Development of a screen-printed amperometric biosensor for the determination of L-lactate dehydrogenase level.

We attempted to develop a screen-printed biosensor for the amperometric determination of L-lactate dehydrogenase (LDH) level on the basis of NAD(+)/NADH-dependent dehydrogenase reaction. The printing ink for the working electrode consisted of L-lactate, NAD(+), composite polymer of hydroxyethyl cellulose with ethylene glycol, 3,4-dihydroxybenzaldehyde (3,4-DHB) as an electron transferring mediator, and graphite as the conducting material. The 3,4-DHB was electropolymerized on the carboneous working electrode by potential cycling between -200 and +300 mV vs. Ag/AgCl reference electrode. Through the electrocatalytic reaction with immobilized 3,4-DHB, the NADH generated by the LDH reaction could be efficiently oxidized at lower potential than the unmodified carbon electrode. The analytical performance of the electrode was characterized in terms of linear sensing range and detection limit for LDH. The response from the developed biosensor was linear up to 500 U/l of LDH, and the detection limit of 50 U/l was observed at the signal-to-noise ratio of 3.     

Low potential detection of NADH based on Fe₃O₄ nanoparticles/multiwalled carbon nanotubes composite: fabrication of integrated dehydrogenase-based lactate biosensor

Fe(3)O(4) magnetic nanoparticles were in situ loaded on the surface of multiwalled carbon nanotubes (MWCNTs) by a simple coprecipitation procedure. The resulting Fe(3)O(4)/MWCNTs nanocomposite brings new capabilities for electrochemical sensing by combining the advantages of Fe(3)O(4) magnetic nanoparticles and MWCNTs. It was found that Fe(3)O(4) has redox properties similar to those of frequently used mediators used for electron transfer between NADH and electrode. The cyclic voltammetric results indicated the ability of Fe(3)O(4)/MWCNTs modified GC electrode to catalyze the oxidation of NADH at a very low potential (0.0 mV vs. Ag/AgCl) and subsequently, a substantial decrease in the overpotential by about 650 mV compared with the bare GC electrode. The catalytic oxidation current allows the stable and selective amperometric detection of NADH at an applied potential of 0.0 mV (Ag/AgCl) with a detection limit of 0.3 μM and linear response up to 300 μM. This modified electrode can be used as an efficient transducer in the design of biosensors based on coupled dehydrogenase enzymes. Lactate dehydrogenase (LDH) and NAD(+) were subsequently immobilized onto the Fe(3)O(4)/MWCNTs nanocomposite film by covalent bond formation between the amine groups of enzyme or NAD(+) and the carboxylic acid groups of the Fe(3)O(4)/MWCNT film. Differential pulse voltammetric detection of lactate on Fe(3)O(4)/MWCNT/LDH/NAD(+) modified GC electrode gives linear responses over the concentration range of 50-500 μM with the detection limit of 5 μM and sensitivity of 7.67 μA mM(-1). Furthermore, the applicability of the sensor for the analysis of lactate concentration in human serum samples has been successfully demonstrated.     

Succinate Dehydrogenase and Other Respiratory Pathways in Thylakoid Membranes of Synechocystis sp. Strain PCC 6803: Capacity Comparisons and Physiological Function

Respiration in cyanobacterial thylakoid membranes is interwoven with photosynthetic processes. We have constructed a range of mutants that are impaired in several combinations of respiratory and photosynthetic electron transport complexes and have examined the relative effects on the redox state of the plastoquinone (PQ) pool by using a quinone electrode. Succinate dehydrogenase has a major effect on the PQ redox poise, as mutants lacking this enzyme showed a much more oxidized PQ pool. Mutants lacking type I and II NAD(P)H dehydrogenases also had more oxidized PQ pools. However, in the mutant lacking type I NADPH dehydrogenase, succinate was essentially absent and effective respiratory electron donation to the PQ pool could be established after addition of 1 mM succinate. Therefore, lack of the type I NADPH dehydrogenase had an indirect effect on the PQ pool redox state. The electron donation capacity of succinate dehydrogenase was found to be an order of magnitude larger than that of type I and II NAD(P)H dehydrogenases. The reason for the oxidized PQ pool upon inactivation of type II NADH dehydrogenase may be related to the facts that the NAD pool in the cell is much smaller than that of NADP and that the NAD pool is fully reduced in the mutant without type II NADH dehydrogenase, thus causing regulatory inhibition. The results indicate that succinate dehydrogenase is the main respiratory electron transfer pathway into the PQ pool and that type I and II NAD(P)H dehydrogenases regulate the reduction level of NADP and NAD, which, in turn, affects respiratory electron flow through succinate dehydrogenase.     

Internal supply of coenzyme to an amperometric glucose biosensor based on a chemically modified electrode

A biosensor for glucose using glucose dehydrogenase immobilized on a chemically modified graphite electrode was supplied with coenzyme, nicotinamide adenine dinucleotide (NAD+), through pores in the material. A graphite rod was hollowed out, leaving 0.3 mm at the end contacting the solution, filled with 10 mM NAD+ and pressurized. The response factor was 40% of that obtained when 2 mM NAD+ was mixed with the sample solution in a flow system. The coenzyme consumption was 11 microliters h-1 representing a 500-fold saving compared to supply through the bulk solution. The biosensor had a linear calibration curve from the detection limit, 1 microM, to 2 mM glucose and a repeatability of 0.3%. The graphite electrode was modified by adsorption of a bis-(benzophenoxazinyl)-terephthaloyl derivative in order to be able to oxidize NADH at 0 mV versus Ag/AgCl, 0.1 M KCl.     

Kinetic characterization of the pyruvate and oxoglutarate dehydrogenase complexes from human heart

The Michaelis constant values for the highly purified pyruvate dehydrogenase complex (PDC) from human heart are 25, 13 and 50 microM for pyruvate, CoA and NAD, respectively. Acetyl-CoA produces a competitive inhibition of PDC (Ki = 35 microM) with respect to CoA, whereas NADH produces the same type of inhibition with respect to NAD (Ki = 36 microM). The oxoglutarate dehydrogenase complex (OGDC) from human heart has active sites with two different affinities for 2-oxoglutarate ([S]0.5 of 30 and 120 microM). ADP (1 mM) decreases the [S]0.5 values by a half. The inhibition of OGDC (Ki = 81 microM) by succinyl-CoA is of a competitive type with respect to CoA (Km = 2.5 microM), whereas that of NADH (Ki = 25 microM) is of a mixed type with respect to NAD (Km = 170 microM).     

Electrochemical reduction of xylose to xylitol by whole cells or crude enzyme of Candida peltata

In this study, whole cells and a crude enzyme of Candida peltata were applied to an electrochemical bioreactor, in order to induce an increment of the reduction of xylose to xylitol. Neutral red was utilized as an electron mediator in the whole cell reactor, and a graphite-Mn(IV) electrode was used as a catalyst in the enzyme reactor in order to induce the electrochemical reduction of NAD(+) to NADH. The efficiency with which xylose was converted to xylitol in the electrochemical bioreactor was five times higher than that in the conventional bioreactor, when whole cells were employed as a biocatalyst. Meanwhile, the xylose to xylitol reduction efficiency in the enzyme reactor using the graphite-Mn (IV) electrode and NAD(+) was twice as high as that observed in the conventional bioreactor which utilized NADH as a reducing power. In order to use the graphite-Mn(IV) electrode as a catalyst for the reduction of NAD(+) to NADH, a bioelectrocatalyst was engineered, namely, oxidoreductase (e.g. xylose reductase). NAD(+) can function in this biotransformation procedure without any electron mediator or a second oxidoreductase for NAD(+)/NADH recycling.     

Characterisation of a thermophilic L-glutamate dehydrogenase biosensor for amperometric determination of L-glutamate by flow injection analysis

Carbon paste wax electrodes incorporating thermophilic L-glutamate dehydrogenase, NADP and a polymeric toluidine blue O (poly-TBO) mediator have been characterised for the amperometric determination of L-glutamate at 313-318 K in a flow injection analysis (FIA) system. The biosensors exhibit good sensitivity, mechanical stability and reproducibilty, unlike carbon paste- or carbon wax-based electrodes under the same conditions. The carbon paste wax electrode responds linearly to L-glutamate up to 40 mM, the detection limit is 0.3 mM and the RSD (n = 10) for 5 mM L-glutamate was 7.6%. The response to some potential interferents has been quantified. Addition of finely ground hexaammineruthenium (III) trichloride ([Ru(NH3)6]Cl3) to the carbon paste wax electrodes decreases the FIA peak width and increases the peak current. The metal complex appears to accelerate the rate of oxidation of NAD(P)H by poly-TBO.     

Catalytic properties of glucose-6-phosphate dehydrogenase from pea leaves.

A homogeneous preparation of glucose-6-phosphate dehydrogenase (G6PDH, EC 1.1.1.49) with a specific activity of 3.88 U/mg protein was isolated from pea (Pisum sativum L.) leaves. The molecular mass of the G6PDH is 79 +/- 2 kD. According to SDS-PAGE, the molecular mass of the enzyme subunit is 40 +/- 3 kD. The Km values for glucose-6-phosphate and NADP are 2 and 0.5 mM, respectively. The enzyme has a pH optimum of 8.0. Mg2+, Mn2+, and Ca2+ activate the enzyme at concentrations above 1 mM. Galactose-6-phosphate and fructose-6-phosphate inhibit the G6PDH from pea leaves. Fructose-1, 6-bisphosphate and galactose-1-phosphate are enzyme activators. NADPH is a competitive inhibitor of the G6PDH with respect to glucose-6-phosphate (Ki = 0.027 mM). ATP, ADP, AMP, UTP, NAD, and NADH have no effect on the activity of the enzyme.     

Amperometric DNA sensor using the pyrroquinoline quinone glucose dehydrogenase-avidin conjugate

A new amperometric DNA sensor was constructed using a pyrroquinoline quinone glucose dehydrogenase ((PQQ)GDH) conjugated with avidin. Our aim was to specifically detect the DNA sequence of the invA virulence gene from the pathogenic bacterium Salmonella. Probe DNA with a sequence complementary to that of a specific fragment of the invA gene was immobilized onto a carbon paste electrode. After hybridization with biotinylated target DNA, (PQQ)GDH-avidin conjugate was added and the resulting electric current was measured. The electric current is generated from glucose oxidization catalyzed by (PQQ)GDH via 1-methoxyphenazine methosulphate (m-PMS) electron mediator. The sensor response increased with the addition of glucose and in the presence of 6.3 mM glucose the response increased with increasing DNA in the range 5.0x10(-8)-1.0x10(-5) M.     

Development of a carbon nanotube paste electrode osmium polymer-mediated biosensor for determination of glucose in alcoholic beverages

This paper describes a new amperometric biosensor for glucose monitoring. The biosensor is based on the activity of glucose dehydrogenase (GDH) and diaphorase (DI) co-immobilized with NAD(+) into a carbon nanotube paste (CNTP) electrode modified with an osmium functionalized polymer. This mediator was demonstrated to shuttle the electron transfer between the immobilized diaphorase and the CNTP electrode, thus, showing a good electrocatalytic activity towards NADH oxidation at potentials around +0.2V versus Ag|AgCl, where interfering reactions are less prone to occur. The biosensor exhibits a detection limit of 10 micromol L(-1), linearity up to 8 x 10(-4) mol L(-1), a sensitivity of 13.4 microA cm(-2)mmol(-1)L(-1), a good reproducibility (R.S.D. 2.1%, n=6) and a stability of about 1 week when stored dry at 4 degrees C. Finally, the proposed biosensor was applied for the determination of glucose in different samples of sweet wine and validated with a commercial spectrophotometric enzymatic kit.     

A paradoxical method for NAD(+)/NADH accumulation on an electrode surface using a hydrophobic ionic liquid

In this communication, we describe a novel and facile method for the immobilization of NAD(+)/NADH on an electrode surface using a hydrophobic ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim][Tf(2)N]). By taking advantage of the insolubility of NAD(+)/NADH in hydrophobic ionic liquids, it is expected that NAD(+)/NADH can be retained on the electrode's surface. Alcohol dehydrogenase (ADH) and NAD(+)/NADH were immobilized with a gelatin hydrogel on an electrode that was modified with an electropolymerized ruthenium complex containing 5-amino-1,10-phenanthroline (pAPRu) as a mediator for NADH oxidation. The (ADH, NAD(+))/pAPRu-immobilized electrode exhibited the electrocatalytic oxidation of ethanol in [C4mim][Tf(2)N]. The obtained catalytic current in [C4mim][Tf(2)N] was comparable to that in buffer solution containing NAD(+). It was confirmed by UV-vis spectroscopy that NAD(+) did not dissolve in the [C4mim][Tf(2)N] and was retained on the electrode's surface. Furthermore, we succeeded in constructing an ethanol/O(2) biofuel cell comprised of an (ADH, NAD(+))/pAPRu anode and a bilirubin oxidase cathode using [C4mim][Tf(2)N] as an electrolyte.     

Biochemical characterization of gapB-encoded erythrose 4-phosphate dehydrogenase of Escherichia coli K-12 and its possible role in pyridoxal 5'-phosphate biosynthesis.

One step in de novo pyridoxine (vitamin B6) and pyridoxal 5'-phosphate biosynthesis was predicted to be an oxidation catalyzed by an unidentified D-erythrose-4-phosphate dehydrogenase (E4PDH). To help identify this E4PDH, we purified the Escherichia coli K-12 gapA- and gapB-encoded dehydrogenases to homogeneity and tested whether either uses D-erythrose-4-phosphate (E4P) as a substrate. gapA (gap1) encodes the major D-glyceraldehyde-3-phosphate dehydrogenase (GA3PDH). The function of gapB (gap2) is unknown, although it was suggested that gapB encodes a second form of GA3PDH or is a cryptic gene. We found that the gapB-encoded enzyme is indeed an E4PDH and not a second GA3PDH, whereas gapA-encoded GA3PDH used E4P poorly, if at all, as a substrate under the in vitro reaction conditions used in this study. The amino terminus of purified E4PDH matched the sequence predicted from the gapB DNA sequence. Purified E4PDH was a heat-stable tetramer with a native molecular mass of 132 kDa. E4PDH had an apparent Km value for E4P [Kmapp(E4P)] of 0.96 mM, an apparent kcat catalytic constant for E4P [kcatapp(E4P)] of 200 s-1, Kmapp(NAD+) of 0.074 mM, and kcatapp(NAD+) of 169 s-1 in steady-state reactions in which NADH formation was determined. From specific activities in crude extracts, we estimated that there are at least 940 E4PDH tetramer molecules per bacterium growing in minimal salts medium plus glucose at 37 degrees C. Thin-layer chromatography confirmed that the product of the E4PDH reaction was likely the aldonic acid 4-phosphoerythronate. To establish a possible role of E4PDH in pyridoxal 5'-phosphate biosynthesis, we showed that 4-phosphoerythronate is a likely substrate for the 2-hydroxy-acid dehydrogenase encoded by the pdxB gene. Implications of these findings in the evolution of GA3PDHs are also discussed. On the basis of these results, we propose renaming gapB as epd (for D-erythrose-4-phosphate dehydrogenase).     

Purification and characterization of a dimeric phenylalanine dehydrogenase from Rhodococcus maris K-18.

NAD+-dependent phenylalanine dehydrogenase (EC 1.4.1.) was purified to homogeneity from a crude extract of Rhodococcus maris K-18 isolated from soil. The enzyme had a molecular mass of about 70,000 daltons and consisted of two identical subunits. The enzyme catalyzed the oxidative deamination of L-phenylalanine and several other L-amino acids and the reductive amination of phenylpyruvate and p-hydroxyphenylpyruvate. The enzyme required NAD+ as a natural coenzyme. The NAD+ analog 3-acetylpyridine-NAD+ showed much greater coenzyme activity than did NAD+. D-Phenylalanine, D-tyrosine, and phenylethylamine inhibited the oxidative deamination of L-phenylalanine. The enzyme reaction was inhibited by p-chloromercuribenzoate and HgCl2. Initial-velocity and product inhibition studies showed that the reductive amination proceeded through a sequential ordered ternary-binary mechanism. NADH bound first to the enzyme, followed by phenylpyruvate and then ammonia, and the products were released in the order L-phenylalanine and NAD+. The Michaelis constants were as follows: L-phenylalanine, 3.8 mM; NAD+, 0.25 mM; NADH, 43 microM; phenylpyruvate, 0.50 mM; and ammonia, 70 mM.     

Regeneration of the nicotinamide cofactor using a mediator-free electrochemical method with a tin oxide electrode

Tin (IV) oxide was made using an anodization and annealing method and was used as a working electrode in an electrochemical cofactor regeneration reaction. This material was formed with a large surface area, and by changing the preparation conditions, it was possible to control the morphology. Tin oxide has redox properties similar to those of frequently used mediators required for electron transfer between cofactors and an electrode. Therefore, by using tin oxide as a novel electrode, mediator-free electrochemical cofactor regeneration may be possible. Oxidation and reduction of the nicotinamide cofactors, NAD(P)H and NAD(P)⁺, were carried out under various reaction conditions. The results showed a high efficiency for oxidizing NADH over a broad range of pH and temperatures. The oxidation tendency of NADPH was also observed, and it demonstrated a similar reaction tendency as NADH. When using a tin oxide electrode, NAD⁺ was readily reduced to NADH, though the efficiency of this reaction was lower than for NADH oxidation. Oxidation of 2-propanol to acetone was used as a model system using alcohol dehydrogenase and the cofactor regeneration system suggested in this study. The electroenzymatic reaction showed efficient regeneration of NADP⁺ without a mediator.     

Synthesis of allysine ethylene acetal using phenylalanine dehydrogenase from Thermoactinomyces intermedius

Allysine ethylene acetal [(S)-2-amino-5-(1,3-dioxolan-2-yl)-pentanoic acid (2)] was prepared from the corresponding keto acid by reductive amination using phenylalanine dehydrogenase (PDH) from Thermoactinomyces intermedius ATCC 33205. Glutamate, alanine, and leucine dehydrogenases, and PDH from Sporosarcina species (listed in order of increasing effectiveness) also gave the desired amino acid but were less effective. The reaction requires ammonia and NADH. NAD produced during the reaction was recyled to NADH by the oxidation of formate to CO(2) using formate dehydrogenase (FDH). PDH was produced by growth of T. intermedius ATCC 33205 or by growth of recombinant Escherichia coli or Pichia pastoris expressing the Thermoactinomyces enzyme. Using heat-dried T. intermedius as a source of PDH and heat-dried Candida boidinii SC13822 as a source of FDH,98%, but production of T. intermedius could not be scaled up. Using heat-dried recombinant E. coli as a source of PDH and heat-dried Candida boidinii 98%. In a third generation process, heat-dried methanol-grown P. pastoris expressing endogenous FDH and recombinant Thermoactinomyces98% ee.     

The first archaeal L-aspartate dehydrogenase from the hyperthermophile Archaeoglobus fulgidus: gene cloning and enzymological characterization

A gene encoding an L-aspartate dehydrogenase (EC 1.4.1.21) homologue was identified in the anaerobic hyperthermophilic archaeon Archaeoglobus fulgidus. After expression in Escherichia coli, the gene product was purified to homogeneity, yielding a homodimeric protein with a molecular mass of about 48 kDa. Characterization revealed the enzyme to be a highly thermostable L-aspartate dehydrogenase, showing little loss of activity following incubation for 1 h at up to 80 degrees C. The optimum temperature for L-aspartate dehydrogenation was about 80 degrees C. The enzyme specifically utilized L-aspartate as the electron donor, while either NAD or NADP could serve as the electron acceptor. The Km values for L-aspartate were 0.19 and 4.3 mM when NAD or NADP, respectively, served as the electron acceptor. The Km values for NAD and NADP were 0.11 and 0.32 mM, respectively. For reductive amination, the Km values for oxaloacetate, NADH and ammonia were 1.2, 0.014 and 167 mM, respectively. The enzyme showed pro-R (A-type) stereospecificity for hydrogen transfer from the C4 position of the nicotinamide moiety of NADH. This is the first report of an archaeal L-aspartate dehydrogenase. Within the archaeal domain, homologues of this enzyme occurred in many Methanogenic species, but not in Thermococcales or Sulfolobales species.     

Mediatorless voltammetric oxidation of NADH and sensing of ethanol

A simple, selective and sensitive method for the detection of NADH and ethanol is presented. Self-assembled monolayers (SAMs) of mercaptopyrimidine (MPM) and their derivatives, thiocytosine (TC) and 4,6-diamino-2-mercaptopyrimidine (DMP) on gold (Au) electrode are used for the voltammetric detection of NADH and ethanol in neutral aqueous solution. A decrease of 200-300 mV in the overpotential associated with an observable increase in the peak current was obtained for the oxidation of NADH on MPM and TC monolayer-modified electrodes without any redox mediator. The facilitated electron transfer for the oxidation of NADH at the TC monolayer is ascribed to the existence of stable cationic p-quinonoid form of TC. The electrode modified with DMP monolayer could not exhibit stable response for NADH owing to the fouling of electrode surface. The MPM and TC monolayer-modified electrodes show high selectivity and excellent sensitivity (MPM: 0.633+/-0.005 microA cm(-2) microM(-1); TC: 0.658+/-0.008 microA cm(-2) microM(-1)) towards NADH with detection limit (3sigma) of 2.5 and 0.5 microM, respectively. Presence of large excess of ascorbate (AA) does not interfere the detection of NADH and the monolayer-modified electrode shows individual voltammetric peaks for AA and NADH. Voltammetric sensing of ethanol using alcohol dehydrogenase on MPM and TC monolayer-modified electrode is successfully demonstrated and these electrode can detect as low as 0.5 mM ethanol in neutral pH. The sensitivity of the MPM and TC monolayer-modified electrodes toward ethanol was found to be 3.24+/-0.03 and 3.435+/-0.04 microA cm(-2) mM(-1), respectively.     

A reagentless amperometric electrode based on carbon paste, chemically modified with D-lactate dehydrogenase, NAD(+), and mediator containing polymer for D-lactic acid analysis. I. Construction, composition, and characterization

A reagentless carbon paste electrode was designed for D-lactic acid analysis in a flow injection system for the monitoring of the production of D-lactate in a batch fermentation. D-Lactate dehydrogenase, nicotinamide adenine dinucleotide (NAD(+)), a synthetic redox polymer containing covalently attached toluidine blue O as mediator, graphite powder, and paraffin oil were used for the construction of the modified carbon paste electrode. D-Lactate selectivity was indicated by insignificant responses from a variety of possible interfernces including L-lactate. The electrodes gave a linear response in the range between 0.05 and 5 mM D-lactate, with a detecting limit of 30 muM, allowing a sample throughput of 20 h(-1). Preliminary investigations were made by covering the electrode surface with electropolymerized membranes. Satisfactory stability was observed, indicated by a reproducibility of 3.3% relative standard deviation (RSD, n = 31), with a non-membrane-covered electrode for the analysis of D-lactate in fermentation broth. A long-term stability (230 broth samples) was proven, suggesting the electrodes to have a good potential for use in on-line monitoring of fermentation processes. (c) 1995 John Wiley & Sons, Inc.     

Conversion of glycerate to serine in intact spinach leaf peroxisomes

Intact spinach (Spinacia oleracea L.) leaf peroxisomes converted glycerate to serine in the presence of NAD and alanine. The reaction proceeded optimally at pH9. Addition of oxaloacetate or alpha-ketoglutarate plus aspartate enhanced the conversion about three-fold. Alteration of the concentration of one of the reaction components, consisting of 2 mM glycerate, 0.2 mM NAD, 0.5 mM oxaloacetate, and 2 mM alanine, revealed half-saturation constants of 0.45 mM for glycerate, 0.06 mM for NAD, 0.02 mM for oxaloacetate, and 0.33 mM for alanine. The conversion proceeded with the formation of hydroxypyruvate followed by serine; hydroxypyruvate did not accumulate to a high amount in the presence or absence of alanine. The amino group donor could be alanine (half-saturation constant, 0.33 mM), glycine (0.45 mM), or asparagine (0.67 mM); the three amino acids produced roughly similar Vmax values. The results indicate that, in the conversion of glycerate to serine, the transamination is catalyzed by a hydroxypyruvate aminotransferase with characteristics unknown among all other studied leaf peroxisomal aminotransferases. The peroxisomal membrane is sparsely permeable to NAD/NADH, and the participation of the peroxisomal malate dehydrogenase in an electron shuttle system across the membrane in the regeneration of NAD/NADH is suggested.     

Amperometric mediated carbon paste biosensor based on D-fructose dehydrogenase for the determination of fructose in food analysis

A new mediated amperometric biosensor for fructose is described. The sensor is based on a commercially available D-fructose dehydrogenase. The enzyme is incorporated in a carbon paste matrix containing Os(bpy)₂Cl₂ as redox mediator that achieves electron transfer at 0·1 V (versus Ag/AgCl) with maximum apparent current densities of 1·2 mA/cm². The dependence of the steady-state current on the loading of the mediator and the enzyme, other electrode construction parameters, the operating potential, the pH and the temperature was studied. In the steady-state mode the response current was directly proportional to D-fructose concentration from 0·2 to 20mM with a detection limit of 35 μM (signal-to-noise ratio, S/N, 3). In the flow injection analysis mode the response current was directly proportional to D-fructose concentration from 0·5 to 15 M with a detection limit of 115 μM (S/N 3). The sensor was used for the determination of fructose in food samples in a flow injection system and validated with a commercial enzyme kit.