Why only tetraploid Solidago gigantea (Asteraceae) became invasive: a common garden comparison of ploidy levels

Many studies have compared the growth of plants from native and invasive populations, but few have considered the role of ploidy. In its native range in North America, Solidago gigantea Aiton (Asteraceae) occurs as a diploid, tetraploid and hexaploid, with considerable habitat differentiation and geographic separation amongst these ploidy levels. In the introduced range in Europe, however, only tetraploid populations are known. We investigated the growth performance and life history characteristics of plants from 12 European and 24 North American (12 diploid, 12 tetraploid) populations in a common garden experiment involving two nutrient and two calcium treatments. Twelve plants per population were grown in pots for two seasons. We measured 24 traits related to leaf nutrients, plant size, biomass production and phenology as well as sexual and vegetative reproduction. Native diploid plants had a higher specific leaf area and higher leaf nutrient concentrations than native tetraploids, but tetraploids produced many more shoots and rhizomes. Diploids grown with additional calcium produced less biomass, whereas tetraploids were not affected. European plants were less likely to flower and produced smaller capitulescences than North American tetraploids, but biomass production and shoot and rhizome number did not differ. We conclude that a knowledge of ploidy level is essential in comparative studies of invasive and native populations. While clonal growth is important for the invasion success of tetraploid S. gigantea, its potential was not acquired by adaptation after introduction but by evolutionary processes in the native range.     

Somatic embryogenesis from mature <Emphasis Type="Italic">Bambusa balcooa</Emphasis> Roxburgh as basis for mass production of elite forestry bamboos

A reliable protocol for mass propagation via somatic embryogenesis in mature bamboos has been established using pseudospikelets of Bambusa balcooa. Fourty percent of the explants gave rise to multiple regenerants within 4 months. This conversion rate is sufficiently high to use the process in commercial mass production. Further, shoot apical meristems can also be used as primary explants without lost of efficiency. Regenerated plants were uniform and identical to the mother plant and to plants obtained by axillary branching with respect to growth characteristics and morphology. Furthermore, epigenetic changes could not be detected by Methylation Sensitive AFLP (MSAP). During the complete process no changes in ploidy level could be observed. The process allows for a cost reduction for this tropical bamboo for forestry of up to 57% compared to micropropagation via axillary branching. For the first time, a reliable process based on somatic embryogenesis has been developed that is well suited for commercial micropropagation of elite mature bamboos.     

Tetraploid induction of Mitracarpus hirtus L. by colchicine and its characterization including antibacterial activity

Tetraploid plants were successfully induced for the first time in Mitracarpus hirtus L., by overnight immersion of shoot meristems in 0.1 % colchicine solution, followed by in vitro culture leading to plant regeneration. Examination of ploidy level by flow cytometric analysis and counting chromosome number at metaphase confirmed that original diploid plant (WT1) contained chromosome number as 2n = 2x = 28, whereas 2n = 4x = 56 was observed in the tetraploids induced with colchicine treatment (CC102 and CC110). Thicker root formation, larger stomata (1.3–2 times), and lower density of stomata (1.7–4 times) were observed in these tetraploid plants. After transplantation to the pot, tetraploid plant (CC110) showed higher fresh weights of aerial part and leaves (1.5 and 1.4 times respectively) than diploid. However, the methanolic extracts from leaves of tetraploid line CC102 showed inhibition against human pathogenic bacterium, S. aureus while WT1 and CC110 showed no activity. GC–MS revealed 40 unique compounds present in CC102, but absent in WT1 and CC110. Through hierarchical clustering analysis the 40 unique compounds in CC102 formed a cluster group found to correlate with anti-S. aurens activity. These results suggested that tetraploid M. hirtus CC102 created in this study provides a novel source of compounds useful in fighting infectious disease.     

In vitro induction of tetraploid plants from a diploid Japanese pear cultivar (Pyrus pyrifolia N. cv. Hosui)

Tetraploid plants of a Japanese pear cultivar (Pyrus pyrifolia N.) were induced using an in vitro colchicine treatment. Proliferating shoots were transferred to a shoot proliferation medium (SPM) containing 0.1% or 0.01% colchicine, incubated for 1, 2, 4 or 8 days, then transferred to fresh SPM. The ploidy level of the colchicine-treated individuals was analysed by flow cytometry. Four months after colchicine treatment four mixoploids were selected and cultured on SPM for a further 5 months. The ploidy level of the proliferated shoots derived from selected mixoploids was analysed, and five tetraploid shoots were selected. The selected tetraploid shoots were rooted, and potted plants were grown in a greenhouse. The stomata of tetraploid plants were found to be longer than those in diploid plants.     

Long-term ploidy stability of shoot primordium cultures and produced plants of melon

The chromosome number of cells in the shoot primordium aggregates and produced plants of melon [Cucumis melo L. 'Prince' (2n=2x=24)] was examined. Shoot primordium aggregates were induced from shoot-tips cultured in liquid medium and shaken at low speed (2 rpm). They were maintained by subculturing small pieces (5mm<) every 4 weeks. Shoot primordium aggregates just after induction contained about 97 diploid and 3 tetraploid cells, which was similar to those maintained in shoot primordium cultures for 6 years. This indicates that the ploidy level was maintained stably. On the other hand, plants produced from the shoot primordium aggregates just after induction were either diploid, tetraploid or mixoploid with both diploid and tetraploid cells. These ploidies were again observed among plants produced from shoot primordium cultures that were 2, 3 or 4 years old. A majority of produced plants were diploid while the total frequency of tetraploids and mixoploids was less than 8 of plants produced from all ages. Therefore, the frequency of somaclonal variation with respect to ploidy among plants produced from shoot primordium aggregates is likely to be stable at a low level over the long term.     

In vitro induction and identification of tetraploid plants of <Emphasis Type="Italic">Paulownia tomentosa</Emphasis>

Polyploidization is a major trend in plant evolution that has many advantages over diploid. In particular, the enlargement and lower fertility of polyploids are very attractive traits in forest tree breeding programs. We report here a system for the in vitro induction and identification of tetraploid plants of Paulownia tomentosa induced by colchicine treatment. Embryonic calluses derived from placentas were transferred to liquid Murashige and Skoog (MS) medium containing different concentrations of colchicine (0.01, 0.05, or 0.1%) and incubated for 24, 48, or 72 h on an orbital shaker at 110 rpm. The best result in terms of the production of tetraploid plantlets was obtained in the 48 h + 0.05% colchicine treatment, with more than 100 tetraploid plantlets being produced. The ploidy level of plantlets was verified by chromosome counts, flow cytometry, and morphology. The chromosome number of tetraploids was 2n = 4x = 80 and that of diploid plantlets was 2n = 2x = 40. The relative fluorescence intensity of tetraploids was twofold higher than that of diploids. The tetraploid and diploid plantlets differed significantly in leaf shape, with those of the former being round and those of the latter pentagonal. The mean length of the stomata was longer in tetraploid plants than diploid plants, and stomatal frequency was reduced with the increased ploidy level. The tetraploids had large floral organs that were easily distinguishable from those of diploid plants.     

In vitro induction of tetraploids in Arachis paraguariensis

In this study, an efficient procedure was established for successful induction of tetraploid Arachis paraguariensis by treating diploid explants with colchicine. Quartered-seed, callus and shoot-tips were treated with colchicine at concentrations of 0.05, 0.1, 0.2 and 0.5?% (w/v) for 4, 8, 16, 20 and 24?h before they were transferred unto modified Murashige and Skoog medium for either callus induction or shoot regeneration. Results showed that quartered-seed displayed the highest frequency of in vitro plantlet regeneration and tetraploid induction, as well as the lowest mortality rate. Flow cytometric analysis also confirmed that the induced tetraploids from quartered-seed were true-to-type. The 0.5?% colchicine treatment for 4 to 8?h gave the best results with 39 and 43?% of the explants yielding tetraploid plants, respectively. Two?months following transfer to ex vitro environment, morphological and growth characteristics of the induced tetraploids were measured. Overall, increasing the ploidy level from 2× to 4× resulted in fewer stomata but more trichomes per unit leaf area. Tetraploid plants obtained in this study should expand the genetic base of Arachis, and can also be used in overcoming the existing hybridization barriers that may be due to ploidy differences within the genus Arachis.     

Chromosome doubling of 2x Solanum species by oryzalin: method development and comparison with spontaneous chromosome doubling in vitro

A potato breeding scheme implies the possibility of ploidy level manipulation either by reducing the chromosome number of cultivars from 48 to 24 to be able to cross them with diploid related species or by doubling diploid material to reach the generally optimal tetraploid level. In vitro spontaneous chromosome doubling is widely used but can lead to somaclonal variation. Since oryzalin has proven to be efficient as a chromosome doubling agent on potato cell suspension cultures, we tried this herbicide on various Solanum species and interspecific diploid hybrids. A 24 h dip in a 28.8 M aqueous oryzalin solution applied on apical buds was the most efficient treatment in terms of tetraploid plant production (mean = 4.1 tetraploid plants for 10 treated buds over 4 genotypes). However 50–100% of the regenerated tetraploid plants acclimatized after in vitro treatment proved to be chimaeric. Consequently, a selection procedure in the progeny was necessary to obtain real and stable doubled clones and final yields were low. This technique is easy to apply and could be a good alternative to chromosome doubling by spontaneous in vitro regeneration in the case of refractory genotypes especially where somaclonal variation is problematic. Percentage of tetraploids among the regenerated plants varied from 6 to 29% with the oryzalin doubling technique while it varied from 20 to 78% by in vitro spontaneous doubling for five diploid genotypes. An observation of the progeny indicated that chimaeras were more frequent using oryzalin (50–100% of the initially supposed tetraploid plants) than when chromosomes doubled spontaneously (4–67% of the initially supposed tetraploid plants).     

A comparative study of bioactive secondary metabolite production in diploid and tetraploid Echinacea purpurea (L.) Moench

The impact of the ploidy level on biomass accumulation and the production of high-value secondary metabolites was studied in Echinacea purpurea (L.) Moench. Tetraploid E. purpurea was obtained by treating diploid explants with colchicine. The morphology, biomass yield, the contents of caffeic acid derivatives and alkamides, and the activities of phenylalanine ammonia-lyase (PAL) and cinnamate 4-hydroxylase (C4H) were compared between diploid plants and tetraploid plants of E. purpurea. The total fresh root weight and total dry root weight of the tetraploid plants were 39.32 and 40.48 % higher than those of the diploid plants, respectively. The chemical profiles of the diploid and tetraploid E. purpurea plants were similar, as determined through a comparison of their FTIR spectra and second derivative spectra. The caffeic acid derivatives and alkamides in the diploid and tetraploid plants were determined by HPLC. The tetraploid plants had higher contents of both of these types of molecules. In addition, the tetraploid plants had higher PAL and C4H activities compared with the diploid plants. The enhancement in the PAL and C4H activities was accompanied with an increase in the cichoric acid content, which indicates that the induction of polyploidy in E. purpurea resulted in higher PAL and C4H expression and promoted the biosynthesis of cichoric acid. Therefore, the induction of polyploidy may be a valid strategy to achieve a higher yield of biomass and bioactive compounds in E. purpurea.     

Morphological, physiological, cytological and phytochemical studies in diploid and colchicine-induced tetraploid plants of Echinacea purpurea (L.)

Echinacea purpurea (L.) is one of the important medicinal plant species. To obtain the tetraploid plants of Echinacea purpurea with improved medicinal qualities, the root tips of two true leaves seedlings were imbibed in 0.25 % (w/v) colchicine solution for 24, 48, 72, 96 and 168 h. The ploidy level of plants was determined by chromosome counting of root tip cells, and confirmed by flow cytometric analysis. Tetraploid induction occurred in seedlings treated for 24, 48 and 72 h at colchicine solution. The morphological, physiological, cytological, and phytochemical characteristics of diploid and colchicine-induced tetraploid plants were compared. Results indicated that tetraploid plants had considerable larger stomata, pollen grain, seed and flower. Moreover, chloroplast number in guard cells, amount of chlorophyll (a, b, and a + b), carotenoids as well as width and thickness of leaves were increased in tetraploids. However, stomata frequency, leaf index, plant height, and quantum efficiency of photosystem II in tetraploid were lower than diploid plants. High-performance liquid chromatography analysis showed that leaves of the tetraploid plants had more cichoric acid (45 %) and chlorogenic acid (71 %) than diploid plants. It was concluded that morphological and physiological characteristics can be used as useful parameters for preliminary screening of putative tetraploids in this species.     

Haematological characterization of loach Misgurnus anguillicaudatus: comparison among diploid, triploid and tetraploid specimens

The purpose of this study was to determine whether diploid, triploid and tetraploid loach (Misgurnus anguillicaudatus) differed in terms of their main haematological and physiological characteristics. Diploid and tetraploid fish were produced by crossing of natural diploids (2n x 2n) and natural tetraploids (4n x 4n), respectively. Triploid fish were produced by hybridization between diploid males and tetraploid females. The blood cells were significantly larger in polyploids, and the volumetric ratios of erythrocytes and leucocytes (thrombocyte and neutrophil) in tetraploids, triploids and diploids were consistent with the ploidy level ratio of 4:3:2. No significant differences were observed in haematocrit among polyploids. The erythrocyte count decreased with increased ploidy level, while total haemoglobin, mean cell volume, mean cellular haemoglobin content, and mean cell haemoglobin concentration all increased with increase in ploidy level. Erythrocyte osmotic brittleness declined in polyploids so that polyploid erythrocytes were more resistant to osmotic stress than diploid ones. Overall, loach with higher ploidy levels showed evidence of some advantages in haematological characteristics.     

Influence of ploidy level on morphology,growth and drought susceptibility in <Emphasis Type="Italic">Spathiphyllum wallisii</Emphasis>

In this study, we analysed morphological, anatomical and physiological effects of polyploidisation in Spathiphyllum wallisii in order to evaluate possible interesting advantages of polyploids for ornamental breeding. Stomatal density was negatively correlated with increased ploidy level. Stomatal size increased in polyploids. Tetraploid Spathiphyllum plants had more ovate and thicker leaves. The inflorescence of tetraploids had a more ovate and thicker spathum, a more cylindrical spadix and a thicker but shorter flower stalk. Biomass production of the tetraploids was reduced, as expressed by lower total dry weights, and tetraploids produced fewer shoots and leaves compared with their diploid progenitors. Furthermore, tetraploid Spathiphyllum plants were more resistant to drought stress compared with diploid plants. After 15 days of drought stress, diploids showed symptoms of wilting, while the tetraploids showed almost no symptoms. Further, measurements of stomatal resistance, leaf water potential, relative water content and proline content indicated that the tetraploid genotypes were more resistant to drought stress compared with the diploids.     

Saponin production is not qualitatively changed upon callus regeneration in the medicinal shrub Maesa perlarius

Maesa perlarius is a medicinal plant that produces maesabalides, which possess selective and strong anti-leishmania activity. In this study, M. perlarius plants were regenerated from leaf-derived calli. Shoots were induced in Murashige and Skoog medium in the presence of thidiazuron in combination with α-naphthalene acetic acid. In contrast to seed-derived plants, callus-derived regenerants were tetraploid showing typical characteristics of higher ploidy phenotypes. We assessed the impact of indirect plant regeneration and associated increase in ploidy on the production of saponin by means of LC–MS analysis. Tetraploid M. perlarius produce a saponin profile, which was not significantly different from seed grown plants. Based on this study, we concluded that saponin production in M. perlarius is not qualitatively changed by a genome-doubling event.     

Ploidy level of the invasive weed Rubus alceifolius (Rosaceae) in its native range and in areas of introduction

 A change in ploidy level could increase invasiveness of introduced plants in insular plant communities. To examine this question for R. alceifolius, we compared its ploidy level in its Asian native range and in the Indian Ocean islands where it has been introduced. We first counted chromosomes on root tips from a Vietnamese individual, which proved to be tetraploid (2n=4x=28). The nuclear DNA content of other individuals from the native range and areas of introduction was estimated using the flow cytometry method. The Vietnamese individual on which chromosomes were counted was added to the sample, to enable deduction of the ploidy level of all individuals from their nuclear DNA content. All individuals were found to be tetraploid, except 10 individuals from a single clone collected in a Vietnamese population, estimated to be triploid, and morphologically different of other individuals of this study. We showed that while polyploidy of the source population may have predisposed this plant to become a successful invader, its introduction into Indian Ocean islands was not associated with any change in ploidy level. Received January 23, 2001 Accepted May 22, 2001     

Production of tropane alkaloids in diploid and tetraploid plants and in vitro hairy root cultures of Egyptian henbane (Hyoscyamus muticus L.)

In this study, the effects of ploidy level and culture medium were studied on the production of tropane alkaloids. We have successfully produced stable tetraploid hairy root lines of Hyoscyamus muticus and their ploidy stability was confirmed 30?months after transformation. Tetraploidy affected the growth rate and alkaloid accumulation in plants and transformed root cultures of Egyptian henbane. Although tetraploid plants could produce 200% higher scopolamine than their diploid counterparts, this result was not observed for corresponding induced hairy root cultures. Culture conditions did not only play an important role for biomass production, but also significantly affected tropane alkaloid accumulation in hairy root cultures. In spite of its lower biomass production, tetraploid clone could produce more scopolamine than the diploid counterpart under similar growth conditions. The highest yields of scopolamine (13.87?mg?l^?1) and hyoscyamine (107.7?mg 1^?1) were obtained when diploid clones were grown on medium consisting of either Murashige and Skoog with 60?g/l sucrose or Gamborg??s B5 with 40?g/l sucrose, respectively. Although the hyoscyamine is the main alkaloid in the H. muticus plants, manipulation of ploidy level and culture conditions successfully changed the scopolamine/hyoscyamine ratio towards scopolamine. The fact that hyoscyamine is converted to scopolamine is very important due to the higher market value of scopolamine.     

Meristem aging is not responsible for age-related changes in growth and abscisic acid levels in the Mediterranean shrub, Cistus clusii

To obtain new insights into the mechanisms underlying aging in perennials, we measured abscisic acid levels, growth and other stress indicators in leaves of Cistus clusii Dunal plants of different ages grown under Mediterranean field conditions. Recently emerged leaves from 9-year-old plants were compared to those of 1-year-old plants (obtained from cuttings from 9-year-old plants) to evaluate the effects of meristem aging on plant aging. Rooting and successful establishment of the cuttings allowed us to compare the physiology of plants with old meristems, but of different size. Plants obtained from cuttings were rejuvenated, with new leaves displaying a higher leaf area and chlorophyll content, but smaller leaf mass per unit area ratios and endogenous abscisic acid levels than those of 9-year-old plants. A comparative study in 1-, 4- and 9-year-old plants revealed that abscisic acid levels increase during the early stages of plant life (with increases of 90% between 1- and 4-year-old plants), but then remain constant at advanced developmental stages (between 4- and 9-year-old plants). Although leaf biomass was 53% smaller in 9-year-old compared to 4-year-old plants, the dry matter produced per shoot apical meristem was equivalent in both plant groups due to an increased number of leaves per shoot in the former. It is concluded that (i) C. clusii plants maintain the capacity to rejuvenate for several years; (ii) newly emerged leaves accumulate higher amounts of abscisic acid during early stages of plant life, but the levels of this phytohormone later remain constant; and (iii) although plant aging leads to the production of smaller leaves, the amount of biomass produced per shoot apical meristem remains constant at advanced developmental stages.     

Shoot endophytic plant growth-promoting bacteria reduce cadmium toxicity and enhance switchgrass (<Emphasis Type="Italic">Panicum virgatum</Emphasis> L.) biomass

The aims of the study were to increase the biomass and to alleviate the deleterious effects of cadmium (Cd) in the switchgrass cultivars (Panicum virgatum L.) Alamo and Cave-in-Rock (CIR) under cadmium (Cd) stress using Cd-tolerant shoot endophytic plant growth-promoting bacteria (PGPB). Four shoot endophytic bacterial strains, viz. Bc09, So23, E02, and Oj24, were isolated from the above-ground parts of plants grown in a Cd-polluted soil and were successfully identified by 16S rRNA gene sequencing as Pseudomonas grimontii, Pantoea vagans, Pseudomonas veronii, and Pseudomonas fluorescens, respectively. These four strains were adapted to high CdCl₂ concentrations as they had higher Cd uptake capacities. In addition, they possessed a huge amount of growth regulatory activities e.g., indole acetic acid production, 1-aminocyclopropane-1-carboxylic acid deaminase (ACCD) activity, and phosphate solubilization. Growth particularly the height and biomass of both cultivars increased significantly in response to PGPB inoculation in the 20 µM CdCl₂ stress. The shoot biomass of the PGPB-inoculated Alamo was higher than the CIR under Cd stress. Interestingly, the level of Cd inside PGPB-inoculated plant tissues and the translocation factors were lower compared with the noninoculated Cd control plants. CIR plants exhibited higher Cd content than Alamo plants. Through confocal microscopy, green fluorescence was observed in roots and leaf tissues 2 days after the inoculation of green fluorescent protein (GFP)-labeled bacteria in Alamo, which confirmed the successful colonization of bacteria inside the plant tissues. These shoot endophytic PGPB and switchgrass interactions are useful for the sustainable biomass production of bioenergy crop in a Cd-contaminated environment.     

Phytohormones Accumulation and Distribution in Shoots and Roots of Haploid,Diploid and Tetraploid Barley Seedlings Derived from Microspore Culture

Phytohormones play important roles in plant growth and development, and polyploids are thought to be an important method for plant breeding. However, the relationship between ploidy and phytohormone is still unclear. In this study, barley at three ploidy levels were produced by microspore culture. Therefore, we further analyzed the phytohormone content in the shoots and roots of the three kinds of barley materials to study the effect of ploidy on phytohormones accumulation and distribution. The results showed that Abscisic acid (ABA), gibberellin (GA), jasmonic acid (JA), auxin (IAA), salicylic acid (SA) and cytokinin (CTK) were successfully determined in shoots and roots using LC-MS (liquid chromatography mass spectrometry). By comparing the shoots of the haploid and diploid plants, it was found that the distribution trend of the six phytohormones was consistent, and another consistent trend was found in the roots of the diploid and tetraploid plants. In addition, we further analyzed the shoot/root ratio of the different phytohormones to identify the potential differences for haploid, diploid and tetraploid. Here, the relationship between ploidy and phytohormone we provided would provide new insights into understanding the new phenotypes that occur in polyploid species.     

Induction of tetraploid poplar and black locust plants using colchicine: chloroplast number as an early marker for selecting polyploids in vitro

Tetraploid plants were produced by inducing chromosome doubling using colchicine in in vitro shoot tips of poplar and black locust clones. Many of the plants treated with colchicine showed modified morphological characteristics like stunted growth, thicker leaves and modified leaf morphology. The counting of chloroplast number in the epidermal guard cells of stomata was used for the rapid screening of tetraploids. The differences in mean chloroplast numbers between diploid and tetraploid plants were highly significant. For all plants tested, the tetraploid genotype had almost double the number of chloroplasts per guard cell compared to the diploid origin. Some plants were further analysed by flow cytometry to verify their ploidy status that was determined by chloroplast numbers. The results of this study demonstrated for the first time that chloroplast counting in poplar and black locust could be an effective and reliable method for pre-screening large numbers of plants for their ploidy level. The protocol might be applicable in a wide scope of breeding programs.