stover lignin's lower hydrophobicity and molecular weight, it would be more readily fluidized. It was apparent that the Tg of lignin decreased as the moisture increased, with the easier access of steam to the corn stover lignin promoting its plasticization. Although the softwood lignin was more recalcitrant, when it was incorporated onto filter paper, it too could be plasticized, with its relocation enhancing enzymatic hydrolysis. When lignin recondensation was minimized, the increased hydrophobicity suppressed lignin relocation. It was apparent that differences in the accessibility of the lignin present in Douglas-fir and corn stover to steam significantly impacted lignin fluidization, relocation, and subsequent cellulose hydrolysis.     

Effect of hemicellulose and lignin removal on enzymatic hydrolysis of steam pretreated corn stover

Ethanol can be produced from lignocellulosic biomass using steam pretreatment followed by enzymatic hydrolysis and fermentation. The sugar yields, from both hemicellulose and cellulose are critical parameters for an economically-feasible ethanol production process. This study shows that a near-theoretical glucose yield (96-104%) from acid-catalysed steam pretreated corn stover can be obtained if xylanases are used to supplement cellulases during hydrolysis. Xylanases hydrolyse residual hemicellulose, thereby improving the access of enzymes to cellulose. Under these conditions, xylose yields reached 70-74%. When pre-treatment severity was reduced by using autocatalysis instead of acid-catalysed steam pretreatment, xylose yields were increased to 80-86%. Partial delignification of pretreated material was also evaluated as a way to increase the overall sugar yield. The overall glucose yield increased slightly due to delignification but the overall xylose yield decreased due to hemicellulose loss in the delignification step. The data also demonstrate that steam pretreatment is a robust process: corn stover from Europe and North America showed only minor differences in behaviour.     

Effect of anatomical fractionation on the enzymatic hydrolysis of acid and alkaline pretreated corn stover

Due to concerns with biomass collection systems and soil sustainability there are opportunities to investigate the optimal plant fractions to collect for conversion. An ideal feedstock would require a low severity pretreatment to release a maximum amount of sugar during enzymatic hydrolysis. Corn stover fractions were separated manually and analyzed for glucan, xylan, acid soluble lignin, acid insoluble lignin, and ash composition. The stover fractions were also pretreated with either 0%, 0.4%, or 0.8% NaOH for 2 h at room temperature, washed, autoclaved and saccharified. In addition, dilute sulfuric acid pretreated samples underwent simultaneous saccharification and fermentation (SSF) to ethanol. In general, the two pretreatments produced similar trends with cobs, husks, and leaves responding best to the pretreatments, the tops of stalks responding slightly less, and the bottom of the stalks responding the least. For example, corn husks pretreated with 0.8% NaOH released over 90% (standard error of 3.8%) of the available glucan, while only 45% (standard error of 1.1%) of the glucan was produced from identically treated stalk bottoms. Estimates of the theoretical ethanol yield using acid pretreatment followed by SSF were 65% (standard error of 15.9%) for husks and 29% (standard error of 1.8%) for stalk bottoms. This suggests that integration of biomass collection systems to remove sustainable feedstocks could be integrated with the processes within a biorefinery to minimize overall ethanol production costs.     

Effect of particle size based separation of milled corn stover on AFEX pretreatment and enzymatic digestibility

Particle size and compositional variance are found to have a substantial influence on ammonia fiber explosion (AFEX) pretreatment and enzymatic hydrolysis of lignocellulosic biomass. Corn stover was milled and fractionated into particle sizes of varying composition. The larger particle size fractions (rich in corn cob and stalk portions) were found to be more recalcitrant to hydrolysis compared to the smaller size fractions (rich in leaves and husk portion). Electron spectroscopy for chemical analysis (ESCA) and Fourier transform infrared spectroscopy (FTIR) were used for biomass surface and bulk compositional analysis, respectively. The ESCA results showed a 15-30% decrease in the O/C (oxygen to carbon) ratio after the pretreatment indicating an increase in the hydrophobic nature of biomass surface. FTIR results confirmed cleavage of the lignin-carbohydrate complex (LCC) for the AFEX-treated fractions. The spectroscopic results indicate the extraction of cleaved lignin phenolic fragments and other cell wall extractives to the biomass surface upon AFEX. Water washing of AFEX-treated fractions removed some of the hydrophobic extractives resulting in a 13% weight loss (dry weight basis). Phenolic content of wash stream was evaluated by the modified Prussian blue (MPB) method. Removal of ligno-phenolic extractives from the AFEX-treated biomass by water washing vastly improved the glucan conversion as compared to the unwashed samples. Reduction in substrate particle size was found to affect the AFEX process and rate of hydrolysis as well. Implications of the stover particle size, composition, and inhibitory role of the phenolic fragments on an integrated biorefinery are discussed.     

Delignification kinetics of corn stover in lime pretreatment

Corn stover was pretreated with excess calcium hydroxide (0.5 g Ca(OH)(2)/g raw biomass) in non-oxidative and oxidative conditions at 25, 35, 45, and 55 degrees C. The delignification kinetic model of corn stover used three first-order reactions with following forms: W(L) = 0.09 x exp(-infinity x t) + 0.28 x exp(-k(2) x t) + 0.63 x exp(-k(3) x t) in non-oxidative pretreatment; W(L) = 0.16 x exp(-infinity x t) + 0.27 x exp(-k(2) x t) + 0.57 x exp(-k(3) x t) in oxidative pretreatment. The first term corresponds to the initial phase, which is essentially infinite at the time scale of the reaction (weeks). The second and third terms correspond to the bulk and residual phases of delignification. The activation energies for delignification in the oxidative lime pretreatment reactions were estimated as 50.15 and 54.21 kJ/mol in the bulk and residual phases, respectively, which are similar to the Kraft delignification of bagasse, but much less than in Kraft delignification of wood.     

Low-liquid pretreatment of corn stover with aqueous ammonia

A low-liquid pretreatment method of corn stover using aqueous ammonia was studied to reduce the severity and liquid throughput associated with the pretreatment step for ethanol production. Corn stover was treated at 0.5-50.0 wt.% of ammonia loading, 1:0.2-5.0 (w/w) of solid-to-liquid ratio, 30 °C for 4-12 weeks. The effects of these conditions on the composition and enzyme digestibility of pretreated corn stover were investigated. Pretreatment of corn stover at 30 °C for four weeks using 50 wt.% of ammonia loading and 1:5 solid-to-liquid ratio resulted in 55% delignification and 86.5% glucan digestibility with 15 FPU cellulase + 30 CBU β-glucosidase/g-glucan.Simultaneous saccharification and fermentation of corn stover treated at 30 °C for four weeks using 50 wt.% ammonia loading and 1:2 solid-to-liquid ratio gave an ethanol yield of 73% of the theoretical maximum based on total carbohydrates (glucan + xylan) present in the untreated material.     

Economic impact of total solids loading on enzymatic hydrolysis of dilute acid pretreated corn stover

In process integration studies of the biomass-to-ethanol conversion process, it is necessary to understand how cellulose conversion yields vary as a function of solids and enzyme loading and other key operating variables. The impact of solids loading on enzymatic cellulose hydrolysis of dilute acid pretreated corn stover slurry was determined using an experimental response surface design methodology. From the experimental work, an empirical correlation was obtained that expresses monomeric glucose yield from enzymatic cellulose hydrolysis as a function of solids loading, enzyme loading, and temperature. This correlation was used in a technoeconomic model to study the impact of solids loading on ethanol production economics. The empirical correlation was used to provide a more realistic assessment of process cost by accounting for changes in cellulose conversion yields at different solids and enzyme loadings as well as enzyme cost. As long as enzymatic cellulose conversion drops off at higher total solids loading (due to end-product inhibition or other factors), there is an optimum value for the total solids loading that minimizes the ethanol production cost. The optimum total solids loading shifts to higher values as enzyme cost decreases.     

Analysis of particle size reduction on overall surface area and enzymatic hydrolysis yield of corn stover

Particle size of lignocellulose materials is an important factor for enzymatic hydrolysis efficiency. In this study, corn stover was milled and sieved into different size fractions from 1.42, 0.69, 0.34, to 0.21 mm, and the corresponding enzymatic hydrolysis yields were 24.69, 23.96, 25.34, and 26.97 %, respectively. The results indicate that the hydrolysis yield is approximately constant with changing corn stover particle sizes in the experimental range. The overall surface area and the inner pore size measurement show that the overall specific surface area was less than 2 % with the half reduction of particle size due to the greater inner pore surface area. The scanning electron microscope photographs gave direct evidence of the much greater inner pore surface area of corn stover particles. This result provided a reference when a proper size reduction of lignocellulose materials is considered in biorefining operations.     

玉米秸秆分批补料获得高还原糖浓度酶解液的条件优化

木质纤维素高浓度还原糖水解液的获得是纤维乙醇产业化发展的方向。在发酵工业领域,分批补料法是实现这一目标的重要研究途径。本研究采用分批补料法对获得高浓度玉米秸秆酶解还原糖的条件进行了优化。以稀硫酸预处理的玉米秸秆为原料,考察了液固比、补加量与补加时间对分批补料糖化的影响。结果表明,秸秆高浓度酶解液条件的初始物料为20％ (重量/体积),木聚糖酶220 U/g (底物),纤维素酶6 FPU/g (底物),果胶酶50 U/g (底物),在24 h、48 h后分批补加8％预处理后的物料,同时添加与补料量相应的木聚糖酶20 U/g (底物),纤维素酶2 FPU/g (底物),72 h后,最终糖化结果与非补料法相比,还原糖浓度从48.5 g/L提高到138.5 g/L,原料的酶解率最终达到理论值的62.5％。试验结果表明补料法可以显著提高秸秆水解液还原糖浓度。